Google Search

Search

Already a Member ?

Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 196 of 254 | Total 2532 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 196 253 254   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Start a Manufacturing Unit of Razor Blade for Safety Razors and Disposable Safety Razors. Men's Shaving Products Industry Opportunities.

Safety razor users claim that because they aren't dragging up to five blades across their skin at once, they experience less irritation and ingrown hairs. The anatomy of a safety razor is simple to understand. The head of a three-piece razor is made up of a cap and a plate that brace the razor blade. The handle, which might be constructed of metal or wood, is commonly twisted into these. The sort of razor's head is a topic that gets a lot of attention. A safety bar is built into every plate, and it lies immediately below the razor blade. Related Projects: Industrial & Engineering Products, Manufactured Goods, Industrial Engineering Products. Mechanical, Engineering, Automobile Industries, Metal, Metallurgical, S.S. Utensil, Wire, Aluminum, Brass, Copper Products, LPG Cylinder and Valves The double-edged safety razor has two open edges and a slant bar that can be used on both sides. The double-edged safety razor's blade is slightly bent to provide a smoother, cleaner shave. The blades used in Razors are known as Razor Blades. These are a thin, flat metal piece with sharp edges. The razor blades are used to remove unwanted hair from the face and other regions of the body. Razor blades cannot be sharpened since they are fixed within the razor. These blades can, however, be replaced with a new razor blade. Razor blades are extremely thin and sharp, allowing for extremely delicate shaving precision. A razor blade is a flat piece of metal with a sharp edge that is used to cut hair. It's used to get rid of unsightly body and facial hair. Start an Industry in Lakshadweep, Click Here Start a Business in Vietnam, Click Here Benefits: Shaving is a part of many people's lives to some extent or another. Safety razors & Disposable Safety Razor are virtually always better than cartridge-based shavers, whether on the face, head, legs, armpits, or elsewhere. Some Benefits of Safety Razors and Disposable Safety Razors: 1. A Closer Shave: Safety razors eliminate a lot of the uncertainty involved in shaving. Because the blade's edge is the only point of touch with your flesh, it's simple to obtain a sense of what will be sliced. 2. Cost Effective: While purchasing a double edged razor may appear to be costly at first, it is really cost effective in the long run when considering that the only thing you will need to purchase are the blades, which are actually less expensive than cartridge blades. Books:- BOOKS & DATABASES 3. Less Skin Irritation: One of the most obvious ways in which safety razors outperform other razors is in the area of razor burn, or the irritation caused by shaving. 4. More Exact Lines: Safety razors make shaving more precise. Cartridge-based blades feature two to seven blades and their razors are wrapped in plastic buffers. Start an Industry in Madhya Pradesh, Click Here Start a Business in Tanzania, Click Here Market Outlook: In the years 2020-2026, the global double edge razor blade market is expected to rise at a significant rate. The market's growth can be due to people switching from traditional razors to double edge sensors since they are easier to use and reduce the danger of shave burn. The double edge razor's main commercial constraint is its higher initial expenditure. Related Videos: Industrial & Engineering Products, Manufactured Goods, Mechanical, Automobile, Metal, Metallurgical, Wire, Aluminum, Copper Products, LPG Cylinder Furthermore, in the case of this type of razor blade, an individual must learn how to shave effectively. The expanding urge to look well groomed, increased per capita income, and expanding urbanization are all contributing to this increase. Men's grooming industry demand has expanded in recent years as a result of growing male customer awareness of their appearance. Market Research: - Market Research Report Furthermore, because more than half of the population is under the age of 30, the industry has a large local market. Furthermore, the market is predicted to rise through 2025 due to an increase in the urban middle class population and enhanced distribution channels in tier II and tier III cities. Start an Industry in Maharashtra, Click Here Start a Business in South Africa, Click Here Major Key Players: 1. Gillette (PandG) 2. Edgewell Personal Care 3. BIC 4. Laser Razor Blades 5. Benxi Jincheng 6. Kaili Razor 7. Ningbo Jiali 8. Liyu Razor For More Details: https://bit.ly/3guIDVs #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #SafetyRazor #ShavingProducts #MensGroomingIndustry #MensGroomingProduct #MensGroomingMarket #mensgroomingtrends
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Small Volume Parenteral Solutions (SVPs) Manufacturing Plant. Opportunities in Business of Pharma.

SVP includes all sterile items packaged in vials, ampoules, cartridges, syringes, bottles, or any other container with a capacity of 100mL or less. Although topically applied to the eye rather than delivered by injection, ophthalmic products packaged in squeezable plastic containers As long as the container size is 100ml or less, they are classified as Small Volume Injections (SVI). Related Project: Emerging Business of Small Volume Parenteral Solutions SVPs Start Investing in Most Growing Business of Pharmaceutical Because of local irritation, SVP aqueous solutions can be given intravenously. Small volume parenteral medicines come in a range of forms and can be made and packed in a variety of ways, including: Pharmaceuticals, etc. Genetically engineered or biotechnology products, biological goods, diagnostic agents, allergenic extracts, radiopharmaceutical products, dental goods, genetically engineered or biotechnology goods Liposomes and lipid products are two types of lipids. Start an Industry in Jharkhand, Click Here Start a Business in Oman, Click Here Applications of Small Volume Parenteral Solutions (SVPs): Local anesthetics, vaccinations, and other injectable medications are among the things that Small Volume Parenterals can be used for. Typically, the 10 to 100 mL range is used for multi-dose applications. Local anesthetics, vaccinations, and other injectable medications are among the things that Small Volume Parenterals can be used for. Typically, the 10 to 100 mL range is used for multi-dose applications. Single or several doses of small volume parenterals are available. In most cases, the volume is less than or equal to 100 ml. Related Books: Pharmaceutical, Drugs, Proteins Technology Handbooks The majority of medications are dispensed via small volume parenterals. When taken orally, medications that are poorly absorbed, inactive, or ineffective can be used. The IV method has a quick beginning of effect. To induce a gradual or delayed beginning of effect, intramuscular and subcutaneous methods can be employed. Problems with patient concordance can be avoided. Start an Industry in Karnataka, Click Here Start a Business in Nepal, Click Here Market Outlook: The Global Small Volume Parenterals (SVP) Business is a thorough reference for newcomers to the market. The global Small Volume Parenterals (SVP) market's growth prospects for 2018-2023. Because of the rise in biologics and complicated active pharmaceutical ingredients (APIs) in development, parenteral medications have become a significant portion of the pharmaceutical business. Market Research: - Market Research Report Parenteral medications are medicinal formulations that are administered by a route other than the mouth or anally. Before being absorbed into the body, all enteral preparation must pass via the stomach and liver, where a significant portion is eliminated or changed. As a result, parenteral preparations are created for medications that must reach target organs in a near-unaltered state. Books: - BOOKS & DATABASES With these preparations, the time it takes to reach a therapeutic blood level is also reduced. These medications are currently in high demand due to the global rise in all types of illness, particularly chronic diseases that require long-term treatment. Due to the fact that parenteral entrance generally necessitates basic paramedic expertise, these medications are rarely self-administered and are only found in professional healthcare settings. Related Videos: Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Pharmaceutical Bulk Drugs The parenteral market is expected to grow in tandem with the rise in demand for good healthcare. Due to the fact that parenteral entrance generally necessitates basic paramedic expertise, these medications are rarely self-administered and are only found in professional healthcare settings. The parenteral medication industry is expected to grow in tandem with the rise in demand for decent healthcare. Start an Industry in Kerala, Click Here Start a Business in Mozambique, Click Here Major Key Players: 1. Allergan 2. Bayer 3. GSK 4. JandJ 5. Pfizer 6. Teva 7. Novartis For More Details: https://bit.ly/3pTMwYd #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #Parenterals #PharmaIndustry #PharmaMarketing #PharmaBusiness #PharmaMarketingOpportunity #PharmaOpportunity #PharmaProduction #PharmaManufacturing #pharmaceuticalMarket #pharmaMarketGrowth
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Ductile Iron Pipe Fittings Manufacturing Business. Investment Opportunities in Pipe Fitting Business.

Pipe Fittings are a piping component that aids in the installation of piping. Elbows and tees change the direction of the flow. Reducers and reducing tees change the size of the pipe. Different components, like as couplings, are used to connect and stop flows, whereas Caps are used to stop the flow. Depending on the material, characteristics, and purposes of the pipes and fittings used, pipe joints can be secured in a variety of methods. The installation or repair of pipes or tubes is referred to as pipe fitting. Related Projects: Business of Pipes and Tubes Pipes and tubes are required for a variety of purposes. Pipe fittings are a diverse group of goods that come in a variety of shapes, sizes, and materials. The push-on connection is the most common, quickest, and easiest-to-assemble joint for Ductile Iron pipe and fittings in underground applications. This connection is made up of a single rubber gasket that is inserted into a groove within the socket at the pipe's bell end. Ductile iron pipes are easy to connect, can be laid in any weather, and don't always require special backfill. It is the appropriate pipeline material for a wide range of applications due to its high safety factor and ability to accommodate ground movement. Start a Business in Swaziland, Click Here Start an Industry in West Bengal, Click Here Benefits: 1. Once installed, it requires relatively little care and is expected to endure at least 100 years. 2. Ductile Iron Pipe is a 100 percent recyclable material that has up to 90% recycled content. 3. Lower expenses due to improved flow capacity result in significant energy savings over the pipe's service life. Ductile Iron is cost-effective. Books: - BOOKS & DATABASES 4. It can handle the harshest environments, including high-pressure applications, tremendous earth and traffic loads, and unstable soil conditions. 5. It is more ductile than grey iron. 6. Impact resistance is higher than grey iron. 7. More durable than grey iron 8. Grey iron is heavier and more difficult to place. 9. Joints are easy to work with. Start a Business in Tunisia, Click Here Start an Industry in Tripura, Click Here Market Outlook: The market for Ductile Iron Pipes was $4,600 million in 2017 and is predicted to reach $9,428 million by 2026, rising at an annual rate of 8.3%. The primary application of ductile iron pipes is in the delivery of drinking water. Supply system breakdowns result in portable water losses. Due to increased demand for these pipes in developing nations, the worldwide ductile iron pipes market is expected to grow at a significant rate during the forecast period. Related Videos: Industrial & Engineering Products, Manufactured Goods, Mechanical, Automobile, Metal, Metallurgical, Wire, Aluminum, Copper Products, LPG Cylinder The global market for ductile iron pipes is fragmented due to the presence of several manufacturers all over the world. The market for ductile iron pipes has grown significantly due to the unprecedented growth of end-use industries. Drinking water distribution, wastewater, irrigation, mining, and other applications make up the worldwide ductile iron pipe market (including pump stations and process and treatment works). Start a Business in Zimbabwe, Click Here Start an Industry in Puducherry (Pondicherry), Click Here Major Key Players: 1. Deccan Mechanical & Chemical Inds. Pvt. Ltd. 2. Disa India Ltd. 3. Ductile Castings Ltd. 4. E S L Steel Ltd. 5. Electrosteel Castings Ltd. 6. Jainsons Corporation Ltd. 7. Jindal Saw Ltd. 8. Mcwane India Pvt. Ltd. For More Details: https://www.entrepreneurindia.co/project-and-profile-listing?CatId=80&SubCatId=80&CatName=PIPE%20&%20TUBES #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #ProjectReport #startup #projectconsultancy #businessopportunity #DuctileIronPipeFittings #ductileironfittings #pipefittings #DuctileIronPipe #ironfittings
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of Silicon Metal. Investment Opportunities in Profitable Industry.

Silicon metal is a semi-conductive grey metal that is used in the production of steel, solar cells, and microchips. Silicon is the second most plentiful element in the earth's crust (after oxygen) and the universe's eighth most common element. Silicon accounts up over a third of the weight of the earth's crust. Silicon is the eighth most abundant element in the universe by mass, yet it is extremely rare in the Earth's crust as a pure element. It is most widely spread in space as various forms of silicon dioxide (silica) or silicates in cosmic dusts, planetoids, and planets. Silicate minerals make up more than 90% of the Earth's crust, making silicon the second most abundant element in the crust (approximately 28 percent by mass) behind oxygen. Silicon is a naturally occurring element with a 400-year residence duration in the world's oceans when not previously there. Uses of Silicon Metal: Commercially, silicon is used without being separated and with minimal processing of the native minerals. Clays, silica sand, and stone are used in industrial construction. Silicates are found in Portland cement, which is used to manufacture mortar and stucco, as well as concrete for walkways, foundations, and roadways. They're also found in whiteware ceramics like porcelain, as well as standard silicate-based soda-lime glass and a variety of speciality glasses. Silicon carbide, for example, is employed as an abrasive and as a component of high-strength ceramics. Silicon is the main component of silicones, which are commonly used synthetic polymers. Market Outlook: The global silicon metal market was worth USD 6.05 billion in 2019 and is predicted to increase at a CAGR of 4.6 percent between 2020 and 2027. The market is likely to be fueled by rising aluminium output around the world. Various reasons are currently driving the global silicon metal market, including a rise in demand for aluminium alloys in the automotive industry, an increasing silicone application spectrum, demand from energy storage industries, and consistent demand from the worldwide chemical sector. Growing use of silicon metal in solar panel manufacture and a focus on lowering silicon metal production costs will help the global silicon market grow in the future. Silicon metal is already a critical component of the metal smelting industry; however, demand for the material has risen in recent years, owing primarily to the electronics and solar industries. In 2019, Asia Pacific dominated the Silicon metal market, with a revenue share of 38.3 percent. The presence of a big aluminium and silicone production base in China is responsible for this high proportion. In addition, China is the world's largest manufacturer of silicon metal. China's market is oversupplied, and as a result, the country exports a significant amount of its product. Partially consolidated is the silicon metal market. The market is divided into two categories based on product type: metallurgy grade and chemical grade, with metallurgy grade dominating the market. Aluminum alloys, semiconductors, solar panels, stainless steel, and other applications are the segments of the market. Major Key Players: 1. Gravita India Ltd. 2. Kothari Metals Ltd. 3. Oswal Minerals Ltd. 4. Singhania Minerals Pvt. Ltd. 5. Welcome Impex Pvt. Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Lucrative Business Opportunities in Production of Medium Density Fiberboard (MDF). Increasing Demand of Wood and Wood Based Products.

MDF (Medium Density Fibreboard) is a type of reconstituted wood panel. It's a solid, dry-processed fibreboard made from wood fibres rather than veneers or particles. It's denser than plywood and particleboard. MDF has a consistent density and is smooth on both sides. MDF is reconstituted into a variety of widths and lengths of wood sheets. The inclusion of synthetic resin adhesives, which are cured under heat and pressure, achieves bonding. Because of its weak moisture resistance, MDF is mostly used for inside applications. It comes unfinished with a fine sanded surface or with a decorative overlay like wood veneer, melamine paper, or vinyl. The following are the different types of MDF (which are sometimes classified by colour): 1. MDF plate that is extremely light (ULDF) 2. Moisture-resistant plywood is usually green in colour. 3. MDF that is fire resistant is usually red or blue in colour. Advantages of Medium Density Fiberboard: 1. Moderate Density Fibreboard has no grain and may be drilled and sliced without damaging it. Its great density allows equipment to be used on it. 2. It is free of kinks and knots and has a smooth surface. 3. Unlike actual wood, MDF does not flex or expand as a result of temperature changes. The swelling that happens in MDF as a result of moisture exposure is likewise minor. 4. Because of its high density, MDF holds hinges and screws better. 5. Unlike raw wood, which takes a long time to dye, MDF is simple to stain and colour. 6. MDF can be easily cut and carved into various designs due to its smooth edges. 7. To simulate genuine wood, the panel can be stained or painted. MDF panels can also be covered in laminates and wood veneers to make them look like real wood. Market Outlook: The global market for medium density fiberboard was worth USD 61.3 billion in 2019 and is predicted to increase at a CAGR of 6.6 percent from 2020 to 2027. The growing use of the product in furniture and building applications is projected to drive demand. The MDF market is being driven by an increase in demand for MDF for furniture, as well as the widespread usage of these boards in building materials. Because of expanding product application in furniture and building applications, as well as technical breakthroughs and improvements in production, the global medium density fiberboard (MDF) market is predicted to rise rapidly. One of the key factors contributing to the global MDF market's growth is the increasing building and construction industry, particularly in emerging countries. In 2019, Asia Pacific dominated the MDF market, accounting for 61.0 percent of total market share. In the construction industry, increased construction investment in emerging nations to fulfil rising residential housing demand is predicted to be a major factor boosting demand for MDF panels. The rising usage of recycled wood fibres in MDF production has also helped to propel the medium density fiberboard industry forward. Growing manufacture of environmentally friendly MDF products will provide new market prospects. All of these reasons are expected to boost demand for medium density fiberboard in the future years. Major Key Players: 1. Amazon Wood Pvt. Ltd. 2. Aryan Enterprises Pvt. Ltd. 3. Asian Pre-Lam Inds. Pvt. Ltd. 4. Associate Decor Ltd. 5. Bajaj Eco-Tec Products Ltd. 6. Best Board Ltd. 7. Darshan Boardlam Ltd. 8. Divine Board Pvt. Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Set up a Profitable Business of Oxygen Gas Plant. Rising Demand of Oxygen, Due to Covid-19 Pandemic.

Oxygen (O) is a nonmetallic chemical element in Periodic Table Group 16 (VIa, or the oxygen group). Oxygen is a colourless, odourless, and tasteless gas that is taken up by animals, who then convert it to carbon dioxide; plants, on the other hand, use carbon dioxide as a carbon source and return oxygen to the environment. Oxygen produces compounds when it reacts with nearly every other element, as well as when it reacts with other elements to displace them from their combinations; in many circumstances, these reactions are accompanied by the evolution of heat and light, and are referred to as combustions. Water is the most crucial component. Medical oxygen is a high-purity oxygen that is developed for use in the human body and is utilised for medical treatments. To avoid contamination, medical oxygen cylinders only contain high-purity oxygen gas; no other gases are permitted in the cylinder. An oxygen concentrator should have a medical grade oxygen content of no less than 90.0 percent and no more than 96.0 percent. When looking at appropriate oxygen saturation levels, it's also necessary to consider altitude. Because it is classified as a drug, it must meet FDA regulations for compressed medical gas. One of the requirements is that oxygen cylinders be thoroughly emptied at all times to reduce the danger of contamination. One of the requirements is that oxygen cylinders be thoroughly emptied at all times to reduce the danger of contamination. Benefits of Medical Oxygen Gas: Oxygen is utilized as a medical treatment in both chronic and acute instances, and it can be administered in a hospital, a pre-hospital setting, or completely outside of a hospital setting. It is used for emergency resuscitation, anesthetic, life support for patients who are unable to breathe on their own, and oxygen treatment. Athletes also take medicinal oxygen during training or at high elevations. Medical oxygen is used for the following purposes: 1. Serve as a foundation for almost all modern anesthetic procedures. 2. Improve oxygen availability to restore tissue oxygen tension in a variety of diseases, including COPD, cyanosis, shock, severe bleeding, carbon monoxide poisoning, serious trauma, and cardiac/respiratory arrest. 3. Assist with resuscitation. 4. Provide artificially ventilated patients with life support. 5. Support cardiovascular health. Market Outlook: In value terms, the global medical oxygen market was valued at USD4572.39 million in 2020, and it is expected to increase at a CAGR of 7.02 percent to USD6712.32 million by 2026. The rising frequency of respiratory illnesses among the population is driving the global medical oxygen market. Furthermore, significant elderly population rise is expected to boost market growth during the predicted period. Furthermore, the growing demand for home healthcare facilities is likely to boost the market's growth in the coming years. The market is projected to be restrained by increased knowledge and adoption of alternative products such as oxygen concentrators. Technological improvements are allowing the introduction of unique oxygen supply items, which will act as a restraint on the oxygen gas industry. Rising Demand of Oxygen Gas in COVID-19 Pandemic: The world has been hammered severely by the second wave of coronavirus infections. The new surge in COVID-19 cases has increased demand for medical oxygen, a vital commodity in treating the respiratory condition, putting significant strain on the nation's medical infrastructure. Over the last six months, the demand for oxygen in hospitals has reportedly increased by 600-800 percent. From treating heart failure and pneumonia to asthma and COVID-19, oxygen therapy has the potential to save millions of lives. Covid-19 has had a favorable impact on the worldwide medical gas oxygen market's growth. The increased number of COVID-19 cases has fundamentally driven the demand for medical oxygen gas for intensive care during the Covid-19 pandemic. Because of the rising number of COVID-19 patients, the demand for oxygen has increased to 1.1 million cylinders in low to middle income nations alone. Preventive steps are being taken in a number of nations to ensure a sufficient supply of oxygen for COVID-19 patients.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Investment Opportunities in Business of Surgical Hand Gloves. Rising Demand of Surgical Hand Gloves in Covid-19 Pandemic.

Surgical gloves are an essential element of a surgeon's or physicians daily attire. The purpose of these gloves is to keep both the health care professional and the patient safe from hazardous infections and pollutants. Gloves must be discarded after each usage to keep doctors and surgeons safe from disease transmission. Surgical gloves' principal function is to act as a protective barrier between healthcare workers and patients during surgical procedures, preventing disease transmission. A sterile glove that is worn to protect the hand from potentially infectious items and to prevent contamination of the patient during invasive operations. Surgical gloves with novel materials such as polyisoprene are currently on the market, however surgeons continue to choose latex for surgical gloves. Surgical gloves with a polymer inside layer are available to make wearing gloves easier whether your hands are wet or dry. Other enhancements include under-glove indications that are utilised while double-gloving to notify surgeons of impending glove punctures. Surgical gloves for antisepsis are standard practise in all medical facilities. Surgical gloves, on the other hand, have been used for a variety of purposes in the field of plastic and reconstructive surgery, in addition to antisepsis. Surgical gloves, on the other hand, have been used for a variety of purposes in the field of plastic and reconstructive surgery, in addition to antisepsis. Surgical gloves are commonly used by doctors, nurses, carers, dentists, and other healthcare professionals. Gloves should be worn during any patient-care activities that could expose them to blood or other bodily fluids (including contact with mucous membranes and non-intact skin), as well as during contact precautions during outbreaks. Gloves are a waste of resources when they are not required, and they do not contribute to a reduction in Cross-transmission. Market Outlook: The Surgical Gloves Market was valued at over USD 2 billion in 2019 and is expected to increase at a CAGR of over 10.5 percent between 2020 and 2026. The growing prevalence of communicable illnesses is driving the global surgical glove market. Some of the primary drivers driving market expansion include an increase in the number of surgical procedures performed around the world, as well as an increase in the rates of numerous chronic and acute diseases, as well as increased worries about cross contamination. The demand for surgical gloves will be driven by the growing geriatric population, which is prone to chronic ailments and may require surgery as a result. The market for surgical gloves is expected to rise due to factors such as an increase in the number of surgical procedures performed globally and an increase in the number of occurrences of healthcare-associated infections. Surgical Hand Gloves Market Growth in COVID-19: The surgical gloves market is a vibrant industry with tremendous company development potential, but the present COVID-19 conditions have produced uncertainty in forecasts, alterations in short-term planning goals, and a focus on near-term cost management and long-term complexity management issues. Profit pool growth in the Surgical Gloves market varied greatly in 2020, as firms swiftly aligned their strategies to the existing market conditions mostly succeeded. The COVID-19 pandemic has emerged as the world's most serious threat. This challenge will be worrisome, especially for underdeveloped countries around the world, as it would result in lower imports owing to global trade disruptions. Surgical gloves, on the other hand, had a large surge in demand during the early stages of the COVID-19 crisis, owing to a shift in client purchase habits for personal protective equipment.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of Essential Oil from Lemon Grass

One of the most important essential oils is lemongrass oil. Citral, the oil's most important ingredient, is extracted in large quantities. Citral is the raw ingredient used to make the most significant ion compounds (a series of aromatics with a powerful violet odour). Lemongrass essential oil contains vitamins A, B1, B2, B3, B5, B6, folate, and vitamin C, among others. Magnesium, phosphorus, manganese, copper, potassium, calcium, zinc, and iron are among the minerals found in it. Lemongrass is a grass that belongs to the Poaceae family. Lemongrass is also known as Cymbopogon, a genus of grasses that includes roughly 55 species. The skin-healing effects of lemongrass essential oil are one of its benefits. Lemongrass oil can aid to strengthen hair follicles, reduce hair loss, and soothe itchy and irritated scalps. Lemongrass oil is known to repel bugs like mosquitoes and ants due to its high citral and geraniol content. Lemongrass is one of many essential oils that can help with anxiety. Lemongrass oil has the capacity to treat muscle aches, cramps, and spasms, among other things. It might also aid with circulation. Lemongrass oil's health benefits are becoming more widely known, which is propelling the global industry forward. Individuals' growing preference for alternative remedies is resulting in an increase in the popularity of lemongrass among customers. Furthermore, the growing popularity of aromatherapy and the expanding availability of aromatherapy candles, diffusers, and oils are driving the worldwide lemon grass market forward. In addition, increased demand for lemongrass oil in the pharmaceutical and cosmetic industries is expected to enhance global market growth in the near future.
Plant capacity: Lemon Grass Oil (10 ml Size Pack) 1,334 Ltrs per Day Citral (as by Product) 100,000.0 Ltrs per DayPlant & machinery: 43 Lakhs
Working capital: -T.C.I: Cost of Project: 607 Lakhs
Return: 34.60%Break even: 69.69%
Add to Inquiry Add to Inquiry Basket

Industry of Silicone Sealants (Acetic, Natural, MS & PU Types)

Silicones are a broad category of speciality, high-performance materials that include reactive silanes, silicone fluids, and silicone polymers. They're employed in a wide range of consumer and industrial applications. Silicone sealant is a type of adhesive that comes in a liquid form. It usually has the appearance, feel, and behaviour of a gel. It is chemically distinct from other organic polymer-based adhesives. Sealants are commonly chosen because of their capacity to fill gaps, prevent relative substrate movement, and exclude or enclose another substance. Sealants are commonly chosen because of their capacity to fill gaps, prevent relative substrate movement, and exclude or enclose another substance. They have a lower strength than adhesives, but they are more flexible. Sealants are also used as electrical and thermal insulators, fire barriers, and smoothing, filleting, and faying materials. A sealant serves three primary purposes, regardless of the application: 1. It is used to bridge the gap between two or more substrates. 2. It creates a barrier due to the sealant's physical qualities as well as its adhesion to the substrate. 3. It retains its sealing ability over the projected lifetime, service conditions, and environmental conditions. Silicone sealants are viscous polymers used in a range of industries as sealants. These sealants differ from typical adhesives in terms of elasticity and strength. The emerging nations' expansion of the automotive and transportation sectors, as well as the building and construction sectors, will provide significant growth prospects for the silicone sealants market. For example, infrastructure construction in Asia was valued at USD 1,030.7 billion in 2018 and is expected to grow at an annual rate of 8.9% through 2023, reaching USD 4,622.3 billion. Through 2027, rising construction activity in the region as a result of growing urbanization and industrialization may support silicone sealants market trends.
Plant capacity: Silicone Sealant 300 ml Plastic Cartridges 2,666.7 Packs per day Silicone Sealant 300 ml Aluminium Foil Packages 2,666.7 Packs per dayPlant & machinery: 27 Lakhs
Working capital: -T.C.I: Cost of Project: 283 Lakhs
Return: 30.19%Break even: 75.69%
Add to Inquiry Add to Inquiry Basket

Investment Opportunities in Business of Adhesive (Fevicol Type)

Any non-metallic substance applied to one or both sides of two separate items that binds them together and prevents their separation is known as adhesive, also known as glue, cement, mucilage, or paste. Adhesives have some advantages over conventional binding processes like sewing, mechanical fastenings, and welding. These advantages include the capacity to bind diverse materials together, a more efficient stress distribution across a joint, the cost-effectiveness of a simple mechanised process, and increased design freedom. Adhesives are usually categorised by adhesion mechanism, then reactive or non-reactive, which relates to whether or not the adhesive chemically reacts to harden. Alternatively, they might be classified according to their first physical phase or if the basic material is natural or synthetic. Physical Properties: • High cohesive strength is desirable. • Adhesion to a range of substrates allows bonding of incompatible materials if necessary. • By flexing with peel tension, flexibility promotes peel strength. • The substrate's and adhesives high elastic modulus resists stress at the bond line. • The adhesive's high damping ability distributes dynamic stresses such as vibration, motion, and impact across the bond, as well as peel stresses at the bond line. The Indian adhesives market is predicted to develop at a CAGR of 6%, owing to technological improvements and increased infrastructure. The adhesives market in India will increase as a result of macroeconomic variables such as low per capita consumption and rising disposable income. Paper and packaging, medical and hygiene, as well as consumer and construction, will all enjoy growth in the worldwide adhesives and sealants market from 2019 to 2021. Few Indian Major Players 1. D H Resins & Chemicals Pvt. Ltd. 2. D I C India Ltd. 3. F C L Technologies & Products Ltd. 4. Feroke Boards Ltd. 5. Golden Chem-Tech Ltd. 6. Henkel Adhesives Technologies India Pvt. Ltd. 7. Konar Organics Ltd. 8. Leela Packagings Ltd.
Plant capacity: Adhesive (Fevicol Type) 10.0 MT per DayPlant & machinery: 17 Lakhs
Working capital: -T.C.I: Cost of Project: 161 Lakhs
Return: 26.70%Break even: 65.62%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 196 of 254 | Total 2532 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 196 253 254   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top