Google Search

Search

Already a Member ?

Best Business Opportunities in Kuwait, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 15 of 23 | Total 229 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 22 23   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Profitable Business of Lithium Ion Battery Pack

Two electrodes are separated by an electrolyte in a lithium ion (li-ion) battery. In almost all lithium-ion batteries, there are three layers: two electrodes (the cathode and anode) separated by a separator layer made of synthetic organic polymer material. The top electrode, the cathode, is negatively charged, while the bottom electrode, the anode, is positively charged. The separator acts as an insulator, preventing charges from freely travelling across the electrodes until electrons are pushed through it by a device or power source from one electrode to the next. A lithium iron phosphate (LFP) battery is a type of lithium-ion battery that can charge and discharge at high rates when compared to other types of batteries. It's a rechargeable battery with a LiFePO4 cathode, hence the name. A variety of properties distinguish lithium iron phosphate batteries, including: • Increased safety • Higher power density • Lower discharge rate • Flat discharge curve • Less heating • More charge cycles Lithium iron phosphate batteries differ from other lithium-ion batteries in that they may deliver a constant voltage and have a longer charge cycle, ranging from 2000 to 3000 cycles. LFP batteries are both environmentally friendly and structurally sound. They have a low energy density and a low discharge rate. In comparison to other batteries, they don't become hot readily and stay cool. Because the battery's composition prevents thermal runaway, it's considered safe for home use. Phosphate-based technology is more thermally and chemically stable than Lithium-ion technology created with other cathode materials, resulting in improved safety. Lithium phosphate batteries are incombustible in the event of charge or discharge mismanagement; they are more stable in overcharge or short circuit conditions, and they can withstand high temperatures without degrading. Lithium Iron Phosphate has a wide range of properties that allow for the production of a wide range of battery sizes, and it has found key applications in the following areas: 1) Large electric vehicles include buses, electric automobiles, tour buses, hybrid vehicles, and other attractions. 2) Light electric vehicles, such as electric bicycles, golf carts, tiny cars, forklifts, and electric vehicle cleaning wheelchairs Power tools include lawn movers, electric saws, and electric drills, to name a few. 4) Toys that can be controlled remotely, such as cars, boats, and planes. 5) Storage solutions for solar and wind energy. 6) Warning lights, UPS, miner's lamp, and other emergency lights 7) Small and portable medical equipment and devices. 8) Cell phones, laptops, camcorders, iPods, and other technological gadgets 9) Lithium ion batteries are used in a number of cutting-edge electric vehicles, notably the first of its kind, the Tesla Roadster. It takes around 3.5 hours to fully charge the 6831 lithium ion cells in this vehicle's batteries, which weigh half a tonne (1100lb). The lithium-ion battery market in India is expected to grow at a CAGR of 34.8 percent from 2019 to 2024. Factors like lowering lithium-ion battery prices and the emergence of new and exciting markets. Electric vehicles and energy storage systems (ESS) for commercial and residential applications are projected to propel the lithium-ion battery industry in India. The lack of major reserves needed for lithium-ion battery production is expected to pose a barrier to local production and the country's lithium-ion battery market. The increased use of electric vehicles in India is projected to enhance the need for Lithium (Li)-ion battery production. The most prevalent type of electrochemical energy storage is lithium-ion batteries. The principal electrolyte component in these rechargeable batteries is Li-ion. Lithium, as well as other minerals like cobalt, aluminium, and copper, must be procured and mined in order to manufacture Li-ion batteries. The Li-ion battery manufacturing process includes the fabrication of cell components (electrodes, electrolytes, and separators), cell and module production, battery pack assembly, and component integration. The Li-ion battery manufacturing industry in India is still in its infancy. However, the country has the potential to become a major producer of Li-ion batteries in the next years. The Li-ion battery manufacturing industry in India can be developed in three stages: stage one (2017 to 2020), stage two (2021 to 2025), and stage three (2020 and beyond) (2020 to 2050). From 2026 to 2030. The country's principal goal for stage one, which runs from 2017 to 2020, is to create a favourable industrial climate.
Plant capacity: Lithium Ion Battery Module Cap. 0.4 KWH 595.2 Module per day | Lithium Ion Battery Module Cap. 4.8 KWH: 48.8 Module per day | Lithium Ion Battery Module Cap. 5 KWH: 46.8 Module per day | Lithium Ion Battery Module Cap. 10 KWH: 23.4 Module per dayPlant & machinery: 36 Cr
Working capital: -T.C.I: Cost of Project: 50 Cr
Return: 27.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Make Profit by Producing Polyester Textured Yarn from Used Pet Bottle. Investment Opportunities in Textile Industry

It is a kind of composite yarn which composed of polyester staple fiber and polypropylene fibers as filament with teflon lubricant. It has higher tensile strength, abrasion resistance, flexibility, dyeing and wearability than similar textile products. They are no chemical substances remaining after recycled production. Our PET material imported directly from Coca Cola bottling factory could guarantee consistent quality too because Coke makes strict control of their PET bottles making procedures! Visit this Page for More Information: Start a Business in Textile Industry Polyester texturised yarn (PET) is a fabric made of polyester, created using a process that combines individual polyester filaments with an elastic, sinuous yarn structure. It is primarily used in carpets. The 'texturising' in its name refers to its fuzzy feel and loops, which resemble twisted tufts of cat's hair or carpet pile; it has also been described as resembling strands of steel wool. PET is primarily made by recycling plastic bottles into polyester fibres. Read Similar Articles: Textile Industry Benefit of Starting Polyester Texturised Yarn from Used Pet Bottle Business Use pet bottle fibre to make Polyester textured yarn. You can create different look, feel and style with unique touch of recycled material. And you don’t have to worry about problems related with pet bottle waste in our ecosystem. It is not only a good choice for running new business, but also a green idea to help keep our environment safe. Besides, it is profitable as well as creative product that your customers are going to love to use. Related Project: Business Plan for Polyester Textured Yarn From Used Pet Bottle This technique creates final fabric that has high aesthetic quality and competitive price when compared with standard textile fabrics. In fact we have observed market acceptance among consumer even before trials are conducted due to its unique appearance resembling hairy or feathery skin or other eco-friendly natural materials. Watch other Informative Videos: Textile Industry Manufacturing Process: Polyester texturised yarn (PET) is prepared by processing PET bottles, which are considered as secondary raw materials. In order to prepare PET yarn from PET bottle, firstly a debundling unit is required for isolating cuttings and removing labels from bottles. After that, bottles are scrapped in a shredder to obtain chopped PET flakes having different sizes. Watch Video: Production of Polyester Textured Yarn from Used Pet Bottle | Yarn Made From Recycled Plastic Thus obtained flakes of PET are dissolved in hot caustic soda solution so as to get a viscose solution at 12% solids. The resulting polymer melts are collected in cone bottom tank and spun into filaments using state-of-the-art high speed single screw extruder with temperature controlled cooled air. Related Feasibility Study Reports: Textile Bleaching, Dyeing, Printing And Finishing, Textile Auxiliaries Projects Market Outlook: Polyester Yarn market size is expected to gain market growth in the forecast period of 2021 to 2025, with a CAGR of 7.4% in the forecast period of 2021 to 2025 and will expected to reach USD 110580 million by 2025, from USD 83210 million. Polyester is the most desirable and demanded fiber in the textiles industry is owing to its improved physical properties, lower price, versatility, and recyclability, which provides a unique set of benefits incomparable by any other natural or synthetic fibers. The demand for both drawn texture yarn and fully drawn yarn is growing in the textile industry. However, with the development of post-treatment technology and lower cost of fully drawn yarn, it is likely to outsell drawn texture yarn over the next few years. Read our Books Here: Textile Spinning, Processing, Natural Fibers, Natural Dyes, Pigments, Textile Dyes, Pigments, Dye Intermediates, Woollen Spinning, Weaving, Knitting, Dyeing Technology Global polyester yarn market size was valued at USD 10.67 billion in 2021 and is expected to grow at a CAGR of 3.2% during 2021–2025. High demand for polyester from Asia Pacific region primarily from China, India, and Japan has been driving global polyester yarn market growth over next few years. For More Details: - https://bit.ly/3pjGO2I See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: 1
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Invest in Highway Guard Crash Barrier Industry Start Manufacturing Business of Highway Guard Crash Barrier(Roll Forming with Metal Beam and Galvanizing Plant)

The guardrail system for protecting highways includes a number of different components, including horizontal and diagonal guardrails, end terminals and crash cushions. The main component in highway guardrail systems is a thick post that resembles a small telephone pole. Visit this Page for More Information: Start a Business in Industrial & Engineering Products Industry When damaged, these posts are difficult to remove from roadsides. Therefore, replacing them or parts of them with new units saves money in maintenance and road closures while increasing safety at accident sites. A guardrail, sometimes referred to as a guide rail or traffic barrier, is a railing system placed alongside roads and highways. Read Similar Articles: Engineering Goods Projects Its purpose is to reduce vehicular accidents and fatalities caused by vehicles leaving their lanes or crossing roadways. While guardrails have proven effective at preventing head-on collisions and vehicle rollovers. Watch Video: Manufacturing of Highway Guard Crash Barrier: Roll Forming with Metal Beam and Galvanizing Plant Uses The main use of these installations is to prevent traffic from veering off the road and into oncoming traffic. The guardrails can also help drivers avoid driving into a flooded or shallow area of water, known as hydroplaning. Some of these installations are designed with sensors that activate flashing lights at night, alerting drivers to stay in their lane on curvy roads. They’re also used to manage heavy flow of trucks carrying goods. Related Project: Roll Forming With Metal Beam, Highway Guard Crash Barrier And Galvanizing Plant Thus, these technologies save both time and money for transportation services. These metal barriers come in different types and shapes for varied uses. Highways authorities set up metal barriers made up of straight lines along busy highway routes to protect people from any accidents like collision, head-on collision, rollover, run-off etc., but some metal barricades aren’t installed straight; they curve upwards and contain several alternating sections between short posts along strategic locations such as curves or intersections where an accident is most likely to occur. In addition, these materials have built-in devices that force vehicles away from an intersection if they don’t slow down when approaching too quickly. Traffic officials who plan to erect them first dig trenches around specific areas where metal barriers need to be placed; thereafter, workers place strong steel posts inside each trench. Afterwards, crews pour concrete around each post. Watch other Informative Videos: Industrial & Engineering Products, Manufactured Goods, Mechanical, Automobile, Metal, Metallurgical, Wire, Aluminum, Copper Products, LPG Cylinder Benefits of Starting Highway Guard Crash Barrier The benefits of using a highway guardrail are obvious. It reduces damage to vehicles that have been involved in an accident, and even helps save lives by reducing injuries sustained in a crash. Of course, if you start your own guardrail manufacturing business, you can expect some significant financial perks as well. That’s why many entrepreneurs choose to build their businesses around these crucial traffic protectors. Here are three ways that a guardrail manufacturing company owner can benefit from his or her business. (1) Improve Safety for Drivers – You may not think about safety every day, but it should be near the top of your priority list when you get into business. By selling high-quality guardrails and other safety products, you can help prevent many devastating car accidents and make travel much safer than it would otherwise be. (2) Increase Profits – When people need to replace broken guardrails on roadways throughout their towns, they will often head directly to local retailers like hardware stores. If you instead set up shop as a manufacturer, though, you could snag many customers who might otherwise ignore retail locations. You’ll also likely be able to charge more for your product because of its quality. (3) Provide Additional Services – Many small towns don’t have guardrail manufacturers right in their communities yet. Related Feasibility Study Reports: Industrial & Engineering Products, Manufactured Goods, Industrial Engineering Products. Mechanical, Engineering, Automobile Industries, Metal, Metallurgical, S.S. Utensil, Wire, Aluminum, Brass, Copper Products, LPG Cylinder and Valves Market outlook In the following years, the market for traffic barriers is expected to increase at a rapid pace. Growing infrastructure and investment in construction activities are two major aspects driving the market need for traffic barriers. On highways, concrete and steel traffic barriers are chosen since they limit the number of accidents. Regardless, the benefits of concrete traffic barriers over steel traffic barriers are projected to increase demand for concrete traffic barriers around the world. Better urban planning is required to accelerate urbanisation in Asia Pacific's growing economies. With rising concerns about safety in public locations such as airports, hospitals, schools, and government and business institutions, the need for traffic barriers is expected to increase significantly. Read our Books Here: Steel, Iron, Ferrous, Non-Ferrous Metals With Casting And Forging, Aluminium, Ferroalloys Technology More investment opportunities and a functional transportation network generate growth chances for the traffic barriers industry as cities grow. Furthermore, increasing the vehicle fleet will result in more traffic bottlenecks on the highways as well as random accidents when travelling at high speeds. As a result, the government is likely to install a huge number of road barriers to prevent accidents and crowd management. Furthermore, in the event of riots, traffic barriers can be used to manage traffic, and the same can be used to prevent illegal access at high security bases or priority places such as (government buildings, airports, and so on). For More Details: - https://bit.ly/3K8WTjU See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports #DetailedProjectReport #BusinessIdeas #StartupBusinessIdea #EntrepreneurIndia #NPCSProjects #BusinessConsultant #ProjectReport #Startup #BusinessOpportunity #BusinessPlan #RollForming #Metal #Metalbeam #HighwayGuardCrashBarrier #ManufacturingofHighwayGuardCrashBarrier #ProductionofHighwaySafetyGuardrail #GalvanizingPlant
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Blended Energy Dense Food Production Business | Food Fortification Industry

Energy dense food refers to foods that are lower in calories, high in nutrient and fiber content. The nutrients come from micronutrients and electrolytes that provide people with a boost of energy for their workout or task at hand. Energy dense food is geared towards anyone who works out on a regular basis and needs a convenient source of fuel to provide them with energy throughout their day. Visit this Page for More Information: Start a Business in Cereal Processing Industry Uses Micronutrient fortified food (MFF) is a category of food products that have enhanced quantities of vitamins and minerals. Energy dense foods are foods which have high calorie density per unit weight or volume. Energy dense foods are usually called as weight gainer. Hence, MFF becomes energy dense food for normal individuals by adding energy nutrients to it, thus providing more calories to their body through low-weight dietary products. Read Similar Articles: Cereal Food Processing This helps in treating malnutrition due to less intake of food with required nutrients in some populations where people live on minimal income and has no money to buy nutritious food. Thus, by manufacturing MFFs one can contribute toward healthy society without any extra cost. It will also benefit economically poor people who cannot afford good nutrition but need adequate nutrition like lactating mothers, pregnant women and growing children who need extra calories during critical period of life cycle development. Watch Video:- Food Fortification Business | Micronutrient Fortified Blended Energy Dense Food Manufacturing Benefits of Starting Micronutrient Fortified Energy Dense Food Business It's a new era of health food, and everyone wants more vitamins in their meals. That is why energy rich foods fortified with micronutrients have become so popular in an increasingly health-conscious market. This industry is growing in popularity, providing chances for entrepreneurs who want to establish themselves as industry leaders and sell high-quality, healthy products to people all over the world. Here are some of the advantages of beginning a micronutrient-fortified, energy-dense food business: • Added Product Value – Those little nutrients that have been lost from our daily diets can be added back into foods, using quality ingredients like brewer’s yeast powder. Your product will be perceived as having extra value simply because it contains added nutrients, making it superior to similar offerings on supermarket shelves. • Cheaper Ingredients – Adding essential vitamins and minerals to your products will not add much cost. You could use cheap, but nutrient-rich grains like barley or rye instead of wheat; use brewer’s yeast or cornstarch instead of sugar; or invest in chlorella which provides several essential nutrients at no additional cost. Related Project: Start Production Business of Micronutrient Fortified Energy Dense Food • There are no risks associated with food storage and transportation - Foods lose freshness with time. However, by supplementing them with vitamins and nutrients, they will live longer. Pickles that have been salt-preserved, for example, last longer than pickles that have not been processed. Because micronutrients extend shelf life, there are fewer risks connected with keeping and shipping these foods because they last so long. • Customers who are happy – Consumers want newer options to be available at all times. You can give them exactly that with micronutrient fortification. What more could a client want for than a wide choice of delightful items created from excellent ingredients and providing optimal nutrition? • Increased Competitiveness - When customers see a healthier choice offered by one company over another, they will respond favourably. This puts pressure on competitors to follow suit, providing your brand an advantage and allowing it to stand out among similar brands. Watch other Informative Videos: Food Processing and Agriculture Based Projects Manufacturing Process: Meal that is high in macronutrients such as fat, carbohydrate, protein, and calories is referred to as energy dense food. Foods that are high in energy keep people content for extended periods of time, preventing them from overeating. Freshness, taste, and a crisp crunchy texture are the most critical characteristics for producing energy packed foods. Another significant element that plays a part in energy dense food is maintaining constant quality. Finally, because presentation is always appealing to customers, creating beautiful packaging for calorie dense meals is also critical. Innovative technologies may be used to produce micronutrient enhanced energy dense foods in a variety of ways. The method chosen will be determined by the amount of micronutrients that should be added to food in addition to normal nutrients like carbs, proteins, and fats. Depending on their needs, manufacturers can use liquid fortification, dry fortification, or frozen fortification processes. When it comes to liquid fortification, adding vitamins and minerals directly to beverages is the most common way. Frozen fortification is most commonly employed in mass processing, when water used to manufacture ice creams, juices, and other products is fortified with critical vitamins and minerals prior to freezing. Nutrients such as vitamins and minerals are added to a solution and then dried at high temperatures in a drying machine for dry methods. Manufacturers can enrich their products with all vital nutrients by adopting appropriate technology for making micronutrient fortified energy dense meals. Related Feasibility Study Reports: Cereal Processing (Rice, Dal, Pulses, Oat, Wheat), Sugar and value added Products and Projects Market outlook The market value is expected to reach US$ 234,253.7 Mn by 2031, with a CAGR of 6.3 percent between 2012 and 2031. Food fortification, or the adding of micronutrients like vitamins and minerals to foods and condiments, has been used by food producers for almost a century. Companies are boosting their food formulations with vitamin and mineral premixes as the present consumer population becomes more aware of the benefits of nutritionally filled foods. Read our Books Here: Cereal Food, Cereals And Cereal Products Processing Industry Throughout the preceding decade, food fortification was defined as the process of adding vitamins and minerals to commonly consumed foods in order to increase their nutritional worth. It's a tried-and-true, safe, and cost-effective way to improve diets and prevent and treat micronutrient deficiencies. As a result of rising consumption of vitamin-enriched meals, the worldwide fortified foods business has seen tremendous expansion in recent years. Throughout the forecast period, rising health concerns and an increase in disease rates will be the primary drivers of the fortified foods market. The market is estimated to grow at a CAGR of 6.3 percent between 2021 and 2031. For More Details: - https://bit.ly/3hANYvg See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: 1
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of IVD Strips (Glucose, Urine & Pregnancy) | Profitable Business Opportunities in Medical Sector

An in IVD Strips is used to obtain a visual measurement of an individual’s glucose level, urine or pregnancy. The strips are most commonly used in home use for glucose and urine measurement, but also have application in hospitals and clinics. These strips are made with small sample cells that contain very specific reagents on their surface. When human blood or urine comes into contact with these reagents, they will change color and display that change to indicate measured parameters such as glucose levels or urinary tract infections. Visit this Page for More Information: Start a Business in Medical Disposables Industry Uses of IVD Strips (Glucose, Urine & Pregnancy) In laboratories, IVD strips are used to check for abnormalities in blood and urine. This is especially beneficial for pregnant women who are subjected to frequent tests like urine and blood glucose levels. The strips allow doctors to track any changes in pregnant women with gestational diabetes or pre-eclampsia so that they can treat them early. People with Type 2 Diabetes can use IVD strips to test their daily glucose levels on a regular basis. It enables them to monitor how well their medication is functioning and change it as needed to attain the best results. Diabetics who wish to keep an eye on their sugar levels even when they aren't utilising their insulin shots use these strips. This way, they'll detect if there's a surge in sugar levels right away and take appropriate action. Read Similar Articles: Disposable Medical Products These strips are also useful for other blood tests such as haemoglobin levels and cholesterol counts. These biometric indicators are used by doctors to determine whether you need to change your diet or exercise more in order to improve your outcomes. Instead of telling patients to do anything without understanding their past, they offer them a good notion of what kind of lifestyle modifications they should make based on lab results. Similarly, IVD strips can be used in hospitals to monitor health metrics and vital signs throughout procedures such as surgery and labour. Medical specialists are able to ensure the safety of both mommy and baby at all times as a result, preventing difficulties from occurring. IVD strips can be used in home care circumstances such as post-surgery rehabilitation, in addition to procedures. Read our Books Here: Disposable Products (Medical, Surgical, Thermocol, Plastic, Paper, Domestic and General Products) - Use And Throw Items, Single Use Items, Disposable Take-Away Packaging, Disposable Items Manufacturing Market Demand Blood glucose and urinalysis testing need the use of test strips. These test strips are used to monitor or regulate the blood glucose level of diabetic patients. It enables people who are pre-diabetic or diabetic to regularly monitor their blood glucose levels without having to visit a clinic or diagnostic laboratory. The global test strip market is predicted to increase significantly over the forecast period, owing to the rising prevalence of diabetes around the world. The global in-vitro diagnostics (IVD) market, which is predicted to grow rapidly in 2020 and 2021, has had little impact on COVID-19. Related Feasibility Study Reports: Surgical, Medical Plastics, Medical Disposables, Disposable Medical Products used in Hospitals The global in-vitro diagnostics market is expected to be valued USD 83.4 billion in 2020, according to a recent estimate. The market will increase at a 4.5 percent yearly rate from 2021 to 2027. (CAGR). The usage of IVD in COVID-19-related testing has increased, resulting in this increase. Furthermore, recent technologies that automate in vitro diagnostic systems for healthcare professionals have enabled more efficient, accurate, and error-free diagnoses, which is expected to fuel market growth even further. Why You Should Start This Business The medical industry is one of, if not the fastest growing in terms of new ideas and products. The global market for in vitro diagnostic (IVD) equipment and tests is predicted to reach $67.2 billion. It's time to capitalise on one of today's best investment opportunities, with high profit margins and a low cost of entry into production. According to a recent study, tighter regulation and changing market dynamics, such as an increase in special needs patients in India and fewer blockbuster drugs from companies like Roche and Pfizer, will result in an oversupply in developing countries in five years. Watch other Informative Videos: Surgical, Medical Plastics, Medical Disposables, Disposable Medical Products used in Hospitals We've discovered three basic starting points for starting your own business based on these and other factors: 1. Establish a solid distribution network 2. Purchase a semi-automated IVD system. 3. Oligonucleotide Synthesis High growth potential in categories such as diabetes testing, infant screening, and genetic testing, along with low regulatory risk, make IVD device manufacturers ripe for big returns on investments at all stages, from development to commercialization. Another reason IVD equipment is a better investment than other industries such as precision agriculture or green energy is that once a device is designed, there are no more iterations to go back to; only incremental changes that sell off last year's models are available. All of this is great news for investors searching for an asset class that is different from stocks and bonds but yet has ample liquidity within its ecosystem. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Be Part of the Growing Diabetes Care Industry. Start a Disposable Blood Lancet and Insulin Pen Needle Business Today!

Disposable blood lancet is an instrument with very sharp needle, it will prick skin to collect your blood sample. While Disposable insulin pen needle is made of plastic or metal, it can be loaded on insulin pen, which can inject insulin under your skin. Both of them are disposable products, but they are widely used in hospital and doctor's office. Many patients require such devices to draw their blood samples or administer subcutaneous injections. For users who are diabetic, disposable pen needles may help them avoid using sharps containers for disposal. Visit this Page for More Information: Start a Business in Medical Disposables Industry Uses of Disposable Blood Lancet and Insulin Pen Needle: Disposable Blood Lancet and Insulin Pen Needle are used to draw blood from veins. They are thin, hollow tubes that can be filled with air or fluid. The top of Disposable Blood Lancet has a plastic piece that has holes in it. When air is forced into the tube by pressing on it, it fills up with air inside of Disposable Blood Lancet which causes it to expand making them easier to push into a vein. It works similarly for drawing out blood when needles are suctioned onto a larger syringe. After pulling out any liquid through tubing connected to an outside source, an individual will gently squeeze Disposable Blood Lancet until they have removed as much fluid as possible before disposing of it and using a new one. It is important not to damage any tissue while trying to get out any remaining blood. Read Similar Articles: Disposable Medical Products Manufacturing Process: The disposable blood lancet is made of stainless steel and goes through five steps in the manufacturing process. The basic material for disposable blood lancets is a cold rolled strip comprising compounds like nickel and chromium. It must be sanitised by a heating process in order to remove pollutants. As a result of the annealing process, it will become more stable and have better physical properties. To achieve the desired dimension, grinding and polishing techniques are used. CNC milling machines will then shape them into a circular shape with the required length. An etching treatment should be conducted during the surface oxidation process. Read our Books Here: Disposable Products (Medical, Surgical, Thermocol, Plastic, Paper, Domestic and General Products) - Use And Throw Items, Single Use Items, Disposable Take-Away Packaging, Disposable Items Manufacturing An X-ray detection method can be used to ensure its quality. It can, for example, verify that a micro needle was made appropriately. Typically, 10-20% of needles are rejected in the production line due to insufficient quality control inspection at the end of the line. This step has a high cost but is very important in the Disposable Blood Lancet manufacturing process because your clients do not want to tolerate any failure goods while utilising them in hospitals or other medical institutions. Finally, the Disposable Blood Lancet packing procedure begins, with personnel applying labels to each container before transporting it to the warehouse. Benefits of Starting this Business: Disposable blood lancets are high-quality and affordable, and come in a variety of shapes. There is no need for sterilisation with disposables, and they are safe, clean, and simple to use. Consider investing in a disposable blood lancet manufacturing line if you want to start a new business that will make you a lot of money in a short amount of time. In no time, you'll be surrounded with affluent profits. Related Feasibility Study Reports: Surgical, Medical Plastics, Medical Disposables, Disposable Medical Products used in Hospitals Blood lancets are in high demand in both domestic and foreign markets as a result of rising population growth. Insulin pen needles that are disposable are also in high demand. As a result, you can benefit from investing in the production of these products. Disposable Blood Lancet with Insulin Pen Needle is an FDA-approved product that has received positive feedback from doctors, nurses, diabetes patients, high blood pressure patients, cholesterol patients, and others who are now using or have used it for treatment. This is a growing field of healthcare items that is gaining traction in the market as a result of rising health issues around the world. Market Demand of Disposable Blood Lancet and Insulin Pen Needle: Especially in hospitals, clinics, and medical supply stores, disposable blood lancets and insulin pen needles are in high demand. Doctors are in high demand for this drug since it helps to prevent the transmission of blood-borne illnesses to patients and staff working in these situations. It may also aid in the prevention of infection transmission by needle pricks. Although several manufacturers have started producing disposable blood lancets and insulin pen needles, there is always opportunity for more to enter the market. Many small enterprises are cropping up to manufacture disposable blood lancets and insulin pen needles at low prices, providing their products a wider market. Watch other Informative Videos: Surgical, Medical Plastics, Medical Disposables, Disposable Medical Products used in Hospitals In diabetes clinics, laboratories, and other healthcare settings, these devices are used on a daily basis to help people acquire clean blood samples on a regular basis. These gadgets come with instructions for safe use, so whether you use them on yourself or others, you won't have any serious health issues. It is simple to operate and only requires a few simple approaches. The hospitals and clinics classification is expected to develop at the fastest rate throughout the projected period, with a CAGR of 10.0 percent. This is due to an increase in the number of such healthcare institutions around the world, as well as an increase in the number of people suffering from chronic diseases, leading in a high rate of lancet procurement. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Metformin and Ciprofloxacin, The Active Pharma Ingredients Manufacturing Business. We have everything you need

Active pharmaceutical ingredients (APIs) are one of three types of active ingredients in a drug, along with excipients and additives. An API may be either synthetic or natural (i.e., isolated from other sources such as food products). APIs undergo stringent quality control testing before they can be sold to manufacturers who use them to make up medications. These drugs may contain only one type of API, or multiple APIs may be used together in an individual medication. Metformin hydrochloride is a guanidine biguanide derivative that is used to treat type 2 diabetes. 1, 1-dimethylbiguanide hydrochloride or N,N-dimethylimidodicarbonimidic diamide hydrochloride is its chemical name. Visit this Page for More Information: Start a Business in API Industry It's an antihyperglycemic medication that's taken orally and used with insulin to bring blood sugar levels down. It improves insulin sensitivity while reducing the amount of insulin required. Furthermore, it lowers circulating glucose levels by reducing glucose absorption from diet and gluconeogenesis. Its main function of decreasing hunger may also aid weight loss. Metformin inhibits the SGLT1 transporter, slowing glucose absorption in the gut and lowering hepatic glucose production. Ciprofloxacin is an antibiotic that is used to treat a variety of bacterial illnesses. It is a fluoroquinolone, a type of antibiotic that kills germs by preventing them from reproducing. It acts by either destroying or inhibiting the growth of bacteria. It belongs to the fluoroquinolone family of antibiotics, which work by preventing bacteria from duplicating DNA. Infections in the respiratory tract, skin, vaginal tract, urinary tract, and abdomen are treated with ciprofloxacin. Read Similar Articles: Pharmaceutical Industry Uses of Metformin and Ciprofloxacin Metformin is a biguanide anti-diabetic drug. It is used to treat type 2 diabetes by lowering blood sugar. This medication may also be used to treat other conditions as determined by your doctor. Ciprofloxacin is an antibiotic of fluoroquinolone class that is used in treatment of bacterial infections such as lung, skin, bladder, prostate (men only), and urinary tract infections. Active Pharma Ingredients are critical components for many drugs because they’re high purity ingredients that make or break thousands of pharmaceutical products around the world. Without Active Pharma Ingredients, most major pharmaceutical companies would cease to exist because they would not have anything to produce; without API manufacturing there would be no finished product on pharmacy shelves. Related Business Plan: Active Pharma Ingredients Metformin and Ciprofloxacin Production Business Manufacturing Process Active Pharmaceuticals Ingredients like metformin and ciprofloxacin are made in specialised facilities that follow rigorous quality guidelines. Pumping pharmaceutical-grade water into massive vats containing metformin hydrochloride (the active ingredient) and dissolving it into a solution is the first stage. A substantial amount of powdered calcium carbonate is added to neutralise any acidic components of metformin hydrochloride, resulting in a suspension. One of the main advantages of powder over solid pills is that it doesn't require any further blending or grinding before use. Related Feasibility Study Reports: Active Pharmaceutical Ingredient (API) Products, Bulk API Manufacturing After that, co-solvents are added to help dissolve dry powders like calcium carbonate and keep them in solution after they've been mixed with other ingredients. After various checks on acidity levels, temperature, and viscosity, mixing begins. Mixing alternatives include static mixers (two layers flowing at different speeds while passing one other), continuous conveyor belt mixers (continuous paddles rotating at different rates inside an enclosed drum), and ribbon blenders (continuous blender ribbon instead of paddles). The packaged products are transferred over conveyor belts and into boxes going for pharmacies all around the world after a last visual inspection. Because diabetes is both a hormone and a vitamin that helps regulate blood glucose levels, it affects millions of people. Watch other Informative Videos: Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Pharmaceutical Bulk Drugs Market demand of Metformin and Ciprofloxacin Pharmaceutical ingredients are used by the pharmaceutical industry to create novel medicines and improve the efficacy and efficiency of existing therapies. The global pharmaceutical market, and hence the demand for Active Pharmaceutical Ingredients, is growing at an alarming rate (APIs). Pharmaceutical businesses must make the most of their APIs in order to reduce medication development expenses and increase sales earnings due to the rising demand for new drugs. As a result, active pharmaceutical ingredients (APIs), which are relatively inexpensive high-purity molecules that can be used as starting materials to make sophisticated drugs with varying quality criteria, are in increased demand. Read our Books Here: Pharmaceutical, Drugs, Proteins Technology Handbooks From 2020 to 2027, the global metformin hydrochloride market is predicted to increase at a CAGR of 5.6 percent, reaching USD 331 million. The global rise in diabetes prevalence may be contributing to the market's growth. In addition, the ageing population is expected to propel this industry ahead. The rapid rise of the biotechnology and pharmaceutical industries is projected to benefit market growth. The market, for example, is likely to grow as the development of biosimilars continues due to their low cost. The Indian ciprofloxacin market is likely to grow rapidly over the forecast period. The ciprofloxacin market in India is being driven by the increased prevalence of renal disorders and eye infections, among other things. Moving the market forward, ciprofloxacin is a second-generation fluoroquinolone that is used to treat a range of ear infections, including otitis externa. Because of Ciprofloxacin's superior efficacy in treating infections of the excretory system, notably the renal and urinary systems, the market for this antibiotic is steadily growing. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Own a Plastic Optical Lenses Manufacturing Business. A Complete Business Plan on how to Start a Plastic Optical Lenses Manufacturing Industry

A lens is a transparent optical component that refracts light or other electromagnetic radiation and directs it to either a magnified or diminished image. The vast majority of lenses are made from transparent materials, such as glass, plastic, and polymers. A Lens is a spherical device in which an incident beam of light converges to a single point, while also being refracted at its surface in a direction parallel to itself. It can be used as both convex and concave. Visit this Page for More Information: Start a Business in Plastics and Polymers Industry Applications: They are available in various sizes and shapes which fit on a spectacles frame. The main application is to eliminate or reduce eyestrain as well as strain on vision especially for people who spend long hours in front of computer screens or work under harsh lighting conditions. They can be used by people who have undergone cornea transplant, cataract surgery, and certain cases of glaucoma, short-sightedness and far-sightedness. Read Similar Articles: Plastic Projects They can be worn over prescription glasses too. Generally opticians offer a range of standard lenses that come with anti-reflective coating to make them comfortable while reducing glare and eye fatigue caused due to reflections from light sources like computer monitors, mobile phones etc. These lenses generally give clear vision at all angles from horizontal to vertical planes but are not suitable for extreme high impact activities that involve sudden acceleration or deceleration like sports. Business Plan: Manufacturing Business of Plastic Optical Lenses Manufacturing Process The two stages of the plastic optical lens manufacturing process are preform and final processing. Preforms are created in a range of shapes and sizes at major plastic extrusion machines. The optical quality of raw materials is influenced by their properties during processing, whereas technical parameters (flow rate, temperature, and barrel length) and processing conditions influence their attributes during processing (running speed). Video Once created, plastic lenses are frequently injection-molded utilising small to medium injection moulding machines with a two-part clamping system. As a result, extremely low-cost goods are manufactured. One big advantage is that optics can be treated right after the mould is made. Because it has a high mechanical stability even when exposed to the weather, polycarbonate is a common optically transparent resin. Read our Books Here: Plastics and Polymers, Polyester Fibers, Pet & Preform, Medical, Expanded Plastics, Polyurethane, Polyamide, Polyester Fibers, Additives, Colourants and Fillers, Extrusion, Moulding, Mould Designs, Optical Glass, Reinforced, Films, HDPE, Thermoset Market demand With a 7.33 percent compound yearly growth rate, the global optical lens market will be worth $ 25,868.81 million by 2028. The optical lens market is predicted to grow significantly in the next years due to the increasing use of convex and concave lenses in the automotive industry. The market for passenger automobiles, commercial vehicles, and off-road vehicles is growing due to rising population, rising living standards, rising disposable income, expanding interstate trade, and expanding construction and mining operations. Download PDF: It's Time you should start your own Plastic Optical Lenses Manufacturing Business The optical lens is widely used in automobiles for mirrors and headlights, paving the way for the optical lens industry. Plastic is a widely used material for optical lenses in eyeglasses, sunglasses, and other devices. The market for such things is expected to grow rapidly, reaching USD 45 billion by 2025. Watch other Informative Videos: Plastics Projects There has been a significant growth in demand for plastic optical lenses, which are not only lighter and less expensive than glass optical lenses but also safer, as a result of rising understanding of the health hazards connected with long-term usage of glasses made of polycarbonate or other materials. Their premium quality, exceptional durability, and ability to provide wide vision angles make them both fashionable and comfortable, despite their higher manufacturing costs than those made of polycarbonate. Related Feasibility Study Reports: Plastics, Polymers and Resins, Polypropylene (PP), Polystyrene (PS), Acrylonitrile butadiene styrene (ABS), Polyethylene terephthalate (PET), Polyester, PA, Poly(vinyl chloride) (PVC), Polyurethanes (PU), Polycarbonate (PC), Polyethylene (PE)Projects Individuals spend substantial amounts of money on apparel and accessories, just as they do on lenses, therefore companies operating in the global market have profited from these aspects and have seen an increase in revenues over time. The global market for plastic lenses has been encouraged by increased awareness of safety dangers, lifestyle changes brought on by urbanisation and globalisation, and rising disposable income. Global sales are currently led by Asia Pacific, followed by North America.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

AAC (Autoclaved Aerated Concrete) Blocks Manufacturing Business from Silica Sand & Lime Stone Powder | Start Production Business in Construction Sector

Introduction Autoclaved aerated concrete Blocks made of high quality silica sand, lime stone powder and natural organic additive can be widely used in drainage, pavement and other fields. It is a kind of new building material with good autoclavability, elasticity and plasticity. it has very good waterproof effect, excellent mechanical property(high compressive strength)and nice outlook etc. its production line includes vibrating feeder, jaw crusher, vertical mixer, pre-drying machine , autoclave rotary kiln, cooling belt conveyor. Visit this Page for More Information: Start a Business in Construction Industry Advantages of AAC block over other types Autoclaved Aerated Concrete Block (AAC) has been in use for over 70 years and is popular in many countries. These blocks can be used as a substitute for masonry construction where high levels of insulation are required such as storage buildings, animal sheds and foundations. AAC uses up to 35% less energy than other forms of construction due to its better insulation value, thermal mass capabilities and weight reduction when compared to traditional building methods such as brick or block. Business Plan: Start Manufacturing Business of AAC Blocks from Silica Sand & Lime Stone Powder In addition AAC is noncombustible therefore it doesn't have any worries if it ever caught on fire like timber or brick/block would have! It will remain intact without being effected at all unless exposed to extreme temperatures exceeding 1000 degrees Celsius. All these benefits make autoclaved aerated concrete block an ideal material for cold regions and wet environments. In fact there has never been another type of wall system that comes close to offering all these advantages combined into one product! Download PDF: How to Start Production Business of AAC Blocks from Silica Sand & Lime Stone Powder Manufacturing Process of AAC Blocks from Silica Sand & Lime Stone Powder There are two manufacturing processes in AAC blocks production; wet process and dry process. Wet process mainly takes place in ready-mix concrete plants. Construction aggregates (sand, crushed stone, gravel etc.) are used as base materials for a stable and strong raw mix which will later be processed into AAC blocks. Base materials can be recycled material such as concrete that is used in construction or demolished structures. Recycled materials have been proven to be environmentally friendly, cheaper than natural sand and durable. Read Similar Articles: Construction & Building Materials Projects The lime content of typical lime concrete is 10% -15%. After being mixed with water and other additives, it reaches its setting point at 20-40 min after mixing. The flowability at such early time is very poor, so it must be transported by mechanical transportation methods: conveyor belt and bucket elevator. The design of these devices should consider slope of inclined plane, flow rate of clinker and transportation speed. Storage silos with lift-slope device are also available, whose operation mechanism is similar to slipway hoist. Read our Books Here: Cement, Asbestos, Ceramics, Bricks, Limestone and Construction Materials Manufacturing Technology Market Demand AAC blocks are a form of construction material that can be utilised in a number of applications. It is used to construct apartments, terrace houses, hospitals, schools, and commercial constructions. Highways, bridges, and runways are just a few examples of what they can be used for. These blocks are in high demand, particularly in developing countries like India, where the population is quickly increasing and resources are in short supply to meet the country's construction needs. Related Feasibility Study Reports: Construction & Building Materials Projects As a result, they must use cost-effective and environmentally friendly building materials to prevent hurting the environment while satisfying these demands. Using local resources has a lesser environmental impact because these materials are plentiful, requiring less transit to collect them. This lowers the overall cost of using these materials for construction. As a result, natural lightweight aggregates like silica sand and limestone powder are critical in a range of industries, including civil engineering, by addressing concerns like global warming and raw material scarcity. Watch other Informative Videos: Construction & Building Materials Projects According to the needed final product qualities, autoclaved aerated concrete (AAC) blocks are created from the above-mentioned raw ingredients, as well as certain extra inert elements, to suit demand. The autoclaved aerated concrete (AAC) market is expected to grow at a CAGR of 7.2 percent from 2020 to 2027, reaching $26,964.5 million. Increased urbanisation and industrialization, infrastructure growth, expanding need for lightweight construction materials, growing preferences for low-cost housing, and an ever-increasing focus on green and soundproof structures are all driving the AAC sector forward. Key Players: • Ashoka Pre-Con Pvt. Ltd. • Baliapatam Tiles & Business Ventures Ltd. • Biltech Building Elements Ltd. • Gannon Dunkerley & Co. Ltd. • H I L Ltd. • J K Lakshmi Cement Ltd. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Decortication & Packing of Peanut Project Report

You've probably heard the term Decortication and Packing of Peanuts if you work in the food industry, especially if you deal with peanuts. Simply said, it entails removing the peanut's outer skin and packing it before shipping or selling it to clients. What does it mean to decorticate peanuts, though? What does it mean to "decorticate"? The skins of peanuts are removed before they are hulled. After that, they're roasted. The bacteria that live naturally on peanut shells are killed during roasting, preventing the oils from becoming rancid. Peanuts are shelled again after roasting to eliminate any leftover shell particles. This procedure also removes any small shell fragments that were missed during the decortication procedure (this can happen if a peanut gets slightly crushed during shelling). Finally, the decorated nuts are ground into a fine powder that can be used in goods such as peanut butter and protein powders. Groundnuts, often known as peanuts, are a high-value commodity that can be sold raw or processed into a variety of goods. The oil can be used to cook with, as a shortening, or as a foundation for confections. It can also be used to make peanut butter. Peanut or groundnut, Arachishypogaea, is a legume or "bean" species. The peanut was most likely domesticated and grown in Paraguay's lowlands. It's an annual herbaceous plant that reaches a height of 30 to 50 cm (1.0 to 1.6 feet). Each leaflet is between 1 and 7 centimetres in length and 1 to 3 centimetres in width. The leaves are opposite, pinnate, and pinnate with four leaflets (two opposing pairs; no terminal leaflet). Peanuts are also known as earthnuts, ground nuts, goober peas, monkey nuts, pygmy nuts, and pig nuts. Despite its name and look, the peanut is a legume, not a nut. The world's second-largest producer of groundnuts is India. There are three types of Indian groundnuts: Bold or Runner, Java or Spanish, and Red Natal. The most widely planted groundnut cultivars in India are Kadiri-2, Kadiri-3, BG-1, BG-2, Kuber, GAUG-1, GAUG-10, PG-1, T-28, T-64, Chandra, Chitra, Kaushal, Parkash, Amber, and others. The peanut processing process includes the procurement, storage, shelling, grading, and shipment of raw peanuts. The peanut shelling industry is dedicated to food safety and quality across the supply chain. The ability of regulatory agencies and industry to work together to improve food safety and quality using the latest research is critical to the peanut shelling sector's overall effectiveness in delivering safe, nutritious products to customers. Effective agricultural practises and the use of extension research affect the farmer's net profit. High oleic types pose a unique market difficulty; while most manufacturers see this as a way to extend shelf life and freshness, it puts the producer and sheller in a bind. This device is used to extract groundnut seeds from their pods. Groundnut decortication can be accomplished using a variety of tools, each with varying degrees of complexity. The following are the functions of a conventional groundnut decorticator: • Separate the seed from the seed-pod combination after cracking the groundnut and feed it in a controlled manner. Traditionally, peanuts have been stored in bags and handled by hand without being adequately cleaned or dried. The handling and storage of peanuts has been made easier thanks to technological advancements. The peanuts are now adequately processed and stored in godowns or silos before being transported by conveying machines. To move the goods, bucket elevators, belts, auger or screw conveyors, pneumatic conveyors, and other handling systems are available. Other downstream machines handle the final packing, which is determined by the customer's requirements. The package that reaches the market is the final version. It preserves and protects the natural occurrence of peanuts by using the appropriate packing material. The client required that the bag's storage capacity be 50 kg. Consumption has increased at a 2.53% yearly rate, with additional growth predicted between 2019 and 2024. The protein content of groundnut seeds is significant, and they contain edible oil (43-55 percent) (25-28 percent). China and India are the world's top peanut consumers and exporters, accounting for over 36% of global consumption. Many other nations provide considerable opportunities for exporters due to differences in client consumption patterns, as demand for plant-based protein over meat-based protein grows. Peanuts are projected to become an important source of unsaturated fats, fibre, protein, vitamins, and minerals as people grow more interested in healthy eating. Peanuts are the most widely used crop in the food industry, appearing in a wide variety of products. From 2021 to 2026, the peanut market is expected to grow at a CAGR of 4.5 percent. Peanut markets are ideal for producing a variety of peanut oils, dry roasted peanuts, and snacks for direct or indirect consumption. Groundnuts are a great source of proteins, lipids, energy, and minerals that are extensively grown as a staple crop in tropical and sub-tropical developing countries. Groundnuts are grown and consumed mostly in developing countries. Exports only account for around 6% of global output. Instead of being exported, the majority of edible groundnuts are grown for home consumption. Groundnut types best suited to specialised export market applications, such as the production of roasted, salted, or coated nuts, snacks, chocolate-based goods, or peanut butter, are not widely farmed. Key Players: • Jalaram Agriexports Ltd. • Mehek Overseas Ltd. • Moolchand Exports Ltd. • Olam Agro India Pvt. Ltd.
Plant capacity: Peanuts (50 Kgs each Bag): 400 Bags Per DayPlant & machinery: 30 Lakhs
Working capital: -T.C.I: Cost of Project: 534 Lakhs
Return: 30.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 15 of 23 | Total 229 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 22 23   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top