REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

 THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 47 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 47 253 254   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Many companies manufacture packaged intravenous fluids, as well as products which can be mixed with sterile water to prepare a solution for intravenous administration. Fluids are given when someone's body fluid volume falls. There are a number of things which can cause a drop in fluid volume. Vomiting and diarrhea are a classic example, which is why people are encouraged to drink fluids when they are sick, to keep their fluid volume stable. Another cause is blood loss, which causes problems both because people lose blood products, and because they experience a loss in fluid volume. Electrolyte levels in the blood can also become unstable as a result of rapid changes in fluid volume, in which case intravenous fluids can be used to restore the balance. India has the world's third largest active pharmaceutical ingredients (API) for the industry valued at a little less than USD 2 bn. Top 5 API producers account for approximately 6.5 %. The leading APIs are anti-infectives, gastrointestinal, cardiovascular and respiratory drugs. The Chemical Pharmaceutical Generic Association (CPA) projects that India's share of the world API market will grow by 10.5% by 2010 as patented blockbuster drugs lose their patent protection. The CPA also expects that the domestic Indian market for APIs, both generic and branded, will rise from USD 755 mn in 2005 to USD 1.9 bn in 2010.
Plant capacity: 48,000 Bottles/Day 500 ml each bottlePlant & machinery: 253 Lakhs
Working capital: N/AT.C.I: Cost of Project: 834 Lakhs
Return: 29.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Production of I.V. Fluids (Saline and Dextrose). Intravenous Solution (IV) Manufacturing Business with Blow-Fill-Seal (BFS) Technology.

Fluids are given when someone's body fluid volume falls. There are a number of things which can cause a drop in fluid volume. Vomiting and diarrhea are a classic example, which is why people are encouraged to drink fluids when they are sick, to keep their fluid volume stable. Another cause is blood loss, which causes problems both because people lose blood products, and because they experience a loss in fluid volume. Electrolyte levels in the blood can also become unstable as a result of rapid changes in fluid volume, in which case intravenous fluids can be used to restore the balance. Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Many companies manufacture packaged intravenous fluids, as well as products which can be mixed with sterile water to prepare a solution for intravenous administration. Intravenous fluids can be broken into two broad groups. Crystalloids such as saline solutions contain a solution of molecules which can dissolve in water. When crystalloids are administered, they tend to create low osmotic pressure, allowing fluid to move across the blood vessels, and this can be linked with edema. Colloids contain particles which are not soluble in water, and they create high osmotic pressure, attracting fluid into the blood vessels. Blood is an example of a commonly administered intravenous colloid. Infusion therapy as a basic toll of modern medical care enables the physician to restore and stabilize homeostasis states quickly and completely. In nursing homes and hospital where patients are suffering from acute dehydration or considerable debilitating conditions, the intra venous fluids are used as I.V. drips. The basic function of I.V. fluids is to replenish the body fluids. Although there are a number of I.V. fluids but generally three types of I.V. fluids are used in hospitals as I.V. drips. Uses and Applications There are main ranges of application of highly specialized intravenous infusion solutions: • Treatment of discarded water and electrolyte metabolism, especially in severe cases. • Therapy of acid base in balances. • The volume substitution and volume replacement in surgery of accident victim suffering blood loss. • Paratral nutrition for severally ill and post-operative patients. • Aqueous isotonic injection (5%) of dextrose is given as intravenous injections to increase the column of circulating blood in the shocks and haemorrhages and to counteract dehydration. When it is desired to replace excessive salt loss also glucose is injected along with sodium chloride. Intravenous fluids can also be used as a route of medication administration. If a doctor wants to delI.V.er a small amount of medication over an extended period of time, it can be dissolved in a bag of intravenous fluids and set on an infusion pump which delivers the medicated fluid directly into the blood. They are also commonly used to assist with surgical recovery; people who receive fluids after surgery tend to experience better recovery than people who do not. Intravenous Fluids Market is expected to witness growth of international market with respect to advancements and innovations including development history, competitive analysis and regional development forecast. The growth of the global intravenous solutions market is driven by several factors. The increasing incidence of gastrointestinal disorders, diabetes, and cancer is one of the major factors that are expected to increase the rate of adoption of intravenous solutions among consumers. The rising popularity of intravenous vitamin C therapy in cancer treatment is one of the major trends in the intravenous solutions market. The intravenous vitamin C solution has been observed to have an increased toxicity to cancer cells and improve the patients' quality of life. Intravenous fluids are extensively used to treat electrolyte imbalances, maintain fluid balance, and replace fluid losses. These fluids are dispensed in volumes ranging from 25-1,000 milliliters and are available in either plastic bags or glass bottles. A complete mixture of all essential nutrients is also available in multi-chamber bags, and these bags are gaining immense popularity among numerous end-users. The global Intravenous (I.V.) solutions market was valued at USD 6.9 billion in 2015 and is projected to grow at a CAGR of 7.8% over the forecast period. The emergence of this market is attributed to the fast growing geriatric population and prevalence of malnutrition in the elderly and pediatric population. Blow-Fill-Seal (BFS) Technology In blow-fill-seal (BFS) technology, which is a form of advanced aseptic manufacturing, the container is formed, filled, and sealed in one continuous, automated system. A primary advantage of this technology is reducing human intervention, which reduces the risk of microbial contamination and foreign particulates. BFS has long been used in liquid pharmaceutical applications, including small containers, such as ophthalmic and respiratory drug ampoules, as well as larger volume containers, such as saline or dextrose solutions. More recently, BFS technology has been expanding into injectable and into biologics, including vaccines and monoclonal antibodies (mAbs). Advantages of BFS Technology: • Blow-fill-seal technology enables the manufacture of preservative-free single-unit doses. PreservatI.V.es are recognized as potentially harmful to the sensitive mucosae of the eyes, nose, and lungs, so this is an enormous benefit to sensitive patients. • Another advantage of unit-doses is that they ensure that the patient takes the correct amount of product, especially when dealing with highly potent compounds, i.e. those therapeutically active at a low concentration. • Sterile unit-doses are portable and easy to use individually, excellent properties for today’s active lifestyles. Blow-fill-seal (BFS) single doses are an ideal solution for use in ophthalmology, respiratory diseases, rhinology, antisepsis and wound care. • Blow-fill-seal technology reduces personnel intervention making it a more robust method for the aseptic preparation of sterile pharmaceuticals. BFS is used for the filling of vials for parenteral preparations and infusions, eye drops, and inhalation products. Generally the plastic containers are made up of polyethylene and polypropylene. Polypropylene is more commonly used to form containers which are further sterilised by autoclaving as polypropylene has greater thermostability. • Blow Fill and Seal technology is mainly used for pharmaceutical solutions. The examples of pharmaceutical solutions that can be packaged are injectable solutions, antibiotics, ophthalmological drops, suspensions, infusion solutions, solutions for dialysis, solutions for irrigation and solutions for hemofiltration. The basic concept of BFS is that a container is formed, filled, and sealed in a continuous process without human intervention, in a sterile enclosed area inside a machine. Thus this technology can be used to aseptically manufacture sterile pharmaceutical liquid dosage forms. The process is multi-stepped: first, pharmaceutical-grade plastic resin is vertically heat extruded through a circular throat to form a hanging tube called the parison. This extruded tube is then enclosed within a two-part mould, and the tube is cut above the mould. The mould is transferred to the filling zone, or sterile filling space, where filling needles (mandrels) are lowered and used to inflate the plastic to form the container within the mould. Following the formation of the container, the mandrel is used to fill the container with liquid. Following filling the mandrels are retracted and a secondary top mould seals the container. All actions take place inside a sterile shrouded chamber inside the machine. The product is then discharged to a non-sterile area for labeling, packaging and distribution. The process begins with the Extrusion of plastic granules in the form of a hot hollow pipe of molten plastic called a parison. The following step is the Blow moulding of the container from the plastic granule. The parison is closed between the mould, and the container gets formed either by blowing sterile compressed air or by vacuum or by using vacuum as well as blowing. The container assumes the shape of the cavity in the mould. The container thus produced is open from the top and in its top part, the plastic is still hot and in molten state until the subsequent steps of filling and container sealing. The subsequent step is filling of the formed container from the top, which is still open (and still in a “hot molten” state). Filling nozzles enter from the top of container and filling is done. Filling nozzles are specially designed and constructed to facilitate automatic cleaning and automatic sterilization. Additional functions of filling nozzles are to blow the bottles and also to provide an exhaust path for air in the container. The filling process can be carried out under a shower of sterile filtered air to avoid contamination during filling. The blower on the sterile air shower can have variable pressure which can be made to change automatically so as to maintain constant air pressure under various situations. The sterile air shower is validated at certain air pressure, and an automatic device can maintain the same pressure by automatically modulating the speed of the blower. The next step is sealing the top of the container, which is still open and in a hot molten state. The top gets pressed between head moulds and as a consequence, the top part of the container gets formed, sealed and at the same time, gets cooled. The result is a hermetically sealed container. The final steps are for De-flashing to remove the flash or scrap, trimming the containers and delivering the containers outside the machine. The whole process of extrusion, blowing, filling, sealing and removing scrap takes between 10 to 18 seconds depending upon the type and size of the container. The advantage of the Blow-Fill-Seal process is derived mainly from the fact that container is formed, quickly filled and sealed under protected environment automatically without human intervention. BFS Machine Professional normal saline I.V. fluids packaging machine is the latest production line with most advanced technology. It can automatically finish film feeding, printing, bag making, filling and sealing in one machine. This BFS line can be used to automatically fill 50-5000ml general solution, special solution, dialysis solution, parenteral nutrition, Antibiotics, Irrigation and Disinfectant solution etc. Features: 1. 100% film utilization: No waste edge between bags, reducing both material and energy consumption. 2. Special I.V. bag design: each bag saves 10mm film than others. 3. Reliable heating and welding system: Leakage rate less than 0.03%. 4. Quick changeover: 0.5-1 hour to switch from one size to another. 5. Stable transmission system: only needs 1 control system, 1 HMI and 1 operator. 6. Safe filling nozzle: No solution overflows, no particles generation. 7. Auto faulty rejection system detected by the machine. 8. Production line length is reduced by 1/3, both workshop and air conditioning and cleaning area are reduced by 1/3, greatly reducing the initial investment and future running cost. 9. Simple structure, more stable and reliable performance. Tags I.V. Fluid Manufacturing Industry, I.V. Fluids Manufacturing Project Report, I.V. Fluids Manufacturing Process, Project Report for I.V. Fluid Plant, I.V. Fluids Manufacturing Equipment, IV Fluids Manufacturing Project Report, I.V. Fluid Manufacturing Plant in India, I.V. Fluids Manufacture, I.V. Fluid Production Plant, I.V. Fluid and Dialysis Solution Manufacturing, Project Report on Dextrose Saline (IV Fluid) Production, I.V. Fluids Production, I.V. Fluid Manufacturing Unit, IV Fluid Manufacturing Business, Pharma Manufacturing Unit in India, Pharmaceutical Company, Intravenous Fluid Production, Project Report on I.V. Fluid, IV Fluid Manufacturing Unit in India, I.V. Fluids Manufacturing Process, I.V. Fluids Manufacturing Equipment, Manufacturing Plant for I.V. Fluid, I.V. Fluid Manufacturing Machine, I.V. Fluids Manufacturing Project Report, IV Fluid Manufacturing Business, Manufacturing Plan of Intravenous Fluid, How to Start I.V. Fluid Production Business, I.V. Solution Manufacturing with BFS Technology, Blow-Fill-Seal Technology, Saline and Dextrose Fluid (IV Fluid) BFS Technology, Blow Fill Seal(BFS) Technology, Project Report on I.V. Fluid (BFS Technology), I.V. Fluid with BFS, Blow-Fill-Seal Machinery, I.V. Fluid Manufacturing using Blow–Fill–Seal Technology, I.V. Fluid Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, IV Fluid Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start I.V. Fluid Manufacturing Industry in India, I.V. Fluid Manufacturing Projects, New project profile on I.V. Fluid Manufacturing industries, Project Report on IV Fluid Manufacturing Industry, Detailed Project Report on IV Fluid Manufacturing, Production of Intravenous Sugar Solution (Dextrose Solution), Saline and Dextrose Fluid (iv Fluid) BFS Technology, Production of Intravenous Sugar Solution, Project Report on I.V. Fluid Manufacturing, Pre-Investment Feasibility Study on IV Solution Manufacturing with BFS Technology, Techno-Economic feasibility study on I.V. Solution Manufacturing with BFS Technology, Feasibility report on I.V. Solution Manufacturing with BFS Technology, Free Project Profile on I.V. Solution Manufacturing with BFS Technology, Project profile on I.V. Solution Manufacturing with BFS Technology, Download free project profile on IV Solution Manufacturing with BFS Technology, Industrial Project Report, Project consultant, Project consultancy, Business guidance to clients, Startup Project for I.V. Solution Manufacturing with BFS Technology, Production of I.V. Fluids (Saline and Dextrose), Intravenous Solution (IV) Manufacturing Business with Blow-Fill-Seal (BFS) Technology
Plant capacity: 48,000 Bottles/Day 500 ml each bottlePlant & machinery: 253.00 Lakhs
Working capital: N/AT.C.I: Cost of Project 834.00Lakhs
Return: 29.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Project Opportunities in Production of Condoms. Latex Condom Manufacturing. How to Manufacture Condoms (Lubricated)?

A condom is a sheath-shaped obstruction device used during sexual intercourse. It is very beneficial for reducing the chances of pregnancy. It also decreases the risk of sexually transmitted infections (STIs) such as HIV/AIDS. There are different types of condoms available in the market with the variety of thickness, texture, material, size, color and taste. Condoms are highly effective to reduce the probability of pregnancy if used consistently and correctly. The use of condoms, conceived primarily as a tool for family planning to curtail population growth, has attained a primacy in arresting the spreading of the dreaded disease, AIDS. Increasing awareness regarding sexually transmitted diseases (STD) and HIV is the major driving factor of condom market in U.S. Increasing prevalence of sexually transmitted diseases (STD) and HIV in U.S. is expected to boost the demand for condoms. In addition, increasing the need for family planning coupled with population control is expected to boost the condom market. India condom market is projected to reach $180 million by 2022 on account of rising consumer awareness about HIV/STIs. Moreover, expanding product portfolio of the leading players, growing e-commerce penetration, rising youth population and increasing trend in average marriable age are expected to act as the other major drivers for India condom market in the coming years. The Indian market has terrific potential. Only 21 percent of the country's 138.9 million eligible couples use condoms at present. If the figure were to rise to 50 per cent, demand would spurt to 5,000 million pieces a year. As domestic demand and export potential grow, other companies are also getting into the act. Drivers: • Rise in use of condoms for family planning propels the market growth. • Innovations in male condoms such as anti-ejaculation chemicals increases consumer interest. • Increase in promotional campaigns on the concept of safe sex, further helping the market to grow. The global condom market is expected to cross $11 billion by 2023. Factors such as an increase in per capita discretionary income of people globally and a rapid growing number of dual-income households in developing as well as developed markets are major growth factors for the global condom market. Male contraceptives will remain the dominant segment despite growing popularity of female condom. Further more comprehensive sex education for the most active demographic segment such as the teenagers is a major driver for the condom market growth. The global market for condoms is on a steady growth trend, backed by increasing emphasis on preventing unwanted pregnancy and sexually transmitted diseases; growing popularity of female condoms; and continuous product innovations by leading manufacturers. Other growth drivers include growing preference for condoms as preferred choice of contraception given the potential health hazards of using contraceptive pills; use of condoms by gays; increased and enhanced commercial advertising stressing upon social acceptance; expanding distribution channels; increasing public health campaigns promoting the concept of safe sex and eye-catching and unique packaging by manufacturers. Initiatives taken up by government are also playing a role in propelling market growth. Condom marketing is moving towards emphasis on improving sexual pleasure. Manufacturers in this regard are constantly innovating new products such as super-thin, biodegradable, and custom-fit condoms. Other innovations include glowing as well as sports-themed condoms, female condoms fitted with Bluetooth outer ring, and male condoms with anti-ejaculation chemicals. One of the major objectives behind all these recent product innovations is to significantly enhance the overall pleasure, and position condom as a product that improves sex. Another notable trend in the condoms market is the growing popularity of female condoms. Female condoms are being viewed as a way of providing females with more control over their own sexual safety, and helps in preventing unwanted pregnancy as well as spread of STDs. Condoms, developing countries are expected to drive future growth given the relatively strong economic activity, and higher proportion of younger demographics. Limited condom users and lack of awareness offer untapped opportunities for growth. Condom use specifically in countries like India and China is growing continuously, on account of increasing population, strong economy, and heightened public awareness that condom provides protection against STIs. Asia-Pacific represents the largest as well as the fastest growing market worldwide. Few Indian Major Players are as under: • Cupid Ltd. • Famy Care Ltd. • HLL Lifecare Ltd. • Medtech Products Ltd. • TTK Biomed Ltd. • TTK Healthcare Ltd • TTK Protective Devices Ltd. Tags Condom Production, How to Manufacture Condom? How Condoms are made? Process of Condom Production, Manufacturing Process of Condom, Condom Manufacturing Plant, Condom Factory in India, Condom Making Plant, Condom Manufacturing Unit, Condom Manufacturing Industry, Condoms Production Plant, Manufacturing of Condoms, Production of Condoms, Condoms Manufacture in India, Condom Manufacture, Condom Manufacturing Process, Condom Manufacturing Business, Condom Manufacturing Business Plan, How to Start a Condom Manufacturing Business, Condom Production, I Want to Start Condom Manufacturing Small Scale Plant, Condom Making Machine, Project Report on Condom Manufacturing, Condom Industry, Condom Manufacturing Company, Condom Manufacturing Factory, Condom Manufacturing Project Report, Condom Manufacturing Equipment, Business Plan for Condom Manufacturing Industry, Condom Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Condom Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Condom Manufacturing Industry in India, Condom Manufacturing Projects, New project profile on Condom Manufacturing industries, Project Report on Condom Manufacturing Industry, Detailed Project Report on Condom Manufacturing Plant, Project Report on Condom Production, Pre-Investment Feasibility Study on Condom Production, Techno-Economic feasibility study on Condom Production, Feasibility report on Condom Production, Free Project Profile on Condom Production, Project profile on Condom Production, Download free project profile on Condom Production, Industrial Project Report, Project consultant, Project consultancy, Business consultancy, Project identification and selection, Preparation of Project Profiles, Business guidance, Business guidance to clients, Startup Project for Condom Production, Contraceptive, Latex Condom Manufacturing, Latex Condom Manufacturing Plant, Male Condom Manufacturing Plant, Latex Condom Manufacture
Plant capacity: 116,666.7 Pcs /DayPlant & machinery: 139.00 Lakhs
Working capital: N/AT.C.I: Cost of Project 400.00Lakhs
Return: 25.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Start Your Own Craft Brewery or Distillery (Startup). Production of Craft Beer. Microbrewery, Pubbrewery, Brew Pub Beer, Beer Manufacturing Plant.

Craft beer is a type of beer brewed in a traditional manner and usually produced in smaller quantities than that of the conventional beer. The production of craft beer generally takes place in regional craft breweries and microbreweries dedicated intensively for craft beer production. The global craft beer market is primarily dominated by the Americas and Europe, with the US being the largest craft beer country-specific market both in terms of volume and revenue. Craft beers are characterized by various innovative and exotic flavors. Craft beers and microbreweries are niche concepts in India which have been growing for past few years and are beginning to take shape now. They are mushrooming in many parts of the country. This is an emerging trend that is certainly attracting middle class Indians, particularly in urban areas. The craft beer market in India is pegged at Rs. 280 crore and may grow to Rs. 4,400 crore by 2020. The big names in the craft beer business including Gateway Brewing Co. (Mumbai), Doolally (Pune/Mumbai), Effingut Brewerkz (Pune), TJ (Pune), The Barking Deer (Mumbai), The White Owl (Mumbai), Irish Village (Pune) and Brewbot (Mumbai) Craft beer is beer the way it was meant to be, the way it was brewed about a hundred years ago. It is made fresh with all natural ingredients and zero chemical or preservative additions. The Indian craft beer industry greatly benefits from the frequent foreign travel that is a part of our IT sector. Craft beer is a beer that is brewed by a small, independent, and traditional brewer. Craft beer is getting more popular in different parts of the world with local and international brewers expanding their network and offering exciting new flavors and tastes. The rising consumer preference for low alcohol by volume (ABV) beer is the main reason for the significant growth of the global craft beer market. As consumers are positively responding and appreciating new styles of flavors of craft beer, the industry will grow rapidly with more players entering the market rapidly. With the use of premium quality raw materials and advanced brewing techniques, brewers have been successful in attracting consumers towards craft beer from mainstream beer. The global craft beer market to grow at a CAGR of 11.04% during the period 2017-2021. The latest trend gaining momentum in the market is increasing exports of craft beer. In the past few years, the American craft beers were not likely to find a place in the beer markets of Europe and Asia. Current scenario, the American craft beers are one of the major reasons behind the increase in demand for craft beers in Asia and Europe. Craft beers are also able to compete successfully with other alcoholic products in the European countries. The demand for exotic, rare, and innovative flavors of craft beers has increased. The growing awareness among the consumers with respect to the wide range of flavors and styles of the craft beer coupled with low alcohol by volume (ABV) percentage is expected to drive demand over the forecast period. Furthermore, the growing number of craft beer enthusiasts in the U.S., Germany, Belgium, UK and Japan is expected to have a positive impact on the market. The U.S. market experienced sluggish growth post-introduction period of the product, owing to the consumer preference for mainstream beer over craft beer. However, advancement in the brewing process and the use of premium quality raw materials has improved the overall characteristics of the product, which has intrigued the attention of the consumers. New varieties and product development have attracted more consumers towards the craft beer and its sale surged globally. For instance, coffee flavored beer and blended beer are found to have high popularity in the Europe. In addition, since the blending tend to lower the shelf-life of the product, they are manufactured and retailed under the craft beer verities. U.S., U.K., Germany and France are amongst the major developed countries holding a major share in the craft beer market. Branding and promotion of flavored variety of craft beer is supporting its sale on a global level. The trend of consumption of craft beer began in western world and spread to other regions rapidly. The increasing purchasing power of consumers, trends of healthy consumption leading to changes in consumption basket of consumers are likely to remain significant. The increasing consumption of craft beer is driven by this desire to socialize and spend some quality time with family and friends. The craft beer is considered fresh and is preferred by mass consumer especially in developed countries and the trend is spreading across the globe. Craft beer has gained its popularity as consumers want to keep experimenting with the various available flavors of beer. Unique flavor and processing method of craft beer is attracting consumer towards its consumption, thus raising its sale. Tags Craft Beer Industry, Craft Beer Production, Brewery Production, Craft Brewing Business, Craft Beer Manufacturing, Beer Manufacturing, How Beer is Made? Craft Brewing Industry, Brewing Industry, Production of Craft Beer, Craft Beer Production Plant, Craft Brewery, Craft Brewing Sector, How to Start Your Own Craft Brewery, Want to Start a Craft Brewery, Starting Your Own Microbrewery, How to Start a Craft Brewery, How to Start a Brewery, How to Start a Successful Craft Beer Brewery, Starting a Craft Brewery, Craft Brewery Startup, Microbrewery Business Plan, How to Open a Brewpub or Microbrewery Business in India, Business Plan for Small Brewery, Business Plan for Starting a Craft Brewery, Start Your Own Craft Brewery or Distillery (Startup), Starting a Brewery Business, Making of Craft Beer, Process of Craft Brewing, Process of Craft Beer Production, Beer Brewing Process, Production Process of Craft Beer, Craft Beer Manufacturing Plant, How to Start Craft Beer Manufacturing Business, Craft Beer Production Plant, Manufacture of Craft Beer, Craft Beer Manufacturing Unit, Craft Beer Manufacturing project ideas, Projects on Small Scale Industries, Small scale industries projects ideas, Craft Beer Manufacturing Based Small Scale Industries Projects, Project profile on small scale industries, How to Start Craft Beer Manufacturing Industry in India, Craft Beer Manufacturing Projects, New project profile on Craft Beer Manufacturing industries, Project Report on Craft Beer Manufacturing Industry, Detailed Project Report on Craft Beer Manufacturing, Project Report on Craft Beer Manufacturing, Pre-Investment Feasibility Study on Craft Beer Production, Techno-Economic feasibility study on Craft Beer Production, Feasibility report on Craft Beer Production, Free Project Profile on Craft Beer Production, Project profile on Craft Beer Production, Download free project profile on Craft Beer Production, Industrial Project Report, Project consultant, Project consultancy, Startup Project for Craft Beer Production, Brewery Startup Consultant, Brewery Consultants in India, Micro Brewery Setup Cost India, Microbrewery Manufacturer, Consultant for Beer Plant, Micro Brewery Equipments and Beer Brewing Equipments, How to Start a Craft Brewery Business. Production of Craft Beer, Craft Beer Manufacturing Plant, Setting up Microbrewery in India, Microbrewery, Pubbrewery, Brew Pub Beer, Beer Manufacturing
Plant capacity: -Plant & machinery: --
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Spices(100% EOU)

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, bulb) of plants used as a flavoring or seasoning, although many can also be used as a herbal medicine. A closely related term, ‘herb’, is used to distinguish plant parts finding the same uses but derived from leafy or soft flowering parts. Spices impart aroma, color and taste to food preparations and sometimes mask undesirable odors. The volatile oils from spices give the aroma and the oleoresins impart the taste. Spices are no longer regarded as wonders of medicine, but they still play an important part in the manufacture of many cosmetics and perfumes and are grown commercially for their coloring and preservative properties. India, known as the home of spices, boasts a long history of trading with the ancient civilisations of Rome and China. Today, Indian spices are the most sought-after globally, given their exquisite aroma, texture, taste and medicinal value. India has the largest domestic market for spices in the world. The demand for spices is expected to grow in the future which will lead to a prominent growth in the revenues from the sales of spices in India. The revenues from India market are expected to expand to around USD 18 billion in FY’2020, growing with a CAGR of ~% from FY’2016 to FY’2020. The highest contribution to this growth is expected to come from the spice mixes and blended spices. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under • A D F Foods Ltd. • Aachi Masala Food'S Pvt. Ltd. • Akay Flavours & Aromatics Pvt. Ltd. • Catch Foods (India) Ltd. • Chordia Food Products Ltd. • Devon Foods Ltd.
Plant capacity: Red Chilli Powder: 200 Kgs. /day Sambhar Masala : 200 Kgs. /day Biryani Masala: 200 Kgs. /day Chicken Fry Masala: 200 Kgs. /day Garam Masala: 200 Kgs. /dayPlant & machinery: Rs 20 lakhs
Working capital: -T.C.I: Cost of Project: Rs 204 lakhs
Return: 29.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Disposable Plastic Syringes

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized condition, ready to use, and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. A syringe is a simple piston pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (the barrel) allowing the syringe to take in and expel a liquid or a gas through an orifice at open end of the tube. Syringes are available in sizes of 1 ml, 2 ml, 5 ml and 10 ml, 50ml in a variety of designs and consist of either two or three components construction. The number of disposable syringes being used has also increased due to the growth in point-of-care administration systems. These systems promote the self-administration of drugs, which can be easily done with modern disposable syringes with improved safety features. The effective result of the above factors of influence on the market – along with a few others – for disposable syringes is expected to translate to a CAGR of 5.6% from 2015 to 2023. This market is expected to be valued above US$9.3 bn by the end of 2023 and close to US$6.5 bn by the end of 2016. India is witnessing a rapid growth across all segments and categories of medical products. India exported US$ 35.22 million worth of syringes and the overall exported quantity was 719.48 million units. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Albert David Ltd. • Disposable Medi-Aids Ltd. • Hindustan Syringes & Medical Devices Ltd. • Lifeline Injects Ltd. • Lifelong Meditech Ltd. • Oyster Medisafe Pvt. Ltd.
Plant capacity: Disposable Plastic Syringes 2 ml Size: 350 Boxes/day Disposable Plastic Syringes 5 ml Size: 350 Boxes/day Disposable Plastic Syringes 10 ml Size: 200 Boxes/day Disposable Plastic Syringes 50 ml Size: 100 Boxes/dayPlant & machinery: Rs 151 lakhs
Working capital: -T.C.I: Cost of Project: Rs 343 lakhs
Return: 26.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Phosphate Rich Organic Manure (PROM)

Phosphates play a vital role in the balanced nutrition of plants. Most of the soils in India are low to medium in phosphate (P) content which requires external application of P for good harvest. Phosphate Rich Organic Manure is produced by co-composting high-grade (32% P2O5 ± 2%) rock phosphate in very fine size (say 80% finer than 54 microns). Needless to say, the finer the rock phosphate the better is the agronomic efficiency of PROM. This substance may be a more efficient way of adding phosphorus to soil than applying chemical fertilizers. PROM is known as a green chemistry phosphatic fertilizer. Addition of natural minerals or synthetic oxides in water-insoluble forms that contain micronutrients such as copper, zinc, and cobalt may improve the efficiency of PROM. To promote organic agriculture system Government of India launched National Programme for Organic Production (NPOP) in the year 2001. NPOP defined the standards, accreditation procedures and established a credible certification system which is now well established nationally and internationally. In India, agriculture has been practiced for thousands of years, which was essentially organic, is also the repository of traditional wisdom and genetic germplasm. Civil society organizations and innovative farmers have developed technologies which are not only effective and productive, but are also explainable and accepted by the modern science. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Accord Hydro air Pvt. Ltd. • Advance Crop care (India) Pvt. Ltd. • Agro Phos (India) Ltd. • Alchemy Processors Pvt. Ltd. • Almighty Crop Science Pvt. Ltd. • Andhra Pradesh State Agro Inds. Devp. Corpn. Ltd.
Plant capacity: Phosphate Rich Organic Manure (PROM): 1000000 MT /AnnumPlant & machinery: Plant & Machinery: Rs 290 lakhs
Working capital: -T.C.I: Cost of Project : Rs 4612 lakhs
Return: 29.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Hexamethoxymethyl Melamine (HMMM)

Hexamethoxymethyl Melamine (HMMM) HMMM is a Hexa (methoxymethyl) melamine resin. It is used as a crosslinking agent with resorcinol or a novolak resin and as an adhesion promoter in rubber compounds with a variety of substrates. Hexamethoxymethyl melamine (HMMM) which supplied in liquid form. It is a versatile crosslinking agent for a wide range of polymeric materials, both organo-soluble and water-borne. It is soluble in most commonly used organic solvent but solubility in water is limited-when blended with most other water-reduciable resins, tolerates dilution in water. Indian manufacturers and importers imports MELAMINE under HS Code 29. Authentic and complete Indian importers data and import statistical report of MELAMINE are compiled from daily list of customs. Laminates was the dominant segment of the global melamine market in 2014. A similar trend is expected to continue between 2015 and 2023. The segment accounted for more than 50% share of the global melamine market in 2014 and is anticipated to be the fastest-growing market during the forecast period. Adhesives & sealants and others are projected to play a crucial role in growth of the global melamine market from 2015 to 2023. Thus, due to demand it is best to invest in this project. Few Indian major players are as under • Adarsh Chemicals & Fertilisers Ltd. • Gujarat State Fertilizers & Chemicals Ltd. • Jay Chemical Inds. Ltd
Plant capacity: Hexamethoxymethyl Melamine (HMMM)6 M/DayPlant & machinery: Rs 185 lakhs
Working capital: -T.C.I: Cost of Project: Rs 600 lakhs
Return: 27.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Agricultural Warehouse with Cold Storage

Warehousing plays a very vital role in promoting agriculture marketing, rural banking and financing and ensuring Food Security in the county. It enables the markets to ease the pressure during harvest season and to maintain uninterrupted supply of agricultural commodities during off season. Warehousing refers to the activities involving storage of goods on a large-scale in a systematic and orderly manner and making them available conveniently when needed. Availability of proper cold storages are important for preserving perishable commodities like milk, meat, eggs, vegetables, fruits, ornamental flowers and other floricultural goods. These cold storages give perishable food items a longer shelf life by preventing them from rotting due to humidity, high temperature and micro-organisms. A cold storage facility accessible to them will go a long way in removing the risk of distress sale to ensure better returns. Warehousing plays a very vital role in promoting agriculture marketing, rural banking and financing and ensuring Food Security in the country. Indian transportation and logistics market witnesses new heights; there has been increasing buzz around technology adoption, network optimization, multimodal transportation and improving warehousing. The latter in particular has been evolving rapidly from traditional 'go downs’ to modern facilities. Indian logistics market is expected to grow at a CAGR of 12.17% by 2020 driven by the growth in the manufacturing, retail, FMCG and e-commerce sectors. Indian cold storage market is expected to grow at a CAGR of 16.09% by 2020 driven by the growth in the organized retail, Indian fast food market, and food processing industry and e-commerce sectors. This facilitates the development of new technologies and ensures a high quality product.
Plant capacity: Sacks Store in Warehouse: 50000 Units /Day Cold Storage: 65 Units /DayPlant & machinery: Rs 276 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1468 lakhs
Return: 21.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Bicycle and Cycle Rickshaw Manufacturing

A Bicycle, is a human-powered, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. Bicycles are one of the oldest forms of transportation. Even today millions of people travel by bicycle daily to their work, college, universities and distant places. The cycle rickshaw is a small-scale local means of transport; it is also known by a variety of other names such as bike taxi, velotaxi, pedicab, bikecab, cyclo, beca, becak, trisikad, or trishaw. A Cycle Rickshaw is often hailed as environment-friendly and an inexpensive mode of transportation. The Indian bicycle industry, the second largest in the world, produces around 10 to 14 mn units annually. China leads with a production of over 50 mn units. The total world market is estimated at close to 100 mn units. The bicycle market in India is expected to register a CAGR of more than 8% in terms of value during the forecasted period of 2016-17 to 2021-22. There are guesstimates that close to 1 million cycle rickshaws ply on the Indian roads carrying about 3-4 billion passengers-km/year. In some cities they are the major means of transport. They provide employment to about 700,000 rickshaw pullers, are very maneuverable and are completely non-polluting and hence environmentally friendly means of transport. Thus, as an entrepreneur this project offers an exciting opportunity to you. Few Indian major players are as under • Atlas Cycles (Sonepat) Ltd. • Avon Cycles Ltd. • Cycle Corporation Of India Ltd. • Deepak International Ltd. • Dewan Steels Ltd. • Eastman Industries Ltd.
Plant capacity: Bicycles (Different Sizes): 1000 Nos. /Day Cycle Rickshaw: 1000 Nos. DayPlant & machinery: Rs 336 lakhs
Working capital: N/AT.C.I: Cost of Project: Rs 1525 lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 47 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 47 253 254   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top