Google Search

Search

Already a Member ?

Investment Opportunities & Business Ideas in Oman, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 6 of 213 | Total 2130 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 212 213   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Steel Rolling Mill - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The chief departments of a metallurgical plant operating on a complete are to finished product cycle are that operating on a complete are to finished product cycle are that blast furnace, steel making and rolling departments. The finished product of such a plant is rolled stock of various purposes, such as : rails, beams, channels, angles, round, square or strip steel, special purpose shapes,, plate and sheet, tubes etc. These industries can be in India with reasonably small investments (even less than one crore rupees). Straps of rerollable quality are available in abundance and at cheap prices. The metals sector is certainly among the leading polluters of the environmental media (Add the mining sector and a huge chunk of the pollution of the air, water and soil around us, can be attributed to these). India enjoys a cost advantage compared to some countries. According to the world steel dynamics, the total cost of production for steel in the USA is $510 per tones, in Germany $557, Canada $493 and in India it is 497. There is a good scope for new entrants.
Plant capacity: 200.00 MT/DayPlant & machinery: 275 Lacs
Working capital: -T.C.I: 3897 Lacs
Return: 61.00%Break even: 26.00%
Add to Inquiry Add to Inquiry Basket

High Mast Poles - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

High mast poles are newly ventured high pillars for using high mast lighting, flood lighting, sports lighting, traffic signals, street lighting etc. It is machine made or moulded product. It is manufactured by M.S. plate with galvanized uniform coat. It has now largely growing market. Every country now introduces this pole in their multipurpose use. Some organized companies have introduced this product and many companies are available in the European countries who are manufacturing high mast poles and machineries. It has very good market growth 5-8% per annum. Partly plant and machineries are available in India and some are to be imported. As a whole this is a good project for the any entrepreneur.
Plant capacity: 9000 Nos./ANNUMPlant & machinery: 206 Lacs
Working capital: -T.C.I: 484 Lacs
Return: 44.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Ferro Chrome Alloy - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

In the manufacture of steel, chromium is added usually in the form of ferro chrome. Pure chromium metal, produced by electrolytic or aluminothermic processes, is used for alloying nonferrous engineering materials. The most common materials are nickel-based and cobalt-based alloys, most of which are used at high temperature. Chromium powder, as well as Ferro chromium Powder, has been used in considerable quantities to produce chromium coatings. The so-called pack chrome coating is applied to cast and wrought steel parts by immersing the article in a mixture of chromium powder, an inert material, e.g. kaolin, alumina, or magnesia and mixtures of various salts. Such as ammonium, iodide or chloride. The gas chromium coating has been used to produce a so-called tin-free steel and to treat sheet steel on a continuous line. The demand for ferro alloys has been increasing with that of alloy and special steels. There are six leading players and over 30 small producers. The industry has tied up with companies in Europe for technology inputs. The major users of alloy steel are : auto industry, railways, forging, tubes, springs and other engineering industries. There is a bright scope. Any entrepreneur can venture to in this project.
Plant capacity: -Plant & machinery: 2998 Lacs
Working capital: -T.C.I: 4490 Lacs
Return: 34.00%Break even: 76.00%
Add to Inquiry Add to Inquiry Basket

Liquid Glucose From Broken Ric - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Broken rice is the by-product of rice mill. It has various uses out of which one use is to prepare liquid glucose from broken rice. It can be processed from the F.C.I. Godown also. By using broken rice, starch can used as filler in the different variety of food products. About 90% of the liquid glucose produced in India is consumed by the confectionery industry. Its preparation of sugar candy. It standard confectionery being about 33%. It is used also in textile printing and in biscuit and tobacco canning. The rest of this is used in leather, textile pharmaceutical and other industries. The domestic demand for liquid glucose had been estimated as 4000 MT/annum of which 3000 tonnes are used in the confectionery plants and are therefore widely distributed in their crude from. They can be found in almost all fruits, vegetables and corns. Different countries are known to be using different agricultural sources for production of starch. Now a days there is very good scope of new investment in this line.
Plant capacity: 30000MT/AnnumPlant & machinery: 664 Lacs
Working capital: -T.C.I: Cost of Project 1107 Lacs
Return: 40.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Cans for Brewery Industry - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities,Plant Layout

Aluminium is an abundant metal and is readily available at a very stable price. Aluminium foil is being produced and converted on the most modern machinery. The foil industry is not content, however, to rest on its laurels, and new uses for foil, and improved foil specifications for existing uses, are constantly rought. The United Kingdom aluminium foil industry itself has been rationalized over the past ten years on an International scale in which some of the world’s largest companies are concerned. The United Kingdom foil industry today stands better organized and better equipped in very direction to serve its customers and to meet the demands of the future. It is used to filled up bear in the brewery industry. It is used to filled up the processed food for packing. It is used to filled up fruit juices, synthetic syrup. On that base it can be assumed that half of the share will go in the beverages industry. It is found that 11000 MT. product of aluminium can used in the beverage industry. There is good scope for new investment. Any entrepreneur can enter in this fields.
Plant capacity: 50000 Nos./dayPlant & machinery: 131 Lacs
Working capital: 139 LacsT.C.I: -
Return: 31.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

CEMENT PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The general outlook for the cement industry is fulfilled the situation in a large body of Indian Industry, with a market rise in production failing to generate adequate profitability. In some quarters, the mini-cement plant has been following, since it opens up possibilities of exploiting small deposits of limestone in difficult and thereby contributes to the socialist pattern on the other hand. There has been a bright scope in setting up mini-cement plant. Indian Government is providing a scheme of soft loans to current units wishing to convert from wet to dry. With the combination of all these new development the industry may with luck play its full role in the national programme
Plant capacity: 500 MT/Day OR 10,000 BAGS/DAYPlant & machinery: Rs. 476.00 Lakhs
Working capital: Rs. 606 LacsT.C.I: Rs. 1307 Lacs
Return: 68.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

CEMENT PROJECT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

The general outlook for the cement industry is fulfilled the situation in a large body of Indian Industry, with a market rise in production failing to generate adequate profitability. In some quarters, the mini-cement plant has been following, since it opens up possibilities of exploiting small deposits of limestone in difficult and thereby contributes to the socialist pattern on the other hand. There has been a bright scope in setting up mini-cement plant. Indian Government is providing a scheme of soft loans to current units wishing to convert from wet to dry. With the combination of all these new development the industry may with luck play its full role in the national programme
Plant capacity: 500 MT/Day OR 10,000 BAGS/DAYPlant & machinery: Rs. 476.00 Lakhs
Working capital: 606 LacsT.C.I: 1307 Lacs
Return: 68.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

Hot Dip Galvanizing Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Hot dip galvanizing is a process in which an adherent, protective coating of zinc compounds is developed on the surface of iron and steel products by immersing them in a bath of molten zinc. The protective coatings usually consists of several layers. Those closest to the basic metal are composed of iron-zinc compounds; these in term are covered by an outer layer consisting almost entirely of zinc. The complex structure of layers that comprise a galvanized coating varies greatly in chemical properties, being affected by chemical activity, diffusion and subsequent cooling. Hot dip galvanized coatings are produced on a variety of steel mill products, using fully mechanized, mass production methods. This article, however, is concerned primarily with the hot dip galvanizing of fabricated articles in manual or semiautomatic batch operations. From a modest beginning, about a century ago, the engineering industry in India has come along way and today the industry produces a stupefying range of products like plant and machinery, machine tools, power generating transmission and distribution equipments, commercial vehicles and a variety of other industrial goods and consumer durables. The significance of the engineering industry in India industrial set up stems from its forward and backward linkages with virtually all sectors. There is bright scope for new investment. Any entrepreneur can enter in this field.
Plant capacity: 12 MT/DayPlant & machinery: RS. 176 Lakhs
Working capital: -T.C.I: Rs. 859 Lakhs
Return: 53.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Hot Rolled Plate Mill - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

To think of steel first of all a rod or a bar as you may call it comes to the mind of a common man in India. Steel rods are required even for making a Chulah, an earthen over based on coal firing widely used in our villages for domestic cooking. Use of galvanized steel wires made out of wire rods by the process of cold drawing, is also very common in our villages for the purpose of fencing construction of thatched roof etc. Steel products are broadly divided under two major groups (i) non flat or long products, i.e. bar/rods, angles, channels, beams etc. Is predominant in any developing country. These are largely used in civil constructions starting from domestic buildings to huge dams and bridges wherever reinforced concrete is used. After hot and cold rolled flat products which cover about 50% of the total steel consumption in India, the most natural and important product that draws the attention of a steel entrepreneur is wire rod. Hot-rolled flat products are classified into two main groups. 1) plate and 2) sheet. Plate includes steel from 4 to 160mm in thickness and from 600 to 5,000mm in width. Boiler and firebox plate are usually rolled in thickness from 8 to 60mm from carbon steel. Such plate is either only hot rolled or heat treated as well. Carbon steel plate for bridge building is applied for riveted and welded construction of bridges, industrial and civil structures and rail road cars. Alloy steel plate is also rolled for bridge building. The plate must have a smooth, clean surface, free of blister scabs, blowholes, cracks and laps. Very important product of steel industry and its requirement in India is only going to multiply with time. India is producing over 3 million tonnes of wire rods per annum and is already in the export market with good reputation. It has very good market demand now days.
Plant capacity: 500 MT/DayPlant & machinery: 39 Crores
Working capital: -T.C.I: 145 Crores
Return: 41.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Crude Oil Refining (Refinery) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The American petroleum industry had its inception when the now famous drake well was drilled in the year 1859. The ratio of proven reserves to production in the US in 1957 stood at 11.9 to 1. The ratio does not indicate that there are only twelve and one half years to go before the US reserves are exhausted. Now pools are continuously being discovered and when proven add to the known reserves. Nevertheless, this ratio does indicate an increasing reliance on foreign crude oil. Domestic crude oil production together with liquid products from natural gas and coal tars amounted to 2,749,023,000, leaving a deficit of 322,625,000, which is made up by an excess of imports over exports. The US is depending upon foreign supplies for about 15 percent of its requirements. The largest tank ship now building is of 106,000 D.W. tones, has a speed of 18 knots and carries 820,000 barrels of oil a giant larger than the Queen Mary. Ships of 45,000 to 60,000 D.W. tons are already in service and others of 80,000 upward to the 106,000 tons giant are under construction. Thank ships bring the crude oil to the coastal refineries from producing centers such as the Texas-Louisiana gulf coast and from foreign sources, principally Venezuela and the middle east. Every industry used it. Most of the domestic people uses it in the house. In the every commercial industry used it. The energy demand is expanding worldwide especially in low consumption developing countries. India is no exception. In fact to be able to catch up with the global development the demand from the developing countries is bound to expand. World wide the oil demand is likely to grow from the present 76 mm barrels a day (bpd) to 115 mm barrels a day in 2020, a growth of 2 mm barrels a day each years. Any entrepreneurs may come into this field will be successful.
Plant capacity: 200000 Cube Meter/DayPlant & machinery: US $ 273.3 Million
Working capital: N/AT.C.I: US $ 3083 Million
Return: 1.00%Break even: 12.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 6 of 213 | Total 2130 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 212 213   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top