Google Search

Search

Already a Member ?

Best Business Opportunities in Assam - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Food processing: Project Opportunities in Assam

 

Profile

Food processing is the set of methods and techniques used to transform raw ingredients into food or to transform food into other forms for consumption by humans or animals either in the home or by the food processing industry. Food processing typically takes clean, harvested crops or butchered animal products and uses these to produce attractive, marketable and often long shelf-life food products. Assam has many agricultural and horticultural products. Assam has a fertile soil conducive to cultivation of fruits and vegetables. So far the fruits and vegetables grown in Assam have been sent by rail or road to other parts of the country, which can be used for processing many kinds of food. Apart from rice mills, flour mills and oil mills, many small establishments of producing biscuits, lozenges, soft drinks and snacks have recently come in the town and commercial centres of the region.

The food processing sector has the potential to grow in Assam with increasing demand for processed food. Opportunities exist in processing, sourcing, setting up cold chains and logistics. The Government of India has approved for setting up a Food Processing Industrial Park at Chaygaon near Guwahati in Kamrup District.

 

Resources

Assam has an abundance of natural resources which are yet to be engaged industriously. The agro-climatic condition of the State favour the growth of a variety of fruits and vegetables/ spices including orange, banana, pineapple, arecanut, coconut, guava, mango, jackfruit, citrus fruits, ginger, turmeric, chillies, potatoes, etc. Until recently, horticulture was practiced as a largely non-commercial activity. However, with better quality planting material, sufficient research support and better know-how, the State could easily be poised for a major boom in the fruit growing and food processing industry. Following are key potential industries to be developed on the core strengths of our state:

•    Multi cropping in agriculture sector

•    Assam is the world’s single largest tea growing region

•    Abundant resource of fresh water,

•    Major varieties of the major fruits grown in Assam are Banana, orange, litchi, pineapple, papaya

•    Assam has abundant productive and diversified water resources to support surplus fish production to feel the growing fish eating population of the state.

•    Livestock is an important component of mixed farming system in Assam as the meat consumption in Assam is high.

The per capita availability of milk is 70gm/day in comparison to the all India figure of 246gm/day.

 

Government policies/ scheme

To fulfil the need for creation of integrated and holistic infrastructure for food processing sector, Ministry of Food Processing Industries (MOFPI) had launched new Schemes in 11th FYP with strong focus on creation of modern enabling infrastructure to facilitate growth of food processing and creation of an integrated cold chain mechanism for handling perishable produce. Under the initiatives of MOFPI for strengthening infrastructure in agro  and food processing sector, it had launched the Mega Food Parks Scheme, Scheme for Cold Chain, Value Addition and Preservation Infrastructure and Scheme for Modernization of Abattoirs in the 11th  Five Year Plan. The Government of India has sanctioned a food processing park with a total project cost of Rs. 5.95 crores. The park is being set up near Chaygaon in the district of Kamrup (rural). The implementing agency for the food processing is Assam Small Industries Development Corporation Ltd.

 

 

 

Medicinal plants: Project Opportunities in Assam

 

Profile

Medicinal plants are various plants used in herbalism and thought by some to have medicinal properties. Medical Plant constitutes an important therapeutic aid in alleviating ailments. Almost 80% of the world population, particularly in the third world are fully dependent on medicinal plants for meeting their health care needs. The herbal medicines today symbolize safety in contrast to the synthetics that are regarded as unsafe to human and environment. In the primeval times, the Indian sagacious held the view that herbal medicines are the only resolution to treat numeral health related problems and diseases. It is becoming more main stream as improvements in analysis and quality control along with advances in clinical research show the value of herbal medicine in the treating and preventing disease. Increasing interest in herbal products has today accelerated the growth of medicinal plant-based industries.

 

Resources

Assam is primarily an agrarian economy, with 74% of its population engaged in agriculture and allied activities. There are over 1500 species of medicinal plants reported so far from India and more than 350 species from Assam. They can not only cure our ailments but can also be a potential source of economic development. Assam with a total geographical area of 78438 sq. km is very rich in land resources. Its vast fertile alluvial tracts and low hills with suitable climatic condition offer excellent condition for utilization of for different uses. Assam is basically an agriculture dependent state. More than 65 per cent of its total area is under agriculture.

Government policies

The provisions of this Environment code of practice (ECP) - Agriculture, comply with the legal requirements and conventions, which govern the collection, cultivation processing, handling, packaging & storage of medicinal plant or its derivatives. Prior to selection of species, the cultivator shall apply for and obtain permission from State Medicinal Plants Boards (SMPB), Government of Assam and National Horticulture Board (NHB). The proof of obtaining clearance shall be a pre-requisite for inclusion as beneficiary in the project. The District Agriculture Officer (DAO) shall be responsible for verification of the same. 

Mineral: Project Opportunities in Assam

Profile

A mineral is a naturally occurring solid chemical substance formed through biogeochemical processes, having characteristic chemical composition, highly ordered atomic structure, and specific physical properties. Common rocks are often made up of crystals of several kinds of minerals. There are some substances, like opal, which have the appearance of a mineral but lack any definite internal structure, are sometimes called "mineraloids". The minerals produced in India constitute one-quarter of the world's most popular mineral resources.

Resources

Assam is endowed with vast mineral resources. Assam is rich in mineral resources like Coal (320 Mn.T.), Limestone (703 Mn.T.), Iron Ore (11 Mn.T) and Granite (1 Bn. Cu. Mtrs) along many more resources like Fireclay, Lithomarge, Fuller's Earth, Sillimanite and Glass Sand. The coal found in Assam has a high sulphur content and high volatile matter content, thereby reducing its coke ability. The most important minerals being exploited so far in Assam are coal, oil and gas, limestone and sillimanite. Limestone with reserves of about 500 million tonnes is another important resource and is available in various grades. The China clay available in the Karbi-Anglong district is a vital input for the ceramics industry and has already spawned a few small plants. Deposits of decorative stone like granite estimated to be more than a billion cubic meters are available in various shades and colours, which have a huge market potential locally and abroad. Opportunities based on minerals are Gasification & Liquefaction of Coal, De-Sulphurisation of Coal, Coal based Power Plant, Coal Bed Methane (CBM) Extraction, Exploration of Oil & Natural Gas and HDPE / LLDPE / Polypropylene basedindustries. Assam has an abundant reserve of petroleum. It takes care of 25% of India's petrol requirement.

Government policies

The  role to be played by the Central and State Governments in  regard  to  mineral  development has  been  extensively  dealt in  the  Mines  and Minerals (Development and Regulation)  Act, 1957  and Rules  made under the Act by  the  Central  Government and  the  State  Governments in their  respective  domains.   The provisions  of  the  Act  and the Rules  will  be  reviewed  and  harmonised  with  the basic features of the new  National Mineral  Policy.  In future the core functions of the State in mining will be facilitation and regulation of exploration and mining activities of investors and entrepreneurs, provision of infrastructure and tax collection.  In mining activities, there shall be arms length distance between State agencies (Public Sector Undertakings) that mine and those that regulate.  There shall be transparency and fair play in the reservation of ore bodies to State agencies on such areas where private players are not holding or have not applied for exploration or mining, unless security considerations or specific public interests are involved. Recently, the Union Government after reviewing the current mining sector, mineral development and keeping in view the availability of the valuable finite resource have announced the National Mineral Policy (NMP))- 2010. Research organisations, including the National Mineral Processing Laboratories of the Indian Bureau of Mines should be strengthened for development of processes for beneficiation and mineral and elemental analysis of ores and ore dressing products. There shall be co-operation between and co-ordination among all organisations in public and private sector engaged in this task.

 

Oil refinery and its products: Project Opportunities in Assam

 

Profile

An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as gasoline, diesel fuel, asphalt base, heating oil, kerosene, and liquefied petroleum gas. Indian Oil group of companies owns and operates 10 out of India’s 20 refineries with a combined refining capacity of 65.7 million metric tonnes per annum (MMTPA, .i.e. 1.30 million barrels per day approx.). Indian Oil and its subsidiaries account for 47% petroleum products market share. The companydistributes its products directly to bulk customers and to retail customers via a network of retail outlets and dealers/distributors. The Indian oil and gas sector is one of the six core industries in India and has very significant forward linkages with the entire economy. Oil and Natural Gas Corporation Limited (ONGC) and Oil India Ltd. (OIL) are the two National Oil Companies (NOC)s.

Resources

Assam has the oldest refinery in the country which started commercial production in 1901. Assam was the first state in the country where in 1889 oil was struck at Digboi in Tinsukia district. The refinery, now belonging to the Assam Division of the Indian Oil Corporation, has a refining capacity of 3 lakh tonnes of petrol, kerosene, diesel and other petroleum products.         

The second refinery in Assam was set up at Noonmati in Guwahati under the public sector. It started production in 1962. It produces liquified petroleum gas (LPG), petrol, kerosene, diesel, furnace oil, coke etc. The third refinery in the region was established at Dhaligoan near Bongaigaon in 1962. It is known as Bongaigaon Refinery and Petro-Chemicals Limited (BRPL).  The fourth refinery in the state was established at Numaligarh of Golaghat district in 1999, with a refining capacity of 3 million tonnes of oil and other products.

Government policies

The oil ministry has empowered state-run exploration firms ONGC and Oil India to choose customers for gas produced from small fields where output is less than 0.1 million standard cubic meters per day, which would reduce bureaucratic delays and help companies generate revenue expeditiously. Oil India Limited (OIL), a Government of India Enterprise, under the administrative set-up of Ministry of Petroleum and Natural Gas, is engaged in the business of exploration, production and transportation of crude oil and natural gas. The growing demand for crude oil and gas in the country and policy initiative of Government of India towards increased E&P  activity, have given a great impetus to the Indian E&P industry raising hopes of increased exploration. The government in order to increase exploration activity approved the New Exploration Licensing Policy (NELP) in March 1997 which would level the playing field in the upstream sector between private and public sector companies in all fiscal, financial and contractual matters. There will be no mandatory state participation through ONGC/OIL nor there did any carry interest of the government.  

 

 

 

Tea: Project Opportunities in Assam

 

Profile

 

Tea is indigenous to India and is an area where the country can take a lot of pride. This is mainly because of its pre-eminence as a foreign exchange earner and its contributions to the country's GNP. In all aspects of tea production, consumption and export, India has emerged to be the world leader, mainly because it accounts for 31% of global production. It is perhaps the only industry where India has retained its leadership over the last 150 years. Tea production in India has a very interesting history to it. The range of tea offered by India - from the original Orthodox to CTC and Green Tea, from the aroma and flavour of Darjeeling Tea to the strong Assam and Nilgiri Tea- remains unparalleled in the world.

 

Resources

 

Assam is the largest producer of tea in India. Assam tea is well known for its distinct quality, especially for its strong liquor, rich taste and colour. Of the agriculture-based industries, tea occupies an important place in Assam. In Assam, tea is grown both in the Brahmaputra and Barak plains. Tinsukia, Dibrugarh, Sibsagar, Jorhat, Golaghat, Nagaon and Sonitpur are the districts where tea gardens are mostly found. Assam produces 51% of the tea produced in India and about 1/6th of thetea produced in the world. In 1970, the Guwahati Tea Auction Centre was established for better marketing of the tea produced in the region. This is the world's largest CTC tea auction centre and the world's secondlargest in terms of total tea. It now auctions more than 150 million kg of tea valued at more than Rs 550.00 crores annually. Tea industry has contributed substantially to the economy of Assam. About 17 percent of the workers of Assam are engaged in the tea industry.

Government policies

 

The Government of India has created a Special Purpose Tea Fund (SPTF) which is meant for rejuvenation of tea bushes. This will benefit about 700-800 tea gardens of the state. In an important policy decision – the Government has decided to secure a geographical indication for the tea produced in the state. ‘Assam Tea’ will be known as ‘Assam Orthodox Tea’ once the geographical indication is secured, thus making it an exclusive commodity and raising its stakes in the global market.

 

Plastic: Project Opportunities in Assam

 

Profile

Plastics are the most rapidly growing sector of the materials industry. The material is gaining notable importance in different spheres of activity and the per capita consumption is increasing at a fast pace. Continuous advancements and developments in polymer technology, processing machineries, expertise and cost effective manufacturing is fast replacing the typical materials in different segments with plastics.  Plastics play a very important role in our daily lives. Throughout the world the demand for plastic, particularly plastic packaging, continues to rapidly grow. India's plastics processing sector will grow from 69,000 machines to 150,000 machines by the year 2020. India's demand for plastics in irrigation alone is pegged to cross 2.5 million tonnes by 2015. Indian automobile industry is growing at more than 18% p.a. and is hungry for plastics. The plastics processing industry is a source of great potential for global businesses.

Resources

With the Assam Gas Cracker Project, also known as the Brahmaputra Crackers and Polymers Ltd (BCPL), due to come up by 2012, the Assam government has put its focus on promoting and attracting plastic-based downstream industries. For the state, coming up of downstream industries in large numbers as a result of the Gas Cracker Project would not only bring in large amount of investments, but would generate huge employment opportunities.

Government policies

The government has acquired 1,500 bighas of land in Tinsukia in upper Assam for setting up a plastic park, which would be the first in North-East. Bordoloi told Business Standard that the government would form a special purpose vehicle (SPV) in association with private players to implement the plastic park. He added that the SPV will be formed in two to three months. The government has already released Rs 10 crore for the park.

 

 

Power: Project Opportunities in Assam

 

Profile

The power industry is responsible for the production and delivery of electrical energy in sufficient quantities via a power grid. Given the demand for electricity is uniform across all domestic, industrial and commercial operations, power is viewed as a public utility and basic infrastructure. The electrical power industry is commonly split up into four processes, namely, electricity generation (e.g. power station), electric power transmission, electricity distribution and electricity retailing. In many countries, electric power companies own the whole infrastructure from generating stations to transmission and distribution infrastructure. For this reason, electric power is viewed as a natural monopoly and is thus heavily regulated.

Resources

Assam has made much improvement in power generation. It has a number of coal based thermal plants to produce electric power. There is no dearth of coal mines in the state. This ensures that the supply of coal to these plants is uninterrupted. In recent years, several thermal power plants in Assam are in operation. These have tackled most of the earlier problems. The Assam thermal plants are aiming to generate enough electricity for the entire state. Some of the major Assam power plants are: Namrup Thermal Power Station (NTPS).It is managed by the Assam State Electricity Board (ASEB). It has a power generation capacity of 134MW. The NTPC (National Thermal Power Corporation) is investing more money in thermal power generation in Assam. Some of the upcoming Assam thermal power plants are Assam Power Generation Company Ltd., The existing Assam Thermal Power Plants are being expanded to help in the production of more electric energy.

Government policies

The Government is committed to ensure uninterrupted quality power supply by way of dedicated feeders from Grid Substation of Power distribution companies to all the Industrial Estates/Parks. Private Industrial Estates will be allowed to install Captive Power Plant to generate and distribute within such Industrial Estates/ Parks subject to provision of the Electricity Act, 2003 and rules there under. At the same time the State would encourage Private Power Generators to set up Power Plants. Assam is poised to have surplus quality power in the near future through the National Power Grid which is in advanced stage of implementation. Power sector in Assam has received the assistance from Asian Development Bank. Investment has been made in the sub-transmission and distribution sector. Power supply to Assam is ensured from Central Generating Stations owned by Corporations under the Government of India.

 

 

Cottage industry: Project Opportunities in Assam

Profile

A cottage is a farmhouse usually in rural areas. A cottage industry is a small self-help industry that is carried out in the home, community centre, parish hall or some other convenient place. Such industries are evident in handicrafts, catering, tailoring, dressmaking, beauty culture, retailing of dry goods, pottery and furniture making on a small scale. Cottage industries developed mainly out of the need for an additional source of income, because of the need to use one's spare time gainfully and because of the relative ease of acquiring the necessary raw materials to set up such industries.

Resources

Assam was traditionally famous for its cottage industry, especially spinning and weaving. Pat or pure silk production is essentially confined to Assam. Assam produces about 10% of total natural silk of India. Assam also produces Muga, the golden silk. Assam is also the main producer of Eri or Endi. Weaving is an important cottage industry of Assam. It is a traditional industry which can be traced back to very ancient times. There are about 7,00,000 looms in Assam, where majority are primitive foot looms. Only some looms of Sualkuchi, used for commercial production of silk cloth, are powered. Bell-metal work is a traditional cottage industry of Assam. The products made of bell-metal are traditional plates, cups, tumblers, pitchers, bowls, Sarai (a tray with a stand), dwarf pitchers, pots, hookahs and musical instruments. Brass-work is also an important traditional handicraft of Assam. Brass articles are produced not only for day-to-day use, but also for interior decoration. The total production of marketable finished goods annually is about300 tonnes.

Government policies

The Assam Preferential Stores Purchase Act, 1989 (to replace the Assam Preferential Stores Purchase Rules, 1972) enactment is aimed to encourage growth of industries in the State and to implement the Industrial Policy announced and published by the Govt. of Assam vide Notification No. CL 586/85 dated 24th December, 1986. Objectives of this enactment is to encourage small scale and cottage industries by preferential purchase of their products, to rationalize the procedure for purchase of stores required by the State Government, companies and undertakings, Small Industries, Khadi and Cottage industries registered under this Act shall be exempted from payment of earnest money and security deposit for items in respect of which the units are registered.

 

Tourism: Project Opportunities in Assam

Profile

Tourism has become an important industry in many countries of the world, both in the east and the west. Various initiatives are being taken by the Government and other organizations to promote tourism here.

Resources

Every year the number of visitors to Assam has been steadily increasing. The state has unparalleled tourist attractions like wildlife sanctuaries, adventure tourism, eco-tourism, hill stations, lakes and places of historical heritage. There are five national parks; Kaziranga, Manas, Nameri, Dibru- saikhowa, Orang and fifteen wildlife sanctuaries in Assam named; Gibbon, Garampani, Burachapari, Bornadi, Sonai-Rupai, Pobitora, Panidehing, Bherjan, Nambor, North-karbi-anglong, East-karbi-anglong, Laokhowa, Charkarasila, Marat-Longri, Nabbor-Doigurang, Borail and Amchang. The famous species of one horned rhino is found only in Assam. It has many Golf Fields and offers a huge potential in sports tourism. Assam's natural landscape, lush green forests, wild life sanctuaries, pilgrimage spots and tea gardens offer a wide choice to cater to the tastes of a variety of tourists from the casual sightseer to the adventure tourist. With the withdrawal of the Restricted Area Permit (RAP), tourism is poised for a major boom. 

 

Government policies

The Government of Assam came up with the Assam Tourism Policy2008 with the following objectives:

•        To place tourism sector on a high priority in the economic development of the state.

•        To harness tourism potentials to make it environmentally sustainable, socially culturally enriching and economically beneficial.

•        To create awareness and evolve suitable institution arrangement for effective participation of the people.

•        To improve quality of the existing tourism products.

•        To promote infrastructure of international standard.

•        To devise long term human resource development strategy.

•        Encourage Public-Private Partnership in tourism development.

The Assam Tourism Policy, 2008 has added to the enthusiasm amongst the entrepreneurs and has also attracted big players like Indian hotels Company Ltd (Taj group) to set up a 5 star hotel in Guwahati. Many more such projects are in the pipeline. Guwahati airport has emerged as one of the busiest airports in the country with almost all domestic airlines connecting Guwahati and other airports of the state virtually to most of the major metros of the country.

 

Agriculture: Project Opportunities in Assam

 

Profile

While most other states in India are gradually moving away from their traditional agriculture-based economy toward industry or service-oriented economy, Assam is still heavily dependent on the agricultural sector. Today, India ranks second worldwide in farm output. Agriculture and allied sectors like forestry and fisheries accounted for 16.6% of the GDP in 2009, about 50% of the total workforce. The economic contribution of agriculture to India's GDP is steadily declining with the country's broad-based economic growth. Still, agriculture is demographically the broadest economic sector and plays a significant role in the overall socio-economic fabric of India.

Resources

Assam Agriculture is the primary sector in the state's economy. The socio-economic condition of Assam largely depends on its agricultural production.  Assam produces both food and cash crops. The principal food crops produced in the state are rice (paddy), maize (corn), pulses, potato, wheat, etc., while the principal cash crops are tea, jute, oilseeds, sugarcane, cotton, and tobacco. Although rice is the most important and staple crop of Assam, its productivity over the years has not increased while other crops have seen a slight rise in both productivity and land acreage.

Government policies

The Government of Assam in consonance with    the       National Agriculture Policy laid down few policy objectives in the Agriculture Sector. Those include:

·         The Agriculture and allied sector grows at the rate of 4 p.c. per annum for the next decade to provide food security and to improve the nutritional intake of the people of the State as well as significantly decrease the population below the poverty line.

·         To increase the productivity of all major crops, particularly that of rice, wheat, pulses and oil seeds.

·         To increase the cropping intensity in the sector through increase in irrigation facilities as well as giving a boost to mechanization in the State, to make it at par with the rest of the country by the end of the 10th plan.

·         To diversify into other crops, specially wheat, oilseeds, and partly pulses, as well as improve production of horticultural crops.

·         As the bulk of the population in the State lives in the rural area and most of the people are dependent on Agriculture and allied sectors for their livelihood, the Government sees this sector as the engine for growth of the economy in the long run and wishes to treat the Agriculture Sector as an area of maximum employment generation in the State.

·         Since the resources at the disposal of the State are limited, the endeavour will be to converge the resources available under various Government schemes like SGSY and PMGSY etc. to ensure that funds are spent keeping in view the long term growth of the Agriculture and Allied Sector in the State.

 

Waste management: Project Opportunities in Assam

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

The Guwahati City generates over 300 MT of Municipal Solid Waste (MSW) on a daily basis and has almost 639 Kms street length. Guwahati Municipal Corporation (GMC), which provides municipal services to 8.2 Lakhs citizens of Guwahati city, is desirous to select a suitable developer/ private operator to establish a viable & environmentally sustainable integrated municipal waste management system through a suitable mechanism to manage the collection, transportation, processing and disposal.

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 225 of 265 | Total 2642 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 225 264 265   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Steel Shots & Grits Steel Abrasives) Manufacturing Business

Steel shots are spherical grains created by atomizing (granulating) molten steel in a variety of diameters and hardnesses. Steel shots are made from scrap steel. Steel scrap is melted in a furnace and then atomized into shot using a water jet. Steel shots, because to their delicate production process, produce the least amount of dust. Steel shots are used to clean heavy metal parts like engine turbine blades, crankshafts, and heavy-duty springs. Particles with a majority of round edges, a length less than twice the maximum particle width, and no sharp edges, shattered faces, or other surface imperfections. Steel shots are available in a variety of sizes, from S110 to S330, and come in a variety of shapes. In contrast to grits, the larger the shot number, the larger the steel shot, hence a size S330 shot will be larger than a size S110 shot. The larger shot is used to peen heavier steel and remove thicker coatings. Crushing hardened shot, sifting the resulting material, and tempering it to the proper hardness produces steel grits. When cleaning speed is necessary and a poor finish is acceptable, it's employed in contingency and rust removal scenarios. Particles with a primarily angular shape, fractured faces, and sharp edges, as well as a shape less than half circular. It makes wiping off the surfaces a breeze. They are used in a wide range of applications (ship building, pipe building, steel construction, granite cutting, tank manufacturing etc.). Steel grit's increased hardness, combined with its flawless microstructure, ensures maximum durability and impact energy transmission. Steel grit is best used in high-stress, severe environments. In a short amount of time, it eliminates a wide spectrum of surface impurities from steels and other foundry metals. The most often used grit grits range from G25 to G80, and they extend the life of conventional abrasive materials by about 1,000 to 1, cutting raw material expenses. As the number of grits grows, the size of the actual blast media particle shrinks. High carbon steel shot is required for desanding, descaling, cleaning, shot peening, and other applications. Because of the centrifugal atomization technique and twofold heat treatment used at the Airblast plants, as well as ongoing quality control methods, the shot is of the highest quality. Shot peening is a cold working technique that includes blasting a spring's surface with small spherical media called steel shot. Each piece of shot that lands on the surface leaves a dimple or depression in the surface. Overlapping dimples generate a uniform layer of metal under residual compressive stress. Fatigue cracks will not form or propagate in a compressively stressed zone. When the surface develops a residual compressive stress, the applied load's tensile stress must first overcome the residual compressive stress before the resultant surface stress can become tensile. Steel shot and grit are used primarily in surface preparation to remove mill scale, dirt, and rust from metal surfaces, as well as to physically modify the metal surface, such as creating roughness for better paint and coating application, such as powder coating, enamelling, painting, metallization, rubber bonding, and so on. In shot blasters, steel shots are regularly employed. In accordance with India's forecasted healthy economic growth, the INR 25 billion organised steel abrasives sector is expected to grow at a CAGR of 13% over five years to INR 40 billion. Steel abrasives have always grown in lockstep with India's GDP growth. This shows how dependent the industry is on India's economic performance. India's remarkable GDP growth rate of above 7% is thus a major boon to the country. The steel abrasives market is expected to grow at a healthy rate in the coming years. Rapid industrialization and increased car production are the two main themes driving market expansion. To alleviate environmental concerns, leading vehicle manufacturers are designing low-weight products that emit less carbon dioxide, are cost-effective, and provide exceptional performance. Steel abrasives are expected to profit from an increase in demand in end-use sectors for manufactured industrial items with high precision finishes. Furthermore, high expansion in the global construction sector is expected to propel the steel abrasives market. Asia Pacific is expected to be the largest market for steel abrasives in the next five years, owing to a significant increase in industrial applications in the past five years. India, China, Russia, Brazil, and South America are just a few of the major economies with significant market expansion potential. Over the forecast period, the market for steel abrasives is expected to rise at a CAGR of 6.2 percent (2019-2026). The global steel abrasives market is expected to develop at a CAGR of 6.5 percent from 2017 to 2023, rising from $34,615 million in 2016 to $53,634 million in 2023. Abrasives are utilised in the automotive, electronics, construction, and industrial industries to produce a good polished surface finish. Key Players: • 3M India Ltd. • Grindwell Norton Ltd. • Hi-Tech Recycling (India) Pvt. Ltd. • Nippon Steel & Sumitomo Metal India Pvt. Ltd. • Orient Steel & Inds. Ltd. • Rotocast Industries Ltd.
Plant capacity: 40 MT per dayPlant & machinery: 722 Lakhs
Working capital: -T.C.I: Cost of Project: 1884 Lakhs
Return: 28.00%Break even: 66.00%
Add to Inquiry Add to Inquiry Basket

Start Production of Silica from Rice Husk Ash

Rice husk ash silica is a feasible alternative to traditional sand in the concrete industry, especially in places where sand is scarce. Silicon dioxide is produced by extracting silica from rice husk ash using high-temperature calcination and carbonization techniques, and it can be added to concrete mixes to improve properties like as strength, density, air entrainment, and freeze-thaw resistance. The husk left behind from milling is commonly utilised as a fuel in paddy processing boilers, generating energy through direct combustion and/or gasification. By inflicting harm to the ground and surrounding region where it is discharged, this RHA poses a substantial environmental danger. Many solutions are being examined for disposing of them through commercial use of this RHA. India produces 12 million tonnes of rice husks each year. The annual output of husk is expected to be 80 million tonnes. Rice husk is a waste product of the rice milling process that is often left to rot in the field or burned in the open. Rice husk has been used as a fuel for cooking and parboiling paddy rice in some poor countries. Different types of silica area given below:- Rice husk ash's high silica concentration has generated interest in finding economic uses for it. Although silica can be found as a component of cells or cell walls in almost every arial region of the rice plant, it is most abundant in the husk. Silica is one of the most valuable inorganic chemical compounds. Amorphous, crystalline, and gel forms are all possible. Precipitated Silica (also known as particulate silica) is a mixture of colloidal-size ultimate particles that haven't formed a significant gel network throughout the preparation process. There are three different forms of amorphous silica. With high-speed neutrons, silica was created, indicating either amorphous or crystalline silica. Vitreous silica or glass formed by fusing quartz includes micro amorphous silica. At high temperatures, gynogenic silicas are formed by condensation of SiO2 from the vapour phase, or at low temperatures, by chemical reaction in the vapour phase followed by condensation. In an aqueous solution, silica can be found as sols, gels, or particles. Concentrating an under saturated solution into a heated saturated solution, or creating Si(OH)4 of the silica ester SiH4, SiS2, SiCl4, or Si, yields amorphous silica. Precipitated Silica is a porous soluble silicate solution with highly regulated particle sizes. Precipitated silica powders have a more open structure with less volume than dried pulverised gels. As a filler for paper and rubber, as a carrier and diluent for agricultural chemicals, as an anti-caking agent, to control viscosity and thickness, and as a cleansing agent, silica is used in toothpastes and cosmetics. 1. Adhesive: Silica is utilised as a thickening and reinforcing ingredient, as well as to increase bond strength. The dispersed silica particles within a liquid adhesive harden quickly when it comes into contact with a solid surface. Natural and synthetic rubber-based adhesive. 2. Chappals: Silica is used in shoe soles because of its wear and tear resistance, non-scuffing qualities, and capacity to generate light-colored or even translucent compounds. 3. Conveyor Belt & Transmission Belt: Silica is used to improve tear strength because of its small particle size and complex aggregate structure. 4. PVC Sheets: Silica enhances pigment dispersion, works as a separating agent and absorbent to accelerate flow, and imparts a dry feel to the compound. 5. Railway Pads: Silica is used in railway pads for a variety of reasons, including: 6. Rubber Belts and Rubber Hoses: Silica improves the strength and durability of industrial rubber belts and rubber hoses, as well as their heat resistance and tear strength. 7. Silicon Tubes: Silicone rubber is used in a wide range of applications where its unique properties are beneficial. The type and amount of filler used in the compound has a big impact on a lot of these qualities. India's silica market was worth USD 46.8 million in 2019-20. In the coming years, it is predicted to increase at a CAGR of 6.5 percent. Strong product demand in the food industry has helped the market gain pace in recent years due to its anti-caking and super absorption capabilities. The rising use of silica in the rubber industry's manufacturing of micro sheets, rice rollers, thermoplastic rubber, PVC sheets, and shoe soles is likely to propel the market ahead. Increased use of the product in transmission and conveyor belts, notably for higher tear strength and elastomer compound reinforcement, is likely to drive market growth over the forecast period. Tyre demand is increasing in India, China, Indonesia, South Korea, Japan, Malaysia, Taiwan, Mexico, the United States, and Germany, owing to increased car manufacture. Rapid economic growth, increased government spending, improved road infrastructure, and a growing preference for personal transportation are all expected to boost demand for automobiles, propelling the market forward. In 2018, the global silica market was worth USD 5.22 billion, and it is predicted to increase at an annual pace of 8.6% over the next five years. The breadth of the market includes precipitated, fumed, gels and sols, as well as microsilica (fumes). The increased demand for the product from the rubber industry is the primary driver of the market. Silica in rubber improves abrasion resistance, tensile strength, and flex fatigue properties. It is commonly used in tyre applications because of its ability to increase the binding and tear resistance between rubber tyres and iron reinforcements.
Plant capacity: Silica: 5.80 MT Per Day | Activated Carbon (by product): 0.64 MT Per Day | Sodium Carbonate (by product): 0.96 MT Per DayPlant & machinery: 745 Lakhs
Working capital: -T.C.I: Cost of Project: 1121 Lakhs
Return: 27.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

A Complete Business Plan for Lithium Ion Battery (Battery Assembly)

In portable devices such as cell phones, tablets, laptops, and even electric cars, lithium ion batteries are the most extensively utilised power source. They're employed in these devices because they're light and have a high energy density, meaning they pack a lot of power into a tiny space. However, the process of making lithium ion batteries is complicated, and it might be difficult to ensure that each component is properly installed so that the batteries function properly later. For a variety of reasons, lithium ion batteries have grown extremely popular in recent years. They have a high discharge rate and may be used in a variety of applications, but they're especially popular because they don't contain heavy metals like mercury or cadmium, which were formerly used in battery technology. As a result, they are far more easily recycled than previous batteries. These batteries can also be recharged, allowing users to reuse them instead of throwing them away. Lithium-ion batteries are more expensive up front than other types of rechargeable cells, but they save money in the long run since they can be recharged multiple times before needing to be replaced. In fact, they have a longer life expectancy than other battery kinds. Lithium-ion batteries can be used as primary power sources for electronics and tools, as well as emergency backup power supplies, and even integrated into home solar or wind turbines. (1) Lithium-ion batteries are used in cameras and calculators. (2) They're found in cardiac pacemakers and other medical implants. (3) They're used in telecommunications, instrumentation, portable radios and televisions, and pagers. (4) Laptop computers, cell phones, and aerospace applications all use them. Advantages • More Compact Design: Li-ion batteries are smaller and lighter than traditional rechargeable batteries when compared to their capacity, and are thus used in portable consumer electronics devices where weight and form factor are important selling points. • High Energy Density: Li-ion batteries have a higher energy density than conventional rechargeable batteries. Lithium-ion batteries deliver a lot of power without being too bulky. • Lower Self-discharge and Longer Shelf Life: While compared to other rechargeable batteries, Li-ion batteries have a lower self-discharge rate of about 1.5 percent per month, allowing for a longer shelf life when not in use due to the slower drain. • Lower Memory Effect: The process of rechargeable batteries losing their maximum energy capacity due to frequent recharges after only being partially discharged is referred to as memory effect. • Fast Charging: Lithium-ion batteries charge faster than other rechargeable batteries including lead acid, nickel-metal hydride, and nickel-cadmium. • Longer Lifespan: Li-ion batteries have a longer life span than conventional batteries. Certain lithium ion batteries lose 30% of their capacity after 1000 cycles, but sophisticated lithium ion batteries retain their capacity even after 5000 cycles. • Low Maintenance: Lithium-ion batteries do not need to be maintained in order to function properly. • High Open-Circuit Voltage: Due to their chemistry, Li-ion batteries have a higher open-circuit voltage than other batteries such as lead acid, nickel-metal hydride, and nickel-cadmium. The India lithium-ion battery market is estimated to develop at a robust CAGR of 29.26 percent over the forecast period of 2018-2023. The Indian automobile sector is one of the country's most vital, contributing for around 7% of the country's GDP. In April-March 2017, the industry produced 25.31 million vehicles, including commercial, passenger, two- and three-wheeled vehicles, and commercial quadricycles, compared to 24.01 million in the same period last year. The Indian automobile sector is one of the country's most vital, contributing for around 7% of the country's GDP. In April-March 2017, the industry produced 25.31 million vehicles, including commercial, passenger, two- and three-wheeled vehicles, and commercial quadricycles, compared to 24.01 million in the same period last year. The Indian government is focusing on energy diversification and striving to achieve its lofty goal of 175 GW of renewable capacity by 2022. India's total solar PV capacity has topped 10 GW, an almost fourfold growth since May 2014 levels, with another 14 GW pipeline project knocking on the door and another 6 GW to be auctioned soon. Similarly, India's wind power capacity is expected to double to 185 GW by 2025, representing an eight-fold increase over 2015 and accounting for nearly 14% of the country's renewable energy demand. Large-scale renewable energy deployment in the country faces significant ramping and intermittency difficulties, which can be overcome by widespread use of lithium-ion batteries as energy storage devices.
Plant capacity: 150 Nos per dayPlant & machinery: 155 Lakhs
Working capital: -T.C.I: Cost of Project: 708 Lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

PVC Edge Banding Tape Manufacturing Business

An edge band is a piece of trim that hides a finished or unfinished edge, such as on doors and windows. Both wood and metal-look edging can be replaced with a PVC edge band. It's highly durable and has a lovely textured finish, giving your home a high-end aesthetic for a reasonable price. Some of the advantages of using PVC edge banding tape in your home are listed below. When Should You Use PVC Edge Banding Tape? Edge banding is useful for a number of tasks around the house, including: Damaged or missing door casing can be replaced with PVC edge banding. Any window mouldings that look to be cheap should be replaced. Replace the carpets at the base of the baseboards. Simple doors can be made to look more appealing. To acquire an expensive interior designer style, you don't have to spend a lot of money. DIY tasks are a breeze when you use our all-purpose glue (Industrial Strength) for quick and permanent results. The outstanding double-sided tape comes in a large roll that may be used for a number of household tasks. It sticks well to drywall, wood, and other common household materials, so you may use it on almost any surface. Edge banding is a technique for increasing the durability and giving the illusion of a solid or more expensive material by covering the exposed edges of materials such as plywood, particle board, and MDF. Edge banding can be done with face frames or moulding. Edge banding can be made from a variety of materials, including PVC, ABS, acrylic, melamine, wood, and wood veneer. Traditional edge banding was a time-consuming process that required standard carpentry tools and supplies. In current applications, edge banding is applied to the substrate using an automated process that uses a hot-melt adhesive, particularly for high-volume, repeated production methods like cabinet doors. Some of the raw materials used in hot melt adhesives include EVA, PUR, PA, APOA, and PO. A substrate primer can be used as a bonding agent between the adhesive and the substrate. Thicker edge bandings normally require a slight concavity to establish a tight glue line. Thicknesses ranging from.018" to 5mm and beyond are possible. The equipment that applies the edge banding is known as an edge bander. Edge banders apply edge banding to the substrate, trim the leading and trailing edges, flush the top and bottom with the substrate, scrape any surplus, and polish the finished edge. PVC edge banding is the most popular choice for Pressure Laminated and Melamine Cabinets. As modern European cabinetry grows increasingly popular, cabinets with glossy or colourful finishes are becoming more common. PVC (polyvinyl chloride) edge banding is a thermoplastic resin that is both flexible and durable. Colors, textures, and wood grains are generated by blending pigments and other materials, giving edge banding an almost infinite range of colour, texture, and grain options. • The wooden bit isn't compatible with the tabletop or laminates, but the edge band is. • Compared to the hardwood bit, the PVC edge band is substantially less expensive. A hardwood bit's price is measured in running feet, while an edge band's price is measured in running metres. • The E3 edge band softens the edges of furniture. One metre = 3.2 feet. Sharp edges on other covers do not cut or hurt adults or small children. • There are no nails allowed. During bidding, a small portion of the nail may come loose and cause damage to the garments. There is no risk of injury with the E3 edge band because it is a nail-free device. • The least amount of adhesive is used for pasting. • The E3 edge band is more durable than a wooden bit, as well as being 100% recyclable and environmentally friendly. The India edge banding materials market is estimated to develop at an exceptional CAGR of 11% during the assessment period. More investments in India's construction sector, a significant increase in the number of residential building projects, technical advancements, expanded inventiveness in the interior design arena, and increased R&D activities are all contributing to market growth. In order to improve product quality and build a solid footing in the industry, leading players in the current India edge banding materials market are likely to focus on R&D initiatives. The edge banding materials market in India is expected to be valued more than US$ 140 million by 2030. The rapid rise of India's residential construction sector is likely to increase furniture demand. This is expected to increase demand for edge banding materials in India over the forecast period. The growing construction sector, particularly in developing regions such as Asia Pacific, particularly in India, is expected to provide considerable opportunities for current edge banding materials market participants. In growing countries, the residential sector is quickly expanding, resulting in increased demand for edge banding materials.
Plant capacity: PVC Edge Banding Tape(Size 22 mm, 50 mter, 1 mm Roll): 303,030 Meter Per DayPlant & machinery: 372 Lakhs
Working capital: -T.C.I: Cost of Project:1383 Lakhs
Return: 30.00%Break even: 47.00%
Add to Inquiry Add to Inquiry Basket

Profitable Business of Lithium Ion Battery Pack

Two electrodes are separated by an electrolyte in a lithium ion (li-ion) battery. In almost all lithium-ion batteries, there are three layers: two electrodes (the cathode and anode) separated by a separator layer made of synthetic organic polymer material. The top electrode, the cathode, is negatively charged, while the bottom electrode, the anode, is positively charged. The separator acts as an insulator, preventing charges from freely travelling across the electrodes until electrons are pushed through it by a device or power source from one electrode to the next. A lithium iron phosphate (LFP) battery is a type of lithium-ion battery that can charge and discharge at high rates when compared to other types of batteries. It's a rechargeable battery with a LiFePO4 cathode, hence the name. A variety of properties distinguish lithium iron phosphate batteries, including: • Increased safety • Higher power density • Lower discharge rate • Flat discharge curve • Less heating • More charge cycles Lithium iron phosphate batteries differ from other lithium-ion batteries in that they may deliver a constant voltage and have a longer charge cycle, ranging from 2000 to 3000 cycles. LFP batteries are both environmentally friendly and structurally sound. They have a low energy density and a low discharge rate. In comparison to other batteries, they don't become hot readily and stay cool. Because the battery's composition prevents thermal runaway, it's considered safe for home use. Phosphate-based technology is more thermally and chemically stable than Lithium-ion technology created with other cathode materials, resulting in improved safety. Lithium phosphate batteries are incombustible in the event of charge or discharge mismanagement; they are more stable in overcharge or short circuit conditions, and they can withstand high temperatures without degrading. Lithium Iron Phosphate has a wide range of properties that allow for the production of a wide range of battery sizes, and it has found key applications in the following areas: 1) Large electric vehicles include buses, electric automobiles, tour buses, hybrid vehicles, and other attractions. 2) Light electric vehicles, such as electric bicycles, golf carts, tiny cars, forklifts, and electric vehicle cleaning wheelchairs Power tools include lawn movers, electric saws, and electric drills, to name a few. 4) Toys that can be controlled remotely, such as cars, boats, and planes. 5) Storage solutions for solar and wind energy. 6) Warning lights, UPS, miner's lamp, and other emergency lights 7) Small and portable medical equipment and devices. 8) Cell phones, laptops, camcorders, iPods, and other technological gadgets 9) Lithium ion batteries are used in a number of cutting-edge electric vehicles, notably the first of its kind, the Tesla Roadster. It takes around 3.5 hours to fully charge the 6831 lithium ion cells in this vehicle's batteries, which weigh half a tonne (1100lb). The lithium-ion battery market in India is expected to grow at a CAGR of 34.8 percent from 2019 to 2024. Factors like lowering lithium-ion battery prices and the emergence of new and exciting markets. Electric vehicles and energy storage systems (ESS) for commercial and residential applications are projected to propel the lithium-ion battery industry in India. The lack of major reserves needed for lithium-ion battery production is expected to pose a barrier to local production and the country's lithium-ion battery market. The increased use of electric vehicles in India is projected to enhance the need for Lithium (Li)-ion battery production. The most prevalent type of electrochemical energy storage is lithium-ion batteries. The principal electrolyte component in these rechargeable batteries is Li-ion. Lithium, as well as other minerals like cobalt, aluminium, and copper, must be procured and mined in order to manufacture Li-ion batteries. The Li-ion battery manufacturing process includes the fabrication of cell components (electrodes, electrolytes, and separators), cell and module production, battery pack assembly, and component integration. The Li-ion battery manufacturing industry in India is still in its infancy. However, the country has the potential to become a major producer of Li-ion batteries in the next years. The Li-ion battery manufacturing industry in India can be developed in three stages: stage one (2017 to 2020), stage two (2021 to 2025), and stage three (2020 and beyond) (2020 to 2050). From 2026 to 2030. The country's principal goal for stage one, which runs from 2017 to 2020, is to create a favourable industrial climate.
Plant capacity: Lithium Ion Battery Module Cap. 0.4 KWH 595.2 Module per day | Lithium Ion Battery Module Cap. 4.8 KWH: 48.8 Module per day | Lithium Ion Battery Module Cap. 5 KWH: 46.8 Module per day | Lithium Ion Battery Module Cap. 10 KWH: 23.4 Module per dayPlant & machinery: 36 Cr
Working capital: -T.C.I: Cost of Project: 50 Cr
Return: 27.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Start Malic Acid (Powder) Production Business

Malic acid, also known as L-malic acid, is a dicarboxylic acid that occurs naturally. D-malic acid, which can be made as a racemic combination of DL-malic acid, is another optically active isomer. Because of its high abundance in apples, malic acid is sometimes referred to as "apple acid." Humans, plants, and animals all create malic acid as part of their metabolic processes. Malic acid provides the carbon skeleton and energy required for amino acid synthesis in the Krebs and glyoxyl atecycles. Malic acid crystallises as white, translucent crystals from aqueous solutions that are anhydrous, non-hygroscopic (under normal conditions), and non-volatile, with a melting temperature of about 130°C. Its initial dissociation constant produces acidic characteristics that are strong enough in solution to provide a large hydrogen ion concentration while remaining mild enough to make an effective buffer solution. Because malic acid is anhydrous and non-hygroscopic, it can be stored for long periods of time in normal conditions without caking. Because of this property, final goods containing Malic Acid, whether in powder or granular form, have a long shelf life. Malic acid has a melting point of around 130°C, which is significantly lower than that of citric acid (153°C). This distinction is very intriguing and significant, particularly in the creation of hard candies. Malic acid has several uses in the culinary sector (beverages, sweets, chewing gums, jellies, jams, frozen confectionary), animal feed (pet food, pig acidifier combinations), metal treatment, metal plating, pharmaceutical and cosmetic industries, and building materials. Because of its buffering capability and ability to augment the efficacy of antimicrobial preservatives, malic acid is becoming more widely employed as a flavour enhancer in both liquid and powder drinks. Malic Acid is widely employed as a substitute for/or in combination with Citric Acid in beverage formulations due to its acidic taste, and so contributes significantly to increasing and strengthening the taste of the fruits tastes used. Because of its low melting point, Malic Acid is preferred over other acidulants in candies and sweets. This is especially important in hard candies, because the acid can easily be absorbed into the cooked syrup on the slab. Also, because the needed temperature is so low, caramelization and sugar inversion can be avoided. Malic acid is also utilised in effervescent and soft candies. Acidulants are used in a variety of desserts, including ices, sherbets, variegated ice creams, jelly dessert powders, milk puddings, and so on. The use of acidulants in the preservation of fruit and vegetables, whether fresh or canned, is critical. The pH of canned fruits and vegetables must be less than 5 during sterilisation in order to apply a light heat treatment (lower temperature and shorter treatment). The global malic acid market is predicted to grow at a CAGR of 5.0 percent from 2020 to 2025, with a market size of USD 182.6 million in 2020. Over the projected period, rising demand from the food and beverage industry to enhance flavour through speciality ingredients is expected to fuel industrial growth. In the coming years, the market is expected to be driven by rising demand for nutritional bars and protein drinks, as well as a growing preference for healthier functional beverages with high nutrient flavours. Furthermore, the market is expected to benefit from support from other regulatory authorities such as the Food Safety and Standards Authority of India (FSSAI) and the European Food Safety Authority (EFSA) over the projected period. Maleic anhydride and fumaric acid, both petroleum products, are the most common raw materials used to make malic acid. In addition, the utilisation of ecologically sustainable innovations such biomass feedstock is a crucial raw material trend that is expected to support industrial growth throughout the forecast period. Furthermore, the FDA's GRAS designation for malic acid is expected to boost commercialization for food-grade applications. Beverages, confectionary and food, and personal care and cosmetics are the three end-use categories in the global malic acid market. Non-carbonated and carbonated beverages, as well as flavoured drinks and alcoholic ciders, are included in the beverages category. The segment held the biggest market share and is expected to grow at a CAGR of 4.6 percent in revenue over the forecast period. The segment also dominated global demand, thanks to rising demand for liquid and powdered beverages, as well as artificial flavorants in carbonated beverages. Due to increase per capita disposable income in Asia Pacific's developing markets, confectionary and food, as well as personal care and cosmetics, are the most popular segments. Due to shifting eating patterns and dietary preferences, the confectionery and food category is expected to grow at a revenue-based CAGR of 5.6 percent over the forecast period. Because of the high demand for malic acid in end uses such as processed foods and hard candies, the segment accounted for a considerable revenue share in North America in 2018.
Plant capacity: 3.3 MT per dayPlant & machinery: 391 Lakhs
Working capital: -T.C.I: Cost of Project: 1285 Lakhs
Return: 12.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing of Ascorbic Acid (Powder) from Sorbitol

Vitamin C, or ascorbic acid, is an essential component that the body cannot make on its own and must get from outside sources in order to stay healthy. Because vitamin C has so many roles, getting enough of it every day can be challenging if you don't know what it does or where to get it. Vitamin C aids in the formation of collagen, strengthens the immune system, aids wound healing, and reduces the risk of some malignancies by neutralising free radicals in the body. As a result, researchers, medical practitioners, and the pharmaceutical and food industries are placing a high priority on detecting and quantifying ascorbic acid in food samples, goods, and nutraceuticals. Indian gooseberry, citrus fruits such as limes, oranges, and lemons, tomatoes, potatoes, papaya, green and red peppers, kiwifruit, strawberries, and cantaloupes, green leafy vegetables such as broccoli, fortified cereals, and their juices are among the best sources of ascorbic acid. Vitamin C (ascorbic acid) is essential for both bodybuilding and illness prevention. The antioxidant activity, the synthesis of protein, tendons, ligaments, and blood vessels, the healing of wounds and formation of scar tissue, the repair and maintenance of cartilage, bone, and teeth, and the helping in the absorption of iron are just a few of the tasks. The antioxidant activity of ascorbic acid (Vitamin C) is one of its most essential qualities. Vitamin C's antioxidant action aids in the prevention of cancer, cardiovascular disease, the common cold, age-related muscle degeneration, and cataract. Vitamin C's antioxidant properties aid in the treatment of cardiovascular disorders. Vitamin C reduces monocyte adherence to the endothelium, improves endothelium-dependent nitric oxide generation and vasodilation, and decreases vascular smooth muscle cell death, all of which help to avoid plaque instability in atherosclerosis. Vitamin C also helps to protect other vitamins (such as vitamin A and vitamin E) from oxidative damage. Vitamin C protects the gums and slows the ageing process. It improves overall physical health by eliminating harmful metals from the body. Vitamin C inhibits cataract formation, making it effective in the treatment of glaucoma. Another major effect of vitamin C is that it aids in protein synthesis. Collagen synthesis is aided by vitamin C. Collagen keeps our skin looking young by preventing wrinkles and making it firm and robust. Organs and other soft tissues are also protected and supported by collagen. Hydroxyproline, one of the amino acids needed to make collagen, can only be formed when vitamin C is present. In 2020, the global Ascorbic Acid market was worth USD 1.09 billion, with a CAGR of 5.0 percent predicted. Ascorbic acid is a powerful natural antioxidant that aids in a variety of metabolic and repair processes throughout the body. Growing awareness of the effectiveness of ascorbic acid in the therapeutic reduction of serum cholesterol levels and different types of cancer, growing demand for fresh leafy vegetable products, and increasing consumption of ascorbic acid to prevent vitamin C deficiency are key factors expected to boost demand for ascorbic acid and dr. The worldwide ascorbic acid market has been divided into two grades: pharmaceutical grade and food grade. Due to rising demand for vitamin C-fortified foods and beverages, rising use of ascorbic acid as a food additive and acidity regulator, and as a key source of vitamin C in supplements, the food grade segment is likely to see considerable revenue growth throughout the forecast period. Many foods are fortified with ascorbic acid to efficiently replace vitamin C content, and food grade ascorbic acid is often used to fortify or add citrus taste to fruit juices, fruit-flavored candies, cured meats, and frozen fruits. Due to increased vitamin C manufacturing, increased investment in R&D activities to develop effective vitamin C supplements, rapidly growing food and beverage industry due to increased focus on functional foods and rapid urbanisation, changing lifestyle and increasing disposable income, and growing demand for vitamin C-enriched cosmetic products, the Asia Pacific market is expected to grow at a CAGR of 5.5 percent during the forecast period.
Plant capacity: Ascorbic Acid (Powder): 8.3 MT Per Day | Carbon Di-oxide by Product: 11.6 MT Per Day | Sodium Hydroxide by Product: 7.7 MT Per DayPlant & machinery: 803 Lakhs
Working capital: -T.C.I: Cost of Project: 2444 Lakhs
Return: 29.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Sterile Water for Injection. Most Profitable Manufacturing Business to Start.

Sterile Water for Injection (SWFI) is sterile water that has been made free of harmful microorganisms so it can be used as an injection. SWFI is used in both hospitals and doctors’ offices to give injections to patients or to prepare and clean an area before giving an injection. Sterile Water for Injection is sterile, non-pyrogenic water for injection, USP. The pH range is 3.5–7.0 and the osmolality range is 50–300 mOsm/kg (calc). Visit this Page for More Information: Start a Business in Pharmaceutical sector Uses Sterile Water for Injection is indicated for use only as a solvent or diluents vehicle for parenterally administered drugs or solutions and as a source of water for parenteral fluid replenishment after suitable additives are introduced to avoid tonicity of the blood. In some cases, it may be used as a lavage or rinsing agent, but isotonic solutions suitable to the area of exposure are preferred if available. Administered intravenously as a vehicle for drugs, Sterile Water for Injection provides a source of water for parenteral fluid replenishment after proper osmolarity has been achieved. Business Plan: Detailed Project Report on Manufacturing of Sterile Water for Injection Manufacturing process Water, Fillers-Vitamin B2, Glycerol, and Thiamine hydrochloride (Vitamin B1), and other chemicals are utilised in its preparation to produce a more stable product and consistent pharmaceutical grades from batch to batch. It will then be filtered one more using a 0.22m syringe filter before being filled into sterile bottles or bags. It takes around an hour and a half to complete the process. Related Feasibility Study Reports: Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Drug Intermediates, Speciality Chemicals, Raw Materials, Fine and Specialty Chemicals Intermediates, Pharmaceutical Bulk Drugs After being autoclaved at 121°C for 15 minutes, this water becomes sterile. The sterile solution is suitable for usage in hospitals, as well as the food, chemical, and research industries. It can also be used to clear blood samples of pollutants before analysing them with a spectrometer or detecting them with test tubes at dialysis centres and blood testing institutes. Read Similar Articles: Pharmaceutical Industry Market Outlook: The global market for sterile water products is forecast to reach US$ 738.9 million by 2022, growing awareness of sterility and safety in injections will propel market growth over next six years. The rising incidence of infectious diseases and growing geriatric population base globally has resulted in increasing demand for sterile water solutions that can protect patients from unwanted infections and other related ailments post-injections. Read our Books Here: Pharmaceutical, Drugs, Proteins Technology Handbooks India's biotechnology industry comprising biopharmaceuticals, bio-services, bio-agriculture, bio-industry, and bioinformatics is expected grow at an average growth rate of around 30 per cent a y-o-y to reach US$ 100 billion by 2025. The increase of lifestyle diseases in India such as diabetes and heart disease has heightened the demand for medicines. There is a large pool of scientific and research expertise in India, and an enormous population with high incidences of cancer and chronic disease. The shorter recruitment time-frames and lower costs make India an ideal setting for drug development and clinical trials. Watch other Informative Videos: Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Pharmaceutical Bulk Drugs Indian pharmaceutical sector is expected to grow to US$ 100 billion, while medical device market is expected to grow US$ 25 billion by 2025. Pharmaceuticals export from India stood at US$ 20.70 billion in FY20. Pharmaceutical export include bulk drugs, intermediates, drug formulations, biologicals, Ayush and herbal products and surgical. Key Players: • Albert David Ltd. • Amanta Healthcare Ltd. • Chandra Bhagat Pharma Ltd. • Denis Chem Lab Ltd. • Health Biotech Ltd. • Ivy Health & Life Sciences Pvt. Ltd. • Kopran Ltd. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Make Profit by Producing Polyester Textured Yarn from Used Pet Bottle. Investment Opportunities in Textile Industry

It is a kind of composite yarn which composed of polyester staple fiber and polypropylene fibers as filament with teflon lubricant. It has higher tensile strength, abrasion resistance, flexibility, dyeing and wearability than similar textile products. They are no chemical substances remaining after recycled production. Our PET material imported directly from Coca Cola bottling factory could guarantee consistent quality too because Coke makes strict control of their PET bottles making procedures! Visit this Page for More Information: Start a Business in Textile Industry Polyester texturised yarn (PET) is a fabric made of polyester, created using a process that combines individual polyester filaments with an elastic, sinuous yarn structure. It is primarily used in carpets. The 'texturising' in its name refers to its fuzzy feel and loops, which resemble twisted tufts of cat's hair or carpet pile; it has also been described as resembling strands of steel wool. PET is primarily made by recycling plastic bottles into polyester fibres. Read Similar Articles: Textile Industry Benefit of Starting Polyester Texturised Yarn from Used Pet Bottle Business Use pet bottle fibre to make Polyester textured yarn. You can create different look, feel and style with unique touch of recycled material. And you don’t have to worry about problems related with pet bottle waste in our ecosystem. It is not only a good choice for running new business, but also a green idea to help keep our environment safe. Besides, it is profitable as well as creative product that your customers are going to love to use. Related Project: Business Plan for Polyester Textured Yarn From Used Pet Bottle This technique creates final fabric that has high aesthetic quality and competitive price when compared with standard textile fabrics. In fact we have observed market acceptance among consumer even before trials are conducted due to its unique appearance resembling hairy or feathery skin or other eco-friendly natural materials. Watch other Informative Videos: Textile Industry Manufacturing Process: Polyester texturised yarn (PET) is prepared by processing PET bottles, which are considered as secondary raw materials. In order to prepare PET yarn from PET bottle, firstly a debundling unit is required for isolating cuttings and removing labels from bottles. After that, bottles are scrapped in a shredder to obtain chopped PET flakes having different sizes. Watch Video: Production of Polyester Textured Yarn from Used Pet Bottle | Yarn Made From Recycled Plastic Thus obtained flakes of PET are dissolved in hot caustic soda solution so as to get a viscose solution at 12% solids. The resulting polymer melts are collected in cone bottom tank and spun into filaments using state-of-the-art high speed single screw extruder with temperature controlled cooled air. Related Feasibility Study Reports: Textile Bleaching, Dyeing, Printing And Finishing, Textile Auxiliaries Projects Market Outlook: Polyester Yarn market size is expected to gain market growth in the forecast period of 2021 to 2025, with a CAGR of 7.4% in the forecast period of 2021 to 2025 and will expected to reach USD 110580 million by 2025, from USD 83210 million. Polyester is the most desirable and demanded fiber in the textiles industry is owing to its improved physical properties, lower price, versatility, and recyclability, which provides a unique set of benefits incomparable by any other natural or synthetic fibers. The demand for both drawn texture yarn and fully drawn yarn is growing in the textile industry. However, with the development of post-treatment technology and lower cost of fully drawn yarn, it is likely to outsell drawn texture yarn over the next few years. Read our Books Here: Textile Spinning, Processing, Natural Fibers, Natural Dyes, Pigments, Textile Dyes, Pigments, Dye Intermediates, Woollen Spinning, Weaving, Knitting, Dyeing Technology Global polyester yarn market size was valued at USD 10.67 billion in 2021 and is expected to grow at a CAGR of 3.2% during 2021–2025. High demand for polyester from Asia Pacific region primarily from China, India, and Japan has been driving global polyester yarn market growth over next few years. For More Details: - https://bit.ly/3pjGO2I See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: 1
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Invest in Highway Guard Crash Barrier Industry Start Manufacturing Business of Highway Guard Crash Barrier(Roll Forming with Metal Beam and Galvanizing Plant)

The guardrail system for protecting highways includes a number of different components, including horizontal and diagonal guardrails, end terminals and crash cushions. The main component in highway guardrail systems is a thick post that resembles a small telephone pole. Visit this Page for More Information: Start a Business in Industrial & Engineering Products Industry When damaged, these posts are difficult to remove from roadsides. Therefore, replacing them or parts of them with new units saves money in maintenance and road closures while increasing safety at accident sites. A guardrail, sometimes referred to as a guide rail or traffic barrier, is a railing system placed alongside roads and highways. Read Similar Articles: Engineering Goods Projects Its purpose is to reduce vehicular accidents and fatalities caused by vehicles leaving their lanes or crossing roadways. While guardrails have proven effective at preventing head-on collisions and vehicle rollovers. Watch Video: Manufacturing of Highway Guard Crash Barrier: Roll Forming with Metal Beam and Galvanizing Plant Uses The main use of these installations is to prevent traffic from veering off the road and into oncoming traffic. The guardrails can also help drivers avoid driving into a flooded or shallow area of water, known as hydroplaning. Some of these installations are designed with sensors that activate flashing lights at night, alerting drivers to stay in their lane on curvy roads. They’re also used to manage heavy flow of trucks carrying goods. Related Project: Roll Forming With Metal Beam, Highway Guard Crash Barrier And Galvanizing Plant Thus, these technologies save both time and money for transportation services. These metal barriers come in different types and shapes for varied uses. Highways authorities set up metal barriers made up of straight lines along busy highway routes to protect people from any accidents like collision, head-on collision, rollover, run-off etc., but some metal barricades aren’t installed straight; they curve upwards and contain several alternating sections between short posts along strategic locations such as curves or intersections where an accident is most likely to occur. In addition, these materials have built-in devices that force vehicles away from an intersection if they don’t slow down when approaching too quickly. Traffic officials who plan to erect them first dig trenches around specific areas where metal barriers need to be placed; thereafter, workers place strong steel posts inside each trench. Afterwards, crews pour concrete around each post. Watch other Informative Videos: Industrial & Engineering Products, Manufactured Goods, Mechanical, Automobile, Metal, Metallurgical, Wire, Aluminum, Copper Products, LPG Cylinder Benefits of Starting Highway Guard Crash Barrier The benefits of using a highway guardrail are obvious. It reduces damage to vehicles that have been involved in an accident, and even helps save lives by reducing injuries sustained in a crash. Of course, if you start your own guardrail manufacturing business, you can expect some significant financial perks as well. That’s why many entrepreneurs choose to build their businesses around these crucial traffic protectors. Here are three ways that a guardrail manufacturing company owner can benefit from his or her business. (1) Improve Safety for Drivers – You may not think about safety every day, but it should be near the top of your priority list when you get into business. By selling high-quality guardrails and other safety products, you can help prevent many devastating car accidents and make travel much safer than it would otherwise be. (2) Increase Profits – When people need to replace broken guardrails on roadways throughout their towns, they will often head directly to local retailers like hardware stores. If you instead set up shop as a manufacturer, though, you could snag many customers who might otherwise ignore retail locations. You’ll also likely be able to charge more for your product because of its quality. (3) Provide Additional Services – Many small towns don’t have guardrail manufacturers right in their communities yet. Related Feasibility Study Reports: Industrial & Engineering Products, Manufactured Goods, Industrial Engineering Products. Mechanical, Engineering, Automobile Industries, Metal, Metallurgical, S.S. Utensil, Wire, Aluminum, Brass, Copper Products, LPG Cylinder and Valves Market outlook In the following years, the market for traffic barriers is expected to increase at a rapid pace. Growing infrastructure and investment in construction activities are two major aspects driving the market need for traffic barriers. On highways, concrete and steel traffic barriers are chosen since they limit the number of accidents. Regardless, the benefits of concrete traffic barriers over steel traffic barriers are projected to increase demand for concrete traffic barriers around the world. Better urban planning is required to accelerate urbanisation in Asia Pacific's growing economies. With rising concerns about safety in public locations such as airports, hospitals, schools, and government and business institutions, the need for traffic barriers is expected to increase significantly. Read our Books Here: Steel, Iron, Ferrous, Non-Ferrous Metals With Casting And Forging, Aluminium, Ferroalloys Technology More investment opportunities and a functional transportation network generate growth chances for the traffic barriers industry as cities grow. Furthermore, increasing the vehicle fleet will result in more traffic bottlenecks on the highways as well as random accidents when travelling at high speeds. As a result, the government is likely to install a huge number of road barriers to prevent accidents and crowd management. Furthermore, in the event of riots, traffic barriers can be used to manage traffic, and the same can be used to prevent illegal access at high security bases or priority places such as (government buildings, airports, and so on). For More Details: - https://bit.ly/3K8WTjU See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports #DetailedProjectReport #BusinessIdeas #StartupBusinessIdea #EntrepreneurIndia #NPCSProjects #BusinessConsultant #ProjectReport #Startup #BusinessOpportunity #BusinessPlan #RollForming #Metal #Metalbeam #HighwayGuardCrashBarrier #ManufacturingofHighwayGuardCrashBarrier #ProductionofHighwaySafetyGuardrail #GalvanizingPlant
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 225 of 265 | Total 2642 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 225 264 265   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top