Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 266 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 266 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Set a Business Of Automated Vehicle Scrapping Unit

As people become more aware of pollution and the need to reduce carbon emissions by limiting vehicle use and preventing old, unused vehicles from being parked for extended periods of time and becoming environmental hazards, vehicle scrapping units, also known as scrapyards, are now playing a significant role in the waste management industry. The recycling of vehicles from a scrap yard will not only help your town maintain a clean environment, but it will also increase your income. By ensuring that old, rusted, and unwanted vehicles are quickly and correctly disposed of, without posing a harm to the environment or to those strolling by them, a vehicle scrapping unit contributes to the safety of your town. End-of-life automobiles are transported to an automated vehicle scrapping unit where they are disassembled and recycled. The process is quicker and more effective than conventional techniques because it is entirely automated. Such a unit would require an expenditure of approximately €1 million for the machinery, approximately €150 000 for the building, and approximately €150 000 for the machinery. It guarantees that the recycling process protects both the environment and human health at the same time. Before being transported for sale or storage, scrap metal is melted down and reshaped into new goods in order to optimize this effect. As a result, the procedure is less expensive and more efficient. Because they would require too much room if they were inside big cities, the majority of these facilities are situated outside of them. Instead, they are constructed close to ports or other transportation hubs to enable export of the scrap metal. Steel scrap, for example, can often only be recycled once or twice before it gets too small to be profitable. Uses and Application Any company that deals with the recycling of automobiles can benefit greatly from the inclusion of an automated vehicle scrapping equipment. It not only saves time and money, but it also contributes to environmental preservation. Here are just a few of the numerous functions and purposes of an automated vehicle recycling device. This process produces scrap metal, which is subsequently recycled in other manufacturing procedures, which is better for the environment because it reduces the waste of natural resources. Additionally, even though not all metals can be recycled, reprocessing can still be used to incorporate components like copper or aluminium into new products. As a result, less raw material must be mined or drilled from the Earth's crust, reducing waste. • Environmental Benefits - Steel is one of a car's primary building materials; the bulk of its parts, including its structure, are made of steel. • Wildlife Protection - Another factor to take into account is the possibility that ethical car recycling can aid in the preservation of the local flora and fauna. Because soil degradation and erosion are caused by steel mining, which is not environmentally friendly, animals cannot maintain their usual routines and May even develop ill as a result. • Reuse of Vehicle Parts - Recycling vehicles not only safeguards the environment, but also enables the reuse of parts that help preserve Earth's limited resources. • Energy and resource conservation - Recycling of vehicles guarantees that steel is recycled rather than newly made, which lowers the release of greenhouse gases into the atmosphere. Additionally, since melting down existing steel is more energy-efficient than refining iron ores, it aids in energy conservation. • Create Space - Of course, making area in your garage, driveway, or parking space is one of the main advantages of scrapping your car. Indian Market In 2021, the market for recycling vehicles in the United Kingdom was worth US$1.64 billion. The market is predicted by IMARC Group to grow at a CAGR of 6.3% from 2022 to 2027, reaching US$ 2.35 billion. In the upcoming years, it is anticipated that the Indian market for automated car scrapping machines will expand dramatically. This is a result of the rising annual number of vehicles being trashed. Finding qualified workers to run the equipment will be this industry's biggest hurdle. The present administration is actively working to improve the environment, and they have introduced a new ELV policy that forbids diesel and gasoline vehicles that are ten years old or older; if this policy is put into place, pollution levels might drop by about 24%. In order to lessen environmental pollution, the government is also promoting the usage of these devices.
Plant capacity: Steel Scrap:6,000 Units Per Annum Aluminum Scrap:900 Units Per Annum Copper Scrap:150 Units Per Annum Plastics:1000 Units Per Annum Old Lube Oil:60 Kl Per Annum Battery:12000 Nos Per Annum Rubber Scrap:200 Units PerAnnum Glass Scrap:200 Units Per AnnumPlant & machinery: 325 Lakhs
Working capital: -T.C.I: Cost of Project:1455 Lakhs
Return: 26.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Start Profitable Business of Milk Processing (Milk and Milk Powder) | Right time to become a Milk Processing manufacturer

The dairy industry in India has been witnessing rapid growth. The liberalized economy provides more. Opportunities for MNCs and foreign investors to release the full potential of this industry. The main aim of the Indian dairy industry is only to better manage the national resources to enhance milk production and upgrade milk processing using innovative technologies. Some properties of milk are: ghee, cheese, curd etc. Milk is very important part of human life and it is the main food of nutrients for human being. Anyone might want to capitalize on the largest and fastest growing milk and milk products market. That’s why dairy is most common and beneficial industry. Visit this Page for More Information: Start a Business in Dairy & Milk Processing Industry Uses/Applications: An automatic milk processing plant can be used for various purposes, such as producing milk powder, cheese, butter, and yogurt. The plant can also be used to process raw milk into pasteurized milk. The main benefits of setting up an automatic milk processing plant are the increased efficiency and safety. Automation saves time by eliminating manual labor in milk handling and milk processing steps, making it more cost-effective in the long run. With less risk of contamination due to human error, consumers get fresher products with better quality control. Related Business Plan: Dairy Farm for Milk Production Manufacturing Process: 1. The first step is to gather all of the supplies. This includes a milk processing plant, milk powder, and containers to store the finished product. 2. You will need to set up the processing plant according to the manufacturer's instructions. 3. Once the plant is set up, you can begin adding milk powder to the machine. 4. The machine will then process the milk powder and produce milk that is ready to drink. Read Similar Articles: MILK & DAIRY PRODUCTS 5. To make milk powder, you will mix water with powdered milk in a container until it has an even consistency. Watch Video: Market Research Report on Milk Processing | Dairy Products in India by NPCS Benefits of starting Epoxy Milk Processing Automatic Plant (Milk and Milk Powder) business: There are many benefits to starting a milk processing automatic plant business. 1. Will be able to provide a high-quality product to your customers. 2. You will be able to create jobs for people in your community. 3. You will be able to generate income for yourself and your family. 4. You will be able to improve the quality of life for people in your community. 5. You will be able to make a positive impact on the environment. 6. You will also be able to control the price of your product, as well as the packaging and branding. 7. Another benefit is that you can automate the production process, which will save you time and money. Related Feasibility Study Reports: Milk & Dairy Products, Butter, Cheese, Ghee, Ice Creams, Chocolate, Curd, Lassi, Flavored Milk , UHT Milk, Fluid Milk, Milk Powder, Skimmed Milk Powder Non-Dairy Cream, Buttermilk, Condensed Milk, Cottage Cheese, Casein, Yogurt, value added Dairy Products Market size in India: The global Dairy Processing Equipment market is anticipated to reach a value of around USD 14.3 million by 2028. The industry has a promising growth potential due to a number of reasons, including increased automation in dairy product processing and increasing supply and consumption of milk and other dairy products. The industry is expanding as people become more aware of the health and nutritional benefits that dairy products have. As a result, dairy processing firms are concentrating on low-fat, organic, and nutrient-fortified dairy products, which necessitate the use of sophisticated dairy processing machinery. Read our Books Here: Milk Processing, Dairy & Dairy Products, Poultry Industries Global market outlook: The growing demand for processed milk and milk powder in developing countries is the key factor driving the growth of the milk processing industry. The rising demand for dairy products, coupled with the increasing trend of automation in the food and beverage industry, is driving the growth of this market. Watch other Informative Videos: Food Processing and Agriculture Based Projects Industry Major Market Players: • Danone • Nestle • FrieslandCampina • Arla • Vreugdenhil Dairy • Alpen Dairies • California Dairies • DFA • Lactalis • Land O’Lakes • Fonterra • Westland • Tatura • Burra Foods • MG • Ausino • Yili • Mengniu • Feihe • Wondersun See More Links: • Start a Business in Asia • Start a Business in Potential Countries for Doing Business • Best Industry for Doing Business • Business Ideas with Low, Medium & High Investment • Looking for Most Demandable Business Ideas for Startups • Startup Consulting Services • Start a Business in Africa • Start a Business in India • Start a Business in Middle East • Related Videos • Related Books • Related Projects • Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing Of Red Chilli Oleoresin

A pure natural extract of chilli peppers is called chilli oleoresin. It has a strong, pungent flavor and is used as a spice and food flavoring. Chili peppers are ground up and their oils are extracted to create chilli oleoresin. The end result is a potent, thick, scarlet paste that is extremely concentrated. It may greatly increase the heat and flavor of meals when used in cooking. Oleoresins are viscous substances that resemble resin that are produced when a spice is extracted using a hydrocarbon solvent. Vacuum distillation is used to extract the solvent and reuse it. Oleoresins are weaker than the comparable essential oils and have flavors that are between 5 and 20 times stronger than the corresponding spices. A natural food colouring agent called paprika oleoresin is used to give foods with a liquid/fat phase a deep red hue. At room temperature, the oleoresin is a homogenous, slightly viscous crimson liquid with acceptable flow characteristics. Although there is a significant potential for exporting natural colouring agents in the worldwide markets, particularly paprika with low pungency and high colour value, the paprika kind of chilli is now farmed in very small quantities in restricted locations in India. Capsaicin, the compound that gives chilli peppers their distinctive heat, is the primary active component in chilli oleoresin. Numerous other health advantages of chilli oleoresin, such as its capacity to reduce pain, enhance circulation, and speed up metabolism, are also attributed to capsaicin. Uses and Application Chili oleoresin can be utilized to produce distinctive flavors, colors, and textures in the food sector. Additionally, it can be used as an ingredient in non-food products like cosmetics, detergents, plastics, and medications. That is adaptable to many different dishes. It is ideal for adding heat and flavor to sauces, marinades, stews, and soups. Additionally, it can be applied to meats or vegetables as a rub. Additionally, it is utilized in a few Western cuisines, most notably Texas-style chilli. It has many uses, such as a natural colorant, a food flavoring, and a component in cosmetics and personal care products. Sauces, soups, and marinades can all benefit from the heat and flavor that chilli oleoresin provides. It can also be used to give soaps and creams blazing crimson colours. Chili oleoresin, a substance used in cosmetics, can give lipsticks and other products a rich red hue. Indian Market It has many uses, such as a natural colorant, a food flavoring, and a component in cosmetics and personal care products. Sauces, soups, and marinades can all benefit from the heat and flavor that chilli oleoresin provides. It can also be used to give soaps and creams blazing crimson colours. Chili oleoresin, a substance used in cosmetics, can give lipsticks and other products a rich red hue. One of the top producers and exporters of spice oleoresins is India. Despite this, there is almost no or very little domestic demand for this commodity. Pepper, ginger, cardamom, chilli, turmeric, celery, and other spices are the principal oleoresins/oils produced and exported from India. About 80% of India's total production is exported, primarily to the USA, Canada, and West Europe. According to an international survey, there is an estimated 1800 MT demand for spice oleoresins. India makes up about 50% of this. There are now 12 manufacturing and exporting facilities in India. Due to the fact that the utilization mostly depends on export demand, they are not operating at full capacity. In this situation, it would be wise to pursue market alliances in order to ensure sales and secure a piece of the present and future demand for various goods. Oleoresins are gaining popularity in the beverage sector because they have an excellent foundation flavor and a simple flavor character. In addition, these are used to give natural color to beverages, which raises the demand for oleoresins and, as a result, the market's expansion. Oleoresins come in a vast variety, giving manufacturers the chance to create new or enhanced natural foods and flavorings. Instead of utilizing flavorful marinades, some manufacturers prepare their marinades and other forms of spices. In addition, the usage of oleoresins in the preparation of sauces, marinades, mayonnaise, and pickles drives up demand for them. Industry Major Market Players: 1.Chenguang Biotech Group Co. Ltd. 2.Kancor Ingredients Ltd. 3.Kalsec Inc. 4.Universal Oleoresins 5.Givaudan 6.Akay Group Ltd. 7.Synthite Industries Ltd. 8.AVT 9.Indo-World 10.Paprika Oleo's India Limited 11. Paras Perfumers 12. Manohar Botanical Extracts Pvt. Ltd. 13. Naturite Agro Products Ltd 14. MRT GREEN PRODUCTS 15. All-Season Herbs 16. TMV Aroma 17. Plant Lipids 18. Ozone Naturals
Plant capacity: Chilli Oleoresin:6,250 Kg Per DayPlant & machinery: 1988 Lakhs
Working capital: -T.C.I: Cost of Project:3250 Lakhs
Return: 25.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Production Of Chilli Oleoresin

A natural food coloring agent called paprika oleoresin is used to give foods with a liquid/fat phase a deep red hue. At room temperature, the oleoresin is a homogenous, slightly viscous crimson liquid with acceptable flow characteristics. Although there is a significant potential for exporting natural coloring agents in the worldwide markets, particularly paprika with low pungency and high color value, the paprika kind of chilli is now farmed in very small quantities in restricted locations in India. Oleoresins are viscous substances that resemble resin that are produced when a spice is extracted using a hydrocarbon solvent. Vacuum distillation is used to extract the solvent and reuse it. Oleoresins are weaker than the comparable essential oils and have flavors that are between 5 and 20 times stronger than the corresponding spices. A natural food coloring agent called paprika oleoresin is used to give foods with a liquid/fat phase a deep red hue. At room temperature, the oleoresin is a homogenous, slightly viscous crimson liquid with acceptable flow characteristics. Although there is a significant potential for exporting natural coloring agents in the worldwide markets, particularly paprika with low pungency and high color value, the paprika kind of chilli is now farmed in very small quantities in restricted locations in India. Capsaicin, the compound that gives chilli peppers their distinctive heat, is the primary active component in chilli oleoresin. Numerous other health advantages of chilli oleoresin, such as its capacity to reduce pain, enhance circulation, and speed up metabolism, are also attributed to capsaicin. Uses and Application That is adaptable to many different dishes. It is ideal for adding heat and flavour to sauces, marinades, stews, and soups. Additionally, it can be applied to meats or vegetables as a rub. Additionally, it is utilized in a few Western cuisines, most notably Texas-style chilli. It can also be used to give soaps and creams blazing crimson colours. Chili oleoresin, a substance used in cosmetics, can give lipsticks and other products a rich red hue. Oleoresin capsicum, which is frequently used as the base for tear gases, is one of the more medicinally useful oleoresins. Additionally, they are known to be used as food coloring agents, soaps, and cosmetics. The world's most popular natural red color is that of this object. Applications: Due to its pungent effect, it is employed as a flavoring agent in food products. Chilli oleoresin is a typical coloring agent used to add a variety of red colours to foods, beverages, and medications. Safety equipment: It can temporarily blind a person and is used to manufacture safety equipment for girls. Capsaicinoids serve as a preservative by protecting meat and other food products from microbial growth. Indian Market By 2030, the global oleoresins market is projected to develop at a CAGR of 6.04% and reach 2.27 billion. Oleoresins are volatile or non-volatile substances that are generated when spices are extracted using non-aqueous solvents. One of the top producers and exporters of spice oleoresins is India. Despite this, there is almost no or very little domestic demand for this commodity. Pepper, ginger, cardamom, chilli, turmeric, celery, and other spices are the principal oleoresins/oils produced and exported from India. About 80% of India's total production is exported, primarily to the USA, Canada, and West Europe. Oleoresins are gaining popularity in the beverage sector because they have an excellent foundation flavor and a simple flavor character. In addition, these are used to give natural color to beverages, which raises the demand for oleoresins and, as a result, the market's expansion. Oleoresins come in a vast variety, giving manufacturers the chance to create new or enhanced natural foods and flavorings. Instead of utilizing flavorful marinades, some manufacturers prepare their marinades and other forms of spices. In addition, the usage of oleoresins in the preparation of sauces, marinades, mayonnaise, and pickles drives up demand for them. Industry Major Market Players: 1.Chenguang Biotech Group Co. Ltd. 2.Kancor Ingredients Ltd. 3.Kalsec Inc. 4.Universal Oleoresins 5.Givaudan 6.Akay Group Ltd. 7.Synthite Industries Ltd. 8.AVT 9.Indo-World 10. Paprika Oleo's India Limited 11. Paras Perfumers 12. Manohar Botanical Extracts Pvt. Ltd. 13. Naturite Agro Products Ltd 14. MRT GREEN PRODUCTS 15. All-Season Herbs 16. TMV Aroma 17. Plant Lipids 18. Ozone Naturals
Plant capacity: Chilli Oleoresin:7,500 Kg Per DayPlant & machinery: 2192 Lakhs
Working capital: -T.C.I: Cost of Project:3533 Lakhs
Return: 27.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

ZINC INGOTS Manufacturing Business | Best Idea For Startup Business

Zinc ingot is a block or bar of pure zinc metal that is white or grey in color and suitable for further metal processing. Solid-state, crystallization, and ultra-high purification procedures, including sublimation, are used to create the zinc ingot. With the atomic number 30 and the symbol Zn, zinc is a chemical element. At normal temperature, zinc is a slightly brittle metal that, when its oxidation is eliminated, appears silvery-grey. It is the first element in the periodic table's group 12 (IIB). Zinc and magnesium share a few chemical characteristics, including a single normal oxidation state (+2) and similar-sized Zn2+ and Mg2+ ions. With an annual production of around 13 million tonnes, zinc is the fourth most used metal after iron, aluminium, and copper. Nyrstar, a result of the amalgamation of the Australian OZ Minerals and the Belgian Umicore, is the largest producer of zinc in the world. Mining accounts for over 70% of the world's zinc production, with secondary zinc recycling providing the remaining 30%. Special High Grade, frequently abbreviated as SHG, is the name given to commercially pure zinc, which is 99.995% pure. Uses and Application Many different items, including paints, rubber, cosmetics, medications, plastics, inks, soaps, batteries, textiles, and electrical equipment, are made using zinc oxide. Galvanizing is the process of coating steel items with zinc to make them corrosion-resistant. There are various steel objects that are galvanised, including steel furniture, buildings, cars, and appliances for the home. Zinc Oxide: A zinc compound, zinc oxide is used to vulcanize a variety of goods, including paint, ceramics, and rubber. Die Castings: A variety of electronic parts, hardware fixtures, electrical equipment, etc., employ zinc die cast alloy. Alloys: Brass is an alloy created from copper and zinc. Industries: The pure, extremely malleable, high-strength zinc ingots are utilised in a variety of industries, including furniture, rubber, automobiles, batteries, and chemicals. Indian Market Prices, which have risen 18% since the beginning of this month and are now above $3,500 per tons, have risen as a result of Nyrstar, one of the world's largest metals groups, saying that it will reduce production at its three European smelters by 50%. Price stability is anticipated up till the power situation is addressed. The market will develop as a result of the rising demand for zinc ingots in hot-dip galvanized steel. The steel items are submerged in a pool of molten zinc ingots during the hot-dip galvanizing process so that the melted zinc ingots can be applied to all of the steel's exposed surfaces. As a result, galvanized steel is given exceptional strength and is also shielded against corrosion. Additionally, zinc ingots are employed in the manufacturing of batteries. When combined with a dry cell battery housed in a metal casing, they cause a chemical reaction that generates a voltage potential between the connections. Therefore, the market's expansion will be fueled by the increasing demand for zinc ingots from these applications. Industry Major Market Players: 1.Roto Metals 2.Pushpa International 3.Exporters India 4.Hindustan Zinc 5.Nyrstar 6.Industrial Metal Supply Co. 7.Adwameg Inc. 8.Phoenix Industries Ltd. 9.Siyaram Impex Pvt. Ltd. 10. Shree Metal Industries. 11. Focus Technology Co. 12. Ltd. 13. S.C Kundu & Sons
Plant capacity: Zinc Ingots (Purity 98%):6 MT Per DayPlant & machinery: 124 Lakhs
Working capital: -T.C.I: Cost of Project:863 Lakhs
Return: 29.00%Break even: 65.00%
Add to Inquiry Add to Inquiry Basket

Start a Production Business of Low Relaxation Pre-stressed Concrete Steel Strand (LRPC)

From the 1950s onward, Low Relaxation Due to its distinctive advantages, pre-stressed concrete steel strand has become more and more common in the construction business. Minimal relaxation Steel utilized in the construction sector is called pre-stressed concrete steel strand. This kind of steel is renowned for having a high strength and little relaxation. Applications involving pre-stressed concrete frequently use LRPC steel strand. These steel's high strength, low relaxation characteristics, and corrosion resistance are its key advantages. The steel is a great option for use in structural applications because it is also resistant to corrosion and has a high fatigue strength. LRP is superior to other kinds of steel in a number of ways, including its resistance to corrosion and capacity to keep its shape under heavy loads. In comparison to other forms of steel, it has a variety of advantages, including a high strength-to-weight ratio, low relaxation properties, and corrosion resistance. Pre-stressed steel strands' primary qualities include high strength, good relaxation performance, and a generally straight appearance when unfurled. Common grades of steel with high tensile strength include those with yield strengths of 1860, 1720, and 1770 MPa. Minimal relaxation a form of steel used in pre-stressed concrete is called steel strand. Because it has a low relaxation rate, it holds its tension longer than other kinds of steel. This makes it perfect for usage in highly stressed concrete constructions like bridges and buildings. Minimal relaxation Pre-stressed Concrete Steel Strand is a fantastic option for outdoor applications since it resists corrosion better than other kinds of steel. Uses and Application Pre-stressed concrete is a process of adding high-strength steel strands or bars, often known as pre-stressing tendons, to concrete or other building materials to reinforce them. Pre-stressing is intended to increase the material's stability and tensile strength. Minimal relaxation a pre-stressing technique that has several benefits over conventional pre-stressing techniques is pre-stressed concrete steel strand. High-strength, low-relaxation pre-stressed concrete steel strand is used in pre-tensioning and post-tensioning, among other applications. Minimal relaxation Compared to conventional pre-stressed concrete, pre-stressed concrete steel strand has a variety of advantages, including better ductility, a higher yield strength, and more resilience to fatigue and creep. It is frequently applied in the construction sector. It has a variety of advantages that make it the best option for numerous applications. 1. Because of its strength and durability, it is ideal for use in constructions that must be able to withstand a lot of stress. 2. It has a high level of corrosion resistance, making it more durable than other kinds of steel. 3. You don't need to be concerned about fractures or issues with your building caused by climatic changes because it doesn't contract or expand when exposed to moisture. 4. Regardless of financial restrictions, any project can employ this type of steel because it is so reasonably priced. Indian Market During the projected period of 2019–2024, the pre-stressed concrete steel strand market is anticipated to expand at a CAGR of 5.5%. Pre-stressed concrete steel strand is anticipated to have the greatest market in the Asia-Pacific region, followed by North America and Europe. The expansion of the construction sector in nations like China, India, and Japan is primarily responsible for the growth in the Asia-Pacific area. In the coming years, a sizable increase in demand for low relaxation pre-stressed concrete steel strand is anticipated in India. This is a result of the growing need for infrastructure development as well as the want for quicker and more effective construction techniques. Pre-stressed concrete steel strand is in high demand in India due to the country's burgeoning building market. Industry Major Market Players: 1.Jindal Steel & Power 2.Tata Steel 3.SAIL 4.Limited Company (Ltd. / Pvt. Ltd.)
Plant capacity: Low Relaxation Pre-stressed Concrete Steel Strand (LRPC):83.3 MT Per Day Plant & machinery: 3561 Lakhs
Working capital: -T.C.I: Cost of Project:5370 Lakhs
Return: 25.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Set Up Banana Ripening Chamber

A controlled environment where temperature, humidity, and ventilation may be adjusted to hasten the ripening of bananas is known as a "banana ripening chamber." Controlling the ripeness of your bananas is easy with a banana ripening chamber. The chamber regulates the temperature, humidity, and ventilation to produce the ideal environment for bananas to ripen. The ripening process can be sped up or slowed down in the chamber by adjusting these variables. Increase the temperature in the chamber and decrease airflow by closing vents to hasten the ripening of your bananas. Reduce the temperature in the chamber and boost ventilation by opening vents to prolong the ripening of your bananas. Fruit one of the fruits that ripens best off the plant is the banana. Bananas for domestic use are cut green and stored in moist, shady settings to ripen gradually even in tropical growing regions. The starch in bananas transforms into sugar as they ripen. So, a banana will taste sweeter the riper it is. Using ethylene gas to artificially ripen bananas is a common commercial practice. The natural development of fruits is sped up by a chemical made by the fruits. It's crucial to keep an eye on the temperature while fruit ripens. Typically, a temperature range of 14.5 C to 16.5 C will be suitable. Types of Bananas: 1. Ice Cream Banana Tree. 2. Cavendish Banana. 3. Manzano Banana. 4. Dwarf Cavendish Banana. 5. Dwarf Plantain. Uses and Application A controlled environment with regulated humidity and temperature is known as a "banana ripening chamber." Bananas can ripen uniformly and securely in the chamber since it replicates the tropical environments where they are farmed. Other fruits including avocados, mangoes, and papayas can also be allowed to ripen in chambers. The majority of the time, bananas are harvested when they are still green and unripe and then transferred to a facility where they are placed in ripening chambers. The chamber regulates the environment's temperature and humidity, hastening the bananas' ripening. To ensure that your bananas are ripe when you want them to be, controlling the ripening process is easy with a banana ripening chamber. Additionally, it can be applied to additional fruits and vegetables. You may significantly increase the shelf life of your bananas by using a ripening chamber. You can keep bananas fresh for up to two weeks if you allow them to ripen in a controlled setting. Also, additional fruits and vegetables can be kept in ripening chambers. Indian Market Banana ripening chamber sales in India are expanding quickly. This is because there is a growing market for fresh bananas, and they must ripen in a controlled atmosphere. Controlling the ripening of bananas is easy and successful with a banana ripening chamber. You can guarantee that your bananas are ripe and prepared for consumption when you want them by managing the temperature and humidity. Many tropical and subtropical regions of India produce a significant amount of bananas as a fruit crop. A total of 29,779.91 thousand tons are produced annually in India, where it is grown on an area of 830.5 thousand acres. Tamil Nadu, Maharashtra, Gujarat, Andhra Pradesh, and Karnataka are the principal banana-producing states. The greatest market for banana ripening chambers is anticipated to be in the Asia-Pacific region, followed by North America and Europe. The market for banana ripening chambers is anticipated to develop as a result of the rising demand for bananas and the rising demand for controlled environment storage. Although numerous businesses produce these chambers, there is still a sizable market for them. Industry Major Market Players: 1.Fully automatic system 2.Carbide free technology 3.User friendly design
Plant capacity: Ripe Banana:8 MT per dayPlant & machinery: 32 Lakhs
Working capital: -T.C.I: Cost of Project:193 Lakhs
Return: 23.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of Double Wall Corrugated Pipes | Great Investment Opportunity

The material used to create double wall corrugated (DWC) pipes is high-density polyethylene (HDPE). They feature a smooth inner wall and an outside wall with corrugations. The pipe's corrugations provide it strength and stiffness, and its smooth inner wall improves water flow. The sizes, lengths, and thicknesses of DWC pipes vary. DWC (double wall corrugated) pipes are a sturdy and long-lasting option for irrigation systems. DWC pipes are constructed from two layers of high-density polyethylene (HDPE), one of which is corrugated and the other of which is smooth. Superior strength and flexibility are provided by this design, which also offers defense against damage from root incursion. If you wish to create your own sprinkler system or even utilize it as part of a bigger commercial application, DWC pipes work well in both gravity flow and pressure flow applications. Longevity is a hallmark of these pipes. To meet your demands, DWC pipes come in a range of sizes and lengths. Because they have an air space that acts as insulation against freezing water, which can lead to pipe breaks, WC pipes are great for protecting against frost. To boost strength and resistance to abrasion when buried underground, the interior of the pipe is ribbed. An underground drainage system using double wall corrugated (DWC) pipes is intended to remove extra water from the area around your property. It is an eco-friendly product that combines steel's tensile strength with plastic's resistance to corrosion. The pipe's corrugations provide it stiffness and strength, and its smooth inner layer facilitates simple water movement. Uses and Application 1. Double wall corrugated (DWC) pipes are best for irrigation systems that are buried underground. 2. DWC pipes are strong and corrosion-resistant due to their high-density polyethylene (HDPE) construction. 3. DWC pipes have a smooth inside surface that promotes greater water flow and less clogging. 4. To match your needs, DWC pipes come in a range of sizes and lengths. 5. Double wall corrugated pipe can be purchased in rolls or sections, making it simple to use on your own land. 6. Weep holes are constructed into the interior of a DWC pipe to help minimise pooling, stop roots from sprouting inside the pipe, and lessen clogs at low areas in the ground. 7. DWC pipes are seamless and available in black, grey, white, green, and blue, among other hues. 8. A variety of soil types, including clayey soils, sandy soils, salty soils, and loamy soils, can be drained using DWC pipes. 9. Despite being built of HDPE, they are not fragile, making it simple to cut them using hand tools like hacksaws. 10. In fact, most sectors, including breweries, use these pipes due to their longevity in their applications. 11. These pipes are affordable and quite simple to install. Indian Market Over the projection period, it is anticipated that the market for double wall corrugated pipes will expand at a CAGR of 5.5%. (2019-2024). the necessity for affordable and long-lasting piping systems, as well as the rising need for water and wastewater management, are the main factors driving this industry. The need for double-wall corrugated pipes is rising across a variety of industries, including construction, water treatment, municipal drainage, and others, which is what is driving the market expansion. One kind of plastic pipes created from high-density polyethylene is HDPE double-wall corrugated pipe. It is appropriate for application in a variety of industries, including the oil and gas, chemical, food processing, and beverage processing industries, thanks to its outstanding chemical and temperature resistant capabilities. Due to HDPE's exceptional flexibility, it can be installed in confined locations where other piping materials cannot. Industry Major Market Players: 1.Jain Irrigation Systems 2.POLIECO 3.ADS 4.KUZEYBORU 5.Corma Inc. 6.TIJARIA 7.Bina Plastic Industries Sdn Bhd 8.Euro EM 9.Pars Ethylene Kish 10. RESINTECH 11. WEIDA 12. HEBEISH 13. REHAU 14. VESBO 15. JM Eagle 16. Junxing Pipe Group 17. Rong Long Building Materials, 18. Oregon Plastic Tubing, 19. Contech Engineered, 20. Dura-Line (Audax Group), 21. Plasson USA, 22. WL Plastics, 23. Chevron Phillips Chemical, 24. Crumpler Plastic Pipe,
Plant capacity: Double Wall Corrugated Pipes:20 MT Per DayPlant & machinery: 449 Lakhs
Working capital: -T.C.I: Cost of Project:1271 Lakhs
Return: 27.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of Double Wall Corrugated Pipes Great|Investment Opportunity

The material used to create double wall corrugated (DWC) pipes is high-density polyethylene (HDPE). They feature a smooth inner wall and an outside wall with corrugations. The pipe's corrugations provide it strength and stiffness, and its smooth inner wall improves water flow. The sizes, lengths, and thicknesses of DWC pipes vary. DWC (double wall corrugated) pipes are a sturdy and long-lasting option for irrigation systems. DWC pipes are constructed from two layers of high-density polyethylene (HDPE), one of which is corrugated and the other of which is smooth. Superior strength and flexibility are provided by this design, which also offers defense against damage from root incursion. If you wish to create your own sprinkler system or even utilize it as part of a bigger commercial application, DWC pipes work well in both gravity flow and pressure flow applications. Longevity is a hallmark of these pipes. To meet your demands, DWC pipes come in a range of sizes and lengths. Because they have an air space that acts as insulation against freezing water, which can lead to pipe breaks, WC pipes are great for protecting against frost. To boost strength and resistance to abrasion when buried underground, the interior of the pipe is ribbed. An underground drainage system using double wall corrugated (DWC) pipes is intended to remove extra water from the area around your property. It is an eco-friendly product that combines steel's tensile strength with plastic's resistance to corrosion. The pipe's corrugations provide it stiffness and strength, and its smooth inner layer facilitates simple water movement. Uses and Application 1. Double wall corrugated (DWC) pipes are best for irrigation systems that are buried underground. 2. DWC pipes are strong and corrosion-resistant due to their high-density polyethylene (HDPE) construction. 3. DWC pipes have a smooth inside surface that promotes greater water flow and less clogging. 4. To match your needs, DWC pipes come in a range of sizes and lengths. 5. Double wall corrugated pipe can be purchased in rolls or sections, making it simple to use on your own land. 6. Weep holes are constructed into the interior of a DWC pipe to help minimise pooling, stop roots from sprouting inside the pipe, and lessen clogs at low areas in the ground. 7. DWC pipes are seamless and available in black, grey, white, green, and blue, among other hues. 8. A variety of soil types, including clayey soils, sandy soils, salty soils, and loamy soils, can be drained using DWC pipes. 9. Despite being built of HDPE, they are not fragile, making it simple to cut them using hand tools like hacksaws. 10. In fact, most sectors, including breweries, use these pipes due to their longevity in their applications. 11. These pipes are affordable and quite simple to install. Indian Market Over the projection period, it is anticipated that the market for double wall corrugated pipes will expand at a CAGR of 5.5%. (2019-2024). the necessity for affordable and long-lasting piping systems, as well as the rising need for water and wastewater management, are the main factors driving this industry. The need for double-wall corrugated pipes is rising across a variety of industries, including construction, water treatment, municipal drainage, and others, which is what is driving the market expansion. One kind of plastic pipes created from high-density polyethylene is HDPE double-wall corrugated pipe. It is appropriate for application in a variety of industries, including the oil and gas, chemical, food processing, and beverage processing industries, thanks to its outstanding chemical and temperature resistant capabilities. Due to HDPE's exceptional flexibility, it can be installed in confined locations where other piping materials cannot. Industry Major Market Players: 1.Jain Irrigation Systems 2.POLIECO 3.ADS 4.KUZEYBORU 5.Corma Inc. 6.TIJARIA 7.Bina Plastic Industries Sdn Bhd 8.Euro EM 9.Pars Ethylene Kish 10. RESINTECH 11. WEIDA 12. HEBEISH 13. REHAU 14. VESBO 15. JM Eagle 16. Junxing Pipe Group 17. Rong Long Building Materials, 18. Oregon Plastic Tubing, 19. Contech Engineered, 20. Dura-Line (Audax Group), 21. Plasson USA, 22. WL Plastics, 23. Chevron Phillips Chemical, 24. Crumpler Plastic Pipe,
Plant capacity: Double Wall Corrugated Pipes:20 MT Per DayPlant & machinery: 449 Lakhs
Working capital: -T.C.I: Cost of Project:1271 Lakhs
Return: 27.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Setting Up Mini Steel Plant (Billets and TMT Bar)

An integrated steel mill, which creates and refines iron and steel, is scaled down to create a micro steel factory. Due to its lower investment costs and flexibility, the micro steel plant, a novel idea in the steel industry, has gained appeal recently. Mini steel plants come in a wide variety, each with unique benefits and drawbacks. Concrete, blocks, bars, tools, angles, girders, pipes, gears, and technical items can all be made using steel long products. Steel is the collective name for a class of ferrous metals that are the most practical metallic materials that have ever existed due to its availability, durability, adaptability, and low cost. Plain carbon and mild steel is typically used in civil and allied work, and the majority of the carbon steels employed have tensile strengths of between 36 and 40 t/in2. The characteristics of steel are primarily governed by its carbon content. Due to its affordability in meeting general requirements, reasonably high strength, and other features like yield point, elongation, and reduction percentages, etc., a 0.40% carbon steel is of utmost importance. An integrated steel mill is substantially larger than a tiny steel plant, which is a facility used to produce steel. They often employ local labor and raw materials and are situated in rural areas. The building sector often uses the final goods. With equipment costing roughly $1 million of that total, it may be put up for as little as $2 million. In contrast to a large-scale operation, a tiny steel plant produces steel on a smaller scale. These factories are often built to produce a particular kind or assortment of steel items. Uses and Application The tiny steel plant is a flexible tool that may be applied to numerous tasks. Cutting rebar, angle iron, square tubing, pipe, and flat stock, as well as punching holes in steel plate, are some of its most popular uses. The tiny steel plant can also be used to cut custom forms out of sheet metal and shear plate and bar stock. This machine is a great investment for any fabrication firm thanks to its versatility. A tiny steel plant has a variety of applications. 1. Small steel goods like nails, screws, and other fasteners can be made using it. 2. It can be utilized to make bigger products for construction projects, like beams and columns. 3. Mini steel plants are frequently used to test new manufacturing techniques or prototype new designs. 4. Scrap metal can be processed using it to create brand-new, useful steel. 5. Custom metal goods can also be made with it and used in a range of sectors. 6. Mini steel plants are adaptable and can be customized to your company's unique requirements. There are several uses for these items, including: 1. Construction. 2. Manufacturing 3. Automotive A tiny steel plant can enable you to produce high-quality steel products and is an excellent way to break into the steel sector. Indian Market By 2025, the size of the world's steel market is anticipated to be $1.01 trillion, growing at a CAGR of 2.6%. Steel demand in prospective residential projects and industrial infrastructure is being driven by contractors' growing preference for affordable, durable, and environmental building materials. Steel products are utilized extensively in a variety of end-use industries, including construction, automotive, oil & gas, shipbuilding, and electrical & electronics, due to its high strength and long-lasting mechanical qualities. To meet application-specific requirements, a wide range of steel grades are produced utilizing two typical production techniques, namely the blast furnace-basic oxygen furnace (BF-BOF) and electric arc furnace (EAF). The excess caused by the expansion of production capacity by key players, antidumping tariffs, and escalating trade restrictions in a number of nations are the major challenges facing the worldwide market for steel goods. The trade conflict between the US and China is also anticipated to have an impact on market expansion throughout the forecast period. The global market for steel products is anticipated to rise as a result of the construction industry's recovery in developed and emerging nations alike. Currently, there is a transition taking place in the Indian steel sector. In the upcoming years, the country's demand for steel is anticipated to rise as a result of infrastructure improvement and expansion in the building and automotive industries. Industry Major Market Players: 1.Rashtriya Ispat Nigam Limited (RINL) 2.VISA Steel 3.Essar Steel 4.TATA Steel 5.JSW Steel 6.Bhushan Steel 7.MESCO Steel 8.FACOR Steel 9.Steel Authority of India Limited (SAIL) 10.Jindal Steel and Power
Plant capacity: Steel Billets:150 MT Per Day (Size 100mm x 100mm to 180mm x 180 mm Sections of Max. 6 meter length)TMT Steel Bars (Rebar):150 MT Per Day (Size DB 8 to 40 mm) Plant & machinery: 5445 Lakhs
Working capital: -T.C.I: Cost of Project:10417 Lakhs
Return: 28.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 266 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 266 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top