Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 16 of 191 | Total 1905 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 190 191   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Fatty Alcohol - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Fatty alcohol is a generic term for a range of aliphatic hydrocarbons containing a hydroxyl group, usually in the terminal or n-position.They are naturally derived from plant or animal oils and fats and used in the pharmaceutical, detergent or plastics industries. Fatty alcohols used in consumer products have a good human health profile and margins of exposure are most often in excess of 10 000. Fatty alcohols are not carcinogenic, mutagenic or reproductive/developmental toxins. Fatty alcohols (or long-chain alcohols) are high-molecular-weight, straight-chain primary alcohols, but can also range from as few as 4-6 carbons to as many as 22-26, derived from natural fats and oils. The precise chain length varies with the source. Some commercially important fatty alcohols are lauryl, stearyl, and oleyl alcohols. They are colourless oily liquids (for smaller carbon numbers) or waxy solids, although impure samples may appear yellow. Fatty alcohols usually have an even number of carbon atoms and a single alcohol group (-OH) attached to the terminal carbon. Some are unsaturated and some are branched. They are widely used in industry. Few Indian Major Players are as under • Galaxy Oleo-Chem (India) Ltd. • Godrej Industries Ltd. • Gujarat Soaps Ltd. • Hico Products Ltd. • India Glycols Ltd. • Procter & Gamble Hygiene & Health Care Ltd. • Rishab Alchem India Pvt. Ltd. • V V F Ltd.
Plant capacity: Fatty Alcohol: 83.3 Kgs/Day,Lauryl Alcohol (bye product):500 Kgs/Day,Myrystyl Alcohol (bye product):200 Kgs/Day,Palmityl Alcohol (bye product):100 Kgs/Day,Methyl Alcohol (bye product):100 Kgs/DayPlant & machinery: Rs 150 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 531 Lakhs
Return: 25.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Controlled Atmosphere Cold Storage - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout

Controlled atmosphere (CA) storage involves maintaining an atmospheric composition that is different from air composition (about 78% N2, 21% O2, and 0.03% CO2); generally, O2 below 8% and CO2 above 1% are used. Controlled atmosphere storage is a system for holding produce in an atmosphere that differs substantially from normal air in respect to CO2 and O2 levels. Controlled atmosphere storage refers to the constant monitoring and adjustment of the CO2 and O2 levels within gas tight stores or containers. The gas mixture will constantly change due to metabolic activity of the respiring fruits and vegetables in the store and leakage of gases through doors and walls. The gases are therefore measured periodically and adjusted to the predetermined level by the introduction of fresh air or nitrogen or passing the store atmosphere through a chemical to remove CO2. The use of controlled atmosphere storage has great potential to reduce the postharvest use of chemicals, maintain the nutritional quality of fruits and vegetables and reduce physical losses. This revised edition incorporates the latest research to provide a comprehensive and up-to-date overview of the range of conditions currently in use, their effect on flavour, quality and physiology, the influence of pests and diseases, environmental factors and packaging as well as a synthesis of recommendations for each fruit and vegetable. The Indian agricultural sector is witnessing a major shift from traditional farming to horticulture, meat and poultry and dairy products, all of which are perishables. The demand for fresh and processed fruits and vegetables is increasing as urban populations rise and consumption habits change. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Allana Cold Storage Ltd. • Anjaneya Cold Storage Ltd. • Asvini Fisheries Pvt. Ltd. • H M G Industries Ltd. • Hindusthan Ice & Cold Storage Co. Ltd. • Ideal Ice & Cold Storage Co. Ltd. • Indagro Foods Ltd. • Jindal Steel & Alloys Ltd. • Karnavati Cold Storage Ltd. • Karnimata Cold Storage Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • Mohan Meakin Ltd. • Nav Bharat Refrigeration & Inds. Ltd. • Prabhu Hira Ice & Cold Storage Ltd. • Ram'S Assorted Cold Storage Ltd. • Sri Vatsa Hotels Ltd. • Universal Cold Storage Pvt. Ltd. • Uptown Trading & Investments Ltd.
Plant capacity: Seasonal Commodity:11 MT/Day,Cold Storage (Rental):44 MT/DayPlant & machinery: Rs 365 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1022 Lakhs
Return: 19.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Saw (Spiral & Longitudinal) Pipes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

SAW pipe is Submerged Arc Welded pipe. They are the pipes formed by the process called Submerged Arc welding. There can be two types of SAW pipes: 1. LSAW-Longitudinal SAW and 2. HSAW- Helical SAW. (aka Spiral SAW). LSAW pipes are basically pipes formed by bending rectangular steel plates and are subsequently welded longitudinally (internally and externally) along the seam to form a pipe. HSAW pipes are pipes formed by conversion on Hot Rolled Coils and are subsequently welded internally and externally to form HSAW pipes. SAW process basically consists of an arc submerged in Flux used to weld the pipe. The flux is used to isolate the arc from the atmosphere. SAW pipes are manufactured by welding the edges of steel plates or by spiral welding of hot rolled coil (HR coil). The Saw Pipes manufactured from plates are called Longitudinal Submerged Arc Welded (LSAW) and are mainly used for transporting oil and gas (onshore/offshore). While, Helical Submerged Arc Welded (HSAW) pipes are made from HR coil,where the coil is welded spirally to give a shape of pipe and are mainly used for transporting oil and gas (onshore) and water transport. Apart from these, both the category of pipes can be used for structural applications also. Seamless pipes and tubes are used in both oil and non-oil sectors in a wide range of applications as line pipes, casing pipes, production tubings, drill pipes and the like. In the oil sector, API (American Petroleum Institute) standard pipes are preferred for line pipes and casing pipes. Oil sector absorbs nearly 60% of seamless pipes, while some 30% are consumed by bearings and boiler manufacturers. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Bengal Saws & Steel Products Pvt. Ltd. • Deccan Mechanical & Chemical Inds. Pvt. Ltd. • Jindal Saw Ltd. • Kohinoor Saw Mill Co. Ltd. • Lalit Pipes & Pipes Ltd. • Welspun Corp Ltd.
Plant capacity: SAW (Spiral & Longitudinal) Pipes: 166.7 MT/DayPlant & machinery: Rs 1942 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 3201 Lakhs
Return: 27.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

SAW (Spiral & Longitudinal) PIPES (Mobile Plant) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

SAW pipe is Submerged Arc Welded pipe. They are the pipes formed by the process called Submerged Arc welding. There can be two types of SAW pipes: 1. LSAW-Longitudinal SAW and 2. HSAW -Helical SAW. (aka Spiral SAW). LSAW pipes are basically pipes formed by bending rectangular steel plates and are subsequently welded longitudinally (internally and externally) along the seam to form a pipe. HSAW pipes are pipes formed by conversion on Hot Rolled Coils and are subsequently welded internally and externally to form HSAW pipes. SAW process basically consists of an arc submerged in Flux used to weld the pipe. The flux is used to isolate the arc from the atmosphere. Manufacturing facility for SAW pipes at the site by way of mobile plant. The mobile plant caters to customer requirement on location. There plants can be dismantled and re-erected within a short span. This unique feature helps in easy handling of pipes at site, meeting delivery schedules and cut down transportation cost thus making the project economical and viable.At site the mobile plant can produce pipes having diameter in excess of 18" up to 150" in various thicknesses, in single random length or double random length depending upon the project requirements. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bengal Saws & Steel Products Pvt. Ltd. • Deccan Mechanical & Chemical Inds. Pvt. Ltd. • Jindal Saw Ltd. • Kohinoor Saw Mill Co. Ltd. • Lalit Pipes & Pipes Ltd. • Welspun Corp Ltd
Plant capacity: SAW (Spiral & Longitudinal) Pipes: 83.3 MT/DayPlant & machinery: Rs 1387 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1802 Lakhs
Return: 11.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Plastic (HDPE, PVC, UPVC) Pipes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost & Revenue

Plastic (HDPE, PVC, UPVC and RCC) Pipes [NPCS/4771/22821, 22826] PVC pipes are made out of a material known as polyvinyl chloride, a durable, strong plastic-like substance. Pipes are constructed from this material and used in various applications from plumbing to construction. The pipe is designed to be universal. All pipes are designed around specific requirements to ensure that multiple pipe sections will fit together. The ends of the pipe can either be smooth or grooved (similar to a screw). Because PVC pipes are used in many housing and commercial construction applications, it is important that each pipe is tested to ensure quality. UPVC pipes offer the most hygienic means of fluid transportation. They are highly capable in fighting attacks by fungi and are not subject to contamination. The inside surface which is extremely smooth, does not support any growth, encrustation or fuming, and no odour or taste is transmitted to the fluid being conveyed. This property is of prime importance for the transportation of potable water to towns and villages. The PVC pipes are much lighter than cast iron or A.C pipes. Because of their light weight PVC pipes are easy to handle, transport, and install. Solvent cementing techniques for jointing PVC pipe lengths is cheaper, more efficient and far simpler. PVC pipes do not become pitted or tuberculated and are unaffected by fungi and bacteria and are resistant to a wide range of chemicals. They are immune to galvanic and electrolytic attack, a problem frequently encountered in metal pipes especially when buried in corrosive soils or near brackish waters. PVC pipes have elastic properties and their resistance to deformation resulting from earth movements is superior compared to conventional pipe materials especially asbestos. PVC pipes and fittings market in India has grown at a CAGR of 12.5% during the period from FY’2009-FY’2014. In the past few years, government of India has initiated many new projects and investments in the irrigation sector. The focus of the government is on rural water management, which will be fulfilled only when there will be proper infrastructure for the transportation of water to the end-user. This factor will remain as one of the major drivers for the growth of PVC pipe industry in the country along with the expansion of housing sector and increasing demand for oil and gas transportation. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Anant Extrusions Ltd. • Ashish Polyplast Ltd. • Captain Polyplast Ltd. • Dutron Plastics Ltd. • Dutron Polymers Ltd. • Fine Plast Polymers Ltd. • Finolex Industries Ltd. • Gwalior Polypipes Ltd. • Jain Irrigation Systems Ltd. • Jayshree Polytex Ltd. • Kimplas Piping Systems Ltd. (1996) • New Age Agritech Ltd. • Omega Pipes Pvt. Ltd. • Paragon Synthetics & Polymers Ltd. • Pioneer Polyfeb Ltd. • Profitcore Pipes Ltd. • Ram Telcom Ltd. • Raunaq Plastics Ltd. • Rekan Industries Ltd. • Samana Plastic Ltd. • Sanco Industries Ltd. • Sudhakar Plastic Pvt. Ltd. • Sudhakar Polymers Ltd. • Surya Polyvin Ltd. • Texmo Pipes & Products Ltd. • Tulsi Extrusions Ltd.
Plant capacity: HDPE Pipes:83.3 MT/Day, PVC Pipes: 83.3 MT/DayPlant & machinery: Rs 938 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 2124 Lakhs
Return: 30.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Precipitated Silica from Rice Husk Ash - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Rice husk is an agricultural residue easily available in rice producing countries. India is a major rice producing country, and the husk generated during milling is mostly used as a fuel in the boilers for processing paddy, producing energy through direct combustion & or by gasification. The rice husk contains about 75% organic volatile matter & the balance 25% of the weight of this husk is converted into ash during the firing process, is known as rice husk ash (RHA). This RHA in turn contains around 85%–92% amorphous silica. Silica is one of the valuable inorganic chemical compounds. It can exist in gel, crystalline and amorphous forms. It is the most abundant material in the earth’s crust. Silica is the major constituent of rice husk ash. With such a large ash content & silica content in the ash it becomes economical to extract silica from the ash, which has wide market & also takes care of ash disposal. Precipitated Silica (also called particulate silica) is composed of aggregates of ultimate particles of colloidal size that have not become linked in massive gel network during the preparation process. Precipitated Silica soluble silicate solutions are of fine controlled particle size & porous in nature. Precipitated silica powders have a more open structure with higher volume than dried pulverized gels. Precipitated silica is used as filler for paper & rubber as a carrier & diluents for agricultural chemicals, as an anti caking agent, to control viscosity & thickness and as a cleansing agent in toothpastes & in cosmetics. Precipitated silica also finds its applications as anti caking agents in food industry & as thermal insulators. Precipitated silica is perhaps the best not black filler and reinforcing agent used in rubber industry especially for the production of silicon rubber. Precipitated silica market is fragmented and major portion of the global market share is constituted by regional players. Therefore, precipitated silica market has high price sensitivity. Moreover low capital investment has increased the threat of new entrants in the market mainly in the developing economies. There has been surge in investment by major players in the emerging economies. Thus, Precipitated Silica from Rice Husk Ash as an entrepreneur, offers an exciting opportunity to you.
Plant capacity: Precipitated Silica: 5 MT/Day,CaCO3 (by product):10.3 MT/DayPlant & machinery: Rs 437 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 660 Lakhs
Return: 24.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

TMT Bar - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Steel is a generic name for a group of ferrous metals which due to their abundance durability versatility and low cost are most useful metallic material known to mankind. TMT Bars are re rolled bars from Ingots/Billets. TMT Bars can be described as new-generation high strength steel having superior properties such as weldability, strength, ductility and tensile strength, which meet the highest international quality standards. Thermo Mechanical Treatment (TMT) process for reinforcement bars is opening up new vistas in composite RCC, the re-enforcing steel is the costliest constituent (30 To 40% Per Cu. M. of concrete). TMT Bars have excellent ductility and higher fatigue strength, which make them suitable for structures and foundations that are subject to dynamic and seismic loading. They also possess excellent weldability because carbon is restricted below 25% and are resistant to fire hazards with no loss of strength up to 300 degrees Celsius. Better bendability also makes them easily workable at site and they are used in a wide range of applications. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • A S R Multimetals Pvt. Ltd. • Aadhunik Steels Ltd. • Anil Special Steel Inds. Ltd. • Ankit Metal & Power Ltd. • Apple Sponge & Power Ltd. • B M W Industries Ltd. • Chamundi Steel Castings (India) Ltd. • Concast Bengal Inds. Ltd. • Crystal Cable Inds. Ltd. • D S C Ltd. • Faridabad Investment Co. Ltd. • Hans Ispat Ltd. • Hira Ferro Alloys Ltd. • Jai Hind Wire Rod Mills Ltd. • Jai Raj Ispat Ltd. • Kohinoor Steel Pvt. Ltd. • M S P Steel & Power Ltd. • Mauria Udyog Ltd. • Mohan Steels Ltd. • P L G Power Ltd. • R K K R Steels Ltd. • Rathi Steel & Power Ltd. • S K M Steels Ltd. • S M C Power Generation Ltd. • S P S Steels Rolling Mills Ltd. • Sandur Manganese & Iron Ores Ltd. • Sujana Metal Products Ltd. • Tata Steel Processing & Distribution Ltd. • Vikash Metal & Power Ltd. • Viksit Engineering Ltd. • Vinayaga Infra (India) Ltd. • Vinayak Steels Ltd. • Welspun Steel Ltd. • Welspun Tradings Ltd.
Plant capacity: TMT Bar: 125 MT/Day • Scraps: 6MT/DayPlant & machinery: Rs 730 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1675 Lakhs
Return: 28.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Clinker Grinding for Cement - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Cement is an inorganic, non-metallic substance with hydraulic binding properties, and is used as a bonding agent in building materials. It is a fine powder, usually gray in color that consists of a mixture of the hydraulic cement minerals to which one or more forms of calcium sulfate have been added. Mixed with water it forms a paste, which hardens due to formation of cement mineral hydrates. Cement is the binding agent in concrete, which is a combination of cement, mineral aggregates and water. Concrete is a key building material for a variety of applications. In the manufacture of Portland cement, clinker is lumps or nodules, usually 3-25 mm in diameter, produced by sintering limestone and alumino-silicate during the cement kiln stage. Clinker is the main ingredient in cement. These hardened granules are obtained by firing a mixture of approximately 80% limestone and 20% clay to a high temperature. The most commonly used cement in the world is Portland cement, which is formed at high temperatures that chemically combine the ingredients into new components, including calcium silicates and calcium aluminates. When the cement clinkers are ground with approximately 5% gypsum, they form Portland cement. These compounds allow cement to set when combined with water and to form strong bonds that can withstand pressure, water immersion, and other elements. Cement Clinker is an intermediate product used in manufacture of Portland and Blended Cements in Cement. Portland cement clinker is ground (usually with the addition of a little gypsum, that is, calcium sulfate dehydrate) to a fine powder and used as the binder in many cement products. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • A C C Ltd. • Almora Magnesite Ltd. • Ambuja Cement Eastern Ltd. • Ambuja Cement Rajasthan Ltd. • Ambuja Cements Ltd. • Anjani Portland Cement Ltd. • Barak Valley Cements Ltd. • Bheema Cements Ltd. • Bhilai Jaypee Cement Ltd. • Birla Corporation Ltd. • Cement Manufacturing Co. Ltd. • Century Textiles & Inds. Ltd. • Chettinad Cement Corpn. Ltd. • Dalmia Cement (Bharat) Ltd. • Dhar Cement Ltd. • Gangotri Cement Ltd. • Greygold Cements Ltd. • Gujarat High Tech Inds. Ltd. • Gujarat Sidhee Cement Ltd. • Hemadri Cements Ltd. • K C P Ltd. • Keerthi Industries Ltd. • Khalari Cements Ltd. • Lafarge India Pvt. Ltd. • Malabar Cements Ltd. • Mangalam Cement Ltd. • Meghalaya Cement Ltd. • My Home Inds. Ltd. • N C L Industries Ltd. • Namo Cements Ltd. • Narmada Cement Co. Ltd. • C L India Ltd. • Orient Cement Ltd. • P R Cements Ltd. • Ramco Cements Ltd. • Ramco Industries Ltd. • Rashmi Cement Ltd. • Rishi Cement Co. Ltd. • Sanghi Industries Ltd. • Saurashtra Cement Ltd. • Shaktiman Cements Ltd. • Shiva Cement Ltd. • Shree Cement Ltd. • Shree Digvijay Cement Co. Ltd. • Shri Hariganga Cement Ltd. • Snhehadhara Industries Ltd. • Sparta Cements & Infra Ltd. • Sri Vishnu Cement Ltd. • Srichakra Cements Ltd. • Tata Chemicals Ltd. • Trinetra Cement Ltd. • Ultratech Cement Ltd. • Vinay Cements Ltd. • Virgo Cements Ltd. • Visaka Cement Industry Ltd. • Zuari Cement Ltd.
Plant capacity: Clinker for Cement: 100 MT/DayPlant & machinery: Rs 436 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 907 Lakhs
Return: 23.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

SORBIC ACID - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Sorbic acid is a natural, organic preservative frequently used to maintain the freshness of a variety of human foods, drugs, and cosmetic products. Potassium sorbate and sorbic acid possess antifungal, and to a lesser extent antibacterial, properties. Sorbic acid also inhibits mold growth. Some of the important species that are suppressed by sorbic acid belong to the genera Alternaria, Botrytis, Cladosporiwn, Fusariwn, Mucor, Penicilliwn, Rhizopus, Trichoderma. Mold can be a problem in wine cellars. To control mold in the wine cellar, sorbic acid could be included in the antimicrobial compounds used for sanitizing. APPLICATIONS AND USES OF SORBIC ACID Here are a few specific applications with a few details: Dairy Products - The most common methods of application include dipping or spraying with potassium sorbate solutions for natural cheeses and direct addition for processed cheeses. For cottage cheese sorbic acid is added to the cream dressing before pasteurisation. Sorbic Acid in Beverage- Sorbic Acid is widely used as preservative in beverage. As preservative: in carbonated drinks, fruit drinks, dairy drinks to inhibit microbial. Sorbic Acid in Wines - Sorbic acid is used in table wines to prevent secondary fermentation of residual sugar. The addition of sorbic acid affords protection against recontamination by yeasts that have been heated or filter sterilized, but at these low levels it does not provide adequate protection against undesirable malolactic and acetic acid bacteria. ? Sorbic Acid in Pharmaceutical- Sorbic Acid is widely used apreservative in Pharmaceutical. As preservative: in intravenous injected liquid and nutrient solution to inhibit microbial. ? Sorbic Acid in Meat and Poultry - For fresh poultry, a dip in potassium sorbate significantly reduces the total number of viable bacteria and doubles the refrigerated shelf life. Country-cured hams sprayed with sorbate solution result in no mold growth for 30 days. ? Sorbic Acid in Fruit and Vegetable Products - Sorbates are applied as a fungistat for prunes, pickles, relishes, maraschino cherries, olives and figs. The same levels extend the shelf life of prepared salads ,eg, potato salad, coleslaw, tuna salad, etc. In the fermented vegetables, it is used to retard yeasts during fermentation. ? Sorbic Acid in Bakery Products - Sorbates are used in and/or on yeast-raised and chemically leavened bakery products. The use of sorbates in yeast raised products at one fourth the level that is normally added provides the same shelf life without adversely affecting the yeast fermentation. Sorbates added at one tenth the propionate level reduces the mix time by 30%. This internal treatment is used in combination to an external spray of potassium sorbate to increase the shelf life of bakery products. ? Sorbic Acid in Cosmetics- Sorbic Acid is widely used as preservative in Cosmetics. As preservative: in cosmetic and personal care product to inhibit microbial. SPECIFICATION: Description Unit Value Sorbic acid assay % 99.0 to 101.0 Water % <0.5 Heavy metal( as Pb) ppm <10 Melting range Deg>C 132-135 Residue on ignition % <0.2 Arsenic (as As) Ppm <3 DEMAND DRIVER The low toxicity of sorbic acid enhances its desirability as food preservative. The oral LD50 for sorbic acid in rats is lOg/kg compared to 5 g/kg for NaCI. The activity of the sorbates at a higher pH is one distinct advantage over the two other most commonly used food preservatives, i.e benzoic and propionic acids. Sorbates are classified as GRAS in the United States, with no upper limit set for foods that are not covered by Standards of Identity. Sorbates can be applied to food by any of several methods including direct addition, dipping in or spraying with an aqueous sorbate solution, dusting with sorbate powder, or impregnating food packing materials. The potassium salt is used in applications where high water solubility is desired. The continuous increase in food production has significantly increased the demand for food preservatives such as sorbic acid.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: 1.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Bare Conductors - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A wire or combination or wires not insulated from one another, suitable for carrying a single electric current is called conductor. The term conductor is not to include a combination of conductors insulated from one another, which would be suitable for carrying several different electric currents. Aluminium is a metal characterized by high resistance to corrosion, good electrical and thermal conductivity, and a density which is about one-third or less that of steel, copper, or nickel. Aluminium can be used as a power conductor, or for wire and cable shielding. Aluminium provides a lower weight to current-carrying ratio compared to copper. Aluminium has a lower tensile strength than copper, but approaches that of copper for the equivalent ampacity. When terminated with appropriate plating, hardware and processes as stipulated by the governing standards, Aluminium bussing, wiring and terminations prove to be as reliable as copper. Finally, the choice of Aluminium conductors can provide a significant cost savings. Aluminium and aluminium alloy conductors are the preferred and dominant conductors in several areas of power distribution. The major areas dominated by aluminium and aluminium alloy conductors are non-insulated overhead power transmission, insulated overhead power transmission and non overhead power distribution. Aluminium and aluminium alloy conductors offer good conductivity, light weight, excellent resistance to corrosion, good bending properties, greater tensile strength than copper and excellent compatibility with most common insulation used by the wire and cable industry. During 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Apar Industries Ltd. • Bagade India Engg. Ltd. • Bindawala Cables & Conductors Ltd. • Deepak Cables (India) Ltd. • E M C Ltd. • Eri-Tech Ltd. • Galada Power & Telecommunication Ltd. • Hirakud Industrial Works Ltd. • Jaipur Metals & Electricals Ltd. • Lunkad Aluminium Ltd. • Maharashtra Metal Powders Ltd. • Murarka Cables & Conductors Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Shashi Cables Ltd. • Smita Conductors Pvt. Ltd. • Traco Cable Co. Ltd. • Vidarbha Winding Wires Ltd.
Plant capacity: • All Aluminium Alloy Conductor: 10 MT/Day, Aluminium Conductor Steel Reinforced : 10 MT/DayPlant & machinery: Rs 580 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1141 Lakhs
Return: 27.36%Break even: 56.24%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 16 of 191 | Total 1905 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 190 191   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top