Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 20 of 248 | Total 2480 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 20 247 248   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Aluminium Foil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchen ware to electric conductors and from railway wagon to Appollo spacecraft. Because of its intrinsic and versatile properties of lightness, strength to weight ratio, corrosion resistance, electrical and thermal conductivity, non toxicity etc., a wide range of uses has opened up for this metal. Aluminium as a packaging material is unmatched owing to its light weight, hygienic and non-contamination which eventually results in longer shelf-life of end products. Aluminium foil is a thin sheet of metal. As such it can be an absolute barrier to moisture, gases, odors, bacteria and moulds. The high reflectivity of aluminium ensures good protection against radiant heat, whilst its opacity is important in preventing deterioration of a very large range of foods and drinks which are affected by light. It is used for packaging and non packaging uses. The growth of this industry has been in the recent past, owing to the growing application of foil in a variety of products. India is one of the key producers of aluminium foil in the region. Over 70% of aluminium foil used in India is for packaging applications. Pharmaceuticals followed by beverages, personal care and a wide range of food and non-food products, semi rigid containers and house foil are the principal applications of aluminium foil in India in the packaging sector. Indai is the biggest aluminium foil manufacturer in the country. Other major manufacturers include India Foils, Emco, PG Foils and Flex Art. Holding on to the emerging indicators and the future prospects, Hindalco has plans to increase its aluminum smelting capacity three-fold to 1.8 mn tonne and alumina refining capacity four-fold to 6 mn tonne annually. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: 6 MT/DayPlant & machinery: Rs 58 Lakhs
Working capital: -T.C.I: Cost of project: Rs 312 Lakhs
Return: 28.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

MEDIUM DENSITY FIBERBOARD- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include particle board, medium-density fiberboard, and hardboard. Fiberboard, particularly medium-density fiberboard (MDF), is heavily used in the furniture industry. Fiberboard is also used in the auto industry to create free-form shapes such as dashboards, rear parcel shelves, and inner door shells. Fiberboard has many benefits and is used in residential and commercial construction. Different uses and applications include: sound proofing/deadening,structural sheathing,low-slope roofing, and Sound deadening flooring underlayment.MDF is generally cheaper than plywood. MDF does not contain knots or rings, making it more uniform than natural woods during cutting and in service.However, MDF is not entirely isotropic, since the fibres are pressed tightly together through the sheet. Typical MDF has a hard, flat, smooth surface that makes it ideal for veneering, as there is no underlying grain to telegraph through the thin veneer as with plywood. A so-called "Premium" MDF is available that features more uniform density throughout the thickness of the panel. MDF may be glued, doweled or laminated. Typical fasteners are T-nuts and pan-head machine screws. Smooth-shank nails do not hold well, and neither do fine-pitch screws, especially in the edge. Special screws are available with a coarse thread pitch, but sheet-metal screws also work well. Like natural wood, MDF may split when woodscrews are installed without pilot holes. Indian particle board and plywood industry dates back to the First World War. It has come a long way having grown nearly six-fold since its inception. The large producers account for 15% of the total production, producing some 38 mnsqm of plywood and blockboards.There are several SSI units and other informal sector units contributing around 60% of the total production. The Indian market for particle board and plywood is estimated in value terms, at over Rs. 37 bn. Of the total market, particle board including medium density fiberboard (MDF) accounts for nearly a quarter of the market. Nearly 85% of the particle board is supplied by the organized sector. Western India has emerged as the leader in the particle board segment. India organized furniture industry is estimated at around USD 8 bn and expected to grow at a CAGR of over 25% annually. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Bajaj Eco-Tec Products Ltd. • Best Board Ltd. • Century Plyboards (India) Ltd. • Greenply Industries Ltd. • Mangalam Timber Products Ltd. • Nuchem Ltd. • Shirdi Industries Ltd.
Plant capacity: 400CBM/dayPlant & machinery: 6866 lakhs
Working capital: -T.C.I: Cost of Project: 9559 lakhs
Return: 27.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Particle Board (Wood Base)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Particle Boards are a relatively new type of engineered wood product.It is cheaper, denser and more uniform than conventional wood and plywood. The main advantage of particle board over solid wood or plywood is that its cost is very low. Compared to plywood furniture of similar dimensions, particle board furniture costs less than half. Particle boards are machine manufactured to desired dimensions, and thus standard pieces of furniture can be mass-produced using these boards. This further brings down the costs since there is no carpenter work involved. This also means ready-to-buy products for customers with zero waiting time. Particle boards are very light in weight, and hence furniture made from these boards is relatively easy to transport and move around. However, particleboard can be made more attractive by painting or the use of wood veneers onto surfaces that will be visible. The resin bonded fibre and particle board industry is of recent origin in India. A number of project proposals have been approved for setting up particle board and MDF board units. The additional approved capacity for particle board is 282,500 TPA and for MDF is 350,000 TPA. There are no proposals for setting up additional hard board and insulation board manufacturing units. The production of hard board and insulation board has been stagnant during the period 1975 to 1990. Particle board registered a growth of 51.5% whereas production of MDF increased by 128% in the same period. Particle board manufacturing technology based on wood and wood wastes is well absorbed in the country. Most of the existing plants have developed the necessary expertise to utilise conventional wood species for production of particle board. However, major items of plant and machinery are being imported for plants of capacities higher than 20 TPD. Indigenisation to the extent of 20-25% has been achieved for the latest plants being set up. So far the sporadic individual efforts by the industry have been inadequate to create sufficient demand growth. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Archidply Industries Ltd. • Associate Decor Ltd. • Bajaj Eco-Tec Products Ltd. • Bajaj Hindusthan Sugar Ltd. • DarshanBoardlam Ltd. • Ecoboard Industries Ltd. • Genus Paper Products Ltd. • Jolly Board Ltd. • Kitply Industries Ltd. • Madras Chipboard Ltd. • Novopan Industries Ltd. • Nuboard Manufacturing Co. Ltd. • Oriental Veneer Products Ltd. • Rushil Decor Ltd. • Shirdi Industries Ltd. • Western India Plywoods Ltd.
Plant capacity: 600Nos/dayPlant & machinery: 452 lakhs
Working capital: -T.C.I: Cost of Project: 1066 lakhs
Return: 25.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Medium Density Fiberboard (MDF)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Medium-density fibreboard (MDF) is an engineered wood product made by breaking down hardwood or softwood residuals into woodfibres, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure.MDF is generally denser than plywood. It is made up of separated fibres, but can be used as a building material similar in application to plywood. It is stronger and much denser than particle board. It can be finished to a smooth surface and grain printed, eliminating the need for veneers and laminates. Most of the thicker MDF panels (1.27 to 1.91 centimeters [cm]) (1/2 to 3/4 inch [in.]) are used as core material in furniture panels. Medium density fiberboard panels thinner than 1.27 cm (1/2 in.) typically are used for siding. MDF does not contain knots or rings, making it more uniform than natural woods during cutting and in service. However, MDF is not entirely isotropic, since the fibres are pressed tightly together through the sheet. Typical MDF has a hard, flat, smooth surface that makes it ideal for veneering, as there is no underlying grain to telegraph through the thin veneer as with plywood. A so-called "Premium" MDF is available that features more uniform density throughout the thickness of the panel. MDF may be glued, doweled or laminated. Typical fasteners are T-nuts and pan-head machine screws. Smooth-shank nails do not hold well, and neither do fine-pitch screws, especially in the edge. Special screws are available with a coarse thread pitch, but sheet-metal screws also work well. Like natural wood, MDF may split when woodscrews are installed without pilot holes. Indian particle board and plywood industry dates back to the First World War. It has come a long way having grown nearly six-fold since its inception. The large producers account for 15% of the total production, producing some 38 mnsqm of plywood and block boards.There are several SSI units and other informal sector units contributing around 60% of the total production. The Indian market for particle board and plywood is estimated in value terms, at over Rs. 37 bn. Of the total market, particle board including medium density fibreboard (MDF board) accounts for nearly a quarter of the market. Nearly 85% of the particle board is supplied by the organized sector. Western India has emerged as the leader in the particle board segment. India organized furniture industry is estimated at around USD 8 bn and expected to grow at a CAGR of over 25% annually. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bajaj Eco-Tec Products Ltd. • Best Board Ltd. • Century Plyboards (India) Ltd. • Greenply Industries Ltd. • Mangalam Timber Products Ltd. • Nuchem Ltd. • Shirdi Industries Ltd.
Plant capacity: 300CBM/dayPlant & machinery: 3511 lakhs
Working capital: -T.C.I: Cost of Project : 6613 lakhs
Return: 27.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

High Tensile Wire Used in Prestressed Concrete Poles and Railway Sleepers - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

High tensile wires are those which can withstand great strain without breaking or becoming deformed. High tensile wire is made with higher carbon steel. The increased carbon content increases the wire’s strength and elongation. As the carbon percentage content rises, steel has the ability to become harder and stronger through heat treating; however, it becomes less ductile. Regardless of the heat treatment, a higher carbon content reduces weldability. In carbon steels wire, the higher carbon content lowers the melting point. It has high strength, adequate ductility, Bendability, which is required at the harping points and near the anchorage, low relaxation to reduce losses and minimum corrosion. High tensile wire for pre-stresses in concrete structure by virtue of improved proportional limit, higher ductility combines with higher strengths. High Tensile Wires are used in Pre-stressed Concrete Industry, large bridges, Flyovers, Ports and Road Dividers. High tensile wire improves the bond strength between pre-stressed steel wire and concrete. Reduces the frictional losses between pre-stressed wire and concrete and increases the anchorage efficiency. Under the dispensations of the government's Industrial Policy of the post-liberalisation era, four steps changed the direction of the steel industry in India. These were (i) freedom to set up integrated steel plants in the private sector; (ii) placing imports of steel under OGL (open general licence); (iii) reduction of import duties on both steel and scrap; and (iv) decontrol of domestic prices. As a result, India has come to enjoy a cost advantage compared to most countries. The domestic demand is based on the per capita consumption in the urban sector increasing from 77 kg to 165 kg in 2019-20 at an annual growth of 5%. As a whole it is a good project for new entrepreneurs to invest. Few Indian Major Players are as under • Aditya Ispat Ltd. • Bedmutha Industries Ltd. • Bindawala Cables & Conductors Ltd. • Calcast Ferrous Ltd. • D & H India Ltd. • Himachal Tubes & Wires Ltd. • Radiant Wires Ltd. • Rakan Steels Ltd. • S K M Steels Ltd. • Sail Bansal Service Centre Ltd. • Utkarsh Tubes & Pipes Ltd. • VandanaUdyog Ltd.
Plant capacity: 60 MT/dayPlant & machinery: 224 lakhs
Working capital: -T.C.I: Cost of Project : 958 lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Helmet Manufacturing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A helmet is a form of protective gear worn to protect the head from injuries. The primary goal of a motorcycle helmet is motorcycle safety-to protect the rider's head during impact, thus preventing or reducing head injury and saving the rider's life. Some helmets provide additional conveniences, such as ventilation, face shields, ear protection, intercom etc. All helmets attempt to protect the user's head by absorbing mechanical energy and protecting against penetration. Their structure and protective capacity are altered in high-energy impacts. Beside their energy-absorption capability, their volume and weight are also important issues, since higher volume and weight increase the injury risk for the user's head and neck. Anatomical helmets adapted to the inner head structure were invented by neurosurgeons at the end of the 20th century. It is estimated that, worldwide each year, 1.24 million deaths and 20 to 50 million injuries are caused by road traffic crashes. The past two decades have seen a complete transformation of motorcycles industry worldwide with demand often beating the market’s expectation. The estimated demand for helmets is around 90 millions pieces per annum while the total capacity of ISI helmets is not more than 10 million pieces. Premium motorcycles helmet are witnessing strong demand, supported by growing preference for luxury motorcycle brands and rise in the number of fashion conscious riders with high disposal incomes.Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Aerostar Helmets Ltd. • M S A (India) Ltd. • Mallcom (India) Ltd. • Steelbird Hi Tech (I) Ltd. • Titan Company Ltd.
Plant capacity: 500 Nos/dayPlant & machinery: 57 lakhs
Working capital: -T.C.I: Cost of Project: 326 lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Prestressed Concrete Cement Poles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

For many years throughout the world, poles made of wood, steel, and concrete have been used to support power transmission, telephone and telegraph lines, street lighting, overhead power lines for railroads, and antenna masts. Concrete poles were first used over 60 years ago and were then made of normal reinforced concrete. As technology improved, production and use of concrete poles gradually increased. Prestressed concrete poles (PSC Poles) are highly durable and strong. PSC Poles are fabricated from excellent quality concrete material. These poles are used extensively in electrical industry, for establishing electrical connections and fittings. The poles are ecofriendly and require very low maintenance. The PSC poles have consistent material properties throughout their length. PSC poles are not susceptible to rot and decay. The PSC pole has the same strength throughout its service life. PSC poles are not susceptible to insect and animal attack. Furnish and install prestressed concrete poles for services pole applications, luminaire support, and strain poles for span wire support of traffic signals, signs, and other devices. And often support wires and other components for many utilities such as electric power, telecommunications, cable television, and fiber optic. The demand for Prestressed (Pre-cast/Reinforced) concrete-cement (PCC) poles directly depends on the growth of electric power sector. The growth in generation and suppy of electric energy gives rise to demands for PCC poles & other systems by way of OEM & replacement/renovation demands. A large network of electricity distribution for rural electrifications, agricultural & irrigational consumptions can be catered to only by establishing an efficient generation & distribution standards. All these factors are essentially going to raise the demand for not only electrical equipments but also distribution materials including poles.Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian Major Players are as under • Arvind Kumar Nand Kumar Ltd. • Ashoka Pre-Con Pvt. Ltd. • Concrete Udyog Ltd. • Genus Power Infrastructures Ltd. • Sainik Finance &Inds. Ltd. • Shri KrsnaUrja Project Pvt. Ltd.
Plant capacity: 200 Nos/dayPlant & machinery: 303 lakhs
Working capital: -T.C.I: Cost of Project: 1401 lakhs
Return: 26.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

Liquid Floor Cleaners (Lizol & Easy Type)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Floor Cleaners are the aid of housekeeping to keep the house neat and clean. Cleaning agents in general can be defined as that are used to assist the cleaning process. Cleaning is primarily the removal of dirt and dust. It is used to remove stains dirt, litter, grit, sand which scratch and wear down the surface and to remove allergens, in particular dust. Acid cleaners, alkaline cleaners, solvent cleaners and disinfectants are the types of liquid floor cleaner. The average expenditure per family on surface cleansers outside the multipurpose detergents ranges between Rs. 15 and Rs. 25 on an all-India basis and about Rs. 45 in the urban areas. The toiletries and household cleansing market is expected to grow at a CAGR of 16.36% from FY’2014-FY’2019. Floor cleaning market is the second largest product category of the toiletries and household cleansing market of India with revenues. Growing awareness, easier access to range of products through organized retail formats and changing lifestyles have been the key growth drivers for the sector with even rural households starting to display preference for toilet cleaner products instead of phenyl and acids which facilitated the further expansion of the industry in India. With a population of over one billion, India is one of the largest economies in the world in terms of purchasing power and increasing consumer spending, next to China. The Indian FMCG industry, with an estimated market size of ~ `2 trillion, accounts for the fourth largest sector in India. In the last decade, the FMCG sector has grown at an average of 11% a year; in the last five years, annual growth accelerated at compounded rate of ~17.3%. The market is expected to grow in the coming years with increasing number of innovative product launches by the existing players focusing on niche uses and convenience such as multifunctional cleaners. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Dabur India Ltd. • Henkel Spic India Ltd. • Hindustan Unilever Ltd. • Pudumjee Paper Products Ltd. • Reckitt Benckiser (India) Pvt. Ltd.
Plant capacity: Lizol Type Cleaner (1 Ltr. Bottle): 5000 Nos/day Easy Type Cleaner (1 Ltr Bottle): 5000 Nos/dayPlant & machinery: 61 lakhs
Working capital: -T.C.I: Cost of Project: 411 lakhs
Return: 28.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

WINERY - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Wine is an alcoholic beverage made from the fermentation of grape juice. The natural chemical balance of grapes is such that they can ferment without the addition of sugars, acids, enzymes or other nutrients. Although other fruits such as apples and berries can also be fermented, the resultant "wines" are normally named after the fruit from which they are produced (for example, apple wine or elderberry wine) and are generically known as fruit or country wine. Others, such as barley wine and rice wine (e.g. sake), are made from starch-based materials and resemble beer more than wine, while ginger wine is fortified with brandy. In these cases, the use of the term "wine" is a reference to the higher alcohol content, rather than production process. The commercial use of the English word "wine" (and its equivalent in other languages) is protected by law in many jurisdictions. Wine is produced by fermenting crushed grapes using various types of yeast which consume the sugars found in the grapes and convert them into alcohol. Various varieties of grapes and strains of yeasts are used depending on the types of wine produced. Wine is one of the largely suitable alcoholic beverages, which is generally manufactured by fermentation of grape juice. Matured ripe grapes are the basic raw materials. Wine is used as drinking purpose for special type alcoholic beverages in parties or any special social function. It can be used as tonic for the weak health people. There are few well-organized companies engaged in the production of wine. There is also entry of European countries wine in Indian market to compete with the Indian brand. It has good market demands. There is about 20% to 30% demands of wine full filled by importing. Around 200 distilleries are in the production of different types of alcoholic products in the country. Among the various IMFL products whisky occupies the prominent position with a market share of above 50%. There is a good scope for new entrants.
Plant capacity: 9,00,000 Ltrs./ AnnumPlant & machinery: 237 Lakhs
Working capital: -T.C.I: Cost of Project :555 Lakhs
Return: 43.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Bakery Unit - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Bakery is a traditional activity and occupies an important place in food processing industry. A bakery is an establishment that produces and sells flour-based food baked in an oven such as bread, cookies, cakes, pastries, and pies. Baking, particularly the baking of bread is one of the oldest of human activities. Baked goods have been around for thousands of years. The art of baking was developed early during the Roman Empire. Due to the fame and desire that the art of baking received, around 300 BC, baking was introduced as an occupation and respectable profession for Romans. There are many bakery products like bread and its different variants, biscuits, cakes & pastries, cookies, puffs etc. having ready market round the year. Each product enjoys a very wide range in terms of size or weight, flavours, end-use and so on. There is a tremendous scope to introduce new varieties every year. Bread is eaten as a snack, or used as an ingredient in other culinary preparations, such as fried items coated in crumbs to prevent sticking, or the bland main component of a bread pudding, or stuffings designed to fill cavities or retain juices that otherwise might drip away. Cookie is dunked into the tea and eaten quickly due to the biscuit's tendency to disintegrate when wet.Bun is used in making burger, sandwiches. Rusk is dunked into tea and eaten. The bakery manufacturers in India can be differentiated into the three broad segments of bread, biscuits and cake. About 1.3 millionstonnes of the bakery products industry in India is in the organized sector out of 3millions tonnes, while the balance comprises of unorganized, small-scale local manufacturers. The branded packaged segment in this sector had a size of Rs. 17,000 crore in last financial year and is expected to grow at phenomenal rate of 13-15 per cent in the next 3-4 years. Within biscuits, 3-4 large-sized players viz. Britannia, Parle, ITC, Cadburys comprise about 75 per cent of the market. The bakery industry is one of the high growth segments of the country. As a result of changing eating habits in urban India during recent years, due to social considerations and the improved standard of living and also as a result of the influence of globalisation, bakery industry in India is going through impressive growth rates. With the demand for bakery products growing exponentially across the country over the past few years, the bakery industry has been experiencing an upward spiral with changes in product pattern as per emerging trends. The Indian bakery industry is the largest of the food processing industries, estimated to be over Rs 7,000 crore accounting for a compounded annual growth rate (CAGR) of 15%. The industry has traditionally been and largely continues to be in the unorganised sector contributing over 75% of the total production.As a whole it is a good project for entrepreneurs. Few Indian Major Players are as under Anmol Biscuits Ltd. AppuNutritions Pvt. Ltd. Bonn Nutrients Pvt. Ltd. Britannia Industries Ltd. Candico (I) Ltd. Cremica Agro Foods Ltd. Daily Bread Gourmet Foods (India) Pvt. Ltd. Elite Foods Pvt. Ltd. G D Foods Mfg. (India) Pvt. Ltd. H A P G Holdings Ltd. Modern Food Inds. (India) Ltd. Nimbus Foods Inds. Ltd. R C L Retail Ltd. Saj Food Products Pvt. Ltd.
Plant capacity: Bread (400 gmsPkt): 36000 kg/annum Buns (300 gmsPkt): 30000 kg/annum Cookies: 30000 kg/annum Rusk: 18000 kg/annumPlant & machinery: 9 lakhs
Working capital: -T.C.I: Cost of Project : 50 lakhs
Return: 25.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 20 of 248 | Total 2480 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 20 247 248   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top