Google Search

Search

Already a Member ?

Investment Opportunities In India, Identified Projects for right investment, Reasons for Investment, Core Project Financials, Potential Buyers, Market Size, Project Analysis, Booming sectors Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 6 of 9 | Total 84 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Liquid Hand Wash

Hands are primary mode of transmission of microbes and infections. Hand-washing is critical in food production, food service and also important in healthcare setting, homes and day care preparations. Hand hygiene is therefore the most important measure to avoid the transmission of harmful germs and prevent the infections. Hand hygiene is the single most important, simplest, and least expensive means of preventing nosocomial infections. To protect the skin from harmful micro organisms and to prevent spreading of many contagious diseases, hand washing is absolutely an important precaution. The significance of hand washing is more vital when it is allied to health care workers because of possible contagion of bacteria that can be pathogenic or opportunistic. Liquid soaps contain antimicrobial active ingredients which take away more bacteria as compared to plain soap. For control of Staphylococcal infections in hospitals and other health care’s, it has been found that the greatest benefits from hand washing came from the first 20% of washing and very petite additional benefits were gained when hand clean-up rate was increased beyond 35%. Washing with plain soap results in more than triple the rate of bacterial infectious diseases transmitted to food as compared to washing with antibacterial hand washes. Comparing hand washes with alcohol-based solutions and washing with antibacterial for a median time of 30 seconds, each one showed that the alcohol-based hand washes reduced bacterial contamination 26% more than the antibacterial. But liquid soap and water is the more effective than alcohol-based hand rubs for reducing H1N1 influenza A virus and Clostridium diffcile spores from hands. Liquid hand soap contains anionic surfactant, cocamide dea surfactant, coco betaine as amphoteric surfactant, opaque agent as making opaque, dye, fragrance, glycerine for prevention hand outside conditions and etc. In addition, antibacterial agent for making antibacterial hand liquid soap. Making hand liquid soap for children, can be used soft ingredients. For making natural liquid hand soap as opaque or clear not changing. used natural and herbal oil, potassium hydroxide, water, glycerine, dye and fragrance. These ingredients are used to make saponification for hand liquid soap as natural. One of the best ways to prevent infection from the coronavirus is to avoid being exposed to the virus and stop it from entering in the body. Some of the easiest ways to become infected by a virus is to transfer it from hands to mouth, nose or eyes. Washing hands using hand wash or soap has a dual effect, it primarily washes the virus away from body. It also disrupts the virus so it cannot bind and infect cells. The coronavirus (COVID-19) belong to the family of enveloped viruses. The “envelop” is like a jacket made up of lipids and proteins and protects the virus from the environment and helps it to enter human cells such as lung cells. Liquid hand wash, soaps, detergents and alcohol-based hand sanitizers disrupt the envelop resulting in the inactivation of these types of viruses. The global liquid soap market size was estimated at USD 18.50 billion in 2018. Rising awareness regarding personal hygiene among adults is expected to remain a key driving factor for the market. These liquid formulations are expected to gain popularity as they have low pH levels which make them gentler and suitable for people with sensitive skin. This factor is anticipated to contribute to the widespread adoption of the product in near future. Global Hand Soap market is forecast to witness rapid growth of around 6.7% over the forecast period of 2020-2030. Of all applications, the household segment accounts for more than 70% of the market share. Escalating demand for hand soap was observed in the first quarter of 2020 owing to the COVID-19 pandemic. In the 2nd quarter, the demand is projected to follow an upward trend with increasing awareness about hand hygiene across regions. The key market players include Reckitt Benckiser Group plc.; Procter & Gamble; Unilever; 3M; Lion Corporation; GOJO Industries, Inc.; Kao Chemicals; Godrej Consumer Products; Bluemoon Bodycare; NEW AVON LLC.; and Pental Products etc.
Plant capacity: -Plant & machinery: 1
Working capital: N/AT.C.I: 00
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Bleaching Powder

Bleaching powder is calcium hypochlorite ( Ca(OCl)2 ). Bleaching powder is a white - yellowish powder which very well dissolves in water. It is a one of the major chemical industry in the world. Limestone and chlorine gas are used as raw materials to manufacture bleaching powder which is used as a disinfectant and as an oxidizing agent. It is an inorganic compound. Bleaching powder is one of the most widely used bleaching, sanitation and disinfecting agents in the world. Bleaching powder is considered to be the best product to be used in swimming pool water treatment. As a mixture with lime and calcium chloride, it is marketed as chlorine powder for water treatment and as a bleaching agent. Calcium hypochlorite is an integral component of bleaching powder which also includes calcium chloride and slaked lime. Calcium hypochlorite is the second most used chemical type in the hypochlorite market; sodium hypochlorite (liquid bleach) being the most used type. Bleaching powder is extensively used as a chlorine compound, which is highly effective against several micro organisms such as algae, bacteria, fungi, slime and other harmful and unwanted micro-organisms which exist in the environment. The market is primarily driven by its use in swimming pools, hot tub water and spas. It is used in the swimming pools to kill thriving micro organisms which pose a threat to human health and also to prevent contamination. Strong solutions of Bleaching powder are used to disinfect and sanitize pool sides, pool bottom, diving boards, decks, ladders and other surfaces. It is also extensively used to treat waste water and disinfect sewages. It is commonly used as a bleaching agent and also finds application as industrial sanitizer. Characteristics of bleaching powder • Bleaching powder is a pale yellowish powder existing with a strong smell of chlorine. • It is soluble in water but due to the presence of impurities. • Its chemical formula is CaOCl2 with its chemical name as Calcium hypochlorite. Uses: • As a disinfectant and germicide especially in the sterilization of drinking water. • For the manufacture of chloroform. • For making wool unshrinkable. • As an oxidising agent in the industry. The global Bleaching Powder market is anticipated to rise at a considerable rate during the forecast period, between 2020 and 2026. In 2020, the market was growing at a steady rate and with the rising adoption of strategies by key players, the market is expected to rise over the projected horizon. The Bleaching Powder market provides a bird’s eye view of the current proceeding within the Bleaching Powder market. Further, the impact of the novel COVID-19 pandemic on the Bleaching Powder market and offers a clear assessment of the projected market fluctuations during the forecast period. The different factors that are likely to impact the overall dynamics of the Bleaching Powder market over the forecast period (2019-2029) including the current trends, growth opportunities, restraining factors etc. The key players of the market are Swastik Chemicals, Olin Chlor Alkali, Aditya Birla Chemicals, Lords Chloro Alkali Limited, GACL, Sree Rayalaseema Hi-Strength Hypo Ltd, Suvidhi Industries, OxyChem, Kuehne, Clorox, Hill Brothers Chemical, Vertex Chemical, HASA etc.
Plant capacity: -Plant & machinery: 1
Working capital: N/AT.C.I: 00
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing of Active Pharma Ingredients (API) (Amoxicillin Trihydrate, Azithromycin & Paracetamol).

Production of Active Pharma Ingredients (API) (Amoxicillin Trihydrate, Azithromycin & Paracetamol). Investment Opportunities in Pharmaceutical Industry. An active ingredient (AI) is that the ingredient in an exceedingly pharmaceutical drug that's biologically active. The similar terms active pharmaceutical ingredient (API) and bulk active i.e. bulk medicine are utilized in medicine, and therefore the term active substance could also be used for natural products. Thus, depending on the drug’s administered dosage, the reactions and results differ. Certain drugs are comprised of more than one kind of API. Amoxicillin is an antibiotic used to treat variety of bacterial infections. These include middle ear infection, strep throat, pneumonia, skin infections, and tract infections among others. It’s taken orally, or less usually by injection. Active Pharmaceutical Ingredient (API), is that the term used to check with the biologically active component of a drug product (e.g. tablet, capsule). Drug products are typically composed of many elements. The aforementioned API is that the primary ingredient. Alternative ingredients are commonly known as "excipients" and these substances are always required to be biologically safe, often making up a variable fraction of the drug product. The procedure for optimizing and compositing this mixture of components utilized in the drug is known as "formulation." Paracetamol is a commonly used medicine that can help treat pain and reduce a high temperature (fever). It is often recommended as one of the first treatments for pain, as it's safe for most people to take and side effects are rare. Azithromycin is an antibiotic used for the treatment of variety of bacterial infections. This includes middle ear infections, strep throat, pneumonia, traveler's diarrhea, and bound alternative intestinal infections it also can be used for variety of sexually transmitted infections, as well as chlamydia and gonorrhea infections. At the side of alternative medications, it's going to even be used for malaria. It may be taken by mouth or intravenously with doses once per day. It is on the world Health Organization's List of Essential Medicines, the safest and most effective medicines required in a very health system. It’s one in all the most usually prescribed antibiotics in children. Trim ox is on the market as a generic medication. Related Books: - Pharmaceutical, Drugs, Proteins Technology Handbooks Azithromycin alone and in combination with different medications is currently being studied for the treatment of coronavirus wellness 2019 (COVID-19). Currently, azithromycin has been used with hydroxychloroquine to treat certain patients with COVID-19. However, there are mixed reports of effectiveness once azithromycin was used at the side of alternative medications to treat other viral respiratory infections. Azithromycin also has been used to treat bacterial infections in hospitalized patients with COVID-19. A lot of information is required before any conclusions may be made regarding the possible advantages and risks of using azithromycin either alone or together with hydroxychloroquine in patients with COVID-19. Amoxicillin Trihydrate may be a hydrate that's the Trihydrate type of amoxicillin; a semisynthetic antibiotic, used either alone or together with potassium clavulanate (under the name Augmentin) for treatment of a variety of bacterial infections. It’s a role as an antibacterial drug and an antimicrobial agent. It contains an amoxicillin. Manufacturing Process The manufacturing process of Paracetamol is summarized in the following steps: -charge acetic acid to the reactor. -add p-nitro phenol as a starting material and iron powder as catalyst. -Heat to temp 80-90 ºC. -The reaction is exothermic and temp will rise to 130 ºC. -After slight cooling -Reflux the reaction at 118ºC for 3-4 hours. -Cool to 60 ºC. -Add methanol to the reaction. -Reflux for 1 hour. -distill the methanol and recycle. -Add water to the obtained cake. -And make a solution -Add activated carbon. -Filter -Dry the cake. -Pulverize the dry cake to get the Paracetamol fine powder. Applications:- Communicable Diseases Oncology Diabetes Cardiovascular Diseases Pain Management Respiratory Diseases Other Therapeutic Applications Role of Government towards API The coronavirus outbreak disrupting supply of active pharmaceutical ingredients (APIs) and medical devices from China to India, the government has come out with four schemes worth Rs 13,760 crore to encourage manufacturing of bulk drugs and medical devices in the country and their exports. On March 21, the Union Cabinet under the chairmanship of Prime Minister Narendra Modi had approved an expenditure of Rs. 9,940 crore and Rs. 3,820 crore for APIs and medical devices, respectively. The Cabinet also approved a scheme on promotion of bulk drug parks for financing common infrastructure facilities in three bulk drug parks with financial implication of Rs. 3,000 crore for next five years. The government will give grants-in-aid to states with a maximum limit of Rs. 1,000 crore per bulk Drug Park. Parks will have common facilities such as solvent recovery plant, distillation plant, power and steam units, common effluent treatment plant etc. The government further approved production linked incentive (PLI) scheme for promotion of domestic manufacturing of critical KSMs/drug intermediates and APIs in the country with financial implications of Rs. 6,940 crore for next eight years. Financial incentive will be given to eligible manufacturers of identified 53 critical bulk drugs on their incremental sales over the base year (2019-20) for a period of 6 years. Out of 53 identified bulk drugs, 26 are fermentation based bulk drugs and 27 are chemical synthesis based bulk drugs. Rate of incentive will be 20 per cent (of incremental sales value) for fermentation based bulk drugs and 10 per cent for chemical synthesis based bulk drugs. The PLI scheme will lead to expected incremental sales of Rs. 46,400 crore and significant additional employment generation over eight years. The drug industry has welcomed the incentives offered by the government to promote API units in India. Besides APIs, the Cabinet also approved the scheme for promotion of medical device parks in the country in partnership with the states. A maximum grant-in-aid of Rs. 100 crore per park will be provided to the states. It will have financial implications of Rs. 400 crore. The PLI scheme for promoting domestic manufacturing of medical devices will have financial implications of Rs. 3,420 crore for next five years. Medical device is a growing sector and its potential for growth is the highest among all sectors in the healthcare market. It is valued at Rs. 50,026 crore for 2018-19 and is expected to reach to Rs. 86,840 crore by 2021-22. India depends on imports up to an extent of 85 per cent of total domestic demand of medical devices. Union Cabinet scheme on Promotion of Bulk Drug Parks • The scheme on Promotion of Bulk Drug Parks for financing Common Infrastructure Facilities in 3 Bulk Drug Parks with financial implication of Rs. 3,000 crore for next five years. • Production Linked Incentive (PLI) Scheme for promotion of domestic manufacturing of critical KSMs/Drug Intermediates and APIs in the country with financial implications of Rs6,940 crore for next eight years. Details: Promotion of Bulk Drug Parks • Decision is to develop 3 mega Bulk Drug parks in India in partnership with States. • Government of India will give Grants-in-Aid to States with a maximum limit of Rs. 1000 Crore per Bulk Drug Park. • Parks will have common facilities such as solvent recovery plant, distillation plant, power & steam units, common effluent treatment plant etc. • A sum of Rs. 3,000 crore has been approved for this scheme for next 5 years. Production Linked Incentive Scheme • Financial incentive will be given to eligible manufacturers of identified 53 critical bulk drugs on their incremental sales over the base year (2019-20) for a period of 6 years. • Out of 53 identified bulk drugs, 26 are fermentation based bulk drugs and 27 are chemical synthesis based bulk drugs. • Rate of incentive will be 20 % (of incremental sales value) for fermentation based bulk drugs and 10% for chemical synthesis based bulk drugs. • A sum of Rs. 6,940 crore has been approved for next 8 years. Market Outlook Active Pharmaceutical Ingredient Market is valued at USD 172.69 Billion in 2018 and expected to reach USD 263.80 Billion by 2025 with the CAGR of 6.24% over the forecast period. The increasing incidence of chronic diseases, growing importance of generics, and the increasing uptake of biopharmaceuticals are some of the major factors driving the growth of the global APIs market. On the other hand, the unfavorable drug price control policies across various countries and the increasing penetration of counterfeit drugs are expected to restrain the growth of this market in the coming years. Related Projects: - Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates Drugs and over-the-counter (OTC) drugs. In 2019, the prescribed drugs segment is expected to account for the most important share of the APIs market. The demand for drugs falling under this class has increased significantly in recent years because of the rising prevalence of target diseases. Additionally, the most important share of the prescription drugs segment also can be attributed to the increased focus of innovator corporations on the development of specialty drugs and affordability of health care. The implementation of significant federal reforms to improve the affordability of healthcare, especially in the, us has expanded the consumption of each traditional and specialty medicine. Also, inflation has played a key role in enhancing revenue from the sales of prescription drugs, significantly specialty drugs. All these factors are collectively responsible for the large share of this phase. Based on the kind of drug, the APIs market can be classified into two segments prescribed. Manufacturer Insights On the basis of type of manufacturer, the API market has been segmented into merchant and captive APIs. Captive API command the most important share in 2019 because of simple availability of raw materials and intensive capitalization of major key players for the development of high-end manufacturing facilities. API is calculable to be the fastest-growing segment over the forecast period. The segment growth is driven by factors similar to high cost of in-house manufacturing of those molecules and rising demand for biopharmaceuticals. Related Videos: - Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Pharmaceutical Bulk Drugs Active Pharmaceutical Ingredient (APIs) are portions of any drugs that are biologically active in nature. The APIs have significant use in the manufacturing of effective and safe medicines. Depending on the drug’s administered dosage, the reactions and results take issue according to the requirement and use for specific treatment of diseases. Sure medicine are contained of over one kind of API. medicine are chosen primarily for his or her active ingredients to treat variety of chronic and infectious diseases similar to diabetes, cancer, arthritis, bone & joint infections, pneumonia, otitis, streptococcal pharyngitis, cellulites, and tract infections. However, the standard will vary widely from one whole to a different. Medicine are chosen primarily from active ingredients within the liquid or solid form like tablet or alternative throughout. Global Active Pharmaceutical Ingredient Market Dynamics The key issue for growth of worldwide Active Pharmaceutical Ingredient market is that the rise of demand for the new drug discovery for treatment of various chronic and infectious diseases like HIV, cancer, arthritis, bone & joint infections, hepatitis-B, Aids etc. across the world. According to WHO in 2018, the worldwide cancer burden has up to 18.1 million new cases as well as 9.6 million deaths across the world. Because of such rise within the cases of cancer, the new drugs discovery using the Active Pharmaceutical Ingredient has become essential. Recently in line with the American Chemical Society in 2019, there has been 48 new drugs has been approved by the fad U.S. out of that 11 for new cancer treatments with the innovative molecular pharmaceutical ingredients. However, the Active Pharmaceutical Ingredient market is hampered by would like for prime investment with huge capital demand for research and developments. Moreover rising health cautiousness among the people with technological advancement immense investment for launching of recent drugs and biological products, acquisitions, collaborations, and regional growth can provide huge opportunity for Active Pharmaceutical Ingredient market. For instance in 2019, Raquel has been acquired by Merck & Co. for roughly around USD 2.7 billion in cash, for making cancer drug using Active Pharmaceutical Ingredient with the most recent small-molecule-focused. Expansion of Manufacturing Facilities Creating Lucrative Opportunities for Market Growth Majority of specialty API companies are increasing their manufacturing facilities for specialty active pharmaceutical ingredients (API) to take care of or gain market share. Substantial investments within the growth of approved specialty active pharmaceutical ingredients (API) is one in all the most important factors among key players in the specialty active pharmaceutical ingredients (API) market. For instance, in early 2020, Wuxi STA opened oligonucleotide API manufacturing facility in Changzhou, China to cope up with the increasing demand. In 2018, Cordon Pharma expanded operations with new commercial oligonucleotide active pharmaceutical ingredients (API) manufacturing capabilities at its FDA inspected Colorado facility. The emergence of COVID-19 has brought the world to a standstill. We perceive that this health crisis has brought an unprecedented impact on businesses across industries. However, this too shall pass. Rising support from governments and several companies will help within the fight against this highly contagious disease. There are some industries that are struggling and some are thriving. Overall, almost each sector is anticipated to be impacted by the pandemic. Focus on healthcare to drive the active pharmaceutical ingredients market The spending on healthcare has grown at a rapid pace in recent years and it increased at a CAGR of 6.92% between the years 2003 and 2013. The healthcare spending growth was significantly higher than the population growth rate that grew at a CAGR of 1.22% for the same period. The per capita healthcare spending rose from just under US$ 600 in 2003 to above US$ 1000 in 2013, at an average CAGR of 5.62%. The focus on healthcare spending was observed to be a global phenomenon and this directly benefited the active pharmaceutical ingredients market. Related Videos: - Active Pharma Ingredients (API) - Global Market Estimated to Reach US$ 21.9 billion by 2023 Investment Opportunities in API Bulk Drugs & Intermediates Manufacturing Unit Production of Paracetamol (Acetaminophen), bulk pharmaceutical active ingredient Investment Opportunities in APIs KSMs Drug Intermediates Bulk Drug Industries Manufacturing Business Ideas in Pharmaceutical Industry Key Players Pfizer, Inc. (US), Novartis AG (Switzerland), Sanofi (France), Boehringer Ingelheim (Germany), Bristol-Myers Squibb (US), Teva Pharmaceutical Industries Ltd. (Israel), Eli Lilly and Company (US), GlaxoSmithKline plc (UK), Merck & Co., Inc. (US), AbbVie Inc. (US), F. Hoffmann-La Roche Ltd. (Switzerland), and AstraZeneca plc (UK). Sun Pharmaceutical Industries Ltd. Tags:- #Activepharmaingredients #pharmaingredients #IndianPharma #medicineingredients #paracetamolingredients #amoxicillinTrihydrate #Azithromycin #COVID19 #Paracetamol #coronavirus #CoronavirusBusiness #COVID2019 #CaronaBUSINESS #lockdownbusiness #businessinlockdown #coronavirusbusiness #Entrepreneurs #covid19business #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #industrialproject #entrepreneurindia #startupbusiness #startupbusinessideas #businessestostart #startupideas #startupbusinesswithnomoney #businessstartupindia #API
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Disposable Nitrile Gloves (Powder Free)

Nitrile gloves are a type of disposable gloves made from synthetic rubber, this means there is no risk of latex allergies. They are the most popular gloves type in our range and offer superior strength, dexterity and resistance to oils and aqueous chemicals in comparison to vinyl or latex. For these reasons, they are often used in the medical, laboratory and manufacturing industries. Nitrile gloves are a great compromise between latex and vinyl. Our Blue Nitrile gloves offer protection from bodily fluids providing a barrier that prevents infection, cross-infection or cross-contamination. Tests revealed that Nitrile gloves are three times more puncture-resistant than rubber gloves. Nitrile gloves protect the wear from a range of chemicals and blood borne pathogens. Our Nitrile Gloves go through an extra process of chlorinating which ease donning. Made from allergy safe compound that feels like latex, but stronger, cheaper and more comfortable. Nitrile exam gloves are the material of choice for many professional users because of its cut resistance, chemical resistance, cost, allergy safe and cleanliness. Indian glove market is growing at 15% while the demand for examination gloves has been rising by 20%per annum. St Mary’s is the largest supplier of centrifugal latex under the brand Cenex, a crucial raw material for manufacturing rubber dipped goods like gloves, balloons, condoms and rubber bands Impact of COVID-19 Impact of COVID-19 on the Worldwide Disposable Gloves Industry to 2025 The global disposable gloves market is highly competitive. Innovations, sustainability, and regulatory adherence constitute three pillars for the disposable gloves market success. Factors such as the growth in the aging population, awareness of infection prevention standards, and expansion of healthcare infrastructure are the major factors contributing to market growth. However, growth in medical tourism, advancement in surgical techniques and medical equipment, increase in public and private investments and government initiatives, the onset of pandemic diseases, and the rise in chronic diseases are other drivers stimulating the demand for disposable gloves. The demand for medical gloves has surged up rapidly in countries such as the UK, China, the US, India, Iran, and Italy due to the outbreak of the COVID-19 pandemic. The disease has increased the importance of hygiene among individuals. The market landscape of disposable gloves, which are fast turning into retail commodities, is expected to be accelerated. When a person touches an object/surface contaminated by COVID-19 infected person, and then touches his own eyes, nose, or mouth, he may get exposed to the virus. Although this is not thought to be a predominant mode of transmission, care should be exercised while handling objects/surface potentially contaminated by suspect/confirmed cases of COVID-19. India disposable gloves market generated $303 million in 2017, and is projected to reach $760 million by 2025, growing at a CAGR of 12.4% from 2018 to 2025. In terms of volume, the market is growing at a CAGR of 8.3% from 2018 to 2025. Few Indian major players are as under Honeywell International (India) Pvt. Ltd. London Rubber India Ltd. Mallcom (India) Ltd. Sara Healthcare Pvt. Ltd. T T K Biomed Ltd. Wellness Forever Medicare Pvt. Ltd.
Plant capacity: Disposable Nitrile Gloves (Powder Free) : 500,000.0 Pcs. / dayPlant & machinery: Rs 1321 lakhs
Working capital: -T.C.I: Cost of Project : Rs 2925 lakhs
Return: 30.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

India Beer Market- Industry Size, Share, Drivers, Trends, Analysis and Forecasts (2019-2024)

India Beer Market- Industry Size, Share, Drivers, Trends, Analysis and Forecasts (2019-2024) The report titled India Beer Market- Industry Size, Share, Drivers, Trends, Analysis and Forecasts (2019-24) released by Niir Project Consultancy Services, provides a comprehensive analysis on Indian Beer Market. The report begins with a brief insight into the scenario of the global beer industry giving details about global beer consumption patterns and then proceeds to analyze the Indian scenario. India has one of the lowest consumption levels of beer in the world. Currently India consumes ~2% of the total world consumption and has the potential to match, the world leader, China thus opening a vast pool of opportunities for the brewing companies. The report gives a snapshot of the manufacturing process of the beer starting from malting till the end of process at bottling. The beer segment can be categorized either by fermentation process (Ale & Lager) or by alcohol by volume content (Mild & Strong). Indian industry is majorly dominated by strong beer segment but new flavorful mild beers are finding their feet on the ground. Strong beer has alcohol contents of >5% and mild beer contains <5% of alcohol. The report analyzes the beer market in profundity by covering data points like industry growth drivers, emerging trends coupled with SWOT analysis of the market and the regulatory framework surrounding the sector. Related Projects: - Alcoholic and Non-Alcoholic Beverages Beer is being increasingly accepted as a social drink and the urban youth in particular flavours it as the preferred alcoholic beverage. Indian market although dominated by hard liquor, consumers are now looking for choices away from whisky. It is not just the male populace that is enamored by beer but female population has started equally enjoying beer. One of the drivers for the beer industry would be the rising concept of online alcohol delivery portals. A sudden spurt of alcohol delivery portals not only indicate the rising acceptability of alcohol in the country but also the much evolving consumer base. The consumers who were unable to go to a liquor store earlier and purchase their preferred drink, are now in a sweet spot with home deliveries. The Indian beer market has been experiencing the trend of microbreweries and some exclusive beer outlets. Such emergence has contributed in increased awareness and easy availability of beer in Indian markets. Also, a rage in the industry is the craft beer boom. Indian market is swamped with a number of craft beers with new and innovative flavors. Beer consumers are now a days shifting their preferences from regular mainstream bottled beers to artisanal brews, new fresh flavors and unique local ingredients. A large number of microbreweries are currently selling their bottled craft beer in market and are gaining a firm foot on the ground. The surge in craft beer sales is intended to drive the beer industry sales to the bubbly top! One of the recent trends to hit the industry is emergence of 0% beer. Since the consumer profile for beer industry in India is evolving so are their preferences and hence the emergence of new varieties. Consumers are now increasingly opting for drinks that are low on sugar, carbs and hence the calories. In the view of increasing demand for such drinks, a lot of brewers have come up with their versions of 0% beer to tap the demand from this segment. With a ban on direct advertising of alcoholic beverages in India, companies nowadays are using innovative concepts to market their products. Indian market players have been forced to be more innovative in their approach to engage the consumers, branching out into concepts such as non-alcohol brand extensions and surrogate advertising and alignment with sport. Also, with the emergence of more health-conscious consumer class, the health benefits of drinking beer, in moderation, has come into the light. Indian alcohol distribution structure is complex and generally varies from state to state. Liquor is a state subject in India and consequently, the liquor industry is subjected to very strict distribution controls by the state governments. The distribution structure consists three types of market- Government controlled, open market and auction market. States like Assam, West Bengal and Pondicherry are states with open market States like Tamil Nadu and Kerala fall under the complete regulation of government whereas states like Haryana, Chandigarh and Punjab fall under the auction market structure. The Indian alcohol industry is characterized by high entry barriers due to government regulations. Related Books: - Alcohol and Alcohol Based Industries, Alcoholic and Non Alcoholic Beverages The report further scrutinizes the Indian beer industry with the help of SWOT Analysis. The report elucidates the strengths of the industry in being recession proof in view of the fact that the Indian alcohol consumption generally remains unfazed by the economic downturn in the nation. Also growing Indian population serves as a ready customer base for the beer industry. According to United Nations India is poised to overtake China as the world's most populous nation around 2027. Such population growth puts the industry in a comfortable spot. Indian demographics are bound to benefit the industry in the long term with large number of people under drinkable age. With alcohol consumption no longer a taboo in India with increasing people in drinkable age, Indian beer industry surely finds itself in the ‘bubbly’ spot. Also, the rising levels of urbanization, escalating disposable incomes and growing affluent class provides enormous opportunities for the players to tap. It is estimated that the urban population in India will rise to ~38% of the total population by 2025. There has been a shift in the spending pattern of the Indian consumers due to increase in their purchasing power. Related Market Research Report: https://www.entrepreneurindia.co/market-research-report Rising incomes are resulting in increasing discretionary expenditures. Since expenditure on alcohol consumption is discretionary in nature, beer market is bound to benefit from such paradigm shift. However, the industry faces challenges in the form of ban on direct advertising and derisory state of market infrastructure. The industry is also highly taxed and regulated and struggles with multiplicity of taxes and lack of uniformity in the regulations varying from state to state. Industry is also faced with ban on direct advertising which further elevates the industry’s problems. Industry further faces challenges in the wake of rising competition in the sector. Complementary to the changing industry dynamics, beer segment has seen a high spurt in the players operating in the market which has worsened the competition for existing players. With global bigwigs like Carlsberg, Anheuser-Busch and Heineken entering the country, the competitive landscape of the domestic beer market has changed considerably. The industry also faces moral restrictions due to religious influence. It is still considered to be a forbidden, taboo drink in some parts of the society, detrimental for the Indian culture. Drinking alcohol is culturally not accepted in most parts of India. The report further analyses the demand supply situation and foreign trade of beer in the nation along with industry size forecasts. The outlook for Indian beer industry remains buoyant with stable growth rates and all growth triggers like the rising acceptability of beer as a social drink, popularity of microbreweries & craft beers and evolving consumer preferences in place for a new growth wave. Also, the Indian growth story holds up the expansion of the beer industry. Favorable demographics, rising disposable incomes, urbanization and rising acceptability of drinking have brought the winds of change for the industry. We expect the industry to reach consumption levels of 3584 million liters or 459 million cases by 2024. This estimated market size of 459 million cases is a conservative estimate the industry has all triggers in place for exceeding the projected growth rate. Key Players SABMiller plc Anheuser-busch InBev Carlsberg, United Breweries Ltd Heineken NV Carlsberg breweries A/S Cerana Beverages Arbor Brewing Company India Gateway Brewing Company Anheuser Boston Beer Grupo Modelo Key Words: Indian beer industry ,Market overview, Market size, forecasts, growth drivers, emerging trends, SWOT analysis, Craft beer, Microbreweries, Beer pubs , Kingfisher, Budweiser, Corona, Haywards 5000, United Breweries, SABMiller India, Carlsberg India, Anheuser-Busch InBev, Malt, Barley, Drinking, Taboo, Per Capita Consumption, discretionary spends, beer consumption, mild beer, strong beer, pale, ale, lager, bira, kati patang, white owl, social acceptability, Regulated, Highly taxed, Open market, Auction Market, Government controlled market, Premium beer, strong beer, lager, ale, Tuborg, favorable demographics, Urbanization, affluent class, corona fee, demand, supply, production, export, import, market outlook, IMFL, India, alcohol Market Research Reports, India and Global Industry Analysis ,Market Trends, Market Insight, Market structure, Market outlook Indian Industry Size, Share, Trends, Analysis and Forecasts report, sector Growth Driver, company profiles, industry analysis,
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start your own Business in Hydrated Lime (Calcium hydroxide) Production from Limestone (Calcium Carbonate).

Start your own Business in Hydrated Lime (Calcium hydroxide) Production from Limestone (Calcium Carbonate). Most Profitable Opportunities for Startups in Chemical Industry. The term “hydrated lime” is widely used to describe a powdered calcium hydroxide product created by reacting quicklime with a controlled more than water. The product is essentially dry and generally contains not up to 1% of un-reacted water. The method is called “hydration” and will be differentiated from “slaking” that involves the production of a dispersion of calcium hydroxide in water. However, the expression “slaked lime” is used as a generic term for hydrated lime, milk of lime and lime putty. Related Projects: - Chemicals (Organic, Inorganic, Industrial) Projects An estimated 10 to 15% of the quicklime produced in developed countries is born-again in to hydrate lime and therefore the percentage is also higher in countries that don't have a large steel industry. Because hydrating plants are comparatively complex and might be fed with surplus grades of quicklime, there are relatively few of them and that they are normally located at a lime works. Whereas the chemical reactions involved within the formation of hydrated lime are simple, the physical chemistry is complex. Some of industrial uses of Hydrated Lime are: Manufacturing of Bleaching Powder. Process Water Demineralization Waste Water Neutralization. Neutralization of Acidic effluents Fluxing or Clarifying. Drying of mud or sludge. Stabilization of hazardous waste. Dehairing of Hides in Tanneries. Flue gas Desulphurization Calcium Hypochlorite Bleaching of Paper pulp. Market Outlook The national demand estimate for hydrated lime in excess of 100,000 MT per annum and the estimated total supply figure is less than 35,000 MT per annum with most of the demand been met through importation. The global hydrated lime market size will grow by 31.24 MMT during 2018-2022. In terms of value, the global lime market is anticipated to expand at a CAGR of ~ 6% during the forecast period, and reach a value of US$ ~65.4 Bn by 2027. Related Books: - Chemical Technology (Organic, Inorganic, Industrial), Fine Chemicals The Asia Pacific is that the leading region in terms of production. The region is expected to continue having a healthy rate within the coming back years as well. It’s among the fastest-growing lime market. The lime market within the region is boosted by the rapidly growing housing industry within the region, particularly China and India. The booming construction industry is supporting the demand growth for hydrated lime. The region additionally has significant demand growth for the steel industry, which successively is boosting the demand for lime. The increasing investments by the Chinese government, as well as private firms within the construction and infrastructure industries, have boosted the demand for lime within the Asia Pacific. The growing demand for mineral production within the region is also expected to drive the demand for the product. China is likely to be the most important lime producer as well as consumer within the region in the coming years. Projects- Project Reports & Profiles Lime has been widely utilized in various building and construction techniques for over 5,000 years. The durability, resilience, and water-resistant properties of lime build it an ideal material for construction activities, especially among people who involve using natural materials. Lime is one in every of the very few mineral derivatives which will be used to manufacture steel – an element that has contend an imperative role in its high uptake for steel manufacturing, thus, aiding the growth of the lime market, worldwide. Whereas quicklime is extensively used as a flux agent to urge eliminate impurities in steel, calcium hydrate finds application across the construction sector around the world. Related Videos:- Chemicals (Organic, Inorganic, Industrial) High Demand for Lime in Metallurgical Applications The steel industry is a major consumer of lime. Around 50% of the total production of lime is consumed in the metal manufacturing industry. Lime is utilized as a flux for removing impurities such as silica, phosphorus, and sulfur. Industrial production of lime helps achieve quality steel, primarily in terms of purity required in modern steel applications. Lime plays a vital role in the production of non-ferrous metals as well. Lime can be utilized to treat copper ore; extract uranium; and recover gold as well as silver. Lime is employed in producing alumina and magnesia to manufacture aluminum and magnesium, respectively. Market Research Reports :- Market Research Reports, India and Global Industry Analysis ,Market Trends, Market Insight, Market structure, Market Outlook, Indian Industry Size, Share, Trends, Analysis and Forecasts report, Sector Growth Driver, Company Profiles Thus, increasing demand for steel and other metals from automotive and other manufacturing industries across the globe, including developing economies such as China, India, and Brazil, is anticipated to drive the demand for lime for use in metallurgical applications during the forecast period. Key Players The global hydrated lime market expected to be fragmented throughout the forecast period. Some of the market participants identified across the value chain of the global hydrated lime market include Graymont Limited, Lhoist, SIBELCO, and NIKI Chemical industries, McGean-Rohco Inc., KIMTAS, CARMEUSE, Boral Limited, Omya Australia Pty Ltd. and United States Lime & Minerals, Inc., among others. Tags:- #HydratedLime #Limepowder #calciumhydroxide #Limeindustry #limebusiness #LimeStoneProduction #limestoneproject #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #industrialproject #entrepreneurindia #startupbusiness #startupbusinessideas #QuickLime #chemicalindustry
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Lucrative Business Opportunities Production of Sodium Borohydride (sodium tetrahydridoborate) Using Trimethyl Borate.

Lucrative Business Opportunities Production of Sodium Borohydride (sodium tetrahydridoborate) Using Trimethyl Borate. Business Ideas in Chemical Industry Sodium borohydride is a white to grayish crystalline powder. It is decomposed by water to form sodium hydroxide, a corrosive material, and hydrogen, a flammable gas. The heat of this reaction may be sufficient to ignite the hydrogen. The material itself is easily ignited and burns vigorously once ignited. It is used to make other chemicals, treat waste water, and for many other uses. Sodium borohydride is an inorganic sodium salt and a metal tetrahydridroborate. Sodium borohydride (NaBH4) is the most commonly available borohydride, synthesized by reacting methyl borate with sodium hydride in mineral oil. It is employed as a precursor for producing other metal borohydride. Various approaches for qualitative and quantitative monitoring of sodium borohydride have been explained the potential of NaBH4 to store as well as generate hydrogen for fuel cells has been investigated. Projects- Project Reports & Profiles Preparation Sodium borohydride is prepared by reacting sodium hydride with trimethyl borate at about 250°C: 4 NaH + B (OCH3)3 ? NaBH3 + 3NaOCH3 Also, sodium borohydride can be made by passing diborane, B2H6, through a solution of sodium methylate, NaOCH3, in methanol: 2B2H6 + 3NaOCH3? 3NaBH3 + B (OCH3)3 Alternatively, diborane may be be passed through a solution of sodium tetramethoxyborohydride at low temperatures: 3 NaB (OCH3)3 + 2B2H6 ? 3NaBH3 + 4B (OCH3)3. Uses Sodium borohydride (NaBH4) is a versatile reducing agent used in a number of industrial processes. Major applications include organic and pharmaceutical synthesis, wastewater treatment, and paper pulp bleaching. Sodium borohydride plays such a significant role in organic synthesis. It is a good reducing agent which has stable performance and selective reduction. It can be used as the reducing agents of aldehydes, ketones and acid chlorides; also as foaming agent for plastic materials, hydrogenating agent of making dihydrostreptomycin, intermediate of making potassium borohydride, raw materials in synthesizing borane, as well as the treatment agent of paper industry and mercury-containing waste water. Related Projects: - Chemicals (Organic, Inorganic, Industrial) Projects Sodium borohydride provides organic chemists a very convenient and mild means for reduction of aldehydes and ketones. Before this, people usually use metal/alcohol approach to reduce carbonyl compound. Sodium borohydride enables the reduction of carbonyl of aldehydes and ketones under very mild conditions to produce primary alcohols and secondary alcohols. Reduction procedure is as below: First dissolve the substrate in a solvent (typically methanol or ethanol), then cool with an ice bath. Finally add sodium borohydride powder to the mixture until the reaction is completed. The reaction process can be monitored by thin layer chromatography. If the solvent is not an alcohol, we need to additionally supply methanol or ethanol along with the reaction. Sodium borohydride is a reducing agent with medium strength, and thus exhibiting good chemical selectivity. It only reduces active aldehyde and ketone carbonyl group, and does not react with the ester, amide. Production Methods Sodium borohydride boric acid ester method: Pour boric acid and appropriate amount of methanol to distillation kettle, slowly heated at 54 °C for total reflux 2h. Then collect the azeotropic liquid of methyl borate and methanol solution. After treatment of azeotropic liquid by sulfuric acid, using fine distillation can yield relative pure product. Feed sodium hydrogen obtained with reaction between hydrogen gas and sodium into the condensation reaction tank. Heat with stirring to about 220 °C and then begin to add boric acid ester. Stop heating once the temperature reaches 260 °C; Keep the feed temperature below 280 °C, continue the stirring after the addition of boric acid ester to ensure the thorough reaction. After the completion of reaction, cool the temperature below 100 °C, centrifuge to obtain a condensation product pellet. Add an appropriate amount of water to the hydrolysis reactor and slowly transfer the filter pellet into the hydrolysis reactor, keep the temperature lower than 50 °C, heat to 80 °C after the complete of adding the filter pellet. Centrifuge and separate, transfer the hydrolysis solution to stratification vessel to keep still for 1h for automatic layering. The hydrolysis solution in the lower layer corresponds to sodium borohydride. The reaction formula is as below: H3BO3+3CH3OH?B (OCH3)3+3H2O 2Na+H2?2NaH 4NaH+B (OCH3)3?NaBH4+3CH3ONa Related Books: - Chemical Technology (Organic, Inorganic, Industrial), Fine Chemicals Market Outlook In the textile industry, Sodium Borohydride used in combination with sodium bisulfite, and it is used instead of replacement for Sodium Hydrosulfite in vat dyeing, indigo dyeing, color stripping, reductive clearing, machine cleaning and many other applications where a stable, environmentally desirable reducing agent is required. In organic chemical purification, Sodium Borohydride improve the color, odor and stability of organic chemicals. Sodium Borohydride works by reducing ketones, aldehydes, peroxides and metal impurities that can lead to color, odor and product instability. The global Sodium Borohydride market is valued at 536.3 million USD in 2020 is expected to reach 881.9 million USD by the end of 2026, growing at a CAGR of 7.3% during 2021-2026. Pulp & Paper is expected to be the major segment during the forecast period, however pharmaceuticals is anticipated to grow at highest CAGR compare to other end-use segments. Increase in research & development activities in pharmaceutical for inventing different medicinal drugs and usage of sodium borohydride as hydrogen carrier in fuel cell is estimated to offer major opportunities to the sodium borohydride market in the next few years. Sodium borohydride is an inorganic compound sold as a white crystalline powder or in an aqueous solution. This compound is widely used in laboratories and other technical applications. The function of sodium borohydride is to act as a polyvalent reducing agent. Related Videos:- Chemicals (Organic, Inorganic, Industrial) Sodium Borohydride Market Drivers: The sodium borohydride market is increasing due to the growing demand of the pharmaceutical industry, which is an important raw material for the manufacture of various pharma products. The intensification of antibiotic research and development efforts is a reason to raise awareness in the health sector. These are the determining factors that will boost the demand for sodium borohydride in the coming years. In addition, the demand for innovative technologies such as hydrogen on demand has increased significantly, offering huge opportunities for the sodium borohydride market in the coming years. In addition, the expansion of the pulp and paper industry that requires high quality sodium borohydride has helped increase market revenues. Market Research Reports :- Market Research Reports, India and Global Industry Analysis ,Market Trends, Market Insight, Market structure, Market Outlook, Indian Industry Size, Share, Trends, Analysis and Forecasts report, Sector Growth Driver, Company Profiles The product is also used in the synthesis of gold nanoparticles, which are used in various fields such as electron microscopy, chemotherapy, radiotherapy, medical research etc. Gold nanoparticles industry is expected to grow by over 25% CAGR in the forecast period which will drive the sodium borohydride market. Key Players Examples of some of the key players identified across the value chain of the Global Sodium Borohydride market are: Zhangjiagang City Jinyuan Biochemical Co., Ltd, Jiangsu Huachang Group Co., Ltd, Shandong Guobang Pharmaceutical Co., Ltd, JSC Aviabor, Vertellus Holdings LLC, The Dow Chemical Company, Nantong Hongzhi Chemical Co., Ltd, Montgomery Chemicals, Kemira, Demosha Chemicals Pvt. Ltd, Finar Ltd, Gulbrandsen Chemicals Pvt. Ltd, Gulshan Chemicals Ltd, Tags:- #sodiumborohydride #SodiumHydride #TrimethylBorate #ChemicalIndustry #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #industrialproject #entrepreneurindia #startupbusiness #startupbusinessideas #startupideas
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing of Ascorbic Acid. Opportunities for Entrepreneurs to Start Own Business in Vitamin C Industry.

Manufacturing of Ascorbic Acid. Opportunities for Entrepreneurs to Start Own Business in Vitamin C Industry. Ascorbic Acid could be a natural water-soluble vitamin (Vitamin C). Ascorbic acid could be a potent reducing and antioxidant agent that functions in fighting bacterial infections, in detoxifying reactions, and within the formation of scleroprotein in fibrous tissue, teeth, bones, connective tissue, skin, and capillaries. Found in citrus and other fruits, and in vegetables, vitamin c cannot be produced or hold on by humans and should be obtained within the diet. Project Reports:- Project Reports & Profiles Ascorbic Acid (vitamin c) Injection is a sterile solution. Every ml contains: ascorbic acid (vitamin c) 250 mg and Edetate Disodium 0.025% in Water for Injection sq. Prepared with the help of Sodium bicarbonate. Sodium hydroxide and/or hydrochloric acid could are used to adjust ph. Uses Ascorbic acid (vitamin C) is used to prevent or treat low levels of vitamin c in folks that don't get enough of the vitamin from their diets. Most of the people who eat a normal diet do not want additional ascorbic acid. Low levels of vitamin c may end up in a condition called scurvy. Scurvy could cause symptoms similar to rash, muscle weakness, joint pain, tiredness, or tooth loss. Vitamin C plays an important role within the body. It’s needed to take care of the health of skin, cartilage, teeth, bone, and blood vessels. It is also used to protect your body's cells from damage. It’s referred to as an antioxidant. Ascorbic Acid (vitamin C) is used to forestall or treat low levels of vitamin c in people that don't get enough of the vitamin from their diets. Most people who eat a normal diet do not want extra ascorbic acid. Low levels of vitamin c may end up in a condition called scurvy. Scurvy could cause symptoms similar to rash, muscle weakness, joint pain, tiredness, or tooth loss. Ascorbic Acid might also be used with different vitamins for a certain status (macular degeneration). Ascorbic Acid is on the market under the following different whole and different names: Cenolate, and vitamin c. It is used to treat or prevent vitamin C deficiency. It is used to treat scurvy. Tablets, chewable tablets, soluble tablets Dietary Supplement Urinary Acidification Scurvy Related Projects:- Chemicals (Organic, Inorganic, Industrial) Projects Significance Vitamin C is an essential nutrient for certain animals as well as humans. The term vitamin c encompasses several vitamins that have vitamin c activity in animals. Ascorbate salts such as sodium ascorbate and calcium ascorbate are utilized in some dietary supplements. These release ascorbate upon digestion. Ascorbate and ascorbic acid are both naturally gift within the body, since the forms interconvert per ph. Oxidized forms of the molecule similar to dehydroascorbic acid are converted back to ascorbic acid by reducing agents. Vitamin C functions as a cofactor in many enzymatic reactions in animals (and humans) that mediate a variety of essential biological functions, together with wound healing and albuminoidal synthesis. In humans, vitamin c deficiency leads to impaired collagen synthesis, contributing to the lot of severe symptoms of scurvy. Another biochemical role of vitamin c is to act as an antioxidant (a reducing agent) by donating electrons to various enzymatic and non-enzymatic reactions. Doing so converts vitamin c to an oxidized state - either as semi dehydroascorbic acid or dehydroascorbic acid. These compounds are often restored to a reduced state by glutathione and NADPH-dependent enzymatic mechanisms. In plants, vitamin c may be a substrate for ascorbate peroxidase. This enzyme utilizes ascorbate to neutralize excess hydrogen peroxide (H2O2) by converting it to water (H2O) and oxygen Sources of Ascorbic acid Ascorbic acid is widely distributed in contemporary fruits and vegetables. It’s present in fruits like orange, lemons, grapefruit, watermelon, papaya, strawberries, cantaloupe, mango, pineapple, raspberries and cherries. It’s conjointly found in inexperienced leafy vegetables, tomatoes, broccoli, green and red peppers, cauliflower and cabbage. Most of the plants and animals synthesize ascorbic acid from D-glucose or D-galactose. A majority of animals turn out relatively high levels of ascorbic acid from glucose in liver but, guinea pigs, fruit eating bats, apes and humans cannot synthesize ascorbic acid to the absence of the protein L-gulonolactone oxidase. Hence, in humans ascorbic acid has got to be supplemented through food and or as tablets. Market Research Report- Market Research Reports Ascorbic acid could be a labile molecule, it may be lost from foods during cooking/processing even though it has the ability to preserve foods by virtue of its reducing property. Synthetic ascorbic acid is on the market during a wide variety of supplements viz., tablets, capsules, chewable tablets, crystalline powder, effervescent tablets and liquid form. Buffered ascorbic acid and esterified variety of ascorbic acid as ascorbic palmitate is additionally on the market commercially. Both natural and synthetic ascorbic acid are chemically identical and there are not any known differences in their biological activities or bio-availability. Market Outlook The Ascorbic Acid market is projected to grow at a rate of 5.2% from USD 1.04 Billion in 2019 to reach USD 1.63 Billion by 2027. Increasing health awareness, wide application base and rising demand from the pharmaceutical and food & beverages industry are the key factors that have paved way for the growth of the global Ascorbic Acid market. The paradigm shift from clean-label food and beverage products to dietary supplements has led to the emergence of many manufacturers offering clean-labeled vitamin C supplements to consumers seeking antioxidant support for immune health through supplements. As a result of this, the demand for ascorbic acid has increased in the pharmaceutical and healthcare industry. Two grades of ascorbic acid are available in the market, viz. food &pharmaceutical and industrial. On the basis of application, the global ascorbic acid market has been segmented into six segments – food & beverage, pharmaceutical, chemical, personal care, agriculture and others. Superior Functional Attributes of Ascorbic Acid to Propel Market Growth The global ascorbic acid market is expected to witness profitable growth within the coming back years, because of the significant demand from various end-use industries like chemical, food & beverage, cosmetics, agriculture, pharmaceutical, and others. Shifting preferences towards healthy foods, as well as nutrition supplements, are contributing to the growing prominence of vitamin C/ascorbic acid in various applications, such as in skin products, healing injuries and hindrance of infections and to improve the absorption of iron from food, reduce the chance of chronic diseases, enhance immune health, and control blood pressure. Related Projects: - Chemicals, Biotechnology, Enzymes, Bio Fertilizer, Vermiculture, Vermicompost Chemical & Allied Industries and Alcohol Projects Additionally, ascorbic acid is required for the growth, development, and repair of all body tissues and to carry out body functions such as the creation of collagen and maintenance of cartilages, bones and teeth. As per health expert recommendations, ascorbic acid is considered as one of the safest and most beneficial nutrients, which in turn is expected to drive the world ascorbic acid market with a healthy growth rate during the forecast period. Global Ascorbic Acid Market: Key Trends The market is expected to grow as growing vitamin deficiency concerns, lack of healthy natural agricultural produce, changing lifestyle is expected to drive demand for the worldwide Ascorbic acid market. The market is additionally expected to receive a lift from cost-effective manufacturing in China and Asia-Pacific. Demand for ascorbic acid is additionally growing as a substitute for low-calorie sweetener. Ascorbic acid has been traditionally involving higher fertility in various cultures round the world. Growing analysis proves that there is a correlation between supplement intakes and higher sperm count. Ascorbic acid also can emerge as an answer to infertility within the close to future. This can be a significant opportunity for market players as ascorbic acid supplements will help a smokers and different unhealthy individual keep healthy at very little further value in the near future. Ascorbic acid market is predicted to grow, because the acid is increasing being used as an artificial additive. Newly introduced EU regulations and FDA approval for higher quantities in diets is expected to become a significant boost for the market. Related Books: - Chemical Technology (Organic, Inorganic, Industrial), Fine Chemicals The growing demand for skincare products is also expected to drive the worldwide ascorbic acid market. Concerns over global warming, increased risks of skin cancers and different ailment is expected to drive various segments in cosmetic segment. Ascorbic acids and its salts facilitate hamper skin deterioration. Its positive impact on aging and wrinkles is expected to drive the market. The factors that are taking part in a major role within the growth of vitamin c (Ascorbic Acid) Market are rising demand for potassium, Ca and Na salts of ascorbic acid as an antioxidant food additive. On the opposite hand, price fluctuations and uncertain raw material supply are the factors restraining overall market growth. Key dynamics Ascorbic acid finds various applications within the food as well as pharmaceutical sectors. Within the food and beverage business, ascorbic acid is used as a protein supply in various food items. The growing demand for food and beverage products from emerging economies, similar to India and China, is expected to drive the concerned market throughout the forecast period. This growth in population is anticipated to make a large demand for food and beverage products, which, in turn, can drive the worldwide ascorbic acid market throughout the forecast period. The intake of vitamin c has doubled within the previous few decades because of growing awareness about health edges of vitamin c. ascorbic acid could be a smart source of vitamin c. As a results of these factors, the worldwide ascorbic acid market is expected to witness lucrative growth throughout the forecast period. Scope of the Global Vitamin C (Ascorbic Acid) Market The biggest consumer of this food additive is food and beverage industry, which counted about 60%; pharmaceutical industry count about 30% of the total demand. The price of ascorbic acid has increased steadily for several reasons. Factories in China that produce ascorbic acid are seriously considering price increases. Prices began to increase substantially. Ascorbic acid factories are underfunded due to the low price in recent years, resulting in a strong desire to raise prices. the Vitamin C (Ascorbic Acid) in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This categorizes the market based on manufacturers, regions, type and application. Related Videos:- Chemicals (Organic, Inorganic, Industrial) Key Players in the Global Ascorbic Acid Market The global ascorbic acid market some of the major players in the ascorbic acid market across the world, such as Sigma-Aldrich Corporation (Merck), Koninklijke DSM N.V., Northeast Pharmaceutical Group Co., Ltd., CSPC Pharmaceutical Group Limited, MUBY CHEMICALS, Shandong Luwei Pharmaceutical, North China Pharmaceutical Co. Ltd, Glanbia Nutritionals China (Suzhou) Co., Ltd, LabChem Inc., and China BBCA Group Corporation, Merck KGaA, Koninklijke DSM N.V., Northeast Pharmaceutical Group, Shandong Luwei Pharmaceutical, Foodchem International Corporation among others. Tags:- #ascorbicacid #pharmaceutical #vitaminc #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #industrialproject #entrepreneurindia #startupbusiness #Chemicalindustry #SodiumAscorbate #startupideas
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Market Research Report on India Active Pharmaceutical Ingredient (API)

Market Research Report on India Active Pharmaceutical Ingredient (API) Market, Growth Rate, Covid-19 Impact, Economic Impact, Size, Share, Trend, Drivers, Competitive Landscape, Opportunity, Limitations, Technological Landscape, Regulatory Framework, PESTEL Analysis, PORTER’s Analysis, Forecast upto 2027 Market by Manufacturing Process (Captive Manufacturing, Contract Manufacturing), By Type of Synthesis (Synthetic, Biotech), By API Formulation (Generic API, Innovative API), By Application (Cardiovascular Disease & Hematopoietic System, Central Nervous System, Anti-infectives, Respiratory, Gastrointestinal Disorders, Urology, and Others and By Region (North India, South India, West India, and East India) The India API Market is expected to Drive Owing to the R&D Activities and Surge in the Incidence of Chronic Disease The India API market projected to reach USD 27.49 billion at a significant CAGR of over 10.23% during the forecasted period of 2020-2027. Due to the rising up gradation of technology across India and the growing incidence of hereditary cardiac disease, it is further projected to accelerate the API market at a significant rate across the country. Furthermore, the propelling focus on precision medicine is precited to accelerate the India active pharmaceutical ingredient market. Moreover, the use of drug development techniques focused on Artificial Intelligence further expected to boost the market. Related Projects: - Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates Additionally, strategic outsourcing enables enterprises to rely on their core competencies, contributing to improved efficiency, which is anticipated to fuel India's API market. Furthermore, the rising demand for biosimilars across India is predicted to drive the market at a considerable rate. However, the lack of skilled labor is predicted to challenge the growth of the market. Additionally, the increasing penetration of counterfeit drugs further projected to hinder the Indian market's growth substantially. Manufacturing Process Overview in the India API Market Based on the manufacturing process, the India API market segregated into Captive Manufacturing and Contract Manufacturing. The Captive Manufacturing segment is predicted to hold the largest share during the forecasted period of 2020-2027 across the country. It is attributed to the proper manufacturing and strong capitalization of raw materials, which is estimated to boost the India API market significantly. In addition, manufacturing technologies favor in-house production of innovative products to take advantage of the economic opportunities and avoid the proliferation of technologies, which is further predicted to accelerate the market. Related Books: - Pharmaceutical, Drugs, Proteins Technology Handbooks Type of Synthesis Overview in the India API Market Based on the type of synthesis, the India API market is segregated into Synthetic and Biotech. The biotech segment is estimated to have the fastest growth rate during the forecasted period of 2020-2027 owing to the propelling technological advancement in the manufacturing process. Additionally, the increasing demand for the therapeutic and diagnostic solution on Red Biotechnology concepts, recombinant, and DNA sequencing technology is anticipated to boost the market. Related Videos: - Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Pharmaceutical Bulk Drugs API Formulation Overview in the India API Market Based on the API Formulation, the India API market is categorized into Generic API and Innovative API. The Generic API segment is predicted to hold the largest share over the forecasted period of 2020-2027 across the country. It is attributed to the patent expiry of labeled molecules, which is expected to drive the market at a considerable growth rate. In addition, the decreased in the cost of the generic drug is further projected to fuel the India API market. Related Market Research Report: - India Active Pharmaceutical Ingredient (API) Market However, the Innovative API segment is estimated to have a significant growth rate during the forecasted period by 2027 due to the presence of favorable government regulations in the research and development of drugs. Application Overview in the India API Market Based on the Application, the India API market is classified into Anti-infectives, Cardiovascular and Hematopoietic System, Central nervous system, Respiratory, Gastrointestinal Disorders, Urology, and Others. The Cardiovascular and Hematopoietic System segment is expected to hold significant market share in API market over the forecasted period of 2020-2027 across the country due to the increasing prevalence of cardiovascular diseases coupled with the incidence surge of obesity. In addition, the variation in lifestyle has increased the incidence of obesity is further predicted to drive the segment's market. Projects: - Project Reports & Profiles However, the Central nervous system segment is expected to have a considerable growth rate during the forecasted period by 2027 across the country. It is due to the increasing emphasis on early diagnosis & treatment, which is predicted to fuel the market. Additionally, the growing prevalence of neurological diseases and rising funding for neurological diagnostics is estimated to improve the market significantly. Regional Overview in the India API Market By geography, the India API market segmented into North India, South India, West India, and East India. The West India region is projected to hold the largest share during the forecasted period of 2020-2027 owing to technological advancement. In addition, rapidly evolving healthcare facilities and growing healthcare budgets are further anticipated to propel the India API market. Furthermore, the availability of affordable labor across the region is expected to accelerate the region's market. Books: - BOOKS & DATABASES India API Market: Competitive Landscape Companies such as Dr. Reddy's Laboratories Ltd., Aurobindo Pharma Limited, Cipla Limited, Sun Pharmaceutical Industries Limited, GlaxoSmithKline Pharmaceuticals Ltd, Indoco Remedies Ltd., Piramal Enterprises Ltd., Teva Pharmaceutical & Chemical Industries India Pvt. Ltd., Sri Krishna Pharmaceuticals Limited, Pan Drugs Limited, and Other Prominent Players are the key players in the India API market. Tags #MarketResearchReports #MarketReseach #IndustryTrends #IndustryDemands #ActivePharmaceuticalIngredient #API #pharmaceutical #pharmaceuticalindustry #NPCS #projectconsultancy #businessconsultancy #apimarket #chemicalapimarket #biotechapimarket #highpotencyapi #marketforecast #GlobalMarket #GrowthRate #MarketTrend #marketdrivers #marketopportunity #marketanalysis #PESTELAnalysis #MarketEconomic #MarketSize #MarketShare #MarketGrowthRate #markettrends #MarketImpact #marketDemand #MarketStrategy #Marketinvestment #marketinggrowth
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Herbal/Ayurvedic Hand Sanitizer

Ayurvedic Herbal Hand Sanitizers provides an effective and convenient way to clean your hands when soaps and water are not available. The main ingredient in the hand sanitizers are its extracts (Vanilla, Basil and Sandalwood, Lemon), Vitamin E, and Tea Tree oil. Vitamin E softens rough and dry hands and it is proven to be treating skin infections and Tea Tree Oil softens dry cuticles and provides relief from itching. This alcohol-based sanitizers kill 99.99% bacteria, fungi and prevents from infections. It absorbs in seconds, leaving sweet fragrance and everlasting essence with a feeling upon its repetitive usage. Hand sanitizer is a gel or foam that kills germs and infectious bacteria. It is used as an alternative to hand-washing, and comes in two main varieties, those that are alcohol-based and those which are not. Hand sanitizer is listed on the WHO’s List of Essential Medicines. Hand sanitizer is a liquid or gel generally used to decrease infectious agents on the hands. They are available as liquids, gels, and foams. Formulations of alcohol-based versions are preferable to hand washing with soap and water in most situations in the healthcare setting. Generally, it is more effective at killing microorganisms than soap and water, with some exceptions such as norovirus and clostridium difficile. The general use of non-alcohol based versions has no recommendations. Outside the healthcare setting, hand washing with soap and water is generally preferred. Hand washing should still be carried out if contamination can be seen or following the use of the toilet. India hand sanitizer market is projected to surpass $ 43 million by 2025. Growth of hand sanitizer market in India can be attributed to rising awareness about healthy lifestyle & wellness, shifting consumer preference towards convenient hygiene products and rising disposable income. Moreover, the strong marketing activities by leading brands, in addition to huge endorsements, are some other drivers of hand sanitizer market in India. Moreover, the COVID-19 outbreak has boosted demand for sanitizers like never before across the diverse end user segments. Traditionally, the conventional methods include washing hands with soil, ash and water but these methods were not proven as they only clean the hands but they didn't sanitize them. With swaying time, people started using the soaps for washing hands but they were also not hygienic due to the frequent touching. Moreover, the world was also facing the outbreaks of communicable diseases such as H1N1 Swine Flu, Bird Flu, Small pox, Measles, Ebola virus, Marburg, Hantaviruses, and the recent one, Covid 19 corona virus. It became very necessary to maintain health and hygiene to overcome this diseases. Hence, the necessity of the hand hygiene products such as liquid hand wash and hand sanitizers emerged in the modern world. India hand sanitizer market is projected to surpass $ 43 million by 2025.Growth of hand sanitizer market in India can be attributed to rising awareness about healthy lifestyle & wellness, shifting consumer preference towards convenient hygiene products and rising disposable income. Moreover, the strong marketing activities by leading brands, in addition to huge endorsements, are some other drivers of hand sanitizer market in India. Moreover, the COVID-19 outbreak has boosted demand for sanitizers like never before across the diverse end user segments. Few Indian major players are as under Ayurvet Ltd. Dabur Pharmaceuticals Ltd. Himalaya Drug Co. Pvt. Ltd. PatanjaliAyurved Ltd. Emami Ltd. Truworth Health Technologies Pvt. Ltd.
Plant capacity: Herbal/Ayurvedic Hand Sanitizer (100 ml Size each): 20,000 Bottles / dayPlant & machinery: 14 Lakhs
Working capital: -T.C.I: Cost of Project : 357 Lakhs
Return: 36.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 6 of 9 | Total 84 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top