Google Search

Search

Already a Member ?

Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Drug Intermediates, Speciality Chemicals, Raw Materials, Fine and Specialty Chemicals Intermediates, Pharmaceutical Bulk Drugs

Indian drugs and pharmaceutical industry has advanced perceptibly and is getting ready  for the new patent regime and  to withstand global competition, which is expected to be unleashed by new winds of liberalisation - a new era of liberalisation - much different from what was ushered in since the conclusion of the Uruguay Round and the establishment of the World Trade Organisation.

The industry has been expanding at annual rates ranging between 8 to 10% (against global growth rate of 6%).  According to a study  by McKinsey, Vision 2010, the domestic pharmaceutical industry could attain a size of  $25 billion (Rs 1200 billion) by 2010 by focusing on two areas: first, innovation-led research, development and new drug discoveries; and second, information technology-led remote sales and marketing.  The market for bulk drugs and formulations had increased from about Rs 103  billion in 1990-91 to an estimated Rs 435  billion at the end of 2003-04.  The prices of Indian essential drugs are among the lowest in the world. Apart from strides made by the industry in the last half-a-century, lower production cost due to reverse engineering and low R&D outlays has been a major factor in keeping the prices under check.

The global pharmaceutical industry is estimated at $ 300 billion, not all representing cross-border trade.  India's measly share of $ 1.5 billion in global trade represents an untapped potential. Under the regime of economic liberalisation underway since early 1990s, the drugs and pharmaceutical sector witnessed initiatives at fresh investment in the sector. Nearly 1735 investment proposals of the order of around Rs 166  billion were initiated. The foreign collaboration proposals approved numbered around 425 with a foreign direct investment  (FDI) component of over Rs 25 billion. The pharmaceuticals have figured high on the export front. In 2001-02,  the sector was  estimated to have registered a growth of 17.6% at around Rs 20.3 billion.

In the wake of economic liberalisation, many a  overseas players  returned or contemplated returning to India. These include Ivox Corp (USA),  Taro Pharmaceuticals (Israel) and Merck (USA). These are out either to set shop or looking for acquisitions in India. Hexal AG of Germany has established a liaison office in India. MILLIONCs like Rocha, Bayer, Aventis and Chiron are making India a regional hub for bulk drugs. 

The Export Import Bank of India (Exim Bank) had  doubled its corpus for the pharmaceutical industry to Rs 2 billion as a result of increased activity in the industry, especially in the external sector. The fund is used for the development and commercialisation of the new products and applications, significant improvement in the existing design of  products, setting up and expansion of pilot plants, research studies for obtaining regulatory approvals, cost of filing and managing international patent and R&D Centres.

It needs, however, to be recognised that the presence  of small scale manufacturers has resulted, on the one hand,  in a highly fragmented industry, and on the other, it has made it possible to supply a near 100,000 drugs including vitamins, antibiotics, antibacterials, cardio-vascular and other essential drugs. These account for nearly 37% of the market.  While each of about 80% of the manufacturers has annual sales below a billion rupees, top ten companies are known to control over 30% of the market. At present there are more than 20,000 players in the country.

The major players are: Alembic Chem, Aurobindo Pharma, Cipla, Dr. Reddy's, FDC, IPCA Labs, Jagsonpal Pharma, J.B. Chemicals, Kopran, Lupin Labs, Lyka Labs, Morepan Labs, Nicholas Piramal, Ranbaxy Labs, Sun Pharma, Themis Medicare, GlaxoSmithkline, Astrazeneca, Aventis, E-Merck, Torrent Pharma, TTK Healthcare, Unichem Labs,  Wockhardt  and  Zandu Pharma.  Until recently, only a few of the Indian companies had gone into any serious R&D activity. Much of the effort was directed to affordable analogue research. The R&D level in the country is low with even well-placed pharma companies spending less than 2% of turnover on R&D. MILLIONCs are known to contribute as much as 10% or more of their turnover to R&D.  While India is very strong in process chemistry, biology and applied bio-chemistry, initiatives at all levels - government, academia, private sector - involving heavy financial outlays, are called for.

Ayurveda continues to remain a preferred system of medicine for a vast segment of population in the country. The country has over 400,000 registered practitioners of the Indian system of medicine. Around 170 institutes properly affiliated to various universities impart under- or post-graduate courses each year. These institutes churn out some 5,500 fresh practitioners. The practitioners are supported by 12,000 dispensaries and 2,100 beds available for ayurveda treatment countrywide. The emerging biotechnology sector has already taken by storm and is offering sops to states to make these as the thriving ground for the highly potential segment in medicare.

How to Prepare Project Report on Pharmaceutical Processing Industry?

Drug manufacturing companies work under strict laws and regulations. Their processes need to comply with relevant drugs act in their respective countries.

Therefore, if you are planning to invest in pharmaceutical processing, a good project report will be necessary. Besides the prominent aspects of a project report, you should pay close attention to the following issues in a pharmaceutical processing report.

1. Marketing

This industry is very competitive. I need not stress the value of detailed market analysis. You need to understand the status of market competition and the demand for pharmaceutical products. A proper market analysis will additionally help you prepare an excellent pharmaceutical business plan. Given your market analysis report, you will develop a marketing plan.

2. Government approval

In almost all countries, there are laws and regulations for the manufacture, distribution, and administration of drugs. Consider giving a status report on these requirements when making the final project status report.

3. Manufacturing Process

It would help if you had a picture of the process you will employ in making your drugs. Outline the quality checks and balances in the process. State the required pharmaceutical intermediates and their corresponding active pharmaceutical ingredients.

4. Machines and Equipment

You need to identify the equipment you will need, such as homogenizers, spectrophotometer, tabulating machines, etc. to ensure the machines meet quality specifications. You may also need to put down a plan to train workers on their operations.

How Does the Drug Manufacturing Process Work?

If you are an aspiring drug manufacturer, you should know how the bulk drug manufacturing process works. This is a complicated process and requires professional skills in molecular biology, medical microbiology, and pharmacy.

The process involves four steps, namely:

  • Milling
  • Granulation
  • Coating
  • Tabulation

Milling is important because it makes the drug powder uniform. It ensures uniform distribution of the active pharmaceutical ingredients. Additionally, milling makes it easier to formulate the drug into a syrup or emulsion.

After milling, you can use wet or dry granulation to form granules. You then coat them and compress the drugs using a tabulating machine. Alternatively, you can fill the granules into capsules.

For any chemical industry business ideas, prioritize the security of your staff. Ensure workers have sufficient PPEs. Have plans to protect them from chemical poisoning. Install eyewashes and emergency showers in both production units and laboratories.

Pre-Feasibility Report on Bulk Drug Manufacturing Process

Before you set up a feasibility report or start making a business plan, you first need to do a pre-feasibility study. It is the conclusions of this study that will make you decide whether to proceed to the project feasibility report or not.

Implementing a pharmacy business plan is an expensive affair. Please do not put any investment into a business plan of this magnitude without looking at its feasibility study report.

Considering the variety of pharmaceutical products, a feasibility plan will help you decide on the most relevant product for your target market. The results of pre-feasibility and feasibility studies will inform your marketing strategy plan. At the pre-feasibility stage, you get to review the technical skills required for the bulk drug manufacturing process. You also assess the knowledge level and determine whether you have the knowledge and skills.

Lastly, this report looks at the financial demands of a chemical project report on bulk drug processing. From here, you will decide on the feasibility of the project.

How to Grow Pharmaceutical Intermediates Market?

The pharmaceutical industry relies on pharmaceutical intermediates. We use these chemicals to produce active pharmaceutical ingredients (API). 

To grow the pharmaceutical intermediates market, therefore, we should focus on the drug manufacturing industry. Here are some tips on how we can grow this industry.

1. Investment in Research and Development

We should encourage governments and established drug manufacturers to invest in research and development of new medicines. New drug development will increase the need for pharmaceutical intermediates. Consequently, this will cause the growth of the industry.

2. Boost Generic Drug Manufacturing

Feasibility study reports for project ideas in pharmaceuticals show a growing demand for generics. This demand is particularly high in developing countries. More investment in generic drugs will result in increased demand for pharmaceutical intermediates.

3. Collaborations

It is quite expensive to run a pharmaceutical intermediate processing company. If you look at a project summary example for the local industry and you will notice the huge investment. One way of cushioning the industry is to encourage collaborations, mergers, and acquisitions. Working together gives small-scale companies a competitive advantage. It lowers their operation costs and improves revenue.

How to Set Up a Chemical Industry Business Plan?

Writing a chemical industry business plan begins with a pre-feasibility study. Here, you look at the various business ideas in chemical manufacturing. You then evaluate each of these ideas based on:

1. Skills and Knowledge

If you are interested in the chemical manufacturing industry, I assume that you have some skills or knowledge in this sector. If so, look at the skills required for each idea you have. Which of these ideas marches your skills and knowledge?

2. Financial Resources

Different chemical processes have different cost implications. Try to review each idea against the expected financial input. You can examine some business plan examples on the internet to get a hint on required inputs. Once you have a convincing pre-feasibility report, you can proceed to make a feasibility report meaning the idea is profitable and viable.

The next step in setting up a chemical industry business plan is to prepare a small business marketing plan. The results of your feasibility report will help do this.

Chemical manufacturing is not only expensive, but it is also strictly regulated by law. It would be best if you had an innovative marketing strategy to break even. It would be best if you did an accurate market analysis.

A project report on the pharmaceutical industry helps you assess the dynamics of the industry. You will want to know who the major chemical manufacturers are. You will also assess the availability of raw materials and machinery for your pharmaceutical industry.

In your project report, you will also address the technical aspects of the pharmaceutical manufacturing process. You need to draw a flow diagram for the process. Lastly, sit down and draw a business plan for your chemical industry business. You will need the information from all the above processes. Additionally, a business plan will consider the financial implications of your pharmaceutical industry project report.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 7 of 26 | Total 259 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 25 26   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Surgical Cotton - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Surgical cotton is also known as absorbent cotton or cotton wool. It is mainly used for medical purposes in hospitals, nursing homes, dispensaries at home (for first aid) etc. because of its high fluid absorbency. It is better known among masses as absorbent cotton. Absorbent cotton or surgical cotton is used at each level from medical to corporate and also individual level. This item is regulated under drug control act. Hence, it should be manufactured to meet its requirements for quality control standards. Apart from used as a dressing material, it is also used for padding for items of clothing, quilts etc. The absorbent cotton should be chemically inert and soft to give maximum protection and should not cause irritation. These properties can be achieved by manufacturing the product as per standard method of manufacture. The raw cotton is processed by series of steps which render the cotton hydro-phallic in character and free from external impurities needed to be fit for use in surgical dressings and personal hygiene. The demand for surgical cotton is directly related with the hospital, dispensaries, nursing homes, health care center etc. Progressive increase in health amenities offered by government and coming up of new hospital and health care center in private sector, even small towns are contributing to the growth of absorbent cotton industry. Government hospitals and nursing homes are the largest consumers of surgical cotton. With the development of medical facilities and growing awareness towards personal hygiene, the surgical cotton industry registered steady growth rate in the past, and is packing up pace with spread of education and upward economic growth of town and villages. In coming years the demand of surgical cotton will increase so there is wide scope for new entrepreneurs to venture into this project.
Plant capacity: 225 MT/AnnumPlant & machinery: 22 Lakhs
Working capital: -T.C.I: Cost of Project : 80 Lakhs
Return: 41.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

SORBITOL, MALTITOL, DEXTROSE ANHYDROUS AND VITAMIN-C - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Production Schedule

Sorbitol is a water soluble polyhydric alcohol, having sweet taste and high stability besides properties of humectancy and plastisizing used in manufacture of tooth paste, tonics, pharmaceutical formulations, cosmetics etc. Maltitol is a polyol or sugar substitute that is understood to be almost as sweet as conventional granulated sugar. It is a reduced caloric bulk sweetener with sugar like taste and sweetness. Maltitol is especially useful in the production of sweets, sugarless hard candies, chewing gum, chocolates, baked goods and ice cream. It is useful in the diets of people with diabetes control of blood glucose. Lipids and weight are the three major goals of diabetes management today. Dextrose anhydrous is the purest form of dextrose, commonly called glucose. It is used in tableting (salt tablets) and as a raw material in the fermentation industry for biochemical synthesis of antibiotics and vitamin C, via sorbitol. Vitamin C, is a sugar acid and act as an antioxidant. This material is generally found in crystallized or powder form with white or light yellow appearance and is water soluble. Demand growth of this industry is very good. So there is good scope for new entrepreneurs. Few Indian major players are: (Sorbitol) Amaravati Chemicals Ltd. Gayatri Bioorganics Ltd. Gulshan Polyols Ltd. Hico Products Ltd. Jayant Vitamins Ltd. Sayaji Industries Ltd. Sukhjit Starch & Chemicals Ltd. Tan India Ltd. Unicorn Organics Ltd. (Dextrose) Indian Maize & Chemicals Ltd. Kamala Sugar Mills Ltd. Origin Agrostar Ltd. Tirupati Starch & Chemicals Ltd. Unique Sugars Ltd.
Plant capacity: 35 MT/Day, 15 MT Sorbitol, 5 MT Maltitol, 10 MT Dextrose Anhydrous, 5 MT/Day Vitamin C Plant & machinery: 607 Lakhs
Working capital: -T.C.I: 2332 Lakhs
Return: 39.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

SORBITOL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Sorbitol, also known as glucitol, is a sugar alcohol that the body metabolises slowly. It is obtained by reduction of glucose changing the aldehyde group to an additional hydroxyl group. Sorbitol, a water soluble polyhydric alcohol, having sweet taste and high stability besides properties of humectancy and plasticizing is used in manufacture of Toothpaste, Tonics/liquid Pharmaceutical Formulations, Cosmetic products like Face Creams and Lotions, etc. Sorbitol, besides being immune to bacteriological degradation, is also less vulnerable to mould growth than most other humectant plasticizing materials. Sorbitol is produced by Hydrogenation of Dextrose at medium pressure with State of Art reaction controls. The Dextrose is produced in house from Starch by enzymetic process in order to achieve highest standard of product.. The clear dextrose solution is reacted with hydrogen gas in the presence of catalyst in the reactors at specified pressure and temperature which is subsequently subjected to carbon treatment, ION Exchange etc. The solution thereafter is subjected to chemical adjustments, testing for chemical properties. The required concentration or Sorbitol (70%) is achieved in Evaporators before final testing etc. So Apart from having wide range application, the major uses are in dentrifice, cosmetics creams, lotions and colognes which have become daily consumer product of the society. In pharmaceutical sector it finds application in Vitamin Syrups, Cough Syrups, tablet compounding and many others. Sorbitol is also a raw material for production of Vitamin C. It also has application in Food products and Tobacco conditioning, high quality papers etc. DEMAND SUPPLY SCENARIO • Present Import Level Around 500 tonnes per annum • Present Export Level Around 300 tonnes per annum Consolidated demand statement for Sorbitol • Total annual demand 58000 tonnes Prospects Sorbitol finds variety of applications in number of user sector. The several potential applications of Sorbitol have not yet been adequately exploited in India. While the demand for Sorbitol is steadily going up, the rate of growth in demand would further increase, if sustained efforts would be taken to promote application of Sorbitol in new directions. Few Indian major players are: Amaravati Chemicals Ltd. Gayatri Bioorganics Ltd. Gulshan Polyols Ltd. Hico Products Ltd. Jayant Vitamins Ltd. Sayaji Industries Ltd. Sukhjit Starch & Chemicals Ltd. Tan India Ltd. Unicorn Organics Ltd.
Plant capacity: 4500 MT/AnnumPlant & machinery: 65 Lakhs
Working capital: -T.C.I: Cost of Project : 186 Lakhs
Return: 43.00%Break even: 69.00%
Add to Inquiry Add to Inquiry Basket

SURGICAL SUTURES MATERIALS (Surgical Gut, Polyglactin, Polyglycolic Acid, Poliglecaprone, Polydioxanone, Nylon, Polypropylene, Polyester) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey

General classification of sutures includes natural and synthetic, absorbable and non absorbable and monofilament and multifilament. Natural materials are more traditional and are still used in suturing today. Synthetic materials cause less reaction and the resultant inflammatory reaction around the suture materials is minimized. Absorbable sutures are applicable to a wound that heals quickly and needs minimal temporary support. Their purpose is to alleviate tension on wound edges. The newer synthetic absorbable sutures retain their strength until the absorption process starts. Non-absorbable sutures offer longer mechanical support. The absorbable sutures include the monofilamentous monocryl (poliglecaprone), Maxon (Polyglycolidetrimethylene carbonate), and PDS (Polyglactin) and Dexon (Polyglycolic acid). Nonabsorbable sutures comprise nylon, prolene (Polypropylene), Novafil (Polybuster), PTFE (Polytetra fluoroethylene), steel and polyester. Nylon and steel sutures can be monofilaments or multifilaments. Prolene, Novafil and PTFE are monofilaments. Braided sutures are typically more pliable than monofilament and exhibit better knot security when the same type of knot is used. Their major advantage is that they exhibit less tissue drag, a characteristic that is especially important for cardiovasculary ophthalmic and neurological surgeries. A recent source in the literature lists eight objective and three subjective parameters for suture selection based on criteria such as tensile strength, strength retention, knot security, tissue drag, infection potential and case of tying. So, there is good future prospect for this industry and new entrepreneur enter in this project will be successful.
Plant capacity: 12000 PCS/dayPlant & machinery: 856 Lakhs
Working capital: -T.C.I: 1673 Lakhs
Return: 42.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

CORN PROCESSING PLANT (For Glucose Syrup & Fructose)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Cost of Project

Glucose Syrup is a clear, colourless, viscous solution making it compatible with the physical properties desired in the end products chemically, glucose syrup has functional properties such as high fermentability, viscosity, humectancy – hygroscopicity, sweetness, colligative properties and its role in maillard’s reaction. Glucose syrup is one of the main products of photosynthesis and starts cellular respiration in both bacteria and archaea. Fructose is a simple monosaccharide found in many foods. It is a white solid that dissolves readily in water. Honey, tree fruits, barriers, melons, and some root vegetables, contain significant amounts of the fructose derivative sucrose. Sucrose is a disaccharide derived from the condensation of glucose & Fructose. Fructose corn syrup is a sweetener made from corn and can be found in numerous foods and beverages on grocery store shelves. High fructose corn syrup is composed of either 42 or 55 percent fructose with the remaining sugars being primarily glucose and higher sugar. It terms of composition, high fructose corn syrup is nearly identical to table sugar, which is composed of 50 percent fructose and 50 percent glucose. Glucose is one of the simplest forms of sugar that serves as a building block for most carbohydrates. Fructose is a simple sugar commonly found in fruits and honey. High fructose corn syrup is used in foods and beverages because of the many benefits it offers. In addition to providing sweetness at a level equivalent to sugar, high fructose corn syrup enhances fruit & spice flavours in foods. Such as yogurt and spaghetti sauces, gives chewy breakfast bars their soft texture and also protects freshness. Fructose corn syrup keeps products fresh by maintaining consistent moisture. In Indian food market is poised to grow two fold by in the coming years. At a compound annual grow rate of 4.1%. The steady growth of the Indian economy & the improving life style of Indians have been instrumental in this growth. So, there is good scope in future for these type of plants.
Plant capacity: 42000 MT/Annum (Corn Processing), 125 MT Glucose Syrup Per Day., 125 MT Fructose Per Day. Plant & machinery: 430 Lakhs
Working capital: -T.C.I: 1 Million
Return: 39.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirement of medicine and injections has increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. The disposable syringes market has now self-destructing or auto-disable (AD) syringe as a safe bet against re-use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self-breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed-ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small-scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. There is a good scope in this sector. In the Indian single uses syringes market, which is nearly 1.5 bn units strong, Hindustan Syringes and Medical Devices (HMD) enjoys a 65% market share. Imports constitute 10% of this market. In the single use needles market, HMD has a 70% market share, followed by imported brands with a 25% market share. The size of the local needles market is 2.5 bn units per annum. Dispovan is the dominant brand in India, and it has been able to maintain and increase its market share in face of stiff competition from multinational and domestic challengers. Few Indian Major Players are as under: Albert David Ltd. Disposable Medi-Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd. Transmedica (India) Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 44.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable syringes are a great innovation in the field of medical equipment. They are used for intramuscular and intravenous injections and are disposed off immediately after usage. The major advantages of using disposable syringes are that no infection is transmitted since the injection is disposed off immediately after use. Long before in 1960’s glass syringes which were re-useable after sterilization were being replaced with disposable plastic syringes and single-use needles. With the replacement of traditional glass syringes by disposable syringes for convenience, safety, the demand for plastic disposable syringes is growing at very fast rate. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel or cylindrical tube. Disposable needle is widely used by doctors for injection purpose with the help of syringes. With the increase in population in our country, requirement of medicine and injections has increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. The disposable syringes market has now self-destructing or auto-disable (AD) syringe as a safe bet against re-use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self-breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed-ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small-scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. There is a good scope in this sector.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 36.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

GLUCOSE SALINE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

Dextrose is a carbohydrate caloric agent. Glucose, also known as dextrose, is a simple sugar that can be found in nature and are chemically identical. Dextrose is simply in lay terms sugar water and is generally used in those patients who have a very low blood glucose level or are unable to eat for some reason. It is a short term treatment generally. D5NS (Dextrose 5% in normal saline) is hypertonic, meaning it has a higher solute concentration than tissues, so it can be used to help draw fluids out of oedematous (fluid-swollen) tissues. Dextrose (glucose) 5% and normal saline (sodium chloride or common table salt 8.5 grams per 100 ml of distilled water), have the same tonicity or concentration of the rest of the body fluids, that is, they will do no harm to the rest of the fluids of the body whereas Saline or 9%NS IV solution is used as the universal fluid replacement in dehydrated individuals, it is the same composition as the body's normal fluid and most IV medications can safely be mixed with or push through saline. Dosage of dextrose depends on the age, weight, clinical condition, and fluid, electrolyte, and acid-base balance of the patient. Dextrose is readily metabolized; it increases blood glucose concentrations and provides calories. Dextrose may decrease body protein and nitrogen losses, promote glycogen deposition, and decrease or prevent ketosis if sufficient doses are given. Since dextrose is usually metabolized to carbon dioxide and water, administration of a solution of dextrose and water is equivalent to providing the same volume of free water. Following oral administration, dextrose, a monosaccharide, is rapidly absorbed from the small intestine principally by an active mechanism. In patients with hypoglycemia, increases in blood glucose concentration usually occur within 10–20 minutes and peak at about 40 minutes after oral administration of dextrose. In medicine, saline (also saline solution) is a general term referring to a sterile solution of sodium chloride (NaCl, more commonly known as salt) in water but is only sterile when it is to be placed intravenously; otherwise, a saline solution is a salt water solution. Thus, an intravenous infusion, a saline solution is typically mixed with dextrose or glucose to reduce any complications from infusing saline solution and to reduce the amount of sodium circulating through the blood stream. This works particularly well as a water and nutrient supplement to sustain hospitalized patients who are unable to eat or drink or who have suffered dehydration from severe vomiting or diarrhea. In present era, people are becoming very health conscious as the infection through air, water, food is prevailing across the country to the maximum. As hospitals are increasing day by day, doctors also prefer to use distilled water ampoules. There are several in organized and private sectors are engaged in the manufacturing of different grade dextrose saline solution. The demand growth is about 5% in each and every year. The entire demand gap is fulfilled by the domestic manufacturers. There is scope of dextrose saline bottle. New entrepreneur may launch in this field will be successful. Few Indian Major Players are as under: Gulshan Polyols Ltd. Kamala Sugar Mills Ltd. Origin Agrostar Ltd. Rai Agro Inds. Ltd. Sanjeevanee Pharmaceuticals Ltd. Santosh Starch Ltd. Sukhjit Starch & Chemicals Ltd. Unique Sugars Ltd. Universal Starch-Chem Allied Ltd.
Plant capacity: 3600 Thousand Bottles Each Bottles 500 ml/AnnumPlant & machinery: 66 Lakhs
Working capital: -T.C.I: Cost of Project : 153 Lakhs
Return: 42.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

DISPOSABLE PLASTIC SYRINGES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable plastic syringes are a great innovation in the field of medical equipment. Disposable needle is widely used by doctors for injection purpose with the help of syringes. A disposable plastic syringe is one of the fastest ways to administer life saving drugs and vaccinations to a patient. The major advantage of using disposable syringes is that no infection is transmitted since the injection is disposed off immediately after use. With the increase in population in our country, requirement of medicine and injections have increased. For more strength of people more number of needles is required with syringes. Tablets or capsules also play a great role in the life of human beings but injections are also a must to some extent. The disposable syringes market has now self-destructing or auto-disable (AD) syringe as a safe bet against re-use and spread of HIV, hepatitis and other infections. The national immunization policy has adopted the non-reusable, self-breaking syringes, though many States are yet to follow suit for the curative injections. Disposable surgical caps and mask are used considerably while performing an operation or undergoing surgical measures. Catheters are used for the purpose of passing urine for bed-ridden and emergency patients in hospitals, nursing homes etc. With the development of pharmaceutical industries the use of syringes and disposable needles will also develop. About 70% pharmaceutical industries are in small-scale sector. Disposable syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. Plastic can be used in place of metal without any problem. The procedure is also relatively easy and cheaper. New comer can well venture into this field. There is a good scope in this sector. Few Indian Major Players are as under: Albert David Ltd. Disposable Medi-Aids Ltd. H L L Lifecare Ltd. Hindustan Syringes & Medical Devices Ltd. Iscon Surgicals Ltd. La Medical Devices Ltd. Lifeline Injects Ltd. Lifelong Meditech Ltd. Nirma Ltd. Raaj Medisafe India Ltd. Sangam Health Care Products Ltd. Surgiplast Ltd. Transmedica (India) Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 41.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

SORBITOL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Sorbitol, a polyol (sugar alcohol), is a bulk sweetener. Sorbitol is produced either from starch hydrolysates, from dextrose syrup, or from dextrose monohydrate. It is a water soluble polyhydric alcohol, having sweet taste and high stability besides properties of humectancy and plasticizing. Sorbitol is about 60 percent as sweet as sucrose with one-third fewer calories. It finds a wide range of application such as oral care, cosmetics, pharma, paints, etc. Sorbitol also combines well with other food ingredients such as sugars, gelling agents, proteins and vegetable fats. It functions well in many food products such as chewing gums, candies, frozen desserts, cookies, cakes, icings and fillings. It is used to manufacture toothpaste, tonics/liquid pharmaceutical formulations, cosmetic products like face creams and lotions, etc. It has a smooth mouthfeel with a sweet, cool and pleasant taste. It is non-cariogenic and may be useful to people with diabetes. In pharmaceutical sector it finds application in vitamin syrups, cough syrups, tablet compounding and many others. A newly developing outlet for sorbitol is its use in producing clarifying agents for polypropylene. Clarifying agents enable polypropylene to substitute for higher cost polymers in food packaging, drinking cups and housewares. Sorbitol meant for other applications, be it food, hygiene products or pharmaceuticals, can be of the "non-crystallizing" type and is produced from starch hydrolysates. Sorbitol is produced either from starch hydrolysates, from dextrose syrup, or from dextrose monohydrate. Sorbitol is manufactured by reaction with hydrogen gas with high pressure hydrogenation of 50% aqueous dextrose solution at 140 to 165 Deg C in 3 to 4 hours with Raney nickel catalyst, using promoters such as salts of magnesium, nickel, molybdenum, iron etc. Generally dextrose is produced in house from Starch by enzymatic process The Indian demand is around 90000 tonnes per annum. In India, Sorbitol is produced only as 70% solution and the operating capacity is around 125900 tonnes per annum. The global demand is around 1.6 million tonnes per annum (both liquid and crystalline) with a growth rate of around 3% per annum. Major Manufacturers • Anil Products Ltd.,Ahmedabad • Gulshan Polyols (Gulshan Sugars & Chemicals Ltd.,) Delhi • Maize Products,Ahmedabad • Gujarat Ambuja Proteins Ltd. Ahmedabad • Sukhjit Starch Chemicals, Punjab • Kasyap Sweetners Ltd., Madhya Pradesh • Roquette America, Inc.US • Atanor S.A.USA • Coyne Chemical,USA • Habib Arkady Ltd.,Pakistan • Mudanjiang Pharmaceutical Group Co. Ltd.China • Pt Sumi Asih Oleochemical Industry,China • Shanghai Haohua Chemical Co., Ltd.Shanghai,China Sorbitol’s good taste, reduced caloric value, versatility and other advantages facilitate its use in a wide variety of products. With the increasing demand for products reduced in calories or fat, sorbitol’s use should increase as well. Considering the application potentials of sorbitol and the feasibility of exploiting the export opportunities, creation of new capacity for Sorbitol can be considered in the country.
Plant capacity: 40.0 Tonnes/DayPlant & machinery: 1
Working capital: N/AT.C.I: 1
Return: 1.00%Break even: 1.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 7 of 26 | Total 259 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 25 26   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top