Google Search


Already a Member ?

Best Business Opportunities in Andhra Pradesh - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Agro-based industry: Project Opportunities in Andhra Pradesh



Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. India is one of the world's largest producers of food, and is the largest producer of milk, sugarcane and tea, as well as the second largest producer of rice, wheat, fruits, and vegetables. Nearly 70% of the population depend on agriculture and agro-based industries. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. 



Andhra Pradesh produces over 9.57 million tons of fruits, vegetables and spices. Andhra Pradesh is the largest egg producer in India 1,000 kilometres of coastline, 8,577 kilometre river length and 102 reservoirs spread over an area of 2.34 lakh hectares have helped Andhra Pradesh develop as the principal producer of marine and fresh water foods, including fish and prawn. State is blessed with different agro-climatic conditions for growing a variety of horticulture crops like fruits, vegetables, spices, tuber crops, plantation crops and floriculture, largest producer of rice in India. The state is a leading producer of cash crops like tobacco, groundnut, dry chilly, turmeric, oilseeds, cotton, sugar and jute, second-largest producer of horticulture products in India; production is expected to reach 22.90 million tonnes by 2020. State produces some of the finest varieties of mangoes, grapes, guavas, papayas and bananas. Number one position in production of sweet lime, lime, papaya, chilly, turmeric and palm oil, second in the production of tomato and coriander, third in pomegranate, fourth in tapioca, lady finger and grapes, and fifth in onions. To achieve the growth envisaged for the agricultural sector, the state intends to promote investment of around US$ 17.07 billion by 2010, while the total investment until 2020 would be around US$ 39.02 billion



In the recent Union Budget (2007-08), agriculture has got considerable attention with the various policy initiatives from the side of finance ministry. Some of the imp0ortant policies are:

·         During 2006-07 (until December 2006), 53.37 lakh new farmers were brought into the institutional credit system. A target of Rs. 225,000 crore as farm credit and an addition of 50 lakh new farmers to the banking system have been fixed for the year 2007-08. The two per cent interest subvention scheme for short-term crop loans will continue in 2007-08, and a provision of Rs.1,677 crore has been made for that purpose.

·         A special purpose tea fund has been launched for re-plantation and rejuvenation of tea. Government soon plans to put in place similar financial mechanism for coffee, rubber, spices, cashew and coconut.

·         Accelerated Irrigation Benefit Programme (AIBP) has been revamped in order to complete more irrigation projects in the quickest possible time. As against an outlay of Rs.7,121 crore in 2006-07, the outlay for 2007-08 has been increased to Rs.11,000 crore.

·         Rs.17,253 crore had been budgeted for fertilizer subsidies in 2006-07. However, according to the Revised Estimates, this will rise to Rs.22,452 crore.

·         The National Insurance Scheme (NAIS) will be continued for Kharif and Rabi crops during the year 2007-08.

·         The two per cent interest subvention scheme will continue in 2007-08.

·         Rs. 100 crores have been allocated to new Rain fed Area Development Programme, set up for coordinating all schemes for watershed development. 





Mineral: Project Opportunities in Andhra Pradesh



A mineral is a naturally occurring solid chemical substance formed through biogeochemical processes, having characteristic chemical composition, highly ordered atomic structure, and specific physical properties. Common rocks are often made up of crystals of several kinds of minerals. Minerals constitute the backbone of economic growth of any nation; India is endowed with significant volume of mineral deposits. It is estimated that India holds abundant reserves of minerals such as non coking coal, iron ore, bauxite (metallurgical grade), dolomite, gypsum, limestone and mica; adequate level of reserves of minerals such as lignite, chromite (metallic), manganese, zinc, graphite; but deficiency in mineral reserves such as coking coal, chromite (refractory grade), bauxite (chemical grade), copper, lead, apatite, rock phosphate and kyanite.


Andhra Pradesh is the second largest storehouse of mineral resources in India.  A total of 48 minerals were located with vast explored resources of coal, limestone, bauxite, barites, mica, beach sands, granite, limestone slabs etc., and good resources of oil and natural gas, manganese, asbestos, iron ore, ball clay, fireclay gold, diamond, graphite, dolomite, quartz, tungsten, steatite, feldspar, silica sand, Uranium, beach sands minerals, etc. State is endowed with the internationally known black, pink, blue and multicoloured varieties of granites. Over 400 mines have reported production in the state of Andhra Pradesh. Some of the major mineral based industries in the state include cement, ceramic & refractories, and sulphuric acid.

The state stands First in value of mineral production, contributing 9 to 10 per cent of the country’s mineral value production. Andhra Pradesh has huge reserves of key minerals such as coal, limestone, granite, bauxite and barytes. In fact, the state is estimated to have one-third of the country's total mineral wealth. Andhra Pradesh is the only southern state with coal deposits and has 20 per cent of the country's limestone reserves and 27 per cent of its bauxite reserves. The world's best granite, Black Galaxy, is found only in Andhra Pradesh. Andhra Pradesh is the second largest producer of cement in the country


The Andhra Pradesh mineral policy aims at optimum exploitation, scientific development, value addition, marketing and exports under private and joint sectors. Mineral, cement and jewellery sectors are identified as thrust areas in the international policy. Simplified entrepreneur friendly structural changes are brought out in the state mineral policy, decentralised, deregulated and introduced prefixed time frame in the processing of mineral concessions at each level for faster implementation of projects. The government has thrown the mineral sector open for private investment & like to withdraw from areas in which their presence is no longer required & disinvest from these public sectors. The ministry of mines regulates & promotes the activities of mining in the country and is responsible for survey and exploration of all the minerals other than coal, natural gas, petroleum and atomic minerals; mining & metallurgy of non ferrous metals like aluminium, copper, zinc,  lead, gold, nickel; providing administration for prospecting and mining laws


Tourism: Project Opportunities in Andhra Pradesh


India’s tourism industry is experiencing a strong period of growth, driven by the burgeoning Indian middle class, growth in high spending foreign tourists, and coordinated government campaigns to promote ‘Incredible India’. Tourism in India is the largest service industry, with a contribution of 6.23% to the national GDP and 8.78% of the total employment in India. The tourism industry has helped growth in other sectors as diverse as horticulture, handicrafts, agriculture, construction and even poultry.


Andhra Pradesh has a variety of attractions including beaches, hills, wildlife, forests and temples. The state has a rich cultural heritage and is known for its rich history, architecture and culture. Andhra Pradesh is the top tourist destination in India. The weather is mostly tropical. Andhra Pradesh attracts the largest number of tourists in India. 3.2 million Visitors visit the state every year. With more than 600 tourist locations, the second largest coast line in the country, 1000 years of history and pilgrimage centres of every major religion of India, Andhra Pradesh is truly "The essence of India". Many sites still depict that Buddhism had its major significance and it was a prime Buddhist centre. Andhra Pradesh is popularly known as “Food bowl of South”. Hyderabad is the capital of Andhra Pradesh, which is a rich cultural city with many places of interests, palaces, museums, parks and religious sites. Andhra Pradesh is home to many wildlife and natural forest reserves with a large variety of flora and fauna. Diverse landscapes, deciduous forest, coastal belt, dense mangrove forest and many rivers of religious importance also originate in Andhra Pradesh. Largest Indian tiger reserve at Nallamala forest and pelican refuge at Kolleru Lake forms an important location for wildlife lovers.



Some of the salient features of the Tourism Policy are:

·         The policy proposes the inclusion of tourism in the concurrent list of the Constitution to enable both the central and state governments to participate in the development of the sector.

·         No approval required for foreign equity of up to 51 per cent in tourism projects. NRI investment up to 100% allowed.

·         Automatic approval for Technology agreements in the hotel industry, subject to the fulfilment of certain specified parameters.

·         Concession rates on customs duty of 25% for goods that are required for initial setting up, or for substantial expansion of hotels.

·         50% of profits derived by hotels, travel agents and tour operators in foreign exchange are exempt from income tax. The remaining profits are also exempt if reinvested in a tourism related project.


Automotive Industry: Project Opportunities in Andhra Pradesh


The automotive industry in India is one of the largest in the world and one of the fastest growing globally. India's passenger car and commercial vehicle manufacturing industry is the seventh largest in the world, with an annual production of more than 3.7 million units. Automotive industry is the key driver of any growing economy. It plays a pivotal role in country's rapid economic and industrial development. It caters to the requirement of equipment for basic industries like steel, non-ferrous metals, fertilisers, refineries, petrochemicals, shipping, textiles, plastics, glass, rubber, capital equipments, logistics, paper, cement, sugar, etc. It facilitates the improvement in various infrastructure facilities like power, rail and road transport. Due to its deep forward and backward linkages with almost every segment of the economy, the industry has a strong and positive multiplier effect and thus propels progress of a nation. The automotive industry comprises of the automobile and the auto component sectors.




Andhra Pradesh recognizes the enormous economic potential of automotive industry for the future development of the state. The economic benefits of the automobile industry to a host economy are legion. The immediate tangible benefits of the automotive industry are employment generation, fast development of key linkage industries liked steel, plastics, paints, etc., improvement in technological and related skill levels in various supporting industries, increased exports, increased revenues, etc. The automotive component manufacturing industry has a major share in the economic map of Andhra Pradesh. An abundance of skilled and non-skilled labourers helped the industry flourish in Andhra Pradesh and today there are more than 100 automotive component manufacturing companies in the state. 


The government policies on Indian automobile industry have been framed in order to aid in the expansion of the automobiles sector in India. The Auto Policy has spelt out the direction of growth for the auto sector in India and addresses most concerns of the automobile sector, including-

·         Promotion of R&D in the automotive sector to ensure continuous technology up gradation, building better designing capacities to remain competitive.

·         Impetus to Alternative Fuel Vehicles through appropriate long term fiscal structure to facilitate their acceptance.

·         Emphasis on low emission fuel auto technologies and availability of appropriate auto fuels and encouragement to construction of safer bus/truck bodies - subjecting unorganised sector also to 16% excise duty on body building activity as in case of OEMs.

The government has recently proposed for an infrastructure that will provide one stop clearance for any kind of proposal for foreign direct investment in the automotive sector. This will include the local clearance system also for the same purpose. There are also plans for imposing a 100 % tax deduction on export profits. The government has also proposed for a concession in import duty for the establishment of new manufacturing units and industrial holdings.




Biotechnology: Project Opportunities in Andhra Pradesh



Biotechnology is gaining increasing ground in India. It is said that the 21st century belongs to this technology. Biotechnology is a frontier technology which has the potential to provide very substantial benefits to society in a wide range of sectors such as agriculture, medical and health, forestry, animal husbandry, environment protection, and improving the quality of products and services. The frontier technology is finding application in the field of healthcare, food, agriculture, horticulture, biopharmaceuticals, environmental protection, etc. The commercialisation of this technique for the betterment of mankind is poised to grow rapidly. The State is leading centre for Biotechnology and several global and Indian Biotechnological companies, global renowned research institutions.


Andhra Pradesh is the leading centre for Biotechnology and is known as Vaccine Capital of India. The Biotech industry is Andhra Pradesh accounts for 43% of the total biotech revenue generated by companies in South India. Hyderabad has become the Centre for International Bio Events like Bio India and Bio Asia. Technology will play a critical role in accelerating the pace of development in the State. Andhra Pradesh is endowed with rich bio-resources. There are 7 agro-climatic zones across the State, with 19 major food and commercial crops grown in different parts of the State. There are more than 5000 species of trees and, out of these, 2000 species are flowering trees. About 40 percent of the land is utilised for agriculture and 23 percent of the land is covered by forests in the State. Andhra Pradesh has unique proven expertise, commercial success and thus a competitive edge in biotechnology. With the increasing convergence of these technologies, Andhra Pradesh is poised to forge further ahead. In Agri-biotech, tissue culture for food crops and ornamental plants has been taken up in several parts of the state with considerable success.


The Government of Andhra Pradesh has identified the biotechnology sector as engine of economic growth and one of the thrust areas that has the potential to make a positive contribution to the life of the common man. The Government has consistently pursued proactive policies and undertaken several initiatives to support and promote the biotechnology sector in the State. Government of Andhra Pradesh has several firsts to its credits in the area of Bio sector. Key Highlights of the Policy:

·         Single Window Clearance System

·         Sales tax of 1%

·         Provision of rebate based on the employment opportunity created

·         To support the various initiatives being undertaken, the Government proposes to redraft the biotech policy and introduce positive changes that would enable an investor friendly environment.



Waste management: Project Opportunities in Andhra Pradesh


Waste utilization, recycling and reuse plays a major role in limiting resource consumption and the environmental impact of waste. Recycling is an integral part of any waste management system as it represents a key utilization alternative to reuse and energy recovery (Waste-to-Energy). Which option is ultimately chosen depends on the quality, purity and the market situation. Hazardous waste management is a new concept for most of the Asian countries including India. The lack of technical and financial resources and the regulatory control for the management of hazardous wastes in the past had led to the unscientific disposal of hazardous wastes in India, which posed serious risks to human, animal and plant life.



In A.P., the collection and transportation constitutes 80 to 95% of total budget of solid waste management, hence it forms key component in determining the economics of whole waste management. Besides other factors like collection and transportation time, routing, the design and carrying capacity of vehicles, types of bins will have bearing effect on the efficient waste management system. It is preferable to use vehicles having mechanical loading system and with closed system of having no dust/smell nuisance during the transportation.


National policy on waste management is set out in the October 1998 policy statement on waste management - Changing our Ways. It outlines the Government's policy objectives in relation to waste management, and suggests some key issues and considerations that must be addressed to achieve these objectives. The policy is firmly grounded in an internationally recognised hierarchy of options, namely prevention, minimisation, reuse/recycling, and the environmentally sustainable disposal of waste which cannot be prevented or recovered.


Petroleum, petrochemicals, Chemicals: Project Opportunities in Andhra Pradesh


The Petroleum, Chemical and Petrochemical industry in India is well established and has recorded a steady growth over the years. The industry offers a wide scope for development that contributes positively to economic growth and regional development. The future outlook for the industry is bright with positive developments anticipated in various chemical and sub-sectors. The Indian chemical industry is an integral component of the Indian economy contributing around 67% id Indian GDP (Gross Domestic Product). In terms of consumption the chemical Industry is its own largest customer and accounts for approximately 33% of the consumption. Chemical Industries are very important for the economy of any country. This is because; these Chemical Industries supply the farmers Pesticides and Fertilizers which are essential for crop growing. In this way Chemical Industries contribute to agriculture and food self sufficiency of every country.


Andhra Pradesh is identified to locate PCPIR (Petroleum, Chemical, and Petro-Chemical Investment Regions) near Visakhapatnam in an area of 250 Sq. Kms (62,000 acres).



Ministry of Chemicals & Fertilisers, Department of Chemicals & Petrochemicals, and Government of India had prepared the PCPIR policy duly addressing the following issues and policy would be announced very shortly:

·         Feedstock availability and its pricing,

·         Incentives and package of the Government of  India,

·         Identification of location of PCPIRs,

·         legal framework for the PCPIR policy,

·         State’s commitment and their incentive  packages

·         Mechanism for inter-action with identified / prospective investor’s / developers.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 16 of 264 | Total 2637 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 263 264   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

ROLLER FLOUR MILL (ATTA, MAIDA & SUJI)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Roller Flour mill serve the purpose of processing wheat to convert it into flour. The plant will have facility to produce, maida, suji, atta and bran. These products will be sold as per the guidance issued for Food and Civil Supplies Department of the concerned state. Thus milling is an imperative physical function involved in converting wheat into its milled products. Separating the wheat grain into its constituents (bran, germ and endosperm) Wheat grains are the seed of the wheat plant, which is able to grow in kinds of soil and under widely differing climatic conditions. The principle wheat of commerce belongs to the botanical groups Triticum vulgane, Triticum drum and Triticum compactum. A grain of wheat is avoided in shape and it bears at one end a number of short fine Grains. The grains of wheat consists of three main parts the enveloping skins, the embryo and the endosperm. The relative proportions of these parts vary with the plumpness of the grain but the average composition of wheat is 83% endosperm, 2.5% embryo and 14.5% enveloping skins. The enveloping skins are pericarp consists of the epidermis, epicarp and endocarp. The pericarp represents about 6% of the grain. The seed coat consists of the testa, the hyaline layer which comprises about 2% of the grain. The aleurone layer representing about 6.5% of the grain wheat show a wide range of analytical data which is not unexpected in view of the many varieties which are grown and the very different conditions under which they are cultivated. Flourmill consists of following machineries as blender, sieves, breaks rolls, smooth steel reduction, rolls aspirators, conveyors water washers etc. Flour is classified according to the amount of grain included in the final product. Grain processing systems are generally based on the separation of the following components of the grain: Bran is the hard, brownish outer protective skin of the grain (varies from 6% in corn to 16% in wheat). Bran layers include the cuticle, mesocarp, cross layer, tube cells and testa. The bran layers are a concentrated source of dietary fibre. Endosperm is the inner part of the grain (varies from 60% in rice, barley and oats to 80% of the grain in wheat). It provides the growing plant with food. The main nutrients in the endosperm are protein and carbohydrate. Aleurone consists of one or more layers of cells between the bran and the endosperm (8-10% of total grain). The number of layers varies from 1 cell thick in wheat, rye, oats and maize to up to 3 cells thick in barley and rice. The aleurone layer is a concentrated source of vitamins, minerals and other nutrients. Germ is the part of the seed that becomes a new plant if the seed is sown (varies from 12% in maize and 10% in sorghum to as low as 2% or 3% in other grains). It consists of the embryo and the scutellum. Most of the grain kernel's fat and vitamin E content is found in the germ. The RFM industry is basically in agro-based processing industry engaged in the manufacture of products based on wheat, namely maida, suji, atta and bran. In some states, under special arrangements RFM units produce whole meal atta to meet the requirements of various distribution programmes. Apart from direct consumption by general consumers, maida and sooji produced by RFM units serve as the most important raw material to more than 55 thousand units manufacturing bread, biscuit and bakery products all over the country. Besides this the resultant wheat bran serves as the poultry feed. There is a good scope to venture into this field. Few Major players are as under: Ambe Agro Inds. Ltd. Patna Ambuja Flour Mills Ltd. Patna Anirudh Foods Ltd. North West Delhi Ankit India Ltd. Kolkata Aruppukottai Shri Ramalinga Roller Flour Mills Ltd. Ramanathapuram Bambino Agro Inds. Ltd. Hyderabad Bannari Amman Flour Mill Ltd. Coimbatore Calcutta Flour Mills Ltd. Kolkata Cargill India Pvt. Ltd. Gurgaon Century Flour Mills Ltd. Chennai D F M Foods Ltd. North Delhi Delhi Flour Mills Co. Ltd. North Delhi Flour & Food Ltd. Gallantt Udyog Ltd. Kolkata General Mills India Pvt. Ltd. Mumbai Govind Mills Ltd. Puruliya Gupta Nutritions Pvt. Ltd. Patna Himanshu Flour Mills Ltd. Bhopal Hyderabad Roller Flour Mills Co. Ltd. Hyderabad Jai Mata Foods Ltd. Sangrur Kaushalya Roller Flour Mills Pvt. Ltd. Thane Koodal Industries Ltd. Madurai Modern Flour Mills Ltd. North West Delhi Naga Ltd. Chennai Naga Overseas Pvt. Ltd. Chennai Nath Roller Flour Mills Pvt. Ltd. Muzaffarnagar Okara Flour & General Mills Ltd. Central Delhi Parakh Agro Inds. Ltd. Dhar Patiala Flour Mills Co. Ltd. Patiala Pawan Udyog Ltd. Puruliya Poona Roller Flour Mills Ltd. Pune Prahlad Flour Mills Ltd. Lucknow R K Patel Food Pvt. Ltd. Jalgaon Rohini Foods Pvt. Ltd. Chennai S K Roller Flour Mills Ltd. Sakthi Murugan Agro Foods Ltd. Coimbatore Sakthi Murugan Roller Flour Mills Ltd. Coimbatore Shakti Bhog Foods Ltd. North West Delhi Shree Bankey Behari Exports Ltd. North Delhi Sita Shree Food Products Ltd. Indore Sree Behariji Mills Ltd. Patna Sunil Agro Foods Ltd. Bangalore Super Bakers (India) Ltd. Ahmadabad Trambakam Flour Mills Ltd. Jaunpur U F M Industries Ltd. Cachar Vasai Roller Flour Mills Pvt. Ltd. Thane Vrundavan Agro Inds. Ltd. Panch Mahals Wallace Flour Mills Co. Ltd. Mumbai Wellgo Agro Inds. Ltd. Puruliya Zest Gartex Ltd. Jaipur
Plant capacity: Maida 9500 MT/Year, Atta 3000 MT/Year,Suji 10000 MT/Year,Bran 6600 MT/YearPlant & machinery: 132 Lakhs
Working capital: -T.C.I: 1328 Lakhs
Return: 51.00%Break even: 29.00%
Add to Inquiry Add to Inquiry Basket

FURFURAL FROM CORNCOBS, RICE HUSK & SUGARCANE BAGASSE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

Furfural is produced from agricultural waste biomass that contain pentosans, which are aldose to sugars, composed of small rings formed from short five-member chains, that constitute a class of complex carbohydrates, present in cellulose of many woody plants such as corn cobs, sugar cane bagasse, rice and oat hulls etc. Furfural is a clear, colorless motile liquid with a characteristic almond-benzaldehyde odor. Any material containing pentosans can be used for the production of furfural. Technically furfural is produced by acid hydrolysis of the pentosan contained in woody biomass. Furfural is the only organic compound derived from biomass that can replace the crude oil based organics used in industry. Furfural is used as a solvent in petrochemical refining to extract dienes from other hydrocarbons. Furfural, as well as its derivative furfuryl alcohol, can be used together with phenol, acetone, or urea to make solid resins. Furfural can be used for the production of lubricants; specialist adhesives and plastics; and nylons. It is the starting material for cycling shorts and many more. The demand for furfural and furfuryl alcohol in the international market will maintain stable growth for the next few years. Due to problems in environmental impact and cost, the output of furfural in advanced countries such as the United States and European countries will decline further owing to the relatively low production cost of furfuryl alcohol in India. Expanded production of downstream products can remarkably increase the added value of India’s furfural and furfuryl alcohol industrial chain. The production of the (tetrahydrofuran) and PTMEG (polytetramethylene ether glycol) using furfural as raw material is an important way to increase the added value and is worth great attention from furfural producers. Production of furfural and furfuryl alcohol is projected to increase at an average annual rate of 5% provided no shortage of raw material (corncobs) is experienced. China is the only major region where increased furfural production is expected in the next five years. There is a good scope to venture into this field for new entrepreneurs.
Plant capacity: 600 MT/AnnumPlant & machinery: 69 Lakhs
Working capital: -T.C.I: Cost of Project : 278 Lakhs
Return: 41.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

GOOD PROSPECTS - FORGING UNIT FOR AUTOMOBILE SPARE PARTS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Plant Layout

The forging industry, as it is known today, makes use of various types of forging equipment for the practical duplication of forged parts for commercial services. Such forging equipment includes the drop hammer, the mechanical and hydraulic forging press, and the single and double frame general forging hammers. Steel forging is a process to shape various steel products without any air cavity according to users requirement. The most used are in axels, steering gears and components for automobiles industrial machinery, agriculture implement, machine tools, defence etc. Normally two types of forgings are used. These are closed die forging and open die forging. Open forging are used in manufacturing of shaft for electric motors turbines, agricultural implements, industrial machinery etc, while closed die is used mainly for railways and automobile industry. All the types of vehicles need forged products, however, in terms of per unit requirement, two wheeler require very small quantity compared to four wheelers. Steel is the only raw material required for steel forging. The era of modern growth in India has its first foot prints on automobile industry. New models of cars, scooter, buses, etc, not only providing increased oxygen to auto ancillary industry but to many industries like steel forging, casting, automobile paints etc. However, the trend in steel forging is encouraging in the automobile industry in last ten years. India enjoys advantages in exports of forging because of cheaper technical and skilled manpower as compared to that available in developed countries because of strict environmental laws. USA, Russia, Other countries of Eastern Europe are the major importers of steel forging of specialized applications. There is a considerable potential for upgradation of skills, equipment and technology in the Indian forgings sector. The future of steel forging is associated with the development of the automobile industry. Since the automobile industry is getting metamorphosed with the entry of the multinationals, the steel forging industry can look forward to impressive growth with high value addition. Automotive Industry comprises of automobile and auto component sectors and is one of the key drivers of the national economy as it provides large-scale employment, having a strong multiplier effect. Being one of the largest industries in India, this industry has been witnessing impressive growth during the last two decades. The boom in automobile industry has helped steel forging industry growing vertically and horizontally. However the growth in steel forging has been less than the growth in automobile industry. As it has been indicated the four-wheel automobile industry has grown at the rate of 12.80 percent per annum the consumption of steel forging in automobile industry has increased at a lower rate. The reasons are many folded. Thus there is a vast scope for new units to come up. However, they have to take into consideration the requirements of automobile particularly four-wheel manufacturers and gear up their capacities accordingly. Auto majors in the country are enjoying the best growth phase ever. With sales up for 13 months in a row, the coming months is also expected to be closed on a high note. India is estimated to post a robust economic growth of 8.3 per cent in 2010, according to a recently released report titled 'Economic and Social Survey of Asia and the Pacific 2010' by the United Nations. The country's automobile sector, primarily passenger vehicles segment have registered a growth of 33.93 per cent in sales in April 2010. Indian companies are very optimistic. The Auto Components Manufacturers Association (ACMA) along with McKinsey has pegged domestic demand for components at $20-25 billion in 2015 from $1.4 billion in 2004-05. This would take the overall industry size to $40-45 billion by 2015 in India. The Indian automotive industry has made rapid strides since delicensing witnessing the entry of several new manufacturers with state-of-the-art technology. There is good potential to venture into this field.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket


Ready mix concrete is a modern trend of introduction in the Asian Countries. It is already introduced long before in the European Countries. It is new concept of use concrete in the construction area. Ready mix concrete has advantages in the area where immediate requirement of concrete mixture like in the preparation of bridge overhead roads on or the road construction. In India there is a hopeful to get good scope of RMC within short period. The batching, mixing, transportation, placing, compaction, finishing and curing are very complimentary operations to obtain desired good quality concrete. The good quality concrete is a homogeneous mixture of water, cement, aggregates and other admixtures. Admixtures are chemical mixtures that are added to concrete to enhance its performance is some fashion. Admixtures are materials other than cement, aggregate and water that are added to concrete either before or during its mixing to alter its properties, such as workability, curing temperature range, set time or color. Some admixtures have been in use for a very long time, such as calcium chloride to provide a cold-weather setting concrete. Others are more recent and represent an area of expanding possibilities for increased performance. Not all admixtures are economical to employ on a particular project. Also, some characteristics of concrete, such as low absorption, can be achieved simply by consistently adhering to high quality concreting practices. The aim of quality control is to ensure the production of concrete of uniform strength in such a way that there is a continuous supply of concrete delivered to the place of deposition, each batch of which is as nearly like the other batches as possible. India is the second largest producer of cement in the world after China. Cement and ready-mix concrete demand is dependent on the level of construction activities. Construction activities are in turn closely related to a number of macroeconomic factors such as consumer spending, population growth, manufacturing sector growth, inflation rates, government spending etc. The construction industry is the second largest industry in India after agriculture. It accounts for about 11% of India’s GDP. It makes significant contribution to the national economy and provides employment to large number of people. Construction constitutes 40% to 50% of India's capital expenditure on projects in various sectors such as highways, roads, railways, energy, airports, irrigation etc. There are mainly three segments in the construction industry like real estate construction which includes residential and commercial construction; infrastructure building which includes roads, railways, power etc; and industrial construction that consists of oil and gas refineries, pipelines, textiles etc. Building material is any material which is used for a construction purpose. Many naturally occurring substances, such as clay, sand, wood and rocks, even twigs and leaves have been used to construct buildings. Apart from naturally occurring materials, many man-made products are in use. According to a study by ASSOCHAM, the burgeoning Indian construction industry, currently worth $70 billion, will rise to US$120 billion by 2010. The Ready-mix concrete business in India is in its nascent stage. In a developed country 70% of cement produced is used by the Ready-mix concrete industry. However, in India, the Ready-mix concrete industry uses less than 10% of the total cement production. A large and growing middle class population of more than 300 million people, a changing life style, better cost of living etc is growth drivers for this sector. There is good scope to venture into this field for new entrepreneurs. Few Indian Major Players are as under: A C C Concrete Ltd. Ahlcon Ready Mix Concrete Pvt. Ltd. Ahluwalia Contracts (India) Ltd. Ashoka Buildcon Ltd. Grasim Industries Ltd. Larsen & Toubro Ltd. Madras Cements Ltd. Prism Cement Ltd. R D C Concrete (India) Pvt. Ltd.
Plant capacity: 240 Cubic Meter/DayPlant & machinery: 86 Lakhs
Working capital: -T.C.I: 936 Lakhs
Return: 42.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

INTEGRATED UNIT OF RICE MILL, RICE BRAN OIL EXTRACTION WITH CAPTIVE POWER PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

The economics of rice milling industry is largely dependent on the useful commercial utilization of its by-products. The purpose of Integrated Unit is to ensure the total utilization of all the resources or by-products available at disposal from the rice milling process are used efficiently and effectively. The by-products such as rice bran will be used for extraction of rice bran oil; the rice husk will be used for effective co generation of electricity and steam/heat for in-house consumption. The project activity is helping in conservation of natural resources like coal and HSD and above all efficient waste disposal management. Over the last decade and half, India Inc has established itself as a vibrant economy with growing domestic consumption coupled with huge export potential. Stable political environment, dependable democratic fabric of the country, strong legal system, huge talent pool and cost advantage have made India a reliable business partner of the global community, attracting good foreign investment. While the growth trend is set off, there is tremendous need for building the background infrastructural support system to sustain the trend. Rice is the staple food for 65% of the population in India. India has the largest area under paddy in the world and ranks second in the production after China. Country has also emerged as a major rice consumer. Rice is the largest consumed calorie source among the food grains. Rice bran and rice husk are the by-products of the rice milling process. Rice bran is the most important source of edible oil among the unconventional sources. Rice husk, considered as an agricultural waste is a proven clean and efficient biomass fuel which can replace conventional fossil fuel uses. Power being one of the most crucial needs for industrial growth finds its priority and as a result the National Electricity Policy rightly envisages Power for all by 2012. To attain this target, a total capacity addition of about 100,000 MW was projected for 10th and 11th plan period. Although there has been some hectic activity in capacity addition, the possibility of attaining the target looks remote. This increases the responsibility of each industry so as to become self-reliant in power, not only to ensure reduced operational expenses but also to contribute towards making the country self-sufficient in power. There is a very good scope with ample of space for new entrepreneurs to venture into this field. Capacity : Rice 106029 MT/Annum Broken Rice 8389 MT/Annum Rice Bran Oil 2573 MT/Annum Deoiled Rice Bran Oil 13486 MT/Annum Power Distribution 15750 MWh/Annum
Plant capacity: -Plant & machinery: 4373 Lakhs
Working capital: -T.C.I: Cost of Project : 8016 Lakhs
Return: 38.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

U-BOLTS AND CENTRE BOLTS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bolts in various dimensions & head-shapes are available. Bolts, preferably used in through holes with the help of an appropriate nut, are generally with of square/hexagonal heads. Bolts can be supplied unfinished, semi-finished & fully finished conditions. Automotive bolts have hexagonal head. These bolts have greater head depth than regular bolts but have less width across flats. Limits of tolerances are well defined by international standards for over all dimensions. Top of the head is flat and chamfered at an angle 30º while the bearing surface is washer-faced. Either coarse or fine threads of class- 2A are used. Leaf springs are used in automobile vehicles as suspension members. There are two basic types of leaf springs: Multi leaf spring, and Single leaf spring. The multi leaf spring is made up of a series of flat steel plates of graduated length placed one above the other. These plates or leaves are held together at the centre by a centre bolt which passes through concentric holes made in all the leaves. The longest or `master leaf is rolled at both ends to form spring eyes through which bolts are placed to attach the spring ends. U-bolts are used at appropriate distances on the length of leaf springs to hold all the individual leaves intact at their places. This means that with each leaf spring, one centre bolt and more than one U-bolt are used in any leaf spring design. U-bolts and centre leaves are also used on loco suspension leaf springs like auto leaf springs by cold forging of special alloy steels which is the proper technique to make such high tensile bolts. Header, pointer, trimmer and mechanical/hydraulic thread rolling operations are successively undertaken on selected alloy steel wire/rod coil to manufacture bolts. Thereafter, these are drum washed, degreased and dried prior to heat treatment. Also phosphating and zinc plating can be done on these bolts to protect surface from erosion/corrosion. Technical know-how for these bolts is indigenously available. U-bolts are made by press bending straight bolts threaded at both ends. 10 mm to 25 mm steel rods are used as the starting raw material for making these bolts, depending on size of the leaf spring. Fasteners mainly cover nuts, bolts, screws, studs and rivets and are segmented between MS (mild steel) and HT (high tensile) fasteners. These fasteners are used in engineering systems. All types of fasteners, except high tensile and special type fasteners, are reserved for the SSI sector. The overall fasteners market is estimated at about Rs 28 bn. While the organized sector (HT fasteners) has a share of 65%, the balance of 35% is shared by unorganized sector and imports. The imports in 2006-07 were Rs 8 bn, leaving Rs 2 bn or 7% as the market for the unorganized sector in value terms. The market is heavily dependent on imports which have been growing at close to 28.5% in recent period. The boom has been due mainly to the upswing witnessed by the automobile sector, the main end-user industry, accounting for almost half of the demand for fasteners. There is a very good scope in this sector and new entrepreneurs should venture into this field. Few Indian Major Players are as under: Agarwal Bolts Ltd. Brihan Maharashtra Steel Inds. Ltd. Caparo Engineering India Pvt. Ltd. Coventry Spring & Engg. Co. Ltd. Dev Fasteners Ltd. G K W Ltd. G S Auto International Ltd. Gripwell Industries Ltd. Hindusthan Engineering & Inds. Ltd. Holtzman Systems Ltd. I S P L Industries Ltd. Indian Fasteners Ltd. Indian Steel & Wire Products Ltd. Jaico Steel Fasteners Ltd. M C S Fasteners (India) Ltd. Mangal Steel Enterprises Ltd. Map Auto Ltd. Mohindra Fasteners Ltd. Needle Industries (India) Pvt. Ltd. Patheja Forgings & Auto-Parts Mfrs. Ltd. Pooja Forge Ltd. Rambal Properties Pvt. Ltd. Ramesh Auto Inds. Ltd. Rockfort Fasteners Ltd. Simmonds Marshall Ltd. Sky Industries Ltd. Steelite Engineering Ltd. Sundram Fasteners Ltd. T A L Precision Parts Ltd. Technocraft Industries (India) Ltd. Viraj Profiles Ltd.
Plant capacity: U-Bolt & Nut 600 MT/Annum, Centre Bolt & Nut 900 MT/AnnumPlant & machinery: 162 Lakhs
Working capital: -T.C.I: Cost of Project : 343 Lakhs
Return: 42.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

POTATO POWDER, FLAKES & GRANULES WITH COLD STORAGE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Production Schedule

Potato is considered to be one of the traditional food items of India. Potato is the staple food for 2/3rd of the world population. India is presently the 3rd largest potato growing country in the world. Potato is one of the important tuber vegetables, which is consumed throughout the year. Its Botanical name is Solanum tuberosum. The main edible part is its tuber. Potato is one of the most important but perishable groups known. Unprocessed foods are susceptible to spoilage by biochemical processes, microbial attack and infestation. The right post harvest practices such as good processing techniques, and proper packaging, transportation and storage (of even processed foods) can play a significant role in reducing spoilage and extending shelf life. Among various methods of preservation, dehydration of vegetables is one of the most popular and oldest methods. Dehydration increases the storage period of vegetables and make them available throughout the year and even in off-season, thus supplying the important nutrients in a concentrated form. Dehydrated foods are top-quality biological products and foods, picked in the peak of their ripeness and after cleaning and trimming, dehydrated with 98% of their moisture taken out. Dehydrated foods are more concentrated source of minerals than any other preserved form of foodstuff. Almost all dehydrated potato products like flakes, granulates and powder forms are not new to households & restaurants. It has good potential in food processing industries, defenses, pharmaceutical industries, hotels and restaurants, caterers, etc. Potato powder, Granules and flakes are processed dehydrated potato products. The processing of potatoes increases the shelf life of potatoes. There are various machines which are required for the processing of potatoes. Most of the machines are indigenously available & very few of them may be imported. There are plenty of well varieties of potato available for processing. There are few good technologists available, for supplying process technology. There is environmental pollution problem within this industry but can be solved using proper treatment. As a whole the products have fair market demand. There is a good scope for new entrepreneurs. Few Indian Major Players are as under: Tipsy-Topsy Exports Superveg Agrotech Pvt. Ltd. Sifter International Nile Valley Company Rice, Spice and Paper Inc.
Plant capacity: 14400 MT Potato Powder,14400 MT Potato Flakes,6000 MT Potato GranulesPlant & machinery: 12900 Lakhs
Working capital: -T.C.I: Cost of Project : 15800 Lakhs
Return: 44.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

7 AMINOCEPHALOSPORANIC ACID (7 ACA) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

7 ACA or 7 Aminocephalosporanic acid is made from Cephalosporin C and is a key intermediate for synthesizing cephalosporin antibiotics, the B lactam antibiotics family. 7 ACA is a starting compound for the production of various semi-synthetic cephalosporins of different generations. These compounds are made by modification of the side chains at positions 3 and 7 of 7-aminocephalosporanic acid (7 ACA). It is used to produce many cepholosporins pharmaceutical bulks, such as cefazolin sodium, cefotaxime sodium, ceftriaxone sodium, cefoperazone sodium, ceftazime sodium, cefuroxime sodium and so on. Originally, the commercial processes were based on solvent extraction. 7 Aminocephalosporanic acid (7 ACA), until recently it has been produced by chemical deacylation of the natural antibiotic cephalosporin C. The disadvantage of this method is multiple steps, low yield, use of various organic solvents and treatment of a lot of toxic waste. Alternatively, 7 ACA can be produced by a simpler and more environmentally sound process using a bio-catalytic method based on DAAO and glutaryl hydrolase for enzymatic deacylation of CPC to 7 ACA. However, few enzymes capable of this direct deacylation have been discovered, probably because of the unusual nature of the D aminoadipyl side chain of cephalosporin C. Enzyme engineering is a fast growing application in the pharmaceutical market. Cephalosporin is defined as any of a group of broad-spectrum derived from species of fungi of the genus Cephalosporium and is related to the penicillins in both structure and mode of action but relatively penicillinase resistant antibiotics. These antibiotics have low toxicity for the host, considering their broad antibacterial spectrum. They have the active nucleus of beta lactam ring which results in a variety of antibacterial and pharmacologic characteristics when modified mainly by substitution at 3 and 7 positions. Their antibacterial activities result from the inhibition of mucopeptide synthesis in the cell wall. They are widely used to treat gonorrhea, meningitis, pneumococcal, staphylococcal and streptococcal infections. The cephalosporin class of antibiotics is usually divided into generations by their antimicrobial properties. Three generations of cephalosporins are recognized and the fourth has been grouped. Each newer generation of cephalosporins has broader range of activity against gram-negative organisms but a narrower range of activity against gram positive organisms than the preceding generation. The newer agents have much longer half-lives resulting in the decrease of dosing frequency. Accordingly, the third-generation cephalosporins can penetrate into tissues well, and thus antibiotic levels are good in various body fluids. The cephalosporins belong to the family of ? lactam antibiotics. These are named after the reactive moiety of the compounds, the ? lactam ring. In CPC, the four membered ? lactam ring is coupled to a six membered dihydrothiazine ring to form the nucleus, 7 aminocephalosporanic acid (7 ACA), and a side chain, ? aminoadipic acid, is coupled via an amide bond to the nucleus. The total world market for cephalosporins was estimated to be approximately 10 billion US$ in 2000, and ? lactam antibiotics in general accounting for over 65% of the world antibiotic market. According to IMS Health, cephalosporins as single preparation and in combination preparations are ranked 10 in the global drug sales in 2003 by an estimated sales of 8.3 billion US$, the highest ranking for any of the anti infectives classes. The size of the Indian pharmaceutical industry is poised to treble over the decade. It is expected to grow from about USD 6.3 billion in 2005 to about USD 20 billion by 2015, registering a CAGR of 12.3% and outperforming the global average of 9% in 2009 to 10. In terms of scale, the Indian pharmaceutical market is the 14th largest in the world but will graduate to the top 10 by 2015, overtaking Brazil, Mexico, South Korea and Turkey. India’s growth to a USD 20 billion market by 2015 indicates that the incremental growth of USD 14 billion over the coming decade is likely to be the third highest in the world. Demand for 7 ACA is principally determined by the market sales scale of downstream products. In terms of developing trend, ceftriaxone and cefazolin were two mainstream products of 7 ACA. Therefore, the market change in these two products directly affected the change in production-sales relations of 7 ACA. After dosage conversion, according to estimate the use of 7 ACA for making certriaxone accounted for 47.7% of the total consumption of 7 ACA. Obviously, ceftriaxone had become the biggest consumer of cephalosporins raw materials of 7 ACA series, followed by cefazolin. Not only ceftriaxone boosted morale, but cefotaxime, cefazolin sodium, cefoperazone sodium, cefoperazone sulbactam, ceftazidime, cefuroxime, etc were also the direct contributors of the family. At present, major players in the market include Shijiazhuang Pharmaceutical Group Co. Ltd., Fujian Fukang Pharmaceutical Group Co. Ltd., Shanxi Weiqida Pharmaceutical Group Co. Ltd. and Zhuhai United Labs Co. Ltd. At present there is no production of 7 ACA in the country and the demand is met by imports. There is a good scope for capacity creation in India. New entrepreneurs should venture into this sector.
Plant capacity: 150 MT/AnnumPlant & machinery: 1486 Lakhs
Working capital: -T.C.I: Cost of Project : 2167 Lakhs
Return: 64.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

ACTIVATED CARBON FROM BAMBOO - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Activated carbon is a non graphite form of carbon and is micro crystalline in nature. It is extensively used in various industries as a very good adsorbent for odour or colour. There are two varieties of activated carbon viz gas phase or the liquid phase adsorbents. The liquid phase activated carbon is usually powder or granular form where as the gas phase adsorbent is hard granules like dust free pellets. Besides the liquid phase and gas phase classification of activated carbon, into grades based on the chemical properties it possesses such as its methylene blue (MB) value, surface area, ash content, iron content, pH factor and adsorption quality of carbon. The term activated carbon, active carbon, or active charcoal is usually applied to amorphous carbons possessing higher adsorption capacity their wood or animal charcoal. Many carbon of industrial value are prepared from coal and from organic vegetable and animal matter. The resulting amorphous products include Charcoal coke, and petroleum coke. Carbon as such is probably, the most widely distributed element in nature. It occurs in two allotropic crystalline forms, viz, graphite (hexagonal system) and diamond (isomeric system), The former is soft and weak while diamond is hard and transparent. A large variety of raw materials are available for the manufacture of these products Coal, petroleum coke, and wood charcoal are activated by gas activation. Paddy and groundnut husk, saw dust, bagasse molasses, straw, tree bark, bagasse, cocoa bean, shells, bamboo, distillery slop, waste mahua flowers and various industrial wastes have been utilized for the production of active carbons by chemical activation. Small quantities of activated carbons have been manufactured indigenously on commercial scale from paddy husk, bagasse and filter press mud particularly for use in the refining of gur. Many carbonaceous materials such as petroleum, coke, saw dust, lignite, coal, peat, wood charcoal, nutshells, and fruit pits may be used for the manufacture of activated carbon, but the properties of the finished material are governed not only by the raw material but by the method of activation used. Activated carbons form two main classes, those used for adsorption of gases and vapors, for which a granular material is generally employed and those used in purification of liquid for which a powdered material is desired. Due to the expansion of pharmaceutical and vegetable oil industry the demand of activated carbon is expected to rise sharply in the coming years. Apart from demand in Indian market, there is also huge demand of activated carbon in foreign market for the high quality activated carbon. It is very clear that there exists very good scope for this product and it can be exploited easily. Few Indian Major Players are as under: Indo German Carbons Ltd. Ion Exchange (India) Ltd. Triton Laboratories Ltd. Cost Estimation: Capacity : 1500 Ton/Annum Composition of Batch Mix, it’s a Batch process, one feed 5 Tons finished product will required
Plant capacity: 1500 Ton/AnnumPlant & machinery: 82 Lakhs
Working capital: -T.C.I: 313 Lakhs
Return: 44.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

ALUMINIUM EXTRUSION - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The aluminium industry can be categorized into two principal segments. The key segment is the production of primary aluminium by integrated producers engaged in the entire value chain from the mining of bauxite in an alumina refinery, and conversion of alumina into primary aluminium metal in an aluminium smelter. Primary aluminium is made commercially available in the form of ingots, billets, wire rods or properzi rods (also called conductor redraw rods). The second principal segment consists of secondary/downstream producers who are engaged in the manufacture of value-added semi fabricated aluminium products such as rolled products, extrusions and foils. The extrusions segment is the preserve of the secondary producers with nearly 40 players, such as Jindal Aluminium, Century Aluminium, Sudal Industries, Bihar Extrusions and Bhoruka Aluminium, with a production capacity of 1.42 lakh tonnes who account for over 80 per cent of the aggregate production capacity of 1.74 lakh tonnes. Primary aluminium producers such as Indal, Hindalco, Balco and Malco account for the remaining 32,000 tonnes of production capacity. Aluminium is the second most abundant metallic element in the earth’s crust after silicon, yet it is a comparatively new industrial metal that has been produced in commercial quantities for just over 100 year. It weighs about one third as much as steel or copper; is malleable, ductile, and easily machined and cast; and has excellent corrosion resistance and durability. Some of the major uses for aluminium are in transportation (automobiles, airplanes, trucks, railcars, marine vessels, etc.), packaging (cans, foil, etc.), construction (windows, doors, siding, etc), consumer durables (appliances, cooking utensils, etc.), electrical transmission lines, machinery, and many other applications. Aluminium is leading the way of the future of the construction industry. There is a very good scope for new entrepreneurs to venture into this sector. Few Indian Major Players are as under: Jiangsu Atlas Aluminum Industry Co., Ltd. Jin Fulai Aluminium Factory Ao Jin Aluminium Products Co., Ltd. Fit Precision Mold Co., Ltd. Hao Mei Aluminium Co. Ltd. Prags Development Co., Ltd. Silver 100 Aluminium (Guangdong) Limited Weifang Jingda Plastic Machinery Co. Ltd. Dalian Golden Engineering Co., Ltd. Fujian Nanping Aluminium Co., Ltd. J B Components Ltd. Jiangyin Mingding Aluminum Products Co., Sichuan Hua Heng Xiang Metal Science And Technology C0.,Ltd James Scraps
Plant capacity: 25000 MT/AnnumPlant & machinery: 280 Lakhs
Working capital: -T.C.I: Cost of Project : 2815 Lakhs
Return: 41.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 16 of 264 | Total 2637 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 263 264   Next »


Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top