Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 19 of 202 | Total 2019 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 .... 201 202   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Plastic Optical Lenses - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Optical Lenses are optical components designed to focus or diverge light. Optical Lenses, which may consist of a single or multiple elements, are used in a wide variety of applications from microscopy to laser processing. Many industries utilize Optical Lenses, including life sciences, imaging, industrial, or defense. As light passes through a lens, it is affected by the lens’ profile or substrate. A Plano-Convex (PCX) or Double-Convex (DCX) lens causes light to focus to a point, while a Plano-Concave (PCV) or Double-Concave (DCV) lens causes the light traveling through the lens to diverge. Achromatic Lenses are ideal for applications requiring color correction, while Aspheric Lenses are designed to correct spherical aberration. Germanium (Ge), Silicon (Si), or Zinc Selenide (ZnSe) lenses are ideal for transmitting the Infrared (IR) spectrum, while Fused Silica is well suited for the Ultraviolet (UV). A lens is a transmissive optical device that affects the focus of a light beam through refraction. A simple lens consists of a single piece of material, while a compound lens consists of several simple lenses (elements), usually along a common axis. Lenses are made from transparent materials such as glass, ground and polished to a desired shape. A lens can focus light to form an image, unlike a prism, which refracts light without focusing. Devices that similarly refract radiation other than visible light are also called lenses, such as microwave lenses or acoustic lenses. Most lenses are spherical lenses: their two surfaces are parts of the surfaces of spheres. Each surface can be convex (bulging outwards from the lens), concave (depressed into the lens), or planar (flat). The line joining the centres of the spheres making up the lens surfaces is called the axis of the lens. Typically the lens axis passes through the physical centre of the lens, because of the way they are manufactured. Lenses may be cut or ground after manufacturing to give them a different shape or size. The lens axis may then not pass through the physical centre of the lens. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bausch & Lomb Eyecare (India) Pvt. Ltd. • G K B Ophthalmics Ltd. • G K B Vision Ltd. • Indo-American Optics Ltd. • Prime Ophthalmic Products Pvt. Ltd. • Techtran Ophthalmics Pvt. Ltd. • Techtran Polylenses Ltd.
Plant capacity: 60,000 Pairs/DayPlant & machinery: Rs 1026 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2211 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Toothbrush - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

A toothbrush is a dental instrument used for cleaning teeth, ideally in conjunction with toothpaste or mouthwash. The toothbrush consists of a plastic handle and nylon bristles attached to the head of the brush. Toothbrush occupies a prominent and very important place among the dentifice available today. Toothbrushes are getting more complex and sophisticated every year. New geometries, material combinations and additional functions are the only way to set off from the competition. Today’s consumer expects a dental care system which offers a multitude of preventive dental care measures such as interdental space cleaning, plaque and tartar removal. Due to the increasing awareness and importance of dental hygiene, the use of tooth paste was confined to the upper and upper middle classes of urban society, but with increasing awareness the use of Toothbrush has become well established in even rural house hold. Toothbrush being consumer product and its market being quite competitive and also acceptable. For keeping good health, care of teeth is one of the essential step. The particle of food that sticks to our teeth give birth to fouling smell and many dreadful diseases, which destroy the gums and results in tooth decay. A man, who do not have teeth in his mouth, only know as how important are these. A man having fouling smell coming out from his mouth cannot even get the close company of his companion, and if someone has got a dental diseases, one can blame only one's carelessness in the past. Fortunately people have become conscious of Toothbrushing. Any entrepreneur venture into this field will be successful Few Indian Major Players are as under • Ajay Home Products Ltd. • Anchor Health & Beauty Care Pvt. Ltd. • Andhra Pradesh State Civil Supplies Corpn. Ltd. • Aryan Brush & Estate Developers Ltd. • Camelot Investments Co. Pvt. Ltd. • Colgate-Palmolive (India) Ltd. • Contemporary Targett Ltd. • Dr. Fresh Assets Ltd. (1990) • Gillette India Ltd. • Sinhal Metal Inds. Ltd. • Trim Plastics Ltd. • W H Targett India Ltd. • Warren Pharmaceuticals Ltd.
Plant capacity: 15,000 Nos/DayPlant & machinery: Rs 178 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 316 Lakhs
Return: 26.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Beer Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Beer is the world's oldest beverage, possibly dating back to the 6th millennium BC. It is also the most widely consumed alcoholic beverage and the third most popular drink overall after water and tea. Produced by the brewing and fermentation of starches, mainly derived from cereals — the most common of which being barley. Beer forms part of the culture of many nations, and has acquired various social traditions and associations. Beer is consumed in countries all over the world. Sales of beer are four times that of wine and in most societies, beer is the most popular alcoholic beverage. Today, the brewing industry is a global business, consisting of several dominant multinational companies and many thousands of smaller producers ranging from brewpubs to regional breweries. Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different Countries take beer in varying much like a soft drink in European Countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every Country. Formulations of beer manufacturing are done with the view of availability of the raw materials in that particular part of the World where the brewery is proposed to be established. In most of the parts of the world, barley is a universal source of beer extraction. But, beers are manufactured from Chamomile flowers and powdered gingers etc. as well. Separate formulations have been adopted for every major ingredient used in brewing & distillation of beer. Few Indian Major Players are as under • Appollo Distilleries & Breweries Pvt. Ltd. • Arlem Breweries Ltd. • Arthos Breweries Ltd. • Associated Breweries & Distilleries Ltd. • Aurangabad Breweries Ltd. • Blossom Industries Ltd. • Buckingham Distilleries & Breweries Ltd. • East Coast Breweries & Distilleries Ltd. • Foster'S India Ltd. • Hindustan Breweries & Bottling Ltd. • Kalyani Breweries Ltd. • Kool Breweries Ltd. • Lilasons Breweries Ltd. • Lilasons Industries Ltd. • Malabar Breweries Ltd. • Molson Coors India Pvt. Ltd. • Mysore Breweries Ltd. • Sabmiller India Ltd. • United Breweries Ltd. • Winsome Breweries Ltd.
Plant capacity: Beer (650 ml size Bottle):10,000 Litres/DayPlant & machinery: Rs 306 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 1055 Lakhs
Return: 27.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

SOLAR PANEL- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Solar Panels are in general Silicon made Rectangular Shaped Glass Covered Products which Produce Electricity when exposed to the Sun. These Panels produce Direct Current (DC) Electricity which has to be converted by a Solar Invertr to Alternating Current (AC) Electricity to be used by Consumers. . Solar Panel produced Electricity usually costs between Rs 15-18 /KwH (much higher than the Rs 3-6/unit paid normally) which makes it uneconomical except in special cases like off grid applications. Replacing expensive Diesel powered Telecom Towers with Solar Panels is also an option. Sharply falling Solar Panel costs should make it competitive with your electricity in 2-3 years. In places like Italy, Solar Electricity is already competitive due to high prices of electricity. Conversion of light energy in electrical energy is based on a phenomenon called photovoltaic effect. Silicon is the most widely used semiconductor material for constructing photovoltaic cell. When semiconductor materials are exposed to light, the some of the photons of light ray are absorbed by the semiconductor crystal which causes significant number of free electrons in the crystal. This is the basic reason of producing electricity due to photovoltaic effect. The heart of the solar energy generation system is the Solar cell. It consists of three major elements, namely:- the semiconductor material, junction formed within the semiconductor, the contacts on the front and back of the cell that allow the current to flow to the external circuit. Uses and Application of photovoltaic are in agriculture, industry, telecommunication and public services. Solar power is attractive because it is abundant and offers a solution to fossil fuel emissions and global climate change. Earth receives solar energy at the rate of approximately 1,73,000 TW. In terms of all renewable energy, currently India is ranked fifth in the world with 15,691.4 MW grid-connected and 367.9 MW off-grid renewable energy based power capacity. India is among top 5 destinations worldwide for solar energy development as per Ernst & Young’s renewable energy attractiveness index. As a whole there is a good scope for entrepreneurs for investment.
Plant capacity: Solar PV Module (240 watt) : 350 Nos/day (25 MW)Plant & machinery: Rs 278 Lakhs
Working capital: -T.C.I: Cost of project: Rs 852 Lakhs
Return: 29.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

MEDIUM DENSITY FIBERBOARD - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include particle board, medium-density fiberboard, and hardboard. Fiberboard, particularly medium-density fiberboard (MDF), is heavily used in the furniture industry, auto industry. Medium density fiberboard (MDF) is a generic term for a panel primarily composed of lignocellulosic fibers combined with a synthetic resin or other suitable bonding system and bonded together under heat and pressure. Additives may be introduced during manufacturing to improve certain properties. The entire interfiber bond is formed by a synthetic resin or other suitable organic binder. MDF is generally cheaper than plywood. The surface of MDF is very smooth which makes it great surface for painting. MDF is very consistent throughout, so cut edges appear smooth and won’t have voids or splinters. Indian particle board and plywood industry dates back to the First World War. It has come a long way having grown nearly six-fold since its inception. The large producers account for 15% of the total production, producing some 38 mn sqm of plywood and blockboards.MDF prices have been increase at an estimated average annual rate of 2.6% in 3 years to 2016. The global potential demand for panel board is estimated at 250 million m³ per year and the potential market for MDF alone is 100 million m³. As a whole it is a good project for entrepreneurs.
Plant capacity: Medium Density Fiberboard (MDF) : 50001 CBM/AnnumPlant & machinery: Rs 2034 Lakh
Working capital: -T.C.I: Cost of Project: Rs 3873 Lakh
Return: 28.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

HDPE / PP Woven Fabric From Tape Line using Circular Looms and Sacks Making with Lamination of BOPP/ BOPET/ LDPE and Printing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey

Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. Polypropylene, which is also known as PP for short name, is one kind of thermoplastic resin material that produced by the polymerization of propylene. Because of its non toxic, non-staining 100% reusable and durable it is widely used. The polypropylene woven fabric (PP Woven Fabric) provide strong, dependable and economical packaging option for diverse industries across the globe. These fabrics are light in weight and ideally suited for packaging corrugated or wooden boxes, cloth bales, machinery and many other finished goods for complete protection. They are used in making of bags,sacks ,Packing for Textiles, Upholstery, Carpets ,Making Tarpaulin Covers,Open Air Storage . Flexible Intermediate Bulk Containers (FIBC's): The FIBC is a large bag made of woven polypropylene (PP) fabric that is usually extrusion coated to provide additional barrier and leak-proofness. They are cheaper in cost and offer better packaging properties, high resistance towards moisture and insects. There are a little over 30 Indian manufacturers and the present output of the Indian FIBC industry is estimated to be about 125,000 MT per year valued at some Rs. 1,350 crores. The maximum growth potential is seen in the FIBC, woven sacks exports, leno bags & wrapping fabric. Thus, as an entrepreneur this project offers an exciting opportunity to you.
Plant capacity: HDPE/PP Woven Fabric: 7.2MT/day HDPE/PP Woven Bags for fertilizer: 102857 Nos/dayPlant & machinery: Rs 1507 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 2536 Lakhs
Return: 21.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Vacuum Fried Vegetable Chips (Sweet Potato, Beans and Beetroot)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

India is one of the largest producers of potato. Besides being used as a daily food item in various vegetable preparations, potato today increasingly finds use in the form of chips or wafers as snacks food. The potato chips and wafers are popular processed food items that give considerable value addition to potatoes. Mixed Vegetable Chips (Sweet Potato, Pumpkin, Carrot, Taro and Green Beans),mixed fruit chips and beet root chips are processed by a vacuum frying method, the latest technology using the carefully selected raw materials from the best growing regions. The basic chips are cooked and salted, and additional varieties are manufactured using various flavorings and ingredients including seasoning, herbs, spices, cheeses, and artificial additives. Chips are a predominant part of the snack food market in English speaking countries and numerous other Western and Asian nations. Vegetables chips and fruit chips are 100% natural, Low fat, high nutrient, no preservative. India's potato production has seen a phenomenal increase since the 1950s, mainly due to strong demand from the processing industry and remunerative returns. It is grown all over the country with Uttar Pradesh growing the maximum quantity. The overall size of the snack food market is estimated at Rs. 45 to Rs. 50 bn. The market is reported to be growing at 7 to 8 % annually. In India it is being produced not only on large scale by big firms, but also on cottage/home scale in semi-urban and rural areas. Owing to this, there is a number of companies from both the organized as well as unorganized sector who are already catering to the needs of tea stalls, restaurants, railway stations, tourist places etc. Still there is a huge demand to be met for these products in interior and remote places in different parts of the country. As a whole there is a good scope for new entrepreneur with manufacturing of good quality of product.
Plant capacity: Sweet potato: 120 kg/day Beat root: 80 kg/day Beans chips: 266 kg/dayPlant & machinery: Rs 83 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 209 Lakhs
Return: 26.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Khaini, Zarda & Gutka - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Tobacco is an important commercial crop cultivated in an area of 0.4 million ha producing annually around 700 million kg of cured leaf out of which 260 M kg is Flue-Cured Virginia tobacco (cigarette type). India is the 3rd largest producer of tobacco in the world after China and Brazil. Flue-Cured Virginia (FCV), Bidi, Hookah and Chewing, Cigar filler, Cigar Wrapper, Cheroot, Burley, Oriental, HDBRG, Lanka etc., are the different types of tobacco grown in the country. India ranks 5th largest exporter of tobacco in the world after Brazil, USA, Malawi and Turkey. Gutka is the refined tobacco with catechu, chuna, flavouring agents and perfumery compounds etc. It is now-a-days a very common mouth freshener. Zarda is a mixture of tobacco, lime, spices, and occasionally, silver flakes is also added to pan and chewed. Khaini is not only the cured leaves of tobacco in granular form but it contains toxic, hovouring and soothing antiseptic ingredients which makes the man fresh and free from sullenness laziness. The tobacco industry is one of the most profitable industries in the world. All types of chewing tobacco is used as chewing material by the people which generates some sensation and makes the people fresh and recovering from tiresome. Due to its intoxicant constituent nicotine it serves the purpose of germicide for teeth and so people use it for saving their teeth from various dental diseases. India Tobacco market is expected to reach USD 35 billion by FY’ 2018. Chewing tobacco has been a tradition in India for centuries. Of the total amount of tobacco produced in the country, around 48% is in the form of chewing tobacco, 38% as bidis, and only 14% as cigarettes. Thus, bidis, snuff and chewing tobacco (such as gutka, khaini and zarda) form the bulk (86%) of India’s total tobacco production. In the rest of the world, production of cigarettes is 90% of total production of tobacco related products. The developing countries are expected to further increase their share in world tobacco production, according to the report. Any entrepreneur venture into this field will be successful.
Plant capacity: Khaini: 500 kg/day, Zarda: 500 kg/day, Gutka: 500kg/dayPlant & machinery: Rs 51 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 318 Lakhs
Return: 31.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Autoclaved Aerated Concrete Blocks (AAC Blocks)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Autoclaved Aerated Concrete (AAC) is a non-combustible, lime-based, cementitious building material that is expanding into new worldwide markets. . In our country aerated techniques have been developed for about 40 years, and its technique skills and equipments are becoming mature. The AAC has the features of light bulk density, good thermal insulation properties and sound-absorption, certain strength and process ability, and its raw materials is very rich, especially the reuse of fly ash enables the comprehensive utilization of industrial residue, curbs environmental pollution, no destroy on farmland, create good social and economic benefits. AAC is an ideal alternative of the traditional clay brick wall materials. This is a light- weight building material produced by autoclaving a set mix of fine siliceous materials such as ground sand or fly ash and a binder like Portland cement or lime. AAC products are equally suitable for residential construction, multistory buildings, commercial, and industrial construction. The autoclaved aerated concrete sector of the construction industry is now in the phase of a tremendous growth cycle. AAC Reduces Additional Material Use and Minimizes Waste and Pollution. The main benefits of autoclaved aerated concrete over other cladding materials are its good strength-to-weight ratio, its mobility and, because it is a non-combustible material, its fire performance. There will be phenomenal growth in autoclaved aerated industry in the near future. It is estimated that by 2025 about 66 per cent of the world population will live in urban areas on 7 per cent of the land, which means that urbanization will be on a small portion of land. This will need taller buildings and use of high strength concrete.
Plant capacity: AAC Blocks: 500 Cu.Mtr./dayPlant & machinery: Rs 601 Lakhs
Working capital: -T.C.I: Cost of project: Rs 1415 Lakhs
Return: 25.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Foil - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchen ware to electric conductors and from railway wagon to Appollo spacecraft. Because of its intrinsic and versatile properties of lightness, strength to weight ratio, corrosion resistance, electrical and thermal conductivity, non toxicity etc., a wide range of uses has opened up for this metal. Aluminium as a packaging material is unmatched owing to its light weight, hygienic and non-contamination which eventually results in longer shelf-life of end products. Aluminium foil is a thin sheet of metal. As such it can be an absolute barrier to moisture, gases, odors, bacteria and moulds. The high reflectivity of aluminium ensures good protection against radiant heat, whilst its opacity is important in preventing deterioration of a very large range of foods and drinks which are affected by light. It is used for packaging and non packaging uses. The growth of this industry has been in the recent past, owing to the growing application of foil in a variety of products. India is one of the key producers of aluminium foil in the region. Over 70% of aluminium foil used in India is for packaging applications. Pharmaceuticals followed by beverages, personal care and a wide range of food and non-food products, semi rigid containers and house foil are the principal applications of aluminium foil in India in the packaging sector. Indai is the biggest aluminium foil manufacturer in the country. Other major manufacturers include India Foils, Emco, PG Foils and Flex Art. Holding on to the emerging indicators and the future prospects, Hindalco has plans to increase its aluminum smelting capacity three-fold to 1.8 mn tonne and alumina refining capacity four-fold to 6 mn tonne annually. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: 6 MT/DayPlant & machinery: Rs 58 Lakhs
Working capital: -T.C.I: Cost of project: Rs 312 Lakhs
Return: 28.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 19 of 202 | Total 2019 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 .... 201 202   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top