Google Search

Search

Already a Member ?

Fuels (Alcohol fuel, Alternative fuels, Biomass, Biofuel, Combustion, Domestic fuels, Energy density, Fossil fuel, Fuel oil, Fuel poverty, Gas fuel, Hydrocarbon, Liquid fuels, Oxidation, Propellant, Solid fuel), Energy development Projects

A fuel is any compound that has stored energy. This energy is captured in chemical bonds through processes such as photosynthesis and respiration. Energy is released during oxidation. The most common form of oxidation is the direct reaction of a fuel with oxygen through combustion. Wood, gasoline, coal , and any number of other fuels have energy-rich chemical bonds created using the energy from the Sun, which is released when the fuel is burned (i.e., the release of chemical energy). Chemical fuels or the fossil fuels are useful reserve of fuels and are therefore used extensively to satisfy the demands of an energy-dependent civilization.

The biofuel business in India is expected to touch 50,000 crore by 2022. The Indian biofuel market has been consistently witnessing growth and developments for past few years. The Government of India is injecting huge amount of money and resources into the development of this sector in an attempt to reduce dependency on imported oil. High volatile oil prices and production levels have further enlightened the need for continuous developments of this sector.

The world petroleum coke market is anticipated to touch a revenue valuation of US$24.11 bn by the end of 2020. On account of environmental concerns and some traits causing pollution, the employment of petroleum coke could be discouraged, thus negatively affecting the demand in the world petroleum coke market. However, the process of gasification of petroleum coke is expected to up profit margins and encourage clean power production.

India's energy demand is set to rise, and hydrocarbons will play a key role in any possible growth scenario. The industry recognizes the potential, and global players are eager to contribute towards India's growth.

 

Reasons for buying our reports:

This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

This report provides vital information on the product like its characteristics and segmentation

This report helps you market and place the product correctly by identifying the target customer group of the product 

This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

The report provides a glimpse of government regulations applicable on the industry

The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

We use reliable sources of information and databases. And information from such sources is processed by us and included in the report


 

 


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 1 of 3 | Total 28 projects in this category
«   Page 1 2 3   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Activated Charcoal From Wood - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Activated wood charcoal is a very important chemical widely employed by certain gases and vapours in purification in catalytic chemical reactions and decolorization of vegetable oils and sugar solutions. Activated wood charcoal is available in diverse forms like symmetrical pellets, irregular shaped granules and in cubical form. Due to expansion of pharmaceutical and vegetable oil industries the demand of activated wood charcoal is expected to rise sharply in the coming years. New entrepreneurs venture in to this field will be successful.
Plant capacity: 15MT/DayPlant & machinery: Rs. 80 Lakhs
Working capital: Rs. 113 LakhsT.C.I: Rs. 262 Lakhs
Return: 24.13%Break even: 62.30%
Add to Inquiry Add to Inquiry Basket

Coconut Shell Charcoal - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

In major importing countries coconut shell charcoal is mainly used in the manufacturing of activated carbon. All the production units are enjoy higher growth rate. The demand for coconut shell charcoal and activated carbon will be increased. There is good market potential for this unit. It also have good export potential. Any new entrepreneur can invest in project. He will get good profit margin as well as good market.
Plant capacity: 1.0 MT/DayPlant & machinery: Rs. 6 Lakhs
Working capital: -T.C.I: Rs. 19 Lakhs
Return: 45.25%Break even: 48.36%
Add to Inquiry Add to Inquiry Basket

Charcoal From Bagasse - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bagasse is one of the major by product of sugar crushing industries. Charcoal is a highly porous form of amorphous carbon. It is one of the half burned bagasse product. Raw material bagasse available in India or throughout the world in the sugar producing countries nearly six to eight months. The technology of charcoal from bagasse is indigeneously available. There is no necessity of import of machinery for the production of charcoal. Charcoal is nothing but the elementary form of carbon. It is divided in to different parts according to its activity i.e. activated carbon or normal carbon. It is used as fuel and as a reducing agent. There are few organized manufacturing units to produce activated carbon. Demand of charcoal is increasing speedily. There is good scope for new entrepreneurs.
Plant capacity: 2.0 MT/DayPlant & machinery: Rs. 53.0 Lakhs
Working capital: Rs. 25 LakhsT.C.I: Rs. 154 Lakhs
Return: 26.41%Break even: 62.20%
Add to Inquiry Add to Inquiry Basket

Coal Washing Unit - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Coal washing unit is one of the most important unit for upgradation of coal in sense of fed value by reducing of ash contents in the coal. It is basically associated with seive position to get the quality coal. It is used as fuel for running the boiler, in domestic use, in thermal power station to produce electricity, for manufacture of coal gas etc. Coal is a important source of chemical raw materials. Being a high demandable item it has very good market. So there is a scope for setting up this unit.
Plant capacity: 11700 MT/DayPlant & machinery: Rs. 3200 Lakhs
Working capital: Rs. 891 LakhsT.C.I: Rs. 7241 Lakhs
Return: 6.36%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Coconut Shell Charcoal - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

In major importing countries coconut shell charcoal is mainly used in the manufacturing of activated carbon. All the production units are enjoy higher growth rate. The demand for coconut shell charcoal and activated carbon will be increased. There is good market potential for this unit. It also have good export potential. Any new entrepreneur can invest in project. He will get good profit margin as well as good market.
Plant capacity: 1.0 MT/DayPlant & machinery: Rs. 6 Lakhs
Working capital: -T.C.I: Rs. 19 Lakhs
Return: 45.25%Break even: 48.36%
Add to Inquiry Add to Inquiry Basket

Jatropha Plantation and Oil Extraction (Used As Bio Fuel) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

Jatropha curcus is a drought-resistant perennial, growing well in marginal/poor soil. It is easy to establish, grows relatively quickly and lives, producing seeds for 50 years. Jatropha the wonder plant produces seeds with an oil content of 37%. The oil can be combusted as fuel without being refined. It burns with clear smoke-free flame, tested successfully as fuel for simple diesel engine. The by-products are press cake a good organic fertilizer, oil contains also insecticide. It is found to be growing in many parts of the country, rugged in nature and can survive with minimum inputs and easy to propagate. Medically it is used for diseases like cancer, piles, snakebite, paralysis, dropsy etc. Jatropha grows wild in many areas of India and even thrives on infertile soil. A good crop can be obtained with little effort. Depending on soil quality and rainfall, oil can be extracted from the jatropha nuts after two to five years. The annual nut yield ranges from 0.5 to 12 tons. The kernels consist of oil to about 60 percent; this can be transformed into biodiesel fuel through esterification. Family: Euphorbiaceae Synonyms: Curcas purgans Medic. Vernacular/common names: English- physic nut, purging nut; Hindi - Ratanjyot Jangli erandi; Malayalam ? Katamanak; Tamil ? Kattamanakku; Telugu ? Pepalam; Kannada ? Kadaharalu; Gujarathi ? Jepal; Sanskrit ? Kanana randa. Distribution and habitat It is still uncertain where the centre of origin is, but it is believed to be Mexico and Central America. It has been introduced to Africa and Asia and is now cultivated world-wide. This highly drought-resistant species is adapted to arid and semi-arid conditions. The current distribution shows that introduction has been most successful in the drier regions of the tropics with annual rainfall of 300-1000 mm. It occurs mainly at lower altitudes (0-500 m) in areas with average annual temperatures well above 20�C but can grow at higher altitudes and tolerates slight frost. It grows on well-drained soils with good aeration and is well adapted to marginal soils with low nutrient content. Botanical Features It is a small tree or shrub with smooth gray bark, which exudes a whitish colored, watery, latex when cut. Normally, it grows between three and five meters in height, but can attain a height of up to eight or ten meters under favourable conditions. Leaves It has large green to pale-green leaves, alternate to sub-opposite, three-to five-lobed with a spiral phyllotaxis. Flowers The petiole length ranges between 6-23 mm. The inflorescence is formed in the leaf axil. Flowers are formed terminally, individually, with female flowers usually slightly larger and occurs in the hot seasons. In conditions where continuous growth occurs, an unbalance of pistillate or staminate flower production results in a higher number of female flowers. Fruits Fruits are produced in winter when the shrub is leafless, or it may produce several crops during the year if soil moisture is good and temperatures are sufficiently high. Each inflorescence yields a bunch of approximately 10 or more ovoid fruits. A three, bi-valved cocci is formed after the seeds mature and the fleshy exocarp dries. Seeds The seeds become mature when the capsule changes from green to yellow, after two to four months Flowering and fruiting habit The trees are deciduous, shedding the leaves in the dry season. Flowering occurs during the wet season and two flowering peaks are often seen. In permanently hu-mid regions, flowering occurs throughout the year. The seeds mature about three months after flowering. Early growth is fast and with good rainfall conditions nursery plants may bear fruits after the first rainy season, direct sown plants after the second rainy season. The flowers are pollinated by insects especially honey bees. Ecological Requirements Jatropha curcas grows almost anywhere , even on gravelly, sandy and saline soils. It can thrive on the poorest stony soil. It can grow even in the crevices of rocks. The leaves shed during the winter months form mulch around the base of the plant. The organic matter from shed leaves enhance earth-worm activity in the soil around the root-zone of the plants, which improves the fertility of the soil. Regarding climate, Jatropha curcas is found in the tropics and subtropics and likes heat, although it does well even in lower temperatures and can withstand a light frost. Its water requirement is extremely low and it can stand long periods of drought by shedding most of its leaves to reduce transpiration loss. Jatropha is also suitable for preventing soil erosion and shifting of sand dunes. Biophysical limits Altitude: 0-500 m, Mean annual temperature: 20-28 deg. C, Mean annual rainfall: 300-1000 mm or more. Soil type: Grows on well-drained soils with good aeration and is well adapted to marginal soils with low nutrient content. On heavy soils, root formation is reduced. Jatropha is a highly adaptable species, but its strength as a crop comes from its ability to grow on very poor and dry sites. A large genus of herbs, shrubs and trees distributed in the tropical and sub-tropical parts of the world, chiefly in Africa and America. About 9 species have been recorded in India; some of them are grown in gardens for their ornamental foliage and flowers. These plants has various uses, one use is as medicinal plant and another use is for extraction of different alkaloids. There is another most important part of the plants i.e. seeds oil. The seed oil can be used as biofuel. The plants are cultivated largely in the South America, France, and Africa. It is cultivated in the rainy season and fruits or seed yielded in the winter season. Leaves and plants are used for the extraction of different alkoloids, which is largely used for the preparation of different medicinal value products. The Jatropha seed available has 94% oil content. Jatropha oil has different use of which it can be used as biofuel. After extraction of oil seed waste can be used for making organic waste. In India it can be largely produced in the Assam, Orissa and Goa hills. As a whole Jatropha cultivation in India may open the new way of medicinal plant cultivation and the new way of starting the sources of bio fuel. Anybody may enter into this field will be successful.
Plant capacity: 24000.00 Kgs/AnnumPlant & machinery: Rs 30 Lakhs
Working capital: Rs 8 LakhsT.C.I: Rs 92 Lakhs
Return: 16.00%Break even: 66.00%
Add to Inquiry Add to Inquiry Basket

Alcohol Based Fuel Gel - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Fuel gel prepared by using basic raw materials like ethyl alcohol, methyl alcohol, sodium stearate, carbopol etc. All the machinery and raw materials are available indigenously. Manufacturing process is almost pollution free. It is generally used in hotels, restaurants and parties. Product has good market demand. There is good scope for export in Bangladesh, Pakistan and Middle East countries. It is found that with the growth of hotels and tourism, demand of fuel gel is increasing around 15% per annum. a new entrepreneur enter in this field will be successful.
Plant capacity: 2 MT/DayPlant & machinery: Rs. 17.00 Lakhs
Working capital: Rs. 73 LakhsT.C.I: Rs. 122.00 Lakhs
Return: 44.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Coal Mining - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Coal is an extremely heterogeneous, complex material that is difficult to characterize. Coal is a rock formed by geological process and is composed of a number of distinct organic entities (macerals) and lesser amounts of inorganic substances (minerals). Each of the coal macerals and minerals has a unique set of physical and chemical properties, there in turn control the overall behavior of coal. Although much is known about the properties of minerals in coal, for example, the crystal chemistry, crystallography, and magnetic and electrical properties, surprisingly little is known about the properties of individual coal macerals. Even though coal is composed of macerals and minerals, it is not a uniform mixture of these substances. Users of coal - In the iron ore extraction plant, Domestic users as fuel sources, different industries using coal fired boiler. The demand of coal mining is increasing. So there exist a great scope for new entrepreneurs to enter in to this field.
Plant capacity: 1350 Lakh MT/Annum (Job Work)Plant & machinery: 752 Crores
Working capital: -T.C.I: 972 Crores
Return: 41.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Calcined Coke (By using Horizontal Kiln) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Petroleum coke is a dark form of carbon, produced from the thermal decomposition and polymerization of heavy liquid hydrocarbons that are derived from crude oil. Petroleum coke is employed for number of purposes, but its main industrial use is in the manufacture of carbon electrodes for the refining of aluminium. There is a large demand of petroleum coke in the metallurgical industry, specially in the steel industry. Around 60% of petroleum coke is being imported and 40% is fulfilled by domestic production. On this basis it is concluded that there is very good scope for this industry.
Plant capacity: 15 MT/DayPlant & machinery: 164 Lakhs
Working capital: -T.C.I: 526 Lakhs
Return: 42.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Petroleum Coke - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

It is dark solid form of carbon, produced from the thermal decomposition and polymerization of heavy liquid hydrocarbons that are derived from crude oil. It is stable, non reactive under normal condition and does not polymerize. It is mainly used in metal production and as a fuel. It is also used as a carbon source in the production of titanium dioxide, various steel alloys and as carbon anode in the production of direct current batteries. Due to its wide range of uses its demand is increasing day by day. The new entrepreneur can enter in this project.
Plant capacity: 30.00 MT/day Plant & machinery: Rs. 271 Lacs
Working capital: -T.C.I: Rs. 1386 Lacs
Return: 49.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 1 of 3 | Total 28 projects in this category
«   Page 1 2 3   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top