Google Search

Search

Already a Member ?

Best Business Opportunities in Chad, Africa- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 2 of 61 | Total 610 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 60 61   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Detergent Cake & Washing Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Detergent are complete washing or cleaning products. The synthetic detergent industry is one of the largest chemical process industries. Some important uses of detergent cake and powder are in hand soaps and shampoo; special protective creams, like cold creams, varnishing creams; cosmetics; cleaning of glass, metal painted surfaces; washing and treatment of food; household washing; removal of gelatine films; making antiseptic soaps etc. Detergent are doing an infinitely superior job of cleaning. Present demand for detergent is 29,25,000 tonnes while that of soap is 12,55,000 tonnes. This industry has vast resources for earning profit and is a good investment policy for entrepreneurs.
Plant capacity: 600 Kgs/ DayPlant & machinery: Rs. 3 Lakhs
Working capital: Rs. 12 LakhsT.C.I: Rs. 28 Lakhs
Return: 35.06%Break even: 55.03%
Add to Inquiry Add to Inquiry Basket

Wooden Furniture - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

The furniture making is an ancient art in India before centuries. The expertise of India in manufacturing furniture was accepted by all the parts of the world. Wooden furniture is made in cottage and house holds industries. It is also made in small to large scale sectors. However, it is labour intensive industry and therefore has developed more in small and cottage sector than organized sector. The industry at present is concentrated much in the states of Tamil Nadu, Madhya Pradesh, Kerala, Maharashtra, West Bengal, Andhra Pradesh, U.P. and Gujarat. Wooden furniture provides very good domestic as well as export market scope subject to various designs it can be innovated and the price stability can maintain.??
Plant capacity: 20 Pcs/DayPlant & machinery: Rs. 4 Lakhs
Working capital: Rs. 5 LakhsT.C.I: Rs. 13 Lakhs
Return: 111.00%Break even: 26.99%
Add to Inquiry Add to Inquiry Basket

Wooden Furniture (With Mediocre Automation) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

The term wooden furniture is used for articles of daily use in dwelling house, place of business, public buildings, and includes items such as chairs, tables, beds, safes, sofa sets, almirahs, cabinates etc. are made of wood. The furniture making is an ancient art in India before centuries, the expertise of India in manufacturing furniture was accepted by all the parts of the world. This type of industries are mostly free from pollution. Market demand of wooden articles are gradually increases, but there is short supply because of non-availability of proper woods, Wooden furniture is always enjoy a ready market and selling quality furniture with elegant get up trends an easy access to the consumer market. There is bright scope of export of wooden furniture. Any new entrepreneur may enter in this industry.
Plant capacity: 20 Articles/DayPlant & machinery: Rs. 13 Lacs
Working capital: Rs. 28.0 LacsT.C.I: Rs. 73 Lacs
Return: 42.81%Break even: 48.28%
Add to Inquiry Add to Inquiry Basket

Granite Tiles, Slab and Monuments - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Granite Slab and Tiles are mainly used for wall paneling and facades. Today in Europe and in Western Countries and in India, architect and builders are switching over to the use of natural stones in construction. As a result, the latest trend in building construction is use to granite slab and tiles extensively in toilet, bathroom, kitchen and wall paneling. Due to his polished look easy handling and economics princes, granite tiles are fast replacing glazed tiles for toilet and bathroom and granite slab in wall paneling So we focus as the development of building as well as industrial or residential. (The granite slab and tiles of different sizes having dimension for slab 30cm X 30cm, 40cm X 40cm, 60cm X 40cm, 80cm X 40cm, 90cm X 40cm, and for tiles dimension is 15cm X 10cm, 30cm X 10cm, and the thickness for slab range of 18mm to 20mm for tiles thickness is 7/8mm. Granite are solidified acid magmas consisting of ortho glass quartz and mica and are available in different heat, multi coloured etc.)
Plant capacity: 1000.00 Tiles/Day & 100 Monument/Day, 5 Slab/DayPlant & machinery: Rs. 182 Lakhs
Working capital: -T.C.I: Rs. 488 Lakhs
Return: 44.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Granite Tiles, Slab and Monuments - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Granite Slab and Tiles are mainly used for wall paneling and facades. Today in Europe and in Western Countries and in India, architect and builders are switching over to the use of natural stones in construction. As a result, the latest trend in building construction is use to granite slab and tiles extensively in toilet, bathroom, kitchen and wall paneling. Due to his polished look easy handling and economics princes, granite tiles are fast replacing glazed tiles for toilet and bathroom and granite slab in wall paneling So we focus as the development of building as well as industrial or residential. (The granite slab and tiles of different sizes having dimension for slab 30cm X 30cm, 40cm X 40cm, 60cm X 40cm, 80cm X 40cm, 90cm X 40cm, and for tiles dimension is 15cm X 10cm, 30cm X 10cm, and the thickness for slab range of 18mm to 20mm for tiles thickness is 7/8mm. Granite are solidified acid magmas consisting of ortho glass quartz and mica and are available in different heat, multi coloured etc.)
Plant capacity: 1000.00 Tiles/Day & 100 Monument/Day, 5 Slab/DayPlant & machinery: Rs. 182 Lakhs
Working capital: -T.C.I: Rs. 488 Lakhs
Return: 44.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Oxygen and Nitrogen Gas Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Oxygen (CO2, gas at 00/1 matm., 1.429g./l, crit. Pressure, 49.7 Matm.) is a colorless, odourless, and tasteless gas, somewhat heavier than air. It is one of the most active elements and plays on essential part in the respiration of living cells and in combustion. Oxygen is required for cutting and welding of steel materials for manufacturing and repairs is various industries. Ship repairing, fabrication works etc. require large amounts of oxygen. It is also required for medication purpose and deep sea driving. Nitrogen gas used in the production of ammonia which in turn is used for the manufacture of urea and ammonium phosphate, which are fertilizers of great use. It is used for blanketing hazardous chemicals which will an inert atmosphere. Liquid Nitrogen is also used to maintain low temperatures during the transportation of frozen food. Oxygen and Nitrogen are the most important industrial gases. At present there are 190 units in the country. As the quantity of oxygen required in integrated steel plants is huge. The excess oxygen is compressed and bottled in steel cylinders and supplied to engineering industries. There is a very good market for new entrepreneur.
Plant capacity: 1440 Cubie Meter/DayPlant & machinery: 50 Lacs
Working capital: 18 LacsT.C.I: 101 Lacs
Return: 18.19%Break even: 75.00%
Add to Inquiry Add to Inquiry Basket

Tyre Retreading And Repairing Facility For Heavy Vehicles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

Automobile tyres are quite costly in India, and are manufactured only by big manufacturers. Retreading is replacement of worn, cut or loose treads by saw gums or retread band. The old useless tyre can be made to run for an almost equal mileage as a new tyre by retreading within the cost not exceeding one-third of that of a new tyre. The life of the retreaded tyre is about 80% of that of a new tyre. The retreaded and reclaimed tyres are quite satisfactory survives on roads and rough land a like. Retreading & reclaiming applies to all the worn out tyres may it be Truck, Bus, Car, Tractor, Trawler or these of Airoplanes Commercial Vehicles, along with the railways, constitute lifelines of the economy. These means of transportation deliver the goods needed by the populace besides supplying inputs to industry and other economic activates. Good demand for retreading is in India and it will increase day by day. So new entrepreneur enter in this business will be successful.
Plant capacity: 100 Tyres Retreads/Day & 2Nos. Heavy Vehicles Repairing/DayPlant & machinery: 25 Lacs
Working capital: 18 LacsT.C.I: 71 Lacs
Return: 89.00%Break even: 28.00%
Add to Inquiry Add to Inquiry Basket

Aluminium From Bauxite of Gibbsite Variety - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Residual rocks, in which the alumina trihydrate and monohydrate minerals gibbsite, boehmite, and diaspore predominate are classified as bauxite. Other residual minerals are developed in the unique type of rock weathering which produces bauxites, and these minerals kaolinite, halloysite, goethite, hematite, magnetites, anatase, quartz and some phosphatic and manganiferous minerals may form the lesser constituents of bauxites. Since bauxites have formed from a variety of rock types, minor quantities of residual minerals resistant to weathering. Traces of the elements barium, boron, carbon, bismuth, beryllium calcium, cerium, chromium, cobalt, copper, hafnium, gallium gold, yttrium, zinc, zirconium have been found in bauxites. Some of these elements are presumably present as secondary minerals, while other are present in unaltered mineral remnants. Halloysite is rare in older bauxites, but it is a common constituent of younger bauxites and with quartz is usually the main constituent of the residual clays underlying younger bauxites. The alumina hydrates and hydrous Aluminium silicates of bauxites are derived chiefly from the weathering of felspathoids and felspars of igneous, volcanic, and metamorphic rocks, form Aluminium silicates, felspars, micas and clay minerals of sedimentary and metamoriphic rocks, and from the less soluble minerals in particularly pure calcareous limestone. Some alumina hydrates and hydrous Aluminium silicates are produced also from the breakdown of amphiboles and pyroxenes in igneous, volcanic, and metamorphic rocks. Although certain almost pure calcareous rocks from bauxite, no bauxite has been found which is known to be derived from coarde high silica or ultra basic rocks. The colour of bauxites, which varies from white, cream, yellow, green, gray, pink, brown, red to black, and particle size of the iron minerals in the bauxites and is unrelaled to the alumina hydrate minerals. There is a fair scope for new entrepreneurs to enter in this field.
Plant capacity: 20000 MT/AnnumPlant & machinery: 615 Lakhs
Working capital: -T.C.I: 1875 Lakhs
Return: 17.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Calcined Bauxite - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

The industry grow steadily based soundly on new and expanding markets created largely by its own study of the properties of aluminium and of the avenues for economical consumption of this new metal. With this growth in manufacture came a decrease in cost, which was largely passed onto customers, even reducing the price 33 cents per kilograms. The price has gradually increased and was $ 1.58 per kilogram in 1980, reflecting inflation and sharp increases in electrical costs. Aluminium is the major nonferrous metal. Residual rocks, in which the alumina trihydate and monohydrate minerals gibbsite, boehmite, and diaspore predominate are classified as bauxites. Other residual minerals are developed in the unique type of rock weathering which produce bauxites, and these minerals kaolinite, halloysite, goethite, hematite, magnetite, anatase, quartz, and some phosphatic and manganiferous minerals may from the lesser constituents of bauxites. Since bauxites have formed from a variety of rock types, minor quantities of residual minerals resistant to weathering. Kaolinite is the chief clay mineral in older bauxites. Thick residual laolinic clays sometimes envelope and usually lie immediately under bauxites. These residual kaolinic clays become more quartzose and halloysitic at depth near the weathered rock contact. Halloysite is rare in older bauxites, but it is a common constituent of younger bauxites and with quartz is usually the main constituent of the residual clays underlying younger bauxites. Some alumina hydrates and hydrour Aluminium silicates are produced also from the breakdown of amphiboles and pyroxenes in igneous, volcanic and melamorphic rocks. Although certain almost pure calcareous rocks from bauxite no bauxite has been found which is known to be derived from coarse high silica or ultra basic rocks. There is very good scope for manufacture of calcined bauxite.
Plant capacity: 20000 MT/AnnumPlant & machinery: 615 Lakhs
Working capital: -T.C.I: 1898 Lakhs
Return: 22.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Sand lime Bricks Manufacturing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

In the construction industry in India, while efforts are being made to introduce new technologies to expedite the work process and streamline it, the materials incorporated in production have not seen much upgradation. Sand lime bricks are used for the all building construction. These bricks do not have any effects on motors materials or concrete or upon materials used for damp-proof courses, flashing, ties or faslenings provided that the sand or other aggregate used is free from soluble salt and does not have a high alkali content. Sand lime bricks have allowed co-efficient of variation of strength, thus enabling the designing of brickwork with a low factor of safety. By the use of high strength sand lime bricks in place of clay-bricks or stone masonry, wall thickness can be reduced even for multistoried buildings. It has good scope according to selected area where brickfield is required.
Plant capacity: 60000 Nos./DayPlant & machinery: 51 Lakhs
Working capital: -T.C.I: 182 Lakhs
Return: 53.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 2 of 61 | Total 610 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 60 61   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top