Google Search

Project Search

Already a Member ?

Power Project, Power Generation Plants, Hydro electric Power, Gas-Fired Power Station,Coal,Thermal,Water,Hydro,Wind,Solar,Agro,Biogas Based Power Plants,Electrical Power Industry, Alternative,Renewable Power Generation,Electricity Generation Projects

India possesses one of the largest power generation capacities in the world (its current ranking is fifth) with an installed capacity of 156,000 MW which is about 4 percent of global power generation. The top four countries, viz., US, Japan, China and Russia together consume about 49 percent of the total power generated globally. The average per capita consumption of electricity in India is estimated to be 704kWh during 2008-09. The power sector has emerged as major focus area for the government both central and state. However, it suffers from power shortages estimated at 14-15 per cent, with the figure higher in the northern and western regions.  

India's generation capacity of 2,300 MW in 1950 expanded to over 116,500 MW including non-utilities at the end 2000-01. The total installed capacity of electric power generation further increased to 141,080 MW in 2007-08 (upto January 2008) compared to a capacity of 128,000 MW during the same period in 2006-07. The Eleventh Plan has targeted a capacity addition of 78,570 MW. The five years (2007-2012) may be the best of times for power equipment makers with the power sector on an expansion spree. With order-book growth expanding over the last three years, there is a good chance that this will continue. Close to 82% of the planned generation capacity for the Tenth Plan was either implemented or was in the process of being implemented. Even assuming a 70% implementation ratio for the Eleventh Plan, close to 55,000 MW will be added. Five ultra mega power projects, totaling 20,000 MW are coming up in 2008. In the transmission sector, for example, Power Grid Corporation is planning a capex of Rs 710 billion by 2010.

Earlier, the shortfalls in achieving the Plan targets of addition to power generation and up-gradation of transmission and distribution had adversely affected the electrical equipment industry. The peak shortage which was over 11% of the requirement in 2003-04 increased to 11.7% in 2004-05 and to over 12% in 2005-06. The shortage further rose to about 14% in 2006-07. In the ten months of 2007-08 the peak shortage had risen to over 15% of the peak demand of 107,010 MW.

The national grid envisage 200,000 MW transmission capacity and 37,700 MW of inter-regional power transfer capacity (current inter-regional power transfer capacity is 20,750 MW) to ensure smooth transfer of power from power –surplus to power-deficit regions.

According to the Power Ministry, the power sector has tied up Rs 2,240 billion worth of investments to build power plants with 70,000 MW capacities in the next three years. The Indian government has set ambitious goals in the 11th plan for power sector owing to which the power sector is poised for significant expansion. In order to provide availability of over 1000 units of per capita electricity by year 2012, it has been estimated that need-based capacity addition of more than 100,000 MW would be required. This has resulted in massive addition plans being proposed in the sub-sectors of Generation Transmission and Distribution. Investment is also expected to flow into different segments of the value chain, covering the segments of power generation, transmission and distribution and allied sectors such as equipment, technology and services. The private sector is expected to play a more active role in investment and capital productivity. The government has undertaken a number of initiatives to facilitate private sector participation.

With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Download List Download as Project List

Page 1 of 1 | Total 27 projects in this category

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

NameCapacityCost *Return %
Power Plant (Hydro based)-0.0015.80
Solar Power Plant-0.000.00
Porcelain Insulator-0.0028.88
Sponge Iron With Captive Power Plant (Agro Based)-0.0037.49
Power Plant (Hydro based) Cap: 10 MW-0.0015.80
Power Plant (Agro Based)-0.0031.51
Biogas Power Plant From Cow dung1 MW0.0032.00
Biogas Power Plant-0.0029.31
POWER PLANT (GAS BASED) 0.000.00
DIESEL GENERATING SET (5 KVA TO 250 KVA) 0.000.00
Power plant based on biomass gasification 0.000.00
Power plant based on windmill 0.000.00
RCC(Reinforment Concrete Cement) Poles-0.000.00
RCC(Reinforced Concrete Cement) Poles-0.000.00
CO-GENERATION PLANT BAGASSE BASED (POWER PLANT)-0.000.00
Captive Power Plant -0.000.00
Power Generation from Biomass-0.000.00
Biogas power plant-0.000.00
Bio-mass (Rice Husk) based Cogeneration project-0.000.00
CAPTIVE POWER PLANT USING RICE HUSK AND COAL (CONVERTIBLE)-0.000.00
TRANSMISSION GALVANIZED TOWER-0.000.00
CALCINATION PLANT FOR PYROPHYLLITE AND DISPORE MINERALS BY VERTICAL SHAFT KLIN PROCESS-0.000.00
CALCINATION PLANT FOR PYROPHYLLITE AND DISPORE MINERALS BY VERTICAL SHAFT KILN PROCESS-0.000.00
POWER PLANT COAL BASED-0.000.00
Electricity from Cow Dung-0.000.00
Power Generation using Pumped Storage Hydro Power System (Pumped Storage Hydro-Power plant)-0.000.00
Power Generation from Steam Turbine- Detailed Project Report, Business Plan for Manufacturing Plant-0.000.00

Information
  • Cost is in Indian Rupee INR '00,000 (hundred thousand/Lakhs)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 1 of 1 | Total 27 projects in this category

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top