REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Qatar, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 28 of 219 | Total 2184 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 28 218 219   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

SAFARI PARK - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project,Profitability Ratios

A safari park, sometimes known as a wildlife park is a zoo like commercial tourist attraction where visitors’ car drive in their own vehicles or ride in vehicle provided by the facility to observe freely roaming animals. Safari is trip on land usually in jungle or savanna environment which is engaged in for the purpose of viewing or hunting animals. Most often, the modern safari involves viewing photographing and experiencing animals in their natural habitats with many animal species, fewer people undertake a safari to hunt animal. India is a popular tourist destination in the world. It is frequently visited by global tourists. India is rich in flora and fauna. India is land that is dotted with golden desert charming beaches picturesque hill stations virginal back waters, wild life destinations, mountains, rivers, glaciers etc. All these things make India a great place to tour in India presents various options to enjoy the exhilarating adventure of safari tour. Jungle safari and desert safari are very popular option of safari tour in India. India is also famous providing the experience of horse safari, elephant safari and tiger safari. People from different part of globe visit India to experience the adventurous safari which makes more and more adventure in India.
Plant capacity: Visitors 6000 Nos./DayPlant & machinery: 1099 Lakhs
Working capital: -T.C.I: 49486 Lakhs
Return: 36.00%Break even: 30.00%
Add to Inquiry Add to Inquiry Basket

Iron ore Pelletization - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Iron ore pellets are spheres of typically 8-18mm (0.31-0.71 inch) to be used as raw material for blast furnace. They typically contain 67 to 72% Fe and various additional materials adjusting the chemical composition and the metallurgic properties of the pellets. Pellet plants can produce two varieties of pellets: blast furnace pellets and direct reduction (DR pellets) pellets. Blast furnace pellets are used in the coke based blast furnace process, which is most common method of producing hot metal (molten iron for steel making). It is mainly used in steel mills, where as DR pellet are used in the direct reduction processes to produce sponge iron, which is an alternative process route, as an initial stage from iron to steel. There are good demand of iron ore pellets, so new entrepreneurs can well venture in to this field.
Plant capacity: 1200000 MT/AnnumPlant & machinery: 3801 Lakhs
Working capital: -T.C.I: Cost of Project : 6183 Lakhs
Return: 47.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Coal Tar Pitch Distillation - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Coal tar is a brown or black liquid of high viscosity, which smells of naphthalene and aromatic hydro carbons. Coal tar is among the byproducts when coal is carbonized to make coke or gasified to make coal gas. Coal tars are complex and variable mixtures of phenols, polycyclic aromatic hydro carbons, and metro cyclic compounds, about 200 substances in all. Coal tar is a thick black liquid the consistency of a thick pudding. Coal tars are by metallurgical coke or natural gas. In building projects, this coal by products can be used for roofing jobs, coal tar provides a nice sealant underneath shingles. Coal tar also works as an insulating agent, working with the wall insulation to help maintain a comfortable temperature inside the building, regardless of the outside weather. There are also a number of exterior paints that utilize coal tar in their finished product. The substances provide an excellent sealed surface one it dries in place. Coal tar also helps to keep your space warm. Coal tar is used some boilers to create heat that can then be directed to the duct system that runs throughout the home. Coal tar is also used to manufacture paints, synthetic dyes and photographic material. Like pine tar, it can be used in medicated shampoo, soap and ointment, as a treatment for dandruff, as well as being used to kill and repel head lice. The first coal chemical recovery ovens were installed in U.S. in 1893. There is a lot of demand for coal tar at present and the supply deficit is very high. Few Indian Major Players are as under: Eastern Tar Pvt. Ltd. Himadri Chemicals & Inds. Ltd. Jalan Carbons & Chemicals Ltd. Jocil Ltd. Micron Chemicals Ltd. New India Industries Ltd. Cost Estimation: Capacity : 600 MT/Annum (Light Oil) 2340 MT/Annum (Carbolic Oil) 9450 MT/Annum (Naphthalene Oil) 8370 MT/Annum (Wash Oil) 12600 MT/Annum (Anthracene Oil) 9000 MT/Annum (Heavy Oil) 42300 MT/Annum (Coal Tar Pitch)
Plant capacity: -Plant & machinery: 1531 Lakhs
Working capital: -T.C.I: Cost of Project : 3068 Lakhs
Return: 46.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

Zero QI Pitch for Graphite - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The manufacture of standard commercial graphite as generally practiced in industry differs greatly from that of metals since graphite has no distinct melting point at reasonable pressures, and the usual methods of forming such as casting in industry is manufactured from carbon base material, rather than mined as the natural substance. For this reason it is frequently called artificial graphite. The graphite industry uses a process akin to that of the ceramic, but differing sharply in that a thermoplastic binder is used. The first coal chemical recovery ovens were installed in the U.S. in 1983. By 1915, coke ovens accounted for 97% of the metallurgical coke produced in the U.S. The yield of coal tar, the feedstock for producing coal tar pitch from a ton of coal is 30 to 45 litres. There is lot of demand for coal tar pitch of present and the supply deficit is very high. Coal tar pitch is used as binder in type the manufacture of various carbons such as graphite electrodes for the steel industry, carbon anodes for the aluminium industry. There are two types of QI that are formed during the cooking of coal: primary and carry over. The aluminium and graphite products industries in the country were at present the main consumers of coal tar pitch and related products. Few Indian Major Players are as under: Eastern Tar Pvt. Ltd. Himadri Chemicals & Inds. Ltd. Jalan Carbons & Chemicals Ltd. Jocil Ltd. Micron Chemicals Ltd. New India Industries Ltd.
Plant capacity: High Grade Pitch 35400 MT/AnnumPlant & machinery: 875 Lakhs
Working capital: -T.C.I: Cost of Project : 1447 Lakhs
Return: 46.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

CERAMIC WALL AND FLOOR TILES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The tile is a manufactured piece of hard wearing material such as ceramic, stone, metal, or even glass. Tiles are generally used for covering roofs, floors, walls, showers, or other objects such as tabletops. Alternatively, tile can sometimes refer to similar units made from lightweight materials used for wall and ceiling applications. Ceramic glazed tiles are made of porous body with a coating of white or colored glaze. These are used extensively in the Bathrooms, Kitchen in modern buildings and in Hospitals and Analytical Laboratories, Toiletries attached to Railway platforms. This is because of this products have properties like good resistance to weather and chemicals, having high strength hard, glossy surface with different colors and pleasing appearance. In the near future the chances for replacing these items by other materials look very bleak. These tiles are rather cheap, easy to clean have more life and are available in pleasing colours. India ranks among the world’s top five tile producing countries with a total annual production of around 450mn Sq. Mtr as on March 10. The ceramic tiles industry is large, rapid, growing and populated by organized and unorganized manufacturers. Over the last few years, industry prospects were subdued on account of an oversupply and increasing imports. The industry can be classified into three key segments, viz., wall tiles, floor tiles and segment on account of durability, utility, maintenance and better appearance with premium pricing and higher realisation. In the international markets these tiles are already major sellers. Ceramic tiles today have become an integral part of home improvement. It can make a huge difference to the way your interiors and outdoors look and express. There exists a very good opportunity and ample scope to venture into this field for new entrepreneurs. Few Indian Major Players are as under: Anant Raj Inds. Ltd. Asian Tiles Ltd. Bell Ceramics Ltd. Bell Granito Ceramica Ltd. Delta Tiles Ltd. Diamond Regina Ceramics Ltd. Elegant Marbles & Grani Inds. Ltd. Euro Ceramics Ltd. Excel Frits & Colours Ltd. Godavari Ceramics Ltd. Gujarat Goldcoin Ceramics Ltd. H & R Johnson (India) Ltd. Jalaram Ceramics Ltd. Jay Flash Ceramics Ltd. Lustre Tiles Ltd. Mandsaur Ferro Alloys Ltd. Montana International Ltd. Murudeshwar Ceramics Ltd. Nitco Ltd. Nortech India Ltd. Pearl Jet Microns Pvt. Ltd. Pedder & Pedder Tiles Ltd. Prism Cement Ltd. Regency Ceramics Ltd. Restile Ceramics Ltd. S T C L Ltd. Savana Ceramics Ltd. Silica Ceramica Pvt. Ltd. Stiles India Ltd. Sun Earth Ceramics Ltd. Taurus Novelties Ltd.
Plant capacity: 120000 Sq. Mt/Annum Wall Tiles & 90000 Sq. Mt/Annum Floor TilesPlant & machinery: 542 Lakhs
Working capital: -T.C.I: Cost of Project : 1020 Lakhs
Return: 43.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

ARTIFICIAL SAND FROM STONES AND WASTE METALS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Sand is generally mixed with cement and water form concrete. These sand particles should be hard and inert with respect to cement continuous usages of river sand river beds condition is day by day deteriorating and threatening environmental disaster. This situation has forced the State Government to ban sand mining in many rivers and also to enforce stringent restrictions. This action has resulted deficiencies. This material supply on the other hand the construction industry is in a constant state of flutter these days. Sand is naturally occurring granular material composed of finely divided rock and mineral particles. Sand makes small hills and slopes, sand improves traction in icy or snowy conditions, sand is the principal component in common glass and sand is mixed with cement and sometimes lime to be used in masonry construction. Due to the increase of population and living standards, the demand for this product is multiplying in every year. Present supply of production is meeting only about 20% of the demand; if all the crusher units of the state start manufacturing machine made sand as an additional venture then also it could meet only about 50 to 60% of the requirements. Looking into the stringent state government policy on sand excavation and the constant fluttering state of construction industries and short supply of machine made sand it would be highly appropriate to set up some machine made sand units in this state the product of the new units could easily be accommodated in the present un saturated market. The scope for this product is very bright. A entrepreneur venturing into this project will find it very lucrative.
Plant capacity: 240000 MT/AnnumPlant & machinery: 178 Lakhs
Working capital: -T.C.I: Cost of Project : 460 Lakhs
Return: 43.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

CONCRETE BLOCK & READY MIX CONCRETE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

PRODUCT PROFILE Concrete is a composite construction material composed primarily of aggregate, cement and water. Concrete is widely used for making architectural structures, foundations, brick/block walls, pavements, bridges/overpasses, motorways/roads, runways, parking structures, dams, pools/reservoirs, pipes, footings for gates, fences and poles and even boats. Concrete blocks for building houses were first made in Europe around 1850. Ready mix concrete is a modern trend of introduction in the Asian Countries. It is already introduce long before in the European Countries. It is new concept of use concrete in the construction area. Ready mix concrete has advantages in the area where immediate requirement of concrete mixture like in the preparation of bridge overhead roads on or the road construction. In India there is a hope to get good scope of RMC within short period. There are plenty of raw materials and plant machineries in India indigenously. Technical Specifications of Concrete Blocks Typical size -300 x 200 x 150 mm Average compressive strength at 28 days 50-110 kg/sq.cm Mix Proportion -1:12-14 (1 part cement: 12-14 parts sum graded aggregates) Water absorption in 24 hours -less than 10% by weight of block Applications The concrete hollow blocks are used for building construction in developed countries. It takes less time in building work when concrete hollow blocks are used for building walls. Several bit of wall height can be constructed in a few hours in case of concrete hollow block walls compared with much slower rate of construction with conventional bricks. The second major advantage derived by the use of concrete hollow blocks is that the cavities in the blocks are fitted with air column even after completion of the building work. The cavity firmed in the concrete blocks makes it easy for prompt handling and higher in weight in comparison to the solid blocks of the same dimensions. Thus, workers engaged in building construction work feel less exhausted even after long stretch of work. It is used in the construction of bridge, dam overhead roads, pools, multi stories buildings etc. Global demand National Scenario India is the second largest producer of cement in the world after China. It is followed by Japan and the USA. The overall turnover of the industry is placed at Rs 600 bn. India accounts for a share of about 6% against China's 37% and the USA's 5% of global production. India is the second largest producer of cement in the world after China. It is followed by Japan and the USA. The overall turnover of the industry is placed at Rs 600 bn. India accounts for a share of about 6% against China's 37% and the USA's 5% of global production. Cement and ready mix concrete demand is dependent on the level of construction activities. Construction activities are in turn closely related to a number of macroeconomic factors such as consumer spending, population growth, manufacturing sector growth, inflation rates, and government spending etc. The construction industry is the second largest industry in India after agriculture. It accounts for about 11% of India’s GDP. Construction constitutes 40% to 50% of India's capital expenditure on projects in various sectors such as highways, roads, railways, energy, airports, irrigation etc. The growth of RMC (Ready Mix concrete) in India has in the past been predominantly driven by demand from the metro cities. International scenario The world market for Ready Mix Concrete is projected to reach $105.2 billion by the year 2015. This is primarily driven by rapid growth in infrastructure, residential sectors, and non residential sectors in various parts of the world. Further, the rapidly growing demand for the ready mix concrete in urban areas will also contribute to the market growth. The demand of concrete block & ready mix concrete in the market is immense and therefore its market position is splendid. Hence it is an excellent field to venture.
Plant capacity: 2400000 NO.s Concrete blocks /Annum, 49000 Cubic metre Ready mix concrete/Annum, Plant & machinery: 1068 Lakhs
Working capital: -T.C.I: Cost of project: 1477 Lakhs
Return: 44.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

ARTIFICIAL SAND FROM STONES AND WASTE METALS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

PRODUCT PROFILE Sand is a naturally occurring granular material composed of finely divided rock and mineral particles. The composition of sand is highly variable, depending on the local rock sources and conditions, but the most common constituent of sand in inland continental settings and non tropical coastal settings is silica (silicon dioxide, or SiO2), usually in the form of quartz. Sand is generally mixed with cement and water form concrete. These sand particles should be hard and inert with respect to cement. In the construction industry commonly used artificial sand to compound concrete. Use of artificial sand concrete density, anti permeability, antifreeze performance is good, other physical and mechanical performance and long term durability all can reach the design requirements of operation. Artificial sand preparation is especially suitable for high strength grade of concrete, the high performance concrete and pumping concrete. Applications Sand has its applications in various fields. In agriculture sandy soils are ideal for crops such as watermelons, peaches, and peanuts and their excellent drainage characteristics make them suitable for intensive dairy farming. In aquaria it makes a low cost aquarium base material which some believe is better than gravel for home use. Manufacturing plants add sand to a mixture of clay and other materials for manufacturing bricks. Coarse sand makes up as much as 75% of cob. Sand is mixed with cement and sometimes lime to be used in masonry construction. Sand is often a principal component of this critical construction material. Sand is the principal component in common glass. Mixing sand with paint produces a textured finish for walls and ceilings or non slip floor surfaces. Sand is also used as sand bags, these protect against floods and gunfire. Media filters use sand for filtering water. Global demand Due to the increase of population & living standards, the demand for this product is multiplying in every year. Present supply of production is meeting only about 20% of the demand if all the crusher units of the state start manufacturing machine made sand as an additional venture then also it could meet only about 50- 60% of the requirement. At present the existing sand manufacturers are producing sand like materials form granite stone and people are facing difficulties while plastering work. The demand of river sand will roll and will bring back the smiles on the faces of both the environmentalists and the industries. Because there is abundant of natural sand because of the heavy demand in the growing construction activities in nowadays society, the artificial sand production line the sand produce field has a popular and a welcome position. The demand of sand in the market is immense and therefore its market position is splendid. Hence it is an excellent field to venture.
Plant capacity: 720000MT/AnnumPlant & machinery: 595 Lakhs
Working capital: -T.C.I: Cost of the project: 1066 Lakhs
Return: 44.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

LPG BOTTLING PLANT

PRODUCT PROFILE Liquefied Petroleum Gas is a Propane/Butane mixture liquefied under normal ambient temperature and moderate pressures. It is a safe, clean burning, reliable, high calorific value fuel. In addition to its use as a domestic fuel, it is also widely used in industries, where there is a requirement of low sulphur content fuel and fine temperature controls. The Chemical composition of propane is C3H8 and butane, C4H10. Liquefied Petroleum Gas (LPG), popularly known as cooking gas, is a mixture of hydrocarbons which are gaseous at normal temperature, but can be liquefied at moderate pressure, and can be stored in cylinders as a liquid under pressure, and is drawn out and used as gas. Product characteristics Calorific value - 11,900 Kcal/Kg Specified LPG Air ratio -2% to 9% Applications • For industries today, quality, costs, efficiency, environment, heat controllability, among others, are major concerns when it comes to choosing the right fuel. • LPG addresses all these making it the ideal fuel choice for a host of industrial and domestic applications. • LPG is a pure, clean energy source which provides even and controllable heat. This makes it the ideal heat and power source for a wide range of industrial uses. • Since LPG is almost free from sulphur, it can be used in sensitive situations such as chemical processes, etc. • LPG is also used for space and process heating to power industrial ovens, kilns, furnaces, machinery and in food processing units. Global demand The LPG industry is already experiencing a boom with more depots springing up, which will make supply of LPG to the filling plants easier. LPG was introduced as a domestic fuel in the 1960s. The three sources of supplies were refineries, fractionation of associated gas from oil fields and imports. As of early 2000s, about half of domestic LPG production is based on crude oil and the other half comes from natural gas. The imports constitute more than 20% of the supplies. There are efforts to increase import capacity of ports. The demand for LPG has grown from less than 200,000 tons in 1970-71. The average growth rate in demand has been around 12% annually. There are around 40 million LPG customers. Some 15 million have been on the waiting list (only in urban areas). LPG consumption by industry is split as follows: 89% domestic, 1% refinery, 1% transport, 8% industry and 1% agriculture. In the 1990s, LPG demand was estimated at 7.5 to 9.0 million tons (MT) by 2001 to 02 and 10.0 to 12.0 MT by 2006 to 07. Since the applications and demand of LPG is immense therefore the potential of the product is excellent. It is one of the imperative fields to endeavor.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Fastener (Automatic Cold Forge Process) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Profile: A fastener is a hardware device that mechanically joins or affixes two or more objects together. Fasteners mainly cover nuts, bolts, screws, studs and rivets and are segmented between MS (mild steel) and HT (high tensile) fasteners. These fasteners are used in engineering systems. All types of fasteners, except high tensile and special type fasteners, are reserved for the SSI sector. Bolt is cylindrical piece of metal that fasten objects together. It is a piece of steel forged at one end to make hexagonal, square or round head and the shank fully or partially threaded at the other end. Nut is hexagonal or square piece with a threaded hole at the center. Bolts and nuts can be zinc or cadmium plating to resist corrosion. Application: • Bolt and nut are used to fasten together loose parts mainly in industries and workshops. • In construction connectors between structural members bolt connections are used when it is necessary to fasten two elements tightly together. • Threaded metal bolts are always used in conjunction with nuts. • Another threaded partner is screw, which has countless application especially for wood construction. • The wood screw carves a mating thread in the wood, ensuring the tight fit. • Pins are used to keep two or more elements in alignment; since the pin is not threaded, it allows for rational movement, as in machinery parts. The general applications of various objects having screw threads are: Fastening: screws, nut-bolts and studs having screw threads are used for temporarily fixing one part on to another part Joining: e.g., co axial joining of rods, tubes etc. by external and internal screw threads at their ends or separate adapters Clamping: strongly holding an object by a threaded rod, e.g., in c clamps, vices, tailstock on lathe bed etc Indian Scenario: The Indian Fastener Industry is estimated to have a domestic market of around INR 1500 crore. Automobile industry is the biggest consumer of fasteners. Mild steel fasteners are primarily manufactured by the unorganized sector while the high tensile fasteners require superior technology and dominated by companies in the organized sector. The organized sector commands nearly 70 percent of the fasteners market while the rest is controlled by the unorganized sector and imports. Global Scenario: Global demand for industrial fasteners is projected to increase 4.8 per cent annually to US$ 66 billion in 2012. All types of fasteners, except high tensile and special type fasteners, are reserved for the SSI sector. Total market size of the fastener industry is estimated at around €272m in revenues. Fasteners market can be classified into mild steel (MS) and high tensile (HT) fasteners. MS fasteners constitute about 30% of the market size and are mainly produced by the unorganized sector, while HT fasteners are produced primarily by the organized sector. Automobile sector is the major demand driver for the bearing industry and constitutes almost 50% of the total demand in value terms. The bearings industry consists of bimetal bearings and anti friction bearings. The anti friction bearings comprise €270 360 mn of the bearings market and bimetal bearings comprise the rest of the market. Imports comprise approximately 25 to 30% of the total market. Therefore the scope for this product is very bright. An entrepreneur venturing into this project will find it very lucrative.
Plant capacity: 2400 MT/AnnumPlant & machinery: 120 Lakhs
Working capital: -T.C.I: Cost of project: 417 Lakhs
Return: 42.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 28 of 219 | Total 2184 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 28 218 219   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top