Google Search

Search

Already a Member ?

Power, Energy generation, Distribution, Production and related Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 5 of 5 | Total 44 projects in this category
« Previous   Page 1 2 3 4 5   »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Solar Water Heater

Solar water heater is a device that can be used to capture sunlight in order to heat the water in your pipes to be used for baths, showers, etc. Solar water heater or SWH comprises a solar panel, inverter system, and a water storage tank. The sunlight that falls on the solar panels is used to heat the water inside the insulated storage tank either through a pump or directly through the thermosyphon principle. In the thermosyphon principle, fluid circulation is based on natural convention, where warm water rises and is replaced by cold water. Some of the advantages of SWHs over CWHs are: cost-effectiveness and reduced dependence on other fossil fuels. SWHs are generally installed on the roof of a building where the intensity of sunlight is maximum throughout the day. The market for solar water heaters in India is expected to reach INR 1369 crore till 2021. Karnataka and Bangalore are having maximum share in India. In India the SWH market has been through many ups and downs. The market changes drastically in some year, remains stable for a while and then again decreases as shown in the below graph. In solar water heaters the residential sector is driving the market. Residential sector has penetrated almost 80% in the market. Industries and other commercial institutes are also picking up solar water heater as a better option. Electric water heaters are still dominating the market, but solar water heater is also growing rapidly to make a considerate share in the water heater market. Global Solar Water Heater Market is projected to exceed USD 4 billion by 2024, growing demand for environment friendly, cost effective and reliable systems for water heating purposes across commercial, industrial, and residential sector will augment the solar water heater market. Ability to reduce electricity bill by 50% to 80% will encourage the product penetration over the forecast timeline.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Captive Thermal Power Plant for Glass Industry

A captive power plant also called auto producer or embedded generation is a power generation facility used and managed by an industrial or commercial energy user for their own energy consumption. Captive power plants can operate off-grid or they can be connected to the electric grid to exchange excess generation. A captive power plant is a facility that is dedicated to providing a localised source of power to an energy user. These are typically industrial facilities or large offices. The plants may operate in grid parallel mode with the ability to export surplus power to the local electricity distribution network. Alternatively they may have the ability to operate in island mode; i.e. independently of the local electricity distribution system. Benefits • Security of power supply through self-generation • Reduced costs through high fuel efficiency, particularly when in CHP configuration • Improved environmental performance resulting from fuel efficiency Though the power generation industry is well established in most countries, limitations of providing good-quality power, round the clock to the industrial users, force industries to establish captive power plants. Generally, factories are established near the sourcing point of raw materials or mines; not always there is a power plant in the vicinity. If the distance is more then, the cost of transmission has to be borne by the user, along with added expenses due to the technical loss during transmission. Global captive power generation market is expected to grow due to the mushrooming power demand in emerging markets of China, India, and Middle East along with the presence of cross subsidized charge to the per unit power generation cost. Increasing population, industrialization, and urbanization is expected to augment captive power generation market growth. The advantages of captive power generation include reduced distribution and transmission losses, and higher thermal efficiency. Increasing demand for uninterrupted and reliable power is expected to have a positive impact on captive power generation market over the next seven years. These factors have made the captive power plant a popular choice for the industry developers. Since the industrial sector is one of the largest power consuming markets, this sector is likely to contribute to the growth of the captive power generation market over the next five years. Moreover, it is expected to hold a dominating market position during 2018-2023.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Porcelain Insulators

An electrical insulator is a material whose internal electric charges do not flow freely, and therefore make it nearly impossible to conduct an electric current under the influence of an electric field. This contrasts with other materials, semiconductors and conductors, which conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors. Low-tension insulators are used for A.C. & D.C. power supplies of not more than 600 volts. Low tensions insulators are manufactured in both glazed and unglazed insulators are quite satisfactory. Insulators required for use in humid atmosphere are invariably glazed. Glazed insulators are used in lighting arrestors in radio receivers, telephone and utility outfits and neon signs. Some L.T. insulators like nail knobs, tubes & cleats are glazed on one side. Voltage above 1000 Volts is generally considered as high tension for long distance Electric power transmission; high voltage is essential because it reduces the cross/section and, therefore, the weight of the conductor required. Porcelain insulators are suitable for high tension transmission & distribution are required to be effective at high voltages and under extreme climate conditions of rain, snow, high wind of soaring heat. The global Porcelain Insulators Market has grown significantly over the past few years and is anticipated to expand at a rapid pace till 2026. This market study provides an in-depth assessment on market size and year on year growth of global Porcelain Insulators Market in terms of revenue, various levels of in-depth market segmentation, market dynamics which comprises of the demand side, supply-side and economy side drivers, market restraints, challenges and opportunities and trends which are prevailing in this market and impacting the growth of the market. Worldwide Porcelain Insulators Market highlights its existing absolute $ opportunity. Further, this market is likely to achieve considerable absolute $ opportunity by the year 2026 as compared to the value achieved in the year 2018. Growing investments toward the expansion of Transmission & Distribution (T&D) infrastructure to support the ongoing large-scale renewable power integration will propel the high voltage porcelain insulators market growth. Rising focus of utilities toward strengthening and modernization of grid networks along with introduction of ambitious renewable integration target of governments will further complement the industry landscape. Surging investments toward the refurbishment and replacement of aging electrical infrastructure across the developed economies coupled with the growing adoption of smart grid technologies will drive the porcelain insulators market growth. As per the U.S. Energy Information Administration (EIA), in 2017, major utilities across the country had invested over USD 50 billion toward expansion and strengthening of nation’s distribution networks. An electrical insulator is a material whose internal electric charges do not flow freely, and therefore make it nearly impossible to conduct an electric current under the influence of an electric field. This contrasts with other materials, semiconductors and conductors, which conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors Few Indian major players are as under Meister International National Switchgears ZPE ZAPEL Aditya Birla Insulators Power-grid Switchgears PPC Insulators Yigang Precision Ceramics
Plant capacity: Porcelain Insulators:500.0 MT / dayPlant & machinery: 695 lakhs
Working capital: -T.C.I: Cost of Project:Rs 2804 lakhs
Return: 29.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Start your own business in Porcelain Insulators. Most Profitable Opportunities for Startups.

Start your own business in Porcelain Insulators. Most Profitable Opportunities for Startups. An electrical insulator could be a material within which the electron doesn't flow freely or the atom of the insulator have tightly bound electrons whose internal electric charges don't flow freely; little electric current can flow through it underneath the influence of an electric field. This contrasts with different materials, semiconductors and conductors that conduct electric current a lot of easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors. The foremost common examples are non-metals. Related Projects: - Electrical, Electronic Industries and Power Projects Insulators are utilized in electrical equipment to support and separate electrical conductors while not permitting current through themselves. An insulating material utilized in bulk to wrap electrical cables or different instrumentation is named insulation. The term insulator is additionally used a lot of specifically to refer to insulating supports used to attach electric power distribution or transmission lines to utility poles and transmission towers. They support the load of the suspended wires while not permitting this to flow through the tower to ground. When a material's electrons have very little freedom to maneuver from atom to atom, the material functions as an electrical insulator. Samples of this include glass, rubber, plastic and air – the previous 3 of which are often utilized in electronic equipment and wiring. Rubber, specifically, is usually used as a wearable insulator to shield electricians and alternative specialists from shocks that would be dangerous or deadly while not protection. At an equivalent time, plastic is used within the coating of power cables to confirm that electricity flows solely from the ability source to your electric devices. In power generation, electric cables are protected from the metal of the towers that carry them with large glass insulators. Related Projects: - Renewable Energy Sector Porcelain insulators are suitable for high tension furthermore as low tension transmission & distribution are needed to be effective at high voltages and underneath extreme climate conditions of rain snow, high wind of soaring heat. The foremost common in use are suspension kind and pin type. The top kind material is used on all distribution lines and on low voltage transmission lines. The most advantage of the pin kind insulator is that it's the cheaper insulator. The foremost usual material for outdoor insulators is porcelain, though toughened glass has recently been developed. USE OF INSULATORS ? Pin insulators are used in transmission up to 33 kv system. ? Solid post insulators is used for substation requirements. ? Suspension insulators are also used in transmission above 33 kv. ? Hollow insulators are used for making of circuit breakers, Current transformers, Potential transformers, Bushings, Lightning arrestors. PROCESS OF MANUFACTURING Main raw materials like china clay, ball clay, quartz, feldspar, plastic fire clay are used for the preparation of body. Materials like whiting, barium carbonate, zinc oxide etc. are used for the preparation of glazes. The non-plastic raw materials are ground in ball mill to the fineness of 100-120 number mesh and water is added in desired proportion. China clay and other soft clays with 0- 40% water are blunted in the blunter and sieved through 120 No. mesh and then passed through electromagnet in order to remove the iron particles. Books:- BOOKS & DATABASES Both slurries are mixed proportionately in the agitator tank. The slurry from the agitator tank is passed through filter press for dewatering to make cakes. L.T. Insulators like pin, shackles etc. are made by pressing or throwing process followed by turning on leather hardening. For making the electrical pressed porcelain items, the cakes are dried and powdered in a disintegrator. Dry broken green articles are also mixed with this body with approx. 6% water and 3% oil is mixed to form consistent and uniform granules. The prepared mass is again passed through a sieve granulator, so that any lump formed during mixing is broken to form granules. The mass is then pressed into shapes in a pillar press/toggle press fitted with dies of desired shapes. The articles are then dried and finished. The articles are glazed, if required and then fired at the temperature of about 1280oC in a shuttle kiln. The articles are taken out from the kiln are sorted and packed for selling. TYPES OF INSULATORS:- 1) Pin insulators. 2) Solid post insulators. 3) Suspension insulators. 4) Hollow insulators. 5) Long rod single piece porcelain insulators. MARKET OUTLOOK Factors similar to increase in infrastructural investment in various countries followed by favorable government regulations fuel the demand for the worldwide insulator market. To boot, ceramic insulators are mainly most popular over its glass counterparts as they possess advantages like a lot of proof against external harm from installation & shipping and deliver higher performance in wet conditions. Additionally, it also has high thermal shock resistance. Of these factors are expected to boost the growth of the market throughout the forecast period from 2019 to 2026. However, increase in incidence of pollution flashover accident is expected to hamper the market growth. However, shift in consumer preference toward composite insulator because of its better performance compared to insulators, is another factor that hampers the growth of the market. Further, on the opposite hand, rise in investments in numerous developing countries serves as an opportunity for the market. Related Videos: - Electrical, Electronic Industries and Power Projects Increasing investments toward the modernization of aging grid infrastructure along with fast urbanization can drive the India electrical insulators market. Rising investments for the growth of electric networks along with investment targets supporting the whole price chain of power transmission, generation, and distribution can further propel the trade dynamics. India transformers electric insulators market will witness growth on account of escalating electric infrastructure spending coupled the ongoing industrial expansions being carried out in the country. Increasing investments made by government authorities for the reduction of transmission losses will further complement the industry growth. INCREASING DEMAND FOR CERAMIC/PORCELAIN TYPE INSULATORS The Ceramic/porcelain type is expected to dominate the electric insulator market in 2019. Electrical insulators made of ceramic are primarily used in high voltage insulating systems. Furthermore, these insulators can be custom manufactured to be applied in high-temperature resistors. The ceramic insulators usually have a higher dielectric constant, which does not vary much with varying temperature, unlike glass, which conducts more electricity at elevated temperatures, i.e., the dielectric constant of glass varies with temperature. The demand for ceramic electrical insulators is expected to be driven by the expanding transmission and distribution network, supported by growing energy consumption, penetration of renewables in the global energy mix, among various other factors. It is expected that by 2022, the renewable energy capacity growth would be as high as 90%, out of which a significant fraction is likely to come from big utility-scale projects, which, in turn is a positive indicator for the transmission and distribution market, and consequently a bright market outlook for the ceramic electric insulators in the coming years. ASIA PACIFIC: THE FASTEST GROWING MARKET FOR ELECTRIC INSULATOR MARKET The Asia Pacific is estimated to be the fastest growing market for electric insulator market in 2023 and is projected to grow at the highest CAGR during the forecast period. Increase in population, urbanization, and the growth of the industrial sector have increased the demand for power in countries such as China and India. The government of Asia Pacific countries is planning to develop more electrical grid and power generation capacity, which would further boost the demand for insulator in the region. Therefore, increasing demand for power and up gradation of existing electrical infrastructure is expected to boost the electric insulator demand in the region. KEY PLAYERS Meister International National Switchgears ZPE ZAPEL Power-grid Switchgears PPC Insulators Yigang Precision Ceramics ABB Ltd. (Switzerland), Aditya Birla Nuvo Ltd. (India), General Electric, Siemens AG (Germany), Tags:- #porcelaininsulators #porcelaininsulator #electricinsulators #insulator #insulators #porcelain #ceramicinsulator #ceramicinsulators #porcelainbox #GlassInsulators #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #industrialproject #entrepreneurindia #startupbusiness #startupbusinessideas #businessestostart #startupideas #BusinessFeasibilityStudies #technologyindustry #feasibilityReport
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 5 of 5 | Total 44 projects in this category
« Previous   Page 1 2 3 4 5   »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top