Google Search

Search

Already a Member ?

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 203 of 248 | Total 2480 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 203 247 248   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Profitable Business of Magnesium Sulphate

Magnesium sulphate is an inorganic salt with the formula MgSO4(H2O)x, where 0x7 is the number of atoms in the formula. Epsomite (MgSO4•7H2O), often known as Epsom salt, is a heptahydrate sulphate mineral that is commonly encountered. It works by boosting water in the intestines and replacing magnesium in the body. Magnesium sulphate is a laxative that can be taken orally to ease occasional constipation and to treat magnesium deficiency; however, the bulk of it is used in agriculture. The FDA has not approved all external applications for magnesium sulphate. Magnesium Sulphate is a chemical compound that contains magnesium, oxygen, and sulphur. Magnesium sulphate is also known as sulphate mineral and epsomite, both of which are used to make Epsom Salt. Magnesium sulphate has use in a variety of areas, including healthcare, agriculture, medicines, food additives, and others. It is employed both internally and externally in the medical field. Depending on the concentration, magnesium sulphate has a bitter or salty flavour. At low concentrations, it has a salty flavour, however at high concentrations, it has a bitter flavour. As a result, it may have the potential to be utilised as a salt substitute. Magnesium sulphate comes in heptahydrate, monohydrate, anhydrous, and dry forms, each carrying the equivalent of 2 to 3 hydration fluids. Natural sources of magnesium sulphate include saltwater, mineral springs, and minerals like kieserite and epsomite. The heptahydrate of magnesium sulphate is made by dissolving kieserite in water and then crystallising the heptahydrate. Magnesium sulphate is a fertiliser, a food supplement in animal feed, and a cathartic and analgesic in medicine. It is employed as a coagulating agent in rubber and plastics, in various plating baths, and as a drying agent for various organic solvents in the textile industry, as well as in the manufacturing of citric acid, magnesium stearate, monosodium gluconate, and various photographic solutions. After rising at a CAGR of 5.1 percent from 2021 to 2026, the Magnesium Sulfate Market is expected to reach $1,233.3 million by 2026. In the years ahead, the growing requirement to produce high agricultural yields, combined with the significant growth of the global agricultural business, is likely to be the primary driver of demand growth. Furthermore, the increased use of magnesium sulphate in the personal care and cosmetics sector to formulate a variety of important personal care items, such as hair products, skincare products, sun-tan products, and skin fresheners, will create new opportunities for the global magnesium sulphate industry to grow. Few Indian Major Players 1. Aksharchem (India) Ltd. 2. Liberty Phosphate Ltd. 3. Pioneer Magnesia Works Pvt. Ltd. 4. Sam Industries Ltd. 5. Welterman International Ltd. 6. Yash Chemex Ltd.
Plant capacity: Magnesium Sulphate: 72 MT Per DayPlant & machinery: 2.56 Cr
Working capital: -T.C.I: Cost of Project: Rs. 9 Cr
Return: 29.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Production Business of Zinc Sulphate

Zinc sulphate is a crystalline substance that is highly water soluble, clear, and colourless. It's also known as white vitriol and comes in the heptahydrate form, ZnSO4 •7H2O. It's found naturally in the mineral goslarite and can be made by reacting zinc with sulfuric acid. It's used to make lithopone, coagulation baths for rayon, electrolyte for zinc plating, as a mordant in dyeing, as a preservative for skins and leather, and as an astringent and emitic in medicine. Zinc sulphate is primarily utilised in fertiliser applications and as a supplement in animal feed. It's used on crops like pecans, deciduous fruits, peanuts, cotton, corn, and citrus, as well as in swine and poultry feeds. The most frequent dry fertiliser is zinc sulphate, and the most common liquid fertiliser is zinc chelates. Zinc sulphate is a preferred chemical for supplying zinc values in agricultural applications due to its excellent solubility in aqueous environments. Zinc is a necessary component of plant and animal life. It acts as a growth hormone in plants and impacts protein synthesis. Zinc deficiency causes plant stunting, yellowing of the leaves, and lower seed, grain, vegetable, and fruit production. The most popular and most effective long-term technique for addressing zinc deficiency is to apply zinc sulphate to the soil. Zinc sulphate can be sprayed in a band near the seed or as a broadcast treatment that is tilled into the soil. The most efficient placement of the band is to the side and below the seed. Zinc sulphate solution can be used to manufacture zineb (zinc ethylene bisdithiocarbamate). Zineb is a typical agricultural fungicide used to protect crops like apples, pears, cabbage, broccoli, and ornamentals, as well as citrus, stone fruit, cotton, and wheat. Zinc sulphate is used in agriculture to destroy weeds and protect crops from pests. Zinc sulphate is a significant element of the precipitating bath in the manufacturing of viscose rayon and in the electrolyte for zinc plating. Zinc sulphate is used as a mordant in dyeing, as a skin and leather preservative, and as an astringent and emetic in medicine. In the period 2020-2026, the global zinc sulphate market is expected to rise at a robust CAGR of 4.2 percent. The market is being driven by increasing usage as a fertiliser additive in the agriculture industry to prevent and repair zinc deficiency in crops, increased demand for applications of raw material for manufacturing latex products, and usage as a moss control herbicide. Zinc sulphate is used to treat zinc deficiency in humans and as a fertiliser in agricultural sprays to increase soil nutrition, and it is projected to play a significant role in market growth. Few Indian Major Players 1. Agro Phos (India) Ltd. 2. Aksharchem (India) Ltd. 3. Indian Farmers Fertiliser Co-Op. Ltd. 4. Jayshree Chemicals Ltd. 5. Liberty Phosphate Ltd. 6. Yash Chemex Ltd.
Plant capacity: Zinc Sulphate 33%: 2 MT Per Day Zinc Sulphate 21%: 2 MT Per Day Zinc Sulphate 12% Soln.: 2 MT Per DayPlant & machinery: 1.21 Cr
Working capital: -T.C.I: Cost of Project: Rs. 3.70 Cr
Return: 22.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Business Industry of Grain Processing (Grading, Cleaning & Packaging of Rice & Pulses)

Four milling is a physical process in which the kernel is cleaned, adjusted to a suitable moisture level, and then mechanically reduced to the proper particle size to produce a four. Fractionation is used in four production not only to separate bran, germ, and endosperm from one another, but also to ensure the milling endosperm particle size is correct. The technique does not include any chemical or heat treatments, and so does not result in grain purification. When comparing levels within the grain and the final mill fractions, the milling process might cause variations in the distribution of pollutants. Pulses are the dried and edible seeds of leguminous plants. Pulses are an integral component of traditional food baskets since they are a low-fat source of protein. These are the most important component of a well-balanced diet and a primary source of protein for India's vegetarians. Dal is typically made using pulses, rice, and chapatti. Dal with onions, tomatoes, and spices is a must-have snack in any home. Pulses are a staple of any vegetarian's diet, yet they're also popular among non-vegetarians. They are the primary protein sources. Pulses are used in a variety of recipes, including hot foods, sweet dishes, and others. Pulses are the most prevalent food in Indian households. Dal is a dry cereal that is consumed to provide the protein needs of a normal human being. Rice is the main source of income for West Bengal's rural inhabitants. Rice is the state's main food crop, out of a variety of crops. With an annual output of roughly 150 lakh tonnes, West Bengal is the country's top rice producer. Rice is made by hulling and dehusking paddy in a rice mill. 65 percent milled rice, 24 percent husk, and 5% bran layers make up the paddy. Humans are unable to ingest paddy in its uncooked form. It must be processed properly in order to yield rice. Rice is one of the world's most important food crops. However, because a large portion of the world rice production is consumed in the nations where it is produced, only a little amount of rice flows around the world. Seed is the most fundamental input in agriculture. The state of agriculture is determined by the quality of seed used by farmers. However, new cultivars and improved integrated crop management approaches are necessary for optimal productivity gains. Peanuts, also known as groundnuts, are a high-value commodity that can be sold raw but is incredibly adaptable and can be utilised in a variety of goods. The oil can be used in cooking, as a shortening, or as a foundation for confectioneries. It can also be used to make peanut butter. Groundnuts come in two varieties: bush and runner. The following are the most common ways that major food grains are used: • Directly as food. • For the generation of starch and the conversion of starch into glucose. • In order to make vegetable oil. • To make food that is high in protein. • For the purpose of making livestock feed. • In directly produced corn steep liquor, which is employed as a vitamin or mineral supply in the fermentation procedure. Food grains are the most common contents. Carbohydrate, protein, fibre, fat, minerals, vitamins, and the moisture outer coatings of cereal grains are all made up of cellulose fibre. When food grains are stored, moisture is lost and the quality deteriorates. Cereal grains are very significant food ingredients. Rice is the primary food source for about half of the world's population. Rice, wheat, and millets are the most commonly consumed cereals in India (jowar, bajra, ragi, etc.) They are the cheapest calorie sources. Cereals are essential sources of nutrients in an average Indian diet since they are consumed in such big quantities. From 2020 to 2027, the market for cereals and grains processing is predicted to rise at a rate of 10.40 percent. In the period 2020-2027, the increased consumption of food products will be the primary factor driving the growth of the cereals and grains processing market. For around 58 percent of India's population, agriculture is their primary source of income. Agriculture, forestry, and fishery had a Gross Value Added of Rs. 19.48 lakh crore (US$ 276.37 billion) in FY20. In FY20, agricultural and allied sectors accounted for 17.8% of India's gross value added (GVA) at current prices. Consumer spending in India would grow by as much as 6.6 percent in 2021, following a pandemic-driven drop. Few Indian Major Players 1. Arvind Kumar Nand Kumar Ltd. 2. Baba Agro Food Ltd. 3. Chennai Gate Rice Inds. Pvt. Ltd. 4. D D International Pvt. Ltd. 5. Fortune Rice Ltd. 6. G P A Capital Foods Pvt. Ltd. 7. Buniyad Foods India Ltd. 8. Hari Bhog Foods Pvt. Ltd.
Plant capacity: Moong Dal: 1 MT Per Day Masur Dal: 1 MT Per Day Toor Dal: 1.5 MT Per Day Chana Dal: 1 MT Per Day Kabuli Chana: 1 MT Per Day Desi Chana: 1.5 MT Per Day Katrni Rice: 1.5 MT Per Day Bengal Joha Rice:1 MPlant & machinery: 63 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 1.65 Cr
Return: 31.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing Industry of Kraft Paper

Paper or paperboard (cardboard) made from chemical pulp produced in the kraft process is known as kraft paper or kraft. Sack kraft paper (or simply sack paper) is a porous kraft paper with high elasticity and rip resistance that is used to package products with high strength and durability requirements. The kraft process produces stronger pulp than other pulping methods; acidic sulfite processes degrade cellulose more, resulting in weaker fibres, and mechanical pulping processes leave the majority of the lignin with the fibres, whereas kraft pulping removes the majority of the lignin present in the wood. Low lignin content is critical for the paper's strength because lignin's hydrophobic nature prevents the formation of hydrogen bonds between cellulose (and hemicellulose) in the fibres. Although kraft pulp is darker than other wood pulps, it can be bleached to produce a very white pulp. When strength, whiteness, and resistance to yellowing are critical, fully bleached kraft pulp is used to manufacture high-quality paper. For one reason, paper has long been a standard in packaging: it simply works. Despite all of the options for packaging and shipping protection, Kraft Paper has stood the test of time and has endured. -Strength-: Kraft paper is tough and can endure industrial pressures to keep property and supplies safe. Some people try to utilise lower-quality papers, which have their uses, but Kraft Paper's robustness stands out among other options when it comes to preserving items and materials. -Pallet Uses- Anti-slip Kraft Paper between layers of boxes, bags, and other materials avoids breakage and protects the products being shipped. Using pre-cut sheets speeds up the process of palatalizing products while also saving money in the long term by providing an extra layer of protection. The use of a Kraft Paper cardboard slip sheet on the base layer of palliated objects prevents the entire load from shifting during transportation. -Wrapping Individual Items- Kraft Paper is used to wrap goods individually in pottery stores and craft stores because it provides a cheap layer of protection at a fraction of the cost of alternative materials. Individual things are wrapped in Kraft Paper by manufacturers because they want their products to arrive in one piece and be ready for usage by the consumer or end-user. -Floor Covering- Kraft paper may be easily applied to floors to protect them during manufacture and construction. Some people use Kraft Paper to keep fibreglass from harming their floors. Others utilise Kraft Paper rolls to preserve their customers' floors during remodelling and construction projects. -Paint Masking- Paint overspray can harm an automobile, boat, or structure. By simply masking items to be painted with Kraft Paper, you may avoid unwanted overspray and save time and money. The global kraft paper market is expected to increase at a CAGR of 3.0 percent from USD 15.6 billion in 2019 to USD 18.7 billion by 2025. The rising demand for kraft papers in different end-use sectors such as food & drinks, building & construction, cosmetics & personal care, automotive, and consumer durables is expected to fuel the global kraft paper market's expansion. Furthermore, the kraft paper market is expected to develop due to factors such as rising urbanisation across areas and the recyclability of kraft papers. Few Indian Major Players 1. Aryan Paper Mills Ltd. 2. Best Paper Mills Pvt. Ltd. 3. Dev Priya Papers Pvt. Ltd. 4. Fiesta Papers Pvt. Ltd. 5. Galaxy Papers Pvt. Ltd. 6. Godavari Pulp & Papers Mills Pvt. Ltd. 7. Laxmi Govind Paper & Pulp Mill Pvt. Ltd. 8. Maharaja Paper Inds. Pvt. Ltd.
Plant capacity: Kraft Paper: 200 MT Per DayPlant & machinery: 47.24 Cr
Working capital: -T.C.I: Cost of Project: Rs. 74.42 Cr
Return: 26.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Demanding Business of E-Rickshaw Assembling

E Rickshaws are three-wheeled battery-operated vehicles that are considered an upgrade to traditional rickshaws and are more cost-effective than auto rickshaws and other fuel variants. These rickshaws have zero emissions and are frequently argued to be much better than other rickshaws because they are almost pollution-free. E rickshaws are becoming increasingly popular among rickshaw drivers, and they have opened up new prospects for people because they require little investment to earn a living. They provide significant returns in a short period of time, are simple to operate, and have low maintenance and operating costs. Because of its low maintenance costs, low fuel costs, environmental friendliness, lack of noise pollution, ease of operation, and last but not least, livelihood, e-rickshaws have become one of the most popular modes of transportation on city streets. The earnings for an e-rickshaw driver are pretty substantial without putting in much physical effort or investing much money, and it is thus a vital means of income for many. These e-rickshaws have three wheels and a differential system at the back. The chassis of these vehicles is made of mild steel tubing. E-Rickshaw Benefits • Environmentally friendly — because they are battery-powered, e-rickshaws may be the ideal alternative to petrol or diesel-powered cars. Because these rickshaws do not release smoke, they will not contribute to rising air pollution levels. The batteries that will be utilised to power these rickshaws may be effectively recycled, so resolving the issue of battery disposal. • Economical – E-rickshaws are relatively inexpensive and can be readily afforded by the average person. Passengers will be charged a lower transportation fee. It is cost-effective not only for customers, but also for business owners. The batteries can be readily recharged at home or anywhere else that has a suitable voltage. • No Noise Pollution — E-rickshaws do not generate any sound, thus they do not contribute to noise pollution. Passengers can enjoy a pleasant and relaxing trip. • Income — E-rickshaws provide a source of income for both literate and illiterate persons. E-rickshaw drivers may make a solid living without spending a lot of money. • Safety — when compared to other fuel-powered vehicles, e-rickshaws pose a lower danger. Because they are slower and lighter than an auto rickshaw, they are less likely to cause an accident. In the event of fuel-operated vehicles, there is a risk of explosion. • Low Maintenance - Because the engines are powered by electricity, they do not require any fuel. Because e-rickshaws do not have an engine or a transmission, they require less maintenance. In these rickshaws, the motor is smaller, and the battery is located below it. As a result, maintaining them is much easier. During the forecast period, the worldwide e-Rickshaw market is expected to grow at a CAGR of roughly 9%. The market's growth can be attributable to cheap transportation costs and low power consumption. E-rickshaws are widely acknowledged as a viable alternative to diesel, gasoline, and compressed natural gas auto rickshaws. Increasing public awareness of air pollution and other environmental issues that can be mitigated through the use of e-rickshaws. The controller, motor, batteries, harness, and throttle are the primary electronic components that make up the drive of an e-rickshaw. Any mismatch between these components is unpleasant and can lower performance. During this time, the worldwide e-Rickshaw market is expected to grow at a CAGR of roughly 9%. The market's growth can be attributable to the cheap cost of transportation, which is attributed to more mileage and lower power usage. The e-rickshaw market is expected to be driven by an increase in sales and production of electric cars as an alternative to fuel-based mobility, owing to many government efforts and environmental laws on the electric vehicle industry.
Plant capacity: E-Rickshaw: 200 Nos per dayPlant & machinery: 2.06 Cr.
Working capital: -T.C.I: Cost of Project: Rs. 25.80 Cr.
Return: 30.00%Break even: 68.00%
Add to Inquiry Add to Inquiry Basket

Setting up a Multispeciality Hospital (200 Bedded)

A hospital is a health-care facility that provides specialised medical and nursing services as well as medical equipment to patients. The most well-known type of hospital is the multispecialty hospital, which often features an emergency room to address urgent health issues such as fire and accident victims, as well as acute illness. Trauma centres, rehabilitation hospitals, children's hospitals, seniors' (geriatric) hospitals, and hospitals for specific medical requirements such as mental care and certain disease categories are all examples of specialised hospitals. When compared to normal hospitals, specialised hospitals can help save money on health treatment. Depending on the sources of revenue, hospitals are categorised as general, speciality, or government. A multi-specialty hospital is a health-care organisation that provides preventive, curative/ameliorative, palliative, or rehabilitative services, according to various definitions. It's designed to help individuals with a variety of diseases. A private hospital is a facility where patients can receive treatment for anything from a little fever to a major surgery. At truth, there are no restrictions on the kind of services that can be provided in a hospital. However, all private hospitals are equipped with the most up-to-date technology and equipment. Surgeons, physicians, E.N.T., specialists, children's specialists, eye surgeons, psychologists, and sex experts are all important in a hospital. The hospital industry's structure is complicated in nature, as it may be viewed from various perspectives. Because each hospital is unique in terms of structure, functions, performance, and the community it serves, each has its own set of characteristics. A speciality hospital is one that focuses on a certain sub-specialty of medicine (Urology, General Surgery, Cosmetic surgery, Bariatric surgery, Clinic Pathology, Padeatrics & Neonatology). For significant procedures, consultations with sub-specialists, and when sophisticated intensive care facilities are necessary, patients are frequently referred from smaller hospitals to a specialty hospital. These hospitals feature highly skilled professionals, cutting-edge equipment, and provide services 24 hours a day, seven days a week. Specialized diagnostics, dialysis for acute renal failure, ventilation for patients with respiratory failure, and intensive care for critically ill patients are all available at these facilities. These hospitals conduct research and have a well-stocked library. In 2020, the global hospital market was valued at USD4207.46 billion, and it is predicted to increase at a CAGR of 6.70 percent over the next five years. This is due to the expanding geriatric population, which is afflicted with a variety of chronic ailments such as cancer, diabetes, cardiovascular disease, and renal disease, among others. As a result, the number of patients in need of therapy has grown. Furthermore, rising healthcare expenditures by governments around the world, as well as the penetration of large hospital chains, are likely to drive market expansion in the coming years. Furthermore, through 2026, rising awareness and developments in diagnostic technologies are likely to generate profitable prospects for market expansion. Hospitals, medical devices, clinical trials, outsourcing, telemedicine, medical tourism, health insurance, and medical equipment are all part of India's healthcare industry. The healthcare sector is expanding at a breakneck speed, thanks to expanded coverage, services, and increased spending by both public and private entities. The hospital industry in India, which accounts for 80% of the entire healthcare market, is seeing a lot of interest from both international and domestic investors. The hospital industry is predicted to increase at a CAGR of 16-17 percent from $61.8 billion in 2017 to $132 billion in 2023.
Plant capacity: 200 Bedded HospitalPlant & machinery: 140 Cr
Working capital: -T.C.I: Cost of Project: Rs. 212.48 Cr
Return: 27.00%Break even: 50.00%
Add to Inquiry Add to Inquiry Basket

Rising Demand in Spinning Mill

The textile business relies heavily on spinning. It is a step in the textile production process that involves converting three types of fibre into yarn, then fabrics, which are subsequently finished with bleaching to form textiles. After that, the fabrics are made into garments or other items. Three industrial spinning technologies are available, as well as a handicraft community that uses hand spinning techniques. Spinning is the technique of twisting together pulled out strands of fibres to make yarn, though it is also used to describe the process of drawing out, twisting, and winding onto bobbins. Spinning is the most expensive step in the process of turning cotton fibres into yarn. Currently, ring-spinning frames create over 85% of the world's yarn, which are designed to draught the roving into the proper yarn size, or count, and impart the correct amount of twist. The strength of the yarn is proportional to the amount of twist. The length to length feed ratio might be anywhere between 10 and 50. Roving bobbins are put on holders that allow the roving to pass freely into the ring-spinning frame's drafting roller. The bobbin's spindle spins at a rapid pace, causing the yarn to expand when the twist is applied. The yarn on the bobbins is too short to be used in following processes, therefore it is doffed into "spinning boxes" and transferred to the next step, which could be spooling or winding. The worldwide textile industry was estimated to be worth USD 1000.3 billion in 2020, and it is forecast to increase at a CAGR of 4.4 percent from 2021 to 2028. Over the forecast period, the market is likely to be driven by rising demand for garments from the fashion industry, as well as the rise of e-commerce platforms. The textile industry is based on three main principles: developing, manufacturing, and distributing various flexible materials like yarn and clothes. Knitting, crocheting, weaving, and other methods are commonly employed to produce a wide range of completed and semi-finished goods in the bedding, clothing, apparel, medical, and other accessory industries. In the Indian manufacturing industry, the textile industry is at the top of the food chain. It was anticipated to contribute 14% to industrial output, 4% to GDP, and around 11% to India's export revenues. Furthermore, it employs over 35 million people directly and is the country's second largest employer. Its direct ties to the rural economy, which rely on fibre crops, are also strongly tied to a variety of crafts, including as those involving cotton, wood, and silk, and handlooms, which employ millions of farmers and craftsmen in rural and semi-urban areas. In a global context, the industry accounts for 61 percent of loomage, 22 percent of spindleage, 12 percent of textile fibres and yarn output, and 25 percent of total world cotton yarn trade. Few Indian Major Players 1. Aarti International Ltd. 2. Bhuvaneshwari Textiles Pvt. Ltd. 3. C T Cotton Yarn Ltd. 4. Dumraon Textiles Ltd. 5. Durairaj Mills Ltd. 6. Emmay Logistics (India) Pvt. Ltd. 7. Eurotex Industries & Exports Ltd.
Plant capacity: 30s Combed Cotton Yarn: 20.8 MT Per Day | Cotton Waste Comber Noil: 3.3 MT Per Day | Cotton Waste Carding: 2 MT Per DayPlant & machinery: 59 Cr
Working capital: -T.C.I: Cost of Project: Rs. 82.94 Cr
Return: 26.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Setting a Profitable Business of Edible Oil Refinery (Soya & Palm)

Fruits, plants, and animals are all sources of edible oil. It is used in the preparation of a variety of dishes. Soybean, palm, rapeseed, and sunflower oils are popular with purchasers among the many varieties of edible oils available commercially. Because of the growing popularity of crude, natural, healthy, and organic vegetable oils, the edible oil industry is expected to increase significantly in the future years. Low-fat, low-cholesterol, and low-calorie vegetable oils are expected to increase rapidly as people throughout the world become more health conscious. Edible oils are primarily used in cooking, however oils such as coconut oil, almond oil, and peanut oil are occasionally used in personal care products such as hair oils and soaps. Almond oil is also ideal for producing hard candies. It's perfect for candy centres, fondants, frostings, and fudges. Chocolate and chocolate coatings can be made using this flavour. Vegetable oils are also mixed into animal feed to boost their nutritional intake and fatten them up. Edible oil can be used to make bio-diesel, lubricants, solvents, and emulsions on a modest scale. The oil palm, Elaeisguineensis, is an African native. The oil derived from the mesocarp of the fruit - palm oil - and the kernel of the nut - palm kernel oil - are the major economic assets of this crop. In fact, the oil palm is the only fruit capable of producing both types of oil. Both are edible oils, but their chemical composition, physical qualities, and applications are vastly different. Palm oil is primarily used in the kitchen in the form of cooking oil, margarine, and shortening, but it also has non-food uses in the form of soap, detergent, and cosmetics. Soybean Oil: Soybean oil is high in linoleic and linolenic acid, two important fatty acids. These polyunsaturated fatty acids lower serum cholesterol through reducing lipoprotein (LDL) synthesis and promoting lipoprotein breakdown, as well as by the impact of linolenic acid. Linolenic acid lowers plaque development and thrombosis via boosting prostaglandin E3 production and lowering platelet aggregation. Edible oil is a type of cooking oil made from the fat of plants, animals, or microbes. At room temperature, edible oils are liquid and safe to consume. Triacylglycerides make up 96 percent of edible oils. Edible oils include ghee, mustard oil, sunflower oil, olive oil, rice brown oil, groundnut oil, soya oil, and palm oil, to name a few. Edible oils include trace levels of antioxidants that keep them from oxidising. Antioxidants are also added to edible oils to extend their shelf life. Antioxidants must, however, be provided in adequate amounts. The global demand for edible oils is expected to reach its peak due to increased awareness and appeal of unprocessed, non-refined, nutritious organic oils. The need for edible oils is being driven by the increased demand for omega 3 acid in foods. Due to a solid supply chain of edible oil products, the retail segment will further broaden the scope of growth for the edible oils market. More attractive growth prospects for the edible oils business will be created as personal disposable income rises. The global edible oil market is expected to increase at a CAGR of 3.57 percent from USD96.878 billion in 2019 to USD119.571 billion by the end of 2025, from a market size of USD96.878 billion in 2019. Because of the growing popularity of unrefined, unprocessed, nutritious, and organic oil, the worldwide edible oil industry is expected to develop significantly. Due to increased health consciousness among people all over the world, vegetable oils with minimal cholesterol, fat, and calories are anticipated to acquire a lot of traction in the future years. Furthermore, considerable improvements in the retail network, rising agricultural yields, oil output, and expanding economies are some of the primary factors driving the global edible oil industry forward. Few Indian Major Players 1. Adani Wilmar Ltd. 2. Betul Oil Ltd. 3. Divya Jyoti Inds. Ltd. 4. Edible Products (India) Ltd. 5. G-One Agro Products Ltd. 6. Hindustan Vegetable Oils Corpn. Ltd. 7. Itarsi Oils & Flours Pvt. Ltd.
Plant capacity: Refined Palm Oil: 50 MT Per Day | Refined Soya Oil: 50 MT Per Day Plant & machinery: 7 Cr
Working capital: -T.C.I: Cost of Project: Rs. 36.14 Cr
Return: 27.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Start Manufacturing of Aluminium Ingots from Aluminium Scrap

Aluminum is a light-weight silver-white metallic element that accounts for about 7% of the earth's crust. Steel (7480-8000 Kg/cubic metre) and copper (8930 Kg/cubic metre) weigh about a third as much. Aluminum is malleable, ductile, and easy to cast, with good corrosion resistance and durability. It is mined as bauxite ore and occurs predominantly as alumina when combined with oxygen. India possesses about 10% of the world's bauxite reserves and a bauxite-dependent aluminium industry. Demand is predicted to increase by 8-10% in the domestic market. India is estimated to have a capacity of 1.7 to 2 million tonnes of aluminium installed by 2020. Blooms, billets, and slabs are smaller casting results, whereas ingots are larger and more shaped. The cross section of an ingot is usually rectangular or square, but it is not required to be uniform across its length. (The cross section of the ingot may vary.) India's share of the global aluminium market is expected to be around 3%. After Australia (62 million tonnes), Guinea (17.50 million tonnes), Brazil (16.20 million tonnes), and China, India ranks fifth in bauxite output (10.75 mntonnes). With a total output of 9.25 million tonnes, India contributes around 6% of the world's total production of 159 million tonnes. India ranks sixth in reserves base, ahead of China with 2300 million tonnes. With a total output of 3 mntonnes, India ranked sixth in alumina production, accounting for approximately 5% of global production of 61 mntonnes. Aluminium is used in a wide range of applications, from aeroplane construction to packaging, with the electrical industry being a major consumer. The two sectors that account for more than half of the overall offtake are electricity and transportation. Power, transportation, consumer durables, packaging, and construction are the most important consumer industries in India. Power is the largest consumer (about 44% of total), followed by infrastructure (17%) and transportation (13%). (about 10 percent to 12 percent). Over the next five years, India's aluminium industry is expected to see a significant increase in demand. To add additional value to their downstream product portfolios, major companies are increasing large capacity and investing in new technology. This is being done to capitalise on rising demand in the building and construction sector, as well as transportation (metro and high-speed railway coaches), electrical and electronic consumer durables, and next-generation applications such as solar reflectors. Aluminum is also employed in the defence sector to make naval ships and surveillance drones. Few Indian Major Players 1. Aravali Infrapower Ltd. 2. Baheti Metal & Ferro Alloys Ltd. 3. Bothra Metals & Alloys Ltd. 4. Gravita India Ltd. 5. Indo Alusys Inds. Ltd. 6. Namo Alloys Pvt. Ltd. 7. Nealex Alloys Pvt. Ltd. 8. Perfect Alloys & Steel Ltd.
Plant capacity: Aluminium Alloy Ingots: 14 MT per day | Aluminium Scrap: 0.23 MT per dayPlant & machinery: 7 Cr
Working capital: -T.C.I: Cost of Project:Rs. 33.15 Cr
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

How to Start Undergarments (EOU) Manufacturing Industry | A Complete Business Plan on Men’s Undergarments Manufacturing

Men’s underwear is a form of close-fitting underwear worn by men. Men's undergarments are usually made of cloth, and intended to be durable, protective, fashionable and absorbent. They serve many purposes, ranging from support and protection for various parts of the body to enhancing male physical attributes as desired for erotic purposes. Men have been wearing some form of undergarment since prehistoric times, and all cultures have developed their own types and styles. In Western culture, men normally wear briefs or boxer shorts (informal), or boxer briefs (more formal). More recently, tighter-fitting jockstraps (also called supporter shorts) have become popular among adolescent boys in school locker rooms. Visit this Page for More Information: Start a Business in Readymade Garments Industry Uses of Men’s Undergarments Better Absorption: By wearing Men’s Undergarment (EOU), one can assure complete freedom from wetness and discomfort due to chafing during activities like workouts or when practicing sports activities. Thus, Men’s Undergarment (EOU) help in better absorption of sweat by keeping your skin dry. Related Project Report: Production Industry of Men’s Undergarment (EOU) Convenience: Wearing Men’s Undergarment (EOU) is convenient, especially for those who prefer exercising without shorts on. Since it provides a barrier between your skin and your pants, Men’s Undergarment (EOU) makes you feel more comfortable and less restricted during activities like sports and workouts. Health Benefits: Wearing Men’s Undergarment (EOU) also helps in keeping one safe from any infections that can be caused due to sweat by absorbing it better compared to plain pants or briefs. They keep your private parts free from rashes and infection caused by bacteria, and thus, help you stay healthy and fit. Read Similar Articles: Industry: Textile Industry Cost-Effective: Buying Men’s Undergarment (EOU) is extremely cost-effective because of its low maintenance cost as well as its ability to last for a long time without wearing out easily. Men’s Undergarment (EOU) can be washed and used again and again, unlike many other clothing items that need frequent replacement due to constant wear and tear. This makes Men’s Undergarment (EOU) an inexpensive way of dressing up, compared to buying new clothes regularly. Variety: Men’s Undergarment (EOU) are available in different materials, styles and designs which help them cater to all kinds of preferences. For instance, you can find Men’s Undergarment (EOU) made from cotton lycra blends or microfiber fabrics which are lightweight while also being soft against your skin; they are also ideal for people who tend to get irritated by common fabrics like cotton or polyester. Watch Video: Cutting a pattern and generating cloth mock-ups are the first steps in the Men's Underwear manufacturing process. Patterns are composed of paper and are used to make all fitting components, such as tops, bottoms, inserts, and special things like belts and ties. Fabric mock-ups are made by folding or cutting out paper patterns on fabric to get a general concept of how an item will look once it is finished. After all of the elements from the mock-up have been cut out, they can be put together to make a working garment. Related Feasibility Study Reports: Readymade Garments, Textile & Textile Auxiliaries, Hosiery, Spinning, Jeans and Under Garments Hand or machine stitching is an option. Any openings are sewed shut with either manual sewing (with needles) or machine sewing when the stitching is finished (using specialised equipment). Garments can be put together with zippers, snaps, and buttons in addition to stitching. Assembly is completed by trimming surplus material. Before being distributed to retailers or wholesalers, finished clothing are inspected for flaws. Read our Books Here: Textile Spinning, Processing, Natural Fibers, Natural Dyes, Pigments, Textile Dyes, Pigments, Dye Intermediates, Woollen Spinning, Weaving, Knitting, Dyeing Technology Market Outlook The global men’s underwear market size is expected to register a CAGR of 5.3% from 2019 to 2025. Increasing awareness about health, best fit, and personal hygiene coupled with growing millennials population is expected to drive the growth. Increasing availability of a wide range of products and designs suitable for various purposes including sports, regular wear, and functional wear among other is anticipated to further fuel the product demand. Watch other Informative Videos: Textile Industry Improving fashion trends, increasing disposable income, and changing consumer lifestyle and preferences are expected to boost the market growth. Increasing concern regarding the fabric used for manufacturing underwear is one of the major factors driving the market. Availability of products in a variety of fabrics such as cotton, polyester, nylon, rayon, silk, and cotton blends is driving the product demand. Manufactures focus on intimate product designs and patterns such as thongs, C-string, tanga, and jockstraps among others to cater to a larger consumer base. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 203 of 248 | Total 2480 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 203 247 248   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top