Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 208 of 222 | Total 2218 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 208 221 222   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Spinning Mill Business | Most Profitable Textile Spinning Business

Introduction A spinning mill is a textile production facility that turns raw materials like cotton, wool, linen and silk into threads used in weaving textiles. Most spinning mills purchase their cotton from wholesalers and use it to produce yarn for sale. Other spinning mills spin their own raw materials on-site to create fabrics or textile products. A company may have one or more spinning mills that serve as its primary means of fabric production. In addition, large manufacturers may also contract out some of their thread production to smaller spinning mills. Visit this Page for More Information: Start a Business in Textile Processing Industry The Start-Up Procedure for a Spinning Mill A Step-by-Step Guide: Starting a spinning mill from the ground up, no matter how lucrative it may appear, is not easy. If you wish to establish a spinning mill, you must first learn everything there is to know about it. Here's how: First and foremost, establish your business site — obtaining land and developing space with the necessary infrastructure will take a considerable investment. Then build your entire plan around it. Product selection — what kind of product do you want to make? What is the price range? Who are you going to target as your customers? This list may go on and on, but one thing you must do first is create clear goals for yourself. Read Similar Articles: Textile Industry Start small - Don't be intimidated by large numbers or ambitious ambitions at first; start small and gradually increase your success. Feel free to extend your operations once you've established a solid basis for your company. Maintain employee satisfaction — Startups sometimes fail due to a lack of finance, poor management, or poor planning. You don't want your business to suffer as a result of any of these factors, so pay close attention to aspects like employee satisfaction and overall company culture at all stages of development. Related Project Report: Rising Demand in Spinning Mill Always have a contingency plan in place — in business, unexpected events are going to occur, which is why you should always be prepared for them. The greatest way to deal with obstacles is to meet them straight on rather than attempting to avoid them altogether. Be adaptable, robust, and flexible, and keep developing until you find a solution that works for your company. Read our Books Here: Textile Spinning, Processing, Natural Fibers, Natural Dyes, Pigments, Textile Dyes, Pigments, Dye Intermediates, Woollen Spinning, Weaving, Knitting, Dyeing Technology Starting a Spinning Mill Has Its Benefits Owning your own mill provides you with several tax benefits that are not available to people who don’t own and operate their own business. For example, most types of income generated by a spinning mill are considered pass-through income, which means they do not get taxed twice—once at the corporate level and again when they reach your hands. In addition, you can use various tax deductions to offset any taxable profits you make from selling textiles, yarns and rovings. Related Feasibility Study Reports: TEXTILE BLEACHING, DYEING, SPINNING, WEAVING, PRINTING, FINISHING AND TEXTILE AUXILIARIES PROJECTS Depending on how your business is structured, these deductions could include depreciation for property used in production; clothing purchases for employees; and travel expenses related to sales. Income made from selling textiles or yarns is also exempt from Social Security taxes if certain requirements are met. And if you hire employees to work in your textile processing operation, you will be able to claim exemptions for hiring veterans and disabled workers through Work Opportunity Tax Credits (WOTC). Market Outlook The worldwide textile industry was valued at USD 1000.3 billion in 2020, and between 2021 and 2028, it is predicted to increase at a CAGR of 4.4 percent. Over the forecast period, the market is predicted to be driven by rising demand for garments from the fashion industry, as well as the rise of e-commerce platforms. The textile industry is based on three main principles: designing, producing, and distributing flexible materials like yarn and clothes. Knitting, crocheting, weaving, and other methods are commonly employed to make a wide range of completed and semi-finished goods in the bedding, apparel, garment, medicinal, and other accessory sectors. Watch other Informative Videos: Textile Industry The textile industry is at the top of the food chain in India's manufacturing industry. It was expected to contribute 14% to industrial output, 4% to GDP, and around 11% to India's export revenues. In addition, it directly employs over 35 million people, making it the country's second largest employer. It has direct linkages to the rural economy, which is based on fibre crops, as well as a range of crafts, including as those involving cotton, wood, and silk, and handlooms, which employ millions of farmers and craftsmen in rural and semi-urban areas. In a global context, the industry accounts for 61% of loomage, 22% of spindleage, 12% of textile fibres and yarn output, and 25% of total world cotton yarn production. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

How to Start Tiles Adhesive (Polymer Modified Cementatious)

A tile adhesive is one of a variety of substances used to join tiles together. Tile adhesives come in several forms, including pneumatic and plastic injection guns, tubes and trowels. The most common tile adhesive today is polymer modified cementitious composites (PMCCs), which are usually pumped into molds that make up a certain area of a floor or wall. Other options include epoxy, hot-melt and natural cement tile adhesives. PMCC tile adhesives work well for indoor residential installations where moisture levels are not too high, as well as for swimming pools and commercial properties like gyms. In some cases, grout joints might be necessary when installing PMCC tile adhesives; often these joints can be filled with other types of cements as well. Visit this Page for More Information: Start a Business in Adhesives and Sealants Industry Production process of Tile Adhesives: Step 1: Selecting raw materials, Step 2: Mixing raw materials, and Step 3: Powder feeding system are all steps in the production of polymer modified cementatious tiles adhesive. Constant flow production defines the manufacturing process, which necessitates continuous raw material delivery and fluidization. A piece of powder is picked up and then delivered into an atomizer, where it is hung in air as particles are beaten in continuous flow production. After that, a portion of the powder is dispersed and blended in a fluidizer. Related Feasibility Study Reports: Adhesives and Sealants, Industrial Adhesives Finally, the mix is delivered to a tank with the appropriate amount of water for liquid mixing, which includes a pelleting mechanism. The efficiency of a fluidized bed has been noted to be dependent on efficient electrical equipment such as an agitator and a blower, without which it may fail at times. Compactors are also sometimes used to make pellets of a specific size. This polymer modified cementatious tiles adhesive is ready to use as a cement additive in concrete mixtures or precast concrete components (fibre reinforced plastic goods) with either glass or mineral wool reinforcing. Read Similar Articles: Adhesives and Sealants Uses Tiles adhesives are used to bond different substrates, such as ceramic, granite and marble surfaces. The applications include kitchen backsplashes, bathroom walls and floors, shower stalls, tub surrounds and other surfaces requiring waterproofing. The glue is also ideal for countertops that consist of multiple materials or natural stone. This bonding material can be applied to one or both sides, depending on your project requirements. It won’t crack, chip or peel away. Read our Books Here: Gums, Adhesives & Sealants Technology (With Formulae) Benefits of Starting Tiles Adhesive Manufacturing Business On account of demand, it is a new industry in India. Its demand is growing at a high rate due to increased use by various industries including construction, infrastructure and real estate. There is an untapped market for tiles adhesive that can be exploited by new entrepreneurs. It requires less investments as compared to normal cement business and have better profit margins. Trained manpower and manufacturing equipment availability makes it easy for entrepreneurs to set up their units in record time which will lead to a faster growth rate. Mini-plants or small scale plants are available as well with cost effective price range and hence also helps entrepreneurs to start their own tile adhesive business in lesser investment. Related Project Report: Polymer Modified Cementitious Tile Adhesives Market outlook The Tile Adhesive Market is predicted to expand at a rate of roughly 8% per year. Demand for quick-fix adhesives and long-lasting tile glue is continuing to grow. Furthermore, increased awareness of the benefits of titles adhesive, such as its durability and time-saving factor due to its quick mixing ability, is driving demand for tiles adhesive. In recent years, as a huge number of people have begun to migrate from rural to urban regions in pursuit of jobs, the use of sophisticated adhesives in the construction of residences and commercial structures has expanded in developing countries. As a result, the real estate market has grown, as has the usage of tile adhesives in the construction of homes and businesses. Furthermore, because today's consumers seek a more stylish and appealing interior in their homes, tiles adhesive is critical in ensuring the tiles' long-term resilience and endurance. Watch other Informative Videos: Adhesives and Sealants, Industrial Adhesives, Glues, Gums and Binders, Synthetic Resin, Resins (Guar Gum, Adhesive [Fevicol Type], Hot Melt Adhesives) Asia Pacific Tiles Adhesive Market Outlook The largest market for tile adhesive is Asia Pacific. More than 40% of the global tile adhesive market is accounted for by the Asia Pacific region. Demand in Asia Pacific is expected to develop fast during the estimated period as the number of operations in the end-use industry grows (2021-2031). The tile adhesive industry in Asia Pacific is dominated by China and India. The number of small and large-scale commercial construction projects has increased as international firms expand their investment in India's information and technology industries, resulting in an increase in the use of tiles adhesive. Aside from that, the Indian government has created the Make in India initiative to support the local chemical sector by granting tax relief for infrastructure improvements as well as tax incentives for R&D projects. These are the elements that are propelling the tiles adhesive market in India. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Liquid Epoxy Resin Manufacturing Business Plan Highly Profitable Business Opportunity

Liquid epoxy resin is a quick-drying, two-part epoxy resin. Liquid epoxy resin cures much faster than regular, dry epoxies, making it an ideal solution for wood and metal projects. Liquid epoxy resins feature superior bonding properties and are easy to sand, glue and paint liquid epoxy resins are a convenient alternative to traditional glue and paint combinations. Visit this Page for More Information: Start a Business in Epoxy Resin Industry Uses of Liquid Epoxy Resin It's possible to utilise liquid epoxy resin as a bonding agent, sealer, adhesive, or coating. Surface coatings and waterproofing paints use liquid epoxy resin solutions, whereas solid epoxy resins can be used as adhesives, sealants, and coatings. Pipeline lining materials, caulking compounds, and protective paint coatings are all made with liquid epoxy resin. Read our Book Here: Epoxy Resins Technology Handbook (Manufacturing Process, Synthesis, Epoxy Resin Adhesives and Epoxy Coatings) 2nd Revised Edition Methacrylate-based liquid epoxy resin and bisphenol-based liquid epoxy resin are the two main varieties (epichlorohydrin). Bisphenol products are polymerized at room temperature or heated to speed up the curing process using an acid or alkaline catalyst. For added curing strength, free formaldehyde is used in some formulations. Read Similar Articles: Resins Industry Manufacturing process 1. Raw Materials Preparation For manufacturing epoxy resins, first of all, we need raw materials like furfuraldehyde, oxirane (epichlorohydrin), methanol, phenol and others. The proportion of them should be strictly controlled as well as according to our final product specification so that quality and quantity will be meet our requirement. All equipment (including condenser, evaporator) must be checked before use in order to ensure good working conditions. Watch other Informative Videos: Profitable Projects on Paints, Pigments, Enamels, Varnishes, Solvents, Thinners, NC Thinner, Wall Coatings, Coatings, Wood Primer, Putty, Epoxy Paints 2. Fractional Distillation... 3. Condensation... 4. Cooling ... 5. Storage (bottling)... 6. Injection Molding... 7. Final Testing ... 8: Shipment.. Related Project: Epoxy Resin - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost And Revenue, Plant Economics Market Outlook: The global Epoxy Resin market size is anticipated to grow at a CAGR of 5.85%. Epoxy resins have a property of containing one more than one epoxy group per molecule and are thermosetting resins that make use of suitable cross-linking agents for higher reactivity. Epoxy resins are respected by being the largest raw material used for different chemical formulations. Read our Books Here: Synthetic Resins, Surface Coating, Paints, Varnishes & Lacquers, Gums, Adhesives & Sealants, Rosin & Derivatives, Resins, Oleoresins Formulation And Technology Highly conducive properties belonging to epoxy resins including high thermal stability, mechanical strength, moisture resistivity, adhesion, and heat resistance make epoxy resins as the resin of choice for several end-user applications such as laminates and insulators. Growing end-use industries including transportation, marine coatings, aerospace, electrical & electronic laminates, composites, and decorative powder coatings particularly in the Asia Pacific is also expected to impact the global market positively. Increasing research initiatives by key participants coupled with technology innovation in the field of modified resins is expected to create new avenues for industrial applications. Related Feasibility Study Reports: Adhesives and Sealants, Industrial Adhesives, Glues, Gums and Binders, Synthetic Resin, Resins (Guar Gum, Adhesive [Fevicol Type], Sodium Silicate Adhesive, Hot Melt Adhesives, Rubber Based Adhesive, Acrylic Adhesives, Guar Gum Powder, Gum Arabic) See More Links: Start a Business in Asia Related Market Research Reports Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects For more details: https://bit.ly/3HDerDI ???????????????????????????? ???????? NIIR PROJECT CONSULTANCY SERVICES, DELHI An ISO 9001:2015 Company ENTREPRENEUR INDIA 106-E, Kamla Nagar, Opp. Mall ST, New Delhi-110007, India. Email: [email protected] [email protected] Tel: +91-11-23843955, 23845654, 23845886 Mobile: +91-9097075054, 8800733955 Website: https://www.entrepreneurindia.co https://www.niir.org
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start a Production Business of Zinc Oxide from Zinc Dross. Profitable Project Opportunities in Inorganic Compound Sector

Zinc oxide, often known as zinc white or calamine, is a chemical compound. Zinc types can be recovered via galvanised sheets, batteries, automotive components, and galvanising techniques, among other things. Zinc ashes develop on the surface of molten zinc baths, and while the majority of them are zinc oxide, finely divided zinc particles will also stick to it. Zinc oxide is an inorganic compound with the formula ZnO. Zinc oxide, a white powder that is insoluble in water, is found in rubbers, plastics, ceramics, glass, cement, lubricants, paints, ointments, adhesives, sealants, pigments, meals, batteries, ferrites, fire retardants, and first-aid tapes. Visit this Page for More Information: Start a Business in Chemical Industry Projects Uses of Zinc Oxide from Zinc Dross Zinc oxide is used in cosmetics, metal casting, rubber compounding and certain white paint formulations. It is also used as an anti-caking agent in table salt. Zinc oxide powder and paste is used for sunscreen lotions, zinc oxide has been found useful when applied directly to diaper rash cream. The unusual texture of zinc oxide means that it has limited application as a pigmenting additive in plastics and coatings. In organic chemistry, zinc chloride can be used for epoxidation of alkenes using DARCO catalyst at room temperature without requiring solvent or any other added reagent. Read Similar Articles: Inorganic and organic Manufacturing There are two main methods of producing zinc oxide from zinc dross. The first is smelting and calcining, which can be done using one of two processes — molten salt or lime — or by directly reacting in an oxidizing atmosphere. The other is by adsorption on activated carbon or sulfated charcoal. Zinc chloride + CaO ? ZnO + CaCl2 ? ZnCl2 (s) + 2 O(g) ? 2 ZnO ? Calcium oxide + oxygen ? calcium carbonate Solid calcium hydroxide reacts with zinc vapour to form solid zinc hydroxide and gaseous hydrogen chloride; zinc hydroxide bonds with atmospheric oxygen to form zinc oxide. ZnCl2 (l) + H2O ? Zn(OH)4 ? Zinc chloride solution has low solubility for zinc oxide; zinc dissolves as metal and forms a basic solution. Related Feasibility Study Reports: Chemicals (Organic, Inorganic, Industrial) As acid is added to lower pH, more zinc dissolves until its solubility limit is reached. Zinc precipitates out of solution while dissolved chlorine continues to ionize into hydrochloric acid. This cycle continues until all zinc ions have reacted to form zinc oxide. A precipitate separates out, leaving clear liquid with most of its zinc remaining in solution. Watch other Informative Videos: Chemicals (Organic, Inorganic, Industrial) Market Outlook: India has become an attractive market for global producers of metal alloys, such as aluminium and zinc. Zinc Oxide Powder is not only sought after as a key ingredient in thousands of everyday items such as cosmetics, plastics, rubber and paper products, but also increasingly being used in emerging applications that make use of its optical transparency and reflectivity. Read our Books Here: Chemical Technology (Organic, Inorganic, Industrial), Fine Chemicals The Indian market outlook for Zinc Oxide from Zinc Dross (White Seal) Market report is expected to grow at a CAGR of around 7.8% during forecast period 2021-2026. The base year considered for estimating future market size of Zinc Oxide from Zinc Dross (White Seal) Market is 2021. Zinc Oxide, also known as calamine, zinc white, white zinc or simply zinc, is used in paints and coatings where it produces brilliant color and dries rapidly Related Project: Production of Zinc Oxide from Zinc Dross Growing prospect of zinc oxide in antimicrobial packaging is also likely to expand the potential biomedical applications. The global zinc oxide market was valued at over 1,400 kilotons in 2020, and it is expected to grow at a CAGR of over 4% in volume over the forecast period (2021-2026).The growing impact of such microorganisms on food safety, particularly in the ready-to-eat segment, has fueled zinc oxide market product development. Read our Book Here: The Complete Technology Book On Chemical Industries Zinc oxide's increasing use in antimicrobial packaging is likely to expand its biomedical applications. In 2020, the global zinc oxide market was worth over 1,400 kilotons, and it is predicted to rise at a CAGR of over 4% in volume over the forecast period (2021-2026).Growing demand from various end-use industries, as well as increased investments in R&D projects, are some of the key contributing factors driving the Global Zinc Oxide Market forward. See More Links: Start a Business in Asia Related Market Research Reports Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects For more details: https://bit.ly/3ss5AP3 #DetailedProjectReport #BusinessIdeas #StartupBusinessIdea #EntrepreneurIndia #NPCSProjects #BusinessConsultant #ProjectReport #Startup #BusinessOpportunity #BusinessPlan #Business #ZincOxideProduction #ZincDross #InorganicCompoundSector #ZincOxide #Zinc #Oxide #chemicals #ZincOxidefromZincDrossBusinessPlan #ZincOxideBusiness
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Production of Bio-Organic Fertilizer from Tea Waste. Most Profitable Business Opportunity

Bio-Organic Fertilizer (B.O.F) is an organic fertilizer made from black tea wastes, which are found to be rich in Potassium, Phosphorus and Calcium by certain studies that were conducted. These nutrient contents in Bio-Organic Fertilizer make it more effective than other commercial fertilizers which contain high percentage of nitrogen that results in negative environmental impacts such as eutrophication of water bodies and contamination of soil etc. Business Plan: Bio-Organic Fertilizer from Tea Waste Manufacturing Business Plan Therefore, it is believed that use of eco-friendly Bio-Organic Fertilizer can help farmers to achieve higher yields while retaining their lands fertility levels at moderate level due to its low N content; thus reducing input cost for farmer's purchase of commercial fertilizers and decreasing financial burden on small scale farmers. The bioorganic fertilizer also has highest level of microbial activity than any industrial manures. Visit this Page for More Information: Start a Business in Fertilizer Industry Uses Tea waste can be utilised to make bio-organic fertiliser that can be used in farming. Plant growth is aided by bio organic fertilisers, which improve soil structure and crop yields. Fruit trees, vegetables, ornamentals, turf grasses, and field crops are all examples of applications. Green manures are a type of cover crop used to improve the soil quality on farms. Green manure suppresses weed development by shadowing it, while others contribute nutrients to soils or increase legume nitrogen fixation. Bacteria on the roots of legume plants transform atmospheric nitrogen into ammonia, which is beneficial to plants. Manufacturing Process Manufacture of tea waste, The process begins with roasting and drying a certain quantity of tea leaves in special drum dryers. This produces Carbon Dioxide and Black Carbon that is used for making black tea. The carbon residue produced during drying is captured as Bio Organic Compound (BCO) which can be further utilized as Bio organic fertilizer. This organic residue contains Phosphorous, Potassium, and Nitrogen, Phosphate and several other essential minerals and trace elements. Read Similar Articles: Fertilizers - Inorganic and organic Further treatment gives rise to Bio Organic Fertilizer or Bio NPK Fertilizer from BCO. direct use of Tea waste in manufacturing bio organic fertilizer so it goes to landfills without getting any utilization value out of it even though it has huge production potential for manufacturing bio organic compound by converting into biogas or compost through aerobic decomposition. Market Outlook: The global biofertilizers market size was USD 1.60 billion in 2020. The market is projected to grow from USD 1.79 billion in 2021 to USD 3.98 billion in 2028 at a CAGR of 12.03% in the 2021-2028 period. Amplifying demand for organic products is leading to the increasing adoption of biological fertilizers. Higher recognition and acceptance of the product among farmers based across developed as well as developing economies are positively influencing the market. Related Feasibility Study Reports: Fertilizers, Fertilisers, Inorganic Fertilizers (Mineral Fertilizer), Macronutrients and Micronutrients, NPK, SSP, Single Super Phosphate, Urea, Nitrogen Fertilizer,Nitrogenous Fertilizer, Diammonium Phosphate Projects The rising soil and water pollution due to excessive usage of chemical fertilizers is further fueling the adoption of organic and sustainable fertilizers. Moreover, the active participation of agricultural producers in ramping up their production of agricultural biological, such as bio-origin fertilizers, is predicted to boost the market growth. This market is projected to witness continuous growth during the forthcoming years due to the rising demand for fertilizers that are compatible for sustainable and organic farming and agriculture practices. These fertilizers are an economical as well as eco-friendly option for crop production; hence, their adoption is rising across the globe. Moreover, other aspects, such as improvement in soil fertility, increase in nutrient uptake by plants, and low risk to human health associated with the use of bio-based fertilizers, are some of the factors driving the market growth. Watch other Informative Videos: Fertilizers, Biofertilizer, Inorganic Fertilizers (Mineral Fertilizer), NPK, Nitrogen Fertilizer,Nitrogenous Fertilizer, Diammonium Phosphate Projects Indian Fertilizer Market Trends: India is one of the top producers of agricultural products, such as pulses, wheat, rice, groundnut, potatoes, and onions. With the continuous population growth and the increasing demand for food crops, the demand for fertilizers has escalated in the country. In addition, with the increasing levels of urbanization and decreasing arable land, farmers are rapidly utilizing fertilizers to improve their production in India. Moreover, the Government of India is implementing initiatives and providing subsidies to produce high-quality seeds and cluster frontline demonstrations through Krishi Vigyan Kendra (KVKs), which is propelling the demand for fertilizers. Related Books: Biofertilizer, Biofertiliser,Biogas, Organic Farming, Vermicompost, Vermiculture,Biotechnology For instance, various programs undertaken by the National Food Security Mission (NFSM) are increasing the food productivity. They also reduce the imports of fertilizers, which is facilitating the production of domestic fertilizers in India. Furthermore, governing bodies are offering the necessary support to the farmers through diversified schemes and introducing new technologies to develop enhanced fertilizers at subsidized rates, which is positively influencing the market growth. Looking forward, the market is expected to grow at a CAGR of 5.5% during the forecast period (2021-2026).
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start your own Manufacturing Unit of Calcium Sennoside from Senna Leaves

Introduction Calcium sennosides are produced by extracting carbohydrates and proteins from senna leaves, which is also known as Senegalia senensis. These plants are rich in calcium molecules, which is what makes them so effective at relieving constipation. Ingredients like ginger root powder or peppermint oil to add even more pain relief. You can use calcium sennosides to create a variety of products, including: - Digestion Supplements - Anti-Inflammatory Products - Muscle Relief Creams - Pain Relief Creams. Business Plan: Lucrative Business Plan for Calcium Sennosides from Senna Leaves Production Benefits Calcium sennosides, also known as calcium polycarbophil or CSP, is made from senna leaves. It has been used in Asian medicine for centuries to treat constipation and other digestive ailments. It contains alpha-hydroxy carbons and helps your body absorb water faster, helping your stools pass through your digestive tract more quickly and smoothly. Since it takes up a lot of space in your stomach, you will feel full faster than you would normally. That can help you control your food intake better and lose weight. Because it absorbs water, it won’t irritate your bowels like some laxatives do. You can take calcium sennosides by itself or combine it with magnesium citrate or magnesium sulfate to boost its effectiveness even further. Visit this Page for More Information: Start a Business in Herbal Products Industry Manufacturing Process Making calcium sennosides is actually very simple, and requires very little in terms of equipment. If you intend to create calcium sennosides on an ad hoc basis, then all you will need are lab-grade scales, solvents and reagents – it’s a process that can be completed in any working laboratory. For large-scale production First off, to minimize costs, choose a site where two operations can run at once: decrystallization and distillation. Related Feasibility Study Reports: Herbs and Herbal Based Products, Ayurvedic Medicines, Cosmetics, Herbs, Medicinal Plants Cultivation, Processing, Herbal Extract, Natural Plant Extracts, Ayurvedic Pharma, Ayurvedic Products, Herbal Medicine, Herbal Cosmetics, Ayurvedic Formulations It also needs to have space for drying racks and enough storage room for packing materials like bottles or jars. The workspace itself should be brightly lit (to ensure good visibility) but away from windows (so nothing gets ruined by direct sunlight). Lighting also needs to be dimmable so different lighting conditions can easily be created when needed. Read Similar Articles: Herbs and Herbal Based Products Market Outlook: The Associated Chambers of Commerce and Industry of India (ASSOCHAM) has projected that the market size of herbal industry which is currently estimated at Rs.7,500 crores will be double to levels at Rs. 15,000 crore by 2022 as this industry would be growing at a compounded annual growth rate of over 20% henceforth. In a study brought out by ASSOCHAM on Herbal Industry and Global Market 2015, it is pointed out that India’s rich resource of medicinal plants and traditional treasure of knowledge in this area, its share at present is considered very meagre. Read our Books Here: Herbal Products, Aromatic Plant Cultivation, Processing, Herb, Medicinal Plants, Herbs Cultivation, Processing, Herb, Herbs Extracts, Aloe Vera Cultivation, Cultivation, Research Findings, Products, Formulations, Extraction & Processing, Processing, Herbs A quick estimate of the potential reveals that India can generate raw stock of around Rs. 300 billion and easily achieve around Rs.150 billion value added products. Thus, India is hardly able to exploit less than 50% of its potential.Interestingly both raw materials (herbs) and herbal products have ready market globally. Releasing the study, ASSOCHAM Secretary General, D.S. Rawat said that ideally, the niche market that India can focus on include Ayurvedic Medicines and Dietary Supplements (including health drinks), extracts, Oils and other derivatives, skincare and beauty aids. Watch other Informative Videos: Herbs and Herbal Based Products Key Players • Alchem International Pvt. Ltd. • Indena India Pvt. Ltd. • Kothari Phytochemicals & Inds. Ltd. • Vidya Herbs Pvt. Ltd. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing Business of Solar Panel (Polycrystalline and Monocrystalline) | Become a Renewable Energy Entrepreneur

Photovoltaic (PV) cells are used in solar panels to generate power. These cells generate direct current (DC), which is normally converted to alternating current by an inverter (AC). Solar panels (also called photovoltaic modules) are used to convert sunlight into electricity. The two types of cells that make up a typical solar panel are: monocrystalline and polycrystalline. Polycrystalline Cells Monocrystalline cells are solid blocks of silicon that are cut from a single crystal of silicon. Visit this Page for More Information: Start a Business in Renewable Energy Industry Polycrystalline Cells Monocrystalline cells are solid blocks of silicon that are cut from a single crystal of silicon. Polycrystalline Cells When making polycrystalline cells, silicon crystals are melted and poured into molds in order to create wafers (thin sheets). These wafers are then sliced up into individual cells and linked together. Business Plan: Solar Panel (both type of the PV Cells: Polycrystalline and Monocrystalline) Uses Solar energy has many uses. Photovoltaic panels are typically used to convert sunlight into electricity and are most commonly used in large-scale installations for power generation. The Energy (Including both type of the PV Cells: Polycrystalline and Monocrystalline). Solar power has a number of uses that range from powering up your cell phone to lighting your house. The two most common uses for solar panels are to generate electricity and heat water. Solar energy can also be used in other applications like pumping water, charging batteries etc. Read Similar Articles: Renewable Energy Manufacturing Process: Routinely Polycrystalline panels are produced by casting molten silicon into square ingots and slicing them into wafers. After refining to produce highly pure silicon at 99.9999% purity, a wafer of only 20 ?m thickness is made by a band saw from each square ingot and then its cut into smaller sized PV cells. These processes are considered routine manufacturing process in semiconductor industry. Read our Books Here: Environmentally Friendly, Eco-Friendly Products, Natural Products, Biodegradable Plastics, Natural Dyes And Pigments, Jute Products, Natural Fibers Monocrystalline Silicon Panels: The first-generation crystalline silicon panels were made with single-crystal (monocrystalline) silicon cells that were grown using an expensive gas/liquid handling method called plasma-enhanced chemical vapor deposition (PECVD). A large cylindrical boule of high purity monocrystalline silicon was grown directly in high temperature furnaces and sliced into wafers for use in PV modules. Related Feasibility Study Reports: Renewable Energy Sector, Green Power, Solar Energy, Biofuel, Hydroelectric, Wind, Geothermal, Biomass, Non-conventional Energy, New and Renewable Energy Projects Market Outlook: Between 2021 and 2028, the global solar power market is predicted to increase at a CAGR of 6.9%, rising from $184.03 billion in 2021 to $293.18 billion in 2028. As a result of the constant shift toward renewable energy, the worldwide solar panel industry is booming. Due to the increased adoption of solar power capacity, the EU, Asia-Pacific, Mexico, and Australia are also emerging as the most appealing markets. As electricity bills climb and solar panels become more affordable, this industry boom is projected to continue in the coming years. Watch other Informative Videos: Renewable Energy Sector, Green Power, Solar Energy, Biofuel, Hydroelectric, Wind, Non-conventional Energy, New and Renewable Energy Rising demand for solar panels in the residential rooftop solar industry, as well as reduced prices for polysilicon and silver used in solar cell manufacture, will help the market in the next years. Furthermore, since the cost of solar panels has decreased, governments in a number of countries have increased their efforts and provided subsidies, which is projected to aid the growth of the residential solar panel market. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

How to Set up Activated Alumina (spherical Balls) Business

Activated alumina (also known as spherical balls or aluminosilicate beads or XAD-4) The solid structure of activated alumina particles provides maximum surface area for absorption to occur. This property, coupled with its low density and high porosity, gives it excellent capacities for liquid/gas separations such as drying solvents, water treatment, and air purification. Visit this Page for More Information: Start a Business in Aluminium Downstream Sector Because it does not form any chemical bonds with most compounds, including acids and bases, activated alumina does not react with either material as it passes through. In air pollution control systems, active carbon may have to be mixed with other substances such as zeolites in order to improve its capacity for certain pollutants. Read Similar Articles: Chemical Industry Uses Activated Alumina Balls are made of highly porous aluminium oxide with a large surface area. Instrumental Air Drying uses Activated Alumina Balls for Heat Less Air Dryers, Heat Reactivated Dryers, Heat of Compression Air Dryers, and Reciprocated Air Dryers. All brands of air dryers benefit from the use of activated alumina balls. Spherical Balls is used as an adsorbent in liquids and gases. There are high pressures on one side and low pressures on the other due to pressure differentials that have developed in system valves or pump seals, activated alumina filters may be preferred to conventional filters. Watch Video: Production of Activated Alumina Spherical Balls. Profitable Business Opportunity Manufacturing process Manufacturing activated alumina spherical balls can be done in a variety of ways. Freeze drying and super filtration are the two most common procedures for generating spherical alumina products. In a nutshell, both techniques result in an ultra-fine, porous powder substance. Related Project: A Complete Business Plan for Activated Alumina (spherical Balls) Manufacturing There are a few key distinctions that make one procedure better than the other based on your individual needs. As a result, before choosing a process for producing spherical alumina, it's critical to think about which method will best fulfil your needs. Watch other Informative Videos: Chemicals (Organic, Inorganic, Industrial) Market Outlook: The activated alumina market size was 146.2 million in 2020 and will grow at a CAGR of 8.2% from 2021 to 2027. The proliferating oil & gas production coupled with increasing oil & gas exploration activities across the globe will augment the product demand. The market is majorly driven by factors, such as rising demand for clean water, shrinking water reserves, and implementation of new water treatment facilities. Activated alumina is formed by dihydroxylation of aluminum hydroxide to produce highly porous material. It is used in various applications including catalyst, desiccant, fluoride adsorbent, bioceramics, and others Increasing population coupled with rapid economic growth is expected to boost the market growth in Asia Pacific. Related Feasibility Study Reports: Chemicals,Chemicals Organic, Chemicals Inorganic, Zeolite, Sulphate, Wax, Activated Carbon, Polishing, Compounds, Acids, Starch, Nitrate, Phosphate, Formaldehyde, Biotechnology, Enzymes, Bio Fertilizer, Vermiculture and Vermi Compost Projects Government initiatives, such as the launch of various projects for the regular supply and treatment of water, are likely to propel the product demand over the forecast period. Product usage in the purification of lithium is gaining popularity. Lithium finds use in ceramics, glass, batteries, lubricating greases, and air treatment applications For More Details: https://bit.ly/3s36wtW See More Links: Start a Business in Asia Related Market Research Reports Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects #Activatedalumina #activatedaluminamanufacturers #activatedaluminaballmanufacturer #sphericalballs #chemicalpacking #Activatedaluminasphericalballs #Activatedalumina #sphericalballsBusinessplan #ProjectReport #BusinessOpportunity #BusinessPlan #NPCS #EntrepreneurIndia
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Production of Technical Grade Camphor Powder. A Lucrative Business Plan for Startup

Introduction There are three different grades of camphor: techical, food-grade and super-refined. Both technical and food-grade camphor consist of distilled solid alcohol with concentrated natural camphor oils added to them, but they are produced using different methods. Techincal grade camphor is boiled down to remove all extraneous matter such as water and leaves. Business Plan: Camphor Powder (Technical Grade) Making Business The final product will contain no chemicals at all since everything was removed during distillation. Technically-distilled camphor contains 100 percent pure camphor oil with all water, sediment and impurities having been removed during distillation process which makes technical grade camphor dangerous for human consumption. Visit this Page for More Information: Start a Business in Chemical Industry Projects Uses of Camphor Powder 1. Camphor Powder is used as a topical analgesic, antibacterial, antispasmodic, antipruritic, antiinflammatory, anti-infective, rubefacient, contraceptive, moderate expectorant, nasal decongestant, cough suppressant, and a variety of other pharmacological uses. 2. Camphor Powder's Health Benefits Camphor has long been used for a variety of health advantages, and its therapeutic properties were previously referred to as magical. 3. It functions as an expectorant, making it easier to breathe; 4. It soothes pain when applied to painful muscles; 5. It acts as an antiseptic, preventing bacteria from spreading; 6. Inhaling it can relieve symptoms of common colds and coughs. Read Similar Articles: Chemical Industry Manufacturing Process: The manufacturing process of technical grade camphor powder includes steam distillation of wood of Cinnamomum camphora. The wood residue obtained as a result of steam distillation is taken to be boiled in ethanol to get rid of unreacted cinnamaldehyde and water, so that it should become dark brown solid. Related Feasibility Study Reports: Chemicals (Organic, Inorganic, Industrial) Projects It should be granulated with 75% ethanol to obtain a free flowing powder. Then it will be dried at 50°C till constant weight loss is observed. In case if any wet residues are noticed after drying then calcination will be done at 200-250 °C under vacuum to remove all traces of moisture. Finally, it should be sieved using screen mesh 12-14s (80-120mesh) before packaging. Read our Books Here: Chemical Technology (Organic, Inorganic, and Industrial), Fine Chemicals Market Outlook: The global camphor market is predicted to grow at a CAGR of 7.9% during the next five years. In the coming years, the increased demand for camphor in the manufacture of medicine for various ailments is expected to move the camphor market forward. Because of its good chemical qualities, it has a wide range of uses in various end user sectors, including medications, food, agriculture, and chemicals, among others. It's also used to manufacture cough and chest congestion vapour ointments. Watch other Informative Videos: Chemicals (Organic, Inorganic, Industrial) Because of the rising demand for camphor in ointments, the market is likely to grow. In the regional market, Asia Pacific has the largest percentage of market share and is likely to maintain its dominance over the projection period. Factors such as increased demand for camphor as a treatment for a number of ailments are projected to affect market growth. In India, there are various sacred sites. In Hinduism, camphor is frequently used during god worship. The camphor market is predicted to develop in the next years as a result of this aspect. Key Players: • Camphor & Allied Products Ltd. • Kanchi Karpooram Ltd. • Mangalam Organics Ltd. • Oriental Aromatics Ltd. • Oriental Aromatics Ltd. • Saptagir Camphor Ltd. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Want to Start a Business in Chemical Industry? Invest in Production of Sodium Hydrosulphite.

The chemical substance sodium hydrosulfite, commonly known as sodium dithionite or sodium hydrosulfide, has the formula NaHSO2. The compound is the sodium salt of hydrosulfuric acid, consisting of sodium ions bound to two sulphur dioxide molecules. It's utilised in chemical operations as an oxygen scavenger, as well as in the filtration of drinking water and wastewater. Visit this Page for More Information: Start a Business in Chemical Industry Projects Uses of Sodium Hydrosulphite The use of sodium hydrosulfite is also widely used for food additive such as beer, salt, egg powder and so on; for anhydrous sodium sulfate manufacture of leather ingredients; in water treatment agent. Also it is used to produce sulfuric acid preparation and other chemicals industry. The appearance of gray or white crystal irregular cube or block, soluble in water but slightly soluble in ethanol, methanol. Read Similar Articles: Chemical Industry Manufacturing Process: Sodium hydrosulphite is produced in a two-step process from caustic soda and sodium sulphide. The first step is to produce hypo-sulphuric acid which is a solution of 35% w/w Sulphuric acid and 65% w/w water containing all of its oxygen bonded to hydrogen ions. Hydrogen gas is passed through it at 30-40°C whilst pass through another stream of chlorine into a pool at 22°C. Related Feasibility Study Reports: Chemicals,Chemicals Organic, Chemicals Inorganic, Zeolite, Sulphate, Wax, Activated Carbon, Polishing, Compounds, Acids, Starch, Nitrate, Phosphate, Formaldehyde, Biotechnology, Enzymes, Bio Fertilizer, Vermiculture and Vermi Compost Chlorine reacts with gaseous hydrogen to form hypochlorous acid HClO with some being used up in reaction whilst excess chlorine is vented off; concentrated sulfuric acid dissolves reacting forming Na2SO4, HCl and H2SO4. The production of hypo-sulphuric acid results in SO3 entering as a side product which becomes concentrated as it moves down the column away from vapour. Related Project: Production of Sodium Hydrosulphite Market Outlook: Sodium Hydrosulfite Market Size will likely grow by a CAGR of about 4% up to 2024. The rising paper products demand in Asia Pacific will drive the global sodium hydrosulfite market growth till 2024 owing to its extensive application as a reductive bleaching agent for pulp in the paper manufacturing process. Increasing consumer confidence, disposable income, and shoppers’ eagerness to keep up with the latest fashion trends are just a few of the major factors driving the textile market’s growth. Watch other Informative Videos: Chemicals (Organic, Inorganic, Industrial) Sodium Hydrosulfite Market in India provides top-level overview of Sodium Hydrosulfite industry in India. It covers Sodium Hydrosulfite market size and expected growth rate during forecast period, 2021-2024. In addition to above fundamentals, it contains revenue estimates for 3 years of all leading players in market, taking into account sales and revenue growth. The study also highlights key drivers, restraints, opportunities and challenges that affect India Sodium Hydrosulfite market. Read our Books Here: Chemical Technology (Organic, Inorganic, Industrial), Fine Chemicals Key Players: • Demosha Chemicals Pvt. Ltd. • Gulshan Chemicals Pvt. Ltd. • Kanoria Chemicals & Inds. Ltd. • Orchid Pharma Ltd. • Shankar Lal Rampal Dye-Chem Ltd. • T C P Ltd. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Startup Consulting Services Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 208 of 222 | Total 2218 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 208 221 222   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top