Project Reports & Profiles » Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

• Simplify procedures and expedite granting of mining leases.

• Provide certain relief to make mining activities easier.

• Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

• Encourage joint venture projects with SMDC.

• Clear mining lease applications and project report within 60 days.

• Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

• Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

Agro-Based Industries: Project Opportunities in Jharkhand

PROFILE:

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

GOVERNMENT POLICIES:

The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

Sericulture (Tasar Silk): Project Opportunities in Jharkhand

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

Steel Industry

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed as well as foreign direct investment up to 100% (under automatic route) has been permitted. The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels. With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector.

Rural Industries: Project Opportunities in Jharkhand

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1. Providing ample employment opportunities through rural industries.

2. Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3. Giving priority to participation of women in development of rural industries.

4. Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5. Implementing cluster approach.

6. Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7. Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

Tourism: Project Opportunities in Jharkhand

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 297 of 337 | Total 3361 projects in this category

« Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 297 336 337 Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all

Sort by

Start Production of Silica from Rice Husk Ash
Rice husk ash silica is a feasible alternative to traditional sand in the concrete industry, especially in places where sand is scarce. Silicon dioxide is produced by extracting silica from rice husk ash using high-temperature calcination and carbonization techniques, and it can be added to concrete mixes to improve properties like as strength, density, air entrainment, and freeze-thaw resistance. The husk left behind from milling is commonly utilised as a fuel in paddy processing boilers, generating energy through direct combustion and/or gasification. By inflicting harm to the ground and surrounding region where it is discharged, this RHA poses a substantial environmental danger. Many solutions are being examined for disposing of them through commercial use of this RHA. India produces 12 million tonnes of rice husks each year. The annual output of husk is expected to be 80 million tonnes. Rice husk is a waste product of the rice milling process that is often left to rot in the field or burned in the open. Rice husk has been used as a fuel for cooking and parboiling paddy rice in some poor countries. Different types of silica area given below:- Rice husk ash's high silica concentration has generated interest in finding economic uses for it. Although silica can be found as a component of cells or cell walls in almost every arial region of the rice plant, it is most abundant in the husk. Silica is one of the most valuable inorganic chemical compounds. Amorphous, crystalline, and gel forms are all possible. Precipitated Silica (also known as particulate silica) is a mixture of colloidal-size ultimate particles that haven't formed a significant gel network throughout the preparation process. There are three different forms of amorphous silica. With high-speed neutrons, silica was created, indicating either amorphous or crystalline silica. Vitreous silica or glass formed by fusing quartz includes micro amorphous silica. At high temperatures, gynogenic silicas are formed by condensation of SiO2 from the vapour phase, or at low temperatures, by chemical reaction in the vapour phase followed by condensation. In an aqueous solution, silica can be found as sols, gels, or particles. Concentrating an under saturated solution into a heated saturated solution, or creating Si(OH)4 of the silica ester SiH4, SiS2, SiCl4, or Si, yields amorphous silica. Precipitated Silica is a porous soluble silicate solution with highly regulated particle sizes. Precipitated silica powders have a more open structure with less volume than dried pulverised gels. As a filler for paper and rubber, as a carrier and diluent for agricultural chemicals, as an anti-caking agent, to control viscosity and thickness, and as a cleansing agent, silica is used in toothpastes and cosmetics. 1. Adhesive: Silica is utilised as a thickening and reinforcing ingredient, as well as to increase bond strength. The dispersed silica particles within a liquid adhesive harden quickly when it comes into contact with a solid surface. Natural and synthetic rubber-based adhesive. 2. Chappals: Silica is used in shoe soles because of its wear and tear resistance, non-scuffing qualities, and capacity to generate light-colored or even translucent compounds. 3. Conveyor Belt & Transmission Belt: Silica is used to improve tear strength because of its small particle size and complex aggregate structure. 4. PVC Sheets: Silica enhances pigment dispersion, works as a separating agent and absorbent to accelerate flow, and imparts a dry feel to the compound. 5. Railway Pads: Silica is used in railway pads for a variety of reasons, including: 6. Rubber Belts and Rubber Hoses: Silica improves the strength and durability of industrial rubber belts and rubber hoses, as well as their heat resistance and tear strength. 7. Silicon Tubes: Silicone rubber is used in a wide range of applications where its unique properties are beneficial. The type and amount of filler used in the compound has a big impact on a lot of these qualities. India's silica market was worth USD 46.8 million in 2019-20. In the coming years, it is predicted to increase at a CAGR of 6.5 percent. Strong product demand in the food industry has helped the market gain pace in recent years due to its anti-caking and super absorption capabilities. The rising use of silica in the rubber industry's manufacturing of micro sheets, rice rollers, thermoplastic rubber, PVC sheets, and shoe soles is likely to propel the market ahead. Increased use of the product in transmission and conveyor belts, notably for higher tear strength and elastomer compound reinforcement, is likely to drive market growth over the forecast period. Tyre demand is increasing in India, China, Indonesia, South Korea, Japan, Malaysia, Taiwan, Mexico, the United States, and Germany, owing to increased car manufacture. Rapid economic growth, increased government spending, improved road infrastructure, and a growing preference for personal transportation are all expected to boost demand for automobiles, propelling the market forward. In 2018, the global silica market was worth USD 5.22 billion, and it is predicted to increase at an annual pace of 8.6% over the next five years. The breadth of the market includes precipitated, fumed, gels and sols, as well as microsilica (fumes). The increased demand for the product from the rubber industry is the primary driver of the market. Silica in rubber improves abrasion resistance, tensile strength, and flex fatigue properties. It is commonly used in tyre applications because of its ability to increase the binding and tear resistance between rubber tyres and iron reinforcements.
Plant capacity: Silica: 5.80 MT Per Day \| Activated Carbon (by product): 0.64 MT Per Day \| Sodium Carbonate (by product): 0.96 MT Per Day	Plant & machinery: 745 Lakhs
Working capital: -	T.C.I: Cost of Project: 1121 Lakhs
Return: 27.00%	Break even: 45.00%
Add to Inquiry Basket

A Complete Business Plan for Lithium Ion Battery (Battery Assembly)
In portable devices such as cell phones, tablets, laptops, and even electric cars, lithium ion batteries are the most extensively utilised power source. They're employed in these devices because they're light and have a high energy density, meaning they pack a lot of power into a tiny space. However, the process of making lithium ion batteries is complicated, and it might be difficult to ensure that each component is properly installed so that the batteries function properly later. For a variety of reasons, lithium ion batteries have grown extremely popular in recent years. They have a high discharge rate and may be used in a variety of applications, but they're especially popular because they don't contain heavy metals like mercury or cadmium, which were formerly used in battery technology. As a result, they are far more easily recycled than previous batteries. These batteries can also be recharged, allowing users to reuse them instead of throwing them away. Lithium-ion batteries are more expensive up front than other types of rechargeable cells, but they save money in the long run since they can be recharged multiple times before needing to be replaced. In fact, they have a longer life expectancy than other battery kinds. Lithium-ion batteries can be used as primary power sources for electronics and tools, as well as emergency backup power supplies, and even integrated into home solar or wind turbines. (1) Lithium-ion batteries are used in cameras and calculators. (2) They're found in cardiac pacemakers and other medical implants. (3) They're used in telecommunications, instrumentation, portable radios and televisions, and pagers. (4) Laptop computers, cell phones, and aerospace applications all use them. Advantages • More Compact Design: Li-ion batteries are smaller and lighter than traditional rechargeable batteries when compared to their capacity, and are thus used in portable consumer electronics devices where weight and form factor are important selling points. • High Energy Density: Li-ion batteries have a higher energy density than conventional rechargeable batteries. Lithium-ion batteries deliver a lot of power without being too bulky. • Lower Self-discharge and Longer Shelf Life: While compared to other rechargeable batteries, Li-ion batteries have a lower self-discharge rate of about 1.5 percent per month, allowing for a longer shelf life when not in use due to the slower drain. • Lower Memory Effect: The process of rechargeable batteries losing their maximum energy capacity due to frequent recharges after only being partially discharged is referred to as memory effect. • Fast Charging: Lithium-ion batteries charge faster than other rechargeable batteries including lead acid, nickel-metal hydride, and nickel-cadmium. • Longer Lifespan: Li-ion batteries have a longer life span than conventional batteries. Certain lithium ion batteries lose 30% of their capacity after 1000 cycles, but sophisticated lithium ion batteries retain their capacity even after 5000 cycles. • Low Maintenance: Lithium-ion batteries do not need to be maintained in order to function properly. • High Open-Circuit Voltage: Due to their chemistry, Li-ion batteries have a higher open-circuit voltage than other batteries such as lead acid, nickel-metal hydride, and nickel-cadmium. The India lithium-ion battery market is estimated to develop at a robust CAGR of 29.26 percent over the forecast period of 2018-2023. The Indian automobile sector is one of the country's most vital, contributing for around 7% of the country's GDP. In April-March 2017, the industry produced 25.31 million vehicles, including commercial, passenger, two- and three-wheeled vehicles, and commercial quadricycles, compared to 24.01 million in the same period last year. The Indian automobile sector is one of the country's most vital, contributing for around 7% of the country's GDP. In April-March 2017, the industry produced 25.31 million vehicles, including commercial, passenger, two- and three-wheeled vehicles, and commercial quadricycles, compared to 24.01 million in the same period last year. The Indian government is focusing on energy diversification and striving to achieve its lofty goal of 175 GW of renewable capacity by 2022. India's total solar PV capacity has topped 10 GW, an almost fourfold growth since May 2014 levels, with another 14 GW pipeline project knocking on the door and another 6 GW to be auctioned soon. Similarly, India's wind power capacity is expected to double to 185 GW by 2025, representing an eight-fold increase over 2015 and accounting for nearly 14% of the country's renewable energy demand. Large-scale renewable energy deployment in the country faces significant ramping and intermittency difficulties, which can be overcome by widespread use of lithium-ion batteries as energy storage devices.
Plant capacity: 150 Nos per day	Plant & machinery: 155 Lakhs
Working capital: -	T.C.I: Cost of Project: 708 Lakhs
Return: 27.00%	Break even: 63.00%
Add to Inquiry Basket

PVC Edge Banding Tape Manufacturing Business
An edge band is a piece of trim that hides a finished or unfinished edge, such as on doors and windows. Both wood and metal-look edging can be replaced with a PVC edge band. It's highly durable and has a lovely textured finish, giving your home a high-end aesthetic for a reasonable price. Some of the advantages of using PVC edge banding tape in your home are listed below. When Should You Use PVC Edge Banding Tape? Edge banding is useful for a number of tasks around the house, including: Damaged or missing door casing can be replaced with PVC edge banding. Any window mouldings that look to be cheap should be replaced. Replace the carpets at the base of the baseboards. Simple doors can be made to look more appealing. To acquire an expensive interior designer style, you don't have to spend a lot of money. DIY tasks are a breeze when you use our all-purpose glue (Industrial Strength) for quick and permanent results. The outstanding double-sided tape comes in a large roll that may be used for a number of household tasks. It sticks well to drywall, wood, and other common household materials, so you may use it on almost any surface. Edge banding is a technique for increasing the durability and giving the illusion of a solid or more expensive material by covering the exposed edges of materials such as plywood, particle board, and MDF. Edge banding can be done with face frames or moulding. Edge banding can be made from a variety of materials, including PVC, ABS, acrylic, melamine, wood, and wood veneer. Traditional edge banding was a time-consuming process that required standard carpentry tools and supplies. In current applications, edge banding is applied to the substrate using an automated process that uses a hot-melt adhesive, particularly for high-volume, repeated production methods like cabinet doors. Some of the raw materials used in hot melt adhesives include EVA, PUR, PA, APOA, and PO. A substrate primer can be used as a bonding agent between the adhesive and the substrate. Thicker edge bandings normally require a slight concavity to establish a tight glue line. Thicknesses ranging from.018" to 5mm and beyond are possible. The equipment that applies the edge banding is known as an edge bander. Edge banders apply edge banding to the substrate, trim the leading and trailing edges, flush the top and bottom with the substrate, scrape any surplus, and polish the finished edge. PVC edge banding is the most popular choice for Pressure Laminated and Melamine Cabinets. As modern European cabinetry grows increasingly popular, cabinets with glossy or colourful finishes are becoming more common. PVC (polyvinyl chloride) edge banding is a thermoplastic resin that is both flexible and durable. Colors, textures, and wood grains are generated by blending pigments and other materials, giving edge banding an almost infinite range of colour, texture, and grain options. • The wooden bit isn't compatible with the tabletop or laminates, but the edge band is. • Compared to the hardwood bit, the PVC edge band is substantially less expensive. A hardwood bit's price is measured in running feet, while an edge band's price is measured in running metres. • The E3 edge band softens the edges of furniture. One metre = 3.2 feet. Sharp edges on other covers do not cut or hurt adults or small children. • There are no nails allowed. During bidding, a small portion of the nail may come loose and cause damage to the garments. There is no risk of injury with the E3 edge band because it is a nail-free device. • The least amount of adhesive is used for pasting. • The E3 edge band is more durable than a wooden bit, as well as being 100% recyclable and environmentally friendly. The India edge banding materials market is estimated to develop at an exceptional CAGR of 11% during the assessment period. More investments in India's construction sector, a significant increase in the number of residential building projects, technical advancements, expanded inventiveness in the interior design arena, and increased R&D activities are all contributing to market growth. In order to improve product quality and build a solid footing in the industry, leading players in the current India edge banding materials market are likely to focus on R&D initiatives. The edge banding materials market in India is expected to be valued more than US$ 140 million by 2030. The rapid rise of India's residential construction sector is likely to increase furniture demand. This is expected to increase demand for edge banding materials in India over the forecast period. The growing construction sector, particularly in developing regions such as Asia Pacific, particularly in India, is expected to provide considerable opportunities for current edge banding materials market participants. In growing countries, the residential sector is quickly expanding, resulting in increased demand for edge banding materials.
Plant capacity: PVC Edge Banding Tape(Size 22 mm, 50 mter, 1 mm Roll): 303,030 Meter Per Day	Plant & machinery: 372 Lakhs
Working capital: -	T.C.I: Cost of Project:1383 Lakhs
Return: 30.00%	Break even: 47.00%
Add to Inquiry Basket

Profitable Business of Lithium Ion Battery Pack
Two electrodes are separated by an electrolyte in a lithium ion (li-ion) battery. In almost all lithium-ion batteries, there are three layers: two electrodes (the cathode and anode) separated by a separator layer made of synthetic organic polymer material. The top electrode, the cathode, is negatively charged, while the bottom electrode, the anode, is positively charged. The separator acts as an insulator, preventing charges from freely travelling across the electrodes until electrons are pushed through it by a device or power source from one electrode to the next. A lithium iron phosphate (LFP) battery is a type of lithium-ion battery that can charge and discharge at high rates when compared to other types of batteries. It's a rechargeable battery with a LiFePO4 cathode, hence the name. A variety of properties distinguish lithium iron phosphate batteries, including: • Increased safety • Higher power density • Lower discharge rate • Flat discharge curve • Less heating • More charge cycles Lithium iron phosphate batteries differ from other lithium-ion batteries in that they may deliver a constant voltage and have a longer charge cycle, ranging from 2000 to 3000 cycles. LFP batteries are both environmentally friendly and structurally sound. They have a low energy density and a low discharge rate. In comparison to other batteries, they don't become hot readily and stay cool. Because the battery's composition prevents thermal runaway, it's considered safe for home use. Phosphate-based technology is more thermally and chemically stable than Lithium-ion technology created with other cathode materials, resulting in improved safety. Lithium phosphate batteries are incombustible in the event of charge or discharge mismanagement; they are more stable in overcharge or short circuit conditions, and they can withstand high temperatures without degrading. Lithium Iron Phosphate has a wide range of properties that allow for the production of a wide range of battery sizes, and it has found key applications in the following areas: 1) Large electric vehicles include buses, electric automobiles, tour buses, hybrid vehicles, and other attractions. 2) Light electric vehicles, such as electric bicycles, golf carts, tiny cars, forklifts, and electric vehicle cleaning wheelchairs Power tools include lawn movers, electric saws, and electric drills, to name a few. 4) Toys that can be controlled remotely, such as cars, boats, and planes. 5) Storage solutions for solar and wind energy. 6) Warning lights, UPS, miner's lamp, and other emergency lights 7) Small and portable medical equipment and devices. 8) Cell phones, laptops, camcorders, iPods, and other technological gadgets 9) Lithium ion batteries are used in a number of cutting-edge electric vehicles, notably the first of its kind, the Tesla Roadster. It takes around 3.5 hours to fully charge the 6831 lithium ion cells in this vehicle's batteries, which weigh half a tonne (1100lb). The lithium-ion battery market in India is expected to grow at a CAGR of 34.8 percent from 2019 to 2024. Factors like lowering lithium-ion battery prices and the emergence of new and exciting markets. Electric vehicles and energy storage systems (ESS) for commercial and residential applications are projected to propel the lithium-ion battery industry in India. The lack of major reserves needed for lithium-ion battery production is expected to pose a barrier to local production and the country's lithium-ion battery market. The increased use of electric vehicles in India is projected to enhance the need for Lithium (Li)-ion battery production. The most prevalent type of electrochemical energy storage is lithium-ion batteries. The principal electrolyte component in these rechargeable batteries is Li-ion. Lithium, as well as other minerals like cobalt, aluminium, and copper, must be procured and mined in order to manufacture Li-ion batteries. The Li-ion battery manufacturing process includes the fabrication of cell components (electrodes, electrolytes, and separators), cell and module production, battery pack assembly, and component integration. The Li-ion battery manufacturing industry in India is still in its infancy. However, the country has the potential to become a major producer of Li-ion batteries in the next years. The Li-ion battery manufacturing industry in India can be developed in three stages: stage one (2017 to 2020), stage two (2021 to 2025), and stage three (2020 and beyond) (2020 to 2050). From 2026 to 2030. The country's principal goal for stage one, which runs from 2017 to 2020, is to create a favourable industrial climate.
Plant capacity: Lithium Ion Battery Module Cap. 0.4 KWH 595.2 Module per day \| Lithium Ion Battery Module Cap. 4.8 KWH: 48.8 Module per day \| Lithium Ion Battery Module Cap. 5 KWH: 46.8 Module per day \| Lithium Ion Battery Module Cap. 10 KWH: 23.4 Module per day	Plant & machinery: 36 Cr
Working capital: -	T.C.I: Cost of Project: 50 Cr
Return: 27.00%	Break even: 41.00%
Add to Inquiry Basket

Start Malic Acid (Powder) Production Business
Malic acid, also known as L-malic acid, is a dicarboxylic acid that occurs naturally. D-malic acid, which can be made as a racemic combination of DL-malic acid, is another optically active isomer. Because of its high abundance in apples, malic acid is sometimes referred to as "apple acid." Humans, plants, and animals all create malic acid as part of their metabolic processes. Malic acid provides the carbon skeleton and energy required for amino acid synthesis in the Krebs and glyoxyl atecycles. Malic acid crystallises as white, translucent crystals from aqueous solutions that are anhydrous, non-hygroscopic (under normal conditions), and non-volatile, with a melting temperature of about 130°C. Its initial dissociation constant produces acidic characteristics that are strong enough in solution to provide a large hydrogen ion concentration while remaining mild enough to make an effective buffer solution. Because malic acid is anhydrous and non-hygroscopic, it can be stored for long periods of time in normal conditions without caking. Because of this property, final goods containing Malic Acid, whether in powder or granular form, have a long shelf life. Malic acid has a melting point of around 130°C, which is significantly lower than that of citric acid (153°C). This distinction is very intriguing and significant, particularly in the creation of hard candies. Malic acid has several uses in the culinary sector (beverages, sweets, chewing gums, jellies, jams, frozen confectionary), animal feed (pet food, pig acidifier combinations), metal treatment, metal plating, pharmaceutical and cosmetic industries, and building materials. Because of its buffering capability and ability to augment the efficacy of antimicrobial preservatives, malic acid is becoming more widely employed as a flavour enhancer in both liquid and powder drinks. Malic Acid is widely employed as a substitute for/or in combination with Citric Acid in beverage formulations due to its acidic taste, and so contributes significantly to increasing and strengthening the taste of the fruits tastes used. Because of its low melting point, Malic Acid is preferred over other acidulants in candies and sweets. This is especially important in hard candies, because the acid can easily be absorbed into the cooked syrup on the slab. Also, because the needed temperature is so low, caramelization and sugar inversion can be avoided. Malic acid is also utilised in effervescent and soft candies. Acidulants are used in a variety of desserts, including ices, sherbets, variegated ice creams, jelly dessert powders, milk puddings, and so on. The use of acidulants in the preservation of fruit and vegetables, whether fresh or canned, is critical. The pH of canned fruits and vegetables must be less than 5 during sterilisation in order to apply a light heat treatment (lower temperature and shorter treatment). The global malic acid market is predicted to grow at a CAGR of 5.0 percent from 2020 to 2025, with a market size of USD 182.6 million in 2020. Over the projected period, rising demand from the food and beverage industry to enhance flavour through speciality ingredients is expected to fuel industrial growth. In the coming years, the market is expected to be driven by rising demand for nutritional bars and protein drinks, as well as a growing preference for healthier functional beverages with high nutrient flavours. Furthermore, the market is expected to benefit from support from other regulatory authorities such as the Food Safety and Standards Authority of India (FSSAI) and the European Food Safety Authority (EFSA) over the projected period. Maleic anhydride and fumaric acid, both petroleum products, are the most common raw materials used to make malic acid. In addition, the utilisation of ecologically sustainable innovations such biomass feedstock is a crucial raw material trend that is expected to support industrial growth throughout the forecast period. Furthermore, the FDA's GRAS designation for malic acid is expected to boost commercialization for food-grade applications. Beverages, confectionary and food, and personal care and cosmetics are the three end-use categories in the global malic acid market. Non-carbonated and carbonated beverages, as well as flavoured drinks and alcoholic ciders, are included in the beverages category. The segment held the biggest market share and is expected to grow at a CAGR of 4.6 percent in revenue over the forecast period. The segment also dominated global demand, thanks to rising demand for liquid and powdered beverages, as well as artificial flavorants in carbonated beverages. Due to increase per capita disposable income in Asia Pacific's developing markets, confectionary and food, as well as personal care and cosmetics, are the most popular segments. Due to shifting eating patterns and dietary preferences, the confectionery and food category is expected to grow at a revenue-based CAGR of 5.6 percent over the forecast period. Because of the high demand for malic acid in end uses such as processed foods and hard candies, the segment accounted for a considerable revenue share in North America in 2018.
Plant capacity: 3.3 MT per day	Plant & machinery: 391 Lakhs
Working capital: -	T.C.I: Cost of Project: 1285 Lakhs
Return: 12.00%	Break even: 61.00%
Add to Inquiry Basket

Manufacturing of Ascorbic Acid (Powder) from Sorbitol
Vitamin C, or ascorbic acid, is an essential component that the body cannot make on its own and must get from outside sources in order to stay healthy. Because vitamin C has so many roles, getting enough of it every day can be challenging if you don't know what it does or where to get it. Vitamin C aids in the formation of collagen, strengthens the immune system, aids wound healing, and reduces the risk of some malignancies by neutralising free radicals in the body. As a result, researchers, medical practitioners, and the pharmaceutical and food industries are placing a high priority on detecting and quantifying ascorbic acid in food samples, goods, and nutraceuticals. Indian gooseberry, citrus fruits such as limes, oranges, and lemons, tomatoes, potatoes, papaya, green and red peppers, kiwifruit, strawberries, and cantaloupes, green leafy vegetables such as broccoli, fortified cereals, and their juices are among the best sources of ascorbic acid. Vitamin C (ascorbic acid) is essential for both bodybuilding and illness prevention. The antioxidant activity, the synthesis of protein, tendons, ligaments, and blood vessels, the healing of wounds and formation of scar tissue, the repair and maintenance of cartilage, bone, and teeth, and the helping in the absorption of iron are just a few of the tasks. The antioxidant activity of ascorbic acid (Vitamin C) is one of its most essential qualities. Vitamin C's antioxidant action aids in the prevention of cancer, cardiovascular disease, the common cold, age-related muscle degeneration, and cataract. Vitamin C's antioxidant properties aid in the treatment of cardiovascular disorders. Vitamin C reduces monocyte adherence to the endothelium, improves endothelium-dependent nitric oxide generation and vasodilation, and decreases vascular smooth muscle cell death, all of which help to avoid plaque instability in atherosclerosis. Vitamin C also helps to protect other vitamins (such as vitamin A and vitamin E) from oxidative damage. Vitamin C protects the gums and slows the ageing process. It improves overall physical health by eliminating harmful metals from the body. Vitamin C inhibits cataract formation, making it effective in the treatment of glaucoma. Another major effect of vitamin C is that it aids in protein synthesis. Collagen synthesis is aided by vitamin C. Collagen keeps our skin looking young by preventing wrinkles and making it firm and robust. Organs and other soft tissues are also protected and supported by collagen. Hydroxyproline, one of the amino acids needed to make collagen, can only be formed when vitamin C is present. In 2020, the global Ascorbic Acid market was worth USD 1.09 billion, with a CAGR of 5.0 percent predicted. Ascorbic acid is a powerful natural antioxidant that aids in a variety of metabolic and repair processes throughout the body. Growing awareness of the effectiveness of ascorbic acid in the therapeutic reduction of serum cholesterol levels and different types of cancer, growing demand for fresh leafy vegetable products, and increasing consumption of ascorbic acid to prevent vitamin C deficiency are key factors expected to boost demand for ascorbic acid and dr. The worldwide ascorbic acid market has been divided into two grades: pharmaceutical grade and food grade. Due to rising demand for vitamin C-fortified foods and beverages, rising use of ascorbic acid as a food additive and acidity regulator, and as a key source of vitamin C in supplements, the food grade segment is likely to see considerable revenue growth throughout the forecast period. Many foods are fortified with ascorbic acid to efficiently replace vitamin C content, and food grade ascorbic acid is often used to fortify or add citrus taste to fruit juices, fruit-flavored candies, cured meats, and frozen fruits. Due to increased vitamin C manufacturing, increased investment in R&D activities to develop effective vitamin C supplements, rapidly growing food and beverage industry due to increased focus on functional foods and rapid urbanisation, changing lifestyle and increasing disposable income, and growing demand for vitamin C-enriched cosmetic products, the Asia Pacific market is expected to grow at a CAGR of 5.5 percent during the forecast period.
Plant capacity: Ascorbic Acid (Powder): 8.3 MT Per Day \| Carbon Di-oxide by Product: 11.6 MT Per Day \| Sodium Hydroxide by Product: 7.7 MT Per Day	Plant & machinery: 803 Lakhs
Working capital: -	T.C.I: Cost of Project: 2444 Lakhs
Return: 29.00%	Break even: 48.00%
Add to Inquiry Basket

Sterile Water for Injection. Most Profitable Manufacturing Business to Start.
Sterile Water for Injection (SWFI) is sterile water that has been made free of harmful microorganisms so it can be used as an injection. SWFI is used in both hospitals and doctors’ offices to give injections to patients or to prepare and clean an area before giving an injection. Sterile Water for Injection is sterile, non-pyrogenic water for injection, USP. The pH range is 3.5–7.0 and the osmolality range is 50–300 mOsm/kg (calc). Visit this Page for More Information: Start a Business in Pharmaceutical sector Uses Sterile Water for Injection is indicated for use only as a solvent or diluents vehicle for parenterally administered drugs or solutions and as a source of water for parenteral fluid replenishment after suitable additives are introduced to avoid tonicity of the blood. In some cases, it may be used as a lavage or rinsing agent, but isotonic solutions suitable to the area of exposure are preferred if available. Administered intravenously as a vehicle for drugs, Sterile Water for Injection provides a source of water for parenteral fluid replenishment after proper osmolarity has been achieved. Business Plan: Detailed Project Report on Manufacturing of Sterile Water for Injection Manufacturing process Water, Fillers-Vitamin B2, Glycerol, and Thiamine hydrochloride (Vitamin B1), and other chemicals are utilised in its preparation to produce a more stable product and consistent pharmaceutical grades from batch to batch. It will then be filtered one more using a 0.22m syringe filter before being filled into sterile bottles or bags. It takes around an hour and a half to complete the process. Related Feasibility Study Reports: Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Drug Intermediates, Speciality Chemicals, Raw Materials, Fine and Specialty Chemicals Intermediates, Pharmaceutical Bulk Drugs After being autoclaved at 121°C for 15 minutes, this water becomes sterile. The sterile solution is suitable for usage in hospitals, as well as the food, chemical, and research industries. It can also be used to clear blood samples of pollutants before analysing them with a spectrometer or detecting them with test tubes at dialysis centres and blood testing institutes. Read Similar Articles: Pharmaceutical Industry Market Outlook: The global market for sterile water products is forecast to reach US$ 738.9 million by 2022, growing awareness of sterility and safety in injections will propel market growth over next six years. The rising incidence of infectious diseases and growing geriatric population base globally has resulted in increasing demand for sterile water solutions that can protect patients from unwanted infections and other related ailments post-injections. Read our Books Here: Pharmaceutical, Drugs, Proteins Technology Handbooks India's biotechnology industry comprising biopharmaceuticals, bio-services, bio-agriculture, bio-industry, and bioinformatics is expected grow at an average growth rate of around 30 per cent a y-o-y to reach US$ 100 billion by 2025. The increase of lifestyle diseases in India such as diabetes and heart disease has heightened the demand for medicines. There is a large pool of scientific and research expertise in India, and an enormous population with high incidences of cancer and chronic disease. The shorter recruitment time-frames and lower costs make India an ideal setting for drug development and clinical trials. Watch other Informative Videos: Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Pharmaceutical Bulk Drugs Indian pharmaceutical sector is expected to grow to US$ 100 billion, while medical device market is expected to grow US$ 25 billion by 2025. Pharmaceuticals export from India stood at US$ 20.70 billion in FY20. Pharmaceutical export include bulk drugs, intermediates, drug formulations, biologicals, Ayush and herbal products and surgical. Key Players: • Albert David Ltd. • Amanta Healthcare Ltd. • Chandra Bhagat Pharma Ltd. • Denis Chem Lab Ltd. • Health Biotech Ltd. • Ivy Health & Life Sciences Pvt. Ltd. • Kopran Ltd. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -	Plant & machinery: -
Working capital: -	T.C.I: -
Return: 1.00%	Break even: N/A
Add to Inquiry Basket

Make Profit by Producing Polyester Textured Yarn from Used Pet Bottle. Investment Opportunities in Textile Industry
It is a kind of composite yarn which composed of polyester staple fiber and polypropylene fibers as filament with teflon lubricant. It has higher tensile strength, abrasion resistance, flexibility, dyeing and wearability than similar textile products. They are no chemical substances remaining after recycled production. Our PET material imported directly from Coca Cola bottling factory could guarantee consistent quality too because Coke makes strict control of their PET bottles making procedures! Visit this Page for More Information: Start a Business in Textile Industry Polyester texturised yarn (PET) is a fabric made of polyester, created using a process that combines individual polyester filaments with an elastic, sinuous yarn structure. It is primarily used in carpets. The 'texturising' in its name refers to its fuzzy feel and loops, which resemble twisted tufts of cat's hair or carpet pile; it has also been described as resembling strands of steel wool. PET is primarily made by recycling plastic bottles into polyester fibres. Read Similar Articles: Textile Industry Benefit of Starting Polyester Texturised Yarn from Used Pet Bottle Business Use pet bottle fibre to make Polyester textured yarn. You can create different look, feel and style with unique touch of recycled material. And you don’t have to worry about problems related with pet bottle waste in our ecosystem. It is not only a good choice for running new business, but also a green idea to help keep our environment safe. Besides, it is profitable as well as creative product that your customers are going to love to use. Related Project: Business Plan for Polyester Textured Yarn From Used Pet Bottle This technique creates final fabric that has high aesthetic quality and competitive price when compared with standard textile fabrics. In fact we have observed market acceptance among consumer even before trials are conducted due to its unique appearance resembling hairy or feathery skin or other eco-friendly natural materials. Watch other Informative Videos: Textile Industry Manufacturing Process: Polyester texturised yarn (PET) is prepared by processing PET bottles, which are considered as secondary raw materials. In order to prepare PET yarn from PET bottle, firstly a debundling unit is required for isolating cuttings and removing labels from bottles. After that, bottles are scrapped in a shredder to obtain chopped PET flakes having different sizes. Watch Video: Production of Polyester Textured Yarn from Used Pet Bottle \| Yarn Made From Recycled Plastic Thus obtained flakes of PET are dissolved in hot caustic soda solution so as to get a viscose solution at 12% solids. The resulting polymer melts are collected in cone bottom tank and spun into filaments using state-of-the-art high speed single screw extruder with temperature controlled cooled air. Related Feasibility Study Reports: Textile Bleaching, Dyeing, Printing And Finishing, Textile Auxiliaries Projects Market Outlook: Polyester Yarn market size is expected to gain market growth in the forecast period of 2021 to 2025, with a CAGR of 7.4% in the forecast period of 2021 to 2025 and will expected to reach USD 110580 million by 2025, from USD 83210 million. Polyester is the most desirable and demanded fiber in the textiles industry is owing to its improved physical properties, lower price, versatility, and recyclability, which provides a unique set of benefits incomparable by any other natural or synthetic fibers. The demand for both drawn texture yarn and fully drawn yarn is growing in the textile industry. However, with the development of post-treatment technology and lower cost of fully drawn yarn, it is likely to outsell drawn texture yarn over the next few years. Read our Books Here: Textile Spinning, Processing, Natural Fibers, Natural Dyes, Pigments, Textile Dyes, Pigments, Dye Intermediates, Woollen Spinning, Weaving, Knitting, Dyeing Technology Global polyester yarn market size was valued at USD 10.67 billion in 2021 and is expected to grow at a CAGR of 3.2% during 2021–2025. High demand for polyester from Asia Pacific region primarily from China, India, and Japan has been driving global polyester yarn market growth over next few years. For More Details: - https://bit.ly/3pjGO2I See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -	Plant & machinery: -
Working capital: -	T.C.I: 1
Return: 1.00%	Break even: N/A
Add to Inquiry Basket

Invest in Highway Guard Crash Barrier Industry Start Manufacturing Business of Highway Guard Crash Barrier(Roll Forming with Metal Beam and Galvanizing Plant)
The guardrail system for protecting highways includes a number of different components, including horizontal and diagonal guardrails, end terminals and crash cushions. The main component in highway guardrail systems is a thick post that resembles a small telephone pole. Visit this Page for More Information: Start a Business in Industrial & Engineering Products Industry When damaged, these posts are difficult to remove from roadsides. Therefore, replacing them or parts of them with new units saves money in maintenance and road closures while increasing safety at accident sites. A guardrail, sometimes referred to as a guide rail or traffic barrier, is a railing system placed alongside roads and highways. Read Similar Articles: Engineering Goods Projects Its purpose is to reduce vehicular accidents and fatalities caused by vehicles leaving their lanes or crossing roadways. While guardrails have proven effective at preventing head-on collisions and vehicle rollovers. Watch Video: Manufacturing of Highway Guard Crash Barrier: Roll Forming with Metal Beam and Galvanizing Plant Uses The main use of these installations is to prevent traffic from veering off the road and into oncoming traffic. The guardrails can also help drivers avoid driving into a flooded or shallow area of water, known as hydroplaning. Some of these installations are designed with sensors that activate flashing lights at night, alerting drivers to stay in their lane on curvy roads. They’re also used to manage heavy flow of trucks carrying goods. Related Project: Roll Forming With Metal Beam, Highway Guard Crash Barrier And Galvanizing Plant Thus, these technologies save both time and money for transportation services. These metal barriers come in different types and shapes for varied uses. Highways authorities set up metal barriers made up of straight lines along busy highway routes to protect people from any accidents like collision, head-on collision, rollover, run-off etc., but some metal barricades aren’t installed straight; they curve upwards and contain several alternating sections between short posts along strategic locations such as curves or intersections where an accident is most likely to occur. In addition, these materials have built-in devices that force vehicles away from an intersection if they don’t slow down when approaching too quickly. Traffic officials who plan to erect them first dig trenches around specific areas where metal barriers need to be placed; thereafter, workers place strong steel posts inside each trench. Afterwards, crews pour concrete around each post. Watch other Informative Videos: Industrial & Engineering Products, Manufactured Goods, Mechanical, Automobile, Metal, Metallurgical, Wire, Aluminum, Copper Products, LPG Cylinder Benefits of Starting Highway Guard Crash Barrier The benefits of using a highway guardrail are obvious. It reduces damage to vehicles that have been involved in an accident, and even helps save lives by reducing injuries sustained in a crash. Of course, if you start your own guardrail manufacturing business, you can expect some significant financial perks as well. That’s why many entrepreneurs choose to build their businesses around these crucial traffic protectors. Here are three ways that a guardrail manufacturing company owner can benefit from his or her business. (1) Improve Safety for Drivers – You may not think about safety every day, but it should be near the top of your priority list when you get into business. By selling high-quality guardrails and other safety products, you can help prevent many devastating car accidents and make travel much safer than it would otherwise be. (2) Increase Profits – When people need to replace broken guardrails on roadways throughout their towns, they will often head directly to local retailers like hardware stores. If you instead set up shop as a manufacturer, though, you could snag many customers who might otherwise ignore retail locations. You’ll also likely be able to charge more for your product because of its quality. (3) Provide Additional Services – Many small towns don’t have guardrail manufacturers right in their communities yet. Related Feasibility Study Reports: Industrial & Engineering Products, Manufactured Goods, Industrial Engineering Products. Mechanical, Engineering, Automobile Industries, Metal, Metallurgical, S.S. Utensil, Wire, Aluminum, Brass, Copper Products, LPG Cylinder and Valves Market outlook In the following years, the market for traffic barriers is expected to increase at a rapid pace. Growing infrastructure and investment in construction activities are two major aspects driving the market need for traffic barriers. On highways, concrete and steel traffic barriers are chosen since they limit the number of accidents. Regardless, the benefits of concrete traffic barriers over steel traffic barriers are projected to increase demand for concrete traffic barriers around the world. Better urban planning is required to accelerate urbanisation in Asia Pacific's growing economies. With rising concerns about safety in public locations such as airports, hospitals, schools, and government and business institutions, the need for traffic barriers is expected to increase significantly. Read our Books Here: Steel, Iron, Ferrous, Non-Ferrous Metals With Casting And Forging, Aluminium, Ferroalloys Technology More investment opportunities and a functional transportation network generate growth chances for the traffic barriers industry as cities grow. Furthermore, increasing the vehicle fleet will result in more traffic bottlenecks on the highways as well as random accidents when travelling at high speeds. As a result, the government is likely to install a huge number of road barriers to prevent accidents and crowd management. Furthermore, in the event of riots, traffic barriers can be used to manage traffic, and the same can be used to prevent illegal access at high security bases or priority places such as (government buildings, airports, and so on). For More Details: - https://bit.ly/3K8WTjU See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports #DetailedProjectReport #BusinessIdeas #StartupBusinessIdea #EntrepreneurIndia #NPCSProjects #BusinessConsultant #ProjectReport #Startup #BusinessOpportunity #BusinessPlan #RollForming #Metal #Metalbeam #HighwayGuardCrashBarrier #ManufacturingofHighwayGuardCrashBarrier #ProductionofHighwaySafetyGuardrail #GalvanizingPlant
Plant capacity: -	Plant & machinery: -
Working capital: -	T.C.I: -
Return: 1.00%	Break even: N/A
Add to Inquiry Basket

Blended Energy Dense Food Production Business \| Food Fortification Industry
Energy dense food refers to foods that are lower in calories, high in nutrient and fiber content. The nutrients come from micronutrients and electrolytes that provide people with a boost of energy for their workout or task at hand. Energy dense food is geared towards anyone who works out on a regular basis and needs a convenient source of fuel to provide them with energy throughout their day. Visit this Page for More Information: Start a Business in Cereal Processing Industry Uses Micronutrient fortified food (MFF) is a category of food products that have enhanced quantities of vitamins and minerals. Energy dense foods are foods which have high calorie density per unit weight or volume. Energy dense foods are usually called as weight gainer. Hence, MFF becomes energy dense food for normal individuals by adding energy nutrients to it, thus providing more calories to their body through low-weight dietary products. Read Similar Articles: Cereal Food Processing This helps in treating malnutrition due to less intake of food with required nutrients in some populations where people live on minimal income and has no money to buy nutritious food. Thus, by manufacturing MFFs one can contribute toward healthy society without any extra cost. It will also benefit economically poor people who cannot afford good nutrition but need adequate nutrition like lactating mothers, pregnant women and growing children who need extra calories during critical period of life cycle development. Watch Video:- Food Fortification Business \| Micronutrient Fortified Blended Energy Dense Food Manufacturing Benefits of Starting Micronutrient Fortified Energy Dense Food Business It's a new era of health food, and everyone wants more vitamins in their meals. That is why energy rich foods fortified with micronutrients have become so popular in an increasingly health-conscious market. This industry is growing in popularity, providing chances for entrepreneurs who want to establish themselves as industry leaders and sell high-quality, healthy products to people all over the world. Here are some of the advantages of beginning a micronutrient-fortified, energy-dense food business: • Added Product Value – Those little nutrients that have been lost from our daily diets can be added back into foods, using quality ingredients like brewer’s yeast powder. Your product will be perceived as having extra value simply because it contains added nutrients, making it superior to similar offerings on supermarket shelves. • Cheaper Ingredients – Adding essential vitamins and minerals to your products will not add much cost. You could use cheap, but nutrient-rich grains like barley or rye instead of wheat; use brewer’s yeast or cornstarch instead of sugar; or invest in chlorella which provides several essential nutrients at no additional cost. Related Project: Start Production Business of Micronutrient Fortified Energy Dense Food • There are no risks associated with food storage and transportation - Foods lose freshness with time. However, by supplementing them with vitamins and nutrients, they will live longer. Pickles that have been salt-preserved, for example, last longer than pickles that have not been processed. Because micronutrients extend shelf life, there are fewer risks connected with keeping and shipping these foods because they last so long. • Customers who are happy – Consumers want newer options to be available at all times. You can give them exactly that with micronutrient fortification. What more could a client want for than a wide choice of delightful items created from excellent ingredients and providing optimal nutrition? • Increased Competitiveness - When customers see a healthier choice offered by one company over another, they will respond favourably. This puts pressure on competitors to follow suit, providing your brand an advantage and allowing it to stand out among similar brands. Watch other Informative Videos: Food Processing and Agriculture Based Projects Manufacturing Process: Meal that is high in macronutrients such as fat, carbohydrate, protein, and calories is referred to as energy dense food. Foods that are high in energy keep people content for extended periods of time, preventing them from overeating. Freshness, taste, and a crisp crunchy texture are the most critical characteristics for producing energy packed foods. Another significant element that plays a part in energy dense food is maintaining constant quality. Finally, because presentation is always appealing to customers, creating beautiful packaging for calorie dense meals is also critical. Innovative technologies may be used to produce micronutrient enhanced energy dense foods in a variety of ways. The method chosen will be determined by the amount of micronutrients that should be added to food in addition to normal nutrients like carbs, proteins, and fats. Depending on their needs, manufacturers can use liquid fortification, dry fortification, or frozen fortification processes. When it comes to liquid fortification, adding vitamins and minerals directly to beverages is the most common way. Frozen fortification is most commonly employed in mass processing, when water used to manufacture ice creams, juices, and other products is fortified with critical vitamins and minerals prior to freezing. Nutrients such as vitamins and minerals are added to a solution and then dried at high temperatures in a drying machine for dry methods. Manufacturers can enrich their products with all vital nutrients by adopting appropriate technology for making micronutrient fortified energy dense meals. Related Feasibility Study Reports: Cereal Processing (Rice, Dal, Pulses, Oat, Wheat), Sugar and value added Products and Projects Market outlook The market value is expected to reach US$ 234,253.7 Mn by 2031, with a CAGR of 6.3 percent between 2012 and 2031. Food fortification, or the adding of micronutrients like vitamins and minerals to foods and condiments, has been used by food producers for almost a century. Companies are boosting their food formulations with vitamin and mineral premixes as the present consumer population becomes more aware of the benefits of nutritionally filled foods. Read our Books Here: Cereal Food, Cereals And Cereal Products Processing Industry Throughout the preceding decade, food fortification was defined as the process of adding vitamins and minerals to commonly consumed foods in order to increase their nutritional worth. It's a tried-and-true, safe, and cost-effective way to improve diets and prevent and treat micronutrient deficiencies. As a result of rising consumption of vitamin-enriched meals, the worldwide fortified foods business has seen tremendous expansion in recent years. Throughout the forecast period, rising health concerns and an increase in disease rates will be the primary drivers of the fortified foods market. The market is estimated to grow at a CAGR of 6.3 percent between 2021 and 2031. For More Details: - https://bit.ly/3hANYvg See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -	Plant & machinery: -
Working capital: -	T.C.I: 1
Return: 1.00%	Break even: N/A
Add to Inquiry Basket

Information

One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
One Crore is equivalent to ten million (10,000,000)
T.C.I is Total Capital Investment
We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.
Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 297 of 337 | Total 3361 projects in this category

« Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 297 336 337 Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top

Google Search

Search

Already a Member ?

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

Start Production of Silica from Rice Husk Ash

A Complete Business Plan for Lithium Ion Battery (Battery Assembly)

PVC Edge Banding Tape Manufacturing Business

Profitable Business of Lithium Ion Battery Pack

Start Malic Acid (Powder) Production Business

Manufacturing of Ascorbic Acid (Powder) from Sorbitol

Sterile Water for Injection. Most Profitable Manufacturing Business to Start.

Make Profit by Producing Polyester Textured Yarn from Used Pet Bottle. Investment Opportunities in Textile Industry

Invest in Highway Guard Crash Barrier Industry Start Manufacturing Business of Highway Guard Crash Barrier(Roll Forming with Metal Beam and Galvanizing Plant)

Blended Energy Dense Food Production Business | Food Fortification Industry

About NIIR PROJECT CONSULTANCY SERVICES