Google Search

Search

Already a Member ?

Best Business Opportunities in Chad, Africa- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 10 of 31 | Total 309 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 30 31   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

It is an instrument which is used for injecting any liquid into the body of human beings or of animals. These syringes are used for injecting the medicine into the body or into the nerve of the body which are not possible to take in through mouth or takes much time in mixing with blood. A syringe is a simple piston pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (the barrel), allowing the syringe to take in and expel a liquid or gas through an orifice at the open end of the tube. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel. The constantly increasing use of Disposable Syringes made of plastic Material indicates its importance, which is based mainly on the advantages it offers regarding cost and hygienic applications. Due to their availability is sterilized condition, ready to use and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. Disposable syringes are mostly injection moulded from polypropylene. Syringes are available in sizes of 1ml, 2ml, and 10ml, in a variety of designs and consist of either two or three components in their material of construction. The number and size of injection moulding machines required depends upon syringe construction, number of mould cavities and annual production. Uses & Applications Disposable syringes commonly are used in modern medicine for the injection of drugs and vaccines or for the extraction of blood. Among the common uses of disposable syringes are the injecting of insulin by a diabetic person and the administering of a local anesthesia by a dentist. Disposable syringes are favored over reusable syringes for vaccines, in order to avoid the risk of transmitting blood-borne diseases such as human immunodeficiency virus (HIV) and hepatitis from one person to another. Disposable syringes also are used to inject anesthetics for medical procedures. They can be used either alone or in combination with anesthetic gas for general anesthesia. They can be used in combination with anesthetic spray or cream for local anesthesia. The syringes used by dentists to administer local anesthesia before drilling or pulling teeth are a common example. Disposable syringes sometimes are used for drawing blood samples. They allow greater precision than evacuated tube systems, so syringes used together with butterfly needles often are favored when drawing blood. Market Survey The Indian healthcare sector, including pharmaceutical, diagnostics and hospital services, is expected to more than double its revenues to Rs 2500 bn by 2014. Expenditure on healthcare services, including diagnostics, hospital occupancy and outpatient consulting, the largest component of this spend is expected to grow more than 125% to Rs 1560 bn. The Indian domestic Medicare devices industry is expected to grow from Rs 60 bn to Rs 76.5 bn in four years. The overall market is estimated at Rs 150 bn. A major part of the demand is met through imports. Devices, such as catheters and stents represent nearly two-fifth of the entire range of diagnostic devices and most critical as per international classification. Presently medical devices are treated like drugs and regulated by state drug regulators under the drug law - Drugs and Cosmetics Act. Guidelines would make it mandatory for producers to get their products certified by notified bodies like ISO and BIS. The market for non-premium equipments, appliances and disposables is, however, dominated by the domestic manufacturers, while foreign suppliers and Indian companies with foreign alliances dominate the high-end hi-tech medical equipment and appliances. With the healthcare sector being opened up to private players, India is now emerging as a lucrative market for global firms dealing in hi-tech diagnostic and imaging equipment. In the Indian single uses syringes market, which is nearly 1.5 bn units strong, Hindustan Syringes and Medical Devices (HMD) enjoys a 65% market share. Imports constitute 10% of this market. In the single use needles market, HMD has a 70% market share, followed by imported brands with a 25% market share. The size of the local needles market is 2.5 bn units per annum. With the opening of healthcare sector, the market for medical equipment and accessories has become more vibrant. A large number of new medical facilities have been created by a large numbers of service providers, which is indicative of the great potential for medical equipment in India. The Indian market is expanding in all directions as a result of better affordability, greater health consciousness and expanding medical service institutions. With a population of 1.15 bn, India will need to at least 2 mn beds in the next 10 years in order to attain a modest target of 2 per 1000 of population. With a total healthcare value of USD 400 bn, the potential for Medicare equipment is, indeed large. Although there is a large untapped potential, the industry is confronted with problems of low volumes, high cost of production/operation, and rapid obsolescence as a result of accelerated, almost continuous, technological breakthroughs. The fragmentation of production facilities forestalls any worthwhile effort at R&D. This leads to industry's dependence on imported technology. Nonetheless, it is crystal clear that with the fast commercialization process of the sector and upgradation of medical facilities, the potential is sky-high. Few Major Players are listed below: Albert David Ltd. Disposable Medi-Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd.
Plant capacity: 180 Lakh Nos. /annumPlant & machinery: 245 Lakhs
Working capital: -T.C.I: Cost of Project: 455 Lakhs
Return: 26.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

It is an instrument which is used for injecting any liquid into the body of human beings or of animals. These syringes are used for injecting the medicine into the body or into the nerve of the body which are not possible to take in through mouth or takes much time in mixing with blood. A syringe is a simple piston pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (the barrel), allowing the syringe to take in and expel a liquid or gas through an orifice at the open end of the tube. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel. The constantly increasing use of Disposable Syringes made of plastic Material indicates its importance, which is based mainly on the advantages it offers regarding cost and hygienic applications. Due to their availability is sterilized condition, ready to use and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. Disposable syringes are mostly injection moulded from polypropylene. Syringes are available in sizes of 1ml, 2ml, and 10ml, in a variety of designs and consist of either two or three components in their material of construction. The number and size of injection moulding machines required depends upon syringe construction, number of mould cavities and annual production. Uses & Applications Disposable syringes commonly are used in modern medicine for the injection of drugs and vaccines or for the extraction of blood. Among the common uses of disposable syringes are the injecting of insulin by a diabetic person and the administering of a local anesthesia by a dentist. Disposable syringes are favored over reusable syringes for vaccines, in order to avoid the risk of transmitting blood-borne diseases such as human immunodeficiency virus (HIV) and hepatitis from one person to another. Disposable syringes also are used to inject anesthetics for medical procedures. They can be used either alone or in combination with anesthetic gas for general anesthesia. They can be used in combination with anesthetic spray or cream for local anesthesia. The syringes used by dentists to administer local anesthesia before drilling or pulling teeth are a common example. Disposable syringes sometimes are used for drawing blood samples. They allow greater precision than evacuated tube systems, so syringes used together with butterfly needles often are favored when drawing blood. Market Survey The Indian healthcare sector, including pharmaceutical, diagnostics and hospital services, is expected to more than double its revenues to Rs 2500 bn by 2014. Expenditure on healthcare services, including diagnostics, hospital occupancy and outpatient consulting, the largest component of this spend is expected to grow more than 125% to Rs 1560 bn. The Indian domestic Medicare devices industry is expected to grow from Rs 60 bn to Rs 76.5 bn in four years. The overall market is estimated at Rs 150 bn. A major part of the demand is met through imports. Devices, such as catheters and stents represent nearly two-fifth of the entire range of diagnostic devices and most critical as per international classification. Presently medical devices are treated like drugs and regulated by state drug regulators under the drug law - Drugs and Cosmetics Act. Guidelines would make it mandatory for producers to get their products certified by notified bodies like ISO and BIS. The market for non-premium equipments, appliances and disposables is, however, dominated by the domestic manufacturers, while foreign suppliers and Indian companies with foreign alliances dominate the high-end hi-tech medical equipment and appliances. With the healthcare sector being opened up to private players, India is now emerging as a lucrative market for global firms dealing in hi-tech diagnostic and imaging equipment. In the Indian single uses syringes market, which is nearly 1.5 bn units strong, Hindustan Syringes and Medical Devices (HMD) enjoys a 65% market share. Imports constitute 10% of this market. In the single use needles market, HMD has a 70% market share, followed by imported brands with a 25% market share. The size of the local needles market is 2.5 bn units per annum. With the opening of healthcare sector, the market for medical equipment and accessories has become more vibrant. A large number of new medical facilities have been created by a large numbers of service providers, which is indicative of the great potential for medical equipment in India. The Indian market is expanding in all directions as a result of better affordability, greater health consciousness and expanding medical service institutions. With a population of 1.15 bn, India will need to at least 2 mn beds in the next 10 years in order to attain a modest target of 2 per 1000 of population. With a total healthcare value of USD 400 bn, the potential for Medicare equipment is, indeed large. Although there is a large untapped potential, the industry is confronted with problems of low volumes, high cost of production/operation, and rapid obsolescence as a result of accelerated, almost continuous, technological breakthroughs. The fragmentation of production facilities forestalls any worthwhile effort at R&D. This leads to industry's dependence on imported technology. Nonetheless, it is crystal clear that with the fast commercialization process of the sector and upgradation of medical facilities, the potential is sky-high. Few Major Players are listed below: Albert David Ltd. Disposable Medi-Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd.
Plant capacity: 180 Lakh Nos. /annumPlant & machinery: 245 Lakhs
Working capital: -T.C.I: Cost of Project: 455 Lakhs
Return: 26.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

It is an instrument which is used for injecting any liquid into the body of human beings or of animals. The Indian healthcare sector, including pharmaceutical, diagnostics and hospital services, is expected to more than double its revenues to Rs 2500 bn by 2014. The Indian domestic Medicare devices industry is expected to grow from Rs 60 bn to Rs 76.5 bn in four years. The overall market is estimated at Rs 150 bn. A major part of the demand is met through imports. With the healthcare sector being opened up to private players, India is now emerging as a lucrative market for global firms dealing in hi-tech diagnostic and imaging equipment. In the Indian single uses syringes market, which is nearly 1.5 bn units strong, Hindustan Syringes and Medical Devices (HMD) enjoys a 65% market share. Imports constitute 10% of this market. In the single use needles market, HMD has a 70% market share, followed by imported brands with a 25% market share. The size of the local needles market is 2.5 bn units per annum. It is crystal clear that with the fast commercialization process of the sector and upgradation of medical facilities, the potential is sky-high. Few Major Players are listed below: Albert David Ltd. Disposable Medi-Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd.
Plant capacity: 180 Lakh Nos. /annumPlant & machinery: Rs.245 Lakhs
Working capital: -T.C.I: Cost of Project:Rs. 455 Lakhs
Return: 26.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Packaged Drinking Water - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

As the name implies, the mineral water is the purified water fortified with requisite amounts of minerals. It is either obtained from natural resources like spring and drilled wells or it is fortified artificially by blending and treating with mineral salts. Bottled water is the most dynamic market of all the food and beverage industry. Its major use is in five star Hotels and Hospitals where good quality pure water is required for potable purposes. It is marketed at places and regions where hygienic drinking water is not freely available. The foreigners consumed it in large quantity for drinking purpose. The total size of the bottled water market in India is estimated at Rs 20 bn. In bottled water market, the cost of entry and the cost of exit is low. One does not require much equipment to make bottled water. The bottled water market is growing at a rapid rate of around 20% a year. At this growth rate, the market is estimated to overtake the soft drinks market soon. Few Major Players are listed below: Ajay Enterprises Ltd. Akash Housing Ltd. [Merged] Aradhana Snack Foods Co. Bikaji Marketing Ltd. Bisleri International Pvt. Ltd. Durgapur Projects Ltd. G E I Foods Ltd. Golden Anchor Pvt. Ltd. Jagatjit Industries Ltd. Keventer Agro Ltd. Mohan Meakin Ltd. Mount Everest Mineral Water Ltd. N E P C Agro Foods Ltd. Nuway Organic Naturals India Ltd. Orient Beverages Ltd. Parle Bisleri Pvt. Ltd. [Merged] Parle International Pvt. Ltd. Pepsico India Holdings Pvt. Ltd. Pondicherry Agro Service & Inds. Corpn. Ltd. Rose Valley Inds. Ltd. Sparkle Foods Ltd. Sri Sarvaraya Sugars Ltd. Surat Beverages Ltd. Vaarad Ventures Ltd. Vijay Shanthi Builders Ltd.
Plant capacity: 3000000 Ltrs. /AnnumPlant & machinery: 24 Lakhs
Working capital: -T.C.I: Cost of Project: 112 Lakhs
Return: 24.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Rock Sand - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Natural or River sand are weathered and worn out particles of rocks and are of various grades or sizes depending upon the amount of wearing. Now-a-days good sand is not readily available; it is transported from a long distance. Those resources are also exhausting very rapidly. The artificial sand produced by proper machines can be a better substitute to river sand. The sand must be of proper gradation. The sand should be sharp, clean and course. The grains should be of durable material. The grain sizes must be such that it should give minimum voids. There is standard specification for Fine aggregates (Sand). It is divided in four gradations. Generally known as Zone I, Zone II, Zone III and Zone IV. There is sieve Designation for each grade. There are testing sieves for testing the sand. A set of Sieves with square hole is available. Followings are the sieves 4.75 mm,2.365,1.1830,600 microns,300 microns,150 microns pan Specific percentage are designated for each size for each Zone sand in terms of material retained or passed 'from the sieves. The Indian economy has witnessed considerable progress in the past few decades. Most of the infrastructure development sectors moved forward, but not to the required extent of increasing growth rate up to the tune of 8 to 10 per cent. The Planning Commission has estimated that investment requirement in infrastructure to the tune of about INR14,50,000 crore or US$320 billion during the 11th Five Year Plan period. The infrastructure, industrial and commercial construction markets collectively accounted for 74.2% of the total Indian construction industry in 2012. Consequently, the contribution of these three markets will be significant to the overall Indian construction industry growth over the forecast period. The Indian construction industry’s output is expected to record a CAGR of 15.45% over the forecast period. Any new entrant can successfully venture in to this field.
Plant capacity: 9 Lakh MT/AnnumPlant & machinery: Rs. 707 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 1067 Lakhs
Return: 25.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A syringe is a simple piston pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (the barrel), allowing the syringe to take in and expel a liquid or gas through an orifice at the open end of the tube. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel. Disposable Syringes made of plastic Material have been successfully used in medical and pharmaceutical practice for many years. The constantly increasing use of this type Syringe indicates its importance, which is based mainly on the advantages it offers regarding cost and hygienic applications. Disposable syringes commonly are used in modern medicine for the injection of drugs and vaccines or for the extraction of blood. The often are used instead of reusable syringes in an effort to avoid spreading a disease. Among the common uses of disposable syringes are the injecting of insulin by a diabetic person and the administering of a local anesthesia by a dentist. The market for non-premium equipments, appliances and disposables is, however, dominated by the domestic manufacturers, while foreign suppliers and Indian companies with foreign alliances dominate the high-end hi-tech medical equipment and appliances. Among the leading providers of advanced products are Siemens, GE, Philips Medical Systems, Toshiba, Hitachi and Boston Scientific. So any new entrants can venture in to this industry. Few Indian Major Players are as under:- Albert David Ltd. Disposable Medi-Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd.
Plant capacity: Syringes (2 ml) : 90 Lakh Nos. /Annum,Syringes (5 ml) : 90 Lakh Nos. /AnnumPlant & machinery: Rs. 245 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 455 Lakhs
Return: 26.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Rickshaw/Cycle Tyre & Tubes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bicycle and rickshaw tyres & tubes are the backbone of the bicycle and rickshaw. There are few numbers of organized manufacturing companies which are engaged in the quality grade cycles tyres and tubes and few unorganized private companies also engaged to manufacture bicycle/rickshaw tyres. Bicycles/rickshaw continues to be the principal mode of transport for the low and middle income families. This is because the bicycle is both environment and people friendly. India is the largest producer of bicycles next only to china. It Produces around 1.26 crore bicycles every year; with almost each day witnessing new designs, colours and features. Today, the Indian bicycle manufacturing and bicycle parts industry is widely recognized for its quality standards in the international market. The Indian bicycle industry over the years has introduced a variety of new models of bicycles, viz, sports and high-tech models, both for domestic and export market. Ludhiana in Punjab is popularly known as the bicycle capital of the country, accounting for as much as 80 per cent of the bicycles and bicycle parts manufactured in India. Kanpur, Mumbai, Sonepat (Haryana), Chennai and Kolkata are the other important production centres for manufacture of bicycles and bicycle parts. To be sure, with over 10 million cycles being sold in the country last year, India is one of the largest markets for cycles the world ever. Though the character of the Indian market is different (it still remains a vastly semi-urban and rural phenomenon), there are indications that it will soon tow the international line.
Plant capacity: Rickshaw & Cycle Tyres : 1,500.00 Nos./Day,Rickshaw & Cycle Tubes: 1,500.00 Nos./Day Plant & machinery: 128 Lakhs
Working capital: -T.C.I: Cost of Project : 570 Lakhs
Return: 26.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Solar Panel

A solar panel is a collection of solar cells. Lots of small solar cells spread over a large area can work together to provide enough power to be useful. The more light that hits a cell the more electricity it produces, so spacecraft are usually designed with solar panels that can always be pointed at the Sun even as the rest of the body of the spacecraft moves around, much as a tank turret can be aimed independently of where the tank is going. Solar panel refers either to a photovoltaic module, a solar thermal energy panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Uses Assemblies of photovoltaic cells are used to make solar modules which generate electrical power from sunlight, as distinguished from a "solar thermal module" or "solar hot water panel." The electrical energy generated from solar modules, colloquially referred to as solar power, is an example of solar energy. The PV MARKET has been on an upward trend for years now. The market is expected to continue to grow until 2050. The demand far outstrips supply and there is a huge gap to be filled. In India, there is about 1.4 GW of module manufacturing capacity and this is expected to increase in the future since the solar PV segment is one part of the entire value chain where the barriers to entry is relatively low. Thus, as an entrepreneur, solar module production offers an exciting opportunity to you. Few Indian Major Players are as under • Central Electronics Ltd. • Environ Energy-Tech Services Ltd. • Epic Energy Ltd. • Euro Multivision Ltd. • H B L Power Systems Ltd. • Helios Photo Voltaic Ltd. • I T I Ltd. • Indosolar Ltd. • J S W Green Energy Ltd. • Jupiter Solar Power Ltd. • N E P C India Ltd. • P L G Power Ltd. • Pentafour Solec Technology Ltd. • Photon Energy Systems Ltd. • Rajasthan Electronics & Instruments Ltd. • Reliance Industries Ltd. • Renewable Energy Systems Ltd. • Res Photovoltaics Ltd. • Shurjo Energy Pvt. Ltd. • Surana Ventures Ltd. • Tata Power Solar Systems Ltd. • Titan Energy Systems Ltd. • Udhaya Semiconductors Ltd. • Ujaas Energy Ltd. • Usha (India) Ltd. • Websol Energy System Ltd. • X L Energy Ltd.
Plant capacity: Solar Panel 5MW/AnnumPlant & machinery: Rs 109 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 450 Lakhs
Return: 25.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Bicycle Tubes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Bicycle tubes are the backbone of the bicycle industries. Few numbers of companies in organized sector are engaged in the quality grade cycles tyres and tubes and few unorganized sector also engaged to manufacturing bicycle tyre and tubes. An inner tube is basically a doughnut-shaped balloon, with a valve for inflation. The only requirement for an inner tube is that it should not leak. Being rubber, they have no rigid structure. If an inner tube is inflated outside of a tire, it will expand to 2 or 3 times its nominal size, if it doesn't explode first. Without being surrounded by a tire, an inner tube can't withstand any significant air pressure. Most of the basic raw materials are indigenously available but there is short supply of natural rubber, it is required to import. Natural rubber is used in the carcass of passenger car cross-ply tyres for its building tack, ply adhesion, and good tear resistance. It is also used in the sidewalls of radial ply tyres for its fatigue resistance and low heat buildup. In tyres for commercial and industrial vehicles, natural rubber content increases with tyre size. Almost 100% natural rubber is used in the large truck and earthmover tyres which require low heat buildup and maximum cut resistance. Natural rubber is also used in industrial goods, such as hoses, conveyor belts, and rubberized fabrics; engineering products, for resilient load bearing and shock or vibration absorption components; and latex products such as gloves, and adhesives. Tubes of motorcycles and bicycle are used in the appropriate vehicle for riding the vehicle. Bicycles continue to be the principal mode of transport for the low and middle-income families. This is because of the bicycle is both environment and people friendly. India is the largest producer of bicycles next only to china. Today, the Indian bicycle manufacturing and bicycle parts industry is widely recognized for its quality standards in the international market. As bicycle continues to be the most popular mode of transport both in urban and rural areas, the demand for bicycle tubes is likely to increase day by day. Moreover, this is a labour intensive type of unit and can be located in rural areas solving rural unemployment problem. Small scale bicycle tube unit can also function as ancillaries to establish large scale manufacturers. As a whole it is a good project for entrepreneurs to invest. ? Few Indian Major Players are as under • Atlas Cycles (Haryana) Ltd. • Avon Cycles Ltd. • Cycle Corporation Of India Ltd. • Dewan Rubber Inds. Ltd. • Dewan Steels Ltd. • Eastman Industries Ltd. • Freedom Industries Ltd. • G R L International Ltd. • Hamilton Industries Pvt. Ltd. • Hero Cycles Ltd. • Majestic Auto Ltd. • Metro Tyres Ltd. • Milton Cycle Inds. Ltd. • Pavan Tyres Ltd. • Poddar Tyres Ltd. • Ralson (India) Ltd. • Rishabh Industries Ltd. • Roadmaster Industries Of India Ltd. • Roxy Exports Ltd.
Plant capacity: Bicycle Tubes: 10,000 Nos. /DayPlant & machinery: Rs 118 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 622 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Granite Mining (E.O.U.) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Granite is a common type of felsic intrusive igneous rock which is granular and phaneritic in texture. These rocks mainly consist of feldspar, quartz, mica, and amphibole minerals. These form interlocking somewhat equigranular matrix of feldspar and quartz with scattered darker biotite mica and amphibole (often hornblende) peppering the lighter color minerals. Granite is nearly always massive (lacking any internal structures), hard and tough, and therefore it has gained widespread use throughout human history, and more recently as a construction stone. The granite used for decorative purposes is a costly material in comparison with other materials. Granite has been extensively used as a dimension stone and as flooring tiles in public and commercial buildings and monuments. Polished granite is also a popular choice for kitchen countertops due to its high durability and aesthetic qualities. In building and for countertops, the term "granite" is often applied to all igneous rocks with large crystals. Few Indian Major Players are as under • A B N Granites Ltd. • Aankit Granites Ltd. • Apollo Trade Ltd. • Ashok Granites Ltd. • B T W Industries Ltd. • Blazon Marbles Ltd. • Charminar Granites Exports Ltd. • D S Q Granites Ltd. • Deccan Granites Ltd. • Divyashakti Granites Ltd. • East India Granites Ltd. • Eastern Granites Ltd. • G M T Metrology Pvt. Ltd. • Garvee Granite Ltd. • Global Stone India Ltd. • Gopikrishna Granites India Ltd. • Grapco Mining & Co. Ltd. • H J S Stones Ltd. • Hallmark Healthcare Ltd. • Inlac Granston Ltd. • Jaswal Granites Ltd. • Johnmeyers Granite Ltd. • Kesar Marble & Granite Ltd. • Madhav Marbles & Granites Ltd. • Mayur Floorings Ltd. • Medley Minerals India Ltd. • Milestone Global Ltd. • Moh Ltd. • Moolchand Exports Ltd. • Natural Stone Exports Ltd. • Pacific Industries Ltd. • Peethambra Granites Pvt. Ltd. • Pokarna Ltd. • Pooja Granites & Marbles Ltd. • Premier Tubes Ltd. • Premium Ganites Ltd. • Rock Copco Ltd. • Sai Saptagiri Granites Ltd. • Sri Vajra Granites Ltd. • Sun Granite Exports Ltd. • Sun Rock Exports Ltd. • Talavadi Rock & Mineral Products Ltd. • Tamil Nadu Minerals Ltd. • Vertical Industries Ltd. • Viraat Granites Pvt. Ltd. • Virtual Industries Ltd. • Voltas International Ltd.
Plant capacity: Granite: 20 Cu.mt/DayPlant & machinery: Rs 695 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1842 Lakhs
Return: 23.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 10 of 31 | Total 309 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 30 31   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top