Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 14 of 202 | Total 2013 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 201 202   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Freeze Dried Vegetables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Most foods contain very high percentage of water. Microorganisms thrive when there is water, spoiling the food and altering its taste. Removing water keeps food from spoiling for long periods of time. Also removing water makes the food lighter, making it easy to package and transport. Yet, removing water, must not alter the composition of the food. Its basic structure and composition of its nutrients must remain intact. Freeze-drying, technically known as Lyophilization, is a process of sublimation where water molecules in a solid phase are directly converted to vapor phase. Since Lyophilization is the most complex and expensive form of dehydration, its use is usually restricted to delicate and heat-sensitive high value materials. Freeze drying is one such method. The scientific principle in freeze-drying is sublimation, the conversion of a solid (ice) directly into its gaseous form (water vapour). A typical freeze-drying machine consists of three major components - a freeze-drying chamber, a freezing coil connected to a refrigerator compressor, and a vacuum pump. Since the water and oxygen have been removed from freeze-dried food it does not require refrigeration when stores and is; therefore, considered to be "shelf-stable" or safe to store at room temperature for long periods of time. Freeze-dried foods are very moisture sensitive; therefore, they will rehydrate in a matter of minutes when added to warm/hot water. Many freeze-dried items can be reconstituted with cold water as well, but may take longer achieve their full moisture level. Unlike dehydrated food, most freeze-dried fruits, vegetables and meat and be eaten raw (without adding any water) and usually have the crispy texture of a chip. Increased consumer incomes and year-round demand for fresh produce force retailers or their representatives to establish buying points both in different growing areas of the United States and in foreign countries. Some retailers contract year-round with fresh fruit and vegetable packers, who may in turn contract with growers. Contracts and large-volume buying practices enable packers to obtain sufficient quantities of individual products. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • A S R Agro Ltd. • Agro Dutch Inds. Ltd. • Classic Mushrooms Ltd. • Coduras Exports Ltd. • Flex Foods Ltd. • Gujarat Dehyd Foods Ltd. • Himalya International Ltd. • Indo Britain Agro Farms Ltd. • K I C M (Madras) Ltd. • Naturite Agro Products Ltd. • Naturo Pest Ltd. • Sahas Agro Ltd. • Saraf Foods Ltd. • South Asian Mushrooms Ltd. • Sugam Agro-Tech Ltd. • Tarai Foods Ltd. • Tirupati Vegpro (India) Ltd. • Trans Techno Foods Ltd. • Umacon Agro Ltd. • Vishal Agritech India Ltd.
Plant capacity: Freeze Dried Vegetables: 2MT/DayPlant & machinery: Rs 242 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 743 Lakhs
Return: 25.00%Break even: 66.00%
Add to Inquiry Add to Inquiry Basket

Grain & Potato Based Vodka Distillery - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Vodka is a neutral spirit that is without distinctive character, aroma, taste, or color. These properties are developed during the distillation process or by treating crudely distilled spirits with activated carbon or other materials. Finely distilled vodka may also be further purified and refined by treatment with activated carbon and other materials. Vodka is usually not aged and can be made from grains, potatoes, sugars, fruits, and just about anything else that can be fermented to produce alcohol. This makes vodka an economical spirit that can be made easily in a short amount of time from readily available materials. It is made by fermenting and then distilling the simple sugars from a mash of pale grain or vegetal matter. Vodka is produced from grain, potatoes, molasses, beets, and a variety of other plants. Rye and wheat are the classic grains for Vodka, with most of the best Russian Vodkas being made from wheat. Alcohol has a depresent effect on the central nervous system and not a stimulating effect as was formerly supposed. A strong does of alcohol introduced into the stomach increases heart beat and causes rise in blood pressure. Hence, the use of brandy as a rostorative. Alcohol possesses excellent solvent properties and it is used for the extraction of several drugs and for the manufacture of tinctures and other medicinal preparation. It is also employed for the extraction of essential oil; and for the preparation of perfumes; essences and flavours. Vodka is produced in India by very few brands; hence this list includes mostly IMFL (Indian Made Foreign Liquor) and imported brands available in the market currently. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Allied Blenders & Distillers Pvt. Ltd. • Amber Distilleries Ltd. • Amrut Distilleries Ltd. • B D A Breweries & Distilleries Ltd. • B D A Pvt. Ltd. • Bacardi India Pvt. Ltd. • Balaji Distilleries Ltd. • Balbir Distilleries Ltd. • Baramati Grape Inds. Ltd. • Beam Global Spirits & Wine (India) Pvt. Ltd. • Central Distillery & Breweries Ltd. • Chhattisgarh Distilleries Ltd. • Empee Distilleries Ltd. • Hyderabad Distilleries & Wineries Ltd. • Interlink Exports Ltd. • Jagatjit Industries Ltd. • John Distilleries Pvt. Ltd. • Jubilant Industries Ltd. • Jubilee Beverages Ltd. • Kedia Distilleries Ltd. • Kerala Alcoholic Products Ltd. • Kerala Distilleries & Allied Products Ltd. • Kesarval Springs Distillers Pvt. Ltd. • Khemani Distilleries Pvt. Ltd. • Khoday India Ltd. • Mcdowell & Co. Ltd. • Mehra Beverages Ltd. • Mohan Breweries & Distilleries Ltd. • Mohan Rocky Springwater Breweries Ltd. • Narmada Distilleries Pvt. Ltd. • Nuway Organic Naturals India Ltd. • Pearl Distillery Ltd. • Pernod Ricard India Pvt. Ltd. • Piccadily Sugar & Allied Inds. Ltd. • Prag Distillery Pvt. Ltd. • Punjab Expo Breveries Pvt. Ltd. • Raj Breweries Ltd. • Ravikumar Distilleries Ltd. • S D F Industries Ltd. • Salamander Distillers Ltd. • Seagram Distilleries Pvt. Ltd. • Shaw Wallace & Co. Ltd. • Shaw Wallace Distilleries Ltd. (Maharashtra) • Shiva Distilleries Ltd. • Silver Oak (India) Ltd. • Southern Agrifurane Inds. Ltd. • Southern Agrifurane Inds. Pvt. Ltd. • Surya Organic Chemicals Pvt. Ltd. • Swarup Vegetable Products Inds. Ltd. • Tilaknagar Distilleries & Inds. Ltd. • Tilaknagar Industries Ltd. • Travancore Sugars & Chemicals Ltd. • Unitech Country Club Ltd. • Utkal Distilleries Ltd. • V R V Breweries & Bottling Inds. Ltd. • Vahni Distilleries Pvt. Ltd. • Vinayak Distilleries Ltd. • Vitari Distilleries Ltd. • Xylon Loquitur Distillers & Vintners Ltd.
Plant capacity: Vodka from Grain & Potato:30 KLs/DayPlant & machinery: Rs 3845 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 6316 Lakhs
Return: 25.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Edible Nuts Processing & Packing (Peanuts, Cashew Nuts, Almonds and Pistachio) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

Edible nuts are used by mankind for food, edible oils, spices, condiments or beverages. They have been an important food source from prehistoric times and are among the most nutritionally concentrated of human foods, high in protein, oil, energy, minerals vitamins. Nuts that are only rarely used as famine food have been excluded from this present study the paucity information normally considered edible. Nuts used solely for spices or condiments have also been largely excluded since they are used sparingly, to flavour food and not as a food; traditionally they are considered separately from edible nuts. Nuts that are largely used as commercial sources of edible oil. Peanuts can be eaten raw, used in recipes, made into oils, textile materials, and peanut butter, as well as many other uses. In general, peanut products are considered safe for human use. The pistachio a member of the cashew family. Groundnuts are widely cultivated as staple food in tropical and sub-tropical developing countries, providing a valuable source of proteins, fats, energy and minerals. Most of the world's groundnuts are produced and consumed in developing countries. Less than 6% of the world production is exported. The positioning of the largest net exporters has shifted considerably during the last six years. China, although it has become the largest producer. India has always been a major player in the production of cashew. It is the second largest producer of raw cashew in the world but conquers the 1st place among the largest producing countries of cashew kernels. Thus, due to demand it is a good project for entrepreneurs to invest. • Akshata Cashew Products Ltd. • Dolphin International Pvt. Ltd. • Karnataka Cashew Devp. Corpn. Ltd. • Kerala State Cashew Devp. Corpn. Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • M A C Agro Inds. Ltd. • Moolchand Exports Ltd. • North Eastern Regional Agri. Mktg. Corp. Ltd. • Pioneer Cashew Inds. Ltd. • S T C L Ltd. • Sriman Petrochemicals Ltd. • State Trading Corpn. Of India Ltd. • Tropical Foods Ltd.
Plant capacity: Pea Nuts:500 Kgs./Day • Cashew Nuts:500 Kgs./Day •Almonds:500 Kgs./Day •Pistachio:500 Kgs./DayPlant & machinery: Rs 26 Lakhs
Working capital: -T.C.I: Cost of Project:: Rs 222 Lakhs
Return: 28.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

AAC Blocks (Autoclaved Aerated Concrete Blocks) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Autoclaved Aerated Concrete (AAC) is a non-combustible, lime-based, cementitious building material that is expanding into new worldwide markets. As a single-component building material, AAC has achieved acceptance in new markets throughout the world. This is a light- weight building material produced by autoclaving a set mix of fine siliceous materials such as ground sand or fly ash and a binder like Portland cement or lime. Autoclaved Aerated Concrete (AAC) products are 4 times lighter in weight than ordinary concrete. Its characteristic structure comprising millions of tiny pores, it offers optimum solidity at low weight. As air has a low heat conductivity, aerated concrete provides for excellent thermal protection. It protects from cold and heat, allowing for single-shell constructions which provide more space, save time and reduce costs-aspects which are of considerable importance to property developers. Advantages of Autoclaved Aerated Concrete Blocks: High strength to weight ratio, Low thermal conductivity, Stability to variations in temperature and humidity, and resistance to fire. AAC products are equally suitable for residential construction, multistory buildings, commercial, and industrial construction. The products are made of natural materials: sand, lime, and water. These raw materials are processed to provide a building material with a large number of air pores. “The autoclaved aerated concrete sector of the construction industry is now in the phase of a tremendous growth cycle. The autoclaved aerated concrete industry must utilize competitive techniques as customers are looking for lowered costs. AAC is not a new building system but it is new to India. Autoclaved aerated concrete (“AAC”), though relatively unknown in India, is currently one of the many building products being touted as “green” or “environmentally friendly.” Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Ashoka Pre-Con Pvt. Ltd. • Baliapatam Tile Works Ltd. • Biltech Building Elements Ltd. • Entegra Ltd. • Gannon Dunkerley & Co. Ltd. • Keltech Energies Ltd. • Mohit Industries Ltd. • R D C Concrete (India) Pvt. Ltd. • Siporex India Pvt. Ltd.
Plant capacity: A.A.C. Blocks: 500 Cu.Mt /dayPlant & machinery: Rs 601 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1415 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Bicycle Tubes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Bicycle tubes are the backbone of the bicycle industries. Few numbers of companies in organized sector are engaged in the quality grade cycles tyres and tubes and few unorganized sector also engaged to manufacturing bicycle tyre and tubes. An inner tube is basically a doughnut-shaped balloon, with a valve for inflation. The only requirement for an inner tube is that it should not leak. Being rubber, they have no rigid structure. If an inner tube is inflated outside of a tire, it will expand to 2 or 3 times its nominal size, if it doesn't explode first. Without being surrounded by a tire, an inner tube can't withstand any significant air pressure. Most of the basic raw materials are indigenously available but there is short supply of natural rubber, it is required to import. Natural rubber is used in the carcass of passenger car cross-ply tyres for its building tack, ply adhesion, and good tear resistance. It is also used in the sidewalls of radial ply tyres for its fatigue resistance and low heat buildup. In tyres for commercial and industrial vehicles, natural rubber content increases with tyre size. Almost 100% natural rubber is used in the large truck and earthmover tyres which require low heat buildup and maximum cut resistance. Natural rubber is also used in industrial goods, such as hoses, conveyor belts, and rubberized fabrics; engineering products, for resilient load bearing and shock or vibration absorption components; and latex products such as gloves, and adhesives. Tubes of motorcycles and bicycle are used in the appropriate vehicle for riding the vehicle. Bicycles continue to be the principal mode of transport for the low and middle-income families. This is because of the bicycle is both environment and people friendly. India is the largest producer of bicycles next only to china. Today, the Indian bicycle manufacturing and bicycle parts industry is widely recognized for its quality standards in the international market. As bicycle continues to be the most popular mode of transport both in urban and rural areas, the demand for bicycle tubes is likely to increase day by day. Moreover, this is a labour intensive type of unit and can be located in rural areas solving rural unemployment problem. Small scale bicycle tube unit can also function as ancillaries to establish large scale manufacturers. As a whole it is a good project for entrepreneurs to invest. ? Few Indian Major Players are as under • Atlas Cycles (Haryana) Ltd. • Avon Cycles Ltd. • Cycle Corporation Of India Ltd. • Dewan Rubber Inds. Ltd. • Dewan Steels Ltd. • Eastman Industries Ltd. • Freedom Industries Ltd. • G R L International Ltd. • Hamilton Industries Pvt. Ltd. • Hero Cycles Ltd. • Majestic Auto Ltd. • Metro Tyres Ltd. • Milton Cycle Inds. Ltd. • Pavan Tyres Ltd. • Poddar Tyres Ltd. • Ralson (India) Ltd. • Rishabh Industries Ltd. • Roadmaster Industries Of India Ltd. • Roxy Exports Ltd.
Plant capacity: Bicycle Tubes: 10,000 Nos. /DayPlant & machinery: Rs 118 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 622 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Magnesium Sulphate (Fertiliser Grade) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Lime, magnesia, strontium, and baryts were found to have alkaline reactions and were called alkaline earths. The alkaline earth metal includes magnesium, calcium, strontium, and barium. All the alkali metals react with dilute acids like Sulfuric acid, Hydrochloric acid etc. to form their salts. Magnesium reacts with Sulfuric acid to form magnesium Sulphate. Magnesium Sulphate is commercially available as heptahydrate, monohydrate, anhydrous or dried form containing the equivalent of 2-3 waters of hydration. Magnesium Sulphate occurs naturally in seawater, mineral springs and in minerals such as kieserite and epsomite. Magnesium Sulphate heptahydrate is manufactured by dissolution of kieserite in water and subsequent crystallization of the heptahydrate. Magnesium Sulphate is available as brilliant colourless crystals, granular crystalline powder or white powder with a bitter salty cooling taste. Crystals effloresce in warm, dry air. It is freely soluble in water, very soluble in boiling water, and sparingly soluble in alcohol. Magnesite (40% MgO) is the raw material used for manufacturing magnesium sulphate. It can be used directly as a Mg fertiliser only in very acid soils for long-duration crops.
Plant capacity: Magnesium Sulphate (Fertiliser Grade): 60 MT/DayPlant & machinery: Rs 195 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 861 Lakhs
Return: 62.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Lubricants Blending Plant (Lubricants/Grease) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A lubricant is a substance introduced to reduce friction between moving surfaces. It may also have the function of transporting foreign particles. The property of reducing friction is known as lubricity. (Slipperiness). A good lubricant possesses the following characteristics: High boiling point , Low freezing point ,High viscosity index , Thermal stability , Corrosion prevention , High resistance to oxidation. Lubricants are typically used to separate moving parts in a system. This has the benefit of reducing friction and surface fatigue, together with reduced heat generation, operating noise and vibrations. Lubricants may contain additives known as friction modifiers that chemically bind to metal surfaces to reduce surface friction even when there is insufficient bulk lubricant present for hydrodynamic lubrication, e.g. protecting the valve train in a car engine at startup. On average, lubricating oils, which quantitatively account for about 90% of lubricant consumption, consist of about 93% base oils and 7% chemical additives and other components (between 0.5 and 40 %). A solid or semisolid lubricant consisting of a thickening agent (soap or other additives) in a fluid lubricant (usually petroleum lubricating oil) is called grease.Grease is a lubricant which has been thickened in order that it remains in contact with moving surfaces and not leak out under gravity or centrifugal action. Functions of lubricating grease:- Reduce Wear and Tear , Sealant to Contaminants , Prevent Corrosion, Prevent Rust , Heat Transmission , Resist. The production of simple lubricants normally involves blending processes but specialties often require the use of chemical processes such as saponification (in the case of greases), esterification (when manufacturing ester base oils or additives) or amidation (when manufacturing components for metalworking lubricants). Further manufacturing processes include drying, filtration, homogenizing, dispersion or distillation. Throughout the world, industrial applications account for most of the grease used for railroad, general manufacturing, steel production and mining predominate Among automotive applications, trucks and buses account for the majority of grease used, followed by agricultural/construction equipment and passenger cars. Thus, Lubricants Blending Plant as an entrepreneur, offers an exciting opportunity to you. Few Indian Major Players are as under • Alicid Organic Inds. Ltd. • Asia Refinery Ltd. • Bharat Petroleum Corpn. Ltd. • Bharat Shell Ltd. • Burmah Petro Products Ltd. • Caltex Lubricants India Ltd. • Canara Sales Corpn. Ltd. • Castrol India Ltd. • Chemoleums Ltd. • Continental Petroleums Ltd. • Gantley Speciality Products Ltd. • Gujarat Indo-Lube Ltd. • Gujarat Oiland Inds. Ltd. • Gujarat Speciality Lubes Ltd. • Gulf Carosserie India Ltd. • Gulf Oil Corpn. Ltd. • Gulf Oil India Limited • Gulf Oil India Ltd. • Houghton Hardcastle (I) Ltd. • Iccon Oil & Specialities Ltd. • Indian Additives Ltd. • Indian Oil Blending Ltd. • Lubrizol India Pvt. Ltd. • M P Petrochem Ltd. • Motorol (India) Ltd. • Motorol Speciality Oils Ltd. • Nandan Petrochem Ltd. • Panama Petrochem Ltd. • Paras Lubricants Ltd. • Petrosil Lubricants Ltd. • Powerlink Oil Refinery Ltd. • Renaissance Petrolube Ltd. • Sagar Petroleums Ltd. • Sah Petroleums Ltd. • Savita Oil Technologies Ltd. • Savita Polymers Ltd. • Shiva Petro-Synth Specialities Ltd. • Southern Refineries Ltd. • Speciality Petrolubes Ltd. • Sunstar Lubricants Ltd. • Tata B P Lubricants India Ltd. • Tide Water Oil Co. (India) Ltd. • Total Lubricants India Ltd. • Unique Oils India Ltd. • Universal Petrochemicals Ltd. • Valvoline Cummins Ltd. • Velloils Lubricants & Petrochem Ltd. • Waxpol Industries Ltd. • Witmans Petrochem Pvt. Ltd.
Plant capacity: Blended Lubricating Oil 4 KL/ Day •Greases:1 KL/DayPlant & machinery: Rs 174 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 465 Lakhs
Return: 25.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Transmission Tower & Tele Communication Tower with Galvanizing Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

A transmission tower (colloquially termed an electricity pylon in the United Kingdom and parts of Europe, an ironman in Australia, and a hydro tower in English Canada) is a tall structure, usually a steel lattice tower, used to support an overhead power line. They are used in high-voltage AC and DC systems, and come in a wide variety of shapes and sizes. Typical height ranges from 15 to 55 metres (49 to 180 ft), though the tallest are the 370 m (1,214 ft) towers of a 2700 metres long span of Zhoushan Island Overhead Powerline Tie. In addition to steel, other materials may be used, including concrete and wood. The products are covered by Well-designed and fabricated structures for state electricity boards for the purposes of electricity supply (i,e) a) power transmission Towers, TV and Radio Towers, Telecommunication Towers, b) Railway and Highway bridges etc. c. Industrial structures etc. Transmission towers constitute a major component of infrastructure for the power sector. These carry the load of power conductors. With the expansion of power generation, the length of transmission and distribution lines has also gone up. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Associated Transrail Structures Ltd. • Baroda Power Transmission Ltd. • Diamond Power Infrastructure Ltd. • Gammon India Ltd. • Hirakud Industrial Works Ltd. • Jyoti Structures Ltd. • K E C International Ltd. • Kalpataru Power Transmission Ltd. • Larsen & Toubro Ltd. • R P G Transmission Ltd. • Shrijee Heavy Projects Works Ltd. • Suzlon Towers & Structures Ltd. • Tata Projects Ltd. • Transpower Engineering Ltd. • Transrail Lighting Ltd. • Unitech Power Transmission Ltd.
Plant capacity: Transmission & Tele Communication Tower: 80 MT/ DayPlant & machinery: Rs 239 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1309 Lakhs
Return: 28.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Tractor Manufacturing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Tractor is one of the most important farm machineries. We can say that tractor is the forehand of the farming industry. This is the blessing of god as well as science to get largest amount crops in the limited farming land with limited time. It belongs to the automobile industry. The word "tractor" is related to words like "traction" and "tractive," from the Latin word "tractus" meaning drawing (pulling): a tractor is essentially a machine designed to pull things along, usually very slowly and surely. The agricultural tractor is one of the class of mobile machines that involves the ‘traction’ process. The word 'traction' and name 'tractor' come from the word to 'draw' or 'pull' so a tractor is basically a machine for pulling; other mobile machines such as locomotives are in the same class. Vehicles like road trucks and even motor cars, which are essentially vehicles for carrying loads, also involve the traction process. Tractors have long been an essential piece of equipment on the farm. They revolutionized the agricultural industry by adding a whole new level of efficiency. Further it has eliminated the laborious work to a greater extent. Now-a-days, tractors are also used in construction, landscaping and industrial settings. Let’s have an quick peep over it purpose in agricultural field as well as in non-farming field. Farming purpose: Plowing, feeding, planting, cultivating, spraying fertilizers and pesticides. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Action Construction Equipment Ltd. • Asian Tractors Ltd. • Brahma Steyr Tractors Ltd. • C A I Inds. Pvt. Ltd. • Claas India Pvt. Ltd. • Eicher International Ltd. • Escorts Tractors Ltd. • George Oakes Ltd. • Gujarat Agro Inds. Corpn. Ltd. • H M T Ltd. • Haryana Agro Inds. Corpn. Ltd. • International Tractors Ltd. • John Deere Equipment Pvt. Ltd. • Kirloskar Pneumatic Co. Ltd. • Mahindra & Mahindra Ltd. • New Holland Fiat (India) Pvt. Ltd. • New Holland Tractors (India) Pvt. Ltd. • Punjab Tractors Ltd. • Sri Gopal Automotive Ltd. • Sri Rama Vilas Service Ltd. • Tractors & Farm Equipment Ltd. • V S T Tillers Tractors Ltd. • Volvo India Pvt. Ltd. • Yamuna Syndicate Ltd.
Plant capacity: Tractors: 84 Nos./DayPlant & machinery: Rs 258 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1771 Lakhs
Return: 35.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Sanitary Napkins -Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Sanitary Napkin comes under Nonwoven fabrics which as a whole come under technical textile. A sanitary napkin or a sanitary towel is an absorbent item used by a woman while she is menstruating or in any other situation where it is necessary to absorb a flow of blood. It also serves to protect clothing and furnishings. The Sanitary napkin industry is closely connected with the mode of life, which is in turn directly correlated to housing. Accordingly this industry has always grown by keeping space with improvement in living and it is new indispensable for sanitary in modern housing • Sanitary Napkins are exclusively used by adult girls & Ladies around the world during for maintaining physical aid & to avoid wetting or staining of the clothes. • Mostly Sanitary Napkin is not reusable. • Its use is much popular amongst the educated class of adult girls & ladies. India’s sanitary napkin market has significant profit potential. The demand for such products is stable; purchases are recurring and not subject to normal business cycles. Historically, the price of feminine hygiene products have been relatively expensive, but that is changing as small and large businesses enter the market and make an accessible, lower-priced offering to a wider consumer base. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Carewell Hygiene Products Ltd. • Centron Industrial Alliance Ltd. • Dhanalaxmi Roto Spinners Ltd. • Diapers India Ltd. • Godrej Consumer Products Ltd. • Gufic Biosciences Ltd. • Johnson & Johnson Ltd. • Kimberly Clark Lever Pvt. Ltd. • Mediklin Healthcare Ltd. • Mirah Dekor Ltd. • Procter & Gamble Hygiene & Health Care Ltd. • Regency Diaper Inds. Ltd. • Syncom Healthcare Ltd. • Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: 30,000 Pkts./DayPlant & machinery: Rs 345 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 685 Lakhs
Return: 27.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 14 of 202 | Total 2013 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 201 202   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top