REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Tripura- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Tripura is a state in Northeast India. The third-smallest state in the country, it covers 10,491 km2 (4,051 sq mi) and is bordered by Bangladesh (East Bengal) to the north, south, and west, and the Indian states of Assam and Mizoram to the east. Tripura is a landlocked state in North East India. The state has a tropical savanna climate, designated Aw under the Köppen climate classification. The undulating topography leads to local variations, particularly in the hill ranges. The four main seasons are winter, from December to February; pre-monsoon or summer, from March to April; monsoon, from May to September; and post-monsoon, from October to November.

Tripura's gross state domestic product for 2010–11 was 129.47 billion (US$2.1 billion) at constant price (2004–05), recording 5.71 per cent growth over the previous year. In the same period, the GDP of India was 48778.42 billion (US$790 billion), with a growth rate of 8.55 per cent. Tripura is an agrarian state with more than half of the population dependent on agriculture and allied activities. However, due to hilly terrain and forest cover, only 27 per cent of the land is available for cultivation. Rice, the major crop of the state, is cultivated in 91 per cent of the cropped area.

TOURISM

Tripura has a geographical area of about 10,492 sq. km. almost two-thirds of the state is under hilly terrain and it is surrounded on three sides by the deltaic basin of Bangladesh. The Tripura tribal’s are divided into two groups: Puran Tripuras and Natun Tripuras. The Puran Tripuras are the original inhabitants of the State and constitute a little over 16% of the total and 57% of the tribal population of the State. The Department of Tourism, Govt. of India, under the ministry of Tourism and Culture has been providing liberal financial and technical support for the tourism development in the state based on the projects received from the states. It is quite clear that Tripura has tremendous and quite unique tourism potential. This could be tapped mainly through the concept of Eco-tourism and Heritage tourism. Nature / wildlife tourism, adventure tourism, rural tourism, leisure tourism, pilgrimage tourism, international border tourism could be some special tourist packages. The Tourism Development in the Northeast region will depend on integrated approach, involving various government departments, private entrepreneurs, voluntary organizations and local community. This approach will also help in evolving local people’s perception towards tourism development as a strong tool for socio-economic up liftment.

INDUSTRIAL SECTOR

The State Government offers a package of incentives for setting up of industrial units, which is comparable to other states. Besides, the special incentive package i.e. North East Industrial and Investment Promotion Policy (NEIIP) declared by the Government of India for the North East Region is available to industrial units.

State Package of Incentives under Tripura Industrial Investment Promotion Incentive Scheme-

•                    Capital Investment Subsidy @ 30% and additional subsidy @ 2.5% for enterprises of ST, SC, & women individuals on Fixed Capital Investment.

•                    Full Reimbursement of Standard Certification Fees /Charges / other expenses on account of obtaining a standard Certification.

•                    Provides State Transport Subsidy for covering the portion for which Central Transport Subsidy is not available

•                    85% Exemption from the payment of Earnest Money and Security Deposits on tenders floated by State Govt. Department / Agencies.

Incentives declared by Central Government:

•                    Exemption of Excise Duty on finished products.

•                    Central Transport Subsidy.

•                    Income Tax Benefit.

•                    Capital Investment Subsidy.

•                    Comprehensive Insurance Scheme for insurance coverage. Subsidies to service sector, bio-technology and power generating industries.

INVESTMENT OPPORTUNITIES

Tripura offers an investor-friendly environment. The Government welcomes investments into the State, from both domestic and foreign investors.

•        Natural gas

Tripura has vast reserves of natural gas in non-associate form. The gas is of high quality, with high methane content of up to 97%. The availability of superior quality natural gas, at concessional price, offers a great opportunity to prospective investors, to set up gas-based industrial units, using natural gas

•        Information Technology (IT)

Tripura has been considered the second best IT destination in the North East. IT sector (including IT-enabled services) has been identified as one of the major potential growth sectors by the state. The high literacy rate of the State provides additional advantage for development of the sector.

•        Food Processing

The State government has identified food processing as a major thrust area. There is a vast potential for setting up of food processing units in the State. The agro-climatic conditions in Tripura are ideally suited for production of a large variety of horticultural crops.

•        Handicrafts

From time immemorial, Tripura has carved out a name for itself in the field of handicrafts. The gifted artisans produce wonderful objects of crafts from simple material like cane, bamboo and wood.

•        Tourism

Tripura is an attractive tourist destination. The state has a rich cultural heritage. There are number of historical Hindu and Buddhist sites.


INDUSTRIAL POLICY

•        To improve Basic as well Industrial Infrastructure.

•        Industrial Growth by attracting Private Investment.

•        To improve investment climate towards better regulation by removing barriers to competition.

•        Creation of hassle-free and congenial investment climate.

•        To bring significant increase in the State Domestic Product.

•        Widening of resources base of the state.

•        Development of connectivity (Internal road, railways and air & telecom).

•        Better social infrastructure Enabling Entrepreneurship -building capacities through entrepreneurial and technical skills, training and promotion of self-employment.

 THRUST AREAS

•        Natural Gas

•        Food Processing

•        Rubber

•        Tea

•        Handicraft

•        Bamboo

•        Handloom

•        Tourism

•        Information Technology

•        Education

  •           Healthcare

The Department of Industries & Commerce was established to promote Village and Small-scale industries as well as medium and large scale industries in the State. While efforts are being made to promote entrepreneurship within the State, the outside investors in the public and private sectors are also encouraged both for their financial capabilities and technical expertise, for the medium and large-scale units. The major existing industrial area is the Industrial Growth Centre Complex at Bodhjungnagar which also includes Food Park, Rubber Park and Export Promotion Industrial Park. The other industrial sites near Agartala as the main business and industrial centres are Dukli, Arundhatinagar and Badharghat. The mineral resources are minor amounts of glass sands, limestone, plastic clay and hard rock and all of these materials are being used in varying degrees. Setting up of ceramic tiles unit and other mineral based industries are being encouraged in the private sector.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 43 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 43 253 254   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Wood Plastic Composite (WPC)

Wood-plastic composites (WPCs) are a product class that has been developing over the last 40 years resulting in increased applications and expanded market share. More specifically, WPCs are composites containing a wood component in particle form (wood particles/wood flour) and a polymer matrix. WPC or wood-plastic composite is a material made of wood powder or cellulose products such as cellulose fibers, lignin, and etc.; and also polyolefin, especially polypropylene which for different usage they have found different application. Wood is often used in plastics as a means to reduce price compared to a solid plastic product. Wood is often used in plastics as a means to reduce price compared to a solid plastic product. Wood plastic composite is good to solve the problem arises in the environment. There is scope of use agricultural waste product. In this case we will use waste polypropylene or polyethylene, or it may be used virgin polypropylene or polyethylene, waste wood flour. Rice husk, plastic additives like (DOP, DBP etc).The majority of WPCs are manufactured by profile extrusion, in which molten composite material is forced through a die to make a continuous profile of the desired shape. Wood plastic composites are an important and growing segment of the forest products industry. This industry segment has grown in double digit percentages annually for the past decade. In North America, the WPC market has been dominated by rail and decking products while in Europe more emphasis has been placed on automotive applications.The wood plastic composite market is projected to grow from $ 2579.90 million in last year to $4,601.7 million by 2019, with a CAGR of 12.2%. Polyethylene is the single-largest segment, holding 56.6% share of the global wood plastic composite market in last year and is projected to grow with a CAGR of 12.0% in 2019. North America is the largest market of polyethylene and Asia stood second in 2014.The demand for building and construction segment accounted for the largest share in 2014, at $2,579.9 million, and it is projected to reach $4,601.7 million by 2019. Entrepreneurs who invest in this project will be successful. Few major players are as under • Advanced Environmental Recycling Technologies • Beologic • Polymera Inc. • Fineko • Guangzhou Kindwood Co. Ltd • JELU-WERK J. Ehrler GmbH & Co. KG • Perth Wood Plastic Composite Company Ltd
Plant capacity: 1,440,000 KGS/annumPlant & machinery: 146 lakhs
Working capital: -T.C.I: Cost of Project: 391 lakhs
Return: 26.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

IV Fluids

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use.Fluids are given when someone's body fluid volume falls. There are a number of things which can cause a drop in fluid volume. Vomiting and diarrhea are a classic example, which is why people are encouraged to drink fluids when they are sick, to keep their fluid volume stable.. When crystalloids are administered, they tend to create low osmotic pressure, allowing fluid to move across the blood vessels, and this can be linked with edema.Intravenous fluids can be broken into two broad groups. Crystalloids such as saline solutions contain a solution of molecules which can dissolve in water.The specific one used depends on the situation. Many other compounds can be added to the IV solution as a simple means of administration. For example, antibiotics, pain killers and so on can be added to the IV so the patient receives the drug at a constant rate over a long period of time. The Indian pharmaceutical industry is the fourth largest in the world in terms of volume of output and thirteenth in domestic demand. However, the Indian industry, valued at USD 17 bn in represented just over 1% of the global pharmaceutical industry (USD 1700 bn) in value terms. The domestic market is estimated at Rs 680 bn. The Indian manufacturing sector with an average annual growth rate of about 14% during the quinquennium 2002-2007. It is projected to grow at an average annual rate exceeding 15% during 2007-2010 and is likely to reach the level of about USD 23 to 28 bn in 2010. Parenteral Drugs India Ltd (PDIL) is the leading IV fluid producer in India with a capacity of 33 crore bottles a year and a market share of over 25 per cent. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Abaris Healthcare Pvt. Ltd. • AhlconParenterals (India) Ltd. • AxaParenterals Ltd. • Infutec Healthcare Ltd. • Kokad Pharmaceutical Laboratories Ltd. • Parenteral Surgicals Ltd.
Plant capacity: 27,000,000 Bottles/annumPlant & machinery: 476 lakhs
Working capital: -T.C.I: Cost of Project: Rs1060 lakhs
Return: 26.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Fruit Juice in Aseptic Packaging

A freshly squeezed orange or fresh pulped and strained apple would supply a fruit juice drink for immediate consumption, but to expect it to maintain its quality for even a day or two was tempting providence. Nowadays, with the benefit of ultra-high temperature (UHT) pasteurization, aseptic packaging techniques and systems, pressed juices can be stored for extended periods with very little deterioration in quality. Previously, reliance had to be places upon the use of preservatives and ‘classical’ pasteurization at lower temperatures (70ºC+) and longer holding times.Advances in instrumental analytical techniques have made it possible to identify those chemicals in natural extracts (whether of fruit or botanical origin) that provide the characteristic flavorprofile. This analytical knowledge, apart from leading the way to ‘designer drinks’, has also served to maintain and standardize the quality of a range of beverage types that still base their success upon traditional fruit juice systems. The majority of the active flavor components of most fruit types have been identified (TNO-CIVO) and provide the beverage technologist with a basis for the addition of certain characters in the development of a new product. The increasing numbers of health-conscious consumers in India, especially in the country’s urban areas, who are more focused on functionality and nutrition in their beverages rather than just their thirst quenching properties and convenience, drove the positive sales growth seen in juice in 2016. India fruit juice based beverages market was valued at INR billion in FY’2014 and has inclined from INR billion in FY’2010 registering a CAGR of over 21.6% during FY'2010-14. The growth of the market over this period has been fueled by the growing urbanization, rising disposable income and surging middle class. Fruit based beverages are largely consumed by the urban population, particularly by the middle class and upper class segment of the Indian population. The increasing disposable income and rising occurrences of diseases resulting from unhealthy lifestyles have greatly impacted the growth curve of the market over the years. The fruit-based beverages category is one of the fastest growing categories, and has grown at a CAGR of over 30% over the past decade. At present, the Indian juices market is valued at INR 1100 crore (USD 200 million) and is projected to grow at a CAGR of 15% over the next three years. Due to heavy demand it is a good project for entrepreneurs to invest.
Plant capacity: 3,750,000 Ltrs. /annumPlant & machinery: 96 lakhs
Working capital: -T.C.I: Cost of Project:1144 lakhs
Return: 3.00%Break even: 85.00%
Add to Inquiry Add to Inquiry Basket

LPG Cylinders (Domestic and Commercial)

LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooking purpose. The body of LPG cylinder is deep drawn in two pieces then these are welded together to make a compact unit without any leak and defect etc. LPG cylinders are in use in 5 Kg., 12 Kg., 14.2 Kg. & 19 Kg. capacities. To ascertain the quality, safety and performance certain regulations are applicable such as BIS standardization and Explosive License etc. While all the cylinders are spray-painted with a signal red colour. BPC cylinders have yellow ring around the bung. HPC cylinders in blue ring and IOC cylinder are fully red. In case of 19 Kg. cylinder the top is painted olive green. The cylinders carry their complete history with regard to their serial number, Tare/Gross weight, water capacity, ISE monogram test date, manufacturer identification and year of manufacturing. For domestic use, cylinders typically will have capacities ranging from 4kg to 15kg whereas for commercial and industrial use, these will range from 45kg to 50kg. Smaller cylinders i.e. 1kg to 3kg capacities are used for camping equipment and in developing countries where they often serve as an entry level for LP Gas applications in low income households - mainly for cooking. LP Gas cylinders will almost always be used in the vertical position although forklift cylinders are typically designed to be used horizontally with capacities ranging from 15kg to 22kg. LPG consumption in India is forecast to surpass 35 MMT by FY26. North region dominated India LPG market over the past few years, and is further forecast to continue dominating the market through FY26. Liquefied petroleum gas (LPG) is a flammable mixture of various hydrocarbons, and majorly consists of propane and butane. LPG gas is colorless and odorless; and emits less quantity of CO2 when compared to petrol or diesel. Thus, LPG is extensively used as a cooking fuel, both in commercial and residential setups throughout the country. Few Indian major players are as under • Balaji Pressure Vessels Pvt. Ltd. • Bhiwadi Cylinders Pvt. Ltd. • Confidence Petroleum India Ltd. • E C P Industries Ltd. • Everest Kanto Cylinder Ltd. • J R Fabricators Ltd. • Jay F E Cylinders Ltd. • Kanyaka Parameshwari Engg. Ltd. • Lizer Cylinders Ltd. • Mahaveer Cylinders Ltd. • Minda Autogas Ltd. • North India Wires Ltd. • Punjab Gas Cylinders Ltd. • Sanmati Metals Ltd. • Sreenidhi Engineering Ltd. • Surya Shakti Vessels Pvt. Ltd. • Tirupati L P G Inds. Pvt. Ltd. • Trend East West Lpg Bottling Ltd. • Universal Cylinders Ltd. • Worthington Nitin Cylinders Pvt. Ltd.
Plant capacity: LPG Cylinders (Domestic 14.2 Kgs Size) 640 nos. per day LPG Cylinders (Commerical 18 Kgs Size) 560 nos. per dayPlant & machinery: 88 lakhs
Working capital: -T.C.I: Cost of Project : 391 lakhs
Return: 32.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

LPG Cylinders (Domestic and Commercial)

LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooking purpose. The body of LPG cylinder is deep drawn in two pieces then these are welded together to make a compact unit without any leak and defect etc. LPG cylinders are in use in 5 Kg., 12 Kg., 14.2 Kg. & 19 Kg. capacities. While all the cylinders are spray-painted with a signal red color. BPC cylinders have yellow ring around the bung. HPC cylinders in blue ring and IOC cylinder are fully red. In case of 19 Kg. cylinders the top is painted olive green. The cylinders carry their complete history with regard to their serial number, Tare/Gross weight, water capacity, ISE monogram test date, manufacturer identification and year of manufacturing. For domestic use, cylinders typically will have capacities ranging from 4kg to 15kg whereas for commercial and industrial use, these will range from 45kg to 50kg. India is the world's second largest consumer of LPG in the domestic sector, doing over 18 million tons each year. This is achieved through more than 200 LPG Bottling plans are operational across the country. On March 27, 2015 PM had officially launched the 'Give-it-Up' campaign, urging the well-off to surrender their LPG subsidy so that it can be targeted for the needy. The aim is also to bring down the country's dependence on energy imports by 10 per cent by 2022. LPG consumption in India is forecast to surpass 35 MMT by FY26. We actively encourage a culture of innovation, which facilitates the development of new technologies and ensure a high quality product. Few Indian major players are as under • Balaji Pressure Vessels Pvt. Ltd. • Bhiwadi Cylinders Pvt. Ltd. • Confidence Petroleum India Ltd. • E C P Industries Ltd. • Everest Kanto Cylinder Ltd. • J R Fabricators Ltd.
Plant capacity: LPG Cylinders (Domestic 14.2 Kgs Size): 640 Nos. /Day LPG Cylinders (Commercial 19 Kgs Size): 560 Nos. /DayPlant & machinery: 88 lakhs
Working capital: -T.C.I: Cost of Project: Rs 392 lakhs
Return: 33.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Roller Flour Mill

Roller Flour Mills involved in commercial milling operations and unorganized sector consisting of mainly Chakkis. Around 800 large Flour Mills in the country convert about 10.5 Million Tons of wheat into wheat products i.e., Coarse Flour, Flour, Semolina, Bran & Wheat Germ. The installed capacity of Flour Mills is more than 21 Million Metric Tons. Roller Flour Milling sector processes around 12 – 15 per cent of the total wheat consumed in the country, the balance being processed through Stone Chakkis. The majority of units have an average installed capacity of 70 tons per day and only around 10 per cent of the mills are above the capacity of 120 Tons per day. Maida is finely milled flour and is usually refined using a fine mesh of 600 mesh per square inch. Sooji/Rava is used in many sweetmeat products. Bran separated on milling is used as cattle feed. The products sold under brand names are very few. The concept for branded cereal flour products is now increasing. The big giants like Hindustan Lever, NEPC Agroand Nirma etc. have jumped in to this lucrative industry. Indian agriculture is now going through critical times. On the one hand, relying on the strength of Green Revolution strategy and having emerged as an exporter of grains and food products, the government is keen to enact a Food Security law to ensure availability of food grains to every individual in the country. India, the second largest producer of the food grain, is estimated to have imported 5.2 lakh tones of wheat in the year ended March 31, 2016, compared with 52,000 tones the year before, the Roller Flour Millers' Federation of India said. According to research, the packaged wheat flour market in India is growing at whooping CAGR of almost 19% since past three years. If the growth trajectory remains the same, market may likely to touch the new height of more than Rs 7500 crore in current fiscal (2015-16) itself. As a whole there is a good scope for new entrepreneur to invest in this business. Few Indian major players are as under • Ambe Agro Inds. Ltd. • Arpan Foods Ltd. • Aruppukottai Shri Ramalinga Roller Flour Mills Ltd. • B P Food Products Pvt. Ltd. • Bambino Food Inds. Ltd. • Bannari Amman Flour Mill Ltd. • Bhawani Roller Flour Mills Ltd.
Plant capacity: Maida: 50 MT /Day Sooji: 12 MT /Day Wheat Flour : 20 MT /Day Wheat BranPlant & machinery: 323 lakhs
Working capital: -T.C.I: Cost of Project : Rs 746 lakhs
Return: 29.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Wood Plastic Composite (WPC)

WPCs are composites containing a wood component in particle form (wood particles/wood flour) and a polymer matrix. They are used in a variety of structural and non-structural applications ranging from component and product prototyping to outdoor decking. Wood plastic composites (WPCs) are roughly 50:50 mixtures of thermoplastic polymers and small wood particles. WPCs can be formed into almost any shape and thus are used for a wide variety of applications, including windows, door frames, interior panels in cars, railings, fences, landscaping timbers, cladding and siding, park benches, molding and furniture.This product is part of the composites to be named wood polymer composite (WPC), wood fiber composite (WFC), poly wood and pall wood, poly board, wood flex, stock wood and wood plastic. WPC is manufactured by dispersing wood particles into molten plastic with coupling agent or additives to form composite material through various techniques of processing such as extrusion, compression or injection molding. The majority of WPCs are manufactured by profile extrusion, in which molten composite material is forced through a die to make a continuous profile of the desired shape. Wood plastic composites are an important and growing segment of the forest products industry. This industry segment has grown in double digit percentages annually for the past decade. In North America, the WPC market has been dominated by rail and decking products while in Europe more emphasis has been placed on automotive applications. The wood plastic composite market is projected to grow from $ 2579.90 million in last year to $4,601.7 million by 2019, with a CAGR of 12.2%. Automotive industry is the most crucial sector in the Europe and accounts over 4% of European GDP. Germany dominated the premium car production in 2015 accounting over 40% of the total market. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: 4800 Kgs /DayPlant & machinery: 146 lakhs
Working capital: -T.C.I: Cost of Project: 391 lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

HDPE/PP Woven Fabric

Woven is a method by many threads or tapes woven in two directions (warp and weft), to form a fabric for plastic industry needs. In the plastic woven industry, with a plastic film is drawn into filaments, woven into fabric/sheet/cloth. Woven polypropylene is a great fabric to print on and can be choose normal easy printing such as simple brand text and image with three colors, also full color printing with BOPP lamination. HDPE/PP Woven Fabrics are used in various end applications like Grain & Pulses Bags, Foods & Spices Bags, Animal Food Bags and Fertilizers& Chemical Bags etc. Woven fabric is a textile formed by weaving. It is produced on a loom, and made of many threads woven on a warp and a weft. As use of technical textiles is dictated by need, its pricing normally offers good margins. Flexible Intermediate Bulk Containers (FIBC's): The FIBC is a large bag made of woven polypropylene (PP) fabric that is usually extrusion coated to provide additional barrier and leak-proofness. The bag is constructed by stitching the bag and adding accessories like handles or straps/loops to facilitate mechanized handling. Indian FIBC industry is estimated to be about 125,000 MT per year valued at some Rs. 1,350 crores. It has registered a compounded annual growth rate of 15-20 percent over the last 10 years. The demand is growing at around 16-17% YoY for the last three years. Forecasts indicate that this demand in India is likely to increase and reach around 1.5 Mil tones by 2013-14. As a whole entrepreneur can venture in this field will be successful. Few Indian major players are as under • Abdos Polymers Ltd. • Agarwal Polysacks Pvt. Ltd. • Ambica Fab Design Pvt. Ltd. • Anya Polytech & Fertilizers Pvt. Ltd. • Ashoka Poly Laminators Ltd. • Bardanwala Plastics Pvt. Ltd.
Plant capacity: 8.4 MT/DayPlant & machinery: 500 lakhs
Working capital: -T.C.I: Cost of Project: Rs 923 lakhs
Return: 28.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

NPK Compound Fertilizer (Granular Type)

Fertilizers are soil amendments applied to promote plant growth, the main nutrients added in fertilizer are nitrogen, phosphorus, potassium and other nutrients are added in smaller amounts. Collectively, the main nutrients vital to plants by weight are called macronutrients, including: nitrogen (N), phosphorus (P), and potassium (K) (i.e. N- P-K). NPK ratings consist of three numbers separated by dashes (e.g., 10-10-10 or 16-4-8) describing the chemical content of fertilizers. The first number represents the percentage of nitrogen in the product; the second number, P2O5 the third, K2O. Fertilizers do not actually contain P2O5 or K2O, but the system is a conventional shorthand for the amount of the phosphorus (P) or potassium (K) in a fertilizer. A 50-pound (23 kg) bag of fertilizer labeled 16-4-8 contains 8 lb (3.6 kg) of nitrogen (16% of the 50 pounds), an amount of phosphorus equivalent to that in 2 pounds of P2O5 (4% of 50 pounds), and 4 pounds of K2O (8% of 50 pounds). Compound fertilizers are N-P-K fertilizers with other elements purposely intermixed. Fertilizers are classified according to the content of these three elements. Labeling is according to relative amounts of each of the three elements by weight (i.e., mass fraction). The development of the agriculture sector and improvement of the living standards of small-scale farmers are priorities of the Government of Malaysia. A higher level of agricultural production requires an increased and/or more efficient use of inputs, especially fertilizers. The main sources of imported urea were from Indonesia (54.5% valued at RM 286.1 million), China (21.0% valued at RM110.2 million). Urea export by Malaysia, has been trending upward since 2004 (RM492.0 million) to 2008 (RM 900.0 million). The major importing countries of Malaysian urea in 2008 were 8 Thailand (32.5%), Australia (26.8%), Japan (13.5%), India (14.0%) and the Philippines (6.0%). The global trade in NPKs grew from 13mn t in 2010 to16mn t in 2016.Russia has continued to increase export capacity, Moroccan NPK exports leapt from 74kt in 2013 to 840kt by 2016,Belarus NPK exports have also grown strongly from around 250kt in 2009/10 to 800kt in 2016.
Plant capacity: 400 Mt/DayPlant & machinery: 2613 lakhs
Working capital: -T.C.I: Cost of Project: Rs 5581 lakhs
Return: 27.00%Break even: 72.00%
Add to Inquiry Add to Inquiry Basket

Power Transformer

A transformer is a device that transfers electrical energy from one circuit to another through inductively coupled conductors—the transformer's coils. A varying current in the first or primary winding creates a varying magnetic flux in the transformer's core and thus a varying magnetic field through the secondary winding. This varying magnetic field induces a varying electromotive force (EMF), or "voltage", in the secondary winding. This effect is called inductive. Transformers range in size from a thumbnail-sized coupling transformer hidden inside a stage microphone to huge units weighing hundreds of tons used to interconnect portions of power grids. A transformer is a device for transferring energy in a system from one circuit to another. It consists of two independent electric circuits linked with a common magnetic circuit. This energy at low voltage may be transformed to energy at high voltage, or vice versa. In the like manner, current of a given value in one circuit may be transformed into current of another value in a different circuit. Transformers having more than one primary or secondary winding etc. Power transformers are devices that facilitate transfer of power between electrical networks of different voltages. The global power transformers market was estimated to be 11,352 units in 2013 and is expected to reach 16,994 units by 2020, at a CAGR of 5.9% from 2014 to 2020. In terms of revenue, the market is expected to grow from USD 18.55 billion in 2013 to USD 28.22 billion in 2020 at a CAGR of 6.2% from 2014 to 2020. India is known to be an active supplier of transformers to nations worldwide. According to recently published TechSci Research report "India Power and Distribution Transformers Market Forecast and Opportunities, 2020" the market for power and distribution transformers in India is projected to grow at a CAGR of 10.5% during 2015-20. Transformer Market in India had estimated that over 400 GVA of transformer capacity out of the total installed capacity of 1040 GVA would require repair/retrofit/ replacement (as of 2012) and the number is slated to increase to 1548 GVA by 2020 out of estimated installed base of 1548 GVA. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under • Aditya Vidyut Appliances Ltd. • Alfa Transformers Ltd. • Altair Electronics Ltd. • Apex Electricals Ltd. • B R G Energy Ltd. • Bharat Bijlee Ltd. • Calcom Vision Ltd.
Plant capacity: Power Transformer(132/33 KV, 50 MVA Core Type Oil Cooled): 50 Nos. /annumPlant & machinery: 224 lakhs
Working capital: -T.C.I: Cost of Project:1043 lakhs
Return: 29.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 43 of 254 | Total 2538 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 43 253 254   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top