REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Mizoram- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mizoram is a state of India. It is located in the northeastern part of the country and is bounded by Myanmar (Burma) to the east and south and Bangladesh to the west and by the states of Tripura to the northwest, Assam to the north, and Manipur to the northeast. The capital is Aizawl, in the north-central part of the state. Agriculture is the dominant economic activity of Mizoram, engaging more than two-thirds of the workforce. Two types of agriculture are practiced: terrace cultivation, in which crops are planted on relatively permanent, graduated terraces on the sides of hills and mountains to conserve water and reduce soil loss; and shifting agriculture, in which tracts called jhum are cleared by burning, cultivated for a limited period of time. Mizoram has a population of 1,091,014 with 552,339 males and 538,675 females. This reflects a 22.8% growth since 2001 census; still, Mizoram is second least populated state of India. The sex ratio of the state is 976 females per thousand males, higher than the national ratio 940. The density of population is 52 persons per square kilometer. Mizoram gross state domestic product (GSDP) in 2011-2012 was about 6991 crore (US$1.1 billion). The state's gross state domestic product (GSDP) growth rate was nearly 10% annually over 2001-2013 period. With international borders with Bangladesh and Myanmar, it is an important port state for Southeast Asian imports to India, as well as exports from India.

TOURISM

Mizoram, the Land of the Highlanders, is sandwiched between Myanmar, Bangladesh and the states of Tripura, Assam and Manipur. The rivers, peaks, plains and the lakes are the treasures of Mizoram. It is full of high ranges running from north to south covered by greenery throughout the year. The Mizoram State Government begins to recognize tourism as an important sector of the economy which needs to be developed for greater income generation. More emphasis on sustainable eco-tourism, adventure tourism, village tourism and rural tourism would bring in high - value tourism. With the increase of tourist the need for budget hotels has been acutely felt.

Tourism has emerged as an important economic activity and one of the fastest growing industries in the world. Globally, Tourism is the fastest growing industry and in terms of value, it comes third only after petroleum and Transport Industry.

 

As such, Tourism Department in Mizoram is also one of the fastest growing Departments in Mizoram. The Department has achieved these objectives by constructing Tourist Lodge, Tourist Resort and other Tourist amenities in difference places of Mizoram through liberal financing of Ministry of Tourism, Government of India.


INDUSTRIAL POLICY

The Industrial Policy of Mizoram State was first notified on 15.3.1989 to give direction to the strategy for Industrial development of the State. It laid stress on reducing shifting cultivation by encouraging a shift from primary to secondary sectors while protecting the Socio-Cultural and ethnic identity of the indigenous enterprise of Mizoram.

In view of the National Industrial Policy which laid special emphasis for the development of Industries in the North Eastern Region, the Govt. of Mizoram had notified new Industrial Policy 2000 for accelerated Industrial and Economic development of the State. The Government had adopted the approach for identification of thrust areas and promoting them with fiscal and other incentives packages. Broad policy of Foreign Direct Investment (FDI) and Investment from outside the State has been adopted on Joint venture (JV) mode to safeguard the interest of the tribal population of Mizoram. Various administrative support system and market support system are also announced. The Govt. of Mizoram is mandated in giving sustainable employment and introducing better utilization of land by introducing New Land Use Programme (NLUP).

OBJECTIVES

•        To create infrastructure facilities, provide incentives and marketing as well as technical support to industries.

•        To provide skill development and training for educated youth to develop entrepreneurial skills and make them self-employed.

•        To create employment opportunities particularly to the vulnerable section of the society and people in rural area, ensuring inclusive development.

•        To reduce sectoral and regional imbalance in the industrial development in the State by promoting Industries under all sectors.

•        To create proper linkage of processing Industries with the farm produce of agriculture, horticulture, forest and livestock’s.

•        To attract investment in the state.

IDENTIFICATION OF THRUST AREAS

Thrust will be given for those industries based on value addition of locally available resources. Special incentives will be formulated for speedy development of industrial units engaged in any of the following thrust sector Enterprises.

•        Forest-based Industries

The vast bamboo and other forest resources of Mizoram will be optimally harvested for setting up of Industry for manufacturing of various high value bamboo and other forest based products.

•        Food Processing Industries

Primary production of various food items, whether agricultural based, horticultural or livestock based will be linked with processing Industries.

•        Handloom Industries

Handloom sector will continue to receive serious attention of the Govt. Utmost importance will be given for improving quality product by introducing improved design, packaging, branding.

•        Handicraft Industries

The traditional skill of Mizo people will be upgraded and diversified for market competitiveness of handicraft products.

•        Plantain fibre and hill brooms

The Govt. will encourage value addition of hill-brooms. The flow of raw and unprocessed broom outside the state will be discouraged by giving attention towards value addition to help local industry.

•        Textile related industries

Bulk production of readymade garments will be encouraged as this sector is having good potential for market outside the state and export.

•        Animal Feed and poultry feed Industries

The Government is giving thrust towards having sufficient meat and meat products for which farming has been encouraged.

INCENTIVES

The incentives offered under the Rules for the grant of incentives/subsidies under the Industrial Policy of Mizoram State are-

•        Subsidies on the cost of Project Report 

•        Land subsidy

•        Factory rent subsidy

•        Manpower development subsidy

•        Interest subsidy

•        Power subsidy

•        Subsidy on Power Line 

•        Subsidy on Power Generating set

•        State Transport subsidy on Plant and Machinery 

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 178 of 249 | Total 2486 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 178 248 249   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Manufacturing of 7-Aminocephalosporanic Acid (7-ACA)

Manufacturing of 7-Aminocephalosporanic Acid (7-ACA) – Active Pharma Ingredient (API). Profit-Making Industry for Startups. 7-aminocephalosporanic acid is abbreviated as 7-ACA, white or almost white crystalline powder, 7-ACA is an important nucleus in synthesis of cephalosporin antibiotics, in the nucleus 7 and 3 chemical transformation can be used to prepare many cephalosporin’s: cefazolin sodium , cefotaxime sodium, ceftriaxone sodium, Cefoperazone sodium, sodium ceftazidime, cefuroxime sodium. Cephalosporin antibiotics (Cephalosporin) are a cluster of broad-spectrum semisynthetic antibiotics, they all contain the nucleus of 7-aminocephalosporanic acid (7-ACA), with different groups in the 3 and 7 carbon atoms, forming various cephalosporin with different antibacterial activity and pharmacokinetic characteristics. Cephalosporin antibiotics have broad antibacterial spectrum, strong antibacterial effect, and fewer allergic reactions, and only part of the cross allergic with penicillin and they have varying degrees of stability on the ?-lactamase. Cephalosporin have fast development, and many families, they are divided into four generation cephalosporin according to the anti-microbial dynamic. Related Project: - 7-aminocephalosporanic Acid (7-aca) Strength of APIs Manufacturers use certain standards to determine how strong the API is in each drug. However, the standard can vary widely from one brand to another. Each brand might use different test methods that can result in different potencies. In all cases, manufacturers are required by the FDA to prove the potency of their products in real-life patients, as well as in laboratory conditions. Related Projects:- Active Pharmaceutical Ingredient (API) Products, Bulk API Manufacturing Market Outlook The Global 7-Aminocephalosporanic Acid (7-ACA) Market is growing at a faster pace with substantial growth rates over the last few years and is estimated that the market will grow significantly in the forecasted period i.e. 2019 to 2026. The increasing prevalence of congenital heart disease acts as a growth driver for the overall market. Epidemiological studies have shown how lifestyle habits such as smoking and dietary irregularities-which can result in obesity-are associated with increased risk of disease. Increasing prevalence of obesity is hence estimated to drive the demand for APIs. Related Books:- Pharmaceutical, Drugs, Proteins Technology Handbooks The active pharmaceutical ingredients share price has risen incrementally over the past few years due to medicinal properties. The drugs taken together with combined therapy have numerous active ingredients to treat a range of disorders. The various types of active pharmaceutical ingredients are prime elements in the production of drugs, and this global market is estimated to experience optimistic growth in the upcoming period. Related Videos: - Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs, Pharma Drug Ingredients Intermediates, Pharmaceutical Bulk Drugs Role of Government towards API The coronavirus outbreak disrupting supply of active pharmaceutical ingredients (APIs) and medical devices from China to India, the government has come out with four schemes worth Rs 13,760 crore to encourage manufacturing of bulk drugs and medical devices in the country and their exports. On March 21, the Union Cabinet under the chairmanship of Prime Minister Narendra Modi had approved an expenditure of Rs. 9,940 crore and Rs. 3,820 crore for APIs and medical devices, respectively. Market Research:- Market Research Report The Cabinet also approved a scheme on promotion of bulk drug parks for financing common infrastructure facilities in three bulk drug parks with financial implication of Rs. 3,000 crore for next five years. The government will give grants-in-aid to states with a maximum limit of Rs. 1,000 crore per bulk Drug Park. Parks will have common facilities such as solvent recovery plant, distillation plant, power and steam units, common effluent treatment plant etc. The government further approved production linked incentive (PLI) scheme for promotion of domestic manufacturing of critical KSMs/drug intermediates and APIs in the country with financial implications of Rs. 6,940 crore for next eight years. Financial incentive will be given to eligible manufacturers of identified 53 critical bulk drugs on their incremental sales over the base year (2019-20) for a period of 6 years. Projects:- Project Reports & Profiles Out of 53 identified bulk drugs, 26 are fermentation based bulk drugs and 27 are chemical synthesis based bulk drugs. Rate of incentive will be 20 per cent (of incremental sales value) for fermentation based bulk drugs and 10 per cent for chemical synthesis based bulk drugs. The PLI scheme will lead to expected incremental sales of Rs. 46,400 crore and significant additional employment generation over eight years. The drug industry has welcomed the incentives offered by the government to promote API units in India. Related Project:- 7-aminocephalosporanic Acid (7-aca) Besides APIs, the Cabinet also approved the scheme for promotion of medical device parks in the country in partnership with the states. A maximum grant-in-aid of Rs. 100 crore per park will be provided to the states. It will have financial implications of Rs. 400 crore. The PLI scheme for promoting domestic manufacturing of medical devices will have financial implications of Rs. 3,420 crore for next five years. Medical device is a growing sector and its potential for growth is the highest among all sectors in the healthcare market. It is valued at Rs. 50,026 crore for 2018-19 and is expected to reach to Rs. 86,840 crore by 2021-22. India depends on imports up to an extent of 85 per cent of total domestic demand of medical devices. Projects:- Project Reports & Profiles Tags;- #7AminocephalosporanicAcid #7ACA #7ACAProduction #7ACAMarket #Pharmaceutical #pharmaindustry #activepharmaceuticalingredientimport #activepharmaceuticalingrediants #activepharmaingredient #APIMarket #APIManufacturing #pharmaceuticalmanufacturing #ActivePharmaceuiticalIngredientsmarket #7AminocephalosporanicAcidBusinessPlan #APIbulkdrug #DetailedProjectReport #businessconsultant #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #BusinessPlan #InvestInStartups #StartupIdea #startupinvestment #StartupBusinessPlan #StartupPlan #NewRelease #startupinvestment #startup #bussinessplanshub #Startupbusiness4you #StartupBusinessPlan #startupinvestment #startup #InvestInStartups #StartupIndiaConsultants #Plan4Business #StartupPlan #InvestingCapitalForBusiness #HowToMakeYourBusinessMoreSuccessful #investorbusiness #Startupcapital #BusinessPlanning #TechnologyTrendsForBusiness #StartupIdea
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing of Rice Husk Based Biodegradable Cutlery

Manufacturing of Rice Husk Based Biodegradable Cutlery. Disposable Products - Business and Investment Opportunities. Biodegradable plastics are plastics that can be decomposed by the action of living organisms, usually microbes, into water, carbon dioxide, and biomass. Biodegradable plastics are commonly produced with renewable raw materials, micro-organisms, petrochemicals, or combinations of all three. Related Projects: - Biodegradable Products, Recyclable, Disposable, Eco-Friendly Plastics These Cutlery is fully compostable and biodegradable in approximately 100 days in properly maintained compost facilities. These eco-friendly products are perfect for restaurants, cafeterias, business functions, trade shows, festivals and fairs, catering. Compostable or biodegradable bio-plastics, most commonly used for utensils, are marketed as a sustainable alternative to single-use plastic. Market Outlook The global biodegradable cutlery market size was accounted for USD 33.9 million, in 2018 and is projected to grow at significant rate of CAGR of 5.9% during the forecast period, 2019 to 2025. The growing awareness about hazardous impacts of non-biodegradable waste is expected to positively affect the market growth. Related Books: - Environmentally Friendly, Eco-Friendly Products, Natural Products Increasing consumer awareness regarding the detrimental effects of using non-biodegradable products is among the key factors driving the growth of the market. Furthermore, the implementation of favorable government regulations discouraging the use of plastic tableware and other products is also providing a boost to the market growth. Biodegradable cutlery has gathered groundswell of interest among consumer worldwide due to compelling environmental reasons. To that end, augmenting the popularity of biodegradable utensils are their better sustainability than plastics cutlery and the salient environmental-friendliness of biodegradable materials. In particular, biodegradable cutlery made of plant-based materials and biodegradable bio-plastics have attracted widespread attention world over. Over the years, several countries have made concerted efforts to increase the awareness about the scope of disposability of biodegradable cutlery products. The biodegradable cutlery market has also seen advancements in educating end users about the correct procedures and limitations involved. Related Videos; - Biodegradable Products, Recyclable, Disposable, Eco-Friendly Plastics, Bioplastics, Compostable, Biodegradable Packaging Rising awareness of using biodegradable products and its impact is considered the key factors driving the market growth. In addition to this, strict government rules on using plastic are also augmenting market growth. Apart from this, growing food and beverage industry and the rising trend of online food delivery, is also boosting the market growth. Other factors such as rising disposable incomes, growing preferences for organic products among consumers and rising R&D activities are expected to drive the market in the upcoming year. Related Project: - Biodegradable, Eco-Friendly Cutlery using Rice Husk (Rice Hulls or Rice Husks) The Biodegradable Cutlery market has been reporting substantial growth rates with considerable CAGR for the last couple of decades. the Biodegradable Cutlery market is expected to grow more vigorously during the forecast period and it can also influence the global economic structure with a higher revenue share. The Biodegradable Cutlery market also holds the potential to impact its peers and parent Biodegradable Cutlery market as the growth rate of the market is being accelerated by increasing product demand, growing disposable incomes, innovative products, raw material affluence, and changing consumption technologies. Projects: - Project Reports & Profiles The Major Players in the Biodegradable Cutlery Market include: ? Eco-Products ? Dixie ? World Centric ? Lollicup USA ? AmerCareRoyal ? Biodegradable Food Service ? BioPak ? Vegware ? Ecovita ? Minima ? Dalian Yada Industrial ? NaturePac Related Projects: - Disposable Products and Projects Tags:- #RiceHusk #BiodegradableCutlery #BiodegradableCutleryManufacturing #BiodegradableCutleryMarket #BiodegradableProducts #BiodegradableMarketDemand #EcofriendlyBusinessIdea #BiodegradableProductMarket #ecofriendlyproducts #Ecofriendlycutlery #EcoFriendlyindustry #BiodegradableIndustry #DetailedProjectReport #businessconsultant #feasibilityReport #NPCS #startupbusiness #BusinessPlan #startup #InvestInStartups #HowToMakeYourBusinessMoreSuccessful #StartupIdeas #StartupProject #StartupBusiness #InvestInYourbusiness #investment #Growth #business #businessgrowth #investing
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Startup Business Opportunities in Wheat Starch and Gluten

Startup Business Opportunities in Wheat Starch and Gluten. Most Profitable Industry to Launch Startups. Wheat starch is a carbohydrate found in many plants and is a common part of the human diet. Typical sources of starch include wheat, corn, potatoes or tapioca. It is a polysaccharide containing an abundance of glucose molecules. Whether in its original form or as one of its derivatives, starch has a variety of uses in the food and manufacturing industries. Gluten in general is used as a meat extender in both food and feed. The fermentation industry consumes large amounts of gluten and by acid hydrolysis it is used for production of hydrolyzed vegetable protein and glutamic acid. A gluten based meat analogue was invented by the International Starch Group. It replaces up to one third of minced meat in popular meat balls. Another invention combines emulsifiers and gluten into a spray dried powder improving both baking quality of the flour and shelf life of the bread. Related Projects:- Food Processing and Agriculture Based Projects, Snack Food, Frozen Food, Agro Processing Technology, Processed Food, Instant Food, Food Industry, Food Preservation, Canned Food, Packed Food, Ready to Eat Food, Cereal Food, Pickle, Spices, Grain Milling Gluten is a group of seed storage proteins found in certain cereal grains. Although, strictly speaking, "gluten" pertains only to wheat proteins, in the medical literature this term is used to refer to the combination of prolamin and glutelin proteins naturally occurring in all grains that have been demonstrated capable of triggering celiac disease. These include any species of wheat (such as common wheat, durum, spelt, khorasan, emmer and einkorn), barley, rye and oats, as well as any cross hybrids of these grains (such as triticale). Properties and Applications Wheat starch is an essential part of the food sector, where it is used in food as a thickening agent. It is an emulsifier, stabilizer, and glazing agent that serves not only as a fat substitute but has applications in the creation of gels and adhesives. It is also useful in binding food. It is used in the preparation of gluten-free and low-calorie food. Its two major types are as follows: Related Books:- Starch & Its Derivatives Native Starch Modified Starch Use Noodles Cereals Whole Grain Bread Confectionaries Pasta Frozen Dough Meat & Meat Analogue Pet Foods Wheat Starch Wheat starch granules are divided in two groups by size, B-starch (15 - 20 %) is 2 - 15 m diameter and the larger A-starch granules (80 - 85 %) are 20 - 35 m. B-starch is contaminated with pentose’s, fibres, lipids and protein to an extent requiring special treatment in the factory. Related Videos: - Agro-Food Processing Industries Market Outlook The global wheat starch market is segmented on the basis of type, grade, end user, application, and region. The global wheat starch market is segmented on the basis of type which includes native wheat starch and modified wheat starch. The global wheat starch market is segmented on the basis of grade which includes food grade, feed grade, and industrial grade. The global wheat starch market is segmented on the basis of application in which wheat starch is used as in various application such as animal feed, drug formulations, paper-based products, textiles, and others. Related Books:- Agriculture, Agro Based, Bakery, Wood, Ice Cream, Chocolate Cereal Food, Confectionery, Dairy, Farming, Fisheries, Food & Beverages, Fruits, Meat, Milk, Oils & Fats, Snacks, Spices, Vegetables, Flowers, Rice, Wheat, Corn, Tobacco And Tobacco Products Wheat starch works as an emulsifier, and stabilizer for various end use industries. In food & beverage industry, wheat starch is used as a thickening agent for various food products. The global wheat starch market is segmented on the basis of end user such as animal feed, paper industries, and food & beverage industry, textile industries, cosmetic industries and others. Hence, the global wheat starch market is expected to increase significant growth. Wheat gluten is a popular high-protein food for vegans and is a by-product of wheat starch. Wheat gluten is widely used in preparing high-quality dough for baking. Industrially, wheat gluten goes through enzymatic hydrolysis to improve its functional properties such as solubility, emulsification, and film-forming properties. Wheat gluten is also prepared extensively as hydrolyzed proteins for hypoallergenic infant diets and nutritional therapy. Gluten also acts as a prebiotic by feeding the good bacteria in human bodies. Related Videos: - Starch & its Derivatives For instance, Arabinoxylan oligosaccharide is a prebiotic carbohydrate derived from wheat bran that helps in stimulating the activity of bifid bacteria in the colon. The global wheat gluten market is projected to grow with a significant growth rate of 8.22% from 2019 to 2024 and reach a market value of USD 1.37 billion by the end of 2024. The global market is majorly growing due to the increasing importance of a healthy lifestyle and popularity of plant-based food. Wheat starch is commonly used as a dietary supplement in the food and beverages sector; it can be also used as a fat substitute. It acts as a thickening agent in food through the processes of gelatinization and retrograde. The food-grade wheat starch is used to thicken or strengthen products such as puddings, soups, sauces, and pie fillings. It helps with texture, viscosity, gel-forming, adhesion, binding, and moisture retention. This starch is also an essential material in high-quality restaurants, hotels, and domestic cooking applications. Rising health concerns among consumers are anticipated to spur the demand owing to the high nutritional value they provide in foods. Increasing cases of obesity all over the globe is expected to surge the demand as they are low in calorie leading to weight loss. In addition, the overall market is predicted to increase owing to the use by body builders and sportsmen for gaining muscles and enhancing strength. Rising applications of these proteins as an additive in animal feed is expected to augment the industry growth. Related Project: - Manufacturing of Wheat Starch & Gluten Key Players Cargill India Pvt. Ltd. Gayatri Bioorganics Ltd. Laxmi Starch Ltd. Peacock Allied Products Pvt. Ltd. Pioneer Industries Pvt. Ltd. R A Starch Processors Pvt. Ltd. Roquette India Pvt. Ltd. Sanstar Ltd. Sayaji Industries Ltd. Shubham Starch Chem Pvt. Ltd. Spac Starch Products (India) Ltd. Tirupati Starch & Chemicals Ltd. Universal Starch-Chem Allied Ltd. Projects:- Project Reports & Profiles Tags:- #wheat #bakery #confectionery #WheatStarch #WheatStarchProducts #WheatStarchManufacturing #WheatStarchProduction #WheatStarchMarket #WheatGluten #WheatGlutenManufacturing #WheatGlutenProduction #WheatGlutenBusiness #WheatGlutenMarket #Wheat #WheatManufacturing #WheatProduction #WheatBusiness #WheatIndustry #GrainIndustry #WheatMarket #StarchMarket #ModifiedStarches #NativeStarches #WheatBusiness #NewRelease #InvestInStartups #Plan4Business #StartupPlan #HowToMakeYourBusinessMoreSuccessful #investorbusiness #Startupcapital #BusinessPlanning #StartupIdea #DetailedProjectReport #businessconsultant #BusinessPlan #feasibilityReport #NPCS #projectreport #projectconsultant #InvestmentOpportunities #howtostartbusiness
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Roll Forming with Metal Beam, Highway Guard Crash Barrier and Galvanizing Plant

Roll Forming with Metal Beam, Highway Guard Crash Barrier and Galvanizing Plant. Best Industry for Starting Your Own Business. Roll forming is a continuous metal forming process taking sheet, strip, or coil stock and bending or forming it to a continuous cross section. The process is performed between successive pairs of rolls that change the shape until the desired section is completed. Some of these barriers, designed to be struck from either side, are called median barriers. Traffic barriers can also be used to protect vulnerable areas like school yards, pedestrian zones, and fuel tanks from errant vehicles. Related Projects:- Industrial & Engineering Products While barriers are normally designed to minimize injury to vehicle occupants, injuries do occur in collisions with traffic barriers. They should only be installed where a collision with the barrier is likely to be less severe than a collision with the hazard behind it. Where possible, it is preferable to remove, relocate or modify a hazard, rather than shield it with a barrier. Roll Forming in Construction In the construction industry, roll forming offers creative solutions to diversify equipment capabilities. Whether consolidating HVAC components to eliminate assembly or redesigning a product to cut wastes, roll forming delivers. This metal fabrication process excels at reducing weight, decreasing costs and simplifying production in the most challenging fabrication projects, including: Crane. Electrical. Elevators and escalators. Garage doors. HVAC. Ladders and scaffolding. Security. Windows and doors. Books:- BOOKS & DATABASES Market Outlook The roll forming machines market has been witnessing significant technological advances over the last few years. Technological advances such as the emergence of automated servo-electric roll forming machines are aiding the metal forming industry to simplify its metal forming process, and ensure a high level of security. The modern robotic roll forming machines make use of control units and sensor technology for quality control and tools changeovers. Thus, the technological advances in roll forming machine will fuel the growth of the market. Related Videos:- Industrial & Engineering Products, Manufactured Goods, Mechanical, Automobile, Metal, Metallurgical, Wire, Aluminum, Copper Products Roll forming is a type of rolling involving the continuous bending of long strips of sheet metal which are typically coiled steel into any desired cross-section. In roll forming machines the metal strips which are to be formed into desired shapes are passed through sets of rolls mounted on consecutive stands, where each set only performs an incremental part of the bend, till the desired cross-section is obtained. Roll forming machines are ideal for large quantities, producing constant-profile parts with long lengths. Roll forming machines are available in different sizes, shapes, and material thickness. Roll forming machine achieves variations in size by making the distance between the rolls variable by computerized or manual adjustments which allows rapid changeover. The portable based roll forming machines has been bringing metal roof manufacturing to the job site making it easy for the requirements. On site roll forming machines eliminates shipping damages many size errors and short shipments and provides freight and packaging savings. Related Project: Roll Forming with Metal Beam, Highway Guard Crash Barrier and Galvanizing Plant The global roll forming machines market size will grow by USD 121.56 million during 2019-2023. Roll forming machines are extensively used to make components such as rocker panels, bumpers, door beams, crash tubes, and other components, which are commonly used in the automotive industry. Roll forming machines are used because they can develop components with high tensile strength. Based on application market is segmented into Automotive industry, Manufacturing industry, Construction industry. Projects:- Project Reports & Profiles Government Initiatives Some of the recent Government initiatives are as follows: • In April 2020, the Government set a target of constructing roads worth Rs 15 lakh crore (US$ 212.80 billion) over the next two years. • In May 2020, Border Roads Organisation (BRO) achieved major milestone by digging up a 440-metre long tunnel below the busy Chamba town on Rishikesh-Dharasu highway (NH 94). • The Ministry of Road Transport & Highways is expected to award road projects with a total length of around 4,500 kms worth Rs 50,000 crore (US$ 7.15 billion) in 2020. • To widen and revamp 1.25-lakh km of roads, Government of India has approved the launch of Phase-III of its rural road programme Pradhan Mantri Gram Sadak Yojana (PMGSY). PMGSY-III is envisaged to upgrade 1,25,000 kms of road length over the next five years at an estimated cost of Rs 80,250 crore (US$11.48 billion). • Under the Union Budget 2020-21, the Government has allocated Rs 91,823 crore (US$ 13.14 billion) under the Ministry of Road Transport and Highways. • Under the Union Budget 2020-21, 30,000 km of PMGSY roads have been built using Green Technology, Waste Plastic and Cold Mix Technology, thereby reducing carbon footprint. Related Projects:- Engineering Goods Projects Achievements Following are the achievements of the Government in the past four years: • As on December 2019, 824 projects were recommended for development by the Public Private Partnership Appraisal Committee (PPPAC). • A total of 65,000 km of roads and highways are to be constructed under BharatmalaPariyojana. • In the month of December 2018, the Ministry of Road Transport and Highways (MoRTH) touched a record 31.87 km per day average of national highway construction. • Market Research:- Market Research Report Market Research:- Market Research Report Road Ahead The Government, through a series of initiatives, is working on policies to attract significant investor interest. A total of 200,000 km of national highways is expected to be completed by 2022. Key Players:- Alcatel-Lucent India Ltd. Arcelormittal Nippon Steel India Ltd. Arcelormittal Projects India Pvt. Ltd. Arjas Steel Pvt. Ltd. Bekaert Industries Pvt. Ltd. Belmaks Solutions Pvt. Ltd. G R Infraprojects Ltd. Jindal Steel & Power Ltd. Nippon Steel & Sumitomo Metal India Pvt. Ltd. Nirmal Overseas Ltd. Omnitech Industries Ltd Pennar Industries Ltd Posco India Pvt. Ltd. Shyam Steel Inds. Ltd. Steel Authority Of India Ltd. System Engineers Cutting & Welding Pvt. Ltd. Tata Steel Ltd Tenova India Pvt. Ltd Utkarsh India Ltd. Visa Steel Ltd Related Project: Roll Forming with Metal Beam, Highway Guard Crash Barrier and Galvanizing Plant Tags:- #RollForming #Metal #Metalbeam #HighwayGuardCrashBarrier #GalvanizingPlant #GalvanizingPlantInIndia #HotDipGalvanizingPlant #DetailedProjectReport #BananaPowderManufacturing #Bananapowdermanufacturingunit #BananaProcessingBusiness #DemandForBananaProducts #BananaProducts #StartupBusinessPlan #startupinvestment #startup #InvestInStartups #BusinessPlan #feasibilityReport #NPCS
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of Refined Oil (Cotton Seed, Ground Nut & Sunflower Oil).

Production of Refined Oil (Cotton Seed, Ground Nut & Sunflower Oil). Awesome Startup Opportunities for Entrepreneurs. Vegetable oils, or vegetable fats, are oils extracted from seeds, or less often, from other parts of fruits. Like animal fats, vegetable fats are mixtures of triglycerides. Soybean oil, grape seed oil, and cocoa butter are examples of fats from seeds. Olive oil, palm oil, and rice bran oil are examples of fats from other parts of fruits. In common usage, vegetable oil may refer exclusively to vegetable fats which are liquid at room temperature. Vegetable oils are usually edible; non-edible oils derived mainly from petroleum are termed mineral oils. Related Projects:- Edible Oils Projects Cottonseed oil is a commonly used vegetable oil that’s derived from the seeds of cotton plants. A whole cotton seed contains about 15 to 20 percent oil. Sunflower oil is the non-volatile oil pressed from the seeds of sunflower (Helianthus annulus). Sunflower oil is commonly used in food as a frying oil, and in cosmetic formulations as an emollient. The world's total production of sunflower oil in 2014 was nearly 16 million tonnes, with Ukraine and Russia as the largest producers. Sunflower oil is well known because of its diversity of fatty acids profiles which allow different uses (food: dressing salads, margarines; nonfood: agro fuel, lubricants). Besides, crude oil contains high amounts of desirable minor components (tocopherol, phytosterols, polyphenols, phospholipids...) that present important nutritional features with a positive impact on human health. The different steps of the refining process have as main objective to remove contaminants and other compounds that could hamper the continuity of the process or alter oil during storage. An indirect consequence of this treatment used to preserve food safety is that micronutrients of interest are also partially eliminated reducing the nutritional quality of the oil. Related Books:- Oils And Fats Production and Refining Process of Vegetable Oil: Oil extraction by traditional methods often requires various preliminary operations, such as cracking, shelling, dehulling, etc., after which the crop is ground to a paste. The paste, or the whole fruit, is then boiled with water and stirred until the oil separates and can be collected. Such traditional methods have a low rate of efficiency, particularly when performed manually. Oil extracted by pressing without heating is the purest method and often produces an edible product without refining. Related Videos:- Oils and Fats Modern methods of oil recovery include crushing and pressing, as well as dissolving the crop in a solvent, most commonly hexane. Extracting oil with a solvent is a more efficient method than pressing. The residue left after the removal of oil (oilcake or meal) is used as feedstuff. First, the vegetables are crushed to extract the oil. The crushed mixture is then heated and mixed with hexane, a chemical which helps to extract the remaining oil. The solids are removed and used for animal feed, and the hexane is distilled from the crude oil. Related Project:- Refined Oil(Cotton Seed Oil, Ground Nut Oil & Sunflower Oil) The refining process consists of three steps: refining, bleaching, and deodorizing (RBD). Refining: The oil is treated with phosphoric acid, which causes the gums to separate from the oil so they can be filtered out. The oil is then treated with caustic soda, which reacts with the unwanted free fatty acids (FFA) turning them into soap; the soap is separated from the oil. Bleaching: The oil is heated and mixed with filter aids, such as diatomaceous earth and clay. These filter aids absorb the coloring and other impurities in the oil. The oil is then filtered to remove the filter aids together with all the impurities. Deodorizing: The oil is heated under a vacuum to about 480° Fahrenheit. Steam bubbles through the oil, removing the remaining free fatty acids and impurities. Market Outlook The edible oil segment is currently undergoing a metamorphosis as a result of spiraling prices of soft oils – sunflower and Soyabean. Premium branded vegetable oil makers are expanding their product portfolio to include less-up market oils from cottonseed, groundnut or even palmolein in consumer packs. Books:- BOOKS & DATABASES The food applications is the largest application for vegetable oil and while the non-food (industrial) applications market will continue to be the fastest growing market mainly due to the biodiesel sector. The biodiesel feedstock market is the second largest revenue generator for vegetable oil, contributing approximately 13% of the total vegetable oils market. Major vegetable oils that find commercial applications include palm oil, castor oil, soybean oil, and sunflower oil. Sunflower oil emerged as a major product segment in the vegetable oil market on account of its health benefits such as cardiovascular benefits, helps in preventing arthritis, asthma, and colon cancer. The market has thus been gaining importance as a major health care product as it helps in cell structure repair apart from the aforementioned benefits. Stringent biofuel policies in Europe and the U.S. over the accessibility of soybean oil have diverted this market towards other vegetable oils such as palm, palm kernel, and sunflower oils. Related Videos:- Essential Oils, Edible Oils, Phytochemicals, Aromatic Chemicals, Aromatic Compounds, Spice Oils and Oleoresins Projects Vegetable oil is plant or vegetable derived oil that is in liquid state in room temperature. It is a plant extracted triglyceride. Vegetable oils that are solid in room temperature are known as vegetable fats. Primarily, oil is extracted from plant seeds, although they can be derived from other plant or vegetable parts as well. The edible oil market in India is projected to grow from around $21.5 billion in 2019 to $35.2 billion by 2025 due to increasing disposable income and rising consumer awareness about healthy lifestyle & wellness. The global edible oil market is anticipated to witness a substantial growth owing to increasing popularity of unrefined, unprocessed, healthy, and organic oil. In the coming years, vegetable oils with low cholesterol, fat, and calories are likely to gain high response due to growing health awareness among people across the world. In addition, major improvement in retail network, increasing crop yields, oil production, and growing economies are some of the prominent factors supporting the growth of the global edible oil market. Furthermore, growing popularity of canola oil, trans-fat free soybean oil, and emerging preference for olive oil will drive the global market for edible oil. Projects:- Project Reports & Profiles Key Players:- Adani Wilmar Ltd. Agarwal Industries Pvt. Ltd. Ambar Protein Inds. Ltd. Atul Oilcake Inds. Ltd. Bunge India Pvt. Ltd. Cargill Foods India Ltd. Chakan Vegoils Ltd. Geeta Refinery Pvt. Ltd. Growmore Solvent Ltd. Louis Dreyfus Co. India Pvt. Ltd. M K Agrotech Pvt. Ltd. Poshak Oils & Fats Ltd. Prudential Sri Jagannath Agro-Tech Ltd. Raghunath Cotton & Oil Products Ltd. Shri Sainath Proteins Ltd. Project: - Refined oil (Cotton seed, Ground Nut Oil & Sunflower Oil) Tags:- #RefinedOil #RefinedOilProduction #RefinedOilMarket #CookingOil #EdibleOil #GroundnutOil #SunflowerOil #CottonseedOil #Vegetableoil #VegetableOilMarket #VegetableOilMarketForecast #RefinedOilBusiness #GroundnutOilBusinessPlan #SunflowerOilBusinessPlan #CottonseedOilBusinessPlan #VegetableoilBusinessPlan #RefinedOilProjectReport #RefinedOilProject #GroundnutOilManufacturing #SunflowerOilProduction #CottonseedOilManufacturing #VegetableoilProduction #DetailedProjectReport #businessconsultant #feasibilityReport #NPCS #entrepreneurindia #startupbusiness #BusinessPlan #InvestInStartups #StartupIdea #startupinvestment #StartupBusinessPlan #StartupPlan #NewRelease #InvestInStartups #ProjectReport
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Investment Opportunities in BLDC (Brushless DC Motor) Fan

Investment Opportunities in BLDC (Brushless DC Motor) Fan. Manufacturing Business of Ceiling Fan-Energy Efficient. A brushless DC electric motor (BLDC motor or BL motor), also known as electronically commutated motor (ECM or EC motor) and synchronous DC motors, are synchronous motors powered by DC electricity via an inverter or switching power supply which produces an AC electric current to drive each phase of the motor via a closed loop controller. The controller provides pulses of current to the motor windings that control the speed and torque of the motor. A brushless DC electric motor (BLDC motor or BL motor), also known as electronically commutated motor (ECM or EC motor) and synchronous DC motors, are synchronous motors powered by direct current (DC) electricity via an inverter or switching power supply which produces electricity in the form of alternating current (AC) to drive each phase of the motor via a closed loop controller. The controller provides pulses of current to the motor windings that control the speed and torque of the motor. This control system replaces the commentator (brushes) used in many conventional electric motors. Related projects:- Electrical, Electronic Industries and Power Projects The construction of a brushless motor system is typically similar to a permanent magnet synchronous motor (PMSM), but can also be a switched reluctance motor, or an induction (asynchronous) motor. They may also use neodymium magnets and be out runners (the stator is surrounded by the rotor), in runners (the rotor is surrounded by the stator), or axial (the rotor and stator are flat and parallel). For years, ceiling fans used to come with the same hardware of induction motor which typically consumed 70-80 watts for a standard ceiling fan. But in the last few years, a new technology called BLDC is being used to make fans consume a lesser amount of energy, without compromising much on the air delivery. BLDC stands for brush-less direct-current motor, a special type of motor which has permanent magnet instead of electromagnets found in a conventional induction motor. BLDC motor has important advantages over induction motor like low electricity consumption, lesser noise generation and better lifespan. Books:- BOOKS & DATABASES Advantages of BLDC Ceiling Fans: A brushless DC motor (known as BLDC) is a magnet synchronous electric motor that is driven by electrical energy. The electronics contain a driving algorithm that drives the BLDC motor. BLDC motor the position of magnets within the fan is perceived by natural philosophy that either uses a Hall impact sensing element or back voltage. Modern BLDC motors use Back voltage for commutation thanks to tested disadvantages of hall impact sensing element over the amount of your time. BLDC fans take in AC voltage and internally converts it into DC victimization SMPS. The main distinction between BLDC and standard DC fans is that the commutation technique. Related Videos:- Electrical, Electronic Industries and Power Projects Ceiling fans unremarkably runs throughout night normally, the temperature at nighttime’s is way above temperature within the morning. BLDC motor has an external armature called the stator, and an internal armature (permanent magnet) called the rotor. BLDC motors supply many benefits over brushed DC motors, as well as higher potency and responsibility, reduced noise, longer time period (no brush and commentator erosion), elimination of ionizing sparks from the commentator, more power, and overall reduction of magnetism interference (EMI). As mentioned earlier during a BLDC motor the position of magnets within the fan is perceived by physics that either uses a Hall result sensing element or back voltage. Related Project:- Brushless DC Motor (BLDC) Fan Production BLDC Ceiling Fans are power-saving fans with low power consumption than the normal ceiling fans The physics contains a driving rule that drives the BLDC motor. Remote Controlled Operation High Air Delivery 220 CMM with thirty-two Watt power consumption at the highest speed 360 rates. Super economical Brushless DC technology Power consumption of solely 30W, even at most air delivery of 230 CMM. 5-speed management victimization device. BLDC Ceiling Fan Market Report categorizes the market price by manufacturers, Regions, Types, and Applications. Projects:- Project Reports & Profiles BLDC Ceiling fan is specially designed for Domestic and Industrial applications with an hour less power consumption as compared to Induction motors. It consumes solely thirty-one Watt Power. Buying bldc fans may cost less than 3 months of electricity bill. Market Outlook The market is segmented by end user into domestic and commercial, out of which, commercial segment is anticipated to hold the largest market share owing to the increasing application of BLDC fan in varied end user application, such as in cooling systems, computer peripherals, medical devices, robotics, and others. Moreover, increasing demand for small and compact DC fans in electrical equipment across different industry verticals are some of the factors anticipated to drive the growth of the commercial segment in the global BLDC fan market. Regionally, the global BLDC fan market is segmented into five major regions including North America, Europe, Asia Pacific, Latin America and Middle East & Africa region. Among these regions, the Asia Pacific BLDC fan market is anticipated to hold the largest market share on the back of presence of a manufacturing hub of industrial electronic equipment in nations, such as China, Japan, Vietnam and India. Moreover, increasing demand for cooling solutions for domestic applications in these nations owing to the presence of have high temperature that ranges up to 55°C during summers are some of the factors anticipated to drive the growth of the BLDC fan market in Asia Pacific. Market Research:- Market Research Report The global BLDC fan market is segmented by end user into domestic and commercial. Out of these segments, the commercial segment is anticipated to hold the largest market share on the back of growing application of BLDC fan across a range of end user application, ranging from cooling systems, computer peripherals, medical devices, robotics, and others, coupled with the rising demand for small and compact DC fans in electrical equipment across different industry verticals. The global BLDC fan market is anticipated to record a significant CAGR throughout the forecast period, i.e. 2020-2028. Increasing demand for cooling systems across varied end user applications, growing need amongst end user industries for advanced technological products that are more efficient and effective and consume less energy, along with the increasing trade on fans around the world is also anticipated to promote significantly towards the growth of the global BLDC market. Related Project:- Brushless DC Motor (BLDC) Fan Production Growing Demand for Energy-Efficient Electrical Fans Modern industrial equipment are designed sophistically and have complicated cooling systems. As such, there is a rising demand for cooling systems that are compact and are also energy-efficient. BLDC fan are designed in such a way that they are compact in its size as compared to conventional fans. These fans are also known to have greater air delivery speeds by consuming less energy in comparison to conventional fans. Hence, BLDC fans are widely used across a varied end user industries and applications, which is anticipated to drive the growth of the global BLDC fan market. Projects:- Project Reports & Profiles Growth in the housing sector is boosting the demand for ceiling fans, especially in the developing economies. For instance, the governments of China and India are coming up with new schemes to provide shelter to the low- and middle-income groups. The development in the commercial real estate, hospitality and retail sectors are bolstering the market growth. The demand for ceiling fans has been rapidly increasing due to rising income levels of the consumers and increasing availability of electricity. Manufacturers are introducing premium products such as lighting fans, decorative fans, etc. which offer higher margins, thereby increasing their profitability. Key Players Advanced Appliances Pvt. Ltd. Delco Fans Pvt. Ltd. Goa Electricals & Fans Ltd. Jiwa Appliances Ltd Kedia Soft Solutions Ltd. Khaitan Electricals Ltd Khaitan Fans (India) Ltd. Nicotra India Pvt. Ltd. Omnia Appliances Pvt. Ltd. Orient General Inds. Ltd. Parag Fans & Cooling Systems Ltd. Polar Fan Inds. Ltd. Polar Industries Ltd Rallis Machines Ltd. Reitz India Ltd Remi Engineering Fans Ltd. Sheffield Appliances Ltd Tags:- #BLDCFan #BLDCFanManufacturing #BLDCFanProduction #BLDCFanBusiness #CeilingFan #CeilingFanBusiness #BLDCFanMarket #BrushlessDCMotor #BLDC #BLDCCeilingFans #EnergyEfficiency #DetailedProjectReport #businessconsultant #NPCS #entrepreneurindia #startupbusiness #BusinessPlan #ProjectReport #InvestInStartups #StartupIdea #startupinvestment #StartupBusinessPlan #StartupPlan #NewRelease #HowToMakeYourBusinessMoreSuccessful
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing of DCDA - Dicyandiamide (2-Cyanoguanidine).

Manufacturing of DCDA - Dicyandiamide (2-Cyanoguanidine). Active Pharma Ingredient (API). Profit-Making Industry for Startups in Pharmaceutical. Dicyandiamide is often used as a curing agent for epoxies and as a used as a stabilizer compound for PVC flooring. Another popular use of Dycyandiamide (DICY) is a flame retardant additive in the paper and textile industries. Dicyandiamide can be used as a slow release fertilizer. Dycandiamide also finds applications in the adhesive industry, powder coatings, dielectric coatings, water treatment chemicals, rubber, dye fixing, and pharmaceutical applications. Related Project: - Dicyandiamide (dcda) Application Dicyandiamide is used as a slow release fertilizer. In the adhesive industry, Dicyandiamide is used as a curing agent for epoxies. Dicyandiamide is also used as a flame retardant additive in paper and textile industries. Additional applications include use in powder coatings, dielectric coatings, water treatment chemicals, rubber, dye fixing, and pharmaceutical applications. Dicyandiamide is also used as a stabilizer compound for PVC flooring. Projects: - Project Reports & Profiles Uses:- Adhesive-General adhesives and binding agents for a variety of uses Agricultural-Relating to agricultural, including the raising and farming of animals and growing of crops Building_material, insulation-Insulating materials to protect from noise, cold, etc (such as used in homes or buildings), insulating materials related to electricity. Related Projects: - Active Pharmaceutical Ingredient (API) Products, Bulk API Manufacturing Colorant-Term used for colorants, dyes, or pigments; includes colorants for drugs, textiles, personal care products (cosmetics, tatoo inks, hair dye), food colorants, and inks for printing; modifiers included when application is known Construction-General construction (as opposed to those things labeled building construction) Market Outlook Dicyandiamide Market size should observe lucrative CAGR from 2019 to 2025 in the coming years due to developments in the water treatment industry. Dicyandiamide or cyan guanidine is a free-flowing white colored versatile chemical with diverse applications. Extensive use of the product in wastewater treatment plants as a decoloring agent or flocculating agent will drive the market in coming years. Growth in wastewater treatment industry in the European countries will have significant impact on the dicyandiamide market. Related Projects: - Business Ideas after the Covid Breakdown The region has more than 18,000 wastewater treatment plants in operation. As the region’s major focus is sustainable development and to promote environment friendly products & techniques, the demand for dicyandiamide will rise in future. Moreover, the rising scarcity of clean water will lead to increasing water treatment facilities in emerging nations which will further boost the demand in the market. Related Books: - Pharmaceutical, Drugs, Proteins Technology Handbooks The factors that are playing a major role in the growth of dicyandiamide market are the growing number of diabetes patients, non-hazardous and extremely reactive, and the high demand from the end-users. However, the availability of alternative substitutes may restrain overall market growth in the years to come. Dicyandiamide market is segmented based on grade, distribution channel, application, and region. Related Projects: - Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates, Pharmaceutical Drugs Global Dicyandiamide Market: Segmentation The global dicyandiamide market can be divided based on grade and application. On the basis of grade, the market is segmented into pharmaceutical, electronic, and industrial segments. Based on the application, the dicyandiamide market is divided into pharmaceuticals, epoxy laminates, slow-release fertilizers, flame retardants, dye fixing, and water treatment sectors. Related Videos: - Pharmaceutical, Drugs, Fine Chemicals, Bulk Drug Intermediates Key Players:- Helm India Pvt. Ltd. Lok Chemicals Pvt. Ltd. Prakash Chemicals Agencies Pvt. Ltd. Sanjay Chemicals (India) Pvt. Ltd. Unicare Pharma Ltd. Books: - BOOKS & DATABASES Tags:- #Dicyandiamide #DicyandiamideBusinessPlan #DicyandiamideManufacturing #DicyandiamideProduction #DicyandiamideInvestment #DicyandiamideMarket #DicyandiamideBusienss #apimanufacturing #pharmaceuticalindustry #chemicalindustry #pharmaceuticalmanufacturing #ActivePharmaceuticalIngredient #api #activepharmaceuticalingredient #pharmaceutical #ActivepharmaceuticalingredientMarket #ActivePharmaceutical #DCDAmanufacturing #DCDA #DetailedProjectReport #businessconsultant #feasibilityReport #NPCS #BusinessPlan #startup #InvestInStartups #entrepreneurindia #businessconsultant #StartupIdeas #NewRelease
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

N95 Mask (5 Ply)

An N95 Mask is a type of Mask with air-purifying, particulate respirator which is a personal protective device designed to help reduce the wearer's inhalation exposure to certain airborne particles. N95 Masks are certified by a US body named NIOSH (National Institute for Occupational Safety and Health). They are masks that fit on the nose and mouth to prevent bacteria and dust particles. They came in different shapes and sizes. N95 Masks are also known as an N95 Respirator Mask, N95 Particle Respirator, N95 Filter Mask, N95 protection mask. To prevent spread of airborne respiratory infection such as COVID-19, wearing of masks or filtering face piece (FFP) respirators are advised. The masks can be simple cloth masks (which can be worn by members of public or outside the high-risk areas), surgical masks which are loose-fitting disposable devices that prevent entry of large size droplets that may contain micro-organisms, and N95 FFP respirators. The most important component of PPE for HCWs during this pandemic is the N95 FFP respirator. The India surgical mask market was valued at $71.73 million in 2019, and is expected to reach $157.13 million by 2027, registering a CAGR of 10.3% from 2020 to 2027. This growth rate is mainly attributed to number of surgical procedures performed in India annually. The country is currently facing a multifaceted burden of infectious disease, neonatal disease, non-communicable diseases, maternal disease, and injuries. The need for surgical products and services in India is expected to continue to rise noticeably from now until 2030. Thus, this overall increase in the number of surgical procedures performed in India is projected to bolster the demand for surgical products such as masks and gloves in the years to come, ultimately driving the growth of the India surgical masks market. Likewise, surgical masks, are being widely used to prevent the transmission of infections and maintain hygiene, as they are sterile, repellant, and do not absorb any bacteria & viruses. Patients and healthcare professionals are susceptible to hospital-acquired infections (HAIs) during medical treatments in a healthcare facility. Thus, this increase in HAIs is further supplementing the India surgical masks market growth. India surgical masks market on the basis of product, distribution channel and sales channel. Based on product, the market is categorized into basic surgical mask, anti-fog surgical mask, fluid/splash-resistant surgical mask, and N95 mask. Based on distribution channel, the market is divided into hospitals & clinics, drug stores and online stores. Based on sales channel, the India surgical masks market is classified into business to business, business to customer and business to government. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under 3M India Ltd. Good Health Insurance T P A Ltd. Kimberly-Clark India Pvt. Ltd. Mediklin Healthcare Ltd. Surgeine Healthcare (India) Pvt. Ltd.
Plant capacity: N95 Mask 5 Ply (5 pcs per Pkt.): 12,096 Pkts / DayPlant & machinery: Rs 47 lakhs
Working capital: -T.C.I: Cost of Project: Rs 350 lakhs
Return: 30.00%Break even: 52.00%
Add to Inquiry Add to Inquiry Basket

Disposable Plastic Syringes

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized condition, ready to use, and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. The constantly increasing use of this type Syringe indicates its importance which is based mainly on the advantages it offers regarding cost and hygienic applications. The manufacture of plastic syringes has been developed to such a degree that the products now satisfy the requirements and standards set by Hospital and physicians. At the same time they offer the best possible technique of application to the physician and the highest possible degree of safety to the patient. A syringe is a simple piston pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (the barrel) allowing the syringe to take in and expel a liquid or a gas through an orifice at open end of the tube. The open end of the syringe may be fitted with a hypodermic needle (a hollow needle commonly used with a syringe to inject substances into the body or extract fluids from it), a nozzle or tubing to help direct the flow into and out of the barrel. Disposable Syringes are being used by doctors to inject medicines through intravenous or intramuscular ways for the treatment of diseases & also by research & development personnel. Disposable syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized condition, ready to use, and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. The Disposable Syringes market was valued at USD 7.10 billion in 2019 and is predicted to grow at a CAGR of 6.1% during the forecast period and is anticipated to reach USD 12.91 Billion by 2027. The growth of the market is attributed to growing prevalence of chronic diseases, especially diabetes, an increase in the usage of Botox, increased adoption of inject able drugs, technological advancements in syringes, an increase in the geriatric population, a growing number of vaccination and immunization programs. Based on the WHO estimates, 16 billion injections are administered each year globally. A Disposable Syringes is a medical tool used to administer injections of intravenous drugs into the patient’s blood stream or to draw blood sample. Consumers and doctors are preferring Disposable Syringes over reusable syringes due to rising concerns about needle stick injuries and accidental infections related to it. Industry players increasingly investing in research and development of new chemicals that are more potential than present available drugs is likely to augment the growth. This facilitates the development of new technologies and ensures a high quality product. Few Indian major players are as under Disposable Medi-Aids Ltd. Hindustan Syringes & Medical Devices Ltd Lifelong Meditech Ltd. Peekay Mediequip Ltd. Schott Kaisha Pvt. Ltd.
Plant capacity: Disposable Plastic Syringes 3 ml Size: 1,440 Boxes / Day (Each Box = 100 Pcs) Disposable Plastic Syringes 5 ml Size: 1,500 Boxes / Day (Each Box = 100 Pcs) Disposable Plastic Syringes 10 ml Size: 600 Boxes / Day (Each Box = 100 Pcs)Plant & machinery: Rs 340 lakhs
Working capital: -T.C.I: Cost of Project : Rs 772 lakhs
Return: 18.00%Break even: 62.00%
Add to Inquiry Add to Inquiry Basket

Blood Collection Tubes (Vacutainer)

A vacutainer blood collection tube is a sterile glass or plastic test tube with a colored rubber stopper creating a vacuum seal inside of the tube, facilitating the drawing of a predetermined volume of liquid. Vacationer tubes may contain additives designed to stabilize and preserve the specimen prior to analytical testing. Tubes are available with a safety-engineered stopper, with a variety of labeling options and draw volumes. The color of the top indicates the additives in the vial. A vacuum blood collection tube is a sterile glass or plastic test tube that uses a stopper to create a vacuum seal inside the tube and enable the depiction of a predetermined volume of liquid. The vacuum blood collection tube prevents needle stick damage by preventing needles from coming in human contact and thus, contamination. The vacuum blood collection tube contains a double pointed needle, attached to a plastic tubular adapter. Double pointed needles are available in many gauge sizes. The length of the needle ranges from 1 to 11/2 inches. Vacuum blood collection tubes may contain additional constituents which are used to preserve blood for treatment in a medical laboratory. These additives are in the form of films applied using an ultrasonic nozzle. The additives contained in the vacuum blood collection tube are anticoagulants, such as EDTA, sodium citrate, heparin or gel. A vacuum blood collection tube is mostly used by clinics and laboratories for storing blood for future testing. Vacuum blood collection tubes have a substitute which can preserve blood for an extended period for testing processes. Vacuum blood collection tubes are available in different types of sizes and specimens. Blood Collection Tubes Market size is estimated to reach $2.81bn by 2025, growing at a CAGR of 7.1% during the forecast period 2020-2025. Blood plays an important role in the diagnosis and treatment of many diseases. The blood processing includes the collection, storing and managing the blood after collected from the donor. The blood collection tubes which are also known as vacutainers are made of either plastic or glass, these tubes are sterilized and have a safety-engineered stopper with different labeling options with the volume on it and color of the caps indicates the additives in the tube. The increase in usage of blood samples in the diagnosis and requirement of blood components in the treatment of many diseases is driving the market for blood collection tubes during the forecast period 2020-2025. The COVID-19 pandemic has encouraged major market players to focus on the development of new innovative products for blood glucose monitoring. For instance, in May 2020, Dario Health Corp. announced that the FDA has approved the use of self-test blood glucose meters by hospitalized patients with diabetes. This was intended to limit the exposure to the COVID-19 virus by self-checking of blood glucose levels by hospitalized patients and providing information to healthcare personnel. Entrepreneurs who invest in this project will be successful. Few Indian major players are as under Becton Dickinson India Pvt. Ltd. Hindustan Syringes & Medical Devices Ltd Kriya Medical Technologies Pvt. Ltd. Narang Medical Ltd. Poly Medicure Ltd.
Plant capacity: Blood Collection Tubes (Vacutainer) 13x100 with EDTA: 96,000 Nos / Day Blood Collection Tubes (Vacutainer) 13x75 Plain : 96,000 Nos / DayPlant & machinery: Rs 464 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1105 lakhs
Return: 29.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 178 of 249 | Total 2486 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 178 248 249   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top