REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Tamil Nadu- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Automotive Industry: Project Opportunities in Tamil Nadu

 

PROFILE:

The automotive industry in India is one of the largest in the world and one of the fastest growing globally. India's passenger car and commercial vehicle manufacturing industry is the seventh largest in the world, with an annual production of more than 3.7 million units in 2010. Automotive industry is the key driver of any growing economy. It plays a pivotal role in country's rapid economic and industrial development. It caters to the requirement of equipment for basic industries like steel, non-ferrous metals, fertilisers, refineries, petrochemicals, shipping, textiles, plastics, glass, rubber, capital equipments, logistics, paper, cement, sugar, etc. It facilitates the improvement in various infrastructure facilities like power, rail and road transport. Due to its deep forward and backward linkages with almost every segment of the economy, the industry has a strong and positive multiplier effect and thus propels progress of a nation. The automotive industry comprises of the automobile and the auto component sectors.

 

RESOURCES:

Tamil Nadu is being popularly hailed as “Detroit” of India as it has a large Automobile and Ancillary sector. Automobile industry plays a crucial role in the State economy and has been one of the key driving factors, contributing 8% to State GDP and giving direct employment to 2,20,000 people. More than100 companies in the Automotive and Auto Ancillary industry are located in this state, maintaining highest production norms by implementing internationally recognized quality standards. Chennai has emerged as India's largest automobile and auto components exporter in India. Hyundai has made Chennai the manufacturing and export hub for its small cars. Tamil Nadu has the largest auto components industry base. Currently, Tamil Nadu accounts for above 32% of India's production capacity. Automobile manufacturers operate "Just - in-Time" avoiding inventory costs. The state has a well-developed automotive and auto component industry. It is the hub of Indian automobiles industry. Several automobile and automobile ancillary units are located in Tamil Nadu. It has manufacturing facilities across the automotive spectrum from tractors to battle tanks. Global auto majors like, Hindustan Motors and Mitsubishi have commenced production plants. Ashok Leyland and TAFE have set up expansion plants in Chennai. Fortune 500 companies such as Hyundai and Ford have established manufacturing facilities in the state.

 

GOVERNMENT POLICIES:

Government brought out a very innovative Policy "Ultra Mega Policy for Integrated Automobile Projects" that offers a very attractive package of support to automobile projects investing more than Rs.4000 Crores. As a result of this Policy, since May 2006, investments attracted by Tamil Nadu is automobiles & components manufacturing is Rs.21900 Crores, almost 5 times of the Investments attracted during previous 15 years (May 1991-April 2006). The total employment potential in these new projects is: 1.20 lakhs (direct + Indirect). Govt of India is currently implementing a project "National Automotive Testing R&D Infrastructure Project" (NATRIP) in Oragdam near Chennai at a project cost of about Rs.450 Crores. This project aims at facilitating introduction of world-class automotive safety, emission and performance standards in India as also ensure seamless integration of our automotive industry with the global industry.

 

Textile: Project Opportunities in Tamil Nadu

 

PROFILE:

The textile industry is primarily concerned with the production of yarn, and cloth and the subsequent design or manufacture of clothing and their distribution. The raw material may be natural or synthetic using products of the chemical industry. India Textile Industry is one of the leading textile industries in the world. Though was predominantly unorganized industry even a few years back, but the scenario started changing after the economic liberalization of Indian economy in 1991. The opening up of economy gave the much-needed thrust to the Indian textile industry, which has now successfully become one of the largest in the world.

RESOURCES:

Tamil Nadu has traditional strengths in the textile sector. In the post-quota abolition regime, the Textile Industry has tremendous opportunities for growth as well as challenges to be met. Availability of cotton at fair prices and at right quality, the backlog in modernization, supply of inputs particularly credit and power at reasonable rates etc. are all essential for the textile industry to be competitive in an increasingly uncertain trading environment. The Handlooms, Power looms, Hi-Tech Weaving Parks, Garments & Hosiery, Processing Apparel Park are important components of the textile industry.

GOVERNMENT POLICIES:

 

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The government of India has been following a policy of promoting and encouraging the handloom sector through a number of programmes. Most of the schematic interventions of the government of India in the ninth and tenth plan period have been through the state agencies and co-operative societies in the handloom industries. Some of the major acts relating to textile industry include: Central Silk Board Act, 1948, The Textiles Committee Act, 1963, The Handlooms Act, 1985, Cotton Control Order, 1986, The Textile Undertakings Act, 1995Government of India is earnestly trying to provide all the relevant facilities for the textile industry to utilize its full potential and achieve the target. The textile industry is presently experiencing an average annual growth rate of 9-10% and is expected to grow at a rate of 16% in value, which will eventually reach the target of US $ 115 billion by 2012. The clothing and apparel sector are expected to grow at a rate of 21 %t in value terms.

 

Leather: Project Opportunities in Tamil Nadu

 

PROFILE:

Leather Industry occupies a place of prominence in the Indian economy in view of its massive potential for employment, growth and exports. There has been increasing emphasis on its planned development, aimed at optimum utilisation of available raw materials for maximising the returns, particularly from exports.  The leather and leather products industry is one of India’s oldest manufacturing industries that catered to the international market right from the middle of the nineteenth century. The leather industry employs about 2.5 million people and has annual turnover of Rs. 25,000 crores. India is the third largest leather producer in the world after China and Italy

RESOURCES:

Leather industry in Tamil Nadu is considered to be very ancient and some say it is of more than two centuries old. The state accounts for 70 per cent of leather tanning capacity in India and 38 per cent of leather footwear and components. The exports from Tamil Nadu are valued at about US $ 762 million, which accounts for 42 per cent of Indian leather exports. Hundreds of leather and tannery industries are located around Vellore, Dindigul and Erode its nearby towns such as Ranipet, Ambur, Perundurai, Nilakottai and Vaniyambadi. The Vellore district is the top exporter of finished leather goods in the country. That leather accounts for more than 37% of the country's Export of Leather and Leather related products such as finished leathers, shoes, garments, gloves and so on. The tanning industry in India has a total installed capacity of 225 million pieces of hide and skins of which Tamil Nadu alone contributes to an inspiring 70%. Leather industry occupies a pride of place in the industrial map of Tamil Nadu. Tamil Nadu enjoys a leading position with 40% share in India's export.

GOVERNMENT POLICIES:

Government policies in support of the industry:

• The entire leather sector is now de-licensed and de-reserved, paving way for expansion on modern lines with state-of-the art machinery and equipment

• 100% Foreign Direct Investment and Joint Ventures permitted through the automatic route

• 100% repatriation of profit and dividends, if investments made in convertible foreign currency. Only declaration to this effect to the Reserve Bank is required.

• Promotion of industrial parks (one leather park in Andhra Pradesh, one leather goods park in West Bengal, one footwear park in Tamil Nadu and one footwear components park in Chennai).

• Funding support for modernizing manufacturing facilities 

• Funding support for establishing design studios

• Duty free import of raw materials (namely raw skins, hides, semi finished leather and finished leather) and of embellishments and components under specific scheme

• Concessional duty on import of specified machinery for use in leather sector

• Duty neutralization / remission scheme

Food Processing: Project Opportunities in Tamil Nadu

 

PROFILE:

India is the world's second largest producer of food next to China, and has the potential of being the biggest with the food and agricultural sector. The Indian food processing industry stands at $135 billion and is estimated to grow with a CAGR of 10 per cent to reach $200 billion by 2015. The food processing industry in India is witnessing rapid growth. In addition to the demand side, there are changes happening on the supply side with the growth in organised retail, increasing FDI in food processing and introduction of new products. India's food processing sector covers fruit and vegetables; meat and poultry; milk and milk products, alcoholic beverages, fisheries, plantation, grain processing and other consumer product groups like confectionery, chocolates and cocoa products, Soya-based products, mineral water, high protein foods etc.

RESOURCES:

Tamil Nadu has historically been an agricultural state and is a leading producer of agricultural products in India. In 2008, Tamil Nadu was India's fifth biggest producer of Rice. The total cultivated area in the State was 5.60 million hectares in 2009-10. The state is the largest producer of bananas, flowers, tapioca, the second largest producer of mango, natural rubber, coconut, groundnut and the third largest producer of coffee, sapota, Tea and Sugarcane. Tamil Nadu's sugarcane yield per hectare is the highest in India. Among states in India, Tamil Nadu is one of the leaders in livestock, poultry and fisheries production. Tamil Nadu had the second largest number of poultry amongst all the states and accounted for 17.7% of the total poultry population in India. With the third longest coastline in India, Tamil Nadu represented 27.54% of the total value of fish and fishery products exported by India in 2006.

GOVERNMENT POLICIES:

Tamil Nadu government has come out with following policies :

·         Raise in processed foods in the market from 1% to 10%.

·         Raise value addition levels from 7% to 30 %

·         Food processing industry is one of the growing areas identified for exports. Free Trade Zones (FTZ) and Export Processing Zones (EPZ) have been set up with all infrastructures. Also, setting up of 100% Export oriented units (EOU) is encouraged in other areas. They may import free of duty all types of goods, including capital foods.

·         Capital goods, including spares up to 20% of the CIF value of the Capital goods may be imported at a concessional rate of Customs duty subject to certain export obligations under the EPCG scheme, Export Promotion Capital Goods. Export linked duty free imports are also allowed.

·         Units in EPZ/FTZ and 100% Export oriented units can retain 50% of foreign exchange receipts in foreign currency accounts.

·         50% of the production of EPZ/FTZ and 100% EOU units is saleable in domestic tariff area.

Paper industry: Project Opportunities in Tamil Nadu

 

PROFILE:

Paper Industry in India is riding on a strong demand and on an expanding mood to meet the projected demand of 8 million tons by 2010 & 13 million tons by 2020. The Indian Paper Industry is a booming industry and is expected to grow in the years to come. The usage of paper cannot be ignored and this awareness is bound to bring about changes in the paper industry for the better. It is a well known fact that the use of plastic is being objected to these days. The reason being, there are few plastics which do not possess the property of being degradable, as such, use of plastic is being discouraged. Excessive use of non degradable plastics upsets the ecological equilibrium. The Paper industry is a priority sector for foreign collaboration and foreign equity participation upto 100% receives automatic approval by Reserve Bank of India. Several fiscal incentives have also been provided to the paper industry, particularly to those mills which are based on non-conventional raw material.

RESOURCES:

Tamil Nadu continues to be one of the forerunners in the production of paper and paper products. There are 74 paper mills in operation in Tamil Nadu. The total paper production was 3.7 lakh tonnes in 2005 06 which accounts for 17.30% share of the national production, next only to Andhra Pradesh.  As the country’s forest cover is much below the desired level, the Government of Tamil Nadu established TNPL in 1979 to manufacture newsprint and paper using bagasse (sugarcane waste) as the primary raw material. This is the largest paper mill in India with an installed capacity of 230,000 TPA. Tamil Nadu Newsprint and Papers Limited (TNPL) was established by the Government of Tamil Nadu to produce newsprint and writing paper using bagasse, a sugarcane residue.

GOVERNMENT POLICIES:

Several policy measures have been initiated in recent years to remove the bottlenecks of availability of raw materials and infrastructure development. To bridge the gap of short supply of raw materials, duty on pulp and waste paper and wood logs/chips have been reduced. In the year 1979, Government of Tamil Nadu established Tamil Nadu Newsprint and Papers Limited as a public limited company under the Companies Act, 1956. Commencing production in 1984, with the support of Government of Tamil Nadu, the company has made rapid strides and has emerged as the largest paper mill in India at a single location. With the on-going expansion plan to increase paper production capacity from the present 2.45 lakh tons to 4 lakh tons per annum, TNPL is poised to become a Rs.2000 crores company by 2011-12.

Cement Industry: Project Opportunities in Tamil Nadu

 

PROFILE:

India is the second largest producer of quality cement in the world. The cement industry in India comprises 139 large cement plants and over 365 mini cement plants. Industry's capacity at beginning of the year 2008-09 was 198.30 million tonne (MT) which increased to 219 MT at the close of the year. The initiatives provided by the Government of India to various infrastructure projects, road network and housing activities will provide required stimulus towards the growth of cement industry in India. Domestic demand for cement has been increasing at a fast pace in India & it has surpassed the economic growth of the country.

RESOURCES:

Tamil Nadu is a leading producer of cement in India. It has 13 major cement factories.  It is a home for leading brands in the country such as Chettinad Cements (Karur), Dalmia Cements (Ariyalur), Ramco Cements (Madras Cement Ltd.), India Cements (Sankakari, Ariyalur), Grasim etc. The production of cement in the State increased from 126 lakh tonnes in 2004-05 to 142.89 lakh tonnes in 2005-06 with a growth rate of 13.4% accounting for 10.08 % of cement production at the national level, occupying the 5th place.  However, it may be noted that, the cement production in the private sector has been showing an increasing trend whereas production in the public sector has decreased to 7.85 lakh tonnes from 8.06 lakh tonnes in the public sector for the corresponding period.

GOVERNMENT POLICIES:

Government policies have affected the growth of cement plants in India in various stages. The control on cement for a long time and then partial decontrol and then total decontrol has contributed to the gradual opening up of the market for cement producers. The prices that primarily control the price of cement are coal, power tariffs, railway, freight, royalty and cess on limestone. Interestingly, all of these prices are controlled by government. Cement industry consumes about 5.5bn units of electricity annually while one ton of cement approximately requires 120-130 units of electricity. Power tariffs vary according to the location of the plant and on the production process. The state governments supply this input and hence plants in different states shall have different power tariffs. Another major hindrance to the industry is severe power cuts.

 

Waste management: Project Opportunities in Andhra Pradesh

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

 

RESOURCES:

Municipal Solid Waste (MSW) generation in Chennai, the fourth largest metropolitan city in India, has increased from 600 to 3500 tons per day (tpd) within 20 years. The highest per capita solid waste generation rate in India is in Chennai (0.6 kg/d). Chennai is divided into 10 zones of 155 wards and collection of garbage is carried out using door-to-door collection and street bin systems. The collected wastes are disposed at open dump sites located at a distance of 15 km from the city.  Recent investigations on reclamation and hazard potential of the sites indicate the need for the rehabilitation of the sites.  Chennai is the first city in India to contract out MSWM services to a foreign private agency- ONYX, a Singapore based company. The scope of privatization includes activities such as sweeping, collection, storing, transporting of MSW and creating public awareness in three municipal zones.  ONYX collects about 1100 Metric tons of waste from three zones per day and transports it to open dumps.

 

GOVERNMENT POLICIES:

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 36 of 300 | Total 2993 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 36 299 300   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Glass Sheet-Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Pr

It is difficult to conceive the contemporary architecture without glass. Glass is a non-crystalline amorphous solid that is often transparent and has wide spread practical, technological, and decorative usage in, for example, window panes, tableware, and optoelectronics. Regardless of it being used for windows, facade or interior partitions, glass connects the space, improves the quality of space, transmits sufficient light, and the contemporary types of glass may contribute to energy saving. It is known that energy saving is one of the most important architectonic challenges of our age. The wide variety of architectural glass commercially available coupled with the versatility and creativity one can explore with the material makes the design process exciting and challenging. There are hundreds of glass compositions as well as different coatings, colors, thick-nesses, and laminates, all of which affect the way light passes through the material. Glass is a brittle material and characteristically exhibits compressive strength much greater than its tensile strength. Strengthing techniques most of which involve prestressing to introduce surface compression, have been developed to the paint where glass can be employed it more arudaus environments than previously. Glass sheet is becoming more and more popular in commercial applications as it allows structures to be constructed that give the impression of being outside with the benefits of being inside protected from the elements (with the exception of the sun). Glass is also playing an increasing role in buildings where it provides an attractive and easy to maintain exterior surface. It should be noted that most glass used for this application is subject to a post heat treatment toughening process before use. The glass industry represents a number of definable product segments: (a) flat glass including Float Glass, (b) glass containers and hollowware, (c) vacuum glass, (d) domestic and industrial glassware, (e) crystal glass, (f) fibreglass, (g) glass wool, (h) TV picture tube glass shells, and (i) laboratory glass. Most of the glass products have both industrial and consumer usages. Laboratory glass is a minor constituent. So are fibreglass and glasswool - although fibreglass is gaining momentum increasingly. The two main entrants in the glass industry in the recent years have been Float Glass (a technological variant of flat or sheet glass) and crystalware. Fibreglass and glass wool are still a small turnover industry but has been operating in India for quite some time. Float Glass is a capital intensive process and the minimum economic size calls for a large investment. The segment witnessed the creation of large capacities in a very short time. The demand for float glass witnessed a phenomenal growth due to the comparative product quality at a relatively acceptable price. India exports about 13,000 tonne of glass per month to the Middle East, African countries, Europe and South America. The rapid increase in the demand for flat glass in the domestic market has resulted in a cutback in exports by as much as 60% in the last couple of years.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under Asahi India Glass Ltd. Atul Glass Inds. Ltd. Auroplast India Ltd. Cherry Fashions Ltd. Float Glass India Ltd. Gobind Glass &Inds. Ltd. Gold Plus Glass Industry Ltd. Gujarat Borosil Ltd. Gujarat Guardian Ltd. H N G Float Glass Ltd. Haryana Sheet Glass Ltd. I A G Co. Ltd. Mahalaxmi Dyes & Chemicals Ltd. Saint-Gobain India Pvt. Ltd. Saint-Gobain Sekurit India Ltd. Triveni Glass Ltd.
Plant capacity: Glass Sheet: 1000500 Sq.Mt/annumPlant & machinery: 919 lakhs
Working capital: -T.C.I: Cost of Project: 1742 lakhs
Return: 14.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

MIG Welding Wire - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

MIG Wire is Copper coated strong wire. MIG wires are applied to weld numerous ferrous and non-ferrous materials and give sound results Solid copper coated welding wire for welding in gas shielding atmospheres. The high silicon contents and manganese alloyed in this wire. The higher contains of silicon and manganese increases the yield stress and tensile strength of weld metal. The high silicon content promotes a low sensitivity to surface impurities and contributes to smooth weld. Suitable for welding unalloyed and low alloyed construction steels with tensile strength below 640N/mm2 like boiler plate, fine–grained steels, pipe steels, shipbuilding steels and cast steels. MIG copper coated welding wire has excellent synthetic technological properties when corresponding welding flux is used, with a higher deposition efficiency, high quality and low intensity of labor. Wire diameter: 2.0mm, 2.5mm, 3.2mm, 4.0mm, 5.0mm.The use of wire makes MIG process a rapid one as compared to other welding processes. It is used in pressure Vessels, Heat Exchangers (Stainless Steel, Duplex Stainless Steel, carbon steel), Cryogenic (low temperature) as well as High temperature applications, automotive parts, transport Industries, copper base alloys and Nickel base alloys and Shipbuilding industry. The market for welding segment is divided into welding equipment and consumables in the ratio of 1:3. The welding market is divided between manual metal arc welding and automatic and semi-automatic equipment again in the ratio of 3:1. More than half of the market is in the organised sector. The welding machinery and electrodes market is basically served by two leading players, Advani-Oerlikon and Esab with sizable contributions from Ewac Alloys and Modi Industries. Indal and Ahura are other major players. New entrants in the industry are the MNCs: D&H Welding, Levicon Electric (USA), and Hyundai Corp of South Korea. Due to rapid growth of Industrial activities in Large/Medium and Small Scale Sector, the demand of mig welding Wire is in increasing order as the product is consumable.The product is widely demanded by railways, Ship building, chemical fertilizer, cement, petrochemical industries. There is demand in production of water pipe line also. The advantages of S A AND MIG welding is lesser labour cost, lesser rejection and perfect welding, hence the market.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under Ador Welding Ltd. B M W Ventures Ltd. D & H India Ltd. Dwekam Electrodes Pvt. Ltd. Esab India Ltd. Ewac Alloys Ltd. Indian Steel & Wire Products Ltd. Orde Industries Ltd. Superon Schweisstechnik India Ltd. Victor Electrodes Ltd. Weld Alloy Products Ltd.
Plant capacity: MIG Welding Wire : 12000 MT/annumPlant & machinery: 921 lakhs
Working capital: -T.C.I: Cost of Project: 2052 lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Baby & Adult Diaper & Sanitary Pads - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. When diapers become soiled, they require changing; this process is often performed by a second person such as a parent or caregiver. Diapers are primarily worn by children who are not yet potty trained or experience bedwetting. However, they can also be used by adults with incontinence or in certain circumstances where access to a toilet is unavailable. These can include the elderly, those with a physical or mental disability, and people working in extreme conditions such as astronauts. It is not uncommon for people to wear diapers under dry suits. Sanitary napkins are designed to absorb and retain menstrual fluid discharges. When used they are applied inside an undergarment with a press-on adhesive fixing strip. Over the next few decades, the disposable diaper industry boomed and the competition between Procter & Gamble's Pampers and Kimberly Clark's Huggies resulted in lower prices and drastic changes to diaper design. They have helped many families with low income to get diapers needed for their babies. Several improvements were made, such as the use of double gussets to improve diaper fit and containment. Today, the global market for absorbent hygiene products is over US $ 50 bn (including wipes).Further, a research report by RNCOS, “Indian Baby Care Market Analysis”, found that the market of disposable diapers is growing at snail pace compared to other segments of the baby care market.Many established brands, such as P&G, Kimberly-Clark, and Nobel hygiene are continuously adopting steps to grab more and more market share in this huge untapped market. Further research reveals that the Indian baby care market has substantially grown over the past few years and caught the attention of many international players. India's total personal hygiene market for women, spurred by a Government campaign to promote sanitary napkins among adolescent girls, is expected to reach Rs 2,000 crore by 2018, says a study.At present the production of about 900 mn pieces are manufactured in India and rest are imported. Total women in the age group of 15 - 54 years in India are about 300 mn. Total menstrual periods/year is 13 that last for 4 - 8 days and an average of 3pieces/day is used. Then consumption would be 58, 500 mn pieces/year. Present consumption is 2,659 mn pcs, i.e., 4.5% penetration while in Europe and USA it is well above 73 to 92%. Hence a growth rate well above 18 to 20% is expected in India. The Indian market is quite huge and as per reports available only 35% of India's requirement is manufactured in India, as of now. A huge market, great potential and excellent profit margin is envisaged in manufacturing of sanitary napkins in India. The Indian disposable diaper market is currently pegged at nearly Indian Rupees (Rs) 700m ($17.4m, E12.6m) and 30,000 tonnes/year, and is estimated to grow between 5-10% annually. It comprises brands like Huggies (60% market share) and Pampers (30%) from multinationals Kimberly Clark and Procter & Gamble, respectively. Domestic consumer products major Godrej's Snuggy is the third-largest brand of diapers in the Indian market, with a 10% share.As a whole there is a good scope for entrepreneurs for investment. Few Indian Major Players are as under Carewell Hygiene Products Ltd. Diapers India Ltd. Godrej Hygiene Products Ltd. Gufic Biosciences Ltd. Johnson & Johnson Ltd. Kimberly Clark Lever Pvt. Ltd. Procter & Gamble Hygiene & Health Care Ltd. Regency Diaper Inds. Ltd. Softouch Hygiene Products (Mkt) Ltd. Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: Baby Diapers : 3000000 Pkts/annum Adult Diapers : 1500000 Pkts/annum Sanitary Napkins : 4500000 Pkts/annumPlant & machinery: 1029 lakhs
Working capital: -T.C.I: Cost of Project: 1657 lakhs
Return: 29.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Thermocol Cups, Plates & Glasses - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Thermocol has a particular characteristic: it gives the hand a sensation of velvety softness not experienced in contact with traditional types of plastic. Until recently Thermocol has been employed almost exclusively in the packing and thermoacoustic isolation sectors; utilizing new processes and sophisticated equipment has been possible to create containers for foods with a perfect retention of liquids. The disposable plastic cups, glass, plates and bowls are manufactured by thermoforming technique. They are fast replacing conventional cups, glass, plates and bowls. Ice-cream and other dairy products are packed in disposable cups. Besides Ice-cream industry, hotels, restaurants, canteens etc. have been increasingly using disposable items as against conventional glass-wares or ceramic cups, glass, plates and bowls. Thermocol plates, glass and cups making business is one kind of business which can never go out of date. As long as people celebrates various occasions thermocol plates, glass and cups business can never comes down. During occasions like marriages, birthday parties, festivals, social gatherings, and other parties these disposable items play very important role. Demand for foodservice disposables in the market is projected to increase 3.9 percent per year to $21.9 billion in 2019. Packaging will remain the most common product segment and will outpace service ware, napkins and other foodservice disposables. Retail and vending will be the fastest growing market, while eating and drinking places will remain dominant.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Shalimar Pack (Group of Companies) • Biopac India Corporation Limited • Windsor Industries Private Limited • Essel Kitchenware Ltd • Siliguri Poly Products Pvt. Ltd.
Plant capacity: Thermocol Cups: 108,000 Th.Pcs/Annum Thermocol Glasses: 108,000 Th.Pcs/Annum Thermocol Plates: 21,600Th.Pcs/AnnumPlant & machinery: Rs. 69 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 211 lakhs
Return: 28.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Foil -Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchen ware to electric conductors and from railway wagon to Appollo spacecraft. Because of its intrinsic and versatile properties of lightness, strength to weight ratio, corrosion resistance, electrical and thermal conductivity, non toxicity etc., a wide range of uses has opened up for this metal. Foil is a very thin sheet of rolled aluminium supplied in its pure form ('commercial purity') or in a variety of alloys and tempers which give a wide choice of tensile properties. The thickness of foil ranges from the thinnest currently produced commercially at about 0.0065 mm (or 6.5 µm) to the defined upper limit of 0.2 mm (or 200 µm).India is one of the key producers of aluminium foil in the region. Over 70% of aluminium foil used in India is for packaging applications. Pharmaceuticals followed by beverages, personal care and a wide range of food and non-food products, semi rigid containers and house foil are the principal applications of aluminium foil in India in the packaging sector. The total aluminium foil production in India is placed at around 35,000 tonne, of which Indal and India Foils account for a little over 50%. Indal is the biggest aluminum foil manufacturer in the country.Aluminum foil industry is growing annually at around 7%. In the near future, with the phenomenal rise in disposable incomes, the foil industry is expected to receive a boost. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Amco India Ltd. • Annapurna Foils Ltd. • Archer Metal Ltd. • Biopac India Corpn. Ltd. • Ess Dee Aluminium Ltd. • Flex Art Foil Ltd. • Green Pack Foils Pvt. Ltd. • Hindalco Industries Ltd.
Plant capacity: Household, Food Packaging: 3,000 MT/Annum Grade Aluminium Foil Pharmaceutical Grade Printed : 1,500 MT/Annum Laminated Aluminium Foil Insulation Grade Aluminium Foil: 1,500 MT/Annum Plant & machinery: Rs. 1340 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 2717 lakhs
Return: 27.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Dairy Farming with Breeding and Dairy Products - Cattle Breeding Farm, Fodder, Livestock Farming, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study

Dairy farming has been part of agriculture for thousands of years, but historically, it was usually done on a small scale on mixed farms.But today, India derives nearly 33% of the gross Domestic population from agriculture and has 66% of economically active population, engaged in agriculture. The share of livestock product is estimated at 21% of total agriculture sector. Milk production alone involves more than 70 million producers, each raising one or two cows/buffaloes primarily for milk production.Milk is used as a food. It is used prepare curd, butter, ghee cream and ice cream etc. In addition to milk, the manure from animals provides a good source of organic matter for improving soil fertility and crop yields. The gobar gas from the dung is used as fuel for domestic purposes as also for running engines for drawing water from well. In Hinduism, cow urine has a special significance as a drink. Sprinkling of cow urine is said to have a spiritual cleansing effect as well. Gomutra is not a toxic waste material. 95% of it is water, 2.5% consists of urea, and the remaining 2.5% is a mixture of minerals, salts, hormones and enzymes. Dairy farming from being traditional family run businesses today has grown hugely to an organized dairy industry with technological specializations in every part of the process.There has been tremendous growth in dairy farming equipment that helps modern dairy farms to manage thousands of dairy cows and buffaloes. This huge boost in the industry has created a lot of farming jobs for the people.The demand for quality dairy products is rising in all over the world specially in developing countries, therefore to improve quality of milk and dairy product Indian dairy Industry needs to identify and address quality related problems at every stage from the producer at the village cooperative, to the dairy plant and the process of final delivery to the consumer.As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Amrut Industries Ltd. • Anmol Dairy Ltd. • Britannia Industries Ltd. • G R B Dairy Foods Pvt. Ltd. • Haryana Milk Foods Ltd. • Indiana Dairy Specialities Ltd. • Industrial Progressive (India) Ltd. • Mahaan Foods Ltd. • Milkfood Ltd. • Nikumbh Dairy Products Ltd.
Plant capacity: Milk: 1,800,000 Ltrs/Annum Curd : 360,000 Ltrs /Annum Butter Milk: 345,600 Ltrs /Annum Cheese: 36,000 kg /Annum Ghee: 14,400 Plant & machinery: Rs. 581 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 2047 lakhs
Return: 25.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Virgin Coconut Oil

The coconut is the most extensively grown and used nut in the world and the most important palm. The export of coconut and coconut products from India increased by 10.50 per cent to `1450.24 crore in 2015-2016. The increase in quantity exported of desiccated coconut, coconut oil and activated carbon when compared to previous year was 63, 23 and 13 per cent respectively. There are greater prospects for exports of coconut oil, virgin coconut oil and desiccated coconut from India in 2016-17 as the prevailing domestic price is less when compared to the international market.Virgin coconut oil (VCO) is growing in popularity as functional food oil and the public awareness of it is increasing. It is expected that VCO will experience a dramatic growth in the market. The growing demand for virgin coconut oil (VCO) in the international market is expected to directly benefit coconut farmers in the State, with the Coconut Development Board (CDB) initiating steps to help local farmers set up their own large-scale VCO units.The demand for VCO in the international market has increased considerably. In 2013-14, the export of VCO was Rs 5 crore, which increased to Rs 25 crore in 2014-15. This year, we estimate that VCO exports from India would touch Rs 75 crore.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Andhra Pradesh State Civil Supplies Corpn. Ltd. • ConfroAgros Ltd. • Diligent Industries Ltd. • K P L Oil Mills Pvt. Ltd. • Prima Industries Ltd. • Raj Oil Mills Ltd. • Sambandam Solvent Extraction Ltd.
Plant capacity: 720 MT/AnnumPlant & machinery: Rs. 15 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 171 lakhs
Return: 29.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Precipitated Silica from Rice Husk Ash - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Rice milling generates a byproduct known as husk. This surrounds the paddy grain. During milling of paddy about 78 % of weight is received as rice, broken rice and bran.Rest 22 % of the weight of paddy is received as husk. This husk is used as fuel in the rice mills to generate steam for the arboiling process. This husk contains about 75 % organic volatile matter and the balance 25 % of the weight of this husk is converted into ash during the firing process, is known as rice husk ash (RHA). This RHA in turn contains around 85 % - 90 % amorphous silica.Precipitated silica is used as filler for paper & rubber as a carrier & diluents for agricultural chemicals, as an anti-caking agent, to control viscosity & thickness and as a cleansing agent in toothpastes & in cosmetics.Precipitated silica, along with fumed silica, silica sol, and silica gel, is a part of the global specialty silica market. This market is expected to exhibit positive single-digit growth through 2018 and reach a valuation of US$ 7 Bn by 2018. Precipitated silica market, which accounts for around 70% of the global speciality silica market, is also expected to witness steady growth in the next three years. The rising demand for energy efficient products in the automotive industry has resulted in the rapid growth of the global precipitated silica market.The growing toothpaste industry is also a major driver of the global precipitated silica market as precipitated silica is used as a thickening agent it the formulation of toothpaste.As a result of these factors, the global precipitated silica market is expected to expand at a 5.5% CAGR between 2015 and 2023.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • 20 Microns Ltd. • Bharucha Stone & Sand Works Pvt. Ltd. • Insilco Ltd. • Integrated Glass Materials Ltd. • Kiran Global Chems Ltd. • Mines & Rock Products (India) Pvt. Ltd. • Passary Minerals Ltd. • SonalSil-Chem Ltd.
Plant capacity: Precipitated Silica: 3,000 MT/Annum Activated Carbon (by product): 810MT/Annum Sodium Carbonate (by product): 1,200MT/AnnumPlant & machinery: Rs. 526 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 786 lakhs
Return: 27.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Jeans Manufacturing Unit - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Jeans are trousers, a type of garment, typically made from denimor dungareecloth. They come in many styles and colors. Jeans are dyed in every color of the rainbow.There are several advantages associated with denim jeans, which emerge when the denim jeans are compared with other types of clothing. It is on the basis of this advantage that people often opt to buy the denim jeans rather than other varieties of clothing (even when some of those others are considerably cheaper).One of those advantages of denim jeans over other types of clothing is in the fact that denim jeans tend to be highly durable. In India most of the denim manufacturers focus on the domestic markets as the value realisation remains higher in domestic market than in export markets.In the recent times the industry has witnessed entrance of new fabric manufacturers which is expected to make the market for denim fabric more price competitive in the coming years. The current domestic demand for denim is estimated at around 400mnmtrs,growing annuallyat around 13.5%. Although there is a slack in the market, it is still expected to grow at nearly 10% annually. The demand is projected to grow to 1,180 mnmtr in 2024-25.Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Aarvee Denims & Exports Ltd. • Arvind Lifestyle Brands Ltd. • Ashapura Garments Ltd. • Citi Global Finance Ltd. • Cotton County Retail Ltd. • Everblue Apparel Ltd. • Koutons Retail India Ltd. • Monarch Apparels (India) Ltd. • P J L Clothing (India) Pvt. Ltd. • Spykar Lifestyles Pvt. Ltd.
Plant capacity: Readymede Garment (Jeans) : 120,000 Pcs/AnnumPlant & machinery: Rs. 35 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 415 lakhs
Return: 25.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Red Oxide Zinc Chromate Primer - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted. Zinc chromate and red oxide are two pigments that are commonly used in metal primers. Zinc chromate provides more corrosion resistance than red oxide, although red oxide is excellent for exposure to sunlight and exterior exposure. Concerned about corrosion, zinc chromate will give better corrosion resistance. The Indian paint industry has been growing at an average 15% per annum over the last decade. Growth has been consistent with the Indian GDP growth rate and in some years the industry has grown at a rate of 1.5 to 2 times higher than that of GDP growth. Construction remains the key growth sector and is driving demand for decorative and protective coatings. The sector accounts for nearly 45% of the total national investment in infrastructure and the trend is expected to continue in the future. Future market growth is expected to be in the order of 11% p.a. overall, with individual segments displaying a broader range of growth rates across the two main segments. Demand for coatings is expected to reach 3,723,500 tonnes in 2016, mainly due to impressive growth in the construction, automotive and electronic appliance (white goods) industries. As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product. Few Indian Major Players are as under • A P Coatings Ltd. • Addisons Paints & Chemicals Ltd. • American Paints (India) Ltd. • Arofine Polymers Ltd. • Asian Paints Indl. Coatings Ltd. • Asian Paints Ltd. • B J N Paints India Ltd. • Berger Becker Coatings Pvt. Ltd. • Berger Paints India Ltd. • Kansai Nerolac Paints Ltd. • Surface Coating (India) Ltd. • Shalimar Paints Ltd. • Valspar (India) Coatings Corpn. Pvt. Ltd.
Plant capacity: 360,000Ltrs/AnnumPlant & machinery: Rs. 13 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 42 lakhs
Return: 30.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 36 of 300 | Total 2993 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 36 299 300   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top