Google Search

Project Search

Already a Member ?

Plastics, Polymers and Resins, Polypropylene (PP), Polystyrene (PS), Acrylonitrile butadiene styrene (ABS), Polyethylene terephthalate (PET), Polyester, PA, Poly(vinyl chloride) (PVC), Polyurethanes (PU), Polycarbonate (PC), Polyethylene (PE) Projects

Plastics have revolutionized our lives, creeping into every nook and corner of our homes and offices. However, India’s per capita consumption of plastics is still 6 kg compared to 25 kg in developed countries. Consumer plastics mainly comprise polymers such as polypropylene, high and low density polyethylene, and vinyl chloride. Broadly plastics can be classified into two types namely Thermosetting and Thermoplastic. The type of plastics includes HDPE, LDPE, PVC, PP, PS, PETE and vinyl plastics, to name a few.

The plastics industry is highly fragmented. There are about 22,000 plastic processing units, of which three-fourth are in the small –scale sector, which also accounts for a quarter of the total polymer consumption. About 30 per cent of the total polymer consumption accounts for recycled plastic. Plastics have a high volume –to-weight ratio, which makes their collection and transport a major cost factor.

The Indian plastics industry has been growing at a phenomenal rate of 15 per cent over the years. Thus its potential is being utilized properly. The boost in the plastics industry is due to the rapid growth of segments like electronics, packaging, healthcare, consumer durables and telecommunication sectors.Annually around six million tonnes of plastic is produced in the country, with the plastic packaging sector growing fastest.

Reliance Industries Ltd., Gas Authority of India and petrochemicals are major producers of polymers in India. RIL, Asia’s largest manufacturer of polypropylene with a combined capacity of over one million tonnes, holds 70 per cent market share.

India will be the third largest plastics consumer after the US and China by 2010 at over 12 million.Plastic goods consumption is expected to double in the next three years.  Experts have predicted that India’s market for finished plastic goods will reach $300 billion by 2012, while exports are expected to reach a level of $200 billion in the same period. India ranks highest in recycling of plastics with 60 per cent of plastic recycled compared with a world average of 20 per cent. Experts have estimated thatthe basic demand for plastic would be boosted over the next years by the housing, automobile and retail sectors.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Download List Download as Project List

Page 3 of 6 | Total 527 projects in this category
« Previous   Page 1 2 3 4 5 6   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

NameCapacityCost *Return %
Polyester Resin600 Tons/Year0.0060.00
PVC Resins600 MT PVC Resin/Year0.0043.47
PVC (Flexible) Pipe180,000 Kgs/Year0.0039.00
PVC Fittings-0.000.00
PVC Foot Wear-0.000.00
Plastic Packaging material for Ghee and Milk-0.000.00
Plastic Polypropylene Sutli150 Tons/Year0.0054.00
Plastic collapsible Tubes-0.000.00
Polyester & Plastic Film Capacitors-0.000.00
Plastic Bottles Used in Medicines (Small Sizes)-0.000.00
Plastic Buckets & Doli-0.0055.21
PVC Profile -0.000.00
PVC Asbestos Floor Tiles-0.000.00
PVC Resin Based Granules-0.000.00
PVC Spare Parts-0.000.00
Plastic Clip for Ladies-0.000.00
Plastic Buttons39,00,000 gross of acrylic buttons/Year0.0029.81
PVC Granules by Chemical Process-0.000.00
PVC Bottles Packaging for Use in Hair Oil-0.000.00
PVC Drinking Straw-0.000.00
Polyurethane Cycle Seats-0.000.00
Plastic Ampules used for Distilled Water-0.000.00
PVC Granules, Film & Printed Bags-0.000.00
PVC Films6,00,000 Kgs of PVC Film/Year0.0030.89
Polyurethane Foam300 MT Foam/Year0.0058.68
PVC Wire & Cables12,000 Coils/Month0.0037.00
Photo Polymer Emulsion-0.000.00
PVC Cables & Twin Flex Cable (T V Antenna Cables)1)12,000 Coils of PVC Cable (100 Mts Each) 12,500 Coils of Twin (20, Mts. Flex Cable Each)/Month0.0037.00
PVC Cables & Twin Flex Cables/Cable Wire2000 Kgs PVC Cables/Day0.0026.28
PVC Granules (Granules & Footwears)-0.000.00
PVC Compounding from Plastic Waste-0.000.00
PVC Compounds from PVC Resins (PVC Granules)-0.000.00
Plastic Bottles & Caps5000 Pieces x 20 gm wt. Bottles with Cap; 5000 Pieces x 50 gm wt. Bottles with Cap; 5000 Pieces x 100 gm wt. 500 Pieces x 200 gm.wt Bottles with Cap/Year0.0044.00
Plastic Drinking Straw (PVC)-0.000.00
Plastic Industry-0.000.00
Plastic Processing Moulds400 Sets of Ready Plastic Moulds/Year0.0034.31
Plastic Sutli-0.000.00
Plastic Tarpauline-0.000.00
PVC Conduit Pipes-0.000.00
Plastic Moulded Toys-0.000.00
Plastic Moulded Articles (Using Agro Waste as Fillers)84000 Kg of Various injection Moulded articles/Year0.0044.00
Plastic Corrugated Sheets2,25,000 Kgs of Plastic Corrugated Sheets/Year0.0050.32
Plastic Cone-0.000.00
Polyurethane Sole Manufacture1,80,000 Pcs./Year0.0037.78
PVC Roofing Sheets-0.000.00
Polyurethane In-situ Insulation120 MT of Polyurethane Rigid Foam as used for In-situ Insulation0.0026.03
Polyurethane Foam & Its Products90,000 kgs of Flexible Foam inform of Various Mould Sizes 60,000 Kgs of Rigid Foam of Diff Sizes & Shapes0.0051.85
Plastic Buttons39,00,000 Gross of Acrylic Button 15,00,000 Gross of Urea Formaldehyde Button/Year0.0029.81
Plastic Flash Light Torches-0.000.00
Recycling Of Polythene5 MT/day0.0065.40
Recovery of Nylon from Nylon Waste-0.000.00
Rubberized PVC Gasket-0.000.00
Rigid Polyurethane Foam800 Tons/Year0.0046.90
Rubber Lining and FRP Lining in Acid Storage Tanks-0.000.00
Rubberised PVC Gasket300,000 Kgs Rubberised PVC Gaskets/Year0.0039.00
Solution Polymerization of Methyl Methacrylate200 Kgs/(Batch)/Day0.0026.40
Spectacle Frames (Plastic)-0.000.00
Spectacle Frames (Plastic)-0.000.00
Spirit Soluble Maleic Resin30 Tons/Day0.0061.00
Sterilized Disposable Plastic Syringes(a) 1,00,800 Doz. 5cc Capacity Syringes (b) 50,400 Doz 2cc Syringes (c) 12,600 Doz 1 cc Syringes/Annum0.000.00
Tar Plastics-0.000.00
Thermocole Sheets (Expanded Polystyrene Sheet) 0.000.00
Unplasticised PVC Pipe12.5 MT/Month0.0023.80
Urea Formaldehyde Resin1 MT/Day0.0043.00
Urea Formaldehyde Moulding Powder600 MT/Annum0.0045.00
Vinyl Asbestos and PVC Wall paper25,00,000 Sq. m Vinyl Absestos0.000.00
Vinyl Absestos Flooring & PVC Wall Paper(a) 20,00,000 sqm Vinyl Absestos Flooring (b)10,00,000 sqm PVC Wall Paper0.0035.38
Valve for Disposable Plastic Gas Lighter13125 Dozens Disposable Plastic Gas Lighter/Shift/0.000.00
Water Storage Tanks (HDPE) (Sintex Type)500 litre 7200 Tanks (HDPE)0.0024.00
Acrylic Yarn Dyeing-0.000.00
Acrylic Blanket For Human Warming-0.0046.65
Acrylic Garments-0.000.00
HDPE/PP Woven Sacks Using Circular looms15,00,000 Bags/Year0.0050.00
Nylon Socks-0.000.00
Nylon Band-0.000.00
Nylon Under Garments (Underwears and Panties)-0.000.00
Printed & Plain HDPE/PP Woven Sacks using Circular Looms-0.000.00
Scouring Agent for Nylon-0.000.00
Twisted Yarn (Nylon)42,000 Kgs of Twisted Yarn/Year0.0049.50
Disposable Plastic Syringes10000 NOS/day0.0025.16
HDPE Corrugated Pipe 0.000.00
Non Plastic Clay Calcination Plant 0.000.00
Poly Acrylic Acid 0.000.00
Polyester Master Used for Mini Offset Printing Machines 0.000.00
Plastic Files & Its Smaller Components 0.000.00
Bottled Drinking Water With Pet Bottles Manufacturing -0.000.00
Blood Bags 0.000.00
PVC INDUSTRIAL PRODUCTS (INJECTION MOULDED) 0.000.00
EXPANDED CELLULAR POLYETHYLENE SHEET 0.000.00
BLENDING OF PUFF POLYOL AND PUFF SANDWITCH PANELS 0.000.00
MELAMINE CROCKERY -0.000.00
PLASTAZOTE POLYETHYLENE FOAM USED FOR FIBRE CABLE JOINT 0.000.00
PET GRANULES/DANA 0.000.00
NYLON NET FOR GIVING SHADE TO TEA PLANT IN NURSERY 0.000.00
PLASTIC TUBES AND HDPE FABRIC 0.000.00
SPOONS (PLASTIC) 0.000.00
PHENOLIC RESIN INTENDED FOR THE MANUFACTURE OF FLOWER TYPE FOAM (FOAM FOR HOLDING FLOWERS) 0.000.00
FIBRE GLASS WIRE 0.000.00
POLYESTER RESIN FOR WIRE ENAMEL 0.000.00
NYLON GRANULES FROM NYLON WASTE 0.000.00

Information
  • Cost is in Indian Rupee INR '00,000 (hundred thousand/Lakhs)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 3 of 6 | Total 527 projects in this category
« Previous   Page 1 2 3 4 5 6   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top