Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 17 of 248 | Total 2480 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 247 248   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Rigid Polyvinyl Chloride(RPVC) Pipes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

PVC pipes are made out of a material known as polyvinyl chloride, a durable, strong plastic-like substance. Pipes are constructed from this material and used in various applications from plumbing to construction. The pipe is designed to be universal. All pipes are designed around specific requirements to ensure that multiple pipe sections will fit together. The ends of the pipe can either be smooth or grooved (similar to a screw). Additionally, there are several different pipe sizes ranging from very small (one-fourth inch) to very large. Currently, PVC piping counts for the majority of plumbing in the U.S. and is the preferred standard for new construction. Rigid PVC Pipes are fast replacing the conventional metal pipes in many applications. Use of PVC pipes as electrical conduits is well accepted in household and industrial activities. PVC conduits have been accepted by all Electricity Boards. PVC pipes of different diameters have gained wider acceptance for water supply. Their light weight, low cost, easy installation, non corrosiveness, high tensile strength to withstand high fluid pressure make them ideal for number of purposes. They also offer resistance to most of the chemicals and have excellent electrical and heat insulation properties. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Aravali (India) Ltd. • Assam Roofing Ltd. • Kisan Extrusions Ltd. • Narmada Macplast Drip Irrigation Systems Ltd. • Prakash Industries Ltd. • Prime Petro Products Ltd. • Raj Irrigation Pipes & Fittings Ltd. • S R P L Ltd. • Sudhakar Polymers Ltd. • Vishal Pipes Ltd.
Plant capacity: Rigid Polyvinyl Chloride (RPVC) Pipes : 4.8 MT/DayPlant & machinery: Rs 85 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 292 Lakhs
Return: 25.22%Break even: 66.90%
Add to Inquiry Add to Inquiry Basket

Ayurvedic Churna & Tablets - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Ayurvedic medicine is a traditional type of medicine. It is now being recognized all over the world as one of the best type of medicine. It was ingredients derived from nature in palatable condition. It has sub-types of medicines like likable (Lehya), Tablets (Bori), Liquid (Peya), Extracts (Ariata), powder (Churna), etc. here Liquid & Powder for us of Ayurvedic medicines are envisaged for production. Though the specifications of such Ayurvedic medicines are as per Ayurved, now -a-days some practices of Indian pharmacopoca and good-Manufacturing Practice of Medicine manufacturing are applied to Ayurvedic medicine as well. Medicinal plants offer alternative remedies with tremendous opportunities to generate income, employment and foreign exchange for developing countries. Many traditional healing herbs and their parts have been shown to have medicinal value and can be used to prevent, alleviate or cure several human diseases. India is one of the leading countries in Asia in terms of the wealth of traditional knowledge systems related to herbal medicine and employs a large number of plant species which includes Ayurveda (2000 species), Siddha (1121 species), Unani (751 species) and Tibetan (337 species). In India, the use of various herbs in daily diet for prevention and treatment is well known for ages. Cultural beliefs, experiences and availability of various herbs in India has made herbal preparations a part of Indian daily food supplements. The use of functional foods and nutraceuticals can be traced back to ancient Indian system of medicine. Ayurveda , a 5000 year old medical science. The classic texts of Ayurveda are full of references of the effects of food in various health conditions. Ayurveda clearly defines the use of food products for improving quality of life and general rejuvenation. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Ajanta Pharma Ltd. • Arya Vaidya Pharmacy (Coimbatore) Ltd. • Ayurvedic Pharmaceutical Co. Ltd. • Ayurvedshri Herbals Ltd. • Dabur India Ltd. • Emami Ltd. • Indian Medicines Pharmaceuticals Corp. Ltd. • Kerala Ayurveda Ltd. • Lotus Herbals Pvt. Ltd. • Nagarjuna Herbal Concentrates Ltd. • Panjon Ltd. • Rajasthan Drugs & Pharmaceuticals Ltd. • Rasraj Ayurvedic (India) Ltd. • Shree Dhootapapeshwar Ltd. • Sitaram Ayurveda Pharmacy Ltd. • Source Natural Foods & Herbal Supplements Ltd. • Surya Herbal Ltd. • Zandu Realty Ltd.
Plant capacity: Gastritis Sugar Coated Tablets :1000 Bottles/Day •Liver Tablets :1000 Bottles/Day •Panchsakara Churna:2000 Bottles/DayPlant & machinery: Rs 91 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 354 Lakhs
Return: 30.83%Break even: 44.75%
Add to Inquiry Add to Inquiry Basket

Particle Board (Wood Base) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Particle Boards are a relatively new type of engineered wood product that are made from gluing together small chips and saw-dust and firmly pressing them together to make boards or sheet with particle board furniture becoming more commonly available in the market. Particle boards are engineered wood products that are made from very small particles of wood (such as sawdust and small wood flakes). These wood particles are often the by-products that are obtained while making other types of wood such as plywood or blackboards, and hence particle boards are very cost-effective to make. The main advantage of particle board over solid wood or plywood is that its cost is very low. Compared to plywood furniture of similar dimensions, particle board furniture costs less than half. This low cost of course comes at a price, because particle boards are not as durable as plywood or solid wood. Particle boards are much cheaper compared to solid wood, as also cheaper than all the other kinds of engineered woods such as plywood, block boards, MDF (medium density fibre-boards) and HDF (high density fibre-boards). Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Archidply Industries Ltd. • Bajaj Eco-Tec Products Ltd. • Bajaj Hindusthan Sugar Ltd. • Century Plyboards (India) Ltd. • Ecoboard Industries Ltd. • Feroke Boards Ltd. • Genus Paper Products Ltd. • Kitply Industries Ltd. • Madras Chipboard Ltd. • N C L Industries Ltd. • Rushil Decor Ltd. • Shirdi Industries Ltd. • Western India Plywoods Ltd.
Plant capacity: Particle Board (Wood Based) 56652 Sq Ft/DayPlant & machinery: Rs 1521 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2501 Lakhs
Return: 28.11%Break even: 54.19%
Add to Inquiry Add to Inquiry Basket

Fusion Bonded Epoxy Coating of Rebars - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Fusion bonded epoxies are one part, heat curable, thermosetting epoxy utilized for corrosion protection. FBEs are applied to heated parts in a powder form that rapidly gels from liquid to a solid and have remarkable adhesion to the steel surface. FBEs are also are very resilient coatings that resist damage during handling. FBEs are environmentally friendly and contain no volatile organic compounds (VOCs). Fusion bonded epoxy coating, commonly referred as FBE coating is widely used to protect concrete reinforcing rebars, steel pipes, piping connections, etc used in construction. FBE coatings are in the form of dry powder at normal atmospheric temperature. FBE coating is a robust single-layer coating, applied by using electrostatic spray guns, and which provides excellent adhesion, flexibility and a marked resistance to cathodic disbandment – even at elevated pipeline temperatures. The powder when applied electrostatically on to the surface cleaned, hot steel bars, that it fuses, melts, flows and cures to an adherent continuous chemically cross-linked protective film. FBE coating is an industry standard, environmentally-safe thermoset polymer coating which is used as corrosion protection for pipe. Fusion bond epoxy coating, also known as powder coating or FBE coating, is an epoxy-based powder coating widely used to protect steel pipe used in pipeline construction, piping connections and valves from corrosion. They come under the category of 'protective coatings' in paints and coating nomenclature. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Anil Special Steel Inds. Ltd. • Electrosteel Castings Ltd. • Jindal (India) Ltd. • Kamachi Sponge & Power Corpn. Ltd. • Kohinoor Steel Pvt. Ltd. • M S P Steel & Power Ltd. • Maharashtra Seamless Ltd. • Man Industries (India) Ltd. • Mangal Steel Enterprises Ltd. • Mittal Corp Ltd. • Mohan Steels Ltd. • P L G Power Ltd. • P S L Ltd. • Premier Ispat Ltd. • R K K R Steels Pvt. Ltd. • Ratnamani Metals & Tubes Ltd. • Surana Industries Ltd. • Vinayaga Infra (India) Ltd. • Vinayak Steels Ltd. • Welspun Steel Ltd.
Plant capacity: Fusion Bonded Epoxy Coated Rebars 333 MT/DayPlant & machinery: Rs 680 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 2125 Lakhs
Return: 29.17%Break even: 58.80%
Add to Inquiry Add to Inquiry Basket

Wooden Pencils - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economic

A pencil is lead material enclosed in wood or put in metal holder used for drawing or writing. Pencil is a valuable item used by all levels of schools and in all business and government organization. Pencils are made from soft wood and lead. As everybody knows pencils are basic instruments for learning and for many types of office work such as writing, sketching, calculating. Pencil is an item of use almost in every household, office, school, college etc. for writing on paper, making sketches, drawing and such other purposes. Depending on the type of carbon used in them, pencils are categorized as soft medium and hard. Due to smooth and easy handling of pencils it has got a wide application in various fields like copying, sketching, writing etc. Colored pencils are much popular in drawing and paintings. Important factors for the popularity of the pencils are:-Considerable life ,Can be erased , Smooth in copying , Less wear and tear , Availability in almost all the colors. Pencils are used by artists, Engineers, Students of drawing, writing notes, rough works etc. pencils with sticks of different colors are showing a positive demand over ball pen, because of its long durability and economic in price. Day by-day writing papers are becoming dearer. Rough work by ball pen leads in user a wastage of paper whereas due to the unique erasable property of the pencil-writing by rubber, the user can use the same paper several times for rough work and thus can save the excess expenditure over paper. Looking into the need and economic use of the people manufacturing of this graphite lead stick of various grades could user a new horizon to the entrepreneurs. Few Indian Major Players are as under • Add Pens Pvt. Ltd. • Excella Pencils Ltd. • Hindustan Pencils Pvt. Ltd. • Kokuyo Camlin Ltd. • Model Sales Agency Ltd. • Sanghvi Woods Ltd. • Triveni Pencils Ltd.
Plant capacity: Wooden Pencils 200 Gross/DayPlant & machinery: Rs 31 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 55 Lakhs
Return: 24.60%Break even: 71.87%
Add to Inquiry Add to Inquiry Basket

Masala Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, bulb) of plants used as a flavoring or seasoning, although many can also be used as a herbal medicine. A closely related term, ‘herb’, is used to distinguish plant parts finding the same uses but derived from leafy or soft flowering parts. The two terms may be used for the same plants in which the fresh leaves are used as herbs, while other dried parts are used as spices, e.g. coriander, dill. Spices are no longer regarded as wonders of medicine, but they still play an important part in the manufacture of many cosmetics and perfumes and are grown commercially for their coloring and preservative properties. Nutmeg and mace are no longer the main crops of the Moluccas, but instead are grown on a large scale on the West Indian island of Grenada. Cloves, however, still come from Madagascar and Zanzibar-names that are still evocative and romantic and hint strongly of spices. Spices can be aromatic or pungent in flavors and peppery or slightly bitter in taste. In order to keep their fragrance and flavor intact, they are generally added in the cooking recipes at the last moments since, prolonged cooking results in evaporation of essential oils. Spices are being used in the preparation of season soups, barbecue sauces, pickling and as a main ingredient in a variety of curry powders.Spices along with some seasonal herbs are being used to enhance the flavor and taste of vegetable, chicken, fish and meat dishes. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • A V T Mccormick Ingredients Pvt. Ltd. • A V Thomas Intl. Ltd. • Chordia Food Products Ltd. • Devon Foods Ltd. • Eastern Overseas Ltd. • Empire Spices & Foods Ltd. • Indian Chillies Trdg. Co. Ltd. • Indian Products Ltd. • J C R Drillsol Pvt. Ltd. • Jamnadas Madhavji Intl. Ltd. • Kedar Spices Ltd. • Kohinoor Foods Ltd. • M T R Foods Pvt. Ltd. • Madhur Industries Ltd. • N H C Foods Ltd. • Nedspice Processing India Pvt. Ltd. • Ramdev Food Products Pvt. Ltd. • S T C L Ltd. • Shalimar Chemical Works Pvt. Ltd. • Swani Spice Mills Pvt. Ltd. • Vinayak Ingredients (India) Pvt. Ltd. Capacity: • Red Chilli Powder: 400 Kgs/Day • Sambhar Masala : 400 Kgs/Day • Biryani Masala: 400 Kgs/Day • Chicken Fry Masala : 400 Kgs/Day • Garam Masala: 400 Kgs/Day
Plant capacity: Red Chilli Powder:400 Kgs/Day •Sambhar Masala :400 Kgs/Day •Biryani Masala:400 Kgs/Day •Chicken Fry Masala:400 Kgs/DayPlant & machinery: Rs 54 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 317 Lakhs
Return: 30.23%Break even: 50.14%
Add to Inquiry Add to Inquiry Basket

MACARONI, VERMICELLI & ATTA NOODLES - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Macaroni are made from wheat flour, carbonic salt water, pure salt, soft water and other additives. Carbonic salt water with sodium or potassium carbonate as the main constituent is an important additive giving the stickiness, elasticity, smoothness and good taste. Mixing or compounding wheat powder and additives (powder state) or their solution, is the most important factor deciding the quantity of the dough (paste state) of the additives are incorporated, with wheat powder, either dissolved or dispersed in carbonic salt solution or in emulsion state. The quantity of water and salt used in the process differs in summer and winter, as viscosity and osmotic pressure are sensitive to temperature. Vermicelli is the symbol of religious festivals in India. It is prepared at the occasion of Rakshabandhan in the Hindu custom and at the occasion of Id-ul-fitter in the Muslim custom. Besides, it is regularly consumed by so many families as a sweet-dish, or curry or fired and salty. Atta instant noodles is a ready to cook and serve snack food which has become very popular in India in the recent years The noodles must contain 5.5% of the solids of eggs as percent of the total solid in the finished product. The egg solids can be put into the product by addition of frozen yolks, dried yolks, frozen whole eggs, dried whole eggs, or fresh whole eggs or yolks. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Indo Nissin Foods Ltd. • M T R Foods Pvt. Ltd. • Nestle India Ltd. • Om Oil & Flour Mills Ltd. • Surya Agroils Ltd.
Plant capacity: Macaroni :1MT/Day •Vermicelli : 1MT/Day •Atta Noodles: 1MT/DayPlant & machinery: Rs 33 Lakhs
Working capital: -T.C.I: Total Cost Of Investment:Rs 151 Lakhs
Return: 45.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

METHYL METHACRYLATE - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Methyl methacrylate (MMA) is an organic compound with the formula CH2=C(CH3)COOCH3. This colourless liquid, the methyl ester of methacrylic acid (MAA) is a monomer produced on a large scale for the production of poly(methyl methacrylate) (PMMA) but another major application is in surface coatings. MMA is also used as co monomer in methyl methacrylate butadiene styrene resins, used as a modifier for polyvinyl chloride (PVC). Methyl Methacrylate Monomer offers significant advantages as an additive in a wide range of copolymer-based products and is used in molding and extruded resins and extruded sheet (PMMA), in mineral surface composites, and coatings. Emerging uses of MMA in digital signboards and displays in the advertising industry and in optical applications such as LCD, LED screens, and flat panel displays in the electronics industry are stimulating growth in the market. Growing healthcare spending is spurring demand for PMMA in the production of medical devices. MMA is used for the production of pure or almost pure homopolymers (PMMA), but there is also wide variety of copolymer uses. Within the PMMA consumption categories, the largest is for cast and extruded transparent acrylic sheet (PMMA sheet). Liquid crystal displays : Acrylics is used in Liquid Crystal Displays (LCD) and the current and projected growth for large LCD screens for home theatre etc. has been a major driver for MMA expansions, especially in Asia, where virtually all the LCD manufacturing market is now concentrated. Moulding resins : MMA is used in the production of moulding resins (excluding the resin beads prepared for extruded acrylic sheet production). Most of the final products are destined for automotive parts and electrical appliances. Surface coatings : MMA is used for the production of surface coatings, both for industrial solvent based systems and increasingly, for water based acrylic dispersions for domestic and industrial use. MMA is used in water based acrylic dispersions for exterior masonry and wood coatings and semi gloss emulsions for interior decorative coatings. Gujarat State Fertiliser Company (GSFC) is the only producer of MMA in India. Installed capacity of 5,000 metric tonne per annum of MMA, along with plants for PMMA sheets (2,000 metric tonne per annum) and PMMA pellets (1,500-metric tonne per annum ). The consumption pattern of MMA in India differs from that of the rest of the world. The major use of the monomer in India is in the coatings industry, which accounts for about 70% of total consumption. Only 12% of total consumption is for making PMMA sheets and mouldings. Other applications include small uses of textile auxiliaries, sizing materials, modifier for PVC modifiers etc. With over 70% of Methyl Methacrylate (MMA) used in the production of Polymethyl Methacrylate (PMMA), the growing demand for PMMA against the backdrop of strong electronics production is benefiting growth in the MMA market. The growth in the market is also benefiting from emerging new applications of MMA, and its derivatives in a wide range of industries. Construction and automotive industries represent other major end-users of MMA in addition to electronics. Recovery in global GDP is poised to benefit consumption of MMA and its derivatives in architecture and construction, guided by the improving investments in residential and commercial construction projects. Stable automobile production trends worldwide are also expected to help boost global consumption of MMA. Polymethyl Methacrylate (PMMA) is expected to emerge as a substitute for existing medical polymers, against the backdrop of growing concerns over the health hazards caused by the use of PVC and polypropylene in addition to low biocompatibility issues. The presence of phthalate plasticizers in PVC is generating significant interest in PMMA in the healthcare industry. The growing use of plastics as a result of the increased focus on manufacturing light vehicles is helping spur demand for MMA/PMMA in automobile production. Stringent vehicle emission norms worldwide will additionally lend traction to growth in this sector. The automotive industry is one of the largest end user of MMA especially in molding and extrusion compounds. The use of MMA/PMMA in automotive plastics in addition to weight reduction also helps minimize vehicle vibration, cabin insulation, noise control, and enhance aesthetics. Specialty products such as optical-grade plexiglass, compact disk plexiglass and radiation shielding plexiglass are expected to offer lucrative growth potential. PMMA liquid membrane roofing system is a major advancement in the market, used in a wide range of applications including plaza decks, garden roofs, small roofs and irregular shaped roofs. The PMMA liquid membrane system is widely used in roofing crews owing to several benefits such as substrate compatibility, ease of use, speed and versatility
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Biodiesel - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Biodiesel (chemically known as fatty acid methyl ester) is an alternative fuel to conventional diesel (obtained from crude petroleum). When vegetable oil or animal fat is chemically reacted with an alcohol (methanol) and catalyst(caustic soda or caustic potash or sodium methoxide), biodiesel is produced along with glycerineas by product. This process is called transesterification. Biodiesel fuel has chemical properties that are similar to conventional diesel fuel and does not require any engine modifications or new equipment to enable its use as a blend stock or substitute for conventional diesel.Unlike conventional diesel fuel, biodiesel is renewable fuel and significantly reduces levels of harmful pollutants and global warming gases. The feedstock (vegetable oil and fats) include the following • Vegetable oils produced from oil seeds (like rape seeds / canola, soybean, sunflower, palm, jatropha, corn, cotton seed, etc) • Oil obtained from algae • Used cooking oil and grease (yellow, brown, etc) • Animal fat (beef tallow, poultry fat, pork fat, etc) • Fatty acids including palm fatty acid distillate • Wastes (e.g. waste oils, food processing wastes, etc), agricultural residues (straw, corn stover, etc), forestry residues and novel feedstocks, such as algae. Current R&D on biofuels is mainly focused on: • Developing cost-competitive advanced technologies to convert wastes into fuels; • Producing fuels with advanced properties that are compatible with existing engines and infrastructures (for air, long-distance freight, and shipping). However, biofuels production cannot be viewed in isolation. Biofuels are part of a growing global bioindustry, driven by the need to reduce reliance on fossil fuels, to decelerate climate change, increase fuel security and develop a greater range of bioproducts. With a growing global population, mean there is increasing local and global competition for land, feedstocks and water for food production (i.e. crops and livestock), non-food use (e.g. timber for construction), bioproducts (e.g. soaps, textiles, biopolymers, etc), and bioenergy (heat and power), as well as liquid biofuels. ? Selected producers of biodiesel in India • Universal Biofuels Pvt. Ltd • Southern Online Bio tech Ltd • Bannari Amman Sugars • My Ecoenergy • Emami Biotech Ltd To maximise the value of biomass resources, cascading production of bio products, liquid fuels and may be integrated in biorefineries. At the same time, biodiversity (species of plants and animals) need to be conserved, and forested areas must be protected as they act as important habitats and carbon sinks. In other words, the forests store large amounts of carbon in vegetation and soil. If areas are cleared for logging, grazing, crop production or constuction, the carbon is released into the atmosphere and habitat is lost. In order to ensure that communities, biodiversity and land are protected, a number of certification schemes and sustainability initiatives have been put in place for biofuels. These include initiatives by trade organisations, civil societies (NGOs), and government bodies. Further details are provided on the pages covering sustainability and certification of biofuels. In the coming decades, biofuels will be required for road, air, rail and shipping. An integrated biofuels strategy is required for meeting the competing needs of these different transport types at national and international level.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Melamine - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a synthetic polymer which is fire resistant and heat tolerant. Melamine resin is a very versatile material with a highly stable structure. Uses for melamine include whiteboard, floor tiles, kitchenware, fire retardant fabrics, and commercial filters. Melamine can be easily molded while warm, but will set into a fixed form. This property makes it ideally suited to certain industrial applications. Melamine resin is manufactured by mixing melamine with formaldehyde, and sometimes urea, under heat and pressure. The substances begin to polymerize and are forced into a mold which will create the desired shape. Under pressure, melamine releases water, which could make the plastic unstable if it is not removed. The materials finish polymerizing and create a finished product, melamine resin. Melamine resin is known as a thermoset plastic, because the plastic is fixed after molding. If exposed to enough heat, melamine will decompose. For this reason, melamine dishware should not be exposed to high temperatures like those in the oven and microwave. The plastic is able to withstand higher temperatures than other plastics, however. Because it is a thermoset plastic, melamine resin is difficult to recycle. Melamine is stable, when stored under normal warehouse conditions. Although not particularly hygroscopic, powdered melamine must still be protected from wetting because, like most powders, it will form lump over extended storage period. The use of melamine as fertilizer for crops had been envisaged during the '50s and '60s because of its high nitrogen content (2/3). However melamine is much more expensive to produce than other common nitrogen fertilizers, such as urea. To be effective as a fertilizer, it is essential that the plant nutrients are released or made available in a manner that matches the needs of the growing crop. The nitrogen mineralization process for melamine is extremely slow, making this product both economically and scientifically impractical for use as a fertilizer. New project proposal under implementation In India Company: Gujarat State Fertilisers & Chemicals Ltd.,(GSFC) Capacity: 40000 metric tonne per annum Project cost: Around Rs.1000 crore Location: Vadodara,Gujarat The contract has been signed for supply of knowhow, basic engineering and proprietary equipment with M/s. Casale, Switzerland. Project is planned to be operational in 2nd quarter of 2017-18. To check adulteration in milk and milk products, the Food Safety and Standards Authority of India (FSSAI) has notified the maximum permissible level of the contaminant — melamine —in dairy products. According to the notification, FSSAI has imposed a permissible limit of 1 mg of melamine in every kg of powdered infant formula, 0.15 mg a kg in liquid infant formula and 2.5 mg a kg in other foods. This has been introduced in the Food Safety and Standards (Contaminants, Toxins & Residues) Amendments Regulations 2015. Global scenario Global production / demand (Period:2015):1.3 million metric tonne .China is the largest single participant in the melamine market, accounting for half of world consumption. Melamine capacity in China was 2.40 million metric tonne per annum in 2014, around 70% of the world total. China has around 29 melamine producers. Europe is the second largest melamine market, accounting for nearly 25% of world consumption. United States accounts for only about 4 to 5% of global melamine consumption. Melamine consumption structure consists of 50% laminates, followed by adhesives and resins for wood. The demand for melamine is likely to go up in tune with the performance of the laminate / plywood/ particle board industry, which in turn would increase in tune with the growth of the construction / furniture industry . During the next few years, global melamine consumption will grow at rate of about 4% per year, driven by China‘s growth and increases in other regions such as other Asian countries (not including Japan), Central and Eastern Europe, and the Middle East. Annual growth in Central and Eastern Europe is expected to be 3 to 4%, largely the result of increased production of laminates and wood adhesives. Consumption growth in Western Europe is forecast at more modest rate of 1 to 2% per year. Other Asian countries (excluding Japan) are expected to show good consumption growth at an average annual rate of 4%.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 17 of 248 | Total 2480 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 247 248   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top