Google Search

Search

Already a Member ?

Best Business Opportunities in Namibia, Africa - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 2 of 48 | Total 479 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 47 48   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Packaged Drinking Water - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Potable spring waters containing, sulphur iron, magnesium and other mineral salts occurring in certain regions are claimed to be beneficial to human metabolism. They occur in specific and widely scattered locations best known of which are white sulphur springs (Virginia) Hot Springs (Arkansas), Saragoga Springs (New York) Vichy (France Baden (Germany) and U.S.S.R. The therapitic value of such waters is questionable carbonated mineral waters also contain lithium salts. Water Supplies and Their Impurities Natural fresh water supplies are derived indirectly from the oceans; clouds form by solar evaporation and the winds move the moisture overland to precipitation as rain, snow or hail. The water flows over the surface or percolates into the ground excess water flows back to the oceans completing the hydrological cycle. Water supplies are classified as surface supplies and underground waters. Surfaces waters are rivers; lakes, creeks, ponds, and reservoirs, wells and springs are the sources of underground water. Water vapour in clouds is generally pure but gathers dust and gases when it reaches the earth suspended organic matter and soil turbidity is picked up. Minerals are leached from the soil and rocks and organic matter is added from municipal and industrial wastes and decaying vegetation. Well waters usually are free of suspended materials and organic matter due to filtration through the earth. Surface waters are generally low in mineral content but relatively high in suspended and organic materials. Water treatment chemistry and processes deal with the chemical or physical reactions of small amounts of dissolved or suspended materials. The unit of measurement commonly used is parts/million ppm. Which is equivalent to milligrams per liter. Thus, a surface water containing 200 ppm dissolved follows that water analysis and treatment processes are based upon specialized techniques designed from the determination and removal of trace quantities of materials. Water Analysis The importance of an accurate and complete water analysis cannot be over emphasized. All water treatment process is affected by variation in the dissolved and suspended impurities in the supply. Deep well waters generally have fairly constant impurity levels. Surface waters from rivers vary widely in mineral and turbidity levels. Most water laboratories state the impurity levels as cat ions and anions in terms of calcium carbonate equivalents, or CaCO3 Calcium carbonate is used as the common denominator it has a molecular weight of 100, which facilitates calculations. In this ionic analysis method, total cat ions equal to anions, which simplifies pre-diction of the water analysis after various treatment methods. New analytical methods and instruments to have made water treatment processes possible mineral content of waters is determined in many cases on a continuous basis by means of colour imetering conductivity, and automatic adsorption, organic matter is usually determined by oxidation method and reported as chemical oxygen demand oxygen consumed or total organic carbon obtained in the united states. Important sources are the U.S. geological survey water surveys. Water analysis methods are reviewed annually by Analytical chemistry published, by the American Chemical society. Harmful Effects of Water Impurities The first Critertion of any water supply for human use is that it must be safe to drink. Fortunately all harmful bacteria are killed rapidly and inexpensively by means of chlorinations. This method is universally used in the United States and most of the world. Chlorine gas is usually employed but sodium hypochlorite is used occasionally for smaller installations. Most surface supplies must be chlorinated. Deep well water is generally safe for drinking purposes, but most municipalities chlorinate these supplies to guard against surface contamination. Use of mineral water gradually increase in India due so shortage of pure hygienic water and also increase the knowledge of water because pathogenic micro organisms which are main reason of stomach problem and cause of acetate deseats formation. On this reasons a parh of the society stored so use safe drinking water i/e mineral water. There is increase full life, major of the working group has to take travel from one place to another place, by this time they are how habituate to use mineral water. Due to growth of tourism industry in our country by 8% even some peak season they are coming18% more than the last year. Most of the tourist is only habituated to take safe drinking waters. Packed bottled mineral water is the only main resources in our country to safe drinking water. There is chance of acute, shortage of drinking water due to low under ground water level from the part. Hence in future there is much more scope of contamination and polluted water. For getting safe drinking water mineral water bottle will be the safest one. On that base it can be concluded that scope of mineral water will be much more increased in the future. Growing Prospects for Tourism Industry: Tourism is gaining increasing importance these days. The liberalization has given boost to this industry. The private sector entry in transports has also been advantageous to this sector. Entry of private sector, into many other industrial areas, entry of multinationals, NRI business house in wake of liberation is likely to result in big boost in business travel. International media coverage, increasing awareness about travel, even among laymen and holiday are now really developing. Government has announced national action plan for tourism in May, 1992 to boost tourist arrivals and foreign exchange earnings. India, with its historical, natural and cultural background is a favorite place for tourists from all over the world. In light of this, an attempt is made to study the growing prospects of investment in tourism industry. Tourism can mainly be classified into business of travel and holiday. As an industry, it broadly covers hotels, travel agencies and various transport services. Therefore the industry is hearing dependent on vital infrastructure like rail and road route, communication, etc. Tourist Arrivals in India:- The tourist comes in India from all over the world. However, the highest number comes from U.K., U.S.A. and Germany. It is well known that lack of adequate infrastructure is the primary constraint in achieving the full potentials. India is a long haul destination for most tourists because the generating markets that India primarily depends on are far away. Therefore, to attract more people to come to India, the overall welcome and the incentives will have to be better than those offered by competition destinations. A number of small things, which add up to making a place an attractive destination, will have to be looked into. First is the issue of making access to India easy. The visa formalities should be simplified and computerized for easy verification. Tourists, who have so many competing options, will be attracted to places to which communication is easy and inexpensive. Most of the countries, which have made rapid progress in tourism in recent time, are distinguished by easy availability of air seat capacity, modern and efficient air transport handling facilities and free access by charter flights. These are areas, which need urgent attention in India. The de facto capacity now available may be less than the desirable level in view of the increasing number of Indians traveling abroad and ease of access to our competing neighboring countries in Southeast Asia. Similarly, internal connectivity to important places of tourist attraction has not always been optimal. Khajuraho languished for years because of this deficiency, so did Ladakh. India is a large country with huge population. The spread of industrial growth and trade make involved people to go from place to place. The numbers of people moving for relaxation sight-sight-seeing and religious pilgrims have increased sizably. Precise data on them are not available. However, data on air and rail traffic indicate mobility of people within the country. India has traditionally been viewed as a market for cultural tourism, with visits to ancient seats of culture. The tourism department has now hit the idea of diversifying the form of tourism especially in view of the diversity of resources available in the country. This great emphasis is being laid on leisure and holiday tourism winter and water skiing, adventure tourism and sports. The diversification programme includes development of beach resorts, organizing trekking, mountaineering, sking, water sports, wildlife sanctuary visits and since recently river rafting. The Himalayas which is a unique tourism resource is being tapped for organizing trekking trips for young visitors. Besides water sports are also being promoted in certain locations. It has been found the no-package tourists spent major part of their tour budget on accommodation and food and about 25 percent on shopping. However package tourists spent nearly 65 of their budget on shopping. The most substantive benefit of tourist inflow is the foreign exchange earned by the country. Over the years the exchange earning from tourism has gone up steadily and now is equal to the earnings of some major categories of merchandise exports.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Packaged Drinking Water - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bisleri, which pioneered the packaged drinking water business in India, catering to consumers need to have hygienic drinking water while on the move or even at home, is literally changing its colours and going for a makeover. The brand that was till now marketed as packaged drinking water will now be available in a natural avatar. The natural water segment, which accounts for about 5% of the total bottled water segment, is expected to grow by leaps and founds as health awareness and disposable incomes rise. The bottled water industry is worth Rs. 1,000 crore in India and is growing at 40% per annum. It is projected to reach Rs. 5,000 crore by 2010. At present Himalaya leads the segment with a 50% market share. Any entrepreneur may go into this field, will be successful.
Plant capacity: 30,000 Thousand Nos./Annum or 1,00,000 Bottles /dayPlant & machinery: Rs. 105 Lakhs
Working capital: -T.C.I: Cost of Project Rs. 282 Lakhs
Return: 44.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

WOODEN DOORS AND FRAMES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Carpentry and joinery are common terms used with any class of work with wood. Strictly speaking carpentry deals with all works of a carpentry such as roofs, floors, partitions, etc. of a building, while joinery deals with the making of doors, windows, cupboards, dressers, stairs and all interior fitments for a building. Wooden door and frames are the back bone of the construction industries, starting from building construction, Official building, Educational Institution, Hospitals, Nursing Homes, Factories etc. The demand of the product is increasing day by day due to increase in construction activities in India. Thus, to cope up with the out growing demand of the product, the imperative need of the hour is to setup more number of with for the manufacture of wooden window and frames. Therefore, in the limelight if the fact enumerated above, a new entrepreneur can well venture into this field.
Plant capacity: 80 Pcs./dayPlant & machinery: 10 Lakhs
Working capital: -T.C.I: 93 Lakhs
Return: 50.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

MATCHBOX - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Matchbox is one of the most important items. Though it is looked upon as small and insignificant, earlier it was a big problem. In the 17th century, people used phosphorous and sulfur together using flints or sticks of woods. It was then found in the 19th century that using non-provisions red phosphorous on the match head instead of white phosphorus. The raw materials required for the manufacture of matches are timber paper, flour paste or glue, and chemicals of which amorphous phosphorus and potassium chlorate are the most important. Due to the widespread use of cigar, bidi, Cigarettes and domestic uses, there are huge demand of match boxes. A new entrepreneur can well venture into this field,because it has good future scope.
Plant capacity: 50000 Nos. /DayPlant & machinery: Rs. 5 Lakhs
Working capital: -T.C.I: Rs. 29 Lakhs
Return: 46.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Detergent cake, Powder and Dish washing Detergent cake and Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Soaps are the earliest form of detergents. Though at present the term detergent is used for synthetic detergent derived from petroleum products. The origin of soap making is unknown. The pheonicians were acquainted with it by at least 600 BC & it was known the gauls not letter than about 300 B.C. These chemical compounds are used for human comfort, cleanliness, and for industrial surface active applications. The success of any cleaning agent is to supply compounds with hydrophobic and hydrophilic groups which will also appreciably decrease surface tension and increase mettability. Synthetic detergents are organic chemicals which promote better surface tension lowering than soaps. Where the use of detergents increases to the point of creating problems in municipal sewerage plants due to excessive foaming and inability to reduce the organic content of the sewage effluent, biodegradation of detergent compounds becomes an important factor, in the U.S., detergent compounds, which can be oxidized to simple end-products, are known as biologically soft syndets and are preferred in detergent compounding. Two of the most prominent detergents in use today. Firstly sulfated fatty alcohols, and secondly is alkyl –Aryl sulfonates. The detergent bar for dish washing is of universal type and can be employed for cleaning of aluminium brass and stainless steel utensils, crockery etc. The product is a very common item in every house from lowest to highest class, detergent cake and detergent powder largely used in the domestic houses, commercial sectors, hotel industries, garments industries and in many other sections of the society. There is high price, medium price and low priced detergent available. India has the 2nd largest market in the world after the U.S. of the market is growing at the rate 10% annually. So we can say that there is good scope for new entrants.
Plant capacity: Detergent Cake, Powder, Dish washing Cake & Powder Each 1 MT/Day = 4 MT/DayPlant & machinery: 28 Lakh
Working capital: -T.C.I: 239 Lakh
Return: 47.00%Break even: 37.00%
Add to Inquiry Add to Inquiry Basket

Growing Prospects for Packaged Drinking Water Industry - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Cost of Project

Water everywhere, not a CLEAN drop to drink! Who would have thought that there will be a day when sanitation of available water would be more of a concern than availability of water itself? Hygiene is of great concern to everyone today, and this is evident with the surging rise in the consumption of packaged/bottled water. India has 16 percent of the world's population, 2.5 percent of the land mass and 4 percent of the world's water resources. These limited water resources are depleting rapidly while the demands on them are increasing. Drinking water supplies in many parts of India are intermittent. Transmission and distribution networks for water are generally old and badly maintained, and as a result, are deteriorating. India is one of the biggest and most attractive water markets in the world. The boom time for Indian bottled water industry is to continue- more so because the economics are sound, the bottom line is fat and the Indian government hardly cares for what happens to the nation's water resources. Corporate control over water and water distribution in India is growing rapidly: the packaged water business is worth $250 million, and it's growing at a huge 40-50% annually. Around 1,200 bottling plants and 100 brands of packaged water across the country are battling over the market, overdrawing groundwater, and robbing local communities of their water resources and livelihoods. Most multinational (MNC) companies view India as the next big market with a lot of potential and growth possibility. Several MNCs are waiting in the wings to expand a $ 287 billion global water market into India. There is a huge market being exploited by the packaged water industry, and it's growing at 40% per annum. With over a thousand bottled water producers, the Indian bottled water industry is big by even international standards. There are more than 200 brands, nearly 80 per cent of which are local. Most of the small-scale producers sell non-branded products and serve small markets. In fact, making bottled water is today a cottage industry in the country. There is investment worthy mid-cap companies in this segment. From being confined to the uppermost echelons of society, packaged water has now become a commonplace commodity and almost a necessity in metros. After witnessing historic growth in recent years, it has become a Rs 3,000-crore industry, one that is slated to only post healthy growth rates to become a Rs 10,000-crore business in just three years, The bulk water industry, or water in 12-, 20- and 25-litre packages, has also witnessed a parallel growth of Rs 700-1,000 crore. Basically, the market can be divided into two segments — the retail consumer market where the pack sizes are 500 ml, one litre, 1.2/1.5/2-litre and five-litre, and the household and institutional market, where the pack size is usually are 20- or 25-litre. The Bureau of Indian Standards (BIS) is the governing authority on all quality and production regulations related to natural mineral water as well as packaged drinking water. The all-India market for packaged water is between $145 million (Rs. 8 billion) and $21 million (Rs. 10 billion) and is growing at the rate of nearly 40 per cent per annum. Even though it accounts for only 5 percent of the total beverage market in India, branded bottled water is the fastest growing industry in the beverage sector. While the single largest share in the mineral water market might still belong to an Indian brand -- Parle's $52 million (Rs. 2.5 billion) Bisleri brand has a 40 percent share -- multinational corporations are not far behind. Nestle and Danone are vying to purchase Bisleri, and Pepsi's Aquafina and Coke's Kinley brands have been extremely successful in edging out many of the small and medium players to buy-outs and exclusive licensing deals. In less than two years since its launch, Aquafina has cornered 11 percent of the market and Kinley has almost a third of the market. News reports indicate that other MNCs like Unilever are also eying the market. DEMAND OF WATER WOULD NEVER GO DOWN & WATER WOULD NEVER BE OUT OF BUSINESS
Plant capacity: 30,000 Thousand Nos./Annum or 1,00,000 Bottles /dayPlant & machinery: Rs. 105 Lakhs
Working capital: -T.C.I: Cost of Project : Rs. 282 Lakhs
Return: 44.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Packaged Drinking Water & Pet Bottle - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

-
Plant capacity: 7000 Ltrs Packaged Drinking/day, 7000 Nos. Pet Bottles/dayPlant & machinery: Rs. 60 Lakhs
Working capital: -T.C.I: Rs. 135 Lakhs
Return: 42.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Packaged Drinking Water with Pet Glasses (250 ml) (Automatic Plant)- Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Almost a decade ago, the introduction of bottled water or packaged water has changed the traditional of serving and consuming drinking water. According to the estimate of WHO, 80% of all diseases approximately 25 millions death per year in the developing countries are caused by contaminated water. While bottled water is widely available in both industrialized and developing countries, it may represent a significant cost to consumer. Consumers may has various reasons for purchasing packaged drinking water, such as taste, convenience but for consumers, safety and potential health benefits are important considerations. The disposable pet glass is made of clear poly-ethylene terepthlate, which is commonly referred to pet. The 250 ml disposable glass is filled with water and sealed with aluminium foil. The disposable pet glass has ridges for both strength and esthetics. A smooth area is where the label goes and is indented at that section to make it easier to grip. In India the market for packaged water is estimated to be between Rs. 8 billions and 10 billion and is growing at the rate of nearly 40% per annum. Even though it accounts for only 5% of total beverage market in India, branded packaged water is fastest growing industry in the beverage sector. So there is a huge scope for new entrepreneurs to venture into this project.
Plant capacity: 128000 Packs/DayPlant & machinery: 219 Lakhs
Working capital: -T.C.I: Cost of Project : 323 Lakhs
Return: 20.00%Break even: 59.00%
Add to Inquiry Add to Inquiry Basket

Packaged Drinking Water with Pet Bottles (1 ltr) (Automatic Plant) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study

Bottled Water means water intended for human consumption and which is sealed in bottles and other containers with no added ingredients except that it may occasionally contain safe anti-microbial agent. Now-a-days safe and pure drinking water is major necessity for human being. Bottled water may be used as an ingredient in beverages (eg. diluted juices, flavoured bottled water). Pet is the most extensively recycled plastic of the present time. Bottled water is available in differently sized packaging from 200 ml (popular on flights) to 500 ml (a huge hit among the youth) to 1 litre and 2 litre. Pepsi, for its part has priced the 1 litre Aquafina pack at Rs. 12/- to cater mass segment while its retail strategy centre on the 1 litre pack, the company has also launched 2 litre and 500 ml pack to suit various consumer requirements. Despite the large no of small producers, this industry is dominated by the big players Parle, Bisleri, Coca-cola, Pepsico, Parle Agro, Mohan Meakins, SKN Breweries bottled water in the country when it introduced besleri in India 25 years ago. Apart from domestic and commercial use of packaged water, the Indian Railways is a huge potential market. According to officials at cherio, the railway ordered 10,000 cases (of 12 bottles each) a day. In coming years the demand of packaged drinking water will be increased very rapidly, so there is a huge scope for new entrepreneurs to venture into this project.
Plant capacity: 32,000 Ltrs/DayPlant & machinery: 221 Lakhs
Working capital: -T.C.I: Cost of Project : 327 Lakhs
Return: 19.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

E-Waste Recycling plant (Electronic waste, e-waste, e-scrap, or Waste Electrical and Electronic Equipment (WEEE)) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process

E-waste is a popular informal name for electronic product nearing the end of their useful life. Computers, televisions, VCR, stereos, copier, and fax machine are common electronic product .Many of these product can be reused, refurbished and recycled. Electronic waste is only a subset of wee (waste electrical and electronic equipment). Electronic appliances are composed of hundreds of different materials that can be both toxic but also of high value. Gold, silver, copper, platinum etc. are valuable materials which recyclers recover from e-waste. In India, e-waste is mostly generated in large cities like Delhi, Mumbai and Bangalore. In these cities a complex e-waste handling structure has developed mainly based on a long tradition of waste recycling . Currently, a few players like Sims Recycling, Ecoreco and E-Parisara, located in Chennai, Mumbai and Bangalore respectively are operational in the organized sector. These shred e-waste in very small quantities and export the pulverized e-waste for precious metal recovery in smelting refineries abroad. The boom in IT industry has a negative concern as well as: e-waste. It is a major concern for the Ministry of Environment and Forest . The scope for e-waste recycling project is very good. New entrepreneurs venturing into this field will be successful
Plant capacity: Monitor -10 Pcs/Day, Plastic Dana “ 5.33 M.T/Day,Copper Wire Scrap-9 Kg/day, Glass Scrap from C.R.T-270 Kg/Day, Other Metals-800 Kg/Day Plant & machinery: 51 Lakhs
Working capital: -T.C.I: 196 Lakhs
Return: 47.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 2 of 48 | Total 479 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 47 48   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top