Google Search

Search

Already a Member ?

Best Business Opportunities in Gujarat - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

Gas & Petroleum: Project Opportunities in Gujarat

 

PROFILE:

The Oil Industry is a very important industry in the world and a lot depends on the price of the oil and it has been observed that whenever the oil prices increase the price of various products also increases. Oil and gas sector is one of the key catalysts in fuelling the growth of Indian economy. With a 1.2 billion population and an economy that has consistently at approximately 8 per cent annually, India's energy needs are increasing fast, warranting a robust demand for oil and natural gas in the country. India has emerged as the 5th largest refining country in the world, accounting for 4 per cent of the world's refining capacity. India exported 50 million tonnes (MT) of refined petroleum products during 2010-11. With our refining capacity increasing further, this figure is likely to touch about 70 MT by 2014, making India one of the world major exporters of petroleum products.

RESOURCES:

Gujarat State is rich in the hydrocarbon resources and is the largest on land producer of oil and gas in country. Gujarat contributes about 18% of country’s total crude oil production. Similarly it contributes about 11% of country’s total gas production. If we compare on land crude production then it is almost 50% of crude and 40% of natural gas from the Gujarat State. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. GSPC was incorporated in 1979 as a petrochemical company. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India. The largest gas grid will generate opportunities for transmission and distribution of natural gas to domestic and industrial users. Three LNG terminals coming up in the state will provide the fuel for growth. Refineries and petrochemical complexes in operation, invites investment in downstream projects.

 

GOVERNMENT POLICIES:

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.   In order to increase the exploration and thereby enhance the production of oil and gas in the country the Government of India liberalized the hydrocarbon sector. With the announcement of the liberalization policy in the hydrocarbon sector by Govt. of India for the oil and gas. Pursuant to the signing of PSC many private Exploration and producing Companies started the petroleum operations in the State and thereby the activities in the hydrocarbon sector have increased. In order to cope up with the increasing activities Government of Gujarat created the Office of Directorate of Petroleum to monitor various activities of exploration and exploitation of oil and gas, their production and royalty paid thereon by various organizations in the State of Gujarat. Gujarat State Petroleum Corporation Ltd (GSPC) is an oil and gas exploration company in Gujarat, India. It is India's only State Government-owned Oil and Gas Company with the Government of Gujarat holding approximately 95% equity stake. Today GSPC has become a vertically integrated energy company, excelling in a wide gamut of hydrocarbon activities across India.

 

 

 

 

                     

MINING & MINERALS:Project Opportunities in Gujarat

 

 

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

RESOURCES:

Gujarat is the ideal state for the investment in mineral based industries looking to the state mineral resources and infrastructural facilities. There is ample opportunity to establish mineral oriented industries like Limestone based cement and soda ash industry, Lignite based power plants, Bauxite-based Alumina plant, Marble & Granite based cutting, polishing plants, Clay based ceramic units, Silica sand based glass units. GNMRL is well placed to take benefit of imminent boom staring at the energy spectrum. GNMRL is unique in itself which focus in coal mining, met coke productions as well as Oil and Gas exploration, the three prime resources which are in great demand. Total area of the State of Gujarat is 1,96,024 sq.kms. Out of which 1,27,000 sq. kms is rocky, which is mineral probable area. About 57,970 sq. kms of these rocky areas have been covered under the Remote Sensing Survey / Pre-detailed Mineral Survey, and about 23,596 sq. kms, under the Detailed Mineral Survey. Till now total 3,63,534 meters of drilling has been completed for various minerals at different places in the state. Out of this, 3,13,613 meters of drilling was conducted by the department, and the remaining 49,921 meters of drilling, by expeditious drilling programme by hiring men & machines. Remaining uncovered area of 69,030 sq. kms will be covered in the next five years by remote sensing / pre-detailed mineral surveys. Total 12,030 sq. kms will be explored by the department, and 57,000 sq. kms, through outsourcing/ private participation.

 

GOVERNMENT POLICIES:

 

The Government of Gujarat has envisaged specific policy initiatives for industrial minerals occurring in the state to attract investment in the fields mineral exploration, exploitation, and mineral-based industries. It is intended to create competitive environment to speed up industrial development in mineral potential area by enhancement of Human Resource capabilities, improvement in infrastructure & adopting modern technology. The approach is to make progress by increasing mineral production and export of value added material through local and global competitiveness. Efforts to develop with special attention to minerals which are only available in the Gujarat as compared to other states in the country and mineral occurring in few states & having high quality. Local employment is created through mineral exploitation while maintaining mine safety & striking ecological equilibrium is also an additional addendum of this policy. To regulate the minor minerals, State Government has framed Gujarat Minor Mineral Rules-1966 under the Section-15 of Mines and Minerals (Regulation and Development) Act- 1957 and Central Government has framed Granite Conservation and Development Rules-1999 and Marble Development and Conservation Rules-2000. In addition, mines are being regulated under other Acts and Rules of Central Government such as Mines Act-1952, Mines Rules-1955, Mineral Conservation and Development Rules-1988. In the major minerals (including Oil & Natural Gas), Gujarat is placed at 3 position as on March-2002 in Mineral Production value. Gujarat ranks second in working mining leases. Only Gujarat produces minerals like Agate, Chalk and Perlite in the country. Production wise Gujarat ranks first in Fluorite and Silica sand, second in Bauxite, Lignite, Fire clay and Clay (others) and third in Quartz and Ball clay and fourth in Limestone and China clay.

 

 

 

Agro and Food Processing: Project Opportunities in Gujarat

 

 

PROFILE:

Agro Industry means a unit which adds value to agricultural products/intermediates/residues; both food and non-food; by processing into products which are marketable or usable or edible, or by improving storability, or by providing the link from farm to the market or a part thereof. The term “agro-food processing industries” covers a wide range of activities utilizing farm, animal and forestry based products as raw materials. Agriculture sector contributes one-fourth of the country’s GDP. India is the largest producer of milk, fruits, pulses, cashew nuts, coconuts and tea in world and accounts for 10 % of the world fruit production. India’s food grain production is expected to rise to 208.5 million tons by March 2006, from 204.6 million tons in 2005. Horticulture sector contributes 30 % of the agriculture GDP and accounts for 8.5 % of cultivated area. In the Global food processing industry Asia-pacific is accounting for 31.10 % of global market. India is the World’s second largest producer of food, next to China and has potential to be number one.

 

RESOURCES:

Gujarat is endowed with abundant natural resources in terms of varied soil, climatic conditions and diversified cropping pattern suitable for agricultural activities. Gujarat is a leading producer of various agricultural crops within India as well as worldwide. Gujarat has highest production in the world for Castor (67%), Fennel (67%), Cumin (36%), Isabgol (35%), groundnut (8%), and Guar seed (6%). The state has also emerged as a frontrunner in several other sectors such as Dairy, Fisheries, Animal Husbandry, Traditional Horticulture and Floriculture. Gujarat is keen to promote the agro-processing industry, which currently consists of small and medium enterprises producing a wide variety of products. It has about 16,400 small enterprises in food processing, beverage and tobacco processing. The agro-processing sector accounts for a significant proportion of the working population in the State. Moreover, the State is well known for its success in dairy cooperatives. Gujarat Cooperative Milk Marketing Federation enjoys a significant market share in the processed foods sector.

GOVERNMENT POLICIES:

The Gujarat Agro Vision 2010 has been formulated with defined growth parameters of gross state domestic product, per capita income and increase in non farm income of rural population due to multiplier effect. A holistic approach has been envisaged with emphasis on agricultural research, conservation of soil and water, economic and social sustainability. A comprehensive Agro Industrial Policy 2000 has been formulated. Tiny, small, medium and large agro industrial units shall be given 6% back ended subsidy for 5 years on the interest on term loan, subject to a ceiling of Rs. 100 lacs. Gujarat government has announced a new Agri Business Policy during the summit 2009. Gujarat government has offered various incentives to attract the investment in agriculture and allied sectors. Some of the incentives include declaration of food processing industry as seasonal industry, cost subsidy to large projects in food processing sector and sops and incentives to enhance competitiveness of small and medium enterprises, etc.

 

SALT INDUSTRY:Project Opportunities in Gujarat

 

 

PROFILE:

India is the third largest Salt producing Country in the World after China and USA with Global annual production being about 230 million tonnes.  The growth and achievement of Salt Industry over the last 60 years has been spectacular.  When India attained Independence in 1947, salt was being imported from the United Kingdom & Adens to meet its domestic requirement.  But today it has not only achieved self-sufficiency in production of salt to meet its domestic requirement but also in a position of exporting surplus salt to foreign countries.  The production of salt during 1947 was 1.9 million tonnes which has increased tenfold to record 20 million tonnes during 2005. The main sources of salt in India are sea brine, lake brine, sub-soil brine and rock salt deposits. Sea water is an inexhaustible source of salt.  Salt production along the coast is limited by weather and soil conditions.

RESOURCES:

Gujarat is blessed with the longest coastline of 1600 km. in India, offering important resources such as salt and marine products for industry. Gujarat is the largest producers of salt in India and ranking 2nd highest export in the world. Gujarat contributes 76 percent to the total production, followed by Tamil Nadu (12 %) and Rajasthan (8%). It also became the highest tax charging state for salt production amongst the six other salt producing states. Apart from using salt for edible purposes, it is substantially used for production of inorganic chemicals.

 

 

 

GOVERNMENT POLICIES:

Salt is a Central subject in the Constitution of India and appears as item No.58 of the Union List of the 7th Schedule, which reads:

a)   Manufacture, Supply and Distribution of Salt by Union Agencies; and

b)   Regulation and control of manufacture, supply and distribution of salt by other agencies.

Central Government is responsible for controlling all aspects of the Salt Industry. Salt Commissioner’s Organisation plays a facilitating role in overall growth and development of Salt Industry in the country. The thrust of the Salt Commissioner’s Organisation currently is on Technological Development and Quality Improvement, Salt Iodisation Program for combating Iodine Deficiency Disorders, Infrastructure Development promoting Salt Industry, Labour Welfare Schemes for Salt Workers particularly housing under Namak Mazdoor Awas Yojna and export of Salt.

 

 

GEMS AND JEWELLERY:Project Opportunities in Gujarat

PROFILE:

Gems and jewellery industry in India occupies a significant position in the Indian economy. It is also one of the fastest growing Industries in the country. The cutting and polishing of Diamonds and precious stones is one of the oldest traditions in India and the country has earned considerable goodwill, both, in the domestic and international markets for its skills and creativity. India was also the first country to have introduced diamonds to the world. The country was the first to mine diamonds, cut and polish them and also trade them. It accounted for 16.7 per cent of India's total Merchandise Exports. At present India exports 95% of the world’s diamonds.

 

RESOURCES:

Gujarat is the leading state in India in gems and jewellery sector, as it contributes to about 72% of the total exports of India. Gujarat has a well established diamond industry. Diamond processing and trading unit are spread across the State in cities such as Surat, Ahmedabad, Palanpur, Bhavnagar, Valsad and Navsari. Gujarat accounts for about 80% of diamonds processed and 95% of diamonds export from India. Surat has 65% share in India's diamond trade. Highly skilled workforce Gujarat’s comparatively cheaper and skilledworkforce can be effectively utilized to setup large low cost production bases for domestic and export markets. Gujarat’s Gems & Jewellery sector is expected to grow at a rate of 15%.

 

GOVERNMENT POLICIES:

The government's interest in the sector is evident from the FDI policy which allows 100% FDI and 74% in exploration and mining of diamonds and precious stones and 100% for gold and silver and minerals exploration, mining, metallurgy and processing. Gems and Jewellery, diamonds and precious metals have been given a special thrust by the Ministry of Commerce & Industry, Government of India, under the Foreign Trade Policy through the following measures:

·         Allowing 100 per cent FDI in the gems and jewellery sector under the automatic route;

·         Abolishing duty on polished diamonds;

·         Lowering import duty on platinum and exempting rough, coloured, precious gems stones from customs duty.  Rough, semi –precious stones are also exempted from import duty;

·         Setting up of Gems and Jewellery Parks and SEZs to stimulate sectoral investments;

·         Allowing import of gold of 8 k and above under replenishment scheme, subject to the condition that import being accompanied by an Assay Certificate specifying purity, weight and alloy content;

·         Permitting import of Diamondson consignment basis for Certification /Grading, and re-export by the authorized offices/agencies of Gemological Institute of America (GIA) in India or other approved agencies.

 

CHEMICALS AND PETROCHEMICALS: Project Opportunities in Gujarat

 

 

PROFILE:

The Chemical and Petrochemical Industry occupies an important place in the country's economy, as the Chemical industry has grown at a pace outperforming the overall growth of the industry. Chemical industry is an important constituent of the Indian economy. Its size is estimated at around US$ 35 billion approx., which is equivalent to about 3% of India's GDP. The total investment in Indian Chemical Sector is approx. US$ 60 billion and total employment generated is about 1 million. Today, petrochemical products permeate the entire spectrum of daily useitems and cover almost every sphere of life like clothing, housing, construction, furniture, automobiles, household items, agriculture, horticulture, irrigation, packaging, medical appliances, electronics and electrical etc. Chemicals and Petrochemicals contribute to more than 62 % of national petrochemicals and 51% of national Chemical sector output. It leads all states in India in terms of the investments committed in the chemical and petrochemical sector, 30% of fixed capital investment is in the manufacturing of Chemical and Chemical Products. Manufacturing of chemicals and chemical products contribute to around one fifth of the total employment in state. The production capacity of major suppliers of polymers, PE/PP/PVC in Gujarat is nearly 70% of the whole country’s production. Large quantity of production of basic chemicals caustic soda, caustic potash and chloromethane, largest supplier of bio fertilizers, seeds, Urea and other fertilizers

 

RESOURCES:

Gujarat's chemicals and petrochemicals industry is one of the fastest growing sectors in the State's economy. The industry offers a wide spectrum of opportunities for the investors both from India and abroad. The well diversified chemical industry has complete portfolio of chemical products including petrochemicals and downstream products, pharmaceuticals, dyes and intermediates. The Chemical Industry in Gujarat comprises of about 500 large and medium scale industrial units, about 16,000 of small scale industrial units and other factory sector units. Gujarat emerged as leading Indian states in terms of the investments committed in the chemical and petrochemical sector. It contributes to more than 62% of national petrochemical and 51% of national chemical sector output. Around 6,000 chemical and petrochemicals products are produced in the state. Manufacturing of chemicals and chemical products contributes to around one fifth of the total employment in state. The chemical industry in Gujarat is a significant component of the State's economy, contributing to more than 51% of Indian production of major chemicals with revenues at approximately more than INR 12,000 crore. Petrochemical Industry in Gujarat produces 13,048 ('000 Tonnes) of petrochemical products and also contributes around 62% to the total production of the country. Gujarat contributes 15% of the total national chemical exports.

 

GOVERNMENT POLICIES:

In Chemical sector, 100% FDI is permissible, manufacture of most chemical products inter-alia covering organic/inorganic, dyestuffs and pesticides is de licensed. The entrepreneurs need to submit only IEM with the Department of Industrial Policy and Promotion provided no locational angle is applicable. Only the following items are covered in the compulsory licensing list because of their hazardous nature: Hydrocyanic acid and its derivatives, Phosgene and its derivatives,Isocynates and di-isocynates of hydrocarbons.

 

TEXTILES:Project Opportunities in Gujarat

 

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Gujarat is one of the leading industrial states in India and textile industry in particular had contributed in a big way to the industrialisation of the State. In fact, development of many industries likes, Dyestuff, Chemicals, Engineering/Foundry and Cotton farming is solely dependent on this sector. The State is well known for development of Hybrid Cotton, Ginning, power looms, composite mills, spinning units and independent processing Houses. Gujarat being the largest producer of cotton, has obtained tremendous opportunities towards higher and higher value addition product by setting up Modern Process Houses (with the technology of low polluting and less energy costs) in one hand and Knitwear/Ready-made Garments in a big way on the other to fulfil the domestic and international market. Investment opportunities may be, therefore, explored for Cotton Ring Spinning (25,000 spindles), Open End Spinning (1000 rotors), Modern Process House, Shuttleless Weaving (50 looms), Ready-made garments unit and Non-woven and Technical Textile unit with appropriate technology. Bandhani or Bandhej of Gujarat is one of the best tie and dye fabrics in India. Dhamadka and Ajrakh, Mashru are some of the other fabrics of Gujarat. Dhamadka is the art of printing fabrics with wooden blocks. Mashru is a mixed fabric, woven with a combination of cotton and silk. It was originally used by Muslim men, as they were prohibited from wearing pure silk.

 

GOVERNMENT POLICIES:

The Gujarat government is planning to come up with a policy to boost the textile and apparel industry in the state and help it remain competitive in the post-quota regime of the World Trade Organisation. Gujarat’s textile policy provides incentives that are more favourable for large textile units. It provides 25% capital subsidy on purchase of machineries. Custom duty on textile machinery is only 5%. Also, various human resource development activities for the textile industry have been initiated by state government. Subsidy at 50% of R&D expenditure is provided to industries carrying out research. Interest subsidy at 3% is provided for capital equipment for five years. Assistance is also provided for infrastructural development, market promotion and environment protection. Gujarat is also the largest producer and exporter of cotton, the production of which has been increasing over time. So raw material is plentiful. It is the largest producer of denim. Surat is a strong base for synthetic fibers and provides a big market.

 

Waste management: Project Opportunities in Gujarat

 

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Gujarat is an ideal location for an effective functioning of the projects, which depend on reasonable volume of generated wastes, waste characteristics, public acceptance and potential network of the industry for the zero discharge of the waste. Gujarat is characterized by wide spread industrial establishments, robust infrastructure development and stable socio-political environment. The industrial development has remained and is the robust backbone of Gujarat’s economical and industrial prospects and a driving force of a future economic growth. In a meantime, the rapid industrial development throughout the state has lead resulted in generating abundant industrial wastes which need proper care in pollution mitigation and recycling in and around urban centres of Ahmedabad, Bharuch, Surat etc. 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 138 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 138 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Blanket from Wool or Woollen Waste or Woollen Rags

Blanket A blanket is a piece of soft cloth large enough either to cover or to enfold a great portion of the user's body, usually when sleeping or otherwise at rest, thereby trapping radiant bodily heat that otherwise would be lost through convection, and so keeping the body warm. Wool blankets are one of the best in the world. Wool blankets are made of wool sourced from animals that are a lot better at surviving harsh winters than humans, and that includes sheep, alpacas, and yaks. Some wool blankets are crafted with a mix of wool and other materials. Wool blankets are one of the main items I look for at garage sales, thrift stores, and antique stores. Textiles are usually pretty inexpensive when you find them used. Wool blankets might have a high price tag, even at a thrift store if they are considered collectible. The Blanket Market is subject to witness a substantial growth due to the growing consumer awareness, wide range of prices and design available in the market. Introduction of electric blankets are expected to attract more customers, thus boosting overall sale of the product. Blankets, which typically see a huge demand from winter customers, were seen in colours such as orange, pink, red, blue, yellow, green etc. It usually comes with charming designs with flowers, leaves, or popular cartoon characters. It’s fabric is soft fluffy flannel, acrylic or woolen.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Ductile Iron Pipe Fittings Production for Water & Sewage

Ductile Iron Pipe Fittings Production for Water & Sewage. DI Pipes Fittings Manufacturing Business Opportunity Ductile Iron Pipe Fittings Ductile iron pipes are available in a range of diameters from 80mm to 1600mm and are suitable for both potable water transmission, distribution and sewerage. Ductile iron pipes are simple to joint, can be laid in all weather conditions and often without the need for selected backfill. Its high safety factor and ability to accommodate ground movement make it the ideal pipeline material for a wide range of applications. Ductile's high degree of dependability is primarily due to its high strength, durability, and impact and corrosion resistance. Ductile Iron has minimum strength requirements of 60,000 psi tensile strength, 42,000 psi yield strength, and 10 percent minimum elongation. Designed and manufactured to the industry's most stringent standards, Ductile Iron Pipe resists damage during shipping and handling, and, once installed, withstands the most demanding operating conditions, including water hammer, frozen ground, deep trenches, areas of high water table and heavy traffic, river crossings, pipe on supports, rocky trenches, and areas of shifting, expansive, and unstable soils. Ductile iron pipe is a pipe made of ductile cast iron commonly used for potable water transmission and distribution. This type of pipe is a direct development of earlier cast iron pipe, which it has superseded. The ductile iron used to manufacture the pipe is characterized by the spheroidal or nodular nature of the graphite within the iron. Ductile Iron pipes are pipes made of ductile iron. They are commonly used for potable water distribution and the pumping of slurries, sewage and process chemicals. Ductile iron is a spheroidized graphite cast iron. Ductile iron pipes are a direct development of earlier cast iron pipes which it has now almost replaced. The high level of dependability on ductile iron pipes is due to its various superior properties and it is a most sought after pipe for many applications. Benefits of Ductile Iron Pipe The strong, safe, and reliable product has stood the test of time. Modern Ductile Iron Pipe is made to last over 100 years, and is an environmentally preferable product due to its recycled content, energy savings while in service, its durability, its own recyclability and because of the commitment of the Ductile Iron Pipe industry. Market Outlook The India market for Ductile Iron Pipe is expected to reach about 930.73 million USD by 2022 from 105.29 million USD in 2017. The ductile iron pipe market can be segmented based on type of joint, application, and region. Based on type of joint, the ductile iron pipe market can be classified into flanges and spigot & socket. Flanges are flat rings around the end of pipes that mate with an equivalent flange from another pipe. The two are held together by bolts usually passed through holes drilled through the flanges. Ductile iron pipes are also durable and can withstand extreme ranges in temperature. New and advanced technologies are emerging in order to reduce the costs and improve the quality of ductile iron pipes. The Ductile Iron pipes market in India is set to grow in the short term and medium term (2 – 5 years) clocking consistent growth rates, with major players ramping up their operations along with a sudden surge in demand in the Indian markets as well as export markets like South Asia, Middle East and North Africa. Market Segment by Regions, regional analysis covers are North America (USA, Canada and Mexico), Europe (Germany, France, UK, Russia and Italy), Asia-Pacific (China, Japan, Korea, India and Southeast Asia), South America (Brazil, Argentina, Columbia etc.) and Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa) Ductile Iron Pipe Sector, Ductile pipe market has witnessed strong demand in the market owing to growth in water infrastructure activities and high demand in commercial sectors. The primary growth drivers for ductile iron pipes in India have been poor access of safe drinking water, poor sanitation coverage in the country. Ductile iron pipes for water management (in terms of revenue) dominated the market among all the sectors. Ductile iron pipe for water management contributed approximately ~% of the total revenue. DI pipes used for sewerage purpose contributed to ~%. Key market players in the ductile iron pipe market are Saint Gobain, Kubaat, US PILE and Foundry Company, Jindal SAW, Xinxing Ductile Iron Pipes, SUNS, etc. Tags #Production_of_Ductile_Iron_Pipe_Fittings, #Ductile_Iron_Pipe_Fitting, #Ductile_Iron_Pipes, Ductile Iron Pipe Manufacturing Process, Manufacturing Process of Ductile Iron Pipe, #Ductile_Iron_Pipe_Production_in_India, Ductile Iron Pipe Industry, Ductile Iron Pipe Fittings Production in India, #Production_of_Ductile_Iron_Pipe_Fittings_for_Water_&_Sewage, Ductile Iron Pipe Fittings Industry in India, Ductile Iron Pipe and Fittings, Ductile Iron Pipe Making Business, Ductile Iron Pipe Production, Production of Pipes and Fittings, Ductile Iron Pipe Manufacturing Process Pdf, #Ductile_Iron_Fittings_Manufacture, Manufacturing of Ductile Iron, Ductile Iron Pipe Fittings for Water & Sewage, Project Report on Ductile Iron Pipe Manufacturing Industry, #Detailed_Project_Report_on_Production_of_Ductile_Iron_Pipe_Fittings_for_Water_&_Sewage,Project Report on Production of Ductile Iron Pipe Fittings for Water & Sewage, Pre-Investment Feasibility Study on Production of Ductile Iron Pipe Fittings for Water & Sewage, #Techno_Economic_feasibility_study_on_Production_of_Ductile_Iron_Pipe_Fittings_for_Water_&_Sewage, #Feasibility_report_on_Production_of_Ductile_Iron_Pipe_Fittings_for_Water_&_Sewage, #Free_Project_Profile_on_Production_of_Ductile_Iron_Pipe_Fittings_for_Water_Sewage,Project profile on Ductile Iron Pipe Manufacturing, Download free project profile on Production of Ductile Iron Pipe Fittings for Water & Sewage
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Internet Service Provider

An Internet service provider (ISP) is an organization that provides services for accessing, using, or participating in the Internet. Internet service providers may be organized in various forms, such as commercial, community-owned, non-profit, or otherwise privately owned. An Internet service provider (ISP) is a company that provides customers with Internet access. Data may be transmitted using several technologies, including dial-up, DSL, cable modem, wireless or dedicated high-speed interconnects. The global telecommunications sector is a bastion of global growth. The Global Internet Service Providers (ISPs) industry, however, has had its demand siphoned by operators in wireless telecommunications, truncating revenue growth to an extent. As a business, ISPs have to focus on providing a consistent and high quality service to its customers as well as delivering a good return on investment for its shareholders. But lately it seems ISPs are being pulled in so many other directions which, in some cases, appear to be in direct conflict with their primary objective.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Medical Transcription Centre

Medical transcription, also known as MT, is an allied health profession dealing with the process of transcribing voice-recorded medical reports that are dictated by physicians, nurses and other healthcare practitioners. Medical reports can be voice files, notes taken during a lecture, or other spoken material. These are dictated over the phone or uploaded digitally via the Internet or through smart phone apps. Medical Transcription is a permanent, legal document that formally states the result of a medical investigation. It facilitates communication and supports the insurance claims. There are three main processes involved in Medical Transcription. Medical transcription, in short called as MT, is fast becoming one of the most sought after home-based professions in India as well as in several developed countries. Medical transcription can be defined as a process of transcribing or converting recorded dictations by physicians and/or other healthcare professionals regarding a patient's medical record into a written text. The global medical transcription services market is known to be highly competitive and challenging and is predicted to grow much faster in 2018 due to the rise in healthcare automation services in most regions of the world. To stay ahead in the competition, companies need to embrace the changes in the market and follow the trends and predictions of the outsourcing field. The medical transcription market in Eugene is spread out. On one hand you have two groups of doctors that regularly need a medical transcription service. These are physicians and psychologists who practice alone. Both of these groups have the need for transcribers because they are typically too small to warrant their own in-house employee. Medical transcription has extended definitions of healthcare services by enabling physicians and specialty physicians to treat patients across the globe, refer documents in history for special cases and guide for physicians in case of transfer of patient from one physician to another for better treatment.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Shaving Cream

Shaving Cream or shaving foam is a frothy cosmetic cream applied to body hair, usually facial hair, to facilitate shaving. The use of cream achieves three effects: lubricates the cutting process; swells keratin; and desensitizes skin. Shaving creams commonly consist of an emulsion of oils, soaps or surfactants, and water. Blades with polymeric coating reduce the need for shaving creams. Shaving Cream is one of those necessary products that go along side any sort of razor of your choice. Whether you choose to use a disposable, cartridge, electric, straight edge, or even the best double edge safety razor – men (and women) always have asked themselves time and time again ‘What does shaving cream really do when applied to your skin. In 2017, the global Shaving Cream market size was million US$ and is forecast to million US in 2025, growing at a CAGR of from 2018. The objectives of this study are to define, segment, and project the size of the Shaving Cream market based on company, product type, application and key regions. Shaving Cream Market is segmented on the basis of various parameters. The factors which are impacting the market’s growth are studied in detail.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Steel Safety Pins

The safety pin is a variation of the regular pin which includes a simple spring mechanism and a clasp. The clasp serves two purposes: to form a closed loop thereby properly fastening the pin to whatever it is applied to, and to cover the end of the pin to protect the user from the sharp point. Safety pins are commonly used to fasten pieces of fabric or clothing together. Safety pins, or more usually a special version with an extra safe cover, called a nappy pin, or loincloth pin, are widely used to fasten cloth diapers (nappies), or modern loincloths, as the safety clasp, while remaining ingestion hazard, prevents the baby or boy from being jabbed.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Cheese Analogues Production

Cheese Analogues Production. Analogue Cheese Manufacturing Business. Commercial Cheese Processing Project Cheese analogues are usually defined as products made by blending individual constituents, including non-dairy fats or proteins, to produce a cheese-like product to meet specific requirements. They are being used increasingly due to their cost-effectiveness, attributable to the simplicity of their manufacture and the replacement of selected milk ingredients by cheaper vegetable products. Cheese analogue cost less to make than real cheese. By carefully choosing the ingredients in the analogue, other characteristics such as the melting temperature and the taste can be changed. Flavor enhancers can be added to make the product taste similar to Parmesan, feta or Camembert cheese, for example. Food coloring is used to match the color of a cheese product. Development of cheese analogues involves the use of fat and/or protein sources other than those native to milk, together with a flavor system simulating as closely as possible that of the natural product. It is also necessary to develop a suitable processing regime capable of combining these elements to provide the required textural and functional properties. Cheese analogues (more widely known as cheese alternatives) are products used as culinary replacements for cheese, but have properties such as different melting points or lower costs that make them attractive to businesses. Cheese analogues are the products made out of dairy, partial dairy or non-dairy ingredients, which tend to resemble the particular standardized cheese variety in question. The growing gap between the demand and production of cheese and the customer's preference for a 'tailor-made' convenience product has necessitated production of cheese analogues. Cheese analogues (more widely known as cheese alternatives) are products used as culinary replacements for cheese. These include vegan cheeses as well as some dairy products, such as processed cheese or Kraft Singles that do not qualify as true cheeses. These foods may be intended as replacements for cheese, as with vegan products, or as imitations, as in the case of products used for salad bars and pizza-making, which are generally intended to be mistaken for real cheese, but have properties such as different melting points or lower costs that make them attractive to businesses. Market Outlook In 2017, the global Analog Cheese market size was million US$ and is forecast to million US in 2025, growing at a CAGR of from 2018. Cheese Analogues are the products that are used as cheese alternatives or substitutes. Cheese Analogues are the products that are made as a result of a blending substances such as individual constituents along with non-dairy fats and proteins to come up with a product that is like cheese. Cheese analogues are also called as imitation cheese, this is being preferred as they are cost effective and easy to produce as compare to the conventional cheese. The cheese analogues due to the properties such as easy to cut, stretch and melt are dominantly used by pizza makers. Cheese analogues are used increasingly used in the convenience food products where it aids in extending the supply and lowering the cost. Cheese Analogues market is currently experiencing a growth in demand due to need of reduction in prices of cheese production. Cheese analogues are produced with the help of different types of methods and production techniques. Cheese analouges produced with the help of individual constituent, soya oil and casein etc are cheaper alternatives for milk dry matter. This requires simple production method, less number of laborers and lower equipment cost, making it a cheaper alternative. Cheese Analogues have longer shelf life as compared to conventional cheese. The European and North American markets are the largest contributors to the growth of the Cheese Analouge market. Growth in increased use of Analouge cheese in regions like Africa and Asia pacific is also expected to boost the growth of the overall cheese analouges market. Cheese is widely used in fast foods and readymade conventional meals. Cheese is an essential component in frozen pizzas. The costs associated with natural cheese, seasonal price fluctuation, and storage requirements have prompted the fast food industry to search for alternatives to natural cheese. Cheese Analogues market is currently experiencing a growth in demand due to need of reduction in prices of cheese production. Cheese analogues are produced with the help of different types of methods and production techniques. Cheese analogues produced with the help of individual constituent, soya oil and casein etc. are cheaper alternatives for milk dry matter. This requires simple production method, less number of laborers and lower equipment cost, making it a cheaper alternative. One of the major factor driving the growth of the Cheese Analogues is the low fat and less salt content as consumers prefer food that contains less salt and saturated fat. Cheese Analogues have longer shelf life as compared to conventional cheese. The European and North American markets are the largest contributors to the growth of the Cheese Analogue market. Growth in increased use of Analogue cheese in regions like Africa and Asia pacific is also expected to boost the growth of the overall cheese analogues market. Cheese analogues are gaining increasing acceptance with food processors and consumers because of many potential benefits. In the US cheese analogues are generally manufactured to have nutritional equivalence or in some cases to have nutritional advantages over the natural counterpart cheese. Cheese Market Global Cheese Market is expected to reach $164,338 million by 2023, from $136,283 million in 2016, growing at a CAGR of 2.7% from 2017 to 2023. Cheese is a highly nutritious and palatable milk-derived food product found in wide range of textures, tastes, and aromas globally with around 2000 varieties at present. The distinction between texture and taste is determined by raw material used during preparation of cheese, such as type & breed of milk producing animal, grazing and climatic factors, and others. Cheese consumes about one-tenth volume of the milk, making it portable with longer shelf life compared to milk. In addition, it is rich in nutrients such as protein, essential minerals, fat, calcium, and others. Moreover, it offers certain health benefits such as stronger teeth & bones, healthy heart (if consumed in moderate quantity), prevention of osteoporosis, and others. Furthermore, certain types of cheese such as cheddar, parmesan, Roquefort, and others can be easily consumed by lactose intolerant and milk allergic people. The global cheese market is segmented based on source, type, product, distribution channel, and geography. Based on source, it is divided into cheese obtained from cow milk (whole milk and skimmed milk), sheep milk, goat milk, and buffalo milk. The type segment is bifurcated into natural cheese (hard cheese and soft cheese) and processed cheese (spreadable cheese and block cheese). By product, it is classified into mozzarella, cheddar, feta, parmesan, Roquefort, and others. Based on distribution channel, it is divided into hypermarkets, supermarkets, food specialty stores, convenience stores, and others. Geographically, it is analyzed across North America, Asia-Pacific, Europe, and LAMEA. Indian Cheese market is expected to show double digit growth. Processed cheese market in India is expected to grow with above average CAGR that includes products such as slices, cubes and slabs. Processed cheese segment is well organized and have several Indian and International players. India cheese market has grown with 23% CAGR approximately in review period from 2011-12 to 2016-17. India cheese market is made up of retail cheese market and institutional cheese market in which later has dominance over former. The strong growth of the market can be attributed to numerous forces. The growing fast food industry represents one of the primary factors driving the demand for cheese. Some of the other factors include changing dietary habits, influence of westernization, rising disposable incomes, etc. Tags #Production_of_Cheese_Analogues, #Cheese_Analogue_Manufacturing, #Processed_Cheese, Startup Cheese Analogues making Business, Cheese Making Business, #How_to_Start_a_Cheese_Making_Business, Cheese Analogues Industry in India, Cheese Analogues Manufacturing Process, Indian Cheese Industry, #Cheese_Production, #Cheese_Analogues_Production_Process, Processed Cheese and Analogues, #Project_Report_on_Cheese_Analogue_Manufacturing_Industry, Detailed Project Report on Cheese Analogues Production, Project Report on Cheese Analogue Manufacturing, Pre-Investment #Feasibility_Study_on_Cheese_Analogues_Production, Techno-Economic feasibility study on Cheese Analogues Production, Feasibility report on Cheese Analogues Production, #Free_Project_Profile_on_Cheese_Analogues_Production, Project profile on Cheese Analogue Manufacturing, Download free project profile on Cheese Analogues Production, Production of Processed Analogue Cheese, #Cheese_and_Cheese_Analogues, Processed Cheese Manufacturing, Manufacture of Cheese Analogue, Start Your Own Cheese Making Business, Cheese Manufacturing Business, Project Profile on Dairy Products, Processed Cheese Manufacturing Business, Business Plan for Cheese Production, Cheese Making Process, Cheese Manufacture, Cheese Manufacturing Industry
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Ferric Oxide

Iron(III) oxide or ferric oxide is the inorganic compound with the formula Fe2O3. It is one of the three main oxides of iron, the other two being iron(II) oxide (FeO), which is rare, and iron(II,III) oxide (Fe3O4), which also occurs naturally as the mineral magnetite. As the mineral known as hematite, Fe2O3 is the main source of iron for the steel industry. Fe2O3 is readily attacked by acids. Iron(III) oxide is often called rust, and to some extent this label is useful, because rust shares several properties and has a similar composition. Ferric oxide is one of the oxides of iron. It is also known as iron (III) oxide and its chemical formula is Fe2O3. It is an inorganic compound. The other two oxides of iron are iron (II) oxide having the chemical formula FeO and iron (II,III) oxide having the chemical formula Fe3O4. Iron oxides are commonly available chemical compounds composed of iron (Fe) and oxides and are mainly used in the form of iron ores, pigments, catalysts, etc. Iron oxides are produced from both natural and synthetic resources. Natural iron oxides are mainly derived from (1) hematite (Fe2O3), a red iron oxide mineral, (2) limonites (FeOOH), which in colour vary from yellow to brown, such as ochers, siennas and umbers, and (3) magnetite (Fe3O4), a black iron oxide. Iron oxide pigments are durable colored pigments used in various applications such as constructions, industrial coatings, varnishes, paper, fertilizers, and plastics. These are nontoxic inorganic pigments composed of iron oxides and oxyhydroxides with relatively economical prices. Iron oxide pigments are of two types namely synthetic or natural. The basic property that differentiates synthetic iron oxide pigments from the natural is the purity level, which is lower in natural iron oxide pigments. The level of contamination defines the working efficiency of these pigments.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Aluminium Hydroxide Gel

Aluminium hydroxide is a typical antacid active. It can be used alone or in combination with magnesium hydroxide to obtain the desired acid neutralizing capacity (ANC). Aluminium hydroxide as an antacid is not exactly an Aluminium hydroxide (Al(OH)3). Aluminium hydroxide gels are amorphous in nature and contain carbonate in the gel structure. The presence of carbonate increases the reactivity of the Aluminium, allowing for its acid-neutralizing capacity and making it a more effective antacid. Aluminium hydroxide gels and powders are available worldwide and provides the consistent quality required for pharmaceutical use. Aluminium hydroxide, Al(OH)3, is found in nature as the mineral gibbsite (also known as hydrargillite) and its three much rarer polymorphs: bayerite, doyleite, and nordstrandite. Aluminium hydroxide is amphoteric in nature, i.e., it has both basic and acidic properties. Closely related are aluminium oxide hydroxide, AlO(OH), and aluminium oxide or alumina (Al2O3), the latter of which is also amphoteric. These compounds together are the major components of the aluminium ore bauxite. Aluminum hydroxide is used to treat heartburn, upset stomach, sour stomach, or acid indigestion. Aluminum hydroxide is also used to reduce phosphate levels in people with certain kidney conditions. Aluminum hydroxide may also be used for purposes not listed in this medication guide. The global aluminum hydroxide market is expected to witness a CAGR of approximately 4.6% during the forecasted period.Aluminum hydroxides find application as fire retardants in polymer applications, as these compounds address the need for safety, durability, and insulation in many applications. Aluminium hydroxide (Gel) I.P. is used as an antacid and protective in the treatment of peptic ulcers. It is also used as astringent & antiseptic in cases of marked hyper acidity. It is used externally as a mild astringent and desiccant, and internally as an antacid and protective agent. Aluminium hydroxide is generally used in combination with other similar chemicals like Magnesium hydroxide & Magnesium trisilicate in the form of powder or paste, depending upon the final product i.e. tablet or suspension. Global Aluminum Hydroxide Gel Market is expected to gain a positive CAGR in the forthcoming period. Aluminum hydroxide gel is a naturally occurring mineral comprising three layers namely polymorphs, bayerite, doyleite&nordstrandite. Aluminum hydroxide gel is also known as gibbsite. Gibbsite possess a typical metal hydroxide structure comprised with hydrogen bombs.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Jaggery (Gur) from Sugar Cane (Export Quality)

Gur (jaggery) is a natural product of sugarcane. It is in more unrefined form than sugar. It is a brown raw mass of sucrose which gets it color because of other elements found in concentration such as wood ash and bagasse. Jaggery or "Gur" or whole sugar is a pure, wholesome, traditional, unrefined, whole sugar. It contains the natural goodness of minerals and vitamins inherently present in sugarcane juice & this crowns it as one of the most wholesome and healthy sugars in the world. Gur plants are located in rural areas of Sugarcane leading zones of Uttar Pradesh and Tamilnadu mainly. It is an unorganized industry. This is a second major rural industry in north U.P. region and has good employment opportunities also. Gur making process is simple and cheep as compared to sugar. The annual market demand for non refined sugar i.e. Gur is about 5Lakh MT/ year in India. The demand for this product is about 2 Lakh MT each at two major market cities of Mumbai and Ahmedabad. About 80% of demand at Mumbai is net from three wholesale markets at Pune, Sangali and Kolhapur which receive the product from adjoining villages in Maharashtra, North Karnataka. This demand is ever increasing in last 5 years.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 138 of 295 | Total 2950 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 138 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top