Google Search

Search

Already a Member ?

Electrical, Electronic Industries and Power Projects

Electric equipment industry contributes over 2% of GDP which is projected to increase to about 12% in 2015 according to a study by Frost & Sullivan. During the period, consumption of electrical equipment is estimated to increase from over USD 28 billion now to USD 363 billion, growing at a CAGR of about 30%. It is also expected that during 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production.

The electrical equipment and accessories industry, with its highly diversified content, may be broadly segmented into (i) generation equipment, (ii) transmission equipment, and (iii) distribution equipment. The equipments and accessories under these segments include motors, turbines, generators, switchgears, transformers, circuit breakers, induction motors, power capacitors, meters, transmission towers. Besides these, the spectrum covers a whole range of power cables including XLPE and AAC and ACSR conductors and electrical consumer products like fans, electric lamps, exhausts and domestic appliances and accessories. Inverters, gensets, UP also fall under its domain.

The electrical industry has been showing signs of recovery after poor performance in the recent years. The domestic electrical industry, which includes equipment for generation, transmission, distribution and use of power in industrial units, constitutes a major part of the electrical products.

The growth of the industry is directly related to the development of power generation and distribution. India's generation capacity of 2,300 MW in 1950 expanded to over 116,500 MW including non-utilities at the end 2000-01. The total installed capacity of electric power generation further increased to 141,080 MW in 2007-08 (upto January 2008) compared to a capacity of 128,000 MW during the same period in 2006-07. The Eleventh Plan has targeted a capacity addition of 78,570 MW.

The five years (2007-2012) may be the best of times for power equipment makers with the power sector on an expansion spree. With order-book growth expanding over the last three years, there is a good chance that this will continue. Close to 82% of the planned generation capacity for the Tenth Plan was either implemented or was in the process of being implemented. Even assuming a 70% implementation ratio for the Eleventh Plan, close to 55,000 MW will be added. Five ultra mega power projects, totaling 20,000 MW are coming up in 2008. In the transmission sector, for example, Power Grid Corporation is planning a capex of Rs 710 billion by 2010.

Earlier, the shortfalls in achieving the Plan targets of addition to power generation and up-gradation of transmission and distribution had adversely affected the electrical equipment industry. The peak shortage which was over 11% of the requirement in 2003-04 increased to 11.7% in 2004-05 and to over 12% in 2005-06. The shortage further rose to about 14% in 2006-07. In the ten months of 2007-08 the peak shortage had risen to over 15% of the peak demand of 107,010 MW.

Major players in electrical equipment segment are ABB, BHEL, BHEL Power Solutions, Havell's India, Kirloskar Electric, Crompton Greaves and Suzlon Energy.

According to the Power Ministry, the power sector has tied up Rs 2,240 billion worth of investments to build power plants with 70,000 MW capacities in the next three years.

With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active.

 

 

Reasons for buying our reports:

This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

This report provides vital information on the product like its characteristics and segmentation

This report helps you market and place the product correctly by identifying the target customer group of the product 

This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

The report provides a glimpse of government regulations applicable on the industry

The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

We use reliable sources of information and databases. And information from such sources is processed by us and included in the report

 


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 8 of 17 | Total 164 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Solar Panel

A solar panel is a collection of solar cells. Lots of small solar cells spread over a large area can work together to provide enough power to be useful. The more light that hits a cell the more electricity it produces, so spacecraft are usually designed with solar panels that can always be pointed at the Sun even as the rest of the body of the spacecraft moves around, much as a tank turret can be aimed independently of where the tank is going. Solar panel refers either to a photovoltaic module, a solar thermal energy panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Uses Assemblies of photovoltaic cells are used to make solar modules which generate electrical power from sunlight, as distinguished from a "solar thermal module" or "solar hot water panel." The electrical energy generated from solar modules, colloquially referred to as solar power, is an example of solar energy. The PV MARKET has been on an upward trend for years now. The market is expected to continue to grow until 2050. The demand far outstrips supply and there is a huge gap to be filled. In India, there is about 1.4 GW of module manufacturing capacity and this is expected to increase in the future since the solar PV segment is one part of the entire value chain where the barriers to entry is relatively low. Thus, as an entrepreneur, solar module production offers an exciting opportunity to you. Few Indian Major Players are as under • Central Electronics Ltd. • Environ Energy-Tech Services Ltd. • Epic Energy Ltd. • Euro Multivision Ltd. • H B L Power Systems Ltd. • Helios Photo Voltaic Ltd. • I T I Ltd. • Indosolar Ltd. • J S W Green Energy Ltd. • Jupiter Solar Power Ltd. • N E P C India Ltd. • P L G Power Ltd. • Pentafour Solec Technology Ltd. • Photon Energy Systems Ltd. • Rajasthan Electronics & Instruments Ltd. • Reliance Industries Ltd. • Renewable Energy Systems Ltd. • Res Photovoltaics Ltd. • Shurjo Energy Pvt. Ltd. • Surana Ventures Ltd. • Tata Power Solar Systems Ltd. • Titan Energy Systems Ltd. • Udhaya Semiconductors Ltd. • Ujaas Energy Ltd. • Usha (India) Ltd. • Websol Energy System Ltd. • X L Energy Ltd.
Plant capacity: Solar Panel 5MW/AnnumPlant & machinery: Rs 109 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 450 Lakhs
Return: 25.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Bare Conductors - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A wire or combination or wires not insulated from one another, suitable for carrying a single electric current is called conductor. The term conductor is not to include a combination of conductors insulated from one another, which would be suitable for carrying several different electric currents. Aluminium is a metal characterized by high resistance to corrosion, good electrical and thermal conductivity, and a density which is about one-third or less that of steel, copper, or nickel. Aluminium can be used as a power conductor, or for wire and cable shielding. Aluminium provides a lower weight to current-carrying ratio compared to copper. Aluminium has a lower tensile strength than copper, but approaches that of copper for the equivalent ampacity. When terminated with appropriate plating, hardware and processes as stipulated by the governing standards, Aluminium bussing, wiring and terminations prove to be as reliable as copper. Finally, the choice of Aluminium conductors can provide a significant cost savings. Aluminium and aluminium alloy conductors are the preferred and dominant conductors in several areas of power distribution. The major areas dominated by aluminium and aluminium alloy conductors are non-insulated overhead power transmission, insulated overhead power transmission and non overhead power distribution. Aluminium and aluminium alloy conductors offer good conductivity, light weight, excellent resistance to corrosion, good bending properties, greater tensile strength than copper and excellent compatibility with most common insulation used by the wire and cable industry. During 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Apar Industries Ltd. • Bagade India Engg. Ltd. • Bindawala Cables & Conductors Ltd. • Deepak Cables (India) Ltd. • E M C Ltd. • Eri-Tech Ltd. • Galada Power & Telecommunication Ltd. • Hirakud Industrial Works Ltd. • Jaipur Metals & Electricals Ltd. • Lunkad Aluminium Ltd. • Maharashtra Metal Powders Ltd. • Murarka Cables & Conductors Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Shashi Cables Ltd. • Smita Conductors Pvt. Ltd. • Traco Cable Co. Ltd. • Vidarbha Winding Wires Ltd.
Plant capacity: • All Aluminium Alloy Conductor: 10 MT/Day, Aluminium Conductor Steel Reinforced : 10 MT/DayPlant & machinery: Rs 580 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1141 Lakhs
Return: 27.36%Break even: 56.24%
Add to Inquiry Add to Inquiry Basket

PVC Wire & Cables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The generation, transmission, and distribution of power involve electrical facilities, apparatus, and components, to carry the electrical energy from its generating site to where it is utilized. An important part of this power system is the cable system that is used exclusively to carry power from the main substations to secondary substations at load centers. Low-voltage cable is used to distribute power from the load centers to utilization equipment in conduits and ducts, even though other methods such as cable trays, direct burial for outdoor applications, and aerial cable are used. Electrical, mechanical, and environmental considerations are the main factors in selecting and applying cable systems for distribution and utilization of electrical power. Cables are the source of carrying power and signal in power plants, refineries, process industries. Cable network can carry fire from one place to another in the event of fire caused due to external sources or due to short circuit. Power cable industry in India is eyeing an estimated Rs 50 bn market to unfold. About 78,000 MW of power generation capacity and 60,000 circuit km of transmission network are projected to be added by 2012 according to the Eleventh Five Year Plan. Capex required for every MW of power generating capacity is about Rs 40 mn. Expenditure required in the Eleventh Five Year Plan for power generation has been estimated at Rs 270 bn. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bindawala Cables & Conductors Ltd. • Gem Cables & Conductors Ltd. • I L A C Ltd. • Industrial Cables (India) Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Sanco Industries Ltd. • Skytone Electricals (India) Ltd. • Torrent Cables Ltd. • Universal Cables Ltd. • Vimal Flexsol Ltd.
Plant capacity: Single Core Wires (THHN/THWN)465 KM/Day •Single Core Stranded (CU/PVC)350 KM/Day •Multiple-Core Flexible-Wire (Sheathed) 164 KM/DayPlant & machinery: Rs 225 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1034 Lakhs
Return: 30.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Single Core Flexible Cable (FR LSF PVC Insulated) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunity

PVC compound insulated single core and multi core flexible cables have a wide range of application in machine tools, appliances, control panels, machinery and industries of every nature. The conductors, drawn from 99.97% bright electrolytic grade copper with more than 100% conductivity, are annealed and bunched together. The conductors are insulated with a PVC compound with high insulation resistance and dielectric strength, formulated and manufactured in-house. In case of multicore cables, the insulated cores are laid up to form the core assembly. The inner cores are coded for ease of identification as per National/ International coding practices. The sheathing is provided with a specially formulated PVC compound to facilitate not only ease in stripping but also to withstand mechanical abrasion while in use. These PVC compounds used for insulation and sheathing have a high oxygen and temperature index. These properties help in restricting the spread of fire even at very high temperatures. The single core and multicore sheathed cables are manufactured as per IS 694: 1990, in sizes from 0.5 sq. mm. to 50sq. mm. in single core, and in sizes 0.5 sq.mm. to 4.0 sq mm. upto 5 cores. These sizes carry the prestigious ISI mark and are duly approved by FIA/TAC. The rest of the sizes generally conform to IS 694: 1990. Few Indian Major Players are as under • Bindawala Cables & Conductors Ltd. • Finolex Cables Ltd. • Gem Cables & Conductors Ltd. • Omega Cables Ltd. • Sanco Industries Ltd. • Skytone Electricals (India) Ltd. • Torrent Cables Ltd. • Torrent Cables Ltd. • Uniflex Cables Ltd. • Universal Cables Ltd. • Vimal Flexsol Ltd. • Vora Wires Inds. (India) Ltd.
Plant capacity: 500 Coils/DayPlant & machinery: Rs 63 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 325 Lakhs
Return: 27.14%Break even: 57.75%
Add to Inquiry Add to Inquiry Basket

Distribution Transformer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A distribution transformer is a transformer that provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in the distribution lines to the level used by the customer. If mounted on a utility pole, they are called pole-mount transformers (or colloquially a pole pig). If the distribution lines are located underground, distribution transformers are mounted on concrete pads and locked in steel cases, thus known as pad-mount transformers. Because of weight restrictions transformers for pole mounting are only built for primary voltages under 30 KV. The transformers is a device that transfers electricity or energy from one electric circuit to another without change of frequency and usually, but not always, with a change in voltage. In India the role of transformers assumes an added significance since in most of the states; electric supplies are not only erratic but are also characterized by wide variations in frequencies or voltages. These causes enormous damage to the electrical appliance like refrigerators, television and other industrial machinery engaged in the production of commodities. The transformer industry with the help of innovative methods, upgradation in technology etc., will have to manufacture transformers which offer maximum functional efficiency and are at the same time less hazardous or dangerous and economically viable. With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active. The industry, as a consequence, needs strategic alliances and tie-ups with technology suppliers to upgrade their supplies. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Accurate Transformers Ltd. • Andrew Yule & Co. Ltd. • Apex Electricals Ltd. • Crompton Greaves Ltd. • I M P Powers Ltd. • Indo Tech Transformers Ltd. • Kerala Electricals & Allied Engg. Co. Ltd. • Kirloskar Electric Co. Ltd. • Rams Transformers Ltd. • Shilchar Technologies Ltd. • Star Delta Transformers Ltd. • Tarapur Transformers Ltd. • Tesla Transformers Ltd. • Transformers & Rectifiers (India) Ltd. • Ujaas Energy Ltd. • Victory Electricals Ltd. • Victory Transformers & Switchgears Ltd.
Plant capacity: 2000 Nos./AnnumPlant & machinery: Rs 44 Lakhs
Working capital: -T.C.I: Cost of Project:eRs 391 Lakhs
Return: 28.00%Break even: 67.00%
Add to Inquiry Add to Inquiry Basket

SOLAR PANEL- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Solar Panels are in general Silicon made Rectangular Shaped Glass Covered Products which Produce Electricity when exposed to the Sun. These Panels produce Direct Current (DC) Electricity which has to be converted by a Solar Invertr to Alternating Current (AC) Electricity to be used by Consumers. . Solar Panel produced Electricity usually costs between Rs 15-18 /KwH (much higher than the Rs 3-6/unit paid normally) which makes it uneconomical except in special cases like off grid applications. Replacing expensive Diesel powered Telecom Towers with Solar Panels is also an option. Sharply falling Solar Panel costs should make it competitive with your electricity in 2-3 years. In places like Italy, Solar Electricity is already competitive due to high prices of electricity. Conversion of light energy in electrical energy is based on a phenomenon called photovoltaic effect. Silicon is the most widely used semiconductor material for constructing photovoltaic cell. When semiconductor materials are exposed to light, the some of the photons of light ray are absorbed by the semiconductor crystal which causes significant number of free electrons in the crystal. This is the basic reason of producing electricity due to photovoltaic effect. The heart of the solar energy generation system is the Solar cell. It consists of three major elements, namely:- the semiconductor material, junction formed within the semiconductor, the contacts on the front and back of the cell that allow the current to flow to the external circuit. Uses and Application of photovoltaic are in agriculture, industry, telecommunication and public services. Solar power is attractive because it is abundant and offers a solution to fossil fuel emissions and global climate change. Earth receives solar energy at the rate of approximately 1,73,000 TW. In terms of all renewable energy, currently India is ranked fifth in the world with 15,691.4 MW grid-connected and 367.9 MW off-grid renewable energy based power capacity. India is among top 5 destinations worldwide for solar energy development as per Ernst & Young’s renewable energy attractiveness index. As a whole there is a good scope for entrepreneurs for investment.
Plant capacity: Solar PV Module (240 watt) : 350 Nos/day (25 MW)Plant & machinery: Rs 278 Lakhs
Working capital: -T.C.I: Cost of project: Rs 852 Lakhs
Return: 29.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Prestressed Concrete Cement Poles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

For many years throughout the world, poles made of wood, steel, and concrete have been used to support power transmission, telephone and telegraph lines, street lighting, overhead power lines for railroads, and antenna masts. Concrete poles were first used over 60 years ago and were then made of normal reinforced concrete. As technology improved, production and use of concrete poles gradually increased. Prestressed concrete poles (PSC Poles) are highly durable and strong. PSC Poles are fabricated from excellent quality concrete material. These poles are used extensively in electrical industry, for establishing electrical connections and fittings. The poles are ecofriendly and require very low maintenance. The PSC poles have consistent material properties throughout their length. PSC poles are not susceptible to rot and decay. The PSC pole has the same strength throughout its service life. PSC poles are not susceptible to insect and animal attack. Furnish and install prestressed concrete poles for services pole applications, luminaire support, and strain poles for span wire support of traffic signals, signs, and other devices. And often support wires and other components for many utilities such as electric power, telecommunications, cable television, and fiber optic. The demand for Prestressed (Pre-cast/Reinforced) concrete-cement (PCC) poles directly depends on the growth of electric power sector. The growth in generation and suppy of electric energy gives rise to demands for PCC poles & other systems by way of OEM & replacement/renovation demands. A large network of electricity distribution for rural electrifications, agricultural & irrigational consumptions can be catered to only by establishing an efficient generation & distribution standards. All these factors are essentially going to raise the demand for not only electrical equipments but also distribution materials including poles.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Arvind Kumar Nand Kumar Ltd. • Ashoka Pre-Con Pvt. Ltd. • Concrete Udyog Ltd. • Genus Power Infrastructures Ltd. • Sainik Finance &Inds. Ltd. • Shri KrsnaUrja Project Pvt. Ltd.
Plant capacity: 200 Nos/dayPlant & machinery: 303 lakhs
Working capital: -T.C.I: Cost of Project: 1401 lakhs
Return: 26.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

Repair & Refurbishment of Power Transformers

Transformer is a machine that transfers electrical energy from one electrical circuit to another without changing frequency by the principle of electromagnetic induction. Since its basic construction requires no moving parts so it is often called the static transformer and it is very rugged machine requiring the minimum amount of repair and maintenance. The term is used to include all transformers of large sizes (250kva and above) used in generating stations and substations for transforming the voltage at each end of a power transmission line. They may be single or three phase and voltage rating of220/11kv or in high voltage range.They are kept in operation all the 24 hours a day. In such transformer iron loss occur for all the time where copper loss occur only when they are loaded. Electric equipment industry contributes over 2% of GDP which is projected to increase to about 12% in last year. During the period, consumption of electrical equipment is estimated to increase from over USD 28 bn now to USD 363 bn, growing at a CAGR of about 30%. The electrical equipment and accessories industry, with its highly diversified content, may be broadly segmented into (i) generation equipment, (ii) transmission equipment, and (iii) distribution equipment. According to the Power Ministry, the power sector has tied up Rs. 2,240 bn worth of investments to build power plants with 70,000 MW capacity in the next three years.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Vijay Electricals • BHEL • EMCO • Indo Tech Transformers • Kirlosker Electric Co., • Kanohar Electricals
Plant capacity: Repairs of 25 MVA Power Transformers : 60 Nos/Annum Repairs of 50 MVA Power Transformers: 36 Nos/Annum Repairs of 100 MVA Power Transformers: 12 Nos/Annum Refurbishment of 25 MVA Power Transformers : 60 Nos/Annum Refurbishment of 50 MVA Power TransformersPlant & machinery: Rs 33 lakhs
Working capital: -T.C.I: Cost of Project: Rs 200 lakhs
Return: 26.00%Break even: 65.00%
Add to Inquiry Add to Inquiry Basket

Insulator(HT & LT)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Electricity play a vital role in the development and growth of Agriculture and Industry, as it is a high priority item for all the developing or developed nations. For the generation and distribution of Electricity, High Tension Insulators are an important adjusts. Insulators have very few free electrons and do not transfer electrical energy well. An electrical insulator is a material whose internal electric charges do not flow freely, and therefore make it nearly impossible to conduct an electric current under the influence of an electric field. This contrasts with other materials, semiconductors and conductors, which conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors. The end type insulator is used on all distribution lines and on low voltage transmission lines. World is experiencing a tremendous expansion of industrial and real estate sectors and accompanied by a massive increase in the need for electric power energy due to the essential role of the electric power in the development and growth in all areas of life. This huge demand of the electrical power bodes market demand for large investments in the field of electric power and its support services industry. Global demand for insulation is expected to rise 3.7 percent per year to 26.0 billion square meters of R-1 value in 2020. Developing countries are expected to account for the majority of insulation demand gains, with rising building construction activity and industrial output driving growth. Few Indian Major Players are as under • Aditya Birla Insulators • Spark Insulators Pvt Ltd • Prime Insulators Pvt. Ltd • Cji Porcelain Pvt Ltd • Shreeji Power & Insulators Pvt. Ltd
Plant capacity: 3,500MT/AnnumPlant & machinery: 107 lakhs
Working capital: -T.C.I: Cost of Project: Rs 691lakhs
Return: 27.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

E-Waste Recycling Plant

Electronic wastes, e-waste, e-scrap, or Waste Electrical and Electronic Equipment (WEEE) is a description of surplus, obsolete, broken or discarded electrical or electronic devices.The perception of e-waste is often restricted to a narrower sense, comprising mainly of end-of-life information- & telecommunication equipment and consumer electronics. However, technically, electronic waste is only a subset of WEEE (Waste Electrical and Electronic Equipment). The rising levels of e-waste generation in India have been a matter of concern in recent years. With more than 100 crore mobile phones in circulation, nearly 25 per cent end up in e-waste annually.India has surely emerged as the second largest mobile market with 1.03 billion subscribers, but also the fifth largest producer of e-waste in the world, discarding roughly 18.5 lakh metric tonnes of electronic waste each year, with telecom equipment alone accounting for 12 per cent of the e-waste A range of techniques is currently applied for retrieving components and materials from WEEE. The essential features of these systems generally conform to a scheme of: sorting/disassembly; size reduction; separation.In addition, the new product launches with updated features and additional services are attracting the customers to upgrade their old products with new products. This has reduced the life span of these devices to about 3-4 years. Thus, this is adding more and more e-waste at a tremendous rate.This is ultimately leading to increased activities for managing e-waste, which would create conducive environment for e-waste management in the coming years.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • M/s Ramky E- Waste Recycling • ECS Environment Ltd • Pruthavi E-Recycle Pvt. Ltd. • M/s. A2Z E-Waste Management ltd., • M/s. R. K. Enterprises (P) Ltd., • M/s. TES-AMM Indian Pvt. Ltd., • M/s Greenscape Eco Management Pvt • TES AMM Private Limited
Plant capacity: Copper Wire: 500mt/annum Plastic Granules: 2230mt/annum Glass: 970mt/annum Ferrous Metal: 800mt/annum Monitors (Repair): 3000mt/annumPlant & machinery: Rs 132 lakhs
Working capital: -T.C.I: Cost of Project: Rs 518 lakhs
Return: 27.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 8 of 17 | Total 164 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top