Google Search

Search

Already a Member ?

Business Ideas: Above 5 Crore (Plant and Machinery): Selected Project Profiles for Entrepreneurs, Startups

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 6 of 34 | Total 335 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 33 34   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

AAC Blocks (Autoclaved Aerated Concrete Blocks) Fly Ash Based - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Autoclaved Aerated Concrete (AAC) is a non-combustible, lime-based cementitious building material that is expanding into new worldwide markets. As a singlecomponent building material AAC has achieved acceptance in new markets throughout the world. The AAC has the features of light bulk density good thermal insulation properties and sound absorption, certain strength and process ability, and its raw materials is very rich, especially the reuse of fly ash enables the comprehensive utilization of industrial residue curbs environmental pollution no destroy on farmland create good social and economic benefits. AAC is an ideal alternative of the traditional clay brick wall materials. AAC Blocks have Good heat insulation and humid retention. They are non-flammable. Autoclaved Aerated Concrete (AAC) products are 4 times lighter in weight than ordinary concrete. Its characteristic structure comprising millions of tiny pores, it offers optimum solidity at low weight. Uses and Applications AAC products are equally suitable for residential construction, multistory buildings commercial and industrial construction. The products are made of natural materials: sand lime and water. These raw materials are processed to provide a building material with a large number of air pores; hence, aerated concrete. Fine pores (nearly 70% of the product) and the solid structure of calcium silicate hydrate gives AAC its exceptional material properties. They are fire proof and provide insulation. Its low density permits use in larger building units which serves as a distinct advantage in pre fabrication. Appreciable savings are effected in foundation loads in multi storeyed construction. It is therefore being used increasingly as walling units in some developed countries. Market Survey The autoclaved aerated concrete sector of the construction industry is now in the phase of a tremendous growth cycle. The autoclaved aerated concrete industry must utilize competitive techniques as customers are looking for lowered costs. AAC is not a new building system but it is new to India. Autoclaved aerated concrete (AAC) though relatively unknown in India is currently one of the many building products being touted as green or environmentally friendly. There will be phenomenal growth in autoclaved aerated industry in the near future. Autoclaved aerated concrete blocks having different architectural finishes and color will also play a prominent role in near future. With a high growing good infrastructure and urbanization, the autoclaved aerated concrete Industry is poised for growth in the near future.
Plant capacity: 500 CUM/Day Plant & machinery: Rs.1117 Lakhs
Working capital: -T.C.I: Cost Of Project : Rs. 1886 Lakhs
Return: 36.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Baby & Adult Diapers & Sanitary Pads - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study,Investment Opportunities,Plant Layout

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. When diapers become soiled, they require changing; this process is often performed by a second person such as a parent or caregiver. Diapers are primarily worn by children who are not yet potty trained or experience bedwetting. . However, they can also be used by adults with incontinence or in certain circumstances where access to a toilet is unavailable. These can include the elderly, those with a physical or mental disability, and people working in extreme conditions such as astronauts. It is not uncommon for people to wear diapers under dry suits. Ever since their introduction several decades ago, product innovations include the use of superabsorbent polymers, resealable tapes, and elasticised waist bands. They are now much thinner and much more absorbent. The product range has more recently been extended into children's toilet training phase with the introduction of training pants and pant diapers, which are now undergarments. Modern disposable baby diapers and incontinence products have a layered construction, which allows the transfer and distribution of urine to an absorbent core structure where it is locked in. Basic layers are an outer shell of breathable polyethylene film or a nonwoven and film composite which prevents wetness and soil transfer, an inner absorbent layer of a mixture of air-laid paper and superabsorbent polymers for wetness, and a layer nearest the skin of nonwoven material with a distribution layer directly beneath which transfers wetness to the absorbent layer. Other common features of disposable diapers include one or more pairs of either adhesive or velcro tapes to keep the diaper securely fastened. Some disposable diapers include fragrances, lotions or essential oils in order to help mask the scent of a soiled diaper or to protect the skin. Care of disposable diapers is minimal, and primarily consists of keeping them in a dry place before use, with proper disposal in a garbage receptacle upon soiling. Uses and Applications Diapers are primarily worn by children who are not yet potty trained or experience bedwetting. . However, they can also be used by adults with incontinence or in certain circumstances where access to a toilet is unavailable. Babies may have their diapers changed five or more times a day. Parents and other primary child care givers often carry spare diapers and necessities for diaper changing in a specialized diaper bag. Market Survey Today, the global market for absorbent hygiene products is over US $ 50 bn (including wipes). The evolution of hygiene products in Europe and the NorthAmerica has taken 4 to 5 generations. Feminine care was introduced over 100 years ago. Baby diapers were invented 60 years ago. Adult incontinence products appeared 30 years ago. a research report by RNCOS, “Indian Baby Care Market Analysis”, found that the market of disposable diapers is growing at snail pace compared to other segments of the baby care market. Diapers’ market reached an estimated INR 1.23 Billion in 2010, posting annual growth of around 12% from 2009. Although, there is a huge potential for diaper market in India as mostly the urban population is using it for their babies, the rural population still lags in it. Many established brands, such as P&G, Kimberly-Clark, and Nobel hygiene are continuously adopting steps to grab more and more market share in this huge untapped market. Further research reveals that the Indian baby care market has substantially grown over the past few years and caught the attention of many international players. India continues to enjoy a healthy birth rate compared to other economies, coupled with the increasing level of disposable income of the working class, which is expected to be sustained for a healthy growth momentum in future. The Indian disposable diaper market is currently pegged at nearly Indian Rupees (Rs) 700m ($17.4m, E12.6m) and 30,000 tonnes/year, and is estimated to grow between 5-10% annually. It comprises brands like Huggies (60% market share) and Pampers (30%) from multinationals Kimberly Clark and Procter & Gamble, respectively. Domestic consumer products major Godrej's Snuggy is the third-largest brand of diapers in the Indian market, with a 10% share. Analysts say it will take some time for the baby diaper market in India to pick up. According to Carlos Richer of Richer Diaper Consulting Services, India has about 45% more infants than China and almost six times more babies than the US. Few Indian Major Players are as under: Carewell Hygiene Products Ltd. Diapers India Ltd. Godrej Hygiene Products Ltd. Gufic Biosciences Ltd. Johnson & Johnson Ltd. Kimberly Clark Lever Pvt. Ltd. Procter & Gamble Hygiene & Health Care Ltd. Regency Diaper Inds. Ltd. Softouch Hygiene Products (Mkt) Ltd. Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: Baby Diapers:45,000.0 Pckts/Day.,Adult Diapers:18,000.0 Pckts/Day., Sanitary Pads:63,000.0 Pckts/Day.Plant & machinery: Rs.855 Lakhs.
Working capital: -T.C.I: Cost of Project :Rs.2984 Lakhs.
Return: 32.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Ferro Alloys (Ferro Silicon, Ferro Manganese & Silico Manganese) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Ferro manganese are alloys composed of iron and one or two more metals like Mn, Si, Ti, W etc. The ferro alloys have usually lower melting points than their respective alloying metals in pure stable form and thus, can be readily incorporated to obtain the metals as ferro alloys than in their pure terms starting from their ores. It is a principle alloying agent used in steel production steel/iron casting etc, where it also acts as a strengthener and deoxidiser. It imparts corrosion resistance to the products. Ferro manganese along with Fe-Si, Fe-Cr, is a bulk ferro-alloy, Manganese is also added in steels in the form of silico manganese. It dissolves in iron in all proportions, Iron for Farm implements uses upto 1.75% Mn and also in automobile parts. Ship construction industry uses steels with even higher content; riffle barrels and heat treated forgings necessarily use ferro manganese as an alloying additive.Ferro Alloys Plays major role in Steel Production and industrial development. Ferro-alloys are iron based alloys with varied elements introduced in steel making to cater to the specific needs. These are specified additions to the production of steel for various applications. Generally ferro-alloys are designated by base metal indicated as under such as: Ferro – silicon, Ferro – manganese, Silico – manganese, Ferro – chrome etc. Uses and Applications Ferro alloys are iron bearing alloys with additives which are passed on to steel to meet specific needs. The Ferro alloys are brittle and can be crushed to any size to be added to the molten steel as additives. Generally the additives as in steel are invariably added in the form of Ferro alloys. These are established additives in the steel production to obtain specific needs. Market Survey The demand for ferro alloys has been increasing with that of alloy and special steels. At the beginning of the previous decade, it was about half a million tonnes, increased to over 700,000 tonnes by 1997-98 and reached the level of 1.20 mn tonnes in 2006-07. There are six leading players and over 30 small producers. The industry has tied up with companies in Europe for technology inputs. The major users of alloy steel are: auto industry, railways, forgings, tubes, springs and other engineering industries.The leading players are Alloy Steel (SAIL), Mukand (Advanced Design Materials Corp., USA), Mahindra Ugine, Sunflag Irons & Steel, Vishveshvarya Steel, Kalyani Steel, Panchmahal, Indian Seamless, Shah Alloy Kalyani Carpenter.
Plant capacity: Ferro Silicon:59.0 MT/Day.,Ferro Manganese:167.0 MT/Day.,Silico Manganese:130.5 MT/Day.Plant & machinery: Rs.2493 Lakhs.
Working capital: -T.C.I: Cost of Project :Rs4280 Lakhs.
Return: 28.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

EDIBLE OIL REFINERY UNIT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Rice is grown over vast areas of land around the world and is a major staple food for more than half of the world population. Rice is an excellent source of nutrients, where protein contains the eight essential amino acids. Rice is a relatively good source of thiamin, riboflavin, niacin, phosphorous, iron and potassium and is also a good source of carbohydrates, which serves as a form of energy. Non-allergenic and gluten-free characteristics make rice ideal for persons with these special dietary requirements. Harvested rice is in the form of rough rice (paddy) with the edible portion covered with an outer protective layer known as the husk or hull. After being dried, the rice passes though Sheller machines to remove the hull material. Shelling produces brown rice, with a thin bran layer surrounding the rice kernel. Abrasive forces in the milling machine remove the outer bran layer on the brown rice and the resultant product is white rice. White rice is consumed after appropriate polishing to further remove any remaining bran layers and to give a desired degree of whiteness and polish. The rice hull and rice bran are obtained as by-products of the rice milling industry. Rice bran, which includes the pericarp, the aleurone and sub-aleurone layers, parts of the germ and the embryo as well as small portions of the starchy endosperm, is a valuable milling by-product. After milling, the immediate stabilization of rice bran using thermal treatment techniques deactivates enzymes responsible for its degradation. Stabilized rice bran is free from rancidity, off flavors, and bitter and soupy taste, and is suitable for further use and processing. Rice bran had gained significant attention after adequate progress in its stabilization techniques Bran, 10% of the weight of rough rice, is rich in oil (15- 22 %), depending on the milling procedure and the rice variety. Most crude oils and fats, whether obtained by pressing, solvent extraction or rendering are given a preliminary cleaning and clarification treatment by setting, screening, filtration or centrifugation to make them more resistant against deterioration during storage. When required for edible purposes they are nearly always given a further refining treatment, when intended for technical non edible purposes they also frequently need some treatment to remove impurities, degradation products or undesirable constituents which would interface with their use. Rice bran crude oils obtained by solvent extraction are given a preliminary cleaning and clarification treatment by allowing the crude oil to settle followed by screening, filtration or centrifugation to make them more resistant against deterioration during storage. Special characteristics of rice bran oil are the very marked resistance to oxidative rancidity. The stabilities of the refined, bleached and deodorized rice bran oil and the hydrogenated products are approximately twice those of comparable, commercially acceptable vegetable fat. USES AND APPLICATION Rice Bran Oil is a healthy oil with uses in cooking, frying, as a salad dressing, baking, soap making, as even a supplement to horses, dogs and other animals. Thus, Rice bran oil can be used as vegetable oil in the domestic purposes for consumer use. It can be used for hydrogenation purpose. It can be used for the extraction of fatty acids and glycerol from it.It is also use to treat nerve imbalance. The use of Rice bran oil not more than half a litre in a months is sufficient for good health. MARKET SURVEY Indian edible oil industry is composed of some 15,000 oil mills, 600 solvent extraction units, 250 vanaspati units and over 600 refining units. These employ over a million people.With around 8% of world oilseeds production, over 7% of global protein meal production, around 4% of world oil meal export, total oilseeds production of 23 mn tonne and 5.6 mn tonne of edible oil production, India is the fourth largest edible oil economy in the world valued at USD 16.5 bn (Rs 660 bn). India has a share of nearly 6% of global vegetable oil production, nearly 11% of global vegetable oil imports and 9% of global edible oil consumption. And yet over 40% of the edible oil availability in the market is sourced from imports. The edible oil segment is currently undergoing a metamorphosis as a result of spiralling prices of soft oils - sunflower and soyabean. Premium branded vegetable oil makers are expanding their product portfolio to include less-upmarket oils from cottonseed, groundnut or even palmolein in consumer packs. India has a potential to produce about 1.50 mn tonne of rice bran oil. Of this potential, only half or 750,000 tonne, is produced. Some 200,000 tonne of oil is being used as refined rice bran oil for cooking. The rest is used in vanaspati. There are some 30 plants refining crude rice bran oil. PRESENT MANUFACTURERS Agrawal Oil Extractions Ltd. Globus Industries & Services Ltd. J R Foods Ltd. Kedia Overseas Ltd. Morinda Overseas Inds. Ltd. Rajaram Solvex Ltd. S K M Animal Feeds & Foods (India) Ltd. Shanti Kunj Solvent Ltd. Sree Tulasi Solvent Extractions Ltd. Sri Murugarajendra Oil Industry Ltd. Thapar Agro Mills Ltd.
Plant capacity: 80 MT/DayPlant & machinery: Rs. 962 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 2113 Lakhs
Return: 27.62%Break even: 46.86%
Add to Inquiry Add to Inquiry Basket

Aluminium Fluoride - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Aluminium fluoride is used in many industrial processes. It is one of the minor constituents added to the electrolytic cells during the production of metallic aluminium. It is also used in the preparation of white enamels, as an anti-reflection coating in complex optical systems, as a constituent in welding fluxes, and in the preparation of fluorine containing glasses, Aluminium fluoride (AlF3) is an inorganic compound used primarily in the production of aluminium. This colorless solid can be prepared synthetically but also occurs in nature. It is used in the production of aluminium metal. Uses Aluminium fluoride is primarily used in the production of aluminium. It is a critical additive to the molten electrolyte in aluminium metal production. Using today's technologies, it is impossible to manufacture aluminium without AIF3. Adding AIF3 allows the electrolytic process to take place at a temperature around 850°C, which is considerably lower than the melting point for aluminium oxide (Al2O3, mp ab. 1,500°C). As a result of its temperature-lowering properties, AlF3 has a definite energy saving effect. The industrial and use categories of AlF3 are IC8, UC40 and UC43. The main use of AlF3 is as a temperature-regulating agent, a pH-regulator and as a solubility enhancer of aluminium oxide in the electrolyte solution in the production process of aluminium. The use of AlF3 as such results in a lowering of the energy consumption in the aluminium pot. The raw material (aluminium oxide) is melted and split in aluminium and oxygen. The minor downstream uses of AlF3 are for metal treatment and for optical coating as an essential component of antireflective coatings and in semiconductors. A total of 52 tonnes of AlF3 was sold to traders, for which it is also assumed that it is used for other purposes than aluminium production. As no other significant uses were reported, neither by producers nor by downstream users, it is assumed that the main application is for production of aluminium, which is in general agreement with the information provided by the producers (> 99.6% used for aluminium production). As a consequence the risk assessment will focus on this particular use. Market Survey The Indian aluminium industry’s enthusiasm to grow smelting capacity on an ambitious scale here and abroad - the wanderlust is that of Nalco - was not dimmed in any way by the adverse performance of the metal during the recession. If all projects of Hindalco get commissioned on revised schedule, then it will see smelting capacity rising to 1.7 million tonnes from 500,000 tonnes and alumina refining capacity to 6.5 million tonnes from 1.7 million tonnes by 2013. Meanwhile, Novelis acquisition has given Hindalco global leadership in that value added segment where path breaking technologies are in application. Vedanta has arrived on the Indian aluminium scene much later than Hindalco and Nalco. While it has made up for the lost time by gaining control of Balco and Madras Aluminium, Vedanta is aggressively building new capacity through greenfield and brownfield routes. Aluminium fluoride (otherwise known as aluminum trifluoride) is a crystalline powder that is slightly soluble in water. It is mainly used in the production of aluminum metal. Aluminium Fluoride is able to decrease the melting point of electrolytes in the smelting process and improve the production efficiency. It is also utilized as a flux in welding applications; in the manufacture of ceramics and glass; in the making of aluminum silicates. The aluminium fluoride industry comprises a large number of players operating the world over. Lifosa AB, South Ural Cryolite Plant OJSC, Do-Fluoride Chemicals Co. Ltd. and S. B. Chemicals are amidst the most prominent manufacturers. The electrolytic bath in an aluminium electrolysis cell contains 80% synthetic cryolite (AlF3). Operating losses of fluorine from the cell are made up almost exclusively by the addition of further AlF3. The recent global economic crisis brought to the forefront and accelerated trends in the AlF3 market which have been evident for some time. It has become even more apparent that aluminium smelting should be carried out where the producer has access to energy sources which are abundant and relatively inexpensive. Similarly AlF3, which depends more on raw materials than energy, should be manufactured where the raw materials are abundantly available at a reasonable cost. It does not matter where the customers for aluminium or AlF3 are located but it does matter where the energy and raw materials are located.
Plant capacity: 6700 MT/AnnumPlant & machinery: Rs. 518 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 1794 Lakhs
Return: 29.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Maize and It’s by Products - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Maize is one of the cereal grains which produces throughout India and is placed 3rd position in agricultural base production. The Starch industry in India is poised to rapid strides once again keeping behind the impacts of the global recession during recent years. The target of indigenous production of over 6 million MT will require the Indian Starch industry to increase their production during the next ten years. There are about 17 wet milling units with a crushing capacity of about 3400 MT of maize/day. The average processing capacity of the units in India is 200 MT of maize/day. In case of Starch, as the supply demand gap is about 60% the starch can very easily be marketed in the Country and also Starch and Gluten have good Export Potential as well. India exports these products to Sri Lanka, South East Asian countries, Bangladesh and South Africa. The husk can be sold locally, the steep liquor which produce antibiotics and microbial products and corn oil can be marketed outside the state as there is good demand for it. Hence the maize processing unit if set up in the State, will flourish and catch up the market very easily. There is good domestic market and export potential for maize starch and by-products. New entrepreneurs can well venture into this sector. Few Major Players are named as under: Amaravati Agro Ltd. Bharat Starch Inds. Ltd. E I C L Ltd. Gayatri Bioorganics Ltd. Gujarat Ambuja Proteins Ltd. Gulshan Polyols Ltd. Hindustan Maize Products Ltd. Indian Maize & Chemicals Ltd. International Bestfoods Ltd. Jayant Vitamins Ltd. K G Gluco Biols Ltd. Kamala Sugar Mills Ltd. Laxmi Starch Ltd. Origin Agrostar Ltd. Rai Agro Inds. Ltd. Riddhi Siddhi Gluco Biols Ltd. Santosh Starch Ltd. Santosh Starch Products Ltd. Sayaji Industries Ltd. Starch & Chemicals Ltd. Sukhjit Starch & Chemicals Ltd. Tan India Ltd. Tirupati Starch & Chemicals Ltd. Unicorn Organics Ltd. Unique Sugars Ltd. Universal Starch-Chem Allied Ltd. Wockhardt Health Care Ltd.
Plant capacity: 78300 MT /AnnumPlant & machinery: Rs.5340 Lakhs
Working capital: -T.C.I: Cost of Project:Rs. 6916 Lakhs
Return: 17.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Rice Mill, Rice Bran Oil with Captive Power Plant (Integrated Unit)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Paddy is the most important and extensively grown food crop in the World. Rice grain (Oryza sativa) along with hulls/husk is known as paddy. Paddy seed contains a rough, hard and woody outer covering, called husk which make paddy as such inedible. It is the staple food of more than 60 percent of the world population. The rice which is obtained after milling is called raw rice. Nearly 60% of the total rice produced in India is subjected to parboiling. Parboiling is a hydrothermal treatment of paddy followed by drying before milling for the production of milled parboiled rice. In general, three major steps in parboiling i.e., soaking, steaming and drying have a great influence on the final characteristics and quality of parboiled rice. India is a second largest producer of rice in the world. On an average India produces 130 million tonnes of paddy and 79 million tonnes of milled rice. According to the solvent Extractor's Association of India, the total production of oil from indigenous sources amounted to 76.2 lakhs tonnes in oil year 2003-2004 and in the current oil year this is expected to rise to around 80.6 lakhs tonnes. The government estimated that the total shortfall in supply was of the order of about 6 lakhs to 7 lakhs tonnes. However, it imported about 11 lakhs tonnes last year, which is expected to go up to about 15 lakhs tonnes in the current year. Few Indian Major Players are as under:- A V I Export (India) Ltd. Agrawal Oil Extractions Ltd. Ambalica Enterprises Ltd. Ankit India Ltd. Arvind Kumar Nand Kumar Ltd. B C L Industries & Infrastructures Ltd. B G H Exim Ltd. Cargill India Pvt. Ltd. Chaman Lal Setia Exports Ltd. Daawat Foods Ltd. Dolphin International Ltd. Doon Valley Rice Ltd. Emmsons International Ltd. G R M Overseas Ltd. Goel International Pvt. Ltd. Graintec India Ltd. Jagdamba Foods Ltd. K J International Ltd. K R B L Ltd. Kohinoor Foods Ltd. L T Foods Ltd. Lakshmi Energy & Foods Ltd. M K International Ltd. Mega (India) Ltd. Modern Flour Mills Ltd. Navjivan Roller Flour & Pulse Mills Pvt. Ltd. Olam Exports (India) Ltd. Oswal Agro Furane Ltd. P K S Ltd. Padam Cotton Yarns Ltd. Petro Plast Industries Ltd. Punjab Basmati Rice Ltd. Punjab Greenfield Resources Ltd. R T Exports Ltd. Rameswarlal & Co. Ltd. Rashel Agrotech Ltd. Rei Agro Ltd.
Plant capacity: 17658100 MT/ Annum,Rice: 1296000 MT/ Annum,Rice Bran Oil: 6000 MT/ Annum,Deoiled Rice Bran Cake: 22500 MT/ Annum,Salable Power: 1750000 UnitsPlant & machinery: Rs.2391 Lakhs
Working capital: -T.C.I: Cost of Project: Rs.8269 Lakhs
Return: 32.00%Break even: 33.00%
Add to Inquiry Add to Inquiry Basket

Baby Diaper & Sanitary Napkins - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. When diapers become soiled, they require changing; this process is often performed by a second person such as a parent or caregiver. Diapers are primarily worn by children who are not yet potty trained or experience bed wetting. However, they can also be used by adults with incontinence or in certain circumstances where access to a toilet is unavailable. These can include the elderly, those with a physical or mental disability, and people working in extreme conditions such as astronauts. It is not uncommon for people to wear diapers under dry suits. Some disposable diapers include fragrances, lotions or essential oils in order to help mask the scent of a soiled diaper or to protect the skin. Care of disposable diapers is minimal, and primarily consists of keeping them in a dry place before use, with proper disposal in a garbage receptacle upon soiling. Stool is supposed to be deposited in the toilet, but is generally put in the garbage with the rest of the diaper. As a whole establishing Baby Diaper & Sanitary Napkin is one of the project which has good prospect for the entrepreneurs to invest. Few Indian Major Players are as under:- Carewell Hygiene Products Ltd. Centron Industrial Alliance Ltd. Dhanalaxmi Roto Spinners Ltd. Diapers India Ltd. Godrej Consumer Products Ltd. Gufic Biosciences Ltd. Johnson & Johnson Ltd. Kimberly Clark Lever Pvt. Ltd. Mediklin Healthcare Ltd. Mirah Dekor Ltd. Procter & Gamble Hygiene & Health Care Ltd.
Plant capacity: Rs. 378 Lakh Pkts. /Annum, Baby Diapers: Rs. 135 Lakh Pkts. /Annum,Adult Diapers: Rs. 54 Lakh Pkts. /Annum,Sanitary Napkins: Rs. 189 Lakh Pkts. /AnnumPlant & machinery: Rs. 856 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 2984 Lakhs
Return: 31.00%Break even: 38.00%
Add to Inquiry Add to Inquiry Basket

Maize and its By Products (Maize Starch, Modified Starches & Animal Feed)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Maize and its By Products (Maize Starch, Modified Starches & Animal Feed) Corn starch, corn flour or maize starch is the starch derived from the corn (maize) grain. The starch is obtained from the endosperm of the corn kernel. Corn starch is a popular food ingredient used in thickening sauces or soups, and is used in making corn syrup and other sugars. Starch or amylum is a carbohydrate consisting of a large number of glucose units joined by glycosidic bonds. This polysaccharide is produced by most green plants as an energy store. It is the most common carbohydrate in human diets and is contained in large amounts in such staple foods as potatoes, wheat, maize (corn), rice, and cassava. Starch is processed to produce many of the sugars in processed foods. Dissolving starch in warm water gives wheat paste, which can be used as a thickening, stiffening or gluing agent. The biggest industrial non-food use of starch is as adhesive in the paper making process. Starch can be applied to parts of some garments before ironing, to stiffen them. Maize Starch is a mixture of polysaccharides about 74% amylopectin and 26% amylose. It is a fine White Powder, odorless, taste slight and characteristic and microbiologically suitable as Pharmaceutical grade, useful in Pharmaceutical and Food Industry as a binder, thickener, disintegrating agents in tableting and various formulations. Starch derivative is a growing industry, and with technological advancements taking place, new products are being launched on a regular basis. The various stakeholders in the industry are the raw material suppliers, processors, and the product manufacturers. Starch derivatives are applied in food & beverages, feed, and non-food applications like, pharmaceutical, cosmetics, paper making, bioethanol, and other industrial applications. Asia-Pacific Holds the largest market share in the global starch derivatives market, by geography, and is also estimated to achieve the highest growth rate. Any entrepreneurs venture into this field will be successful. Few Indian Major Players are as under • Advanced Bio-Agro Tech Ltd. • Advanced Enzyme Technologies Ltd. • Anil Nutrients Ltd. • Aries Agro Ltd. • Aries Marketing Ltd. • Godrej Agrovet Ltd. • Hanuman Minor Oils Ltd. • Indo Euro Indchem Ltd. • Intercorp Biotech Ltd. • Jupiter Biotech Ltd. • K S E Ltd. • Kapila Krishi Udyog Ltd. • Kerala Feeds Ltd. • Maharashtra Agro-Inds. Devp. Corpn. Ltd. • Metahelix Life Sciences Ltd. • Origin Agrostar Ltd. • Pan Asia Global Ltd. • Rama Pashu Aahar Pvt. Ltd. • S O L Ltd. • Shalimar Pellet Feeds Ltd. • Snam Vijaya Feeds Ltd. • Sonitpur Solvex Ltd. • Sukhjit Starch & Chemicals Ltd. • Superhouse Ltd.
Plant capacity: Maize Starch : 37.50 MT/day•Modified Starch : 45 MT/day•Animal Feed:45 MT/dayPlant & machinery: Rs 1105 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2894 Lakhs
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Medical College with Hospital - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

A medical college is meant to impart education of medical field to students to qualify them as doctors in different specialized disciplines so as to treat patients suffering from various ailments. Doctors with their dedicated spirit serve the nation at large by providing medication and treatment for eradication of diseases, which exchange health and add suffering to humanity. Normally a medical college is associated with a hospital. Hospitals provide the facilities of O.P.D. and admission for seriously ill seriously injured, seriously burnt and pregnant ladies, causalities etc. Presently, every city or town in India has no. of private hospitals furnished with latest medical facilities available and with more qualified surgeons, physicians and specialist doctors. Even sometimes, they are furnished with more modern machines than those available in the nearby Government Hospital. These hospitals can be seen well crowded as they provide very good service at a smile. As they are run by privates very good medical care is provided by them. A private hospital is a place where one may get treatment from ordinary fever to a major surgery operation. As a matter of fact, no limitation has been made for the facilities available in a hospital. However, generally all private hospitals are provided with latest facilities and ultra modern machines. In a hospital, surgeons, physicians, E.N.T., specialists, children specialist, Eye-surgeon, psychologists and sex-specialist are essential.
Plant capacity: Total Students per Annum:150 Students Admitted/Annum 700 Beded HospitalPlant & machinery: Rs 2047 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 31862 Lakhs
Return: 1.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 6 of 34 | Total 335 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 33 34   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top