Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 176 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 176 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Moringa Oleifera (Drumstick) Powder

Moringa is a drought tolerant, medium-sized, evergreen tree that prefers warm, frost-free climates to flourish. Its tender leaves and twigs can be harvested at any time from a well-established, 1.5 to 2 meters tall plant. Taller plants bear cream-white, small size flowers in clusters throughout the season, which subsequently develop into long slender dark-green, three-sided, edible seedpods with tapering ends. Moringa is grown in home gardens in West Bengal and Odisha and as living fences in southern India and Thailand, where it is commonly sold in local markets. In the Philippines and Indonesia, it is commonly grown for its leaves which are used as food. Moringa is also actively cultivated by the World Vegetable Center in Taiwan, a center for vegetable research. In Haiti, it is grown as windbreaks and to help reduce soil erosion. The bark, sap, roots, leaves, seeds, oil and flowers of moringa are used in traditional medicine in several countries. The thickened root of the plant has been used as horseradish in the past. This practice is now discouraged, as the root contains alkaloids, which can prove fatal on ingestion. The leaves of the plant serve culinary purposes. They are used as the greens in salads and also as pickles for seasoning. The seeds of moringa are used to obtain oil, which can be used to cook a variety of dishes. Drumstick is one of the world’s most useful trees with potential to improve nutrition, boost food security, and foster rural development and support sustainable land care. From leaves and root to pods and seeds, all parts of the drumstick tree are highly edible. India exported moringa powder worth Rs 14.6 crore in 2015, compared to Rs 11.61 crore in 2014. The export of these was worth Rs 2.5 crore in January and February this year. The latest trend in the moringa market is the shift towards organic leaves and usage of solar driers. The export market has been increasing at the rate of over 30 per cent. Moringa powder have applications in neutraceutical, pharmaceutical and cosmetics industries. Today Moringa Market is estimated more than US$ 4 billion, which expected to cross US$ 7 billion by 2020 @ 9 percent per annum. Thus, due to demand it is best to invest in this project. Few Indian major players are as under: • A V P Marketing & Exports Ltd. • Arjuna Natural Extracts Ltd. • Ayurvedic Pharmaceutical Co. Ltd. • Ayurvedshri Herbals Ltd. • Chaitanya Pharmaceuticals Pvt. Ltd. • Flavex Aromats (India) Pvt. Ltd. • Ganga Pharmaceuticals Ltd. • Gayatri Herbals Pvt. Ltd. • Heal Ayurveda Pharmacy Ltd. • Hindustan Herbals Ltd. • Indian Medicines Pharmaceuticals Corp. Ltd. • Indus Biotech Pvt. Ltd. • Kerala Ayurveda Ltd. • Kerala Ayurveda Vaidyasala Ltd.
Plant capacity: 180,000 Kgs. per annumPlant & machinery: 61 Lakhs
Working capital: -T.C.I: Cost of Project:307 Lakhs
Return: 25.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Curcumin Extraction Unit

Curcumin is the main biologically active phytochemical compound of Turmeric. It is extracted, concentrated, standardized and researched. Curcumin, which gives the yellow color to turmeric, was first isolated almost two centuries ago, and its structure as diferuloylmethane was determined in 1910. Extensive research within the last half a century has proven that its renowned range of medicinal properties, once associated with Turmeric, is due to Curcumin. Curcumin is widely used to colour many foods. The Draft Codex General Standard for Food Additives provides an extensive list of such foods. Curcumin is listed for use in dairy products, fats, oils and fat emulsions, edible ices, fruit and vegetable products, confectionery, cereal products, bakery wares, meat and meat products, fish and fish products, eggs and eggs products, spices, soups, sauces and protein products, foodstuffs intended for particular nutritional uses, beverages, ready-to-eat savouries and composite foods. Use levels of curcumin are in the range from 5 to 500 mg/kg depending on the food category. Global curcumin market share is highly fragmented in nature due to the presence of several small and large scale manufacturers mainly concentrated in India. Cosmetic application expects the highest growth increasing at over 13% CAGR. Certain skin advantages owing to the presence of natural anti-oxidants in the products will drive curcumin based cosmetic products demand. India & China are the major supplier of Curcumin, The turnover of Curcumin could reach USD 94.32 million in 2022. Indian Curcumin market size accounted for over 81% of the overall Asia Paciffic revenue most of these as a food coloring agent.India contributes 80% of world production and roughly 60% of export. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under: • Arjuna Natural Extracts Ltd. • Concert Spices & Exports Ltd. • Enjayes Spices & Chemical Oils Ltd. • Naturite Agro Products Ltd. • Sanat Products Ltd. • Sunrise Foods Pvt. Ltd. • Synthite Industries Pvt. Ltd.
Plant capacity: Curcumin Powder:15,000 Kgs per annum Turmeric Oil:6,000 Kgs per annum Deoiled Turmeric: 276,000 Kgs per annumPlant & machinery: 177 Lakhs
Working capital: -T.C.I: Cost of Project:369 Lakhs
Return: 28.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Absorbent Surgical Cotton (Cotton Rolls)

Surgical cotton is also known as absorbent cotton” or “cotton wool”. Surgical/ Absorbent cotton is cleared de-oiled and bleached cotton packed in different sizes. Since Surgical/Absorbent cotton is a material which comes in direct contact with the human body, its quality is very important and should satisfy the required pharmaceutical parameters. Either virgin cotton or waste cotton can be used as raw material. Comber waste cotton is desirable in case of waste cotton. Surgical/Absorbent cotton is widely used in hospitals, clinics, health centers and pharmacies for medical purposes. It is also used in beauty salons, business organizations and households for various purposes. Surgical/Absorbent cotton is mainly used for sanitary purposes and surgical operations as well as for ordinary daily use. It is also usually needed by women during their menstruation period that reoccurs at least once a month. The demand of Surgical Absorbent Cotton is directly related with the increase in population and expansion of public health services. The demand for Surgical Absorbent Cotton increases with the increase in population and number of hospitals, dispensaries, nursing homes, health care centers etc. The demand for absorbent cotton is directly related with the development and expansion of health facilities in the country. The Federal and Regional Governments have given high attention for expansion of health facilities to increase the coverage. Hence, considering the population growth and the high attention given by the Federal and Regional Governments, the demand for absorbent cotton is assumed to grow by 10%, annually. The demand for absorbent cotton in India is estimated to be about 2 million bales (of 170 kg each) per year. On the other hand, the small scale industries that manufacture absorbent cotton find it difficult to source short staple cotton. For example, the industries in Maharashtra and Madhya Pradesh are sourcing short staple cotton at high price from Rajasthan or the Northeastern part of India. So there is an imminent need to create an interface and a common platform between Indian cotton farmers as well as absorbent cotton industry. Thus, due to demand it is best to invest in this project.? Few Indian major players are as under: • Brisk Surgicals Cotton Ltd. • Jindal Medicot Ltd. • Lavino Kapur Cottons Pvt. Ltd. • Mohini Health & Hygiene Ltd. • Phoenix Surgicare Pvt. Ltd. • Precot Meridian Ltd. • Vandana Surgi Pharma Pvt. Ltd.
Plant capacity: 450,000 Kgs. per annumPlant & machinery: 399 Lakhs
Working capital: -T.C.I: Cost of Project:636 Lakhs
Return: 26.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Soda Ash (Light & Dense)

Sodium carbonate (Na2CO3) also known as washing soda or soda ash, is a sodium salt of carbonic acid. Most commonly occurs as a crystalline heptahydrate, which readily effloresces to form a white powder, the monohydrate. Sodium carbonate is domestically well known as a water softener. It can be extracted from the ashes of many plants. It is synthetically produced in large quantities from salt and limestone in a process known as the Solvay process. It is an essential raw material used in the manufacturing of glass, detergents chemicals and other industrial products. As such, soda ash is one of the most widely used and important commodities in the United States, contributing substantially to the gross domestic product. Soda ash is used to make the most common type of glass, soda-lime silica glass, generally used in the flat glass (automotive and construction), glass container (food and drink) and many other glass industries. It is also used in the production of sodium bicarbonate (baking soda), which is an essential ingredient in the beverage, coatings, detergents, food, dialysis, and personal care markets. For many of applications, soda ash is interchangeable with caustic soda, while offering a cost advantage. The soda ash market is estimated to witness a CAGR of 6.1% between 2014 and 2019 in terms of value, and is anticipated to generate a global market value of $22,090 million by 2019. A key factor driving the growth of the market is the growing applications of glass market. One of the major drivers for the growth of the soda ash market in the growing use of glass in various industries. Glass is extensively used in industries such as construction, automobile, and consumer product packaging. In 2017, the glass industry is the major end-user of the global soda ash market, which accounted for a share of 51.5%. The types of glass that use soda ash are flat glass container glass and others such as fiberglass, technical glass, and specialty glass. Entrepreneurs who invest in this project will be successful.
Plant capacity: Soda Ash Light:300,000 MT per annum Soda Ash Dense:300,000 MT per annumPlant & machinery: 12804 Lakhs
Working capital: -T.C.I: Cost of Project:25704 Lakhs
Return: 28.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Surgical and Examination Latex Rubber Gloves

Medical gloves are medical safety accessories that ensure sanitary hospital conditions by limiting patients' exposure to infectious matter. They also serve to protect health professionals from disease through contact with bodily fluids. Medical gloves are disposable gloves used during medical examinations and procedures to help prevent cross-contamination between caregivers and patients. Medical gloves are made of different polymers including latex, nitrile rubber, polyvinyl chloride and neoprene; they come unpowdered, or powdered with cornstarch to lubricate the gloves, making them easier to put on the hands. An Examination gloves (patient examination) glove is a disposable device intended for medical purposes that is worn on the examiner’s hand or finger to prevent contamination between patient and examiner. They are ambidextrous Examination grade gloves, also sometimes referred to as medical gloves, were originally designed for non-surgical medical procedures, but are also used in a variety of other applications where users seek added peace of mind regarding the glove quality. Latex gloves are being used in medical industry, automobile industry and manufacturing industry including food processing. The major purpose of using these rubber gloves are to protect the hand and fingers from heat, abrasion, electric shocks, chemical attack, contamination through direct contact as in the case of medical examination gloves etc. Rubber gloves manufacturing process is not complex and the main raw material is rubber latex. Indian surgical glove market is growing at 15% while the demand for examination gloves has been rising by 20%per annum. The Global Rubber Gloves market is expected to grow at a CAGR of 8.5% between 2014 and 2022. The factors such as rising healthcare expenditure, increasing health threats and increasing hygiene awareness and healthcare regulations are driving the market growth. Foreign exchange risks, rising raw material costs and pricing competition are hampering the market growth. Demand for disposable gloves in healthcare applications in Spain is estimated to grow at a significant rate over the forecast period. The country has a comprehensive public health system that accounts for approximately 75-80% of the sector’s activity. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under: • Accent Industries Ltd. • Acknit Industries Ltd. • Asian Latex Ltd. • Casil Health Products Ltd. • Casil Health Products Ltd. • J K Ansell Pvt. Ltd. • London Rubber India Ltd. • Mega Meditex Ltd. • Sri Kannapiran Mills Ltd. • T T K Biomed Ltd.
Plant capacity: Surgical Latex Rubber Gloves (Wt. 16 gms each): 18,000,000 Pairs per annum Examination Latex Rubber Gloves (Wt. 4 gms each): 18,000,000 Pairs per annumPlant & machinery: 407 Lakhs
Working capital: -T.C.I: Cost of Project:1116 Lakhs
Return: 35.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

Biodegradable Disposable Plastic Cutlery

Biodegradable Disposable Plastic Cutlery. (Eco Friendly Compostable Spoons Cutlery) India is slowly becoming a country where people are turning health conscious. Thankfully, biodegradable cutlery has emerged as a better alternative to plastics across the globe and Indians have been early adopters of biodegradable products. These Cutlery is fully compostable and biodegradable in approximately 100 days in properly maintained compost facilities. These eco-friendly products are perfect for restaurants, cafeterias, business functions, trade shows, festivals and fairs, catering. Compostable or biodegradable bio-plastics, most commonly used for utensils, are marketed as a sustainable alternative to single-use plastic. More and more people are becoming environmentally conscious every day and are taking the necessary steps to protect the environment. Businesses that embrace the concept of being eco-friendly can realize a wide range of benefits from doing so. One of the business industries in which compostable products can be used the most is in the food industry. Both dine-in and takeout restaurants have the opportunity to incorporate eco-friendly products into their operations in the form of plates and cutlery. The Global Biodegradable Cutlery Market sales were 845 million pieces in 2016, and it will be 1274 million pieces in 2023; while the revenue of Biodegradable Cutlery Market was 30.5 million USD in 2016 and forecast to accomplish 38.9 million USD in 2023, with a CAGR of 5.5% by 2023. Increasing awareness regarding harmful effects associated with non-biodegradable plastic wastes is a key factor likely to drive the market in the forecast period. Disposable cutlery, unlike the traditional disposable cutlery made from steel, is single-use cutlery. It is also comparatively cheaper than steel cutlery. Additionally, due to its lightweight it can be carried easily and is most favourable for on-the-go food. The increasing use of plastic in our day-to-day life is creating a lot of plastic waste and regulatory authorities in various parts of the world are posing bans on the use of plastic. To overcome this challenge, foodservice packaging manufacturers use plant-based raw materials for manufacturing single-use packaging like disposable cutlery, plates, bowls, and trays. Expansion in bio-based foodservice manufacturing capabilities may benefit disposable cutlery manufacturers during the forecast period. Furthermore, in recent years several manufacturers are looking for positive opportunities in edible disposable cutlery made of wheat bran, rice, corn, and sorghum. Additionally, edible disposable cutlery reduces CO2 emissions by tons. As per product type, the global disposable cutlery market is segmented into fork, spoon, and knife. Rising demand for eco-friendly, safe, and sustainable cutlery owing to increasing number of restaurants, fast food joints, and cafeterias is fueling the demand for biodegradable plates and cups. Environment friendly cutleries are a feasible alternative that offers the convenience of disposable plates, cups, and spoon in picnics, parties, and other occasions. Moreover, they do not have any negative impact on the environment. The Biodegradable Cutlery Market is segmented based on raw materials, products, composition and end user. The biodegradable cutlery is mainly made from PLA resin, CPLA (modified PLA), and Starch Blends. In general, the plant starch biodegradable cutlery is made from 70% renewable resources and 30% fillers like polypropylene and talc. PLA is a bio-based plastic derived from renewable resources such as maize starch, tapioca roots, or sugar cane. 100% cutlery is made from recode bio-plastic, produced from a rapidly renewable starch sourced from non-GMO crops. Growth will be driven by the increased options and convenience of meals prepared or consumed away from home. Demand will also be supported by a shift toward the use of higher value products featuring durable plastic or compostable materials. The Biodegradable Cutlery Market is dominated by the key players like Biopak, Eco-Products, Inc, Trellis Earth, BioMass Packaging, World Centric, Bionatic GmbH, GreenGood, Better Earth, Nature House Green, BioGreenChoice, Green Home, Vegware, Biodegradable Food Service, Biogreenchoice, Green good, World Centric, Karat and Green Home. Tags #Biodegradable_Spoon, #Disposable_Plastic_Cutlery, Biodegradable, Compostable and Renewable Disposable Plastic, #100%_Compostable_Spoons, Biodegradable Spoons, Plastic Cutlery, Disposable Plastic Cutlery, Biodegradable Cutlery, #Biodegradable_Plastic_Cutlery, Biodegradable Disposable Plastic Cutlery, Biodegradable Disposable Cutlery Manufacture, Biodegradable Cutlery Manufacture, Disposable Biodegradable Plastic Cutlery, Eco Friendly and 100% Compostable Spoons, Eco Friendly Cornstarch 100 Biodegradable Disposable Plastic Cutlery, Biodegradable Disposable Eco-Friendly Cutlery, #Compostable_Cutlery, Disposable Eco-Friendly Plastic Cutlery, Disposable Cutlery, Eco Friendly Biodegradable Cutlery, Eco Friendly Compostable Spoons Cutlery, #100%_Compostable_Spoons, Compostable Biodegradable Spoons, Cutlery Utensils, How Compostable Utensils are Made, 100% Disposable & Eco Friendly Cutlery Items, Eco-Friendly Utensils, Disposable Utensils, Eco-Friendly Cutlery, Compostable & Biodegradable Cutlery, Environmentally Friendly Cutlery, #Compostable_Cutlery_Manufacturing, Environmentally Friendly Cutlery, #Detailed_Project_Report_on_Disposable_Biodegradable_Plastic_Cutlery, Project Report on Biodegradable Spoon, Pre-Investment Feasibility Study on Disposable Biodegradable Plastic Cutlery, Techno-Economic feasibility study on Compostable Cutlery Manufacturing, #Feasibility_report_on_Compostable_Cutlery_Manufacturing, Free Project Profile on Disposable Biodegradable Plastic Cutlery, Project profile on Compostable Biodegradable Spoons, Download free project profile on Biodegradable Spoon, Compostable Food Service Ware, Compostable Products, Disposable and Compostable Spoon, #Manufacturing_of_Biodegradable_Plastics_Cutlery
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Truck Body Building

A truck or lorry is a motor vehicle designed to transport cargo. Trucks vary greatly in size, power, and configuration; smaller varieties may be mechanically similar to some automobiles. Commercial trucks can be very large and powerful, and may be configured to mount specialized equipment, such as in the case of fire trucks and concrete mixers and suction excavators. Already at 1.31 billion, by 2027 India’s population will be the largest in the world, at over 1.4 billion. Growth means urbanisation, and urbanisation requires ‘stuff’. As small villages develop into large, and as people move from rural to urban locations, so demand for ‘stuff’ will increase. Great news for truck fleets, and the OEMs who supply those stuff-hauling fleets; but the changes to trucking in India over the next decade will be seismic in proportion. Just about the only certainty is that ‘Trucking India’ in 2027 will look very different from its 2017 ancestor. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Automobile Corpn. Of Goa Ltd. • Commercial Engineers & Body Builders Co. Ltd. • H M M Infra Ltd. • J C B L Ltd. • Tata Marcopolo Motors Ltd.
Plant capacity: Truck Body Building : 20 Nos./dayPlant & machinery: Rs 362 lakhs
Working capital: -T.C.I: Cost of Project : Rs 1709 lakhs
Return: 31.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Recovery of Fe2O3 & TiO2 from Bauxite Processing Waste

Bauxite waste (Red Mud) of Indian origin contains around 55% plus of Fe2O3 and is considered as a hazardous waste material for the alumina industry which is generated in the order of two tons of Red Mud per one tone of alumina produced from bauxite. The worldwide alumina production is around 58 million tonnes in which India counts for 2.7 million tonnes. India produces around 5.4 million tonnes of Red Mud per annum from its various alumina refineries. Titanium is a precious, light, corrosion resistant, bio-inert and strong element. Moreover, titanium dioxide is widely used in materials in our day-to-day life and its applications are quite vast, including in paints, catalysts, pigments and sunscreen. Despite the fact that the processing of titanium is quite expensive, it is more bene?cial to recover titanium compared with its high processing cost. One of the main focuses of the research community has been on extracting titanium from red mud. The global Ferric Oxide market is likely to touch valuation of US$1,951.8 mn by the 2025 end. The marketplace is likely to register significant growth owing to booming construction industry likely to boost demand for the ferric oxide market in the coming years. The demand for titanium dioxide in India stood at 57 KTPA in 2018 and is projected to grow at a CAGR of 9.19% during 2019-2030 to reach 165 KTPA by 2030. Increasing use of titanium dioxide in various end-use industries such as paints, pigments and textiles as dispersing agent, flocculent, and whitening agent is the key factor spurring the demand for titanium dioxide across the country. Few Indian major players are as under: • Bengal Chemicals & Pharmaceuticals Ltd. • Bharat Chemicals & Fertilizers Ltd. • Kerala Minerals & Metals Ltd. • Kolmak Chemicals Ltd. • Tata Pigments Ltd. • Travancore Titanium Products Ltd. • V V Titanium Pigments Pvt. Ltd.
Plant capacity: Ferric Oxide (Fe2O3): 27,000 MT per Annum Titanium Dioxide (TiO2): 9,000 MT per Annum Remains Materials: 200,000 MT per AnnumPlant & machinery: 408 Lakhs
Working capital: -T.C.I: Cost of Project: 1741 Lakhs
Return: 29.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Recovery of Fe2O3 & TiO2 from Bauxite Processing Waste

Ferric oxide (Fe? O?) is an inorganic compound also known as hematite. Ferric oxide is used in the iron industry in the manufacturing of alloys and steel. The Food and Drug Administration (FDA) has approved ferric oxide pigment for use in cosmetics. Moreover, ferric oxide granules are used in the form of filtration media for removing phosphates in saltwater aquariums. FOR Fe2O3 • In iron industries for producing steel and alloys • Ferric oxide powder, also called jeweler’s rouge, is used for polishing lenses and metallic jewelry • Its granular form is used as a filtration media for pulling out phosphates in saltwater aquariums • As FDA-approved Pigment Brown 6 and Pigment Red 101, for use in cosmetics. • In biomedical applications, because its nanoparticles are non-toxic and biocompatible Recovery of Fe2O3 Fe2O3 is another material in red mud that has attracted a number of researchers. Until now, there are three means to recover iron from red mud: smelting, solid-state reduction and magnetic separation. In smelting process, red mud is charged into blast furnace or rotary furnace with a reducing agent. Then, iron oxide in red mud is reduced to generate pig iron that can be used in steel production. However, smelting process has some demerits. High energy and capital costs are associated with blast furnace (BF) operation because scale of operation is high. Red mud must be mixed with some good-grade iron ore to maintain the minimum grade of the charge to BF. In addition, titanium reacts with other constituents of the slag to form multiple oxides that are difficult to leach. In the solid-state reduction process, the mud is mixed with a reducing agent or contacted with a reducing gas to produce metallic iron. The product can be an input either in a steel-making furnace or a conventional blast furnace. Compared to smelting process, solid-state reduction process consumes less energy. But, it also has some disadvantages. First, the metallic iron produced is quite difficult to separate from the rest of product. So, it is easily polluted by gangue materials. Second, the product is in a very fine form. The recovery rate of Fe2O3 was 45% (weight percent). Another means is to convert hematite or goethite in red mud to magnetite firstly, which is followed with magnetic separation. Obviously, this process is more complex than magnetic separation. Directly. But it also has some advantages. First, goethite is easier to separate magnetically and needs less energy to reduce compared to hematite. So, the extra cost of reducing hematite to magnetite can be compensated by the energy difference between reducing hematite and magnetite to metallic iron. Titanium Dioxide, also known as titanium (IV) oxide or titania, is a white crystalline powder, made up of ilmenite and rutile, which are used as the main raw materials. It is created using either the chloride process or sulfuric acid, referred to as the sulfate process. Titanium dioxide is extensively used as a white pigment in paints and coatings application. Also, it has a wide range of applications, ranging from paints and sunscreens to food coloring. FOR TiO2 Uses for white pigment Four million tons of pigmentary TiO2 are consumed annually. Apart from producing a white colour in liquids, paste or as coating on solids, TiO2 is also an effective opacifier, making substances more opaque. Here are some examples of the extensive range of applications: (1)Paints (2)Plastics (3) Papers (4) Inks (5) Medicines (5) Most toothpastes (6) Skimmed milk; adding TiO2 to skimmed milk makes it appear brighter, more opaque and more palatable Recovery of TiO2 Generally, there have been two main methods developed by which the titanium can be recovered from red mud: pyrometallurgical recovery and hydro-metallurgical recovery. The pyro- metallurgical method generally comprises the separation of pig iron. The red mud is calcined at a range of temperatures, from 800 to 1350°C, and is smelted through a reducing agent using an electric-furnace to obtain melted iron as well as slag that includes titanium dioxide, silica and alumina. The metallic iron is removed from the slag and the slag is digested to recover the titanium and aluminium from the solution. The pyro-metallurgical process is not an energy-friendly method and, hence, the hydrometallurgical technique usually attracts more attention from the research community. A number of the acids’ extractability have been analysed to recover titanium from red mud, such as dilute and concentrated H2SO4 and hydrochloric acid. The solvent extraction technique has been applied to extract titanium from red mud using HCl, which comprised di- and mono-. Red mud can also be considered a secondary source of the most important modification of titanium compound, titanium dioxide. Market Outlook The Global Ferric Oxide Market is expected to register a CAGR of 4.99% to reach a value of USD 2,414,382.9 Million by 2030. The growing construction industry output is expected to be one of the most significant drivers for the iron oxide market on a global scale. Iron oxide finds a profound rate of application in the construction industry such as in the colouring of various construction materials, including concrete blocks and bricks, ready-mixed concrete and roofing tiles. With the steady growth of the construction industry, stemming from increasing urban and civil infrastructure projects, the demand for iron oxides is expected to increase significantly. Additionally, the use of iron oxide for applications such as paints & coatings, plastics, ceramics and chemicals would necessitate its bulk consumption. The primary driver of the global ferric oxide market is its growing adoption in steel production. The increasing application of steel in the major end-use industries such as transportation, construction, energy, packaging, and consumer appliances is also a prime factor driving market growth. Steel finds application in the manufacturing of automobile structures, panels, doors, engine blocks, gears, suspension, wheels, fuel tanks, steering, and braking systems. The use of iron oxide pigments to impart colors to construction materials, paints, inks, plastics, papers, cosmetics, rubbers, concrete blocks, and tiles is another key driver of the market. The growing construction industry output is expected to be one of the most significant drivers for the iron oxide market on a global scale. The growing adoption of iron oxide nanoparticles in wastewater treatment is an excellent opportunity for the players in the market. With the steady growth of the construction industry, stemming from increasing urban and civil infrastructure projects, the demand for iron oxides is expected to increase significantly. Additionally, the use of iron oxide for applications such as paints & coatings, plastics, ceramics and chemicals would necessitate its bulk consumption. The ferric oxide market is witnessing consolidation, driven by the pursuit for sustainability among market participants, owing to the imposition of stringent regulations on the production of ferric oxide, which are increasing the overhead costs for ferric oxide manufacturers. This has prompted ferric oxide manufacturers to consolidate production and business operations through acquisition of external enterprises having a sufficient infrastructure and resources. Some of the major players operating in the Ferric Oxide market: • Cathay Industries • Huntsman • Lanxess • Bayferrox • Toda Kogyo • Quality Magnetite • Prochem • BariteWorld • Cathay Industries • Nano-Oxides • Pirox Titanium Dioxide The global titanium dioxide market size was valued at USD 15.76 billion in 2018 and is expected to witness a CAGR of 8.7% from 2019 to 2025. Thus, rising number of residential and non-residential construction projects is augmenting the demand for paints & coatings, thereby boosting overall market growth. In addition, high demand for anti-corrosive architectural coatings in the pigments has increased the demand for titanium dioxide. The rising use of titanium dioxide in ceramic industry is one of the key factors expected to trigger the market growth in the forthcoming years. It is used as popular ingredient in different products including paint, plastic, paper, pharmaceuticals, and other items. It also provides variegation and crystallization to the color and texture of ceramic glazes. It further prevents pollutants including nitrogen oxide, sulfur oxide, carbon monoxide from affecting ceramic products. The tightening of regulations globally over vehicular emissions and fuel efficiency concerns have compelled manufacturers to take measures in making vehicles lightweight. High availability of substitutes the rising prices of TiO2 and its negative effects on human are pushing end-user industries to use substitute products. This will hinder the growth of the titanium dioxide market during the forecast period. Titanium dioxide particles have wide application scope due to their high stability, photocatalytic properties, and anti-corrosive nature and are manufactured from anatase. They are used in consumer products, such as sunscreens, and as components for articulating implants for the hip and knee. In the near future, its usage in plastics is set to rise at a breakneck pace thereby providing a major fillip to the global titanium dioxide market. Titanium dioxide find application in bettering numerous characteristics of plastics such as color, opacity, and strength. And with the ever-surging demand for plastic on account of the burgeoning world trade, the global titanium dioxide market growth it expected to remain supported. Top Key Players of Titanium Dioxide (TiO2) Market: • KRONOS Worldwide Inc. • Lomon Billions • The Chemours Company • Tronox Holdings plc • Venator Materials PLC. Tags #Recovery_of_Fe2O3_from_Bauxite_Processing, #Iron_Oxide_Recovery, #Recovery_of_Ferric_Oxide, #Recovery_of_Ferric_oxide_from_Bauxite_Processing_Waste, Ferric Oxide, Manufacturing Applications for Iron (III) Oxide, Manufacture of ferric oxide, Production of Iron (II) Oxide (Fe2O3), Process for the Manufacture of Iron Oxide, Process for Producing Iron Oxide, Iron Oxide Formula, Ferric Oxide Production, How to Make Iron Oxide, Preparation of iron oxide, Titanium Dioxide (TiO2) Production and Manufacturing, #Titanium_Dioxide, Manufacture of Titanium Dioxide, #Titanium_Dioxide_(TiO2) Production, Manufacturing Process of Titanium Dioxide, Titanium Dioxide Properties, Titanium Dioxide Uses, Titanium Dioxide Process Flow Diagram, Titanium Dioxide Manufacture, How to Make Titanium Dioxide, Manufacturing Process of Titanium Dioxide, Production of Titanium Dioxide, Titanium Dioxide Production, #Recovery_of_Titanium_Dioxide, Process for Recovery of Titanium Dioxide, Recovering Titanium Dioxide (Tio2), Recovery of Titanium Dioxide from Bauxite Processing Waste, #Project_Report_on_Recovery_of_Ferric_oxide_from_Bauxite_Processing_Waste, Detailed Project Report on Recovery of Ferric oxide from Bauxite Processing Waste, Project Report on Recovery of Titanium Dioxide, Pre-Investment Feasibility Study on Recovery of Ferric oxide from Bauxite Processing Waste, Techno-Economic feasibility study on Recovery of Titanium Dioxide, #Feasibility_report_on_Recovery_of_Ferric_oxide_from_Bauxite_Processing_Waste, #Free_Project_Profile_on_Recovery_of_Ferric_oxide_from_Bauxite_Processing_Waste, Project profile on Recovery of Ferric oxide from Bauxite Processing Waste, Download free project profile on Recovery of Titanium Dioxide
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Herbal Extracts (Brahmi Extract, Ashwagandha Extract, Dry Ginger Root Powdered Extract)

Herbal extracts are substances which are obtained by crushing, distilling, comminuting, and juicing various herbs. The processes are designed to maximum the potency of a particular herb. Herbal extract is referred to the crude mixtures extracted from various parts of plants, which have diverse applications in various industries. The extraction of herbal compounds is generally carried out using ethanol or water. Herbal extracts have been identified to be highly consumed in the form of dietary supplements. Other major application sectors of herbal extracts include food, beverages, pharmaceutical, cosmetic & personal care, and others. Brahmi Extract Brahmi known as Bacopa Monnieri is an herb basically used in the Ayurveda treatment for Asthma and Epilepsy. Apart from the treatment of these diseases, Brahmi is also widely accepted to have magical curing power for many other diseases. It is considered to be an excellent brain tonic, improving cognitive functions including enhancing memory power and learning ability. Bacopa Monniera Herb & Extract is a classic brain and nervine tonic included in the "Brahmi" category of herbs, which are those that benefit both the mind and spirit and improve the intellect and consciousness. Bacopa Monniera assists in heightening mental acuity and supports the physiological processes involved in relaxation. Ashwagandha Extract Ashwagandha or Withania Somnifera is a widely used herb in Ayurvedic medicines. The berries, leaves and root of this short herb have versatile medicinal values. The extract, light in color and neutral in taste is derived from select, handpicked roots. According to Ayurveda, Ashwagandha is excellent for vitality as well as rejuvenation and is a general health booster. The purification of Ashwangandha roots and the extraction processes are carried out under expert supervision using traditional methods laid down in ancient Ayurveda texts. Ginger Root Powdered Extract Ginger or Zingiber Officinal is one of world’s best known spices, used throughout history for its all-round health benefits. The dried ginger extract contains mono- and sesquiterpenes. Ginger is one the most well-researched herbs in the world. An ingredient of the traditional Indian and Chinese pharmacopoeia, Ginger and powdered Ginger monographs have been approved for inclusion in the National Formulary by the US pharmacopoeia. German and European monographs on ginger are also available. The global herbal extracts market is predicted to exhibit a 7.52% CAGR from 2018 to 2023. Rise of health consciousness among the youth and other demographics are likely to spur market demand over the forecast period. High demand for functional foods and beverages which contain the required ingredients for preventing chronic diseases. Awareness of the health benefits of herbal extracts can positively impact market growth. Furthermore, demand for skin care products with the inclusion of natural ingredients can create growth opportunities for the herbal extracts market. Global herbal extracts market has been growing at a continuous pace because of its various health benefits and increasing awareness about side effects from using chemical based products. Even at the times of recession the demand of herbal products is not much affected as people desire to maintain their health when the treatments are costlier. The extraction process requires obtaining active ingredients, using cost effective and appropriate solvents to increase the yield and its quality. There are various extraction processes each varying in cost efficiency, limitations and time consumption. India herbal extracts market has recorded phenomenal growth over the years with rising awareness among the people about the health benefits of consuming herbal products. The use of herbal extracts in the pharmaceutical and nutraceutical industry in India and abroad contributed a dominant share of ~% in the overall sales of the players operating in the space during FY’2017. The growing demand of ayurveda medicines due to limited or no side effects has boosted the use of herbal extracts by the players operating in pharmaceutical industry in India. Dietary supplements which are used to provide health benefits also involve a major component of herbal extract to be consumed by the people. Indian consumers are more inclined towards natural and herbal cosmetic products, especially those used for hair and skin care. The rising demand for natural cosmetics has resulted in augmented use of herbal extracts in preparing beauty products. The market has majorly been driven by the exports of high quality herbal extracts which are demanded by the US, Canada, Ukraine, South Korea, Czech Republic, Israel, France, Taiwan, Nepal, and other nations. The inclination of foreign customers towards Indian products due to health benefits of various herbs has led to a boost in the revenues of the market.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 176 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 176 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top