REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

 THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 178 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 178 253 254   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Rewinding of Burnt Electric Motors

Electric motors are relatively simple mechanical devices, given the sheer number of different motors and winding patterns, the rewinding process can vary greatly. However, it generally involves cutting the original windings out of the motor’s stator or armature and replacing them with new coils made from wire of the same basic type and gauge. The electrical motors are electro-mechanical device that converts electrical energy to mechanical energy and they are used in wide variety of industrial and domestic equipment’s to provide motive power. The motors uses either Alternating current or Direct Current and have several types of winding designs to get different operating speed (rpm) and load conditions or motive power ratings normally (HP or KW). Most common motors are Induction winding coil design as it offers many advantages. The motors are either operated on single phase type or 3-phase depending on duty and according winding coils are designed. Market size value of electric motor sales in 2020 is USD 145.8 billion. Revenue forecast of electric motor sales in 2027 USD 252.5 billion. Growth Rate CAGR of 8.2% from 2020 to 2027 increasing demand for them in various industries including chemicals, paper & pulp, cement, and wastewater treatment is likely to further contribute to the growth of the segment. Growing sales of electric vehicles and subsequent scope of the machine type in the same are also expected to spur the growth of the segment over the forecast period. The rise in demand for superior machine control in automotive industry, owing to the high efficiency of AC synchronous motors fuels the electric motor market growth. The regulations such as Minimum Energy Performance Standards (MEPS), drives the growth of energy efficient electric motors market across the world. The material handling systems serve as the key consumers of fractional horsepower (FHP) motors, thus boosting their demand across the globe. Moreover, the adoption of motors ranging 21-60 V in HVAC sectors, owing to the heat dissipation, are anticipated to exhibit high demand for these motors in the coming years. Growth opportunities for the market in Latin America and the Middle East & Africa are projected to rise soon owing to increasing government funding. Rising demand from the oil and gas industry, rapid development in the mining industry, and significant demand for cement across the construction industry are benefitting the market in these regions. Entrepreneurs who invest in this project will be successful.
Plant capacity: Rewinding Brunt Electric Motors : 10 Nos./ DayPlant & machinery: Rs 885 lakhs
Working capital: -T.C.I: Cost of Project : Rs 1320 lakhs
Return: 27.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Aluminium Extruded Bar from Aluminium EN AW 6063

Aluminium is a versatile material integral to modern life. The metal is found in everything from soda cans to cell phones to window frames to airplanes. The aluminium industry can be categorized into two principal segments. The key segment is the production of primary aluminium by integrated producers engaged in the entire value chain from the mining of bauxite in an alumina refinery, and conversion of alumina into primary aluminium metal in an aluminium smelter. Primary aluminium is made commercially available in the form of ingots, billets, wire rods or properzi rods also called conductor redraw rods. The second principal segment consists of secondary/downstream producers who are engaged in the manufacture of value-added semi fabricated aluminium products such as rolled products, extrusions and foils. India is considered to be the fifth largest producer of aluminium in the world with a tremendous bauxite reserve of about 3 billion tonnes. While the major consumption of aluminium in India is done by the electrical (31%) and B&C sectors (13%), the future growth is envisaged to happen in the solar power and industrial sector. The global aluminum extrusion market reached a volume of 20.3 Million Metric Tons in 2019. The global aluminum extrusion market size is anticipated to reach USD 113.5 billion by 2025, progressing at a CAGR of 5.3% over the forecast period. Aluminum extrusion is the process of melting and transforming an aluminum alloy bar into a specific shape by pushing it through a cross-sectional die. Extruded aluminum has a high electrical and thermal conductivity, ductility and recyclability and can be customized according to the requirements of the consumer. The extruded parts also have a smooth and fine surface finish and can be polished, buffed, anodized, painted or powder-coated to enhance the aesthetic value and appeal of the product. Aluminum extrudes are cost-efficient, lightweight and corrosion-resistant, require low maintenance and have paramagnetic properties that make them a highly preferred alternative to conventional aluminum products. They find extensive application across various industries such as building and construction, transportation, machinery and equipment, consumer durables, electrical, etc. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Alufit (India) Pvt. Ltd. Aluminium Profiles Ltd C R P (India) Pvt. Ltd. Concentris Metal Strategies (India) Pvt. Ltd. E V A Alu Panel Ltd. Jindal Aluminium & Steel Ltd. Jindal Aluminium Ltd. Jayakrishna Aluminium Ltd. Kalzip India Pvt. Ltd.
Plant capacity: Aluminium Extruded Bar: 10 MT / DayPlant & machinery: Rs 183 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1422 lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Maize Starch

Maize also known as corn is a cereal grain. Maize has become a staple food in many parts of the world, with total production surpassing that of wheat or rice. However, not all of this maize is consumed directly by humans. Some of the maize production is used for corn ethanol, animal feed and other maize products, such as corn starch and corn syrup. The six major types of corn are dent corn, flint corn, pod corn, popcorn, flour corn, and sweet corn. Maize is grown in Uttar Pradesh, Bihar, Rajasthan, Punjab, Madhya Pradesh, Himachal Pradesh, Gujarat, Jammu and Kashmir, Andhra Pradesh, Mysore, and Haryana. Starch is a group of polysaccharides, composed of glucopyranose units joined together by-glucosidric linkages. It conforms to the molecular formula, (C6-H10O5)n, where n varies from a few hundred to over one million. Starch is found as the reserve carbohydrate in various parts of plants and is enzymatic ally broken down to glucose to other carbohydrates according to the metabolic needs of the plants. Maize Starch exhibits all the properties of native starch with some special features such as non-foaming & non-thinning characteristics of boiling solution. Hence, maize starch has a marginal effect on the efficiency in weaving and paper industry. Where high viscosity starch is used, it imparts higher tensile strength to the fibre and thus improves the sizing. Maize starch has various direct and indirect uses in many industries. Maize starch has a low ash and protein. Our maize starch is extracted from Hybrid corn varieties, which are available near, by our plant. Maize starch is used in food, paper, Pharma and Textile industries. This is mainly because the area under kharif maize (2016-17) saw a jump to 84.26 lakh ha. There is a bearish trend in the global maize market due to over production in key maize growing countries led by US. Given the global scenario which hints a surplus production this year and assuming the normal kharif maize area, the Agricultural Market Intelligence Centre projected the prices of maize at kharif harvest period of 2017-18. India corn starch market is estimated to be valued at 1.37 Billion in 2018 and is estimated to grow at a CAGR of 3.9% during the forecast period 2019–2024. Corn Starch production in India is very fragmented since there are a large variety of producers or manufacturers with different production capacities. The main raw material for the same is maize but to a small extent, some other materials and used and they include rice, potato and tapioca. The key products or derivatives which are hence obtained include modified starches, syrups, sweeteners, corn germ and others. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Aksharchem (India) Ltd. Devi Corn Products Ltd. Kasyap Sweetners Ltd. Sahyadri Starch & Inds. Pvt. Ltd. Roquette India Pvt. Ltd. Spac Starch Products (India) Ltd. Sukhjit Starch & Chemicals Ltd. Tirupati Starch & Chemicals Ltd. Wockhardt Health Care Ltd.
Plant capacity: Maize Starch: 31 MT / Day Germ Bye Product: 5 MT / Day Gluten Bye Product: 3 MT / Day Husk/Bran Bye Product: 8 MT / Day Steep Liquor Bye Product: 2 MT / DayPlant & machinery: Rs 1124 lakhs
Working capital: -T.C.I: Cost of Project : Rs 2349 lakhs
Return: 21.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Plastic Waste Recycling Plant

Waste is now a global problem, and one that must be addressed in order to solve the world's resource and energy challenges. Plastics are made from limited resources such as petroleum, and huge advances are being made in the development of technologies to recycle plastic waste among other resources. Mechanical recycling methods to make plastic products and feedstock recycling methods that use plastic as a raw material in the chemical industry have been widely adopted, and awareness has also grown recently of the importance of Thermal recycling as a means of using plastics as an energy source to conserve petroleum resources. Plastic, in many applications, can do a better job at a lower cost than other materials. Each plastic should be selected on the basis of its properties. Thus, each plastic is not an answer to all problems. Here in this project report we have considered Ten Plastic materials, out of that major four plastic materials have LDPE, HDPE, PP, Pet bottles and Derlin. Industrial applications like various components for Textiles, Transport Containers, Storage Containers, Bottle crates, Galvanized components for Automobiles and plumbing, woven sacks for packing a variety of products like fertilizers, powdered chemicals, pesticides, etc. sheet lining of Tanks/Vessels for chemicals. Plastic recycling refers to a process that is performed either mechanically or chemically to recover plastic waste from discarded items for production of reusable plastic. The global plastic recycling market has been gaining a steady momentum over the past few years due to the growing awareness about carbon emissions and the need to reduce them. Citing this reason, the report states that the global plastic recycling market, which was valued at US$31.5 bn in 2015 is expected to reach a figure of US$56.8 Bn by 2024. During the forecast period of 2016 and 2024, the global market is expected to progress at a CAGR of 6.9%. The market is witnessing growth due to a growing preference for recycled plastics over virgin plastics as a result of severe pollution caused by the disposal of used plastics in oceans and the scarcity of landfill areas in many countries. Factors such as increasing use of recycled plastics in many new applications in the packaging, automotive and the electrical & electronics industry and many favorable initiatives promoting the use of recycled plastics worldwide offer lucrative opportunities for the growth of the recycled plastics market. Higher cost of recycled plastics. Stringent competition with virgin plastics in terms of performance is a major factor restraining the growth of the market. The ban on import of certain waste plastic scraps to China and irregular collection of the waste plastics for its reprocessing are some of the factors challenging the growth of the global recycled plastics market globally. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Garden Polymers Pvt. Ltd. Himalayan Packaging Inds. Pvt. Ltd. Kkalpana Industries (India) Ltd. South Asian Petrochem Ltd. Renaissance Corporation Ltd. Jain Plastics & Chemicals Ltd
Plant capacity: Recycled PP Granules: 578 Kgs / Day Recycled LDPE Granules : 720 Kgs / Day Recycled HDPE Granules: 727 Kgs / Day Recycled Delrin Granules: 475 Kgs / Day Recycled PET Granules: 2,500 Kgs / DayPlant & machinery: Rs 144 lakhs
Working capital: -T.C.I: Cost of Project : Rs 380 lakhs
Return: 26.00%Break even: 68.00%
Add to Inquiry Add to Inquiry Basket

Herbal Toothpaste

Toothpaste is a paste or gel to be used with a toothbrush to maintain and improve oral health and aesthetics. Since their introduction several thousand years ago, toothpaste formulations have evolved considerably - from suspensions of crushed egg shells or ashes to complex formulations with often more than 20 ingredients. Among these can be compounds to combat dental caries, gum disease, malodor, calculus, erosion and dentin hypersensitivity. Global Herbal Toothpaste Market 2020 is on track to obtain a growth rate of 5.22% between 2019 and 2024. The global herbal toothpaste market has been segmented based on pack size, distribution channel, and region. The global market has been classified, based on pack size, as 25gm, 50 gm, 100gm, and others. The global market has been segmented, based on distribution channel, store-based, and non-store-based. The store-based segment has been further bifurcated into supermarkets & hypermarkets, convenience stores, and others. However, the herbal toothpaste market may benefit from the tariff wars imminent as a result of the Covid-19 crisis, as countries may aim to reduce imports of chemical-based toothpastes that China has taken a lead in, thereby boosting the herbal toothpaste market. The growing intake of tobacco and its rising negative impact on the oral health has driven the sale of easy to go and convenient oral care herbal products worldwide. Renowned firms in the market are taking up several initiatives to promote the sales of herbal toothpastes by spreading awareness about the benefits of these products. They are trying to convince consumers about the high effectiveness of herbal toothpastes in maintaining oral health and dental hygiene. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Colgate-Palmolive (India) Ltd. Dabur India Ltd. Herbalife International India Pvt. Ltd. Organic India Pvt. Ltd. Vicco Products (Bombay) Pvt. Ltd. Patanjali Ayurved Ltd.
Plant capacity: Herbal Toothpaste 30 gms Size Tubes: 32,000 Tubes / Day Herbal Toothpaste 80 gms Size Tubes: 12,000 Tubes / DayPlant & machinery: Rs 83 lakhs
Working capital: -T.C.I: Cost of Project : Rs 812 lakhs
Return: 34.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

Herbal Health Drink

A drink (or beverage) is a liquid intended for human consumption. In addition to their basic function of satisfying thirst, drinks play important roles in human culture. Common types of drinks include plain drinking water, milk, etc. The Herbal Health Drink is a blend of juices extracted from freshly procured with quality herbs. The Drink is waterless, preservative less, without the use of artificial flavors. The combined goodness of the ingredients helps in keeping the energy levels high apart from helping in unblocking heart arteries, controlling high blood pressure, bad cholesterol, arthritis, cough & cold, constipation. Apple Cider Vinegar may help to restore the low acidic levels in stomach, thus improving digestion. It also helps in reducing acidity and bloating. The soft drinks industry, which is launching energy drinks, has to address the issues and concerns raised by WHO and other agencies. Otherwise the industry might face many challenges and hurdles. With huge investments coming from cola giants in the coming years, the Indian energy drinks market can witness launch of natural healthy nutrition drinks in the coming years. Global Herbal Tea Market is expected to register a CAGR of 4.94% to reach USD 4,226.9 Million by 2025. Herbal teas or tisanes are caffeine-free and do not use the leaves of the Camellia silences plant. Tisanes are made using a mixture of dried leaves, seeds, grasses, nuts, barks, fruits, flowers, or other botanical elements that provide taste and various health benefits. The global herbal tea market has been largely benefited by the high demand for functional beverages and the launch of new and innovative flavors. Several tea producers are entering the food & beverage industry, which is contributing to the growth of the herbal tea market across the globe. Furthermore, the market players are expected to witness growth opportunities due to the rising demand for organic products due to health concerns caused by chemical additives present in conventional products. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Aayush Food & Herbs Ltd. Apeejay Tea Ltd. Dabur India Ltd. Danone (India) Pvt. Ltd. Dumex Ltd. Herbalife International India Pvt. Ltd. Organic India Pvt. Ltd. Patanjali Ayurved Ltd.
Plant capacity: Herbal Health Drink 200 ml Size Bottle : 30,000 Bottles / Day Herbal Health Drink 500 ml Size Bottle : 12,000 Bottles / DayPlant & machinery: Rs 27 lakhs
Working capital: -T.C.I: Cost of Project: Rs 328 lakhs
Return: 28.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Plastic Pyrolysis (Waste Plastic to Oil Conversion)

During pyrolysis, plastic polymers are thermally degraded by heating them in the absence of oxygen. The main products of the pyrolysis process are liquid and gaseous, producing only a small amount of solid. The pyrolysis process is one of the most promising technologies in the conversion of waste plastics into high quality oil. The quantity and quality of the pyrolysis products depend on the waste plastics composition and the process parameters (temperature, residence time, catalyst, etc.) Waste plastic pyrolysis in liquid fuel (gasoline, diesel oil, etc.) or chemical raw materials not only can effectively solve the problem of white pollution, but also can alleviate the energy shortage to a certain extent. Recycling of waste plastics is expected to become the most effective way. Waste plastics’ recycling, regenerating, and utilizing have become a hot spot of research and gradually formed a new industry. Plastic has created a worldwide epidemic of increased waste disposal issues in key economies and developing countries. Thus, the implementation of stringent regulations has compelled market players in the recycled plastic and plastic waste to oil market to devise environmental-friendly strategies to convert plastic waste into useful fuel. The global plastic waste to oil market is expected to increase from ~US$ 45 Mn in 2019 to ~US$ 100 Mn by 2027. Plastic waste to oil can be defined as a technology that is used to convert non-recycled plastic into synthetic crude oil and other value-added petroleum products such as diesel, gasoline, naphtha, and fuel oil. This is an advanced waste conversion technology that is considered complementary to the existing plastic recycling technology. Plastic waste to oil technology has high potential, as landfill-bound plastics can be used as a resource to develop a valuable alternative fuel source. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Chevron Phillips Chemicals India Pvt. Ltd. Dream Green Petro-Chem Pvt. Ltd. M K Aromatics Ltd.
Plant capacity: Pyrolysis Oil: 5 MT / Day Carbon (by product): 1.67 MT / Day Gas (by product): 1 MT / DayPlant & machinery: Rs 92 lakhs
Working capital: -T.C.I: Cost of Project : Rs 312 lakhs
Return: 27.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Carbon Fibre

Carbon fibers are usually combined with other materials to form a composite. When combined with a plastic resin and wound or molded it forms carbon fiber reinforced polymer (often referred to as carbon fiber) which has a very high strength-to-weight ratio, and is extremely rigid although somewhat brittle. However, carbon fibers are also composited with other materials, such as with graphite to form carbon-carbon composites, which have a very high heat tolerance. Carbon fibers are, by far, the most widely used fiber in high-performance applications. This important technology has huge potential for the future and it is expected to have a significant impact in the manufacturing industry within India and, therefore, coordination and strategic road mapping actions are required. Composites have been widely used across industries like aerospace, wind energy, automotive, industrial, marine, oil and gas. Advanced carbon fiber composites are comparatively more expensive than metals. The choice of composites is tradeoff between cost and performance. As a result, carbon composites have made their impact in high performance vehicles, such as, jet fighters, space craft, racing cars, racing yachts and exotic sports cars. The values of global carbon fibre sales in these areas ($2.034 billion) do not, however, correspond to the volumes of carbon fibre used in the various application areas. The report adds that aerospace and defiance, for example, uses only 18% of the total quantity of carbon fibre but accounts for around 40% of the value of global sales. This sector consumed 15,000 tonnes of carbon fibres in 2012 and could reach 23,000 tonnes in 2016 and 37,000 tonnes in 2020. These figures are however less optimistic that those that were forecast by the specialists in previous years. Indeed, even if the pressure to use renewable energies is high and if legislation is increasingly restrictive, the policies of the public authorities in terms of subsidies and development strategies (offshore wind farms, etc.) can have a decisive influence on the market for composites. The carbon fiber market is projected to grow from USD 4.7 billion in 2019 to USD 13.3 billion by 2029, at a CAGR of 11.0% between 2019 and 2029. The market is growing due to its increasing demand from aerospace & defense, automotive, and wind energy industries. Entrepreneurs who invest in this project will be successful.
Plant capacity: Carbon Fibre: 1,000 Kgs / DayPlant & machinery: Rs 194 lakhs
Working capital: -T.C.I: Cost of Project : Rs 623 lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Toothpaste

Toothpaste is a paste or gel to be used with a toothbrush to maintain and improve oral health and aesthetics. Since their introduction several thousand years ago, toothpaste formulations have evolved considerably - from suspensions of crushed egg shells or ashes to complex formulations with often more than 20 ingredients. Among these can be compounds to combat dental caries, gum disease, malodor, calculus, erosion and dentin hypersensitivity. Furthermore, toothpastes contain abrasives to clean and whiten teeth, flavors for the purpose of breathe freshening and dyes for better visual appeal. Effective toothpastes are those that are formulated for maximum bioavailability of their actives. This, however, can be challenging as compromises will have to be made when several different actives are formulated in one phase. Toothpaste development is by no means complete as many challenges and especially the poor oral substantively of most active ingredients are yet to overcome. The global toothpaste market is projected to grow at a CAGR of 6.1% during the forecast period. The toothpaste market was valued at USD 26.09 billion in 2018, and it is projected to reach USD 36.98 billion by 2024. Increasing dental problems among children and adults, due to poor eating habits, and the rise in popularity for herbal oral care products are the factors primarily driving the global toothpaste market. Moreover, rising premiumization and consumers seeking more targeted solutions are accelerating the growth of the market studied. The rise in consciousness of oral health has helped vendors introduce oral hygiene product categories, such as teeth-whitening products. One of the popular products used for teeth whitening is whitening toothpaste. Manufacturers offer toothpaste with teeth-whitening functionality that differs from ordinary toothpaste. To improve market position, manufacturers are constantly focusing on implementing innovative strategies and introducing a broad portfolio of products. Entrepreneurs who invest in this project will be successful.
Plant capacity: White Toothpaste 50 gms Size: 96,000 Tubes / Day White Toothpaste 240 gms Size: 16,800 Tubes / Day Striped Toothpaste 180 gms Size: 33,600 Tubes / Day Gel Toothpaste 120 gms Size: 67,200 Tubes / DayPlant & machinery: Rs 308 lakhs
Working capital: -T.C.I: Cost of Project : Rs 6936 lakhs
Return: 36.00%Break even: 34.00%
Add to Inquiry Add to Inquiry Basket

Oxygen Gas Plant (Medical Grade)

Oxygen gas comprises 21 percent of atmospheric gas. Its symbol is O2. Atomic weight of oxygen is 16, atomic no. is 8 and molecular weight is 32. Oxygen gas is non metallic element. Oxygen is colorless, odorless and tasteless. Oxygen reacts with all elements, but not with inert gases to form compound called oxides. Medical oxygen is high purity oxygen that is used for medical treatments and is developed for use in the human body. Medical oxygen cylinders contain a high purity of oxygen gas; no other types of gases are allowed in the cylinder to prevent contamination. Medical oxygen is important in the healthcare industry because of its several uses. Some of the major uses & application of medical grade O2 are mentioned below. Commonly medical oxygen is administered in medical facilities like hospitals and clinics. It’s used during anesthesia, first aid resuscitation for emergencies, life support for patients who can’t breathe on their own, and oxygen therapy. Medical Oxygen Gas Cylinders Market is valued at USD 8.30 Billion in 2018 and expected to reach USD 14.41 Billion by 2025 with the CAGR of 6.2% over the forecast period. Rising prevalence of chronic diseases and infectious like Covid-19, cancer, asthma, diabetes, heart attack etc. and surge in global geriatric population are some important factors driving the growth of medical oxygen gas cylinders market. Oxygen cylinders are needed for the rising demand of hospitals, home care settings and many others. Medical oxygen gas cylinders are present in different sizes depending upon the requirement. In hospitals, oxygen gas therapy is implemented on the patients for the treatment of chronic health conditions to improve energy levels, sleep and a better quality life of patients. Oxygen is widely used in hospitals for the treatment of a number of acute and chronic diseases. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Bellary Oxygen Co. Pvt. Ltd. Bhilai Oxygen Ltd. Govind Poy Oxygen Ltd. Howrah Gases Ltd. Linde India Ltd. Praxair India Pvt. Ltd.
Plant capacity: Medical Grade Oxygen Gas 28.5 Kgs : 180 Cylinders / DayPlant & machinery: Rs 284 lakhs
Working capital: -T.C.I: Cost of Project : Rs 596 lakhs
Return: 23.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 178 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 178 253 254   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top