Google Search

Search

Already a Member ?

Best Business Opportunities in Maharashtra- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Automotive Sector: Project Opportunities in Maharashtra

 

PROFILE:

The automotive industry in India is one of the largest in the world and one of the fastest growing globally. A sound transportation system plays a pivotal role in a country’s rapid economic and industrial development. The well-developed Indian automotive industry ably fulfils this catalytic role by producing a wide variety of vehicles. The automobile industry comprises automobile and auto component sectors. It includes passenger cars; light, medium and heavy commercial vehicles; multi-utility vehicles such as jeeps, scooters, motorcycles, three-wheelers and tractors; and auto components like engine parts, drive and transmission parts, suspension and braking parts, and electrical, body and chassis part. The automotive industry designs, develops, manufactures, markets, and sells motor vehicles, and is one of the world's most important economic sectors by revenue. Indian automotive sector is a key contributor to the economic growth. India is World’s second largest two wheeler market, Asia’s third largest passenger vehicle market and World’s fourth largest commercial vehicle and tractor market. Maharashtra has strongly emerged as the top destination in India for automobile sector with a strong presence across the value chain.

 

RESOURCES:

Maharashtra accounts for approximately 33% of the country’s output of automobiles by value. Major automobile clusters in the state are Pune, Nasik, Aurangabad and Nagpur. Maharashtra is the leading producer of heavy and commercial vehicles in the country. Auto and auto ancillaries contribute to 9% of Maharashtra’s manufacturing strength. Maharashtra has a strong skilled labour base supporting the automotive industry. The state offers a strong educational infrastructure with technical institutions providing automobile engineering courses across the state. India's premier automotive R&D, testing and certification organisation, Automotive Research Association of India (ARAI) is present in Pune. India’s first Auto Cluster Development and Research Institute are in the state.

 

GOVERNMENT POLICIES:

Policy aims to promote integrated, phased, enduring and self-sustained growth of the Indian automotive industry. Special policies for Auto industry make it a lucrative investment sector.

·        Exalt the sector as a lever of industrial growth and employment and to achieve a high degree of value addition in the country; Promote a globally competitive automotive industry and emerge as a global source for auto components

·        Establish an international hub for manufacturing small, affordable passenger cars and a key centre for manufacturing Tractors and Two-wheelers in the world. Ensure a balanced transition to open trade at a minimal risk to the Indian economy and local industry

·        Conduce incessant modernization of the industry and facilitate indigenous design, research and development

·        Assist development of vehicles propelled by alternate energy sources;

·        Automatic approval for foreign equity investment of up to 100 per cent for manufacturing of auto components.

·        Setting up of a technology modernization fund, with special emphasis on SMEs and encouragement to establish development centres for SMEs.

·        Increasing exports and related infrastructure and streamlining training/research institutions around auto hubs.

·        Setting up of automotive training institutes and auto design centres, special auto parks and auto component virtual SEZs

·        To enhance and upgrade the testing and validation infrastructure and establish centres of excellence for automotive R&D.

·        Lowering of excise duty on small cars, increasing budgetary allocation for R&D activities and lowering duty regime in general.

·        Weighted increase in the in-house R&D expenditure from 150% to 200% and from 120% to 175% on outsourced R&D expenditure.

Chemical Sector: Project Opportunities in Maharashtra

 

PROFILE:

Chemical industry is one of the oldest industries in India. It not only plays a crucial role in meeting the daily needs of the common man, but also contributes significantly towards industrial and economic growth of the nation. The industry, including petro-chemicals, and alcohol-based chemicals, has grown at a pace outperforming the overall growth of the industry. India’s chemical industry contributes close to 3% to country’s GDP (2009). India is expected to grow at more than 11% till 2011 at almost double growth rate of the global industry. The chemical industry accounts for about 17.6% of the output of the manufacturing sector and around 11% in total exports of the country. The industry registered a growth of 16% from FY 2005 to 2010 In terms of volume, India is 12th largest in the world and 2nd largest in the developing world after China, Maharashtra has strong presence in chemical, petrochemicals, oil and gas sector. Maharashtra contributes 27.4% of total chemicals, petrochemicals and oil and gas output and around 15% of the total production of basic petrochemical products in India. Mumbai, Nagothane, Rabale & Patalganga are major petrochemical hubs while Thane, Mumbai, Pune and Wardha are chemical hubs.

 

RESOURCES:

Maharashtra has a well developed chemical and petrochemicals sector that has been doing extremely well on the economic front. The chemical industry in Maharashtra is among the main industries which has an important contribution to the economy of the state. There are many categories of the chemical industries in Maharashtra such as agrochemicals, dye & pigments, inorganic chemicals, petrochemicals, polymers, textile chemicals, pharmaceuticals etc. Chemical sector has been traditionally strong in Maharashtra with specific strength in Raw materials, Building Block production and Value Addition & Processing with clusters located in the Mumbai, Thane, Pune belt. Maharashtra has a strong skilled labour base supporting the chemical industry. The state offers a strong educational infrastructure with technical institutions providing Chemical engineering courses across the state. There is a strong resource pool and backward linkages with the well-developed chemicals and petrochemicals sector serves as an added advantage. All major domestic and number of global chemicals & petrochemicals players have a presence in the state. It contributes 27.4 per cent of the country's chemicals, petrochemicals and oil & gas output. The state also accounts for 18.2 per cent of the country's employment in the sector. The chemical sector in the country is expected to grow at 15 per cent per annum till 2010 and thus, presents ample opportunities for the state. Opportunities would primarily exist in the areas of polymers & plastics, fertilisers and synthetic yarns. Some of the names are Hindustan Petroleum, Bharat Petroleum, Reliance Industries, and Indo-Rama Synthetics. Maharashtra has a strong presence in the chemicals, petrochemicals, and oil and gas sector.

 

GOVERNMENT POLICIES:

·        Licensing requirements have been removed, except for hazardous chemicals and a few special drugs.

·        Entrepreneurs are allowed to set up chemicals industries following the Industrial Entrepreneurs Memorandum (IEM) route.

·        Under the automatic route, 100% FDI is allowed for all chemicals except hazardous chemicals.

·        In the Union Budget 2009-10, the Department of Chemicals and Petrochemicals was granted an outlay of USD 5.12 Billion

·        To mitigate the impact of anti dumping, Government has imposed 20% safeguard on soda ash

·        The peak rate of customs duty on most chemicals is 7.5%.

·        Plans are underway to set up port-based chemicals parks in SEZs to encourage clustering, provide infrastructure and enable tax concessions.

·        16% excise duty on almost all chemicals

·        Downstream SEZs have been planned to use the output of chemicals parks

 

 

Food and Agro Sector: Project Opportunities in Maharashtra

 

PROFILE:

India is one of the world’s largest producers as well as consumers of food and food products Maharashtra is a bio-diverse state with 9 agro climatic zones and varying soil types, suitable for agricultural development. The export from Maharashtra for fresh vegetables and fruits accounts for 30% and for processed food products is almost 50%. Mumbai port (MPT) and Jawaharlal Nehru Port (JNPT) are major ports used for exporting processed food products. The state has a strong skill base with a total of 73 institutions with an intake capacity of 5,895 students including 4 Agriculture Universities and 5 national level research organizations. Maharashtra has 8 Agricultural Export Zones (AEZ).

RESOURCES:

Reaching top most position in the country Maharashtra is India’s leading agriculture state.  The state has achieved many innovative agro-industrial ventures, the sugar co-operative and cooperatives for cultivating and marketing, including exports of grapes, mangoes, strawberries etc. Wide availability of varied horticultural produce due to varied range of climate & soil conditions offers tremendous scope to flourish state’s processing industry to increase the processing & value addition from present 1.5% to reach up to 35% of total produce.  Bio-diverse state with 9 agro climatic zones and varying soil types is suitable for agricultural development. Maharashtra is the major horticulture state with more than 22.04 lakh hectares area under horticulture and 4.48 lakh hectare area under vegetables. Alphonso Mangoes accounts for 90% of India’s export in mangoes. It leads sugar industry with 201 sugar factories. The export from Maharashtra for fresh vegetables and fruits accounts for 30% and for processed food products is almost 50%. Maharashtra has the highest gross value addition to food products in the country 16.18%. Maharashtra has eight Agri Export Zones spread across the state for Grapes and Grape Wine, Mangoes, Kesar Mango, Flowers, Onion, Pomegranate, Banana and Oranges. It also has additional five crop cluster for Cashew, Sapota, Sweet Orange, Fig and Custard Apple.

GOVERNMENT POLICIES:

Maharashtra Government initiatives are very unique to make agriculture, horticulture, Agri business, Food Processing industry highly competitive and successful in the country.

·         Reimbursement of 50% of the net VAT paid, instead of 25%;

·         5% interest subsidy on term loans for fixed capital investment for 5 years;

·         In the case of products attracting zero VAT, incentives against the amount of VAT retained and not refunded on input purchases.

·         Eligibility criteria (additional investment of 25% subject to a minimum of INR 1 crore) for providing incentives in the case of expansions under PSI 2007

·         The National Horticulture Mission (NHM) provides 50% of the capital cost with a cap of Rs. 3 lakh per unit for basic infrastructure.

 

 

 

 

 

Textile Sector: Project Opportunities in Maharashtra

 

PROFILE:

The textile industry occupies a leading position in the hierarchy of the Indian manufacturing industry. It has witnessed several new directions in the era of liberalization. While textile exports are increasing and India has become the largest exporter in world trade in cotton yarn and is an important player of readymade garments, country’s international textile trade constitutes a mere 3% of the total world textile trade The textile industry is one of the most important pillars of the Indian economy. It contributes about 4% to the GDP, and 17% to the country’s export earnings. It provides direct employment to over 35 million people. Indian textile industry is estimated to be at USD 51.4 billion. The industry accounts for 4% of the country’s GDP and 14% of its industrial production. Maharashtra contributes to about 10.4% to India’s textiles and apparels output. Maharashtra has the largest area under cultivation for cotton (33.4%). The State has witnessed 122 major textile projects with an investment of USD 224 Million.  There exists largest number of the sectors 100% export oriented units, with a count of 560 are based in Maharashtra.

 

RESOURCES:

Maharashtra contributes to about 10.4% to India’s textiles and apparels output. Cotton is available in bulk in Maharashtra which is one of the key factors that have enabled the state to establish a competitive edge. Vidarbha region has a predominant cotton production, while western region is famous for spinning mills. The major clusters of Maharashtra for the industry are Kolhapur, Mumbai, Nagpur, Nashik, Pune, Sangli, Satara, Sholapur and Thane. The State has witnessed 122 major textile projects with an investment of USD 224 Million.  There are largest numbers of the sectors 100% export oriented units, with a count of 560 are based in Maharashtra. Maharashtra has abundant raw material availability, cost effective labour pool, growing domestic market & presence across value chain.

 

 

 

GOVERNMENT POLICIES:

The Ministry of Textiles in India has formulated numerous policies and schemes for the development of the textile industry in India. The Government of India recently announced the new National Textile Policy (NTP), with the objective of facilitating the industry to attain and sustain a pre-eminent global standing in the manufacture and export of clothing.

·         Suitable incentive either in capital or in the form of Interest subsidy shall be provided to the Textile units including spinning and ginning pressing units to promote employment.

·         Credit based capital subsidy or suitable interest subsidy on capital investment and working capital shall be provided to the upcoming Textile units including spinning and ginning units to make them self reliance.

·         Providing Technological Upgradation support to the Textile sector under Technological upgradation Fund (TUF) scheme.

·         Setting up of Textile Parks preferably in Vidarbha, Marathwada and Khandesh Region.

·         Rationalize debt equity ratio with special consideration in Marathwada, Vidarbha and Khandesh region.

·         Development of Infrastructure facilities with integration from fibre to garment manufacturing.

·         Pilot projects for power looms in Malegaon and Bhiwandi, Nanded and Nagpur.

 

Small-Scale Industries: Project Opportunities in Maharashtra

 

PROFILE:

Small Scale Industries may sound small but actually plays a very important part in the overall growth of an economy. Small Scale Industries can be characterized by the unique feature of labour intensiveness. The small scale industries sector plays a vital role in the growth of the country. It contributes almost 40% of the gross industrial value added in the Indian economy. It has been estimated that a million Rs. of investment in fixed assets in the small scale sector produces 4.62 million worth of goods or services with an approximate value addition of ten percentage points. The small-scale sector has grown rapidly over the years. The growth rates during the various plan periods have been very impressive.

 

 

 

RESOURCES:

The Maharashtra Small Scale Industries Development Corporation Ltd., popularly known as MSSIDC, was established with a view to giving a new orientation and strength to the development of Small Scale Industries in the State of Maharashtra. The main objective of MSSIDC is to aid, counsel, assist, finance, protect and promote the interests of Small Industries. The Corporation renders assistance to approximately 30000 SSI units in the State. MSSIDC plays a vital role in revival, development and growth of traditional handicrafts of Maharashtra by responding to the diversified need s of rural artisans and marketing their products in India as well as abroad. Over the years, MSSIDC has grown to become India's leading Small Scale Industries Development Corporation, continuously responding to the expanding and diversified needs of Small Scale Industries, Village and Cottage Industries, providing support services like Training and Entrepreneurship Development Programme.

GOVERNMENT POLICIES:

The Policy for Small Enterprises aims to create a congenial atmosphere conducive to the healthy growth of the Small Scale Sector in the State. The broad policy objectives are enumerated below:

·         To achieve an annual growth rate of 15%.

·         To assist the small scale industries in the State to become competitive, domestically as well as internationally.

·         To increase employment generation - particularly by promoting the labour intensive segments.

·         To improve the export performance of the SSI sector by providing adequate support services.

·         To create a more congenial and hassle-free environment for the functioning of the SSI sector

·         To help the SSI sector acquire new technologies and skills so as to compete effectively in the market place.

·         To promote appropriate linkages between the large and small scale sectors in the interest of harmonious industrial development.

·         To strive to promote an appropriate institutional mechanism to revive sick industries

·         To encourage SSI units to grow vertically and graduate, in the course of time, from small scale to medium and large scale unit.

 

 

 

Information Technology Industry: Project Opportunities in Maharashtra

PROFILE:

Information Technology (IT) industry in India is one of the fastest growing industries. Indian IT industry has built up valuable brand equity for itself in the global markets. The Information technology industry in India has gained a brand identity as a knowledge economy due to its IT and ITES sector. The IT–ITES industry has two major components: IT Services and business process outsourcing (BPO). The growth in the service sector in India has been led by the IT–ITES sector, contributing substantially to increase in GDP, employment, and exports. The sector has increased its contribution to India's GDP from 6.1% in 2009-10 to 6.4% in 2010-11. India is a preferred destination for companies looking to offshore their IT and back-office functions. It also retains its low-cost advantage and is a financially attractive location when viewed in combination with the business environment it offers and the availability of skilled people.

RESOURCES:

Considering Maharashtra’s strengths in terms of human resources, connectivity and infrastructure, and the special significance of Information Technology (IT) for generating employment, increasing efficiency and improving the quality of life, the State Government announced its first IT Policy in 1998. It was followed by the IT and IT Enabled Services (ITES) Policy in 2003 which provided comprehensive support for the further development of this sector in Maharashtra. Information technology (IT) sector in tier two cities like Nagpur, Aurangabad and Nashik are any indication, Maharashtra is all set to emerge as the next IT hub, after Bangalore and Hyderabad. So far, the growth of IT industry in the state has been concentrated in the Pune-Mumbai stretch. However, with the new focus in place, tier two cities are expected to mushroom as key IT centres.

 

GOVERNMENT POLICIES:

Government of Maharashtra has been supporting development of industry and business through a series of far-reaching policy initiatives. The Information Technology industry has been an important thrust area and has been receiving government support. During the last five years, the Government focussed on HRD, IT related infrastructure, fiscal incentives to IT units, IT in Governance and Institutional Framework for the IT sector.  These initiatives have enabled the IT industry in the State to establish an initial lead and a firm foundation for a quantum leap has been laid. Exports of software and ITES from the State presently account for about 20% share of the country’s exports.  These exports have registered an annual growth of more than 30% during the last four years. The whole State has been connected through an Optical Fibre Cable Network and a state wide network of competent training institutions has been established for building a pool of world-class IT professionals for providing strength and support to the IT industry in the State.

 

Biotechnology industry: Project Opportunities in Maharashtra

 

PROFILE:

Biotechnology deals with living systems, including plants, animals and microbes. Biotechnology derives its strength by harnessing biological processes that sustain life. It incorporates any technique, which uses living organisms, parts of organisms and enzymes, proteins, etc., which are either naturally occurring or are derived from such living systems. Such techniques can be used to make or modify the products, improve plant or animal productivity or develop microorganisms for special use. Emerging Biotechnology uses recombinant DNA, cell fusion, embryo manipulation, etc. Biotechnology has the potential to transform the lives of the people in the State by impacting hugely on agriculture, animal husbandry, health, environmental protection, material transformation, etc. Further, Maharashtra has the potential to become a leader in Biotechnology, not only in the country but also in the entire world.

RESOURCES:

The State has an excellent intellectual infrastructure. Through nearly 1000 institutions, it produces around 163,000 trained technical personnel each year. The State has already set up specialised parks for different sections including IT. The bio-industrial enterprises cannot sustain themselves unless they are backed up by a highly trained and skilled human resource. Some of the best Centres of excellence in India that are present in Maharashtra do precisely that. These include the Bhabha Atomic Research Centre, Indian Institute of Technology, Tata Institute of Fundamental Research, University Department of Chemical Technology, and the Cancer Research Institute, all at Mumbai. The Animal Diseases Investigations Laboratory, Pune involved in diagnosis and research of animal diseases, especially in four States of the Western region of the country, has been recognised as reference laboratory by Government of India. New forward looking initiatives in providing specialized education in Biotechnology have already begun to emerge. A number of defence research establishments in the State have been engaged in conducting cutting edge research in Biomedicals, Bioinformatics and Biotechnology.

GOVERNMENT POLICIES:

Maharashtra government is trying to develop biotech industry in the state in order to help to develop affordable and more cost effective drugs and devices to counter diseases common to India and to tropical and sub-tropical areas to reduce the disease burden. To lead the biotechnology industry in the State to a growth path from where it can become globally competitive, the following steps would be taken:

• Providing the appropriate policy framework which will smoothen its path;

• Providing adequate infrastructure, especially in the form of Biotechnology Parks

• Providing an appropriate package of incentives

• Developing a world-class higher education and research base to serve the needs of a growing Biotechnology industry and for creating high quality employment in the State

• Creating supporting institutions for the Biotechnology industry for  the development of human resource as well as for the applications of Biotechnology

• Simplifying the application of labour and other laws and procedures to accelerate the development and growth of the biotechnology industry

• Facilitating new ventures and innovations

 

Waste management: Project Opportunities in Maharashtra

PROFILE:

Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.

RESOURCES:

There are 250 urban local bodies (ULBs) in Maharashtra which comprises 23 Municipal Corporations, 220 Municipal Councils, 3 Cantonment Boards and 4 Nagar Pachayats. Per capita MSW generation in various towns of the state ranges 100 to 600 gram per day.  For class I cities in Maharashtra, the waste generation rates are in the range of 14 to 63 kg per capita per day, which includes Mumbai having the highest range of 0.63 kg per capita per day (pcpd). The average waste generation rate for the state is estimated as 35 kg pcpd.  As per the projection, the waste quantities are estimated to increase from 6.18 million tons per year in the year 2004 to 8.05 million tons per year in 2011 and 11.77 million tons per year in 2021. In total over 21632.3 tons per day (TPD) of MSW is generated of which around 50% is generated in Mumbai (8500 TPD), Thane (680 TPD), Pune (1740 TPD) and Kalyan (1050 TPD). Compare to other Metropolitan cities in India, MSW generation is highest in Mumbai.  Available data indicates that Waste generated in Maharashtra contains about 55% of Non-biodegradable and 45% biodegradable components. 

GOVERNMENT POLICIES

National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 85 of 304 | Total 3040 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 85 303 304   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

How to Start LPG Cylinder Manufacturing Plant

How to Start LPG Cylinder Manufacturing Plant. Domestic and Commercial LPG Cylinders Production Project LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooling purpose. The body of LPG cylinder is deep drawn in two pieces then these are welded together to make a compact unit without any leak and defect etc. LPG cylinders are in use in 5 Kg., 12 Kg., 14.2 Kg. & 19 Kg. capacities. LPG Cylinder (Liquid Petroleum Gas) is used for domestic cooking purposes in many states as a main fuel source. The 14.2 kg cylinder is used for domestic usage and 19 kg for commercial usage and government has also introduced 5 kg cylinder for domestic and commercial usage. The ultimate use of the LPG cylinder is for the storage and transportation of gas from one place to another. As the gas pipe line can only be managed to the nearby area of the gas producing Centre, and in India gas pipeline is only available in big cities. LPG touches our lives in so many ways. From housing to health, from garments to glass, from livestock to hospitality. Market Outlook Domestic Liquefied Petroleum Gas (LPG) users consume a massive 90% of the total production of LPG in India for cooking purposes. LPG Cylinders plays crucial role in containing and transporting hazardous LPG from LPG filling plant to end consumer. [Approximately 3 million LP Gas Cylinders are delivered to Indian homes every day. It means, approximately 900 million cylinders in a year are delivered to homes for domestic consumption in India. This demand for LPG is increasing every day. ? LPG Demand in India • Fourth largest consumer of LPG in the world after USA, China & Japan. • Third largest consumer in domestic sector in the world after China & USA. • Major marketing of LPG is Domestic Sector. • Home Delivery of 3 Million LP Gas cylinders per day (i.e 900 Million / year) • Steady Growth @ 8% p.a. in LPG Consumption in India. The country’s domestic liquefied petroleum gas (LPG) consumption is expected to grow by nearly 10 per cent in 2017-18, over the last fiscal. Domestic LPG consumption for 2016-17 stood at 21.5 million tonne, up nearly 10 per cent from the previous fiscal’s 19.6 million tonne. Indian LPG imports have been registering some remarkable trends in the last 10 years. The growth trends over the last 10 years, 5 years and 1 year are: 17% CAGR (FY07 to FY17), 14% CAGR (FY12 to FY17) and 23%. At nearly 11 million tonnes in FY17, India surpassed Japan's imports at 10.6 million tonnes. A rapid increase in urban population combined with increasing LPG penetration in rural areas has resulted in a 10% growth in LPG consumption, making India the second largest LPG consumer in the World at 19 million tonne per year. Tags LPG Cylinder Production, Making of LPG Cylinder, LPG Cylinder Manufacturing, Cylinder Manufacturing Process, LPG Cylinder Manufacturing Process, LPG Cylinder Manufacture, LPG Cylinder Production Process, LPG Cylinder Manufacturing Plant, How to Start LPG Cylinder Manufacturing in India?, Manufacturing Process of Gas Cylinders, Manufacturing of LPG Cylinders, Gas Cylinder Manufacture, Manufacturing of LPG Cylinders for Domestic Purpose, LPG Cylinder Production Plant, Commercial LPG Cylinders, Project Profile on LPG Cylinders, Industrial and Commercial (Non-Domestic) LPG Cylinder, Commercial LPG Cylinder Production, LPG Cylinders for Domestic and Commercial, LPG Cylinder Manufacturing Project Report, LPG Cylinder Manufacturing Plant in India, LPG Cylinders Making, Cylinder Manufacturing Company, LPG Gas Cylinder Factory, Operating and Setting Up LPG Cylinder Manufacturing Plant, Commercial LPG Cylinder Manufacturing Plant, Domestic LPG Cylinder Manufacturing Unit, Domestic LPG Cylinder Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Commercial LPG Cylinder Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start LPG Cylinder Manufacturing Industry in India, New project profile on LPG Cylinder Manufacturing industries, Project Report on Commercial LPG Cylinder Manufacturing Industry, Detailed Project Report on Domestic LPG Cylinder Manufacturing, Project Report on Domestic LPG Cylinder Manufacturing, Pre-Investment Feasibility Study on Domestic LPG Cylinder Manufacturing, Techno-Economic feasibility study on LPG Cylinder Manufacturing, Feasibility report on Domestic LPG Cylinder Manufacturing, Free Project Profile on Commercial LPG Cylinder Manufacturing, Project profile on Commercial LPG Cylinder Manufacturing, Top Best Small Business Ideas for Beginners 2017, Small Business But Big Profit in India, Best Low Cost Business Ideas, Small Business Ideas that are Easy to Start, How to Start Business in India, Top Small Business Ideas in India for Starting Your Own Business, Top Easy Small Business Ideas in India, Small Investment Big Returns, Top Best Small Business Ideas in India, Business Ideas With Low Investment, How to Get Rich?, Download free project profile on LPG Cylinder Manufacturing, Industrial Project Report, Project consultant, Project consultancy, Startup Project for Commercial LPG Cylinder Manufacturing, Startup Project, Startup ideas, Project for startups, Startup project plan, Business start-up, Business Plan for a Startup Business, Great Opportunity for Startup, Small Start-up Business Project, Project report for bank loan, Project report for bank finance, Project report format for bank loan in excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Report
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Grease & Lube Oil Blending Plant

Grease & Lube Oil Blending Plant. Lubricants & Greases Manufacturing Business. Lube Oil Blending and Filling Plant. Lubrication is simply the use of a material to improve the smoothness if movement of one surface over another; the material which is used in this way is called a lubricant. Lubricants are usually liquids or semi-liquids, but may be solids or gases or any combination of solids, liquids, and gases. Lubricant is a substance which is used to control (more often to reduce) friction and wear of the surfaces in a contact of the bodies in relative motion. Depending on its nature, lubricants are also used to eliminate heat and wear debris, supply additives into the contact, transmit power, protect, seal. A lubricant can be in liquid (oil, water, etc.), solid (graphite, graphene, and molybdenum disulfide), gaseous (air) or even semisolid (grease) forms. Most of the lubricants contain additives (5-30%) to improve their performance. Lubricating oil creates a separating film between surfaces of adjacent moving parts to minimize direct contact between them, decreasing heat caused by friction and reducing wear. Lubricating oils are specially formulated oils that reduce friction between moving parts and help maintain mechanical parts. Lubricating oil is a thick fatty oil used to make the parts of a machine move smoothly. Lubricating oil, sometimes simply called lubricant/lube, is a class of oils used to reduce the friction, heat, and wear between mechanical components that are in contact with each other. Lubricating oil is used in motorized vehicles, where it is known specifically as motor oil and transmission fluid. Applications of Lubricants: Lubricants are primarily used to reduce friction stress between surfaces. They have the following uses: • As antiwear, antioxidants, and antifoaming agents. • As demulsifying and emulsifying agents. • As rust and corrosion inhibitors. • In machinery as engine oils, compressor oils, gear oils, and piston oils. • As hydraulic, brake, and gear box fluids. • Used in the soap and paint industries. • Some specific uses of certain variants of lubricants are: • Synthetic lubricants are used in turbines, vacuum pumps, and semiconductor devices. • Molybdenum is used as a paint pigment and as a catalyst. • Liquid lubricants are used in medicines. Lubricants are also used as cutting fluids in many industries. Oil, water, and oil emulsion are used as cutting fluids. These liquids are used to cool as well as to lubricate surfaces. Emulsions of oil in water are most widely used as cutting fluids. Lubricants are also used as cutting fluids in cutting, grinding, trading, and drilling of the metals. Cutting fluids are used in machining operations where friction is very high because of close contact between the work piece and the tool. This high friction generates a large amount of local heat and the tool is overheated and may even lose its temper and hardness. As a result, liquids, such as lubricating oils, water, or water emulsions are used on working parts of the machines. The use of lubricating oils in vehicles is vital to their operation. When an engine is properly lubricated, it needs to put less work into moving pistons as the pistons glide easily. In the long run, this means that the car is able to operate while using less fuel and run at a lower temperature. Overall, the proper use of lubricating oil in a car improves efficiency and reduces the amount of wear and tear on moving engine parts. Grease A grease is best thought of as a sponge full of oil, with the sponge being the “base“ or thickener. It holds the oil and additives in place and gives the grease the basic characteristics such as drop point and water resistance. The oil content, typically 80-90% of the grease, provides most of the lubrication performance. To achieve the desired characteristics of a grease, careful selection of base lubricating oil viscosity, base type additives and fillers is essential. When Are Greases Used Greases are generally used in place of oil in the following situations: • The manufacturer specifies a grease and a lubricant is not required for cooling. • Where the grease acts as a seal to prevent entry of contaminants or loss of lubricant. • Soft grease can be used in place of oils in gearboxes with worn or ineffective seal or where oils would be thrown off the bearing surfaces or leak past seals. • Lubrication points can only be reached during maintenance shutdowns. • It is important to maintain lubricant in the bearing area during periods of prolonged shutdowns or frequent stop-start operations (oil drains away when a machine is stopped but a grease does not). • Where noise reduction is important. • To decrease the frequency of lubrication. • In worn bearings previously lubricated by oil to reduce noise and extend useful life. • Resists leakage, dripping or undesirable throw off. • The main advantage of grease over a fluid are its potentially longer life convenience and ease of application. Market Outlook The main role of a lubricant is to reduce friction between metal surfaces, leading to reduction of heat generation and ultimately to the protection of the parts. Lubricants play an important role in a variety of automotive, commercial and industrial applications such as automotive, manufacturing, power generation and marine. Automotive vehicles require engine oils, transmission fluids, brake fluids and greases. The main role of a lubricant is to reduce friction between metal surfaces, leading to reduction of heat generation and ultimately to the protection of the parts. Lubricants play an important role in a variety of automotive, commercial and industrial applications such as automotive, manufacturing, power generation and marine. Automotive vehicles require engine oils, transmission fluids, brake fluids and greases. A total of 64,585 KL of lubricants, worth of LKR 26.11 billion were sold during the year 2016, up 11.4 % compared to the total sales (quantity) of the year 2015. Lubricant consumption in India stood at around 2.9 million MT during 2013-14, registering a healthy growth rate of 7.6% during 2008-13; the market was valued at around INR 260 billion. Automotive lubricants account for around 47% of the lubricant usage in India; industrial lubes and process oils together account for the rest. Currently, USA is the largest consumer of lubricant oil across the world. China and India comes at second and third position respectively. The consumption pattern In Indian lubricant oil industry is similar to world lube industry. Majority of lubricant is being consumed by automobile sector (55%), rest is being used for Industrial purpose and marine industry. Industrial lubricants are majorly used in the core industrial sectors such as spamming cement, coal, steel, engineering, sugar, marine, defense, railways, power, surface transport, fertilizer and others. The business is driven by growth in infrastructure investments, manufacturing, mining sector and increased manufacturing exports. In this segment demand for high performance lubricants are driven by applications such as compressors, textile machinery windmills, captive power plants and others. One of the essentials in lubricant science is world-class technology. Lubricant technology is driven by the changing needs of the customers and stakeholders. As the global lubricants market volume expected to grow from an estimated 38,635.3 KT in 2014 to 42,780.7 KT by 2019, with a CAGR of 2.4 per cent between 2014 and 2019, India is set to put its foots into the path of economic growth as well. Automotive is the largest and fastest-growing end-use industry for grease. The passenger vehicles and commercial vehicles are driving the demand for high performance grease in the automotive industry. In the automotive industry, grease is extensively used in various auto parts such as wheel bearings, universal joints, suspensions, gears, switches, and connectors because of their excellent properties such as mechanical stability, temperature tolerance, water resistance, and anti-oxidants. The need for high performance grease is rising in the increasing manufacturing of machines and equipment for end-use industries. Industrial greases market trails the GDP due to their widespread application in manufacturing of goods and automotive maintenance operations. Due to the surge in manufacturing in Asia Pacific, the industrial greases market in the region is estimated to witness growth, expanding at a CAGR of 6.3% between 2015 and 2021 in terms of revenue. With the anticipated increase in manufacturing in China in the coming years, the demand for industrial greases in the country is expected to rise between 2015 and 2021. With the rising operating time of machines and greater speed of operations, the need for industrial greases is expected to increase by 2021. Besides, with increase in mechanization of manufacturing activities in developed regions such as North America and Europe, demand for industrial greases is anticipated to increase in these markets. Tags Lube Oil Blending Plant, Lubricants Blending Plant (Lubricants/Grease), Grease & Lube Oil Blending Plant, Lubricants Blending Process, Lubricants and Greases Manufacturing Plant, Lubricants and Greases, Blending Plant, Lubricant and Grease Blending Company, Project Report on Grease Manufacturing, Grease Manufacturing Unit, Industrial Oils and Greases? Blending Plant, Lube Oil Blending Plant and Filling Line, Lubricating Oil Blending Plant and Production Line, Lube Oil Filling Plant, Oil Blending Plant, How Lubricating Oil is Made, Lube Oil Blending, Lubricants & Greases Manufacturing Plant, Lube Blending Plant, Pre-Feasibility Report on Small Scale Lube Oil Blending Plant, Lubricant Blending Process, Process for Making Blended Lubricant, How are Lubricants Produced, Lubricant Blending, Manufacturing of Lubricant Oil, Lubricating Oils and Greases, Lube & Grease Oil Blending Plant and Filling Plant, Manufacture of Oils and Greases, Grease Blending Plant, How to Start Grease Blending Company, Grease Plant, Grease Manufacturing Plant, Blending Plant in India, Grease Manufacturing Plant, Lubricating Oil and Grease Manufacturing, Grease Manufacturing Project Report, Lubricant Blending project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Lube Oil Blending Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Lubricating Oil Blending Plant Industry in India, Lubricating Oil Blending Projects, New project profile on Lubricant and Grease Blending industries, Project Report on Lube Oil Blending Industry, Detailed Project Report on Lube Oil Blending, Project Report on Lubricant and Grease Blending Plant, Pre-Investment Feasibility Study on Lubricating Oil Blending Plant, Techno-Economic feasibility study on Lubricating Oil Blending Plant, Feasibility report on Lubricant and Grease Blending Plant, Free Project Profile on Lube Oil Blending, Project profile on Lube Oil Blending, Download free project profile on Lube Oil Blending, Industrial Project Startup Project for Lubricant Blending Process
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Grease & Lube Oil Blending Plant

Grease & Lube Oil Blending Plant. Lubricants & Greases Manufacturing Business. Lube Oil Blending and Filling Plant. Lubrication is simply the use of a material to improve the smoothness if movement of one surface over another; the material which is used in this way is called a lubricant. Lubricants are usually liquids or semi-liquids, but may be solids or gases or any combination of solids, liquids, and gases. Lubricant is a substance which is used to control (more often to reduce) friction and wear of the surfaces in a contact of the bodies in relative motion. Depending on its nature, lubricants are also used to eliminate heat and wear debris, supply additives into the contact, transmit power, protect, seal. A lubricant can be in liquid (oil, water, etc.), solid (graphite, graphene, and molybdenum disulfide), gaseous (air) or even semisolid (grease) forms. Most of the lubricants contain additives (5-30%) to improve their performance. Lubricating oil creates a separating film between surfaces of adjacent moving parts to minimize direct contact between them, decreasing heat caused by friction and reducing wear. Lubricating oils are specially formulated oils that reduce friction between moving parts and help maintain mechanical parts. Lubricating oil is a thick fatty oil used to make the parts of a machine move smoothly. Lubricating oil, sometimes simply called lubricant/lube, is a class of oils used to reduce the friction, heat, and wear between mechanical components that are in contact with each other. Lubricating oil is used in motorized vehicles, where it is known specifically as motor oil and transmission fluid. Applications of Lubricants: Lubricants are primarily used to reduce friction stress between surfaces. They have the following uses: • As antiwear, antioxidants, and antifoaming agents. • As demulsifying and emulsifying agents. • As rust and corrosion inhibitors. • In machinery as engine oils, compressor oils, gear oils, and piston oils. • As hydraulic, brake, and gear box fluids. • Used in the soap and paint industries. • Some specific uses of certain variants of lubricants are: • Synthetic lubricants are used in turbines, vacuum pumps, and semiconductor devices. • Molybdenum is used as a paint pigment and as a catalyst. • Liquid lubricants are used in medicines. Lubricants are also used as cutting fluids in many industries. Oil, water, and oil emulsion are used as cutting fluids. These liquids are used to cool as well as to lubricate surfaces. Emulsions of oil in water are most widely used as cutting fluids. Lubricants are also used as cutting fluids in cutting, grinding, trading, and drilling of the metals. Cutting fluids are used in machining operations where friction is very high because of close contact between the work piece and the tool. This high friction generates a large amount of local heat and the tool is overheated and may even lose its temper and hardness. As a result, liquids, such as lubricating oils, water, or water emulsions are used on working parts of the machines. The use of lubricating oils in vehicles is vital to their operation. When an engine is properly lubricated, it needs to put less work into moving pistons as the pistons glide easily. In the long run, this means that the car is able to operate while using less fuel and run at a lower temperature. Overall, the proper use of lubricating oil in a car improves efficiency and reduces the amount of wear and tear on moving engine parts. Grease A grease is best thought of as a sponge full of oil, with the sponge being the “base“ or thickener. It holds the oil and additives in place and gives the grease the basic characteristics such as drop point and water resistance. The oil content, typically 80-90% of the grease, provides most of the lubrication performance. To achieve the desired characteristics of a grease, careful selection of base lubricating oil viscosity, base type additives and fillers is essential. When Are Greases Used Greases are generally used in place of oil in the following situations: • The manufacturer specifies a grease and a lubricant is not required for cooling. • Where the grease acts as a seal to prevent entry of contaminants or loss of lubricant. • Soft grease can be used in place of oils in gearboxes with worn or ineffective seal or where oils would be thrown off the bearing surfaces or leak past seals. • Lubrication points can only be reached during maintenance shutdowns. • It is important to maintain lubricant in the bearing area during periods of prolonged shutdowns or frequent stop-start operations (oil drains away when a machine is stopped but a grease does not). • Where noise reduction is important. • To decrease the frequency of lubrication. • In worn bearings previously lubricated by oil to reduce noise and extend useful life. • Resists leakage, dripping or undesirable throw off. • The main advantage of grease over a fluid are its potentially longer life convenience and ease of application. Market Outlook The main role of a lubricant is to reduce friction between metal surfaces, leading to reduction of heat generation and ultimately to the protection of the parts. Lubricants play an important role in a variety of automotive, commercial and industrial applications such as automotive, manufacturing, power generation and marine. Automotive vehicles require engine oils, transmission fluids, brake fluids and greases. The main role of a lubricant is to reduce friction between metal surfaces, leading to reduction of heat generation and ultimately to the protection of the parts. Lubricants play an important role in a variety of automotive, commercial and industrial applications such as automotive, manufacturing, power generation and marine. Automotive vehicles require engine oils, transmission fluids, brake fluids and greases. A total of 64,585 KL of lubricants, worth of LKR 26.11 billion were sold during the year 2016, up 11.4 % compared to the total sales (quantity) of the year 2015. Lubricant consumption in India stood at around 2.9 million MT during 2013-14, registering a healthy growth rate of 7.6% during 2008-13; the market was valued at around INR 260 billion. Automotive lubricants account for around 47% of the lubricant usage in India; industrial lubes and process oils together account for the rest. Currently, USA is the largest consumer of lubricant oil across the world. China and India comes at second and third position respectively. The consumption pattern In Indian lubricant oil industry is similar to world lube industry. Majority of lubricant is being consumed by automobile sector (55%), rest is being used for Industrial purpose and marine industry. Industrial lubricants are majorly used in the core industrial sectors such as spamming cement, coal, steel, engineering, sugar, marine, defense, railways, power, surface transport, fertilizer and others. The business is driven by growth in infrastructure investments, manufacturing, mining sector and increased manufacturing exports. In this segment demand for high performance lubricants are driven by applications such as compressors, textile machinery windmills, captive power plants and others. One of the essentials in lubricant science is world-class technology. Lubricant technology is driven by the changing needs of the customers and stakeholders. As the global lubricants market volume expected to grow from an estimated 38,635.3 KT in 2014 to 42,780.7 KT by 2019, with a CAGR of 2.4 per cent between 2014 and 2019, India is set to put its foots into the path of economic growth as well. Automotive is the largest and fastest-growing end-use industry for grease. The passenger vehicles and commercial vehicles are driving the demand for high performance grease in the automotive industry. In the automotive industry, grease is extensively used in various auto parts such as wheel bearings, universal joints, suspensions, gears, switches, and connectors because of their excellent properties such as mechanical stability, temperature tolerance, water resistance, and anti-oxidants. The need for high performance grease is rising in the increasing manufacturing of machines and equipment for end-use industries. Industrial greases market trails the GDP due to their widespread application in manufacturing of goods and automotive maintenance operations. Due to the surge in manufacturing in Asia Pacific, the industrial greases market in the region is estimated to witness growth, expanding at a CAGR of 6.3% between 2015 and 2021 in terms of revenue. With the anticipated increase in manufacturing in China in the coming years, the demand for industrial greases in the country is expected to rise between 2015 and 2021. With the rising operating time of machines and greater speed of operations, the need for industrial greases is expected to increase by 2021. Besides, with increase in mechanization of manufacturing activities in developed regions such as North America and Europe, demand for industrial greases is anticipated to increase in these markets. Tags Lube Oil Blending Plant, Lubricants Blending Plant (Lubricants/Grease), Grease & Lube Oil Blending Plant, Lubricants Blending Process, Lubricants and Greases Manufacturing Plant, Lubricants and Greases, Blending Plant, Lubricant and Grease Blending Company, Project Report on Grease Manufacturing, Grease Manufacturing Unit, Industrial Oils and Greases? Blending Plant, Lube Oil Blending Plant and Filling Line, Lubricating Oil Blending Plant and Production Line, Lube Oil Filling Plant, Oil Blending Plant, How Lubricating Oil is Made, Lube Oil Blending, Lubricants & Greases Manufacturing Plant, Lube Blending Plant, Pre-Feasibility Report on Small Scale Lube Oil Blending Plant, Lubricant Blending Process, Process for Making Blended Lubricant, How are Lubricants Produced, Lubricant Blending, Manufacturing of Lubricant Oil, Lubricating Oils and Greases, Lube & Grease Oil Blending Plant and Filling Plant, Manufacture of Oils and Greases, Grease Blending Plant, How to Start Grease Blending Company, Grease Plant, Grease Manufacturing Plant, Blending Plant in India, Grease Manufacturing Plant, Lubricating Oil and Grease Manufacturing, Grease Manufacturing Project Report, Lubricant Blending project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Lube Oil Blending Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Lubricating Oil Blending Plant Industry in India, Lubricating Oil Blending Projects, New project profile on Lubricant and Grease Blending industries, Project Report on Lube Oil Blending Industry, Detailed Project Report on Lube Oil Blending, Project Report on Lubricant and Grease Blending Plant, Pre-Investment Feasibility Study on Lubricating Oil Blending Plant, Techno-Economic feasibility study on Lubricating Oil Blending Plant, Feasibility report on Lubricant and Grease Blending Plant, Free Project Profile on Lube Oil Blending, Project profile on Lube Oil Blending, Download free project profile on Lube Oil Blending, Industrial Project Startup Project for Lubricant Blending Process
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Profitable Business Ideas in India for Starting Macaroni, Vermicelli, Noodles and Instant Noodles with Tastemaker Business

Vermicelli Vermicelli is a traditional type of pasta round in section similar to spaghetti. In Italy vermicelli is slightly thicker than spaghetti, but in the United States it is instead slightly thinner. Vermicelli is very fine, long strands of pasta – like a skinny spaghetti – often used in soups. The name means ‘little worms’ in Italian (though in America, it is described more ethereally 'angel hair' pasta). It is available fresh or dried. Fideo is a type of short vermicelli pasta, originally produced in Europe, particularly Spain that spread to Mexican and Latin American cuisine. It is commonly used in chicken soup and in sopa seca, a type of side-dish. Vermicelli is a popular instant food product. It falls under the category of extruded product and is made from wheat flour. At times tapioca or soybean or groundnut flour is also added. Thus, it is rich in proteins and liked by people from all walks of life, irrespective of age. It is basically a snack food item and at times it is also used as a table enricher. With changing lifestyles, greater awareness about health and preference for instant food items have made vermicelli very popular and an item of mass consumption. Noodles Noodles are one of the staple foods consumed in many Asian countries. Instant noodles have become internationally recognized food, and worldwide consumption is on the rise. The properties of instant noodles like taste, nutrition, convenience, safety, longer shelf-life, and reasonable price have made them popular. Quality factors important for instant noodles are color, flavor, and texture, cooking quality, rehydration rates during final preparation, and the presence or absence of rancid taste after extended storage. The origin of noodles has been disputed. Claims have been made that the noodle was of Chinese, Arabian and European origin. A Nature article claimed the oldest evidence of noodle consumption was from 4,000 years ago in China. While long, thin strips may be the most common, many varieties of noodles are cut into waves, helices, tubes, strings, or shells, or folded over, or cut into other shapes. Noodles are usually cooked in boiling water, sometimes with cooking oil or salt added. They are often pan-fried or deep-fried. Noodles are often served with an accompanying sauce or in a soup. Noodles can be refrigerated for short-term storage, or dried and stored for future use. Instant Noodles Instant noodles are sold in a precooked and dried noodle block, with flavoring powder and/or seasoning oil. The flavoring is usually in a separate packet, although in the case of cup noodles the flavoring is often loose in the cup. Some instant noodle products are seal packed; these can be reheated or eaten straight from the packet/container. Dried noodle blocks are cooked or soaked in boiling water before eating. The main ingredients used in dried noodles are usually wheat flour, palm oil, and salt. Common ingredients in the flavoring powder are salt, monosodium glutamate, seasoning, and sugar. The dried noodle block was originally created by flash frying cooked noodles, and this is still the main method used in Asian countries, but air-dried noodle blocks are favored in Western countries. Instant noodles are made from wheat flour, starch, water, salt or kan sui (an alkaline salt mixture of sodium carbonate, potassium carbonate, and sodium phosphate), and other ingredients that improve the texture and flavor of noodles. Other flours may be mixed with wheat flour to make specific types of instant noodles; for example, buckwheat flour is added at 10-40% of wheat flour in the production of buckwheat noodles or soba. The popular noodles include instant Chinese noodles, instant Japanese noodles, and instant European style noodles, which vary in the basic ingredients used to make the noodles. Instant Chinese noodles use kan sui, whereas instant Japanese noodles do not, and the European style noodles often are made with semolina (a coarse ground product of durum wheat). Market Survey The global demand for instant noodles is expected to reach 145.8 billion packs by 2020, driven by the rising trend of convenience food in emerging markets. India takes a major share of this demand, ranking fifth in terms of the global demand for instant noodles after China, Indonesia, Japan and Vietnam. India is the world’s second largest producer of food next to China but accounts for less than 1.5% of International food trade. The Indian food sector is poised for a rapid growth and has potential to become reliable outsourcing partner in the food industry given its strength in primary food sector. India is the most attractive Instant Noodles market in the world. Instant Noodles market matured in India over the years but still it is limited to few players. Vermicelli is a very common food item and is manufactured mostly in unorganized sector. Majority of its products lie on cottage scale and they feed the local and adjoining market. Hence, it is always advisable to set up this industry near the big cities. Tags Making of Spaghetti and Macaroni, Macaroni Manufacturing, How to Make Pasta, Macaroni Making, Pasta Making, Macaroni Making Process, Manufacturing of Vermicelli and Macaroni, Pasta Production Process, Making of Pasta, Macaroni Pasta Production, Pasta Manufacturing, Production of Pasta, Dry Pasta Manufacturing, Preparation of Vermicelli and Noodles, Short Pasta Macaroni Making, Macaroni Production Process, How is Pasta Made, Pasta Manufacturing Process, Pasta Production, Macaroni Pasta Manufacturing Process, Vermicelli Production Process, Vermicelli Production, Making of Vermicelli, Vermicelli Production, Vermicelli Making, Noodles Making , Vermicelli Processing, Vermicelli ,Macaroni, Pasta Making, Noodles Processing, Instant Noodle Production, Noodles Manufacturing, Noodle Production, How to Make Noodles, Process Making Cup Noodles, Noodle Making Process, Fresh Noodle Production, Instant Noodles Manufacturing, How to Prepare Noodles, Instant Noodle Manufacture, Process of Full Instant Noodle, Instant Noodles Processing, Instant Noodle Maker, Instant Noodle Processing, Dried Noodles Production, Pasta/Macaroni making, Fresh Noodle Making, Fresh Noodle Processing, Process of Noodles, Semi-Dried Fresh Noodle Making, Dry Noodles Production, How to make Fresh Pasta, How are Noodles Produced, Instant Noodle Making, Instant Noodles Making, Noodles Manufacturing Business, How to Manufacture Instant Noodles, Making Money from Instant Noodles, Instant Noodles Production, Instant Noodle Business, Noodles Manufacturing Process, Noodles Manufacturing Business Plan, Macaroni, Vermicelli & Noodles Manufacturing, Small Scale Business in Manufacturing Noodles, How to Manufacture Instant Noodles, Pasta Manufacturing Business, Pasta Manufacturing Business, Process of Instant Noodles, How are Noodles Made, Processing of Vermicelli, Production of Vermicelli, Production and Processing of Vermicelli, How to Become a Fresh Pasta Manufacturer, Start Fresh Pasta Business, A Vermicelli Making Business, Profitable Small Business Manufacturing Ideas for Noodle Making, Business Manufacturing Ideas for Instant Noodles, Opening a Noodles Business, Manufacturing Business Plan For Noodles, Opening Business Plans For Instant Noodles, Processing of Vermicelli, Vermicelli Making Process, Process of Manufacturing Vermicelli
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Sugar Manufacturing Industry

Sugar Manufacturing Industry. Mini Sugar Plant. Sugarcane Mill. How Cane Sugar is processed? Manufacturing Project of Sugar Mill. Sugar can be produced from sugarcane, sugar-beet or any other crop having sugar content. But in India, sugarcane is the main source of sugar. At present, this is the second largest agro-based industry of India after cotton textile industry. This industry involves a total capital investment of Rs. 1,250 crore and provides employment to 2.86 lakh workers. In addition, 2.50 crore sugarcane growers also get benefit from this industry. India has a long tradition of manufacturing sugar. Sugar industry is an important agro-based industry that impacts rural livelihood of about 50 million sugarcane farmers and around 5 lakh workers directly employed in sugar mills. India is the second largest producer of sugar in the world after Brazil and is also the largest consumer. Indian sugar industry is a critical industry, as on one hand it services the domestic market, the largest in the world and on the other hand, it supports 50 million farmers and their families. It is the second largest agro based industry in India. Sugar industry in India occupies a distinctive position in the economic and social fabric of the economy. It is playing a pivotal role especially in the upliftment of the rural economy. Future Growth of India sugar market is expected to be led by increasing sugarcane yield, rising demand of sugar by the consumers and increasing sugar recovery rate. The sugar industry in India has witnessed a growth in recent years on account of rising number of sugar factories in the country as well as the increasing sugarcane yield in the country. The surge in growth of the industry is majorly originated from the rising sugar demand by the consumers as well as the institutional sector and also forms the increasing expenditure on food and beverages. The sugar market in terms of revenues has grown at a CAGR of 5% from FY’2010-FY’2015. The sugar industry is expected to grow at a rate of ~%, doubling its worth to INR ~ lakh Crore by 2018. The sugar market in India will grow at a respectable rate due to the increasing sugarcane yield and dropping sugar prices. The Indian sugar industry that has already started talking of a record sugar production of almost 29-30 million tonnes in the 2018-19 crop marketing year that will start from October next year. Today Indian sugar industry’s annual output is worth approximately Rs.80, 000 crores. There are 732 installed sugar factories in the country as on 31.07.2017, with sufficient crushing capacity to produce around 339 lakh MT of sugar. The capacity is roughly distributed equally between private sector units and cooperative sector units. Top 10 Sugarcane Producing States in India: 2014-2015 1 Uttar Pradesh 2 Maharashtra 3 Karnataka 4 Tamil Nadu 5 Bihar 6 Gujarat 7 Andhra Pradesh+ Telangana 8 Haryana 9 Punjab 10 Uttarakhand Sugar (Centrifugal) Producers 1. Brazil: 37,800 2. India; 26,605 3. European Union: 16,010 4. China: 14,263 5. Thailand: 11,333 6. United States: 7,672 7. Mexico: 6,383 8. Pakistan: 5,215 9. Australia: 4,400 10. Russia: 4,400 Tags Sugar Manufacturing Industry in India, Sugar Manufacturing Plant, Manufacturing of Sugar in Industry, Sugar Making Business, Sugar Production from Cane Sugar, How is Sugar Made from Sugarcane, Sugar Production Process, Sugar Manufacturing Process, Sugar Production Plant, Sugar Manufacturing Process, Manufacture of Sugar from Sugarcane, Sugar Production, Sugar Industry in India, Sugar Manufacturing Business, Process of Sugar Manufacturing Business, How Sugar is Processed, Sugar Industry Business Plan, Sugar Mill Business Plan, Start Sugar Manufacturing Business, How to Open Sugar Mill, What is the Minimum Capital Required to Start Sugar Mill, Mini Sugar Plant, Sugar Production Business Plan, Indian Sugar Industry, Sugar Manufacturing Company, Sugar Plant in India, How to Start Sugar Factory, Sugar Manufacturing Factory, Sugar Production Unit, Setting Up Sugar Factory, How do I Start Sugar Factory? How Sugar is made? Sugar Manufacturing project ideas, Sugar Production from Sugarcane, Projects on Small Scale Industries, Small scale industries projects ideas, Sugar Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Sugar Manufacturing Industry in India, Sugar Manufacturing Projects, New project profile on Sugar Manufacturing industries, Project Report on Sugar Manufacturing Industry, Detailed Project Report on Sugar Production, Project Report on Sugar Production from Sugarcane, Pre-Investment Feasibility Study on Sugar Manufacturing, Techno-Economic feasibility study on Sugar Production, Feasibility report on Sugar Production from Sugarcane, Free Project Profile on Sugar Production from Sugarcane, Project profile on Sugar Production, Download free project profile on Sugar Production from Sugarcane, Startup Project for Sugar Production
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of Mosquito Repellent Coil

Production of Mosquito Repellent Coil. Mosquito Repelling Incense Coils Manufacturing Project. Mosquito Coil Composition. Mosquito Repellent Industry A mosquito coil essentially is an incense like the ones that are used in aromatherapy as well as in different religious rituals only this one is used for repelling mosquitoes. Mosquito coils are burned indoors and outdoors in regions like Asia, Africa, and South America. Mosquito coils consist of an insecticide/repellant, organic fillers capable of burning with smoldering, binder, and additives such as synergists, dyes, and fungicide. Mosquitoes need to be exterminated using with right tools and little bit of effort. Mosquito coil is mosquito-repelling incense, usually shaped into a spiral, and typically made from a dried paste of pyrethrum powder. The coil is usually held at the center of the spiral, suspending it in the air, or wedged by two pieces of fireproof nettings to allow continuous smoldering. Burning usually begins at the outer end of the spiral and progresses slowly toward the centre of the spiral, producing a mosquito-repellent smoke. Insecticides are used either for killing or controlling of harmful insects. The insecticides which are applied for repelling insects are termed as “Repellent”. Mosquito is one of the most harmful insects for mankind. To destroy them many preparations are available in the market in various recipies like pest killer spray, soap, oil, powder, repellent etc. Out of these, mosquito repellent is the most popular as it has germicidal and disinfectant properties and is able to repel mosquitoes and is convenient to use. Mosquito coil is used for repelling and killing of household insects like mosquitoes, flies and garden insects. Because of the pyrethrin contained in it, the mosquitoes usually die in its vicinity. Now-a-days repellents are applied by heating impregnated mat over an electrical device, under low temperature which is known as mosquito repellent mats. Simple type of repellent mats is prepared by soaking mats of paper pulp in repellent chemical compound and proper drying. The automatic mosquito coil-manufacturing machine has materialized mass production by getting rid of various restrictions in manufacture. Synthesized pyrethrin, on the other hand, has enabled production of the material of the coils freely while pyrethrum had a limitation in its harvest. These may well be called the technical innovations of the mosquito coil manufacturing industry. Methods of Mosquito Control Mosquito-borne diseases affect millions of people worldwide each year. The bite of a mosquito can result in anything from a skin irritation to contracting malaria. Clearly, mosquitoes are not just a nuisance, but also potentially harmful therefore special products like mosquito repellent used to combat mosquitoes are required. Each of the products used for mosquito control have varying degrees of effectiveness, and it is important to know which may be better than other. Market Outlook The mosquito repellent market is one of the rapidly growing vibrant markets in FMCG sector India. Due to increase awareness regarding vector borne disease, the demand for mosquito repellent products like coils, strips, liquid vaporizers, etc are rising than before, thereby providing high momentum to the Indian Mosquito repellent market. India mosquito repellent market is projected to reach $ 800 million by 2021. The market is expected to witness growth on account of rising disposable incomes coupled with growing awareness among consumers and easy availability of mosquito repellents on the back of robust distribution network. Moreover, rise in literacy rates is also expected to drive the demand for mosquito repellents over the next five years. Mosquito repellent market can be broadly categorized into Coils, Vaporizers, Mats, Sprays, Creams and Other mosquito repellents. Western region dominated the market with a share of 30%, in value terms, in 2015 and is anticipated to remain dominant through 2022. The region is expected to retain its market share due to high levels of literacy and awareness among consumers, coupled with presence of a robust and synchronized retail network that ensures easy availability of a wide variety of mosquito repellents. “Increasing consumer awareness, growing number of government initiatives, rise in consumer spending on health expenditure coupled with increase in rising demand for consumer friendly, non-toxic products like mosquito repelling clothes and perfumes are expected to continue boosting demand for mosquito repellents in India over the next five years. The world mosquito repellent market is expected to register notable growth in the near future attributed to rise in incidence of mosquito-borne diseases and global warming, which facilitates breeding of mosquitoes. Other factors that drive the market are rising health awareness, government initiatives for mosquito control, and affordable cost of repellents. The world mosquito repellent market has been segmented on the basis of product type, distribution channel, and geography. On the basis of product type, the market is categorized into spray, coil, cream & oil, mat, vaporizer and other products. The coil segment dominates the global market in terms of revenue owing to their extensive use by the middle and lower income groups across various developing and rural regions of the world. Cream & oil is emerging as the largest segment due to their increasing availability with herbal ingredients. Tags Production of Mosquitoes Repellants Coils, Mosquito Coil and Process for Producing, How Mosquito Repellent is Made, Process for Manufacture of Mosquito Coil, How to Make Mosquito Coil, Mosquito Coil Making Formula, Mosquito Coil Composition and Process, Mosquito Coil Making Process, Mosquito Coil Making Raw Material, Mosquito Coil Ingredients, Production of Mosquito Coil, Mosquito Coil Making Machine, Production of Mosquito Repellent, Mosquito Coil Making Plant, Mosquito Coil Making Unit, Mosquito Coil Production, Mosquito Coils Manufacture, Production of Mosquito Repellants Insecticides (Mosquito Coil), How to Make Mosquito Repelling Incense, Mosquito Coil Making Factory, Mosquito Repellent Formulations, Mosquito Coils Factory, Mosquito Coil Making Business in India, Mosquito Coils Manufacture, Mosquito Coil Manufacturing Unit, Mosquito Coil Production Plant, Mosquito Coil Making Business, Mosquito Coil Manufacturing company, Project Report on Mosquito Repellent Coils, Mosquito Coil Making project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Mosquito Coil Composition Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Mosquito Repelling Incense Coils Manufacturing Industry in India, Mosquito Coil Composition Projects, New project profile on Mosquito Coil Making industries, Project Report on Mosquito Repelling Incense Coils Manufacturing Industry, Detailed Project Report on Mosquito Repelling Incense Coils Manufacturing, Project Report on Mosquito Repelling Incense Coils Manufacturing, Pre-Investment Feasibility Study on Mosquito Coil Composition, Techno-Economic feasibility study on Mosquito Repelling Incense Coils Manufacturing, Feasibility report on Mosquito Coil Composition, Free Project Profile on Mosquito Repelling Incense Coils Manufacturing, Project profile on Mosquito Repelling Incense Coils Manufacturing, Download free project profile on Mosquito Repelling Incense Coils Manufacturing, Industrial Project Report, Project consultant, Project consultancy, Startup Project for Mosquito Repelling Incense Coils Manufacturing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Aluminium Foil Rolling Mill with PP Caps

Aluminium foil is aluminium prepared in thin metal leaves, with a thickness less than 0.2 millimetres (8 mils), thinner gauges down to 6 µm (0.2 mils) are also commonly used. Standard household foil is typically 0.016 millimetres (0.6 mils) thick and heavy duty household foil is typically 0.024 millimetres (0.9 mils). The foil is pliable, and can be readily bent or wrapped around objects. Pilfer proof caps (P.P. Caps) are popular all over the world which provide not only the above mentioned qualities to the bottle contents, but also a perfect seal which guarantees non-contamination from external environments. This ensures the contents to remain unaffected from atmospheric moisture, gases, dusts and other impurities. Alcoholic liquors, soft drinks, juice, syrups, various hair oils and shampoos etc. There are around 10 Major Aluminium Foil manufacturers in India with rolling capacity of around 10000 tons per month to cater the total demand of around 12000 tons per month in different field of pharmaceuticals and flexible packaging industries. Global demand for aluminium foil is forecast to expand 8.7% p.a. between 2014 and 2018. Which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • India Foils Ltd. • J P Foil Ltd. • J S K Inds. Pvt. Ltd. • Jayakrishna Aluminium Ltd. • Jindal Aluminium Ltd. • Kunj Alloys Pvt. Ltd.
Plant capacity: Aluminium Foil: 1,200 MT per Annum Aluminium PP Caps: 2,400 MT per Annum Aluminium Scraps: 90 MT per AnnumPlant & machinery: 669 Lakhs
Working capital: -T.C.I: Cost of Project: 1092.10 Lakhs
Return: 26.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Xanthan Gum (Food and Oil Drilling Grade)

Xanthan gum is a polysaccharide with many industrial uses, including as a common food additive. It is an effective thickening agent and stabilizer to prevent ingredients from separating. It can be produced from different simple sugars using a fermentation process, and derives its name from the strain of bacteria used, Xanthomonascampestris. It is a heavily used gum for the industrial uses in the food industry. Its thickening and binding qualities make it a very useful cooking aid food additive in bakery products and dairy uses. ? The global xanthan gum market is expected to expand at a very positive CAGR of 7.7% in terms of revenue, between 2016 and 2024. This revenue is expected to reach as much as US$1.25 bn by the end of 2024. The global xanthan gum market is expected to expand at a CAGR of 7.3% for the above forecast period. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Ace Gum Inds. Pvt. Ltd. • Aditya Chemicals Ltd. • Asha Ram & Sons Pvt. Ltd. • Chimique (India) Ltd. • Exemplarr Worldwide Ltd. • Hindustan Gum & Chemicals Ltd.
Plant capacity: Xanthan Gum Food Grade : 500 Kgs/Day Xanthan Gum Oil Grade : 600 Kgs/Day Plant & machinery: 120 Lakhs
Working capital: -T.C.I: Cost of Project: 318 Lakhs
Return: 26.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Setting Up a Hospital in India

Setting Up a Hospital in India. Investment Opportunity in Healthcare Industry. Start a Hospital in India. The Healthcare market can increase three fold to US$ 372 billion by 2022. The hospital services’ market represents one of the most lucrative segments of the Indian healthcare industry. Various factors, such as increasing prevalence of diseases, improving affordability, and rising penetration of health insurance are fuelling the growth in the Indian hospital industry. Several private players are also entering the sector with new plans of establishing hospitals and health centers around the country. Healthcare has become one of India’s largest sectors - both in terms of revenue and employment. Healthcare comprises hospitals, medical devices, clinical trials, outsourcing, telemedicine, medical tourism, health insurance and medical equipment. The Indian healthcare sector is growing at a brisk pace due to its strengthening coverage, services and increasing expenditure by public as well private players. Healthcare scenario is fast changing all over the world. Today Indian health care industry is business driven and one can see entry of all sorts of service providers to be part of this massive multi core business, growing at the rate of 13% annually. Globalization and privatization have also changed the functioning of the healthcare system. The private health network is spreading fast throughout the country. Economic, political, social, environmental and cultural factors are influencing the health care and the delivery of the health care services. The Indian healthcare market, which is worth around US$ 100 billion, will likely grow at a CAGR of 23 per cent to US$ 280 billion by 2020. The healthcare market can increase three fold to US$ 372 billion by 2022. There is a significant scope for enhancing healthcare services considering that healthcare spending as a percentage of Gross Domestic Product (GDP) is rising. Rural India, which accounts for over 70 per cent of the population, is set to emerge as a potential demand source. India’s corporate hospitals are set to gain on rapid growth in health care industry in India. Healthcare has become one of the largest sectors in terms of employment and revenue generation in India comprising hospitals, medical devices, clinical trials, outsourcing, telemedicine, medical tourism, health insurance and medical equipment. The factors supportive of growth are growing incidence of lifestyle diseases, more medical awareness, technological advancements and increasing investments by public and private sector. The health care industry is witnessing healthy growth thanks to increased disposable incomes, insurance coverage, and health awareness among the population. The healthcare sector in India remains one of the largest sectors in terms of both employment and revenue generation. This significant growth within the healthcare industry has been facilitated by a rapid privatization of healthcare (particularly in secondary and tertiary healthcare services). Hospitals constitute ~70% of Indian healthcare market with increasingly dominant role of private sector. Private players have established a dominating presence in specialty health care. The market size of private hospitals is expected to grow at a CAGR of 19.2 % to reach ~U.S. $ 120 billion by 2020 from its current size of ~U.S. $ 50 billion. Key Drivers for Growth of Hospital Business in India • 500 Million Additional middle class by 2025. • Less than 25% of population is currently covered by insurance. At the current rate of growth of insurance business the Insurance penetration is likely to reach up to ~ 45% of population by 2020. • Growth in insurance business is most positive for private sector hospitals. Health insurance provides affordability to high end medical treatment. Tags Setting Up a Hospital in India, How to Start a Hospital Business?, Hospital Business Plan, How to Start a Hospital Business In India, Business Plan for Hospital, Starting a Hospital Business, Hospital Business Plan, Hospitals Business Opportunity in India, Profitable Healthcare Business Ideas in Medical Industry, Business Opportunities in Hospital Sector, Healthcare and Medical Business Ideas & Opportunities, Business of Health Care, Healthcare Business, How to Open Your Own Hospital, Starting Your Own Hospital, Setting Up of Super-Specialty / Multi-Specialty Hospitals, Multispeciality Hospital, Setting Up of a Super Specialty Hospital, Project Report on Hospital, How Does One Start a Hospital in India?, How to Open a Private Hospital, Want to Start Health Care Business?, Best Hospital In India, Project Report on Setting Up Hospital In India, Business Ideas for Start-Ups in Healthcare Industry, Health Care Business, Healthcare Business Ideas, How do I Start Health Care Business, Business Ideas to Start Healthcare Business in India, Healthcare Business Ideas & Opportunities, Health Care Business Ideas that You Can Start Today, Starting Healthcare Business, Profitable Healthcare Business Ideas, Setting Up a Super Specialty Hospital in India, Business Plan for Multispeciality Hospital, Multispeciality Hospital project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Multispeciality Hospital Projects, Project profile on small scale industries, How to Start Multispeciality Hospital in India, New project profile on Multispeciality Hospital, Project Report on Hospital, Detailed Project Report on Hospital, Project Report on Hospital, Pre-Investment Feasibility Study on Hospital, Techno-Economic feasibility study on Hospital, Feasibility report on Hospital, Free Project Profile on Hospital, Project profile on Hospital, Download free project profile on Hospital, Industrial Project Report, Business consultancy, Business consultant, Project identification and selection, Preparation of Project Profiles, Startup, Business guidance, Business guidance to clients, Startup Project for Hospital
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Business Ideas to Start. Manufacturing of Multiblade Safety Razor

A safety razor is a shaving implement with a protective device positioned between the edge of the blade and the skin. The initial purpose of these protective devices was to reduce the level of skill needed for injury-free shaving, thereby reducing the reliance on professional barbers. The term was first used in a patent issued in 1880, for a razor in the basic contemporary configuration with a handle attached at right angles to a head in which a removable blade is placed (although this form predated the patent). Plastic disposable razors and razors with replaceable blade attachments are in common use today. Razors commonly include one to five cutting edges, but sometimes up to seven edges. The basic form of a razor, "the cutting blade of which is at right angles with the handle, and resembles somewhat the form of a common hoe", was first described in a patent application in 1847 by William S. Henson. This also covered a "comb tooth guard or protector" which could be attached both to the hoe form and to a conventional straight razor. Gillette’s newest shaving system has just one blade, a light plastic handle and a sharply lower price. The move by P&G is to aggressively push into emerging markets for new customers and growth. That focus is forcing P&G to be more modest on scale and more flexible on price. Gillette commands about 70% of the world’s razor and blade sales, but it lags behind rivals in India and other developing markets, mainly because those consumers can’t afford to buy its flagship products. Single-Edge Razors The first safety razors used a single-edge blade that was essentially a 4 cm long segment of a straight razor. A flat blade that could be used alternately with this "wedge" was first illustrated in a patent issued in 1878, serving as a close prototype for the single-edge blade in its present form. New single-edge razors were developed and used side-by-side with double-edge razors for decades. The largest manufacturers were the American Safety Razor Company with its "Ever-Ready" series, and the Gem Cutlery Company with its "Gem" models. Although single-edge razors are no longer in production they are readily available. Blades for them are still being manufactured both for shaving and technical purposes. Indian men are becoming more conscious about their looks. They want to look better and more appealing physically to get more attention. The influence of the western culture, along with the rise of the Indian models, sportsmen and actors in promoting the wellness products are taking this industry to a new level as aspiring adults find their icons groomed and well-dressed. They want to look and perform like them. The grooming industry has opened all doors for aspirants like them where they can maneuver and improvise their looks with the aid of various trending products and grooming techniques. Double Edged Razor Blades The true genius of the double edged razor blade is how it is bent over and held in tension within the razor. This simple engineering technique allows the blade edge to be held very firmly in a precise position whilst using the minimum amount of steel in that blade. Hence double edged blades can be extremely thin and a thousand of them only weigh a few ounces. However this is still a massive amount of steel compared to multibladed system razors that only have an edge about 1mm deep made of steel which is then mounted in plastic. Double edged blades have been in manufacture for over 100 years (though it was only in the 1930s that they became as thin as they are today) so their production is not rocket science. However putting a superb edge (for that is what is needed) on such a thin piece of steel in a mass manufacturing process is not easy. Most of the world’s razors are made in a very small handful of factories around the world such as Gillette in Manuas, Brazil and St Petersburg, Russia, Vidyut in Bombay, India and Lord in Alexandria, Egypt. The manufacturing processes are proprietary and partly secret. The plants are capital intensive, contain a lot of technology and run at very high speed.. ? Market Outlook The shaving market in India is estimated at around Rs 1,500 crore. The market is growing at around 7-8 per cent annually. Gillette is the market leader in razors and blades. Its market share has been growing consistently. A significant percentage of this market comprises consumers who get their shaves done at salons. The market size of India's beauty, cosmetic and grooming market will reach $ 20 billion by 2025 from the current $ 6.5 billion on the back of rise in disposable income of middle class and growing aspirations of people to live good life and look good, according to Assocham. To suit consumption across difference levels of purchasing power, FMCG companies are coming out with variety of products in different price range. The rural population too is joining the mainstream with improvement in linkages with the cities by roads, telecommunication and the firms reaching out. The compound annual growth rate (CAGR) of the men grooming industry will increase by 17% by the end of 2020. The adoption of western culture, increased disposable income, elevated standard of living, and urbanisation is contributing to the growth of the grooming industry for both the genders. Men are now spending a handsome part of their income as a disposable amount for their grooming sessions in spas and salons. The wellness and beauty grooming market in India will double its figure to INR 80,370 Crore in between 2017-18, as projected by a KPMG Wellness report. Tags Razor Blades Made In India, Double Edge Razor Blades, Razor Blades Factory, Razor Cartridges and Blades, Manufacturing of Disposable Razor, Razor Blade, Shaving Razor, How It's Made Traditional Razor Blades, Razor Blade Project, Production of Razor Blade, Double Edge Blade, Safety Blade in India, How a Shaver Is Made In India, Razor Factory, Safety Razor Manufacturing, Multi Blade Razor Manufacturing, Stainless Steel Double Edge Razor Blades, Shavers Manufacturing, How to Make: Razor Blade, Razor Manufacturing Process, Razor Blade of Razor Wire Making , Manufacturing of Razor Blade, How Safety Razor & Double Edge Blades are Made, Safety Razor Manufacturing, Razor Making, Razor Blade of Razor Wire Making, Small Business Manufacturing Ideas for Razor Blade Manufacturing Business, Razor Blade Production, How Razor Blade is Made, Razor Blade Producer, Razor Blade Manufacturer?, Startup for Razor Blade, How to make Blade Razors, Manufacturing Process of Razor Blade, Shaving Razor Blade Manufacturing, Razor Blade Manufacturing Unit, Razor Blade Production, Blade Manufacturing Unit, Razor Manufacturing Process, How are Straight Razors Made, How to Manufacture Razor Blade, How to Start a Razors & Razor Blades Business, Start a Razor Blade & Shaving, Blade Manufacturer Plant, Blade Manufacturing, Blade Manufacturing Processes, Manufacturing Process of Blade, How Blades are Made, Blade Production, Industrial Blades Production, Advanced Blade Manufacturing, Safety Razor Blades Industry, Design and Manufacturing of Blades, Blade Manufacturing Considerations, Razor Blade Manufacturing Plant, Production of Razor, How Blades are Made, Safety Razor Manufacturing Plant, Multi Blade Safety Razor Processing Project Ideas, Projects on Small Scale Industries, Small Scale Industries Projects Ideas, Multi Blade Safety Razor Based Small Scale Industries Projects, Project Profile on Small Scale Industries, How to Start Multi Blade Safety Razor Processing Industry In India, Multi Blade Safety Razor Processing Projects, New Project Profile on Multi Blade Safety Razor Processing Industries, Project Report on Multi Blade Safety Razor Manufacturing Industry, Detailed Project Report on Multi Blade Safety Razor Project Report on Multi Blade Safety Razor, Pre-Investment Feasibility Study on Multi Blade Safety Razor, Techno-Economic Feasibility Study on Multi Blade Safety Razor , Business Plan For a Startup Business, Great Opportunity For Startup, Small Start-Up Business Project, Project Report For Bank Loan, Project Report For Bank Finance, Project Report Format For Bank Loan in Excel, Excel Format of Project Report and CMA Data, Project Report Bank Loan Excel, Detailed Project Plan Report on Multi Blade Safety Razor
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 85 of 304 | Total 3040 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 85 303 304   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top