Google Search

Search

Already a Member ?

Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 82 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 82 253 254   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

High Tensile Nuts & Bolts (For Automobile Industry)

A fastener is a connective mechanism that mechanically joins or affixes two ormore objects together. A bolt is an externally threaded fastener designed for insertion through holes in assembled parts, and is normally intended to be tightened or released by torqueing a nut.A nut is a type of hardware fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together.Nuts and Bolts are most commonly used items in the family of industrial fasteners and their demand is fast increasing due to expansion of industries in the country. Bolt is a piece of metal rod whose one end is upset and at the other end threading is done. Nut is device, which rolls on these threads. The fasteners market is projected to grow from USD 5.49 Billion in 2016 to USD 7.73 Billion by 2021, at a CAGR of 7.08%. Increasing number of automobile industries and continuous demand, technologically advanced fasteners are some of the key factors expected to drive the global automobile fasteners market.The overall fasteners market is estimated at about Rs. 28 bn. While the organised sector (HT fasteners) has a share of 65%, the balance of 35% is shared by unorganised sector and imports.Thus, due to demand it is best to invest in this project. Few Indian major players are as under • A V R Fasteners Pvt. Ltd. • Adinath Forging Pvt. Ltd. • Agarwal Bolts Ltd. • Agarwal Fasteners Pvt. Ltd. • Deepak Fasteners Ltd. • Dev Fasteners Ltd.
Plant capacity: Mild Steel/HT Bolts (DR M8-M16): 20 MT/Day Mild Steel/HT Nuts (DR M18-M30): 6 MT/DayPlant & machinery: Rs. 378 lakhs
Working capital: -T.C.I: Cost of Project: Rs.744 lakhs
Return: 26.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Super Speciality Hospital

This pre-feasibility report on Speciality/ Multi-speciality hospital consists of the feasibility detailing for three models of hospitals namely 30 beded Super speciality hospital.The Indian healthcare industry is divided into two segments - services and manufacturing. While the manufacturing segment consists of medical equipment manufacturing industry and pharma production, the services segment is basically split into direct services and indirect services. Hospitals, health insurance services and R&D services are considered as direct services, while third party insurance, claims settlement services and others, constitute the indirect services. The healthcare equipment sector attracted 8.8 per cent of the total investments in terms of deal value with an aggregate of US$ 249.01 million (20 deals), according to data released by VCCEdge. The hospital and diagnostics center in India received foreign direct investment (FDI) worth US$ 1,597.33 million, while drugs & pharmaceutical and medical & surgical appliances industry registered FDI worth US$ 10,318.17 million and US$ 622.99 million. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Adani Hospitals Mundra Pvt. Ltd. • Ahalia Healthcare Ltd. • Alchemist Hospitals Ltd. • Apollo Hospitals Enterprise Ltd. • B P Poddar Hospital & Medical Research Pvt. Ltd. • B S R Super Speciality Hospitals Ltd.
Plant capacity: Super Speciality Hospital: 30 beddedPlant & machinery: Rs. 113 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 978 lakhs
Return: 28.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Dehydrated Onion

Dehydration process appears to be a variation on the air-drying process and is based on the principle of vapor pressure differentials, using air circulated around the onions at relatively low temperatures to `sweat' the water from the food.Onion dehydration involves the use of a continuous operation, belt conveyor using fairly low temperature hot air from 38 - 104°C. The main advantages of dehydrated onions are that they are easy to store, being lighter in weight and smaller in bulk than fresh or other processed onions. Dehydrated onion products demand has sharply increased in India after prices of onion gained in domestic markets. According to dehydrated onion players, demand has almost doubled in past three months mainly for onion powder. The industry expects about 20,000 tonne consumption. India produces about 70,000-75,000 tonne of dehydrated onion every year. Out of it, nearly 15% is consumed within the country while the rest 85% is exported to Russia, Europe, Middle East and Africa, among others.The global market for dehydrated onions registered the revenue worth US$ 950 Mn in 2017, which is likely to reach in excess of US$ 1,500 Mn by the end of 2028.Future Market Insights expects the dehydrated onions market to observe stable growth at a promising CAGR of 4.8% over the 10-year assessment period, 2018-2028.Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Darshan Foods Pvt. Ltd. • Garlico Industries Ltd. • Kasaar Innovative Foods Ltd. • L M P Gujarat Agro Exports Ltd. • Meghmani Organics Ltd. • Orient Vegetexpo Ltd.
Plant capacity: Dehydrated Onion Sliced/Chopped: 300 MT/Annum Cattle Feed as by product: 210 MT/AnnumPlant & machinery: Rs. 69 lakhs
Working capital: -T.C.I: Cost of Project: Rs199 lakhs
Return: 27.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Thinners and Solvent Thinners(Blending and Bottling)

A thinner is a solvent used to thin oil-based paints or clean up after their use. Commercially, solvents labeled "Paint Thinner" are usually mineral spirit shaving a flash point at about 40°C (104°F).Solvent is a chemical, which liquefies in a chemically diverse solute to make a solution. Solvent can be in liquid form but is also available in gaseous and solid form. Used in Printing inks, paints, and coatings, pharmaceuticals, adhesives & cosmetics etc. Moderate growth is estimated for India solvents market during the forecast period 2016 to 2024, according to a report by Persistence Market Research (PMR). In terms of volume, sales of solvents in India reached 2,019,743.5 tons in 2016; by 2024 this number is expected to reach nearly 3,000,000 tons, expanding at 4.7% CAGR.India solvents market are projected to register highest CAGR through 2024.Which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Asian Paints P P G Pvt. Ltd. • Faaber Paints Pvt. Ltd. • Mysore Paints & Varnish Ltd. • Noroo Bee Chemical India Pvt. Ltd.
Plant capacity: Thinner (1 Ltrs Size): 4000 Bottles/Day Solvent Thinner (1 Ltrs Size): 4000 Bottles/DayPlant & machinery: Rs 198 lakhs
Working capital: -T.C.I: Cost of Project: Rs395 lakhs
Return: 25.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

M S Billets

Billets A semi-finished product obtained by forging, rolling or continuously casting, usually square (not exceeding 125 mm×125 mm in cross-section) with rounded corners or round (not exceeding 125 mm in diameter) and are intended for further processing into suitable finished product by forging or rerolling. Mild steel billets are used for mechanical engineering works such as manufacturing machines and their parts. Steel billets are used for production of plate, sheets, strips, rod etc. India is the ninth largest producer of crude steel in the world production of 33 million MT and investment of over Rs1,000 billion.Global steel demand will reach 1,616.1 MT in 2018, an increase of 1.8% over 2017 figures. In 2019, it is forecast that global steel demand will grow by 0.7% to reach 1,626.7 Mt.As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • GallanttIspat Ltd. • Ganga Iron & Steel Trading Co. Ltd. • Hi-Tech Power & Steel Ltd. • Jai BalajiInds. Ltd. • Kamachi Industries Ltd. • Rohit Iron & Steel (India) Pvt. Ltd.
Plant capacity: M.S. Billets (Size 80x80 mm to 140x140 mm): 180 MT/DayPlant & machinery: Rs. 1565 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 3343 lakhs
Return: 28.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Solar Power Plant

Solar power is one of the most promising renewables. It is reliable and less vulnerable to changes in seasonal weather patterns. Hydrogen, in the capacity of energy vector, is expected to be the optimum solution for intermittency and storage of energy produced by renewables.The basic work of Solar Power plant is to generate electricity from Solar Panels. Solar Panels generate DC (Direct Current) electricity from sunlight, Solar Inverter convert this power to AC (Alternative Current) and run your electrical home appliances and machines. The total installed capacity of solar power plants in India stands at 13.11 GW as of June 2017.The Indian government significantly expanded its solar plans, targeting US$100 billion of investment and 100 GW of solar capacity by 2022.The installed grid connected solar power capacity is 4,060.65 MW, and India expects to install an additional 10,000 MW by 2017 and a total of 100,000 MW by 2022.Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Bhagyanagar India Ltd. • C P E C Ltd. • Central Electronics Ltd. • Environ Energy-Tech Services Ltd. • Epic Energy Ltd. • Gujarat Mineral Devp. Corpn. Ltd.
Plant capacity: Solar Power: 1 MWPlant & machinery: Rs. 411 lakhs
Working capital: -T.C.I: Cost of Project: Rs.811 lakhs
Return: 1.00%Break even: 1.00%
Add to Inquiry Add to Inquiry Basket

Solar Panel

A solar panel is a collection of solar cells.Solar panel refers either to a photovoltaic module, a solar thermal energy panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications.A single solar module can produce only a limited amount of power most installations contain multiple modules. A photovoltaic system typically includes a panel or an array of solar modules, an inverter, and sometimes a battery and/or solar tracker and interconnection wiring. India is poised for a big take off in the installation of solar energy. The JNNSM target of 20 GW of installation by 2022 and also proactive policies from states like Gujarat are the key drivers for the growth of the solar sector in India.As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Alectrona Energy Pvt. Ltd. • Bright Solar Ltd. • Emmvee Photovoltaic Power Pvt. Ltd. • Gautam Solar Pvt. Ltd. • H H V Solar Technologies Ltd. • Helios Photo Voltaic Ltd.
Plant capacity: Solar Panel: 25 MWPlant & machinery: Rs. 161 lakhs
Working capital: -T.C.I: Rs.804 lakhs
Return: 54.00%Break even: 28.00%
Add to Inquiry Add to Inquiry Basket

Cold Storage

A cold storage is a temperature-controlled supply chain network, with storage and distribution activities carried out in a manner such that the temperature of a product is maintained in a specified range, needed to keep it fresh and edible for a much longer period than in normal ambient conditions. This system facilitates long distance transport of various products as well as makes seasonal products available over the entire year.Cold Storage is a special kind of room, the temperature of, which is kept very low with the help of machines and precision instruments. Chilling involves reducing food temperatures to below ambient temperatures, but above –1°C. Indian cold storage market is expected to grow at a CAGR of 16.09% by 2020 driven by the growth in the organized retail, Indian fast food market, and food processing industry. The cold storage market in India is highly fragmented with more than 3500 players in the unorganized sector and around 30 players in the organized sector. India currently has 6156 cold storage facilities across various states with total capacity of 28.68 MMT. Entrepreneurs who invest in this project will be successful.
Plant capacity: Cold Storage (Fruits, Vegetables, Pulses & Spices Store): 5000 MT Plant & machinery: Rs. 120 lakhs
Working capital: -T.C.I: Cost of Project: Rs665 lakhs
Return: 18.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Red Oxide Primer From Mill Scale

Red oxide primer is a specially formulated coating used as a base coat for ferrous metals. Red-oxide primer serves a similar purpose to interior wall primers in that it prepares metal for a topcoat, but it also gives iron and steel surfaces a layer of protection. A primer is composed of Red Oxide, solvents, resins, and various additives. The pigments give the primer color; solvents make it easier to apply; resins help it dry; and additives serve as everything from fillers to anti fungicidal agents. The Indian paint market will grow with a CAGR of around 14% during 2015-16 to 2019-20.The Indian paint industry has been growing at an average 15% per annum over the last decade. Growth has been consistent with the Indian GDP growth rate and in some years the industry has grown at a rate of 1.5 to 2 times higher than that of GDP growth. Construction remains the key growth sector and is driving demand for decorative and protective coatings.As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under • Ashok Neel Mfrs. Pvt. Ltd. • Bajaj Superpack India Ltd. • Eskay Dye-Stuffs & Organic Chemicals Pvt. Ltd. • Futura Polyesters Ltd. • NirupSynchrome Ltd. • Omkar Industries Ltd.
Plant capacity: Red Oxide Primer (Each Packed in 20 Ltrs Container) : 1000 Packs/Day Red Oxide Primer (Each Packed in 5 Ltrs Container) : 4000 Packs/DayPlant & machinery: Rs. 292 lakhs
Working capital: -T.C.I: Cost of Project: Rs. 1016 lakhs
Return: 28.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Jute Shopping Bags

Jute fabrics are strong, durable, light, color fast, attractive and cheaper than most fabrics made from other fibers.There is very simple sewing machine and cutting machine required for making jute bags. There is very good demand of jute bags. Demand of jute bag is meet up by our own growth. Jute bags has very good export potentiality. Raw materials required for making jute bags are cotton threads and jute fiber cloth. It can be packed in the plain box and transport it. The global jute bag market reached a value of US$ 1.4 Billion in 2016, exhibiting a CAGR of around 11% during 2009-2016. The market is projected to reach a value of US$ 2.6 Billion by 2022.Indian jute carry and shopping bags exporters are shipping over millions of bags every year & trends show that the numbers are likely to keep rising rapidly. Sara International, one of the top jute bags manufacturers, which is taking advantage of this trend.As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under • Agarpara Jute Mills Ltd. • Ambica Jute Mills Ltd. • Bally Jute Co. Ltd. • Calcutta Jute Mfg. Co. Ltd. • Caledonian Jute &Inds. Ltd. • Empire Jute Co. Ltd.
Plant capacity: Jute Shopping Bags: 2400Nos/DayPlant & machinery: Rs. 4 lakhs
Working capital: -T.C.I: Cost of Project : Rs. 22 lakhs
Return: 32.00%Break even: 82.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 82 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 82 253 254   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top