REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

•        Simplify procedures and expedite granting of mining leases.

•        Provide certain relief to make mining activities easier.

•        Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

•        Encourage joint venture projects with SMDC.

•        Clear mining lease applications and project report within 60 days.

•        Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

•        Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

 

 

 

Agro-Based Industries: Project Opportunities in Jharkhand

 

 

PROFILE:

 

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

 

 

 

GOVERNMENT POLICIES:

 

 The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

 

 

 

 Sericulture (Tasar Silk): Project Opportunities in Jharkhand

 

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

 

Steel Industry

 

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

 

 

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory  is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

 

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Rural Industries: Project Opportunities in Jharkhand

 

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

 

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1.       Providing ample employment opportunities through rural industries.

2.       Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3.       Giving priority to participation of women in development of rural industries.

4.       Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5.       Implementing cluster approach.

6.       Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7.       Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

 

 

Tourism: Project Opportunities in Jharkhand

 

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 294 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 294 336 337   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Manufacturing Business of Zinc Sulphate | Profitable Business Opportunity in Chemical sector

Zinc Sulphate is a combination of zinc and sulphur. It is used in farming as an organic fertilizer, and is also found in various medicines. The manufacturing process involves extracting zinc and sulphur from their ores and then mixing them together. In some cases, aluminum sulfate might be added too. This can help with the binding of chemicals and prevent them from flowing off after application. Zinc is often referred to as spelter or mineral white zinc, while sulfur’s natural form is called brimstone or flowers of sulfur. When combined, they are generally sold under several names including STS (Sulphated Trisodium Sulfate), STP (Sulphated Tetraborate), WSP (water soluble phosphate) or just zinc oxide. Visit this Page for More Information: Start a Business in Chemical Industry Projects Uses of Zinc Sulphate Zinc sulphate solution may be used in the production of zineb (zinc ethylene bisdithiocarbamate). Zineb, and agricultural fungicide, is commonly employed to protect crops such as apples, pears, cabbage, broccoli and ornamentals as well as citrus, stone-fruit, cotton and wheat. Zinc Sulphate is used in agriculture as a weed killer and to give protection against pests. It is used to supply zinc in animal feeds and fertilizers; Zinc Sulphate is also an important constituent of the precipitating bath in the manufacture of viscose rayon and in electrolyte for zinc plating. Zinc Sulphate functions as a mordant in dyeing; as a preservative for skins and leather; and as an astringent and emetic in medicine. Read Similar Articles: Chemical Industry How is zinc Sulphate produced? Producing zinc sulphate are roasting and leaching, flash chlorination, and thermal decomposition. Each method is suitable for a specific range of zinc ores with differing sulfur contents. Roasting and leaching can be used to process an ore with up to 0.5% sulfur while flash chlorination is effective on ores containing 0.25% or more sulfur by weight. Related Feasibility Study Reports: Chemicals,Chemicals Organic, Chemicals Inorganic, Zeolite, Sulphate, Wax, Activated Carbon, Polishing, Compounds, Acids, Starch, Nitrate, Phosphate, Formaldehyde, Biotechnology, Enzymes, Bio Fertilizer, Vermiculture and Vermi Compost Projects Thermal decomposition works best with ores that contain 20% sulfur or more and chlorine content of at least 70%. Flash chlorination produces more zinc oxide than other techniques but it also generates larger quantities of other compounds such as ammonium chloride (NHCl), calcium sulfate (CaSO4), sodium chloride (NaCl), potassium sulfate (K2SO4) and sodium carbonate ((Na2CO3). Thus, in many cases these impurities must be removed before commercial grade product is produced. Related Project: Zinc Sulphate - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue, Plant Economics Market Outlook: Global Zinc Sulfate Market is valued to grow at healthy CAGR of 4.2% over in period 2020-2026. Increasing usage as a fertilizer additive in agricultural industry to prevent and correct zinc deficiency in crops, rising demand of applications of raw material for manufacturing latex products and usage as an herbicide for moss control are the key factors driving the market. Zinc sulfate plays a prominent role in treating zinc deficiencies in humans and is used as a fertilizer for agricultural sprays to improve soil nutrient which is expected to play a crucial role in the market development. Read our Book Here: The Complete Technology Book on Chemical Industries The zinc sulphate market in India is expected to reach US$ 40.5 MN by 2026, registering a CAGR of 10.7% during 2020–2026. Increasing demand for fungicides and pesticides in agriculture applications, growing interest of farmers towards using zinc sulphate for crops like rice, wheat, maize and cotton are some of the factors driving growth of zinc sulphate market in India. Watch other Informative Videos: Chemicals (Organic, Inorganic, Industrial) Zinc has antifungal properties against several types of fungi causing different crop diseases such as Botrytis, Alter aria & Phytophthora Leaf Blight. Due to its anti-oxidant properties zinc acts as an effective rust inhibitor on boats, cars & equipment exposed to salt water or high humidity conditions. See More Links: Start a Business in Asia Related Market Research Reports Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Waste Oil Recycling Business Plan | Investment Opportunities in Waste Lubricating Oil Recycling Plant

Waste lubricating oil recycling plants are installed at garages and used-oil collection centers to recycle waste lubricating oils and turn them into usable products for companies that make up for their losses. These plants extract out reusable products from used or wasted lubricating oils. In many cases, these plants also purify oil to produce commercial grade lubricants that can be sold to manufacturers or wholesalers. The plant is best suited for large scale production of oil and other re-usable commodities. Read our Book Here: Lubricating Oils, Greases and Petroleum Products Manufacturing Handbook How does the waste lubricating oil recycling plant works? The waste lubricating oil recycling plant consists of various units such as a dryer, a centrifuge, and an environmental treatment device. During operation, waste lubricating oil would be input into a certain pre-designated area in factory where it would be dried out by a heat source until it’s completely vaporized from its liquid state. Afterwards, if needed for further processes, it will then be fed to a centrifuge where any solid contaminates are separated out from it before being recycled or disposed of accordingly. Depending on industrial oils, most customers opt for heavily refined versions due to their high quality performance when used during running machinery. Related Feasibility Study Reports: Petroleum and Petroleum Products, Refining, Greases, Lube Oil, Brake Fluid, Automotive & Industrial Lubricants, Gear Oils, Wax & Wax Products, Paraffin Wax, Polishes, Bitumen, Base Oil, Crude Oil, Fuel Oils, Lubricating Oils, Gear Oils, Kerosene This level of refining is done in a vacuum distillation process which often results in very large volumes of waste lube oil that contains no hazardous material whatsoever; these oily wastes can then be reprocessed using an advanced refining process known as hydro-treating. In many cases, only 15% new petroleum is required by these plants to maintain consistent overall energy use, resulting in about 85% reduction over traditional internal combustion engines. Then end product are called base oils Read our Books Here: Petroleum, Greases, Petrochemicals, Lubricants Benefits Reducing waste oil disposal costs, saving carbon dioxide emissions, reducing urban air pollution and water contamination. The market potential for waste lubricating oil recycling is large in that more than 80% of industrial lubricants are used in machinery manufacturing and therefore eventually become waste after use. All these factors make waste lubricating oil a huge resource and investment opportunity. Watch other Informative Videos: Petroleum and Petroleum Products Market Outlook: India industrial lubricant market is projected to grow to USD 1.91 billion by 2027, on the back of strong growth in construction & mining sectors across the country. Industrial lubricants find application in variety of end user industries therefore, an extensive list of lubricants is available that include hydraulic oil, greases, gear oil, compressor oil, industrial engine oil, metal working fluids and bearing oil. Among these, the hydraulic lubricants and machine lubricants dominate the market due to high demand in industrial and mining applications. Related Project: Investment Opportunities in Waste Lubricating Oil Recycling Plant The waste lubricating oil recycling plant market is highly lucrative, and is expected to grow at a healthy CAGR. The rise in awareness about environmental pollution due to improper disposal of used oil has compelled end-users of lubricants and machinery manufacturers to adopt proper procedures for used oil management. In addition, it has also increased demand for recycled products that are friendly to environment. Watch Video: Petroleum Lubricating Oil and Grease Manufacturing Industry | Lube Oil Blending Plant Market growth is highly dependent on factors such as rising disposable income, development of infrastructural facilities and diminishing crude oil prices. Waste lubricating oil recycling plant market is also driven by government regulations and incentives related to waste disposal and non-renewable energy generation. However, limited availability of space for installation may hamper industry’s growth over the forecast period. In addition, environmental concerns regarding wastage of lubricants in nature can restrict market share for recycled products. See More Links: Start a Business in Asia Related Market Research Reports Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects ???????????????????????????? ???????? NIIR PROJECT CONSULTANCY SERVICES, DELHI An ISO 9001:2015 Company ENTREPRENEUR INDIA 106-E, Kamla Nagar, Opp. Mall ST, New Delhi-110007, India. Email: [email protected] [email protected] Tel: +91-11-23843955, 23845654, 23845886 Mobile: +91-9097075054, 8800733955 Website: https://www.entrepreneurindia.co https://www.niir.org
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of IV Fluids (BFS Technology)

Intravenous fluids are fluids administered intravenously (via veins) or directly through the circulatory system to a patient. These fluids must be sterile to protect patients from harm, and there are several options. Many businesses sell pre-packaged intravenous fluids and other items that can be mixed with sterile water to make an intravenous solution. There are two types of intravenous fluids. Crystalloids, such as saline solutions, contain a solution of water-soluble molecules. Colloids are made up of particles that aren't soluble in water and have a high osmotic pressure, which causes fluid to flow into blood arteries. Intravenous fluids can also be used to provide medications in addition to delivering fluids. With the help of an infusion pump, a doctor can dissolve a little amount of medication in a bag of intravenous fluids and infuse the medicated fluid straight into the bloodstream over a long period of time. Fluids are also often utilised to aid in the recovery of individuals who have undergone surgery; people who receive fluids after surgery recover more quickly than those who do not. IV fluids are made up of a range of solutions. The one chosen is determined on the situation. As a simple mode of delivery, several additional chemicals can be added to the IV solution. Antibiotics, pain relievers, and other medications can be mixed into the IV to ensure that the patient receives the medication as soon as possible. Dextrose (also known as D-glucose, Corn Sugar, Starch Sugar, Blood Sugar, and Grape Sugar) is the most abundant sugar in nature. It can be found free (mono saccharine form) or chemically coupled with other sugars. In the Free State, it can be found in high concentrations in honey, fruits, and berries. • Electrolyte metabolism and waste water treatment, particularly in extreme situations. • Acid-base imbalance treatment. • During the postoperative phase, a dextrose solution is utilised to reduce salt extraction. • A dextrose solution with a concentration of 10-15% is used as a diuretic to promote urine flow. • Saline solution is used when a significant amount of salt has been lost due to vomiting, stomach or intestinal duodenal aspiration, or an alimentary fistula. In medicine, intravenous (IV) fluids are used to restore vital nutrients or chemicals that the body cannot produce on its own. IV fluids are also widely utilised in medical conditions where someone has lost a considerable amount of fluid from their body and requires rapid rehydration as well as electrolyte and vitamin replacement, such as accidents or illnesses. If IV fluids are needed to treat a sickness or disease, doctors will examine the patient's condition on a regular basis to ensure that it does not deteriorate and that his or her health recovers quickly and successfully. The global intravenous (IV) solutions market was valued at USD 6.9 billion in 2015, and it is predicted to grow at a 7.8% CAGR over the next five years. The constantly growing geriatric population, as well as the high prevalence of malnutrition among the elderly and children, might be attributed to the growth of this industry. The intravenous (IV) solution market is expected to develop at a compound annual growth rate (CAGR) of 7.69 percent from 2016 to 2022, reaching USD 11,511.2 million. The market is expanding due to the rising prevalence of chronic diseases and the increasing acceptability of vitamin C intravenous treatment therapy for colorectal cancer. Key Players: • Abaris Healthcare Pvt. Ltd. • Ahlcon Parenterals (India) Ltd. • Axa Parenterals Ltd. • Infutec Healthcare Ltd. • Kokad Pharmaceutical Laboratories Ltd. • Parenteral Surgicals Ltd.
Plant capacity: IV Fluids (500 ml Size Pack): 78,000 Packs Per DayPlant & machinery: 576 Lakhs
Working capital: N/AT.C.I: Cost of Project: 1190 Lakhs
Return: 27.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Set up your own Maize Processing Plant with Cogeneration Plant

After wheat and rice, maize is the third most significant cereal/crop, and it offers a wide range of processing options due to its high nutritional content and cost-effectiveness. Maize (sometimes known as corn) is a cereal grass commonly used for food and animal feed. In India, maize is one of the most extensively consumed foods. India produces 21 million tonnes of maize every year, with Karnataka, Andhra Pradesh, and Rajasthan producing the most. India is one of the world's largest maize producers, and the grain can be grown throughout the year in practically any agro-climatic zone within its borders. Maize planting has increased in India in recent years, resulting in its domination as a starch source among processors. Maize is one of the most adaptable crops in development, thriving in a variety of agro-climatic situations. Maize is recognised as the "Queen of Cereals" around the world because it has the highest genetic production potential of all cereals. Starch, oil, protein, alcoholic drinks, food sweeteners, medicines, cosmetics, film, textile, gum, packaging, and paper are just a few of the sectors that use maize as a primary raw material. In commercial food production, a maize processing factory, often known as a corn mill, plays a significant role. Dry maize is ground into corn meal or corn flour at the factory, which is subsequently used to make tortillas, breads, and cereals. The grain can also be fermented and distilled to make ethanol fuel, or it can be processed into syrups to sweeten carbonated beverages. Depending on the type of gear used and the degree of milling that occurs during processing, a maize processing facility can do more than just turn corn into corn flour, cornmeal, or grits. Despite the fact that these are all common applications for maize processing facilities. Almost 57 percent of maize produced in India is utilised to feed poultry and livestock. Thirty-three percent is consumed, 9% is utilised to manufacture starch and related products, and 1% is used as seed. Maize is mostly used to make starch and other industrial products in the United States and Europe. Despite being one of the world's major maize producers, India's value addition in the form of processing lags behind more industrialised countries. A considerable amount of starch is transformed into high-value-added nutritional sweeteners, such as glucose syrup, dextrose, and fructose syrup, in modern countries. The Indian corn starch market is expected to increase at a CAGR of 3.9 percent from 2019 to 2024, reaching $1.37 billion in 2018. Corn's wide range of uses in industries including as food and beverage, medicines, animal feed, textiles, and paper are moving the India Corn Starch market ahead. Textile, paper, and construction sectors, as well as the pharmaceutical industry, are the primary consumers of starches. Although the usage of these derivatives in the food business is slowly increasing, there is still a lot of untapped potential in the maize starch processing industry. North America is the most important market for corn starch in terms of both value and volume. In contrast, the maize starch market in Asia Pacific is expected to develop at the fastest rate in the coming year, at a CAGR of 6.4 percent. Maize starch demand is rising across Asia Pacific, particularly in ASEAN, China, and India, where major corn starch producers have recently made significant investments. Key Players: • Aksharchem (India) Ltd. • Amaravati Agro Ltd. • Cargill India Pvt. Ltd. • Devi Corn Products Ltd. • Gayatri Bioorganics Ltd. • Gujarat Ambuja Exports Ltd.
Plant capacity: Maize Starch: 150 MT Per Day | Liquid Glucose: 20 MT Per Day | Maltodextrin: 18 MT Per Day | Gluten as by Product: 33 MT Per Day | Germ as by Product: 21 MT Per Day | Fiber as by Product: 36 MT Per DayPlant & machinery: 136 Cr
Working capital: N/AT.C.I: Cost of Project: 171 Cr
Return: 21.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

Active Pharma Ingredients Metformin and Ciprofloxacin Production Business

Metformin (also known as Glucophage) is an oral diabetes medication that helps the body use insulin more effectively and lower blood sugar levels. Metformin is a diabetes treatment that can be taken alone or with other diabetes drugs. It has no side effects like hypoglycemia or weight gain, which are common with other diabetic treatments. Metformin does not cure diabetes, but it can help you manage your blood sugar and lower your risk of problems if you take it as prescribed by your doctor. Metformin is the first-line treatment for type 2 diabetes, especially in overweight individuals, and is sold under the brand names Glucophage and others. Polycystic ovarian syndrome (PCOS) is also treated with it (PCOS). It's taken orally and hasn't been linked to weight gain. It's sometimes used off-label to aid people who take antipsychotics or phenelzine avoid gaining weight. Metformin is a biguanide, which is a type of antihyperglycemic medication. It works by lowering glucose production in the liver, improving insulin sensitivity in body tissues, and increasing GDF15 secretion to reduce hunger and calorie intake. Metformin is a drug that is used to treat high blood sugar levels caused by type 2 diabetes, sometimes known as sugar diabetes. In this type of diabetes, the pancreas' insulin is unable to carry sugar into the body's cells, where it can operate normally. Metformin can help lower blood sugar and restore the way you use food to make energy when it's too high, either alone or in combination with a type of oral antidiabetic medicine called a sulfonylurea, or insulin. Metformin is a drug that aids in the regulation of blood sugar levels in persons with type 2 diabetes. It's also used as a second-line treatment for infertility caused by polycystic ovarian syndrome. Infections of the urinary tract (not recommended as a first-line antibiotic) Ciprofloxacin is the active ingredient in Ciprofloxacin, an antibiotic. It prevents germs from copying their DNA, which is how it works. It's primarily used to treat infections of the urinary tract, respiratory tract, prostate gland, skin and soft tissue infections, and anthrax because of its broad spectrum of activity against Gram-positive and Gram-negative bacteria, as well as its ability to penetrate bacterial biofilms and stationary phase cells in both aerobic and anaerobic environments. In 1983, Bayer A.G. developed ciprofloxacin, which was approved by the US Food and Drug Administration (FDA) in 1987. The FDA has licenced ciprofloxacin for 12 human and veterinary uses, however it is routinely used for unapproved reasons (off-label). Antibiotics, herbal and natural supplements, and thyroid therapies are among the medications that interact with ciprofloxacin. • Acute uncomplicated cystitis in women • Chronic bacterial prostatitis in men (not recommended as a first-line antibiotic choice) • Respiratory tract infections are less common (not recommended as a first-line antibiotic choice) • Acute sinusitis (not recommended as a first-line antibiotic choice) • Infections of the skin and the tissues that support it • Infections of the bones and joints • Infectious diarrhoea • Salmonella typhi-caused typhoid fever (enteric fever) Metformin hydrochloride API producers are strengthening their manufacturing capacities to lessen their reliance on China as anti-China sentiment grows in India. Due to interruptions in supplies from China as a result of the COVID-19 pandemic, manufacturers have been ramping up domestic production of active medicinal components (APIs). Despite the fact that India is known as the world's pharmacy because to its vast production capabilities in generic pharmaceuticals and vaccines, China is proving to be a tough rival, accounting for half of worldwide API supply. Indian drug companies are seeking to domestic producers to minimise their reliance on China in the metformin hydrochloride API business, as ties between the two countries have improved since a deadly border clash in June 2020. The Indian ciprofloxacin market is likely to grow rapidly over the forecast period. The ciprofloxacin market in India is being driven by the increased prevalence of renal disorders and eye infections, among other things. Ciprofloxacin is a second-generation fluoroquinolone that is used to treat a range of ear infections, including otitis externa, which is expected to drive market growth through FY2026. In addition, the market is expected to grow in the next years as the demand for broad-spectrum antibiotics that can treat a wide range of gram-positive and gram-negative bacteria grows. Key Players: • Aarti Drugs Ltd. • Abhilasha Pharma Pvt. Ltd. • Auro Laboratories Ltd. • Corvine Chemicals & Pharmaceuticals Ltd. • Godavari Drugs Ltd. • Harman Finochem Ltd.
Plant capacity: Metformin: 2,000 Kgs. Per Day | Ciprofloxacin: 1,000 Kgs. Per DayPlant & machinery: 104 Lakhs
Working capital: N/AT.C.I: Cost of Project: 584 Lakhs
Return: 31.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of Plastic Optical Lenses

Traditional glass lenses can be replaced by plastic optical lenses. They're constructed of an inert, pliable polymer that allows you to design frames that don't distort your eyesight or disrupt your eye socket's natural shape. Because they're so light, you won't even notice you're wearing them! Optical lenses are light-focusing or diverging optical components that focus or diverge light. Optical lenses are used in a variety of fields, such as life sciences, photography, industry, and defence. The profile or substrate of a lens affects how light flows through it. A lens is a refractory transmissive optical device that alters the focal length of a light beam. A simple lens is made up of a single piece of material, whereas a compound lens is made up of numerous simple lenses (elements) connected by a common axis. Lenses are made of transparent materials that have been ground and polished into the right shape, such as glass. The great majority of lenses are spherical, with two sphere sections on each surface. Convex (bulging outwards from the lens), concave (depressed into the lens), or planar (no bulging outwardly from the lens) surfaces are possible (flat). The lens axis is the line that connects the centres of the spheres that make up the lens surfaces. A magnifying glass is a frame that contains a single convex lens and a handle or stand. Myopia, hyperopia, presbyopia, and astigmatism, among other vision abnormalities, can be treated using lenses. Monoculars, binoculars, telescopes, microscopes, cameras, and projectors are some of the additional applications. When used on the human eye, some of these instruments provide a simulated image; others create a real image that may be captured on photographic film or an optical sensor, or displayed on a screen. The Abbe number refers to a lens's dispersion, which is the property most closely linked to its optical performance of all its properties. Lower Abbe numbers imply chromatic aberration (colour fringes above/below or to the left/right of a high contrast object), which is more common in larger diameter lenses with stronger prescriptions (4D or greater). Lower Abbe numbers are an inherent characteristic of mid and higher index lenses, regardless of the material employed. The Abbe number for a material at a specific refractive index formulation is called the Abbe value. So far, glass lenses have been employed in a wide range of applications. As a result of its brittleness and susceptibility to deterioration, plastic lenses have developed and grown in popularity. Plastic lenses beat glass lenses in terms of UV resistance, durability, and safety for use in sports or other high-intensity activities where the lens is likely to break. Plastic lenses can be coated with a variety of coatings to meet the needs of users. Optical lenses are optical components that concentrate or diverge light. Microscopes, binoculars, camera lenses, and telescopes are examples of optical lenses. Optical lenses are made of many materials, such as glass, polycarbonate, and plastic resins. Because of their multiple advantages and the increasing growth of optics-related industries, resin-based lenses are currently in the limelight. The Internet's widespread use has accelerated the adoption of mobile phones and televisions. As a result, an increasing number of people are experiencing vision issues and needing to utilise plastic lenses. These lenses feature a wide range of practical qualities, such as little distortion, shatter resistance, and strong breaking resistance, which has increased their popularity and demand significantly. Key Players • Appasamy Ocular Devices Pvt. Ltd. • Bausch & Lomb India Pvt. Ltd. • Eagle Optics Pvt. Ltd. • Essilor India Pvt. Ltd. • G K B Hi-Tech Lenses Pvt. Ltd.
Plant capacity: 20,000 Pairs per dayPlant & machinery: 10.27 Cr
Working capital: N/AT.C.I: Cost of Project: 14.73 Cr
Return: 25.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of Plastic Optical Lenses

Traditional glass lenses can be replaced by plastic optical lenses. They're constructed of an inert, pliable polymer that allows you to design frames that don't distort your eyesight or disrupt your eye socket's natural shape. Because they're so light, you won't even notice you're wearing them! Optical lenses are light-focusing or diverging optical components that focus or diverge light. Optical lenses are used in a variety of fields, such as life sciences, photography, industry, and defence. The profile or substrate of a lens affects how light flows through it. A lens is a refractory transmissive optical device that alters the focal length of a light beam. A simple lens is made up of a single piece of material, whereas a compound lens is made up of numerous simple lenses (elements) connected by a common axis. Lenses are made of transparent materials that have been ground and polished into the right shape, such as glass. The great majority of lenses are spherical, with two sphere sections on each surface. Convex (bulging outwards from the lens), concave (depressed into the lens), or planar (no bulging outwardly from the lens) surfaces are possible (flat). The lens axis is the line that connects the centres of the spheres that make up the lens surfaces. A magnifying glass is a frame that contains a single convex lens and a handle or stand. Myopia, hyperopia, presbyopia, and astigmatism, among other vision abnormalities, can be treated using lenses. Monoculars, binoculars, telescopes, microscopes, cameras, and projectors are some of the additional applications. When used on the human eye, some of these instruments provide a simulated image; others create a real image that may be captured on photographic film or an optical sensor, or displayed on a screen. The Abbe number refers to a lens's dispersion, which is the property most closely linked to its optical performance of all its properties. Lower Abbe numbers imply chromatic aberration (colour fringes above/below or to the left/right of a high contrast object), which is more common in larger diameter lenses with stronger prescriptions (4D or greater). Lower Abbe numbers are an inherent characteristic of mid and higher index lenses, regardless of the material employed. The Abbe number for a material at a specific refractive index formulation is called the Abbe value. So far, glass lenses have been employed in a wide range of applications. As a result of its brittleness and susceptibility to deterioration, plastic lenses have developed and grown in popularity. Plastic lenses beat glass lenses in terms of UV resistance, durability, and safety for use in sports or other high-intensity activities where the lens is likely to break. Plastic lenses can be coated with a variety of coatings to meet the needs of users. Optical lenses are optical components that concentrate or diverge light. Microscopes, binoculars, camera lenses, and telescopes are examples of optical lenses. Optical lenses are made of many materials, such as glass, polycarbonate, and plastic resins. Because of their multiple advantages and the increasing growth of optics-related industries, resin-based lenses are currently in the limelight. The Internet's widespread use has accelerated the adoption of mobile phones and televisions. As a result, an increasing number of people are experiencing vision issues and needing to utilise plastic lenses. These lenses feature a wide range of practical qualities, such as little distortion, shatter resistance, and strong breaking resistance, which has increased their popularity and demand significantly. Key Players • Appasamy Ocular Devices Pvt. Ltd. • Bausch & Lomb India Pvt. Ltd. • Eagle Optics Pvt. Ltd. • Essilor India Pvt. Ltd. • G K B Hi-Tech Lenses Pvt. Ltd.
Plant capacity: 20,000 Pairs per dayPlant & machinery: 10.27 Cr
Working capital: N/AT.C.I: Cost of Project: 14.73 Cr
Return: 25.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Recycling of Lithium Ion Battery Business

The popularity of smart phones and tablets has resulted in a significant increase in the demand for lithium ion batteries in recent years. Because these gadgets contain hazardous elements that must be properly disposed of to avoid contamination of the environment, it is now more important than ever to recycle these batteries. Most commercial lithium ion batteries contain transition metal oxides or phosphates, aluminium, copper, graphite, organic electrolytes containing poisonous lithium salts, and other chemicals. As a result, an increasing number of scientists are concentrating their efforts on the recycling and repurposing of spent lithium ion batteries. However, recycling expended lithium ion batteries is difficult due to their high energy density, greater safety, and low cost. Lithium-ion batteries are becoming increasingly popular. Cell phones, computers, consumer gadgets, and certain industrial applications already use them. They're used in telecom towers, solar storage systems, and electric automobiles. Lithium-ion batteries should be recycled for a variety of reasons, according to battery experts and environmentalists. The recovered materials might be utilised to build new batteries, cutting production costs. These components now account for more than half of the cost of a battery. The most expensive components of the cathode, cobalt and nickel, have seen significant price changes in recent years. The removal of any plastic, rubber, or metal pieces is the first stage in recycling a lithium ion battery. These parts are sold as raw materials after being separated from the remainder of the waste stream. The next stage is to separate all metals, which is usually done by electrolysis, which produces an acid solution that dissolves metals while leaving the bulk of other components behind. Batteries can be dismantled into groups of similar materials and reused without any additional processing. Cobalt and nickel, for example, could be employed in new batteries or as semiconductor components. Steel is created from manganese and iron, and aluminium is delivered to aluminium smelters. Despite the fact that chromium is infrequently recovered for use in steel manufacturing, it is most commonly used as a high-purity alloying agent. Lithium waste does not react with other chemicals, thus it can be disposed of properly in landfills or resold to manufacturers who will reuse it after separation. India's lithium-ion battery sector is expected to grow quickly over the next five years. One of the primary steps taken by the Indian government to drive the growth of this sector is the National Electric Mobility Mission Plan 2020, which forecasts 6-7 million electric vehicles on Indian roads by 2020 and a target of 175 GW renewable energy installation by 2022. India's annual lithium-ion battery market is expected to increase at a 37.5 percent compound annual growth rate (CAGR) from now until 2030, when it would reach 132 GWh, according to projections. By 2030, the market for lithium-ion batteries will have grown from 2.9 gigawatt-hours in 2018 to around 800 gigawatt-hours. India's goal to transition from fossil fuel-based vehicles to electric vehicles (EVs) would drive up demand for batteries in the coming years. The lithium-ion battery (LiB) is now the most suitable alternative among the various existing battery technologies. With today's recycling technology, valuable metals including cobalt, nickel, manganese, lithium, graphite, and aluminium can be recovered up to 90%. These make up around 50-60% of the total battery cost, with cobalt being the most expensive.
Plant capacity: Copper: 1.4 MT Per Day | Aluminium: 0.8 MT Per Day | Graphite: 1.8 MT Per Day | Carbon Black: 0.3 MT Per Day | Lithium Cobalt Oxide: 2.5 MT Per Day | Plastic: 0.2 MT Per DayPlant & machinery: 200 Lakhs
Working capital: N/AT.C.I: Cost of Project: 422 Lakhs
Return: 27.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Start Bamboo Fiber & Yarn Manufacturing Business

Bamboo is a member of the Gramineae family, which includes over 90 genera and 1200 species. Bamboo is indigenous to the tropical and subtropical regions between 46° north and 47° south latitude in Africa, Asia, Central America, and South America. Several species from Europe and North America may also be able to thrive in moderately temperate climates. Bamboo is a plant that can grow in a variety of climates and soil types. Bamboo is a type of agroforestry crop that can be grown on terrain that isn't ideal for farming or forestry. Because the culms are hollow, they are light and may be collected and moved without the necessity of special equipment or trucks, unlike wood. It quickly separates for weaving, making it easy to handle for men and women alike. Bamboo is commonly planted on farms outside of the forest, where it is easier to handle. Processing typically does not necessitate highly specialised labour or unique expertise, and it can be started at a low cost by rural poor people. Bamboo's popularity and trade have grown in recent years. Bathrobes • Towels • Bedclothes • T-shirts • Socks • Sweaters • Summer Clothing • Mats • Curtains are all made of bamboo fibre yarn. Certain varieties can reach a height of one metre every day. Bamboo grass can be as small as one foot (30 cm) tall or as large as 100 feet tall bamboo wood plants (30 meters). Bamboo plants grow on every continent and are economically and culturally significant. Bamboo fibre and yarn are created from bamboo plants, which are grasses that thrive in tropical climates around the world. Bamboo fibre and yarn are gaining popularity because of their environmental friendliness, durability, softness, and washability, as well as their antibacterial characteristics. Bamboo fibre and yarn, on the other hand, must be processed extensively before being utilised. Bamboo fibre and yarn are created from bamboo plants, which are grasses that thrive in tropical climates around the world. Bamboo fibre and yarn are gaining popularity because of their environmental friendliness, durability, softness, and washability, as well as their antibacterial characteristics. Bamboo fibre is made from the stalks of bamboo plants, which can be found in tropical and subtropical areas all over the world. Textiles made from these stalks have been woven in Asia for thousands of years, dating back to the Han Dynasty (200 BC-AD 200), but the rest of the world has only recently discovered their beauty. Bamboo fibre is used in a variety of applications, including bathroom textiles, medicinal and hygienic clothes, bamboo fashion, and home furnishings. They are antifungal and antibacterial, have a flat surface, and are as thin as hairs. Despite growing concerns regarding its manufacturing volume, bamboo fibre demand is increasing as a result of a growing focus on environmentally friendly textile production. Increasing public awareness about environmental sustainability and conservation, as well as rising demand for natural fabrics, are expected to boost market demand throughout the forecast period. In the medium term, the usage of breakthrough eco-fiber production technologies such as enzyme technology, foam technology, and plasma technology is likely to bring up new prospects. The global Bamboo Fibers market was worth million US dollars in 2018 and is predicted to grow at a CAGR of between 2019 and 2025 to reach million US dollars by the end of 2025. Key Players • Amarjothi Spinning Mills Ltd. • Cheran Spinner Pvt. Ltd. • Gillanders Arbuthnot & Co. Ltd. • H P Cotton Textile Mills Ltd. • Lakshmi Mills Co. Ltd. • Wearit Global Ltd.
Plant capacity: 6,666 Kgs Per Day Plant & machinery: 273 Lakhs
Working capital: N/AT.C.I: Cost of Project: 725 Lakhs
Return: 26.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Start Printed Circuit Board (PCBs) Production Business

PCBs are used extensively in modern electronic products such as computers, telephones, televisions, and even smaller electronic devices such as smart watches and fitness trackers. Printed wiring boards (PWBs) are critical components that include a foundation board that supports all other parts and circuitry, as well as a patterned layer of electrical tracks printed on top. The four major components of a printed circuit board (PCB) are: • Substrate (optional): The substrate, which is usually constructed of fibreglass, is the first and most crucial phase. Fiberglass is employed in the PCB's core because it strengthens it and helps it withstand fracture. Consider the substrate to be the "skeleton" of the PCB. • Copper Layer: This layer can be copper foil or a full-on copper covering, depending on the board type. Regardless of which method is utilised, the copper's function is the same: it transmits electrical signals from the PCB to the brain and muscles, just like your nervous system. • Solder Mask: The solder mask, a polymer layer that protects the copper from short-circuiting when it comes into contact with the environment, is the third component of the PCB. The solder mask serves as the PCB's "skin" in this situation. • Silkscreen: The silkscreen is the final component on the circuit board. Part numbers, logos, symbols, switch settings, component reference, and test locations are commonly silkscreened on the component side of the board. The silkscreen is also referred to as Television sets, transistor sets, radios, amplifiers, ampligrams, stereo amplifiers, voltage stabilisers, calculators, communications equipment, power supply, public address equipment, computers, and defence and other research organisations all employ printed circuit boards. On today's PCBs, component connection leads are commonly in the shape of a little foot. As a result, they can be immediately soldered to the copper tracks and placed on the same side. This not only saves money by avoiding costly drilling and track hookups through the board, but it also allows for the use of surface mounting devices (SMDS), which are often smaller and potentially less expensive than their traditional counterparts and allow for significantly higher component packing density. Capacitors and resistors are the most common components found in SMD form. These are little rectangular blocks with metal caps on the ends that connect all of the interior electrodes. There are no cables connecting the components. PCBs can be found in practically every electronic product, from consumer electronics like PCs, tablets, cellphones, and gaming consoles to industrial and even high-tech items in the strategic and medical electronics industries. Given the importance of the PCB business in the electronics manufacturing ecosystem, an article titled 'How will the Indian PCB industry grow?' was published in the April 2016 issue of Electronics Bazaar, and included the perspectives of key industry stakeholders. The Indian market is unique in compared to the rest of the world. Because flexible circuits may reduce form factor and eliminate connectors, they are predicted to grow far faster in the worldwide market than rigid PCBs. Most Indian PCB producers, on the other hand, concentrate on single-sided, double-sided, and multi-layered PCBs with four to eight layers. The Indian electronics industry is one of the world's fastest expanding, with domestic manufacturing exceeding $100 billion and expected to reach $400 billion by 2022. As a result, the PCB industry will see significant growth. According to an ELCINA analysis, PCB consumption in the residential market is predicted to expand at a CAGR of 20.56 percent from 2015 to 2020, reaching over US$ 6 billion by 2020, up from US$ 2.38 billion currently. Key Players: • Akasaka Electronics Ltd. (2002) • Akasaka Electronics Ltd. • Amara Raja Electronics Ltd. • Ample Circuit Pvt. Ltd. • At & S India Pvt. Ltd. • B I T Mapper Integration Technologies Pvt. Ltd. • B L G Electronics Ltd.
Plant capacity: Multilayer High Density Interconnect PCBs: 40 SqMtrs. Per Day Multilayer Flex PCBs: 40 SqMtrs. Per Day | Multilayer High Power PCBs: 40 SqMtrs. Per DayPlant & machinery: 260 Lakhs
Working capital: N/AT.C.I: Cost of Project: 594 Lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 294 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 294 336 337   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top