Google Search

Search

Already a Member ?

Best Business Opportunities in Nepal - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Nepal encourages foreign investment both as joint venture operations with Nepalese investors or as 100 per cent foreign-owned enterprises. The few sectors that are not open to foreign investment are either reserved for national entrepreneurs in order to promote small local enterprises and protect indigenous skills and expertise or are restricted for national security reasons. Nepal is close to India and China which will have the largest surge in the middle class population in the history of the world. As families become smaller and wealthier, they will start eating well. Meat consumption will rise. It will take more agricultural resources to produce more meat. Buying shares in tourism-related stocks such as hotels, airlines or restaurants is a passive way to tap this potential. You can also open a resort or travel agency in anticipation of the boom. Nepal's exports of mainly carpets, clothing, hemp, leather goods, jute goods and grain

For the past few decades, the major investment opportunities have emerged sure to give us a proper financial result (i.e, collection of the investment and generation of profit from the invested capital) are Hydro-electricity generation, Tourism and Agriculture. Even though there are other sectors and opportunities to invest time, capital and labour in, these three are the most effective and productive in the long run.

 

Business Sectors

Agriculture Industry

Agriculture employs 76% of the workforce, services 18% and manufacturing and craft-based industry 6%. Agricultural produce – mostly grown in the Terai region bordering India – includes tea, rice, corn, wheat, sugarcane, root crops, milk, and water buffalo meat. Industry mainly involves the processing of agricultural produce, including jute, sugarcane, tobacco, and grain. In trying to increase agricultural production and diversify the agricultural base, the government focused on irrigation, the use of fertilizers and insecticides, the introduction of new implements and new seeds of high-yield varieties, and the provision of credit. Although new agricultural technologies helped increase food production, there still was room for further growth. Past experience indicated bottlenecks, however, in using modern technology to achieve a healthy growth.

Government efforts to boost the agricultural economy have focused on easing dependence on weather conditions, increasing productivity, and diversifying the range of crops for local consumption, export, and industrial inputs. Solutions have included the deployment of irrigation, chemical fertilizers, and improved seed varieties, together with credit provision, technical advice, and limited mechanization.

Agriculture provides agricultural raw materials to the industries and industries produce manufactured or finished products from those raw materials. Thus, we have seen that without agricultural raw materials, agro-based industries cannot run. The development of agro-based industries depends upon the availability of agricultural raw materials.

There may be investment opportunities in:

  • Dall Mill (Split Dalls/ Pulses for Chhilke-wali Moong, Urad, Arhar, Channa, Masoor)
  • Poha (Rice Flakes)
  • Atta, Maida Suji & Wheat Bran (Wheat Flour Plant) Roller Flour Mill
  • Rice Powder, Puttu and Wheat Powder
  • Biscuits & Candy
  • Rice Mill(Parboiled Rice)
  • Bakery industry, etc.

 

Hydropower Sector

The perennial nature of rivers and the steep gradient of the country's topography provide ideal conditions for the development of hydropower. Most of the power plants are run-of-river type with energy available in excess of the in-country demand during the monsoon season and deficit during the dry season. Nepal has a huge hydropower potential. Nepal's electricity generation is dominated by hydropower, though in the entire scenario of energy use of the country, the electricity is a tiny fraction, only 1% energy need is fulfilled by electricity. The bulk of the energy need is dominated by fuel wood (68%), agricultural waste (15%), animal dung (8%) and imported fossil fuel (8%). The other fact is that only about 40% of Nepal's population has access to electricity. With this scenario and having immense potential of hydropower development, it is important for Nepal to increase its energy dependency on electricity with hydropower development.

Much of the new hydropower capacity in Nepal will be built with a view to export electricity to meet growing demand for electricity in northern India, offsetting greenhouse-gas emissions by reducing the proportion of coal-burning stations in the electricity portfolio.

 

Mine and Mineral Industry

Minerals are the nonrenewable natural resources. Sustainable development of such resources helps to strengthen the national economy. Nepal is an underdeveloped country with vast natural resources such as water, minerals, forest, varieties of agricultural products and medical herbs. For the economic development of the country exploitation and proper use of such valuable resources, especially mineral resources, is extremely important. Small scale historical iron, copper, lead, zinc, cobalt, nickel mines and placer gold panning in the major rivers and many slate, quartzite, dolomite and limestone quarries were operational in many districts. Old working pits, audits, smelting places, scattered slag and remnant of mine materials stand as solid proofs of such mining activities in the past.

Limestone is by far the most important mineral resource in Nepal, followed by magnesite, lead and zinc, and marble. Limestone was mined for the production of cement and lime, as well as for construction materials. The mining sector, comprising numerous small-scale industrial minerals mining companies, was the smallest sector of Nepal’s economy.

All these indicate that Nepal is potential for metallic minerals but most of them are sub-economic to none economic prospect/ deposits.

There may be investment opportunities in:

  • Artificial Marble Tiles
  • Granite (Marble) Polishing Batti (Bar)
  • Granite Marble Cutting and Polishing Unit
  • Calcium Carbonate from Marble Chips
  • Coal Washing Unit
  • Ferro Silicon Manufacturing
  • Gypsum plaster boards
  • Beneficiation of chromium, nickel and manganese ore
  • Integrated production unit of gypsum powder, gypsum board
  • P.V.C. laminated gypsum ceiling tiles, etc.

 

Reasons for buying our reports:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product.

• This report provides vital information on the product like its characteristics and segmentation.

• This report helps you market and place the product correctly by identifying the target customer group of the product.

• This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials.

• The report provides a glimpse of government regulations applicable on the industry.

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

• Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players.

• We use reliable sources of information and databases. And information from such sources is processed by us and included in the report.

 

 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 46 of 295 | Total 2942 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 46 294 295   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Hair Shampoo - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Shampoo is a hair care product used for the removal of oils, dirt, skin particles, dandruff, environmental pollutants and other contaminant particles that gradually build up in hair. The goal is to remove the unwanted build-up without stripping out so much as to make hair unmanageable. Shampoo, when lathered with water, is a surfactant, which, while cleaning the hair and scalp, can remove the natural oils (sebum) which lubricate the hair shaft. Shampooing is frequently followed by conditioners which increase the ease of combing and styling. The hair care market in India is valued at $200 million. It has registered a growth of 3.8% over the previous year. The hair care market can be segmented into hair oils, shampoos, hair colorants & conditioners, and hair gels. The shampoo market is valued at Rs 4.5 billions and has the penetration level of only 13% in India. The market is expected to increase due to increased marketing by players, lower duties, and availability of shampoos in affordable sachets. Sachet makes up to 40% of the total shampoo sale. The Indian shampoo market is divided in two parts 1. Cosmetic 2. Anti-dandruff This is primarily a middle class product because more than 50% of the populations use toilet soaps to wash hair. The penetration level is only 30% in metros. The major players are HUL, and Procter & Gamble. Cost Estimation: Capacity : 500 Ltrs. /Day Plant & Machinery : 13 Lakhs Total Capital Investment : 79 Lakhs Rate of Return : 44% Break Even Point : 44%
Plant capacity: 500 Ltrs. /DayPlant & machinery: 13 Lakhs
Working capital: -T.C.I: 79 Lakhs
Return: 44.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Packaged Drinking Water with Pet Bottles (1 ltr) (Automatic Plant) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Bottled Water means water intended for human consumption and which is sealed in bottles and other containers with no added ingredients except that it may occasionally contain safe anti-microbial agent. Now-a-days safe and pure drinking water is major necessity for human being. Bottled water may be used as an ingredient in beverages (eg. diluted juices, flavoured bottled water). Pet is the most extensively recycled plastic of the present time. Bottled water is available in differently sized packaging from 200 ml (popular on flights) to 500 ml (a huge hit among the youth) to 1 litre and 2 litre. Pepsi, for its part has priced the 1 litre Aquafina pack at Rs. 12/- to cater mass segment while its retail strategy centre on the 1 litre pack, the company has also launched 2 litre and 500 ml pack to suit various consumer requirements. Despite the large no of small producers, this industry is dominated by the big players Parle, Bisleri, Coca-cola, Pepsico, Parle Agro, Mohan Meakins, SKN Breweries bottled water in the country when it introduced besleri in India 25 years ago. Apart from domestic and commercial use of packaged water, the Indian Railways is a huge potential market. According to officials at cherio, the railway ordered 10,000 cases (of 12 bottles each) a day. In coming years the demand of packaged drinking water will be increased very rapidly, so there is a huge scope for new entrepreneurs to venture into this project.
Plant capacity: 32,000 Ltrs/DayPlant & machinery: 221 Lakhs
Working capital: -T.C.I: Cost of Project : 327 Lakhs
Return: 19.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Cattle Breeding & Dairy Farming to Produce Milk

A breed is a group of animals related by descent from common ancictors and visibly similar in most characters. A breed may come about as a result of planned mating or has been more frequently the case, it may be pure happenstance. A dairy is a place for handling milk and milk products. In India dairying has been practiced as a rural cottage industry since the remote past semi commercial dairying started with the establishment of military dairy farms and cooperative milk union through out the country towards the end of the nineteenth century. In a developing country like India which has largest cattle production about 25% of the world bovine population, and the lowest, field of milk, measures to improve the yield of milk are of vital importance in order to increase the milk capacity and the meat production of cattle an ingenious idea of breeding phenomenon was conceived. As of today, breeding is more prominent in rural areas and highly beneficial in terms of milk production, meat production and profitability. Daily per capita of milk consumption in India is 114 gms. Now-a-days there is greater demand of butter, ghee, cheese, skimmed milk, whole milk and other dairy products. India is increasing its foreign exchange by exporting dairy product as well as other processed food. More dairy farms are required to come, so that consumption demand may be fulfilled. There is wide scope for new entrants.
Plant capacity: 500 Ltrs Milk/Day, 66 Breeding Job/DayPlant & machinery: 35 Lakhs
Working capital: -T.C.I: 87 Lakhs
Return: 44.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

STARCH AND ALLIED PRODUCTS FROM MAIZE(Starch, Liquid Glucose, Dextrose Monohydrate, Dextrose Anhydrous, Sorbitol and Vitamin C)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Plant Layout

Starch is a group of polysaccharides, composed of glucopyranose units joined together by-glucosidric linkages. It conforms to the molecular formula, (C6-H10O5)n, where n varies from a few hundred to over one million. Starch is found as the reserve carbohydrate in various parts of plants and is enzymatically broken down to glucose to other carbohydrates according to the metabolic needs of the plants. Industrially, starch is broadly divided into two types viz., natural and modified. Natural starches also designated as unmodified starches or simply starches are obtained from grains such as sorghum. From roots like potato, tapioca and arrowroot, and from the pith of the stems of certain palms such as sago. They are further classified into cereal starches and root starches. The characteristics of the natural starches are changed by chemical or enzymatic action and the products of these reactions are termed modified starches. This group includes dextrin, acid-modified starches, oxidized starches, starch esters, starch ethers, dialdehyde starches, and cationic starches. Starch can be obtained from maize, sorghum, roots and tubers such as tapioca, arrowroot, potato and from the pith of the stems of certain palms such as sago. Physical and chemical properties of starch vary according to the raw material from which it is derived. Starch is a high polymeric carbohydrate with the molecular formula (C6H10O5)n where n varies from a few hundred to over one granules, usually made up of both a linear polymer (amylose) and a branched polymer dissolves in hot water. Starch granules gelatinize in water when the temperature is raised to about 60-700C. At higher temperatures they well progressively to form a paste or solution and the shorter, linear molecules dissolve. The solutions form a gel on cooling depending upon the variety and concentration of starch present. Starch is an absorbent for water. Under normal atmospheric conditions most starches contain 10-17% moisture. Starch and Glucose are reserved carbohydrates of plants and are therefore widely distributed in their crude form. They can be found in almost all fruits, vegetables and corns. There is no definite information as to how they were initially obtained. But different countries are known to be using different agricultural sources for production of starch. While Japan and the European countries produce starch from potatoes, America from corn, countries like Thailand and Brazil are understood to be producing starch mainly from tapioca. In the case of India, starch is being produced from Maize as well as tapioca. While the units producing starch from maize are concentrated in large sector, the units producing starch from tapioca are large concentrated in the small-scale sector. Commercially glucose is produced from starch only and these two products are generally made in the same unit side by side. The history of starch and glucose Industry dates back to early forties before the Second World War starch used to be imported from European countries. But owing to difficulties in importing starch and difficulties in continuing the production of cotton textiles (where starch finds its extensive use in the manufacture of adhesives, sizing and finishing in textiles) two units namely Anil starch products with their factories located at Ahmedabad, in the year 1939 and 1941 respectively. Starch and Glucose can be used in different end use industries such as in the manufacture of adhesives, sizing and finishing in textiles, thickening agents in gravies, custards, and confectioneries. Sizing papers, Cosmetics, explosives, reagent, face powders, indicators in domestic analysis, water soluble packaging films, book bindings fabrics, distilled liquors, malt sugar, cattle feed ingredient, rubber reinforcing resins etc.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

ENERGY / PROTEIN BAR - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Energy bars are often promoted as a quick snack, a supplement athlete/ sports person or those who done workouts energy bars are also an excellent method for replenishing muscle energy store after sport. For best results eat an energy bar 30-45 minutes before a race or workout or eat small amount during in race or ride. Energy bars are convenient in traveling and contain reasonable amount of fat, sodium, saturated fat etc. Many energy bars are good source of high quality of protein without the cholesterol and saturated fat of high animal protein sources. Energy bars are being marketed heavily and multitude of brands are available in supermarkets, drugstore, and health food stores. Major energy bars are G Power Bar, Clif energy bar, Solow Glycemic nutrition bar, Optimum energy bar, Probar, George Delights just fruit bar, parley bar, soy joy nutrition bar etc. Power bar comes in several types, the original, protein plus, power bar harvest (Power harvest). The demand of energy, power bar is increasing day by day, so there is wide scope for new entrepreneurs to venture into this project.
Plant capacity: 120 Lakh Pcs/annumPlant & machinery: 188 Lakhs
Working capital: -T.C.I: Cost of Project : 488 Lakhs
Return: 44.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

BISCUIT MAKING PLANT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Biscuit industry in India in the organized sector produces around 60% of the total production, the balance 40% being contributed by the unorganized bakeries. The industry consists of two large scale manufacturers, around 50 medium scale brands and small scale units ranging up to 2500 units in the country, as at 2000-01. The unorganized sector is estimated to have approximately 30,000 small & tiny bakeries across the country. Biscuit can he broadly categorized into the following segments: Glucose 44% Marie 13% Cream 10% Crackers 13% Milk 12% Others 8%. Though India is considered as the third largest producer of Biscuits after USA and China, the per capita consumption of biscuits in our country is only 2.1 Kg., compared to more than 10 kg in the USA, UK and West European countries and above 4.25 kg in south cast Asian countries, Le. Singapore, Hong Kong, Thailand, Indonesia etc. China has a per capita consumption of 1.90 kg, while in the case of Japan it is estimated at 7.5 kg. Biscuits are manufactured from wheat flour, sugar, baking powder, condensed milk, Ghee, salt, millet, jelly, dry fruits. Various essences are added according to the taste selected. Biscuits are manufactured through baking process. There is total average growth rate of biscuit industry is 7-9%. It can be concluded that there is wide scope for new entrepreneurs if he can produce good quality product.
Plant capacity: 30 MT/DayPlant & machinery: 834 Lakhs
Working capital: -T.C.I: Cost of Project : 1440 Lakhs
Return: 45.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

COMPRESSED BIOGAS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The term biogases refer to gases created by the anaerobic fermentation of biological materials. Their main constituents are methane and carbon dioxide. Considerable quantities of biogases are produced by anaerobic fermentation of agricultural and organic waste (biogas), sludge digestion in the tanks of sewage treatment plants (sewage gas) and organic residues in garbage tips (land fill gas). Biogas can be utilized for electricity production, cooking, space heating and process heating. If compressed, it can replace compressed natural gas for use in vehicles, where it can fuel cell. Compressed bio-gas is becoming widely used in Sweden, Switzerland and Germany. A bio-gas powered train has been in service in Sweden. In India also compressed biogas is used in bus and car to save environment from pollution. The demand of compressed bio-gas is increasing very rapidly, so there is wide scope for new entrepreneurs to venture into this project.
Plant capacity: 1200 MT/AnnumPlant & machinery: 204 Lakhs
Working capital: -T.C.I: Cost of Project : 447 Lakhs
Return: 43.00%Break even: 33.00%
Add to Inquiry Add to Inquiry Basket

Premixed Tea and Coffee with Sugar and Milk Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunies

Coffee and tea are important in any office. Working professionals feel the need for these beverages intermittently during their hectic schedule. Increasing labor costs and the need for instant availability have brought in vending machines. With this in mind, many companies have installed beverage vending machines to provide their employees refreshments. Rapid urbanization is resulting in a lifestyle that is enhancing the time spent Out of Home working (in offices and institutions), waiting (in railway stations, airports, bus terminals) or playing (in malls, theaters, parks, beaches etc.). Many Indians therefore are beginning to consume their daily requirements of refreshments outside of their homes. In this case there is a great need for a convenient, safe and consistent product delivery mechanism for tea and coffee that account for more than 70% of the demand for beverages refreshment out of home. This is the role that is being currently performed by the vending pre-mix suppliers. Vending pre-mixes are a mixture of Tea/coffee, Sugar and dairy whiteners that are mixed with heated water through a machine at the point of dispensing to provide consumers with a safe and hygienic product untouched by human hands. The demand of premix tea and coffee will increase very rapidly so there will be wide scope for new entrepreneurs to venture into this project
Plant capacity: 1 M.T/Day Premixed Tea, 1 M.T/Day Premixed CoffeePlant & machinery: 31 Lakhs
Working capital: -T.C.I: Cost Of Project: 82 Lakhs
Return: 42.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

GOOD FUTURE PROSPECTS FOR ENERGY/PROTEIN BAR PROJECT - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Production Schedule

GOOD FUTURE PROSPECTS FOR ENERGY/PROTEIN BAR Good nutrition practices help to fuel physical activity, in addition to sustaining normal bodily functions and the growth, development and repair of human body tissue. For those serious about their sport or exercise it is a well-accepted concept that diet can significantly affect performance. In order to achieve the quality of your training and maximize adaptations, it is essential that you consume a diet that matches the demands placed upon the body. They are often promoted as a quick snack, a meal replacement, or a supplement for your workout. Energy bars are also an excellent method of replenishing muscle energy stores after sport. For best results eat an energy bar 30-45 minutes before a race or workout or eat small amounts during your race or ride. Energy bars are being marketed heavily and a multitude of brands are available in supermarkets, drug stores, and health food stores. Energy bars are convenient, travel well, and contains reasonable amounts of fat, saturated fat, and sodium. Many are a good source of high quality protein without the cholesterol and saturated fat of high fat animal protein sources. Energy bars are easy to bring along with you and will not melt if they are exposed to heat all day. Energy bars have been part of the outdoor scene since the Crusades in the Middle Ages-and possibly before. Crusaders tucked an energy bar called the pan forte (a mix of flour, honey, shortening, nuts, and dried fruit) into their tunics to give a lift during long marches. However nutrition experts suggest no more than two to four per day for a moderate level of activity, supplementing a diet consisting largely of whole foods, whose complex blends of vitamins and nutrients cannot be duplicated in processed foods. Energy bars: a dietary supplement? US Congress defined the term "dietary supplement" in the Dietary Supplement Health and Education Act (DSHEA) of 1994. A dietary supplement is a product taken by mouth that contains a "dietary ingredient" intended to supplement the diet. The "dietary ingredients" in these products may include: vitamins, minerals, herbs or other botanicals, amino acids, and substances such as enzymes, organ tissues, glandular, and metabolites. Dietary supplements can also be extracts or concentrates, and may be found in many forms such as tablets, capsules, soft gels, gel caps, liquids, or powders. They can also be in other forms, such as a bar, but if they are, information on their label must not represent the product as a conventional food or a sole item of a meal or diet. Whatever their form may be, DSHEA places dietary supplements in a special category under the general umbrella of "foods," not drugs, and requires that every supplement be labeled a dietary supplement. The "new dietary ingredient" in a dietary supplement? The Dietary Supplement Health and Education Act (DSHEA) of 1994 defined both of the terms "dietary ingredient" and "new dietary ingredient" as components of dietary supplements. In order for an ingredient of a dietary supplement to be a "dietary ingredient," it must be one or any combination of the substances like : ● A vitamin, ● A mineral, ● A herb or other botanical, ● An amino acid, ● A dietary substance for use by man to supplement the diet by increasing the total dietary intake (e.g., enzymes or tissues from organs or glands), or A concentrate, metabolite, constituent or extract.. NEW PROTEIN BARS JUST FOR WOMEN Gone are the days when women skip meals or starve themselves for effective weight loss. The modern woman is fully aware that smaller, more frequent meals that are higher in protein are essential but need a convenient way to snack easily and nutritiously. New to the market are ISO femme High Protein Energy Bars! These bars are part of the Body Transformation System and part of the popular femme line from ALL MAX Nutrition, which includes Rapid cuts femme and ISO femme High Protein Smoothies. These conveniently small, Triple Layer Protein bars for women taste absolutely delicious! Each bar is only 160 calories, just 1 g of sugar and 14 grams of protein in an ooey gooey chocolate coating. The bars are a great-tasting and easy way to satisfy your hunger cravings without sacrificing your diet.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

IMFL Bottling Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

-
Plant capacity: 10000 Bottles/DayPlant & machinery: Rs. 36 Lakhs
Working capital: -T.C.I: Rs. 312 Lakhs
Return: 49.00%Break even: 27.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 46 of 295 | Total 2942 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 46 294 295   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top