REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Investment Opportunities & Business Ideas in Ethiopia, East Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 65 of 299 | Total 2990 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 65 298 299   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

SEWING THREAD REELS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Sewing thread is a common household item and is the prime material for stitching purpose. Capren and lavsan used for the manufacture of sewing threads exhibit high chemical & physical properties. Now polypropylene yarns have replaced polyester threads. Sewing thread balls & reels have a great demand in Indian as well as foreign markets. Moreover, its manufacturing procedure is very simple. In the market there is a maximum demand for cotton reels & balls. Whereas, silk, viscose rayon and polyester cotton reels and balls are also available but these pose seasonal demand only.
Plant capacity: 2000 Nos. / DayPlant & machinery: 6 Lakhs
Working capital: -T.C.I: 13 Lakhs
Return: 48.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

WAX CRAYON - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The wax crayons are used for outlining and shading by the artist for drawing. Two types of crayons are produced in India chalk crayons and marking crayons. The raw materials used for chalk crayons are gypsum, calcium carbonate and pigments. Calcium gypsum steatite & compound of magnesium, bismuth and lead are occasionally used as base. Crayons are used by school going children, artists and craft-man for marking. The demand of marking crayon is increasing definitely. In India, the crayons are made by only a few firms and there is a huge demand of good quality of marking crayons. The demand is very good. So a new entrepreneur can venture in this field by installing a unit of wax crayon to fill the demand supply gap.
Plant capacity: 7200 Dozens / DayPlant & machinery: 2 Lakhs
Working capital: -T.C.I: 50 Lakhs
Return: 56.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

AROMATIC HERBAL SHAMPOO - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Shampoos have increased in importance beginning with soap based products and expanding. To prevent or alleviate abnormalities of epidermis skin and scalp, various bactericides, keratolysis agents and sensitizing dyes and peripheral nervous stimulator such as menthol have been used in hair tonic preparation. Such types of herbal shampoos contain aromatic compounds, safe for daily use. Accordingly in todays market place, shampoos formulated with synthetic surfactants have all but replaced hair tonics of the past. The consumer now demands the optimum in performance.
Plant capacity: 300 MT/AnnumPlant & machinery: 23 Lakhs
Working capital: -T.C.I: Cost of Project : 86 Lakhs
Return: 42.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

OIL BASED PAINT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Paint is a substance of solid colouring matter suspended in a liquid medium and applied as a coating of various types of surfaces. The purpose of the coating may be decorative, protective or functional. Decorative effects may be produced by colour, glass or texture Protective coatings may be the paint on a wooden boat. The paint industry serves two distinct type of markets: trade sales and industrial sales. Trade sales is the large consumer-oriented portion of the business. They are house paints and other products marketed through whole sale and retail channels to the general publication industrial sales comprise the coating sold directly to the manufacture for factory application. The paint industry has a bright future, with the revival of the Indian economy and emphasis on construction activity.
Plant capacity: 2 MT / DayPlant & machinery: 34 Lakhs
Working capital: -T.C.I: 3 Crores
Return: 49.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

PAPER BOARD CARTONS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Materials available for packaging are paper, metal containers, foils, glass, plastic-rigid, jute, plastics and wood. Among these materials, paper and paper based products continue to occupy a predominant place. Corrugated board is used for making corrugated boxes, which finds application in packing of a wide variety of consumer products like cosmetics, drugs, food products, house-hold goods, electrical and electronic goods, cigarettes, textiles, beverages, chemicals & hardware. The Indian paper industry is extremely fragmented. This industry structure is the result of the past government policies, which encouraged the setting up of many small mills with as low capacity of 1 ton / day.
Plant capacity: 2000 Nos. / DayPlant & machinery: 17 Lakhs
Working capital: -T.C.I: 89 Lakhs
Return: 45.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

IRON POWDER FROM MILL SCALE SCRAP - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

Iron powder is used to produce particles in desired range for use in powder metallurgy and metallic pigments. Powder iron made electrolytically makes stronger parts than other types and electrolytic iron powder makes parts that are easier to machine and improved wear. In future, the demand from all these uses is expected to increase. All the end use industries except railways are estimated to increase their demand at their respective trend growth for the last ten years. In case of railways the demand is expected to grow according to the likely expansion in railway stocks and fluids allocated for repairs and maintenance of tracks. Accordingly, the demand from railway is estimated to increase at 12 percent per annum. Export demand is roughly part at 5% of total demand.
Plant capacity: 2 MT / DayPlant & machinery: 23 Lakhs
Working capital: -T.C.I: 176 Lakhs
Return: 46.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

GOOD OPPORTUNITY IN SOLAR POWER PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

In case of Photovoltaic or direct conversion of sunlight to electricity via solar cell, the efficiencies limited to about 20 percent of the absorbed sunlight. Solar thermal conversion involves the production of shaft power and of electricity via a thermodynamic cycle. In this cycle, a heat engine is driven by energy absorbed from sunlight. The heat engine is the principal feature that distinguishes the discipline of solar-thermal electricity from photovoltaic or home heating and cooling. All heat engines are limited in performance by the fundamental laws of thermodynamics. To achieve the higher temperature associated with heat engine efficiency places special requirement on the solar collector used. The collector must be designed either to suppress normal loses that is, those due to radiation, convection or conduction-or to enhance the intensity of the incident solar energy by optical concentration. Finally, to provide a useful quantity of energy at a central location, some degree of power concentration is often required. Solar thermal systems for generating electricity use tracking mirrors to reflect and concentrate sunlight on to a receiver, where it is converted to high temperature thermal energy. The high-temperature heat in the receiver is then used to drive a heat engine and electric generator to produce electricity. Currently, three architectures for Solar Thermal Systems show promise for generating; parabolic troughs, central receivers, and parabolic dishes. In parabolic trough systems, sunlight is focused on to a receiver tube that runs along the focal line of the collector. Through collectors typically track the sun in one axis. A central receiver system uses a field of heliostats, or sun-tracking mirrors, to focus sunlight on to a tower-mounted receiver. And in a parabolic dish system, both the parabolic mirror and receiver track the sun. Many system configurations are possible. However, the architectures and optical characteristics of solar thermal systems influence the choice of receiver, power conversion equipment, and scale of systems. In typical trough systems, the relatively low concentration ratios (typically 20X - 100X), as well as the inherent economics of scale of steam-Rankine power conversion equipment have led to a large-scale power plants which use a heat transfer oil to collect solar heat in the receiver tube. Central receivers because of higher concentration ratios, typically a few hundred times, and the centrally located receiver have evolved towards molten-salt systems with thermal storage capabilities. Steam-Rankine central receiver systems are also cost effective at large scales, Dish-engine systems, in which the concentrator and receiver track the sun, achieve concentration ratios over 1000 X, and require small eternally heated power converters that are efficient and low cost. Sterling engines located at the focus of the dish have shown the most promise for producing competitively priced electric. The use of hundreds of modular dish-sterling systems at an installation, similar to wind farms that are being considered for utility applications. The earth receives about 75,000 trillion KW of energy from the sun every day. Just 0.1 percent of this is sufficient to meet the energy requirements of the world. Putting this in a different way, at noon, the solar energy striking an area of 70 miles long by 70 mile wide, if converted into photovoltaic electricity, would equal to the peak capacity of all existing power plant in the world. With the ever growing demand for electric power and continuously depleting fossil fuels such as coal, oil and gas various alternative sources of energy have been resorted to by advanced nations. While wind, geothermal and water power are safe to use, they can not be tapped at all times in all places. Ocean and tidal power generation are yet to take off as viable alternatives. Tapping nuclear power poses problems of waste disposal and safety aspects. Most of the processes involve a lot of capital as well as recurring expenditure. Solar power has an edge over all the other non-conventional forms of energy sources as it is non-polluting. The solar energy is abundant and is available at all parts of the world throughout the year. Although no alternative energy sources can compete with plentiful, low cost fossil fuel, the days when we can rely on the availability of such fuels are limited. There seems to be no reasons why the solar thermal electricity option should not be pursued aggressively, and if it is, this option can begin to impact our energy requirement in the coming years. Using sunlight to create electrical and thermal energy remains the most promising source of clean renewable energy, and projections as to how quickly solar power takes off could be grossly understated. The Indian government estimates that a potential of 50,000 MW of power capacity can be harnessed from new and renewable energy sources but due to relatively high development cost experienced in the past these were not tapped as aggressively as conventional sources. Nevertheless, development of alternate energy has been part of India's strategy for expanding energy supply and meeting decentralized energy needs of the rural sector. The program, considered one of the largest among developing countries, is administered through India's Ministry of Non-Conventional Energy Sources (MNES), energy development agencies in the various States, and the Indian Renewable Energy Development Agency Limited (IREDA). India is located in the equatorial sun belt of the earth, thereby receiving abundant radiant energy from the sun. The India Meteorological Department maintains a nationwide network of radiation stations, which measure solar radiation, and also the daily duration of sunshine. In most parts of India, clear sunny weather is experienced 250 to 300 days a year. The annual global radiation varies from 1600 to 2200 kWh/sq. m. which is comparable with radiation received in the tropical and sub-tropical regions. The equivalent energy potential is about 6,000 million GWh of energy per year. The highest annual global radiation is received in Rajasthan and northern Gujarat. In Rajasthan, large areas of land are barren and sparsely populated, making these areas suitable as locations for large central power stations based on solar energy. India supports development of both solar thermal and solar photovoltaics (PV) power generation. To demonstrate and commercialize solar thermal technology in India, MNES is promoting megawatt scale projects such as the proposed 35MW solar thermal plant in Rajasthan and is encouraging private sector projects by providing financial assistance from the Ministry.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

FLEXIBLE CARTONS, STICKERS, LABELS MANUFACTURING & PRINTING WITH ALUMINIUM FOIL - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials

Flexible cartons were firstly developed by the Thomson and Narris Company and the first regular slotted style containers were the products of the Rober Gair Company. The first use of corrugated cartons in freight shipments was for lamp and chimney. When made from suitable materials and proper shape, flexible cartons protect the contents against the hazards of shipping and of storing in warehouses, on store shelves and in customers closets or refrigerators. Corrugated board is used for making corrugated boxes which has applications in packing of a wide variety of consumer products like cosmetics, drugs, food products, household goods, cigarettes, textiles, chemicals, hardware, etc. Aluminium foil production is increasing year by year, along with flexible cartons, stickers and labels, as the future scope and market potential is bright.
Plant capacity: 5000 Nos. of Flexible Cartons, 3600 Mtrs. of stickers Labels, 200 Kg. of Aluminium Foils Rolls / DayPlant & machinery: 77 Lakhs
Working capital: -T.C.I: 330 Lakhs
Return: 42.00%Break even: 35.00%
Add to Inquiry Add to Inquiry Basket

TOMATO PULP - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Tomato pulp is very much popular item derived from tomato fruit. It is a ground form of tomato having only 6% solid content. A wide variety of products are available by processing tomato pulp. Tomato pulp is used for the production of a wide variety of tomato products like sauce, ketchup, juice, etc. By adding proper additions and keeping under specified conditions, tomato pulp can be preserved for a longer period. Other items like puree and cocktail. Processed fruits and vegetables have a very good potential in the export market. The food processing industry has a higher employment potential with a relatively low investment hence, there exists vast areas for new entrants for the development of this industry.
Plant capacity: 10,000 Bottles/Day Plant & machinery: 19 Lakhs
Working capital: -T.C.I: 158 Lakhs
Return: 51.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

STAINLESS STEEL TUBES / PIPES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Stainless Steel tubes are widely used in the dairy & food processing industries, heat exchangers, evaporators, cooling units, stock lives and condensers, such as those used in chemical digestive food liners, blow lines, evaporation pulp and paper industry, pharmaceutical industry production flow lines, aircraft tubing, hydraulic lines, air conditioning and pressurizing tubes, oil lines, electrical controls and switches, fuel lines, flexible joints & connections, exhaust turbine assemblies, oxygen tanks, stationary, etc. so there is a good demand of such products. The demand for steel pipes and tubes is increasing day by day, especially in the automobile industry.
Plant capacity: 600 MT/Annum Plant & machinery: 101 Lakhs
Working capital: -T.C.I: Cost of Project : 282 Lakhs
Return: 41.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 65 of 299 | Total 2990 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 65 298 299   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top