Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 15 of 248 | Total 2480 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 247 248   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Pulp and Paper from Bamboo - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Paper is a major product of the forestry industry, and is used widely in our society. Paper products are used not only in their obvious applications in the publishing industry and for writing on, but also in a variety of specialty papers, cardboards, brown papers etc. In addition, various chemicals are produced as a byproduct of the pulp and paper industry. The use of paper for various purposes is an essential feature of the modern society. Therefore pulp and paper manufacturing is very important part of modern industry. Pulp and paper production is based on the use of bamboo as raw material, but also on the consumption of large-scale chemicals, like chlorine, sodium hydroxide, etc. Bamboo is a fast-growing, evergreen plant belonging to the botanical family of grasses. It has long been used as a construction material and as a source of implements, weapons, and ornaments in several global regions, particularly in Asia. In these regions, bamboo pulp has also been used to make high-grade papers for many years. Paper is one of the basic needs of modern life. It is a well-known product, which is the only media of communication through writing. It is then off rital medium for propagation of educations. It is used in every part of life, i.e., education, office, researches, engineering, art, book printing, magazine, newspaper, etc.Bamboo paper has practically the same quality as paper made from wood. Its brightness and optical properties remain stable, while those of paper made from wood may deteriorate over time. The morphological characteristics of bamboo fibres yield paper with a high tear index, similar to that of hardwood paper. The tensile stiffness is somewhat lower compared with softwood paper.
Plant capacity: Writing Paper:100MT/DayPlant & machinery: Rs 5457 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 8300 Lakhs
Return: 26.62%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Activated Carbon Powder from Jute Sticks - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Activated carbon is a non-graphitic form of carbon, which could be produced by activation of any carbonaceous material such as jute sticks, coconut shells, bamboo, wood chips, sawdust, coal, lignite, paddy husk etc. Without adding any additives, chemicals or bonding agents, our Charcoal Powder is completely natural and odor-free. By reducing waste discharged into the environment, or rather, by making full use of our resources, makes Charcoal Powder environmental friendly, and the world, a better place to live. The Charcoal Powder itself has numerous of pores, the Charcoal Powder pores can effectively to suck air and all kinds of floating material, to sulfide, hydride, methanol, benzene, phenol and other harmful chemical substances to absorption, decomposition odor and deodorization. The technology in making Jut Stick Charcoal Powder is available locally and skilled man power is also available in our country. Few Indian Major Players are as under • Grasim Industries Ltd. • Indo German Carbons Ltd. • Ion Exchange (India) Ltd. • Triton Laboratories Ltd.
Plant capacity: Activated Carbon Powder:50 MT/DayPlant & machinery: Rs 215 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 729 Lakhs
Return: 29.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Polyethylene Wax - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Waxes are among the oldest worked materials used by humans. Their value as versatile construction materials ("man's first plastic") was discovered very early. Today, waxes are used mostly as additives and active substances. The use of waxes is expected to increase in the future because of their generally favorable toxicological and ecological properties. The word "wax" usually refers to a variety of organic substances that are solid at ambient temperature but become free-flowing liquids at slightly higher temperatures. The chemical composition of waxes is complex, but normal alkanes are always present in high proportion and molecular weight profiles tend to be wide. The main commercial source of wax is crude oil but not all crude oil refiners produce wax. "Mineral" wax can also be produced from lignite. Plants, animals and even insects produce materials sold in commerce as "wax." Polyethylene is made in a polymerization reaction by building long molecular chains comprised of ethylene monomers, mostly by using catalysts. The type and nature of the catalysts are of great influence on the polymerization. As catalysts became more efficient, the polyethylene products became purer and more versatile and the production process became simplier and more efficient. Demand for polyethylene wax in India will go up in tune with the performance of the application sector. In view of the versatile applications of the product in diversified sector, the demand for PE wax is likely to go up steadily in the coming years. Considering the Indian demand and export opportunities, PE wax project can be favourably viewed in India for investment.
Plant capacity: 20 MT/ DayPlant & machinery: Rs 258 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 704 Lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Paint Industry (Decorative Paint & Acrylic Emulsion Paint)

Paint is any liquid, liquefiable, or mastic composition that, after application to a substrate in a thin layer, converts to a solid film. It is most commonly used to protect, color, or provide texture to objects. Paint can be made or purchased in many colors—and in many different types, such as watercolor, synthetic, etc. Paint is typically stored, sold, and applied as a liquid, but dries into a solid. The binder is the film-forming component of paint. It is the only component that must be present if the binder material is suitable for application. Many binders are too thick to be applied and must be thinned. The type of thinner varies with the binder. The thinner is also called the vehicle, because it makes it possible to transfer the binder to the surface with a brush, roller or sprayer. Components listed below are included optionally, depending on the desired properties of the cured film. Paint can be applied as a solid, a gaseous suspension (aerosol) or a liquid. Techniques vary depending on the practical or artistic results desired. The decorative coatings have various applications such as interior and exterior house paints, primers, sealers, varnishes and stains. Industrial paints and coatings are used by several industries, including machinery manufacturing, automotive, and consumer goods. Based on their formulation, industrial paints and coatings can be segmented into four categories: water-based, solvent-based, powder, and UV-based. Few Indian Major Players are as under • Akzo Nobel India Ltd. • Arofine Polymers Ltd. • Asian Paints Ltd. • Bangalore Paints Ltd. • Beepee Coatings Pvt. Ltd. • Berger Paints India Ltd. • Godavari Paints Pvt. Ltd. • Jenson & Nicholson (India) Ltd. • Kansai Nerolac Paints Ltd. • Pelican Paints Ltd. • Rajdoot Paints Ltd. • Rich Paints Ltd. • Shalimar Paints Ltd. • Special Paints Ltd. • Tamil Nadu Paints & Allied Products Ltd.
Plant capacity: Decorative Paint:800 Kgs/Day •Acrylic Emulsion Paint:800 Kgs/DayPlant & machinery: Rs 96 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 303 Lakhs
Return: 24.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Solar Power Plant - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Renewable energy in India comes under the purview of the Ministry of New and Renewable Energy. India was the first country in the world to set up a ministry of non-conventional energy resources, in early 1980s. India's cumulative grid interactive or grid tied renewable energy capacity (excluding large hydro) has reached 33.8 GW, of which 66% comes from wind, while solar PV contributed nearly 4.59% along with biomass and small hydro power of the renewable energy installed capacity in India. Fossil fuel reserves are diminishing rapidly across the world, intensifying the stress on existing reserves day-by-day due to increased demand. Not only that, fossil fuels, presently contributing to 80% of world primary energy, are inflicting enormous impacts on environment. Climatic changes driven by human activities, in particular the production of greenhouse gas emissions, directly impact the environment. Energy sector has a key role in this regard since energy during its production, distribution and consumption is responsible for producing environmentally harmful substances. A secure and accessible supply of energy is thus very crucial for the sustainability of modern societies. There is an urgent need for a quicker switch over of energy systems from conventional to renewable that are sustainable and can meet the present and projected world energy demand. Solar power is one of the most promising renewable. It is reliable and less vulnerable to changes in seasonal weather patterns. Hydrogen, in the capacity of energy vector, is expected to be the optimum solution for intermittency and storage of energy produced by renewable. Thus, coupled with hydrogen as an energy carrier, solar energy has a large potential to become the fuel of the future. The present study is aimed to explore such potential for India in 2025. India is expected to have a high growth rate in energy demand over the coming years due to its huge population and rapid economic development. Few Indian Major Players are as under • Bhagyanagar India Ltd. • C P E C Ltd. • Central Electronics Ltd. • Environ Energy-Tech Services Ltd. • Epic Energy Ltd. • Gujarat Mineral Devp. Corpn. Ltd. • H B L Power Systems Ltd. • Harsha Engineers Ltd. • I T I Ltd. • Indian Metals & Carbide Ltd. • Indosolar Ltd. • J S W Green Energy Ltd. • Jai Bharat Gum & Chemicals Ltd. • Jain Irrigation Systems Ltd. • Moser Baer Solar Ltd. • N E P C India Ltd. • P L G Power Ltd. • Rajasthan Electronics & Instruments Ltd. • Reliance Industries Ltd. • Shurjo Energy Pvt. Ltd. • Star Delta Transformers Ltd. • Surana Solar Ltd. • Surana Telecom & Power Ltd. • Swelect Energy Systems Ltd. • Titan Energy Systems Ltd. • Ujaas Energy Ltd. • Usha (India) Ltd. • Websol Energy System Ltd. • X L Energy Ltd.
Plant capacity: Solar Power 10 MW:60,000 KWH/ DayPlant & machinery: Rs 5512 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 8447 Lakhs
Return: 5.68%Break even: 53.14%
Add to Inquiry Add to Inquiry Basket

LED Light Assembling - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A light emitting diode (LED) is a device which converts electrical energy in to light. LEDs are preferred light sources for short distance (local area) optical fiber network because they are inexpensive, robust and have long life (the long life of an LED is primarily due to its being a cold device, i.e. its operating temperature being much lower than that of, say, an incandescent lamp), can be modulated (i.e. switched on and off) at high speeds. A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode, which emits light when activated. When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This effect is called electroluminescence, and the color of the light (corresponding to the energy of the photon) is determined by the energy band gap of the semiconductor. LEDs primarily offer advances in efficiency, controllability, and life span. The key strength of LED lighting is reduced power consumption. LED’s are available with at the most Lumen efficiency of 110 Lm/Watt compared to 65-80 Lm/Watt of CFL and FTL, 45 Lm/Watt of Mercury vapour and 75 Lm/Watt of metal halide or 94 Lm/Watt of Sodium Vapour. LED tube light could replace for traditional fluorescent tubes in the following places like hotels, hospitals, factories/offices, commercial complexes conference/ meeting rooms, schools/colleges/universities, residential/institution buildings. Thus, due to demand it is a good project for entrepreneurs to invest. Cost Estimation Capacity • LED Bulbs (2.5, 5, 7 & 9 Watt Size): 400 Nos/Day • LED Tubes (20 Watt Size): 40 Nos/Day Plant & Machinery : Rs 8 Lakhs Cost of Project: Rs 24 Lakhs Rate of Return: 26.30 % Break Even Point: 82%
Plant capacity: LED Bulbs (2.5, 5, 7 & 9 Watt Size):400 Nos/Day •LED Tubes (20 Watt Size):40 Nos/DayPlant & machinery: Rs 8 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 65 Lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

PVC Flex Banner (Frontlit, Backlit & Vinyl) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

PVC flex is made out of PVC and fabric raw material, specially designed for solvent printing industry. It is suitable for indoor and outdoor printing used in billboard, display, banners and exhibition booth decoration. PVC Flex is best to all Digital printer specially designed for Indian market. Due to stable chemical character and excellent ink absorbency, PVC Flex will bring wonderful digital printing images for large format picture advertisements. In virtue of the high classic quality and best sales service, nowadays PVC Flex is playing an important role in signage & Banner Advertising industry. Flex is a sheet of polythene widely used to deliver high quality digital print for outdoor hoardings and banner, mainly printed by large color plotters in CMYK mode. These prints are efficient, Low-cost and durable substitutes of hand painted hoarding and hand written banner. Laminated Backlit flex products are widely used for indoor and outdoor advertisement. Its surface has fine ink absorption which is compatible for all solvent-based printers such as Vutek, Nur, Scitex, etc. With special treatment, the products have a good property of anti-microbial and anti-aging. Backlit flex is a good translucent media material design for backlit displays which perform a high printing quality while printing a single strike image. Its certain finishing treatment makes ideal performance. This market is booming with 25-30% annual growth and is worth around Rs 500-600 crore. PVC is the third-most-used plastic or polymer petrochemical, after polyethylene and polypropylene. Depending on the manufacturing process or polymerisation, there are two types of PVC. Suspension is plain or rigid PVC, used for construction works, while emulsion or paste PVC is used in coating and blending applications. PVC flex is an end-product, used in tarpaulins, canvas and printing. Thus, due to demand it is a good project for entrepreneurs to invest.
Plant capacity: PVC Flex Banner (Frontlit/Backlit) 440 g/m2:20 MT/Day •PVC Flex Banner Vinyl 440 g/m2:5 MT/DayPlant & machinery: Rs 550 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 1196 Lakhs
Return: 27.00%Break even: 50.14%
Add to Inquiry Add to Inquiry Basket

ZARDA - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Zarda is a mixture of tobacco, lime, spices, and occasionally, silver flakes is also added to pan and chewed. The tobacco industry is one of the most profitable industries in the world. Tobacco companies use their enormous wealth and influence both locally and globally to market their deadly products. Even as advocacy groups and policy makers work to combat the tobacco industry’s influence, new and manipulative tactics are used by tobacco companies and their allies to circumvent tobacco control efforts. It is important for tobacco control advocates to know which companies are present in their country, how and where they operate, the types and quantity of products sold, and marketing tactics used to sell tobacco products. By being informed about all aspects of the tobacco industry within a country, advocates are better equipped to fight for effective tobacco control policies. Smokeless tobacco is consumed without burning the product, and can be used orally or nasally. Oral smokeless tobacco products are placed in the mouth, cheek or lip and sucked (dipped) or chewed. Tobacco pastes or powders are used in a similar manner and applied to the gums or teeth. Fine tobacco mixtures are usually inhaled and absorbed in the nasal passages. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Dharampal Premchand Ltd. • Prabhat Zarda Factory Ltd.
Plant capacity: Zarda 25 gms & 50 gms Size Pack 500 Kgs/DayPlant & machinery: Rs 17 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 198 Lakhs
Return: 31.00%Break even: 25.20%
Add to Inquiry Add to Inquiry Basket

Sanitary Napkins - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

A sanitary napkin or a sanitary towel is an absorbent item used by a woman while she is menstruating or in any other situation where it is necessary to absorb a flow of blood. It also serves to protect clothing and furnishings.Not only must the sanitary napkin provide comfort and safety, but also enhance every woman's health and lifestyle. Thus, due to demand it is a good project for entrepreneurs to invest. Sanitary Napkins are exclusively used by adult girls & Ladies around the world during for maintaining physical aid & to avoid wetting or staining of the clothes. India’s sanitary napkin market has significant profit potential. The demand for such products is stable; purchases are recurring and not subject to normal business cycles. Historically, the price of feminine hygiene products have been relatively expensive, but that is changing as small and large businesses enter the market and make an accessible, lower-priced offering to a wider consumer base. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Carewell Hygiene Products Ltd. • Centron Industrial Alliance Ltd. • Dhanalaxmi Roto Spinners Ltd. • Diapers India Ltd. • Godrej Consumer Products Ltd. • Gufic Biosciences Ltd. • Johnson & Johnson Ltd. • Kimberly Clark Lever Pvt. Ltd. • Mediklin Healthcare Ltd. • Syncom Healthcare Ltd. • Tainwala Personal Care Products Pvt. Ltd.
Plant capacity: 18000 Packets/DayPlant & machinery: Rs 99 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 321 Lakhs
Return: 26.32%Break even: 45.69%
Add to Inquiry Add to Inquiry Basket

LED Light Assembling - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

A light emitting diode (LED) is a device which converts electrical energy in to light. LEDs are preferred light sources for short distance (local area) optical fiber network because they are inexpensive, robust and have long life (the long life of an LED is primarily due to its being a cold device, i.e. its operating temperature being much lower than that of, say, an incandescent lamp), can be modulated (i.e. switched on and off) at high speeds. A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode, which emits light when activated. When a suitable voltage is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons. This effect is called electroluminescence, and the color of the light (corresponding to the energy of the photon) is determined by the energy band gap of the semiconductor. LEDs primarily offer advances in efficiency, controllability, and life span. The key strength of LED lighting is reduced power consumption. LED’s are available with at the most Lumen efficiency of 110 Lm/Watt compared to 65-80 Lm/Watt of CFL and FTL, 45 Lm/Watt of Mercury vapour and 75 Lm/Watt of metal halide or 94 Lm/Watt of Sodium Vapour. LED tube light could replace for traditional fluorescent tubes in the following places like hotels, hospitals, factories/offices, commercial complexes conference/ meeting rooms, schools/colleges/universities, residential/institution buildings. Thus, due to demand it is a good project for entrepreneurs to invest.
Plant capacity: LED Bulbs (2.5, 5, 7 & 9 Watt Size):400 Nos/Day •LED Tubes (20 Watt Size):40 Nos/DayPlant & machinery: Rs 8 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 65 Lakhs
Return: 27.00%Break even: 63.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 15 of 248 | Total 2480 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 247 248   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top