Google Search

Search

Already a Member ?

Minerals, Marble, Granite, Gypsum, Quartz, Talc, Mica Projects

India is rich in natural resources. Minerals constitute the back-bone of economic growth of any nation and India has been eminently endowed with this gift of nature. There is much evidence that exploitation of minerals like coal, iron-ore, copper, lead-zinc has been going on in the country from time immemorial.  Natural stones like granite and marble are capable of taking a high polish and are therefore used as decorative stones for cladding purpose in the construction industry, as well as for monumental and memorial work. Marble carries a status symbol of luxury and it gives a long-term benefit to one who has purchased it. This is so because it is a very durable stone. The marble tiles can be used for indoor and outdoor decorations of your home. Floors, countertops, fireplaces, porticos of large or small buildings can be made elegant and luxuriant by marble. Large buildings, monuments, mansions, multi-storied buildings make use of this stone for adding that elegant decorative touch.

Since granite is a hard rock, special grinding and polishing heads are used for rapidly grinding and polishing the slabs of granite. For polishing soft stones like marble, it is necessary to have a complete surface to surface contact of the abrasive and marble. The basic principle of polishing any natural stone is to hone the surface of the stone by progressively using finer mesh of abrasives until the natural luster of the stone is obtained. A polished piece of natural stone is capable of reflecting a major portion of the light falling on it. In most modem stone processing plants, bonded abrasives are used for grinding and polishing natural stones. India is largely self sufficient in most of the minerals which include barytes, bauxite, chromite, dolomite, fluorspar, gypsum, iron ore, kyanite, limestone, manganese ore, magnesite, sillimanite, etc. except the minerals like copper, asbestos, lead and zinc, natural phosphates, sulphur and crude petroleum, in which domestic production meets the demand only partially.

India has one of the largest reserves of granite in the world and exported Rs 2,600 crore (Rs 26 billion) worth of the stone last year. Granite exports this fiscal are expected to touch Rs 2,800 crore (Rs 28 billion) and nearly one-fourth of these exports is accounted for by monument stones.

Indian granite exports have declined 33 per cent between 2006-07 and 2008-09. The sector, which relies heavily on American and European demand, was among the first to feel the heat of the sub-prime crisis. Its export revenues fell steeply in 2007-08, even before there were visible signs of a slowdown in Indian housing and industry. What perhaps explains the increase in volumes in 2007-08 is that polished granite, which commands a better price, was substituted by semi-finished blocks. Yet, prices in the latter category remained unattractive, reflecting the severity of the recession. Volumes increased by 10.2 per cent in 2007-08 over the previous year, while revenue earned from exports decreased by 17.6 per cent this year. The decline in export earnings and volumes was more pronounced in 2008-09. The export of polished granites blocks and slabs more than halved in 2008-09 at 2.75 lakh tonnes compared with 5.52 lakh tonnes in 2007, while in 2007-08 it was 4.13 lakh tonnes. Export revenue in this segment declined 51.9 per cent – more than the sector as a whole – to Rs 862.63 crore 2008-09 from Rs 1,791.98 crore in 2006-07. In 2007-08, it was Rs 1,332.56 crore. However, the export of semi-finished blocks to China has not been as badly affected. The export volumes of crude or roughly trimmed granite increased to 25.63 lakh tonnes in 2008 from 21.47 lakh tonnes in 2007. In 2009, it declined to 23.92 lakh tonnes. Exports revenue largely remained flat at Rs 1478.95 crore in 2009, compared with RS 1479.44 crore in 2008. In 2007, it was Rs 1703.37 crore. Granite accounts for 10 per cent of India’s minerals’ output. Over the last three decades the Indian granite industry has modernized to global standards. Sculptures and monuments made in India are being exported all over the world.

About 85-90 per cent of the total granite production in the country is for exports. So after this recession period over the industry will again regain its demand .This is the best time for an entrepreneur to venture into this sector.

Coming to gypsum products in India, gypsum has proved to be a miraculous material aiding interior construction. Gypsum surface plaster is one form that has caught the attention on the sector and is growing in popularity. In recent years, the construction sector has witnessed a number of new trends, technology advancements and innovations across applications, all aimed at making construction faster and delivering higher performance. The industry of cement and gypsum products in India is the second biggest manufacturer of high grade cement in the whole world. The cement and gypsum products industry in India consists of over 300 small cement plants and around 130 large cement plants with the total production capacity of more than 167.36 million tons. The different varieties of cement manufactured in India are Oil Well cement, White cement, Portland Pozzolana cement, and Ordinary Portland cement.

Some of international companies having presence in cement and gypsum products industry in India are: Lafarge, Italcementi, Heidelberg Cements, and Holcim.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 6 of 11 | Total 107 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Graphite Mining and Processing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Graphite is a form of elemental carbon. It is one of the three allotropic forms which the element carbon exists in nature the other two being coal and diamond. It crystallizes in hexagonal system in plenty form but it is rare the perfect crystal graphite have been found. The three principal types of natural graphite – lump, crystalline flake, and amorphous – are distinguished by physical characteristics that are the result of major differences in geologic origin and occurrence. Graphite properties determine the variety of the areas of application in industry, transport, energetic, defence, medicine, sports. The mine would operate at an annual run of 120,000 tonnes at commencement the mining operation is considered in day shift only, where as the process plant will operate in the 3 shift per day. The performance of graphite industry is linked to the steel sector as graphite electrodes are required in the EAF route of steel production. India is another leading producer; accounting for 15% of world production over the last decade with growing global steel production and consumption levels, the demand for graphite electrode is expected to remain in firm. So there is wide scope for new entrepreneurs to venture into this project.
Plant capacity: 24 MT/DayPlant & machinery: 1482 Lakhs
Working capital: -T.C.I: Cost of Project : 2669 Lakhs
Return: 44.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Calcined Bauxite - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Calcined bauxite is an important raw material for two main products, refractories and abrasives. Smaller volumes are consumed in other applications including proppant, welding fluxes and antiskid surface. While the process of calcining bauxite for each of these applications is fundamentally the same (i.e. it involve the same basic burning process), the physical and chemical characteristic of each grade vary. Calcined bauxite is classified by the major end use – abrasive and refractories. India currently imports 40–60% (about 1000 tpa) of its calcined bauxite from China. Spurred by expansion of domestic steel production, a scarcity of acceptable quality of bauxite from China and raising import cost, drives are now underway in India to produce high grade bauxite from domestic bauxite sources. At present, India is very minor producer of non – metallurgical bauxite, despite having occurrence of high grade bauxite in west coast and central India. This is attributed to limited effort to test high grade bauxite occurrence in region outside the main bauxite producing area around Gujarat. The product has good demand growth, so there is good scope for new entrepreneurs.
Plant capacity: 36000 MT/AnnumPlant & machinery: 318 Lakhs
Working capital: -T.C.I: Cost of Project : 882 Lakhs
Return: 43.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Magnesium Oxide (Specially Light Grade) from Dolomite - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Production Schedule

Magnesium oxide, or magnesia is a white solid mineral that occurs naturally as periclase and is a source of magnesium. It has empirical formula of Mgo. It is formed by an ionic bond between one magnesium and one oxygen atom. Magnesium oxide is easily made by burning magnesium ribbon which oxidizes in bright white light, resulting in a powder. It is hygroscopic in nature and care must be taken to protect it from moisture. The mineral known as dolomite is found as beds of rock also known as dolomite and as areas of mineral dolomite in lime stone. The magnesium oxide is used in grinding wheel, in medicine, for making cement in dry process plants; specifically Portland cement, as an insulator in industrial cables, as a basic refractory material for crucibles, in construction materials used for fireproofing, in feeding animals and there are special grades available, in leather processing. Magnesium oxide has good demand, so there is bright scope for new entrepreneurs to venture into this project.
Plant capacity: 48 MT/DayPlant & machinery: Rs. 2700 Lakhs
Working capital: -T.C.I: Rs. 6650 Lakhs
Return: 45.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

ALUMINA FROM BAUXITE

Bauxite ore is an important mineral used in producing alumina, the raw material that is in turn used for producing aluminum. Approximately 85% of Bauxite is converted into alumina, 5% is used in non-metallurgical bauxite applications, and the remaining 10% is utilized in other applications. Leading countries contributing for about 70% of the total mined bauxite include Australia, Guinea, Brazil and Jamaica. On the other hand, Australia, the United States, China and Jamaica account for approximately 60% of the world's alumina production. Asia-Pacific is expected to remain the fastest growing as well as the largest Bauxite and Alumina Market. Europe, the second largest market, is projected to register sales of 52 million metric tons by 2010. The worldwide capacity to produce alumina was placed at around 80 mn tonnes in 2007 and was slated to touch 100 mn tonnes in 2010. Alumina accounts for about 22% of the cost in the production of aluminium. India's share in world aluminium market is estimated at around 3%. India ranks fifth in bauxite production after Australia (62 mn tonnes), Guinea (17.50 mn tonnes), Brazil (16.20 mn tonnes) and China (10.75 mn tonnes). With a total output of 9.25 mn tonnes, the country contributes about 6% of the world's total production of 159 mn tonnes, India holds the fifth position in reserves base and is ahead of China with 2300 mn tonnes. India ranked seventh in alumina production with a total output of 3 mn tonnes, a share of nearly 5% of the global production of 61 mn tonnes. About 25% of all bauxite mined is used for producing abrasives, catalysts, adsorbents, and other industrial chemicals. Bauxite in India is available in Katni, Belgaum, Kohlapur, Ranchi, Lohardanga, Bhopal, Orissa, Andhra Pradesh. A reserve of about 571 million tons has been estimated from 25 deposits in Visakhapatnam and East Godavari District. These gibbsite bearing deposits have an average Al2O3 of 46.76%with low silica (4%) and titanium (2%) but high in iron (8-28%) and are best suited for alumina extraction by the Bayer’s process under low P.T. conditions. Other uses are in the cement industry, in the manufacture of ferric alum & aluminous chemicals. Demand for aluminium is estimated to grow at 4 to 6% per annum. The demand for the metal is expected to pick up as the scenario improves for user industries like power, infrastructure and transportation, which are all on the move. There is a good market potential and scope to venture in this field. Few Indian Major Players are as under: Bharat Aluminium Co. Ltd. Hindalco Industries Ltd. Madras Aluminium Co. Ltd. National Aluminium Co. Ltd.
Plant capacity: 19998 MT/Annum Pure Alumina from BauxitePlant & machinery: 671 Lakhs
Working capital: -T.C.I: Cost of Project : 2113 Lakhs
Return: 43.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

SILICO MANGANESE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Manganese and silicon are crucial constituents in steelmaking, as deoxidants, desulphurizers and alloying elements. Silicon is the primary deoxidizer. Manganese is a milder deoxidizer than silicon but enhances the effectiveness due to the formation of stable manganese silicates and aluminates. It also serves as desulphurizer. Manganese is used as an alloying element in almost all types of steel. Of particular interest is its modifying effect on the iron-carbon system by increasing the hardenability of the steel. Thus both silicon and manganese have an important influence on the properties of steel, depending on the amount added and the combined effect with other alloying elements. About 93 % of all manganese produced is in the form of manganese ferroalloys. The FeMn grades are high carbon (HC), medium carbon (MC), low-carbon (LC) and very low carbon (VLC), whereas the SiMn grades are medium carbon (MC) and low carbon (LC). The steel industry is the only consumer of these alloys. Silico manganese (SiMn), a ferroalloy with high contents of manganese and silicon, is made by heating a mixture of the oxides manganese oxide (MnO2), silicon dioxide (SiO2), and iron oxide (Fe2O3), with carbon in a furnace. They undergo a thermal decomposition reaction. It is used as a deoxidizer and an alloying element in steel. The standard grade silico manganese contains 14 to 16% of silicon, 65 to 68% of manganese and 2% of carbon. The low carbon grade SiMn has carbon levels from 0.05 to 0.10%. Demand for steel has been rising due to ongoing economic boom leading to rapid growth in various industries in the world's two largest populous countries in Asia-Pacific, China and India, with simultaneous increase in production leading to wide fluctuations is steel prices. Other countries in Asia-Pacific such as Japan, South Korea, and Taiwan; Middle East, Eastern Europe, and Latin America have witnessed an increase in steel consumption. A changing lifestyle, increasing disposable income, changing consumer thinking, rising consumption, and various other factors; demand for steel witnessed an increase leading to an increase in manganese demand. This trend is expected to continue for another five years after which demand is expected to stabilize. There is a very good scope in this field and new entrepreneurs should venture in such projects. Few Indian Major Players are as under: Aarti Steels Ltd. Adhunik Metaliks Ltd. Alok Ferro Alloys Ltd. Bhaskar Shrachi Alloys Ltd. Bihar Foundry & Castings Ltd. Bishwanath Ferro Alloys Ltd. Castron Technologies Ltd. Century Plyboards (India) Ltd. Cronimet Alloys India Ltd. Ductile Castings Ltd. Garg Industries Ltd. (Duplicate Name, Punjab) Indsil Hydro Power & Manganese Ltd. Jalan Ispat Castings Ltd. Karthik Alloys Ltd. Maharashtra Elektrosmelt Ltd. Nagpur Power & Inds. Ltd. Natural Sugar & Allied Inds. Ltd. Nav Chrome Ltd. [Merged] Nava Bharat Ventures Ltd. Quality Steels & Forgings Ltd. Shri Girija Smelters Ltd. Shyam Century Ferrous Ltd. Shyam Ferro Alloys Ltd. Silcal Metallurgic Ltd. Sova Ispat Alloys (Mega Projects) Ltd. Sova Ispat Alloys Ltd. Srinivasa Ferro Alloys Ltd. Star Metallics & Power Pvt. Ltd. Super Steel Casting Ltd. V B C Ferro Alloys Ltd.
Plant capacity: 14400 MT/AnnumPlant & machinery: 897 Lakhs
Working capital: -T.C.I: Cost of Project : 1861 Lakhs
Return: 40.00%Break even: 70.00%
Add to Inquiry Add to Inquiry Basket

Bentonite Processing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bentonite is essentially highly plastic clay containing not less than 85% clay mineral, montmorillonite. Bentonite is of a great commercial importance possessing inherent bleaching properties like fullers earth, hence, it is known as bleaching clay. There are two types of bentonite viz swelling type or sodium bentonite and nonswelling type or calcium bentonite. Much of bentonites usefulness in the drilling and geotechnical engineering industry comes from its unique rheological properties. It can be used in cement, adhesives, ceramic bodies and cat litter. Bentonite has also number of uses in different industries. The strong growth in India has led to an exponential demand for foundry costing products for automotive industry. Also due to huge demand of iron ore pelletization, demand for bentonite in India would augment for years to come. It is advisable for new entrepreneurs to venture into bentonite processing industry. Few Indian Major Players are as under: Ashapura Claytech Ltd. Ashapura International Ltd. Gimpex Ltd. Rajasthan State Mines & Minerals Ltd. Sivashakthi Bio Planttec Ltd. Trimex Industries Ltd.
Plant capacity: 3000 MT/AnnumPlant & machinery: 259 Lakhs
Working capital: -T.C.I: Cost of Project : 665 Lakhs
Return: 43.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

CALCINED BAUXITE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Calcined bauxite is an important raw material for two main markets: refractories and abrasives. Smaller volumes are consumed in other applications including proppants, welding fluxes, and antiskid surfaces. While the process of calcining bauxite for each of these applications is fundamentally the same. Calcined bauxite is in pure form and in different particle size. Calcined bauxite is widely used in various industries such as refractories, steel plants and so on. Calcined bauxite is one of the chief sources of aluminum. The most important use of bauxite is in metallurgical industry i.e., manufacturing of aluminium. But, it has a few non metallurgical uses also. In most of the uses, however, the products are based on an intermediate product namely, alumina which is made directly from bauxite. The important uses are: Aluminium metal, Semi-fabricated products or semis, Aluminium alloys, Reinforced aluminium composites, Petroleum refining and fertilizer manufacture, Aluminous cement, Proppant in oil wells and Ball mill grinder etc. There is very wide scope and good market potential of products manufactured in this sector.
Plant capacity: 60,000 MT/Annum Plant & machinery: 438 Lakhs
Working capital: -T.C.I: Cost of Project : 1214 Lakhs
Return: 41.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

CHROMITE BENEFICIATION PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Chromite is an oxide of chromium and iron. The chemical composition of chromite is FeO.Cr2O3 or FeCr2O4. Chromite is the only commercial source of chromium. It occurs as a primary mineral of ultrabasic igneous rocks and is normally associated with peridotite, pyroxenite, dunite and serpentinite. World-wide, high-alumina chromite, largely from podiform deposits is used in refractory applications while iron-rich ores, largely from stratiform deposits are utilised in metallurgical and chemical applications. Chromite is an early magmatic oxide mineral. It forms ore bodies by crystallization and segregation. The chromite ore bodies are hosted invariably by the early magmatic silicate rock peridotite, pyroxenite and less commonly by anorthosite. In metallurgy, chromite is used in the manufacture of chromium metal and various alloys with iron, nickel, cobalt, tungsten, molybdenum, etc. Chromium imparts additional strength, hardness and toughness to its alloys. Chromite is used in refractory industry because of its resistance to corrosion, high temperature and ability to withstand sudden temperature changes, and its chemically neutral character. The ore is used in the form of lumps, bricks or cement in linings, specially of steel furnaces. Chromite is used for manufacturing important chromium compounds like chromates and bichromates of sodium and potassium, chromium pigments like chromic oxide green and chromic acid which, in turn, are used in chromium-plating solution. The number of reporting mines was 21 in both the years. Six principal producers operating 12 mines together accounted for 90% of the total production during the year. There is very good scope in this sector and new entrepreneur should venture into this field.
Plant capacity: 18,000 MT/Annum Chromite ConcentratePlant & machinery: 110 Lakhs
Working capital: -T.C.I: Cost of Project : 366 Lakhs
Return: 41.00%Break even: 65.00%
Add to Inquiry Add to Inquiry Basket

Gypsum Plaster Board - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Gypsum board, also known as drywall or plaster board, consists of a core of gypsum surrounded with a paper covering. Several varieties of gypsum board products are available; each is comprised of a specially formulated gypsum plaster mix and facing paper specifically developed for the intended application. These gypsum board products include regular gypsum wallboard, moisture resistant gypsum board, and type X fire resistant gypsum board. Gypsum plaster boards are classified according to their use. Gypsum wall board has a face to which decoration may be applied. There are five types of gypsum board product that are considered standard. Innovation has created several new products now available. • Standard Gypsum Board: Regular core, Flexible board, Type “X” fire resistant, Moisture resistant and Plaster baseboard. • Specialty Gypsum Board: Interior ceiling board, Mold & Moisture resistant, Shaft liner, Abuse resistant and Impact resistant. The compressive strength of hardened gypsum plaster boards depends on the quantity of water used in the paste before setting the strength of the product also depends upon its moisture content in the presence of 1% of moisture the compressive strength decreases to about 40% of that of the dry product because of the increased friction between the crystals. Often no further decrease of strength is observed when the moisture content increases over 1%. The bending strength of Gypsum plaster boards is usually 50% of the compressive strength. Gypsum boards and their related products can be used in a variety of applications. Gypsum board is widely used for internal walls and ceilings by the construction industry, and is a material of growing importance in the do it yourself sector. Gypsum board is also a common fire barrier used in house and general building construction. Commonly gypsum boards used in walls and ceilings, in moist areas, in exterior applications, for fire resistance and area separation and special systems. Gypsum plaster board (GPB) popularly known as gypboard, is a low cost, light weight construction material made from aerated gypsum plaster and produced in varying thicknesses suitable for different applications. Gypsum is an important raw material used in the manufacture of cement. Consumption of gypsum varies from 2 to 6% in different plants depending upon the quality of clinker. India has good reserves of natural gypsum, mainly concentrated in Rajasthan, Gujarat and Tamil Nadu. Besides, a number of chemical industries obtain gypsum as a by product in the form of phospho gypsum. The chemical gypsum can be utilised as a whole or as part substitute to natural gypsum. Many cement plants, which are located near the source of phosphogypsum are using this substitute product.
Plant capacity: 6600 No.s/day Plant & machinery: 192 Lakh
Working capital: -T.C.I: Cost of Project : 551 lakh
Return: 26.11%Break even: 61.30%
Add to Inquiry Add to Inquiry Basket

MARBLE AND ONYX - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Marble is a non-foliated metamorphic rock composed of recrystallized carbonate minerals, most commonly calcite or dolomite. Geologists use the term marble to refer to metamorphosed limestone; however stonemasons use the term more broadly to encompass unmetamorphosed limestone. Marble is commonly used for sculpture and as a building material. Onyx is a banded variety of chalcedony. Chalcedony is a cryptocrystalline form of silica, composed of very fine intergrowths of the minerals quartz and moganite. These are both silica minerals, but they differ in that quartz has a trigonal crystal structure, while moganite is monoclinic. Chalcedony's standard chemical structure (based on the chemical structure of quartz) is SiO2 (Silicon Dioxide). The colours of its bands range from white to almost every colour (save some shades, such as purple or blue). Commonly, specimens of onyx contain bands of black and/or white. APPLICATIONS: Marble is largely used by the construction industry, whereas, for furniture and other decorative purposes its tiles and big size cut slabs are also used in flooring of all kinds of buildings i.e. houses for accommodation purposes, mosques, commercial buildings, hotels etc. However, refined and high quality marble is extensively used in handicraft and Kitchen tiling and making of table tops by the furniture industry, whereas, onyx is largely used for the manufacturing of handicrafts mainly for export purposes due to its premium quality and expansiveness. Multipurpose use of marble and onyx has lead to the development of various industries including furniture, construction and handicraft etc. For the purpose of this pre-feasibility we have confined ourselves to the handicraft industry where both marble and onyx are used for the manufacturing of different articles of decoration i.e. vases, clocks, table lamps, ashtray, chessboard, candle stands, telephone set etc. For Marble and Onyx Products Manufacturing, stone is obtained by exploding in mountains, then bring them into factories and cut them into various sizes, here after converted into different sizes and shapes, rubbing and polishing is applied in the end to bring shining and smoothness to the handicraft. For this purpose various machines are use i.e. lathe machine, grinders, polishers etc. MARKET SCENARIO: Global demand for marble and onyx products largely depend on the tourism industry around the world so as the local industry which is export oriented due to low profit margins on such products in the local market. Based on our discussions with the existing players who are exporting such items, Russia is the new emerging market and growing very fast where some cults of catholic Christianity consider onyx a sacred stone. Therefore, Russia may be a permanent market which has opened to international tourists after the fall of USSR during 80s. Seasonal demand of Marble and Onyx products largely depend on religious and cultural occasions round the world. Its demand increases particularly during New Years beginning, on religious occasions i.e. Christmas, Valentines Day, during sports events i.e. Football and Cricket World Cups etc.
Plant capacity: --Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: 1.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 6 of 11 | Total 107 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top