REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Meghalaya- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

 

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 213 of 263 | Total 2626 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 213 262 263   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Emerging Business Opportunities in Production of Milk Powder (Baby Milk for 0 to 5 year, Milk Powder for Coffee and Tea).

Powdered milk is made by eliminating the water from milk and evaporating it to dryness. Spray drying is the most common method of producing powdered milk, which is a manufactured dairy product. After raw milk has been pasteurized, it is sprayed dry. It's then cooked, evaporated, then heated again to get a concentrated milk solids combination. After that, the mixture is sprayed into a heated chamber, where it is reduced to fine particles. Milk's capacity to revert to its former state when rehydrated with water is due to this atomized process. Milk is frequently dried again after the spray drying process to ensure that any remaining moisture is eliminated before packaging. It is then shipped to a variety of destinations, including grocery stores, emergency food warehouses, and countries with limited access to fresh milk. Powdered milk is commonly used in the production of newborn formula, confectionary like chocolate and caramel candy, and baked goods recipes where liquid milk would make the result too thin. Powdered milk is also used in a variety of sweets, including the famous Indian milk balls known as gulab jamun and the iconic Indian sweet treat known as chum chum (sprinkled with desiccated coconut) (made with skim milk powder). Powdered milk is used in many no-cook nut butter recipes to keep the nut butter from turning liquid by absorbing the oil. • Milk powder contains nearly the same amount of proteins (26%) and carbs (37%) as liquid milk, however the water content is reduced to just 3%. However, depending on the commercially accessible brand, the fat percentage ranges from 25 to 28 percent. • Casein, a milk protein, is supposed to activate the entire body and aid muscle protein production. • Vitamins A and D are also added to milk powder. Vitamin A aids in the creation of bones, whereas Vitamin D aids in the improvement of vision. Both vitamins are essential for the preservation and repair of skin. • It contains calcium, which aids in the growth and preservation of teeth and bones throughout life. Breastfeeding is sometimes medically contraindicated. These are some of them: • Health of the mother: The mother is HIV-positive or suffers from active TB. She is very sick or has undergone some types of breast surgery that may have removed or severed all of the breast's milk-producing components. She is using any medicine that could harm the baby, including both prescription and illicit drugs like cytotoxic chemotherapy for cancer treatment. • Breastfeeding is not possible for the baby: Breastfeeding is difficult or impossible for the infant due to a birth abnormality or inborn metabolic error such as galactosemia. • Baby is at risk of malnutrition: Infants may be at risk of malnutrition in certain circumstances, such as iron deficiency, vitamin deficiencies (e.g., vitamin D, which may be less present in breast milk than needed at high latitudes with less sun exposure), or inadequate nutrition during the transition to solid foods. Improved diet and knowledge of moms and caregivers, as well as the availability of macro and micronutrients, can often decrease risks. • Food allergies: The mother consumes foods that may cause the infant to have an allergic reaction. • Financial constraints: Maternity leave is either underpaid, insufficient, or not available. Breastfeeding is hampered by the mother's job. Breastfeeding mothers may see a decrease in their earning ability. From 2018 to 2025, the global milk powder market is expected to increase at a CAGR of 4.4 percent, from $27,783.3 million in 2017 to $38,086.1 million in 2025. Milk powder is a dry dairy product made by evaporating milk to dehydrate it. Making milk powder has the goal of extending the shelf life of milk without the need of a refrigerator. Whole milk powder, skimmed milk powder, dairy whitener, and various varieties of milk powder are available. It is commonly consumed around the world due to its nutritional benefits, and it has been used in infant formulae, confectionaries, baked pastries, and savoury dishes. The global milk powder market is driven by factors such as an increase in the usage of milk powder in infant foods and the availability of many nutrients such as vitamin C, vitamin B12, thiamin, and high levels of protein. Furthermore, the milk powder business is growing due to lower storage and transportation costs. The inclusion of preservatives, adulteration, and tight infant food rules, on the other hand, limit the expansion of the milk powder business. The development of flavoured milk powder has opened up new commercial potential. Dehydrating milk by roller drying and spray drying produces milk powder. Milk powder is made from several types of milk, which defines the composition of the powder. Whole milk powder, skimmed milk powder, dairy whitener, buttermilk powder, fat-filled milk powder, and others make up the milk powder market, according to the research. Many consumers believe that whole milk is the most natural kind of milk, but it is less popular among individuals who are concerned about their weight or who are on a particular diet. Key Players: 1. D S P I Milk Foods Ltd. 2. Haryana Milk Foods Ltd. 3. Herman Milkfoods Ltd. 4. K K Milk Fresh India Ltd. 5. Kamdhenu Foods Ltd. 6. Kwality Ltd. 7. Markandeshwar Foods & Allied Products Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Emerging Business Opportunities in Production of Milk Powder (Baby Milk for 0 to 5 year, Milk Powder for Coffee and Tea).

Powdered milk is made by eliminating the water from milk and evaporating it to dryness. Spray drying is the most common method of producing powdered milk, which is a manufactured dairy product. After raw milk has been pasteurized, it is sprayed dry. It's then cooked, evaporated, then heated again to get a concentrated milk solids combination. After that, the mixture is sprayed into a heated chamber, where it is reduced to fine particles. Milk's capacity to revert to its former state when rehydrated with water is due to this atomized process. Milk is frequently dried again after the spray drying process to ensure that any remaining moisture is eliminated before packaging. It is then shipped to a variety of destinations, including grocery stores, emergency food warehouses, and countries with limited access to fresh milk. Powdered milk is commonly used in the production of newborn formula, confectionary like chocolate and caramel candy, and baked goods recipes where liquid milk would make the result too thin. Powdered milk is also used in a variety of sweets, including the famous Indian milk balls known as gulab jamun and the iconic Indian sweet treat known as chum chum (sprinkled with desiccated coconut) (made with skim milk powder). Powdered milk is used in many no-cook nut butter recipes to keep the nut butter from turning liquid by absorbing the oil. • Milk powder contains nearly the same amount of proteins (26%) and carbs (37%) as liquid milk, however the water content is reduced to just 3%. However, depending on the commercially accessible brand, the fat percentage ranges from 25 to 28 percent. • Casein, a milk protein, is supposed to activate the entire body and aid muscle protein production. • Vitamins A and D are also added to milk powder. Vitamin A aids in the creation of bones, whereas Vitamin D aids in the improvement of vision. Both vitamins are essential for the preservation and repair of skin. • It contains calcium, which aids in the growth and preservation of teeth and bones throughout life. Breastfeeding is sometimes medically contraindicated. These are some of them: • Health of the mother: The mother is HIV-positive or suffers from active TB. She is very sick or has undergone some types of breast surgery that may have removed or severed all of the breast's milk-producing components. She is using any medicine that could harm the baby, including both prescription and illicit drugs like cytotoxic chemotherapy for cancer treatment. • Breastfeeding is not possible for the baby: Breastfeeding is difficult or impossible for the infant due to a birth abnormality or inborn metabolic error such as galactosemia. • Baby is at risk of malnutrition: Infants may be at risk of malnutrition in certain circumstances, such as iron deficiency, vitamin deficiencies (e.g., vitamin D, which may be less present in breast milk than needed at high latitudes with less sun exposure), or inadequate nutrition during the transition to solid foods. Improved diet and knowledge of moms and caregivers, as well as the availability of macro and micronutrients, can often decrease risks. • Food allergies: The mother consumes foods that may cause the infant to have an allergic reaction. • Financial constraints: Maternity leave is either underpaid, insufficient, or not available. Breastfeeding is hampered by the mother's job. Breastfeeding mothers may see a decrease in their earning ability. From 2018 to 2025, the global milk powder market is expected to increase at a CAGR of 4.4 percent, from $27,783.3 million in 2017 to $38,086.1 million in 2025. Milk powder is a dry dairy product made by evaporating milk to dehydrate it. Making milk powder has the goal of extending the shelf life of milk without the need of a refrigerator. Whole milk powder, skimmed milk powder, dairy whitener, and various varieties of milk powder are available. It is commonly consumed around the world due to its nutritional benefits, and it has been used in infant formulae, confectionaries, baked pastries, and savoury dishes. The global milk powder market is driven by factors such as an increase in the usage of milk powder in infant foods and the availability of many nutrients such as vitamin C, vitamin B12, thiamin, and high levels of protein. Furthermore, the milk powder business is growing due to lower storage and transportation costs. The inclusion of preservatives, adulteration, and tight infant food rules, on the other hand, limit the expansion of the milk powder business. The development of flavoured milk powder has opened up new commercial potential. Dehydrating milk by roller drying and spray drying produces milk powder. Milk powder is made from several types of milk, which defines the composition of the powder. Whole milk powder, skimmed milk powder, dairy whitener, buttermilk powder, fat-filled milk powder, and others make up the milk powder market, according to the research. Many consumers believe that whole milk is the most natural kind of milk, but it is less popular among individuals who are concerned about their weight or who are on a particular diet. Key Players: 1. D S P I Milk Foods Ltd. 2. Haryana Milk Foods Ltd. 3. Herman Milkfoods Ltd. 4. K K Milk Fresh India Ltd. 5. Kamdhenu Foods Ltd. 6. Kwality Ltd. 7. Markandeshwar Foods & Allied Products Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Business Plan for Production of Unsaturated Polyester Resin.

The third largest class of thermoset moulding resins is unsaturated polyesters. They're made when a diol condenses with a mixture of saturated and unsaturated anhydrides. When cross-linked with reactive vinyl monomers like styrene, the condensation products (reactive resins) form extremely durable structures and coatings. The types of anhydrides and glycols utilised, as well as their relative amounts, determine the qualities of the cross-linked resin. The bulk of commercial unsaturated polyester resins (UPR) are made up of 1,2-propylene glycol as the diol and phthalic and maleic anhydride as the saturated and unsaturated components. Epoxy resins such as epichlorhydrin or bisphenol A diglycidyl ether can also be used to condense anhydrides and acids. The epoxy compounds' oxirane rings behave as difunctional glycols, which means they can replace all or portion of the polyols. Glycidyl methacrylates are sometimes used to cap carboxylated unsaturated polyesters. To tailor the characteristics of unsaturated polyesters, a variety of glycols, acids, and anhydrides can be utilised. Long-chain aliphatic acids, such as adipic or succinic acid, improve flexibility but diminish chemical and heat resistance, therefore isophthalic acid (IPA) and terephthalic acid (TA) are sometimes used to provide higher thermal and chemical resistance. Ethylene glycols, such as diethylene glycol and polypropylene glycol, can improve flexibility in a similar way. To tie off excess hydroxyl and carboxyl groups and lower the molecular weight of the final prepolymer, monofunctional acids and bases can be used. The following are some of the benefits of polyester resin: 1. Resistant to water and a wide range of chemicals. 2. Weather and age resistance is adequate. 3. It is inexpensive. 4. Polyesters can endure temperatures of up to 80 degrees Celsius. 5. Polyesters have good wetting properties when it comes to glass fibres. 6. Relatively low shrinkage during curing, ranging from 4–8%. 7. The range of linear thermal expansion is 100–200 x 106 K1. In 2019, the global unsaturated polyester resin market was worth USD 11.63 billion. In these end-use areas, recent advancements in the building and construction and tank and pipe industries are projected to fuel demand for isophthalic. The market for unsaturated polyester resin is expected to benefit from increased use of environmentally friendly and energy-saving products (UPR). Bio-based unsaturated polyester resins, which offer recyclability, excellent strength, and thermal and corrosion resistance with lower thickness, are expected to drive market growth. Demand is expected to be bolstered by technological breakthroughs, innovations, and studies aimed at broadening the product's application scope. In 2019, Asia Pacific dominated the UPR market with a revenue share of over 57.0 percent. The growth of major end-use industries such as construction, electronics, transportation, and marine is driving the market. In the near future, the market for UPR is expected to grow due to the automotive industry's strong manufacturing base in China, Japan, and India, as well as increased passenger vehicle sales. In addition, over the forecast period, rising demand for composites in solder pallets, speaker housings, and reinforced cell phones is expected to boost the market for UPR. However, the availability of alternative polymer resins for composites manufacturing, such as epoxy resin and nylon, is expected to limit demand for UPR in electrical applications. Key Players: • Ashland India Pvt. Ltd. • Ineos Styrolution India Ltd. • Kanoria Chemicals & Inds. Ltd. • Lanxess India Pvt. Ltd. • Reichhold India Pvt. Ltd. • Satyen Polymers Pvt. Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Business Plan for Production of Unsaturated Polyester Resin.

The third largest class of thermoset moulding resins is unsaturated polyesters. They're made when a diol condenses with a mixture of saturated and unsaturated anhydrides. When cross-linked with reactive vinyl monomers like styrene, the condensation products (reactive resins) form extremely durable structures and coatings. The types of anhydrides and glycols utilised, as well as their relative amounts, determine the qualities of the cross-linked resin. The bulk of commercial unsaturated polyester resins (UPR) are made up of 1,2-propylene glycol as the diol and phthalic and maleic anhydride as the saturated and unsaturated components. Epoxy resins such as epichlorhydrin or bisphenol A diglycidyl ether can also be used to condense anhydrides and acids. The epoxy compounds' oxirane rings behave as difunctional glycols, which means they can replace all or portion of the polyols. Glycidyl methacrylates are sometimes used to cap carboxylated unsaturated polyesters. To tailor the characteristics of unsaturated polyesters, a variety of glycols, acids, and anhydrides can be utilised. Long-chain aliphatic acids, such as adipic or succinic acid, improve flexibility but diminish chemical and heat resistance, therefore isophthalic acid (IPA) and terephthalic acid (TA) are sometimes used to provide higher thermal and chemical resistance. Ethylene glycols, such as diethylene glycol and polypropylene glycol, can improve flexibility in a similar way. To tie off excess hydroxyl and carboxyl groups and lower the molecular weight of the final prepolymer, monofunctional acids and bases can be used. The following are some of the benefits of polyester resin: 1. Resistant to water and a wide range of chemicals. 2. Weather and age resistance is adequate. 3. It is inexpensive. 4. Polyesters can endure temperatures of up to 80 degrees Celsius. 5. Polyesters have good wetting properties when it comes to glass fibres. 6. Relatively low shrinkage during curing, ranging from 4–8%. 7. The range of linear thermal expansion is 100–200 x 106 K1. In 2019, the global unsaturated polyester resin market was worth USD 11.63 billion. In these end-use areas, recent advancements in the building and construction and tank and pipe industries are projected to fuel demand for isophthalic. The market for unsaturated polyester resin is expected to benefit from increased use of environmentally friendly and energy-saving products (UPR). Bio-based unsaturated polyester resins, which offer recyclability, excellent strength, and thermal and corrosion resistance with lower thickness, are expected to drive market growth. Demand is expected to be bolstered by technological breakthroughs, innovations, and studies aimed at broadening the product's application scope. In 2019, Asia Pacific dominated the UPR market with a revenue share of over 57.0 percent. The growth of major end-use industries such as construction, electronics, transportation, and marine is driving the market. In the near future, the market for UPR is expected to grow due to the automotive industry's strong manufacturing base in China, Japan, and India, as well as increased passenger vehicle sales. In addition, over the forecast period, rising demand for composites in solder pallets, speaker housings, and reinforced cell phones is expected to boost the market for UPR. However, the availability of alternative polymer resins for composites manufacturing, such as epoxy resin and nylon, is expected to limit demand for UPR in electrical applications. Key Players: • Ashland India Pvt. Ltd. • Ineos Styrolution India Ltd. • Kanoria Chemicals & Inds. Ltd. • Lanxess India Pvt. Ltd. • Reichhold India Pvt. Ltd. • Satyen Polymers Pvt. Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Production Business of Sanitary Napkins - How To Make It Happen. Most Demanding Profitable Business of Women Hygiene Products.

A sanitary napkin, sanitary towel, sanitary pad, menstrual pad, or pad is an absorbent item worn by women in their underwear when menstruating, bleeding after giving birth, recovering from gynecologic surgery, having a miscarriage or abortion, or in any other situation where a flow of blood from the vagina is required to be absorbed. A menstrual pad is a form of period hygiene product that is worn on the outside of the vaginal canal, as opposed to tampons and menstrual cups, which are worn within. Pads are often replaced by removing the pants and panties, removing the old pad, placing the new pad on the inside of the underwear, and drawing the panties back on. To avoid specific bacteria that might fester in blood, pads should be changed every 3–4 hours; however, this period may vary according on the type worn, the flow, and the time it is worn. Menstrual pads come in a variety of materials, which vary by style, place of origin, and brand. The pads are not in the same category as incontinence pads, which have a higher absorbency and are worn by those who suffer urine incontinence or stress incontinence. Different Types of Sanitary Napkins: Disposable Sanitary Napkins come in a variety of styles: 1. Panty liner: For everyday vaginal discharge, light menstrual flow, "spotting," slight urinary incontinence, or as a backup for tampon or menstrual cup use. 2. Ultra-thin: A very small (thin) pad that may be as absorbent as a Regular, Maxi/Super, or Super-thin pad but with less volume. 3. Regular: A pad with a medium level of absorbency. 4. Maxi/Super: A bigger absorbency pad that is especially useful at the beginning of the menstrual cycle, when menstruation is frequently the heaviest. 5. Overnight: A lengthier pad with an absorbency ideal for overnight usage to provide greater protection while the wearer is lying down. 6. Maternity: These are slightly longer than a maxi/Super pad and are designed to absorb lochia (bleeding after childbirth) as well as pee. Women use menstrual pads to absorb period flow and protect their clothing and belongings. They are usually individually wrapped to make carrying them in a handbag or bag easier and more unobtrusive. This wrapper can be used to wrap dirty pads before throwing them away in the proper containers. Some women prefer to use toilet paper to wrap the pads instead of (or in addition to) the wrapper, which is often composed of slick plastic with a little tape tab and may not adhere well. Menstrual pads of any kind should not be flushed since they can clog the toilet. Soiled pads are nearly always placed in a receptacle in public bathrooms in developed countries. If gauze is unavailable or insufficient, they make good first-aid dressings for excessive bleeding due to their high absorbency. Menstrual pads are used by many women who have urine incontinence to control bladder leaks. Menstrual pads, on the other hand, are meant to absorb menstrual flow and are not as successful at absorbing urinary leakage; incontinence pads are. If a woman is menstruation and does not have sanitary napkins on hand, she may use toilet paper as a temporary substitute. In the year 2020, the sanitary napkin industry will be worth almost USD 521.5 million. Between 2021 and 2026, the market is predicted to increase at an annual rate of 11%, reaching a value of around USD 975.4 million. Hygiene and health of women are key problems all around the world. A sanitary napkin is an absorbent material that a woman uses during her menstrual period. The materials used to make sanitary napkins are cellulose, polyethylene, and cotton. Manufacturers are expected to boost their CSR (corporate social responsibility) initiatives relating to women's hygiene and focus on unexplored rural markets. Wings napkins, aromatic napkins, quilted linings, panty liners, and pad thickness reduction are only a few of the key advances in the sanitary napkin business. Traditionally, sanitary napkins have been constructed of rayon and hydrophilic wood pulp. Fluids soak slowly through these materials. Manufacturers are currently adopting ultra-absorbent polymers and non-woven materials that absorb fluid faster than standard sanitary napkins. Furthermore, these materials reduce the sanitary napkin's thickness. During the forecast period, all of these factors are projected to boost the sanitary napkin market. Various factors such as changing sanitary napkin buying habits, an increase in the number of working women, more awareness about female hygiene, and rising health concerns are all contributing to the global market's rise. Governments are also encouraging enterprises to run hygiene campaigns and develop marketing strategies in order to modify women's opinions and build their self-confidence and self-esteem, propelling the global sanitary napkin industry.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Bamboo Toothbrush (Eco-Friendly) Manufacturing Business | Profitable Business of Bamboo Products Industry Ideas.

Bamboo, on the other hand, is an entirely natural product. Bamboo is a fast-growing plant that can be harvested in 3–5 years after being planted. It requires extremely little water and no pesticides. It also thrives in a wide range of conditions. As a result, it certainly has a lesser carbon footprint than plastic in terms of production. Bamboo is a natural material that is totally biodegradable, taking about 6 months to decompose in compost. This means that you can compost the handle of a bamboo toothbrush. Bamboo toothbrushes are an environmentally beneficial alternative to plastic toothbrushes. • Natural flex is provided by the ergonomic handle. • Surface stains are polished away with nylon bristles. • Cleans along the gum line while massaging the gums. • Gentle on the enamel and gums with soft bristles. • BPA-free and environmentally friendly. The most well-known and widely used benefit is that a bamboo-based toothbrush eliminates unnecessary waste while providing the same high level of cleaning as a plastic brush. Composting, recycling, and reusing your toothbrush has never been easier, with both the packing and disposing of your toothbrush. Bamboo toothbrushes are an environmentally responsible option because bamboo is a natural plant that is totally biodegradable, making it a renewable and long- lasting resource. It lowers pollution in the environment and plastic garbage in our oceans. - It is made of bamboo, which is an environmentally beneficial material. - Bamboo's antibacterial qualities allow it to be grown without the use of hazardous chemicals. - It has a biodegradable handle that decomposes quickly. Key Players: • Colgate-Palmolive Company. • The Humble Co. • Ecolife Innovations LLC. • Brush with Bamboo. • The Bamboo Brush Society. • Bamboo Brush Co. • Mother's Vault. • Yangzhou E.S. Toothbrush Co., Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Business of Feldspar Processing. Business Opportunities in Minerals Industry.

The majority of the things we use on a daily basis are produced of feldspar, the most abundant mineral group in the earth's crust. Feldspars are particularly useful in industrial processes because they contain both alkali and alumina. Feldspar alumino-silicates operate as a flux, lowering the verification temperature and providing alumina, which increases hardness, durability, and chemical corrosion resistance in ceramic wares, electrical porcelain, and all types of glass and fibre insulation. Feldspars are employed as functional fillers in the paint, plastic, rubber, and adhesive industries, as well as as fluxing agents in ceramics and glass manufacture. Feldspars form intrusive and extrusive igneous rocks from magma, and they're also found in a variety of metamorphic rocks. The rock is almost entirely made up of calcic plagioclase. Anorthosite is a kind of feldspar. Feldspars can be found in a wide variety of sedimentary rocks. In the glass and ceramics industries, feldspars are frequently employed. Plagioclase feldspars are less widely used in commercial applications than alkali feldspars. Albite, often known as soda spar, is a mineral used in ceramics. As both interior and external facing slabs, the feldspar-rich rocks larvikite and a few anorthosites are used. A number of feldspars are also utilised as jewels. Moonstone, for example, refers to variations with opalescence. Labradorite with powerful colour flashes is known as spectrolite. Sunstone (oligoclase or orthoclase) is often yellow to orange to brown in colour, with a golden sheen caused by reflections from red hematite inclusions. Amazonite, a green microcline variant, is used as a decorative material. Sanidine is found in extrusive felsic igneous rocks including rhyolite and trachyte as phenocrysts (huge visible crystals). It suggests that the rocks cooled swiftly following their eruption. Sanidine is also used as a marker for sanidinite hornfels or facies in high-temperature contact metamorphism. The global feldspar market was valued at USD 682.7 million in 2020, with a CAGR of 6.1 percent predicted during the forecast period. Rapidly rising demand for ceramic tiles in countries throughout the world, increasing use of feldspar in the glass sector, and increasing government investments in construction activities and infrastructure projects in established and developing nations are all driving market growth. Other significant drivers driving Market growth include the rapid increase in investments for the development, improvement, and renovation of residential and commercial infrastructure and buildings. Feldspars are a collection of rock-forming tecto silicate minerals that account for approximately 41% of the continental crust's weight. Feldspar works as a fluxing agent, lowering the melting temperature of quartz and regulating glass viscosity. Plagioclase Feldspar and K-Feldspar are two different types of feldspar. Different varieties of feldspar can be distinguished based on the presence of distinct inorganic minerals. The two key minerals that distinguish the varieties of feldspar are sodium and potassium. Plagioclase feldspar is a white mineral that is used as a filler in paints, coatings, plastics, and other products. The presence of numerous chemical compounds and minerals in feldspar, such as sodium oxide, potassium oxide, and alumina, help to promote its importance and use in the glass and ceramics industries. Other significant drivers driving the feldspar market's growth include increased demand for glass and ceramic materials, welding rod coatings, and extenders and fillers in the paint sector. Market Furthermore, rising development and construction activity in the residential sector, as well as rising demand for electronics items, are projected to boost market expansion to a large extent in the future. The global feldspar market was estimated at USD 1.61 billion in 2019, with a compound annual growth rate (CAGR) of 4.9 percent predicted from 2020 to 2027. The characteristics of the glass and ceramics sectors have a significant impact on market growth. The product's unique chemical ingredients, such as potassium oxide, sodium oxide, and alumina, play an important role in encouraging its use in the glass and ceramics industries. The product is primarily utilised in glassmaking and ceramics filler applications in its ground form ranging from 20 mesh to 200 mesh. Over the recent decade, China's demand for feldspar has increased significantly. The product's alumina component provides exceptional corrosion resistance, while alkalis give heat resistance. The substance is widely utilised in glassmaking due to its great characteristics. In 2019, Asia Pacific dominated the market, accounting for roughly 48.0 percent of worldwide revenue. The presence of a robust glassmaking and ceramics industry in the region is projected to influence feldspar market growth in Asia Pacific. Because of China's and India's thriving economies, the region has experienced consistent economic growth. Both countries are among the largest construction and automotive markets in the world. This will provide a steady platform for the glassmaking industry to mature, which would likely drive the growth of the feldspar market space in Asia Pacific.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production Business of Blood Collection Tubes (Vacutainer)

A vacuum blood collection tube is a sterile glass or plastic test tube with a stopper that creates a vacuum inside the tube, allowing for the visualization of a predefined volume of liquid. The vacuum blood collection tube prevents needle stick injuries by preventing needles from coming into touch with humans and so being infected. In the vacuum blood collecting tube, a double-pointed needle is attached to a plastic tubular adaptor. Double-pointed needles are available in a wide range of gauge sizes. The needle's length ranges from one to one and a half inches. Vacuum blood collection tubes, which are used to preserve blood for treatment in a medical laboratory, may contain other materials. A vacuum blood collection tube is routinely used in clinics and laboratories to retain blood for future testing. A replacement for vacuum blood collection tubes that can preserve blood for testing purposes for an extended period of time has been created. Tubes for collecting blood under vacuum exist in a variety of diameters and specimen types. The vacuum created when a needle punctures the cap of a blood collection tube dissipates over time, and blood does not flow into the tube. With a CAGR of 7.1 percent from 2020 to 2025, the Blood Collection Tubes Market is expected to reach $2.81 billion by 2025. Many ailments necessitate the use of blood to diagnose and treat them. The blood processing process includes the collection, storage, and management of blood after it has been acquired from a donor. The blood collection tubes, also known as vacationers, are sterilised and include a safety-engineered stopper with several labelling options, including the volume and the colour of the caps, which indicate the additives in the tube. The rising usage of blood samples in diagnostics and the need for blood components in medical procedures are driving the need for blood collection tubes. Few Indian Major Players 1. Becton Dickinson India Pvt. Ltd. 2. Hindustan Syringes & Medical Devices Ltd. 3. Kriya Medical Technologies Pvt. Ltd. 4. Narang Medical Ltd. 5. Poly Medicure Ltd.
Plant capacity: Blood Collection Tubes (Vacutainer) 13x100 with EDTA: 100,000 Nos per day Blood Collection Tubes (Vacutainer) 13x75 Plain: 100,000 Nos per dayPlant & machinery: 345 Lakhs
Working capital: -T.C.I: Cost of Project: 983 Lakhs
Return: 30.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Lucrative Industry of Electric Motors

A machine that converts electricity into mechanical energy is known as an electric motor. Some motor manufacturers, particularly those producing sizes of 5 hp and higher, finish-machine the bearing journals and rotor diameter as a rotor assembly. The bearing journals and rotor diameter are properly matched with this technique. In most electric motors, the interaction between the magnetic field of the motor and the electric current in a wire winding generates force in the form of torque applied to the motor's shaft. Some of the applications for electric motors are listed below. • Electrical motor applications include blowers, fans, machine tools, pumps, turbines, power tools, alternators, compressors, rolling mills, ships, movers, and paper mills. • HVAC (heating, ventilation, and air conditioning), home appliances, and motor vehicles all employ electric motors. The Indian market for electric motors is highly fragmented due to the presence of a large number of participants, including large corporations and small and medium-sized firms. The India Electric Motors Market is estimated to grow at a CAGR of 5.9% over the next five years, from 2020 to 2026. Electric vehicles' growing popularity is boosting the global and Indian electric motor markets to new heights. Demand for automotive electric motors is expected to rise in the coming years as gasoline prices rise and strict rules aimed at reducing air pollution levels across the country are enacted. In addition, the FAME II programme for 100 percent vehicle electrification, the Make in India programme, and other initiatives targeted at assisting India in achieving its goal of becoming a global manufacturing hub will continue to fuel demand for electric motors in the country. Few Indian Major Players 1. A B G Motors Ltd. 2. Brook Crompton Greaves Ltd. 3. Hyoseong Electric India Pvt. Ltd. 4. Jem Industries Ltd. 5. Lakshmi Electrical Drives Ltd. 6. Manmir Engineering Inds. Ltd. 7. Marathon Electric India Pvt. Ltd.
Plant capacity: 5 KW Three Phase Induction Motors 120 Nos Per Day 10 KW Three Phase Induction Motors 120 Nos Per Day 10 KW Brushed DC Motors 120 Nos Per Day Automated Water Pump 5 KW Three Phase Induction Motors 120 Nos Per DayPlant & machinery: 467 Lakhs
Working capital: -T.C.I: Cost of Project: 3949 Lakhs
Return: 26.00%Break even: 41.00%
Add to Inquiry Add to Inquiry Basket

Set up an Trading Business (Potato Powder, Onion Powder, Capsicum Powder, Ginger Powder and Curcumin Powder)

A core economic concept is the buying and selling of commodities and services, with remuneration paid by a buyer to a seller, or the exchange of goods or services between parties. Trade can take place between producers and consumers within an economy. Governments can use international trade to create new markets for goods and services that would otherwise be unavailable. As a result of overseas trade, the market is more competitive, resulting in reduced pricing for customers at home. Trade marketing is a broader marketing discipline that focuses on generating demand with supply chain partners such as wholesalers, retailers, and distributors, rather than directly with customers. Potatoes are the fourth most extensively produced crop after wheat, rice, and corn. They have the most starch extracted per hectare of grown grain, 6.5 tonnes! Potatoes come in a range of shapes and sizes, but ones with a lot of starch are the finest for this. Because these potatoes are heavy in fibre and take a long time to digest, they're great for avoiding colon cancer. Potato powder is a gluten-free starch powder made from potatoes. All around the world, onions are widely farmed and consumed. Onion powder is made from crushed dehydrated onions that are grown naturally, without the use of chemical pesticides, herbicides, or artificial fertilisers. It has a strong onion flavour and may be used in a wide range of dishes, making it a culinary necessity. Because of its high nutrient content, onion powder has a variety of health advantages, including 10 percent or more of your daily vitamin C, vitamin B6, and manganese requirements. The Capsicum genus of pepper plants includes sweet peppers like bell peppers. Nightshade peppers, like eggplant, potatoes, and tomatoes, are nightshade vegetables. Although this vegetable is native to the Americas, it is produced and used all over the world in international cuisines and as a natural medicine. Capsicums are sweet and tangy, although green varieties are bitterer. Ginger is one of the healthiest spices available, as it is high in nutrients and bioactive compounds that benefit our bodies and minds. Shunthichurna, or dry ginger powder, is a spicy powder prepared from dried ginger roots with a strong flavour. It increases Pitta dosha while balancing Vata and Kaphados doshas. Due to its medicinal properties, Shunthichurna is used in a range of Ayurvedic formulations. Turmeric's greatest physiologically active phytochemical component is curcumin. It has been extracted, concentrated, standardized, and thoroughly researched. Curcumin, the yellow pigment in turmeric, was found around two centuries ago, and its structure as diferuloylmethane was established in 1910. According to significant research undertaken over the last half-century, Curcumin is responsible for the renowned variety of medical advantages traditionally associated with Turmeric. Few Indian Major Players 1. Abans Enterprises Ltd. 2. Chothani Foods Ltd. 3. Mansi International Pvt. Ltd 4. N H C Foods Ltd. 5. Olam Agro India Pvt. Ltd.
Plant capacity: Potato Powder 40 Kgs Per Day Capsicum Powder 40 Kgs Per Day Curcumin Powder 40 Kgs Per Day Ginger Powder 40 Kgs Per Day Onion Powder 40 Kgs Per Day Plant & machinery: 1Lakhs
Working capital: -T.C.I: Cost of Project: 27 Lakhs
Return: 30.00%Break even: 77.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 213 of 263 | Total 2626 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 213 262 263   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top