Google Search

Search

Already a Member ?

Best Business Opportunities in Manipur - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Manipur is a state in north Eastern India, with the city of Imphal as its capital. Manipur has been at the crossroads of Asian economic and cultural exchange for more than 2500 years. It has long connected Indian subcontinent to Southeast Asia, enabling migration of people, cultures and religions. Manipur is primarily an agrarian economy, with significant hydroelectric power generation potential.

The natural vegetation occupies an area of about 14,365 km² which is nearly 64% of the total geographical area of the state. The vegetation consists of a large variety of plants ranging from short and tall grasses, reeds and bamboos to trees of various species. Broadly, there are four types of forests - Tropical Semi-evergreen, Dry Temperate Forest, Sub-Tropical Pine and Tropical Moist Deciduous.


DEMOGRAPHIC PROFILE

Manipur has population of 25.7 Lakhs, an increase from figure of 22.94 Lakh. Total population of Manipur as per 2011 census is 2,570,390 of which male and female are 1,290,171 and 1,280,219 respectively.

Total area of Manipur is 22,327 sq. km. Density of Manipur is 115 per sq km which is lower than national average 382 per sq km. In 2001, density of Manipur was 103 per sq km.

Of the total population of Manipur state, around 67.55 percent live in the villages of rural areas. In actual numbers, males and females were 878,469 and 857,767 respectively. Total population of rural areas of Manipur state was 1,736,236. In rural areas of Manipur, literacy rate for males and female stood at 83.39 % and 67.03 %. Average literacy rate in Manipur for rural areas was 76.20 percent. Total literates in rural areas were 1,142,564.

TOURISM

Least touched and least discovered Manipur promises to be the great tourist discovery of the21st century. An oval shaped valley surrounded by blue green hills, rich in art and tradition has inspired description such as the Switzerland of the East with its cascading rapids, tripling rivers, varieties of flowers, exotic blooms and lakes. The people of Manipur include Meitei, Nagas, Kuki-Chin-Mizo and Gorkhas groups and Muslims and other colorful communities which have lived in complete harmony for centuries.

The Ministry of Tourism has five Regional offices located at Kolkata (East), Mumbai (West), Delhi (North), Chennai (South) and Guwahati (North East), which are headed by an officer of the level of Deputy Director General designated as Regional Director.

Domestic tourists intending to visit Manipur by road via Dimapur/Kohima require Inner Line Permits to pass through Nagaland. These are issued by the Liaison officers of the Government of Nagaland at New Delhi, Calcutta, Guwahati, Shillong and the Sub-divisional officer (Civil), Dimapur, deputy Commissioner, Imphal can also issue permits to tourists traveling by road from imphal to Kohima and Dimapur in Nagaland.

INDUSTRY SECTOR

The Information Technology and IT Enabled Services sector in India is looking towards Tier-II and Tier-III cities to meet the growing demands of the industry for sourcing its required skilled manpower. The youth of Manipur have not only excelled in the field of Sports, but have already established a noticeable presence in the ITES industry in India.

Manipur State is striving to score higher on being business-friendly in terms of the available IT infrastructure. These include:

•        Software Technology Parks of India (STPI) unit of Imphal with Earth station and OFC connectivity.

•        Up gradation of IT infrastructure at Imphal to provide modern Business-ready built-up office space for IT/ITES firms.

•        Internet on the move – Various Telcos like BSNL, Tata Indicom, Airtel etc. are providing Wireless Internet across the State.

A high rate of unemployment exists in Manipur, particularly among the educated youth. According to the Live Register of Employment Exchange, the total number of educated job-seekers were recorded as 5, 83.65 thousands.

Manipur is rich in natural resources but due to difficult terrain, inadequate infrastructural facilities and varying climatic conditions, the state could not develop much in the industrial sector of its economy. In the initial stage, Govt. policy in the state was one of revival and revitalization of the traditional handlooms and handicrafts of the local habitats. The contribution of the manufacturing sector to the total gross state domestic product at current prices is found to be 6.17 percent. The trend of industrial development and the present local conditions of the state and in consonance with industrial policy of the Government of India, the Govt. of Manipur in its policy announcement of 1990, has decided to focus attention to the small scale and agro-based industries without discouraging the medium and large-scale industries. It is expected to serve the objective of employment generation and dispersal of industries in rural and urban areas. The state has laid emphasis on creating a strong industrial base and employment opportunities in the state through provision of various growth inducing factors based on locally available resources. It is based on locally available raw materials and minerals. In order to promote rapid industrialization, the State Government has over the years been offering attractive package of incentives and concessions to invigorative industries.

The khadi and Village Industries Commission (KVIC) was established by the Govt. of India in the year 1957. The Khadi and Village Industries is not only providing employment to people in rural and semi-urban areas at low investment per job, but also utilizes local skill resources and provides part-time as well as full time work to rural artisans, women and minorities.

The traditional sector of industries falls within the purview of organizations such as Khadi and Village Industries Commission. The KVIC include artisans in tiny industrial units and defines it as any industry located in a village or town inhabited by population not exceeding 10000 which produces goods and renders services with or without the use of power in which the fixed capital per head does not exceed Rs.15000.

Growth Centres are large villages or small towns which have the potential to become the nuclei for the socio-economic development of the surrounding area. The Growth Centres can be identified by the different orders with respect to the quality and quantity of services and facilities, service area and population. A growth centre of lowest order should have services such as agricultural input centre, primary and middle school, maternity and child care centres and daily market.

Small-Scale Industries (SSI) is an important segment of the economy, contributing substantially in the form of production, employment and exports. It has continued to play a vital role in the fulfillment of socio-economic objectives. The principal factor for defining small-scale Industries has always been based on the size of investment. Small-Scale Industries are those industries whose investment in fixed assets such as plants and machineries does not exceed Rs.100.00 lakhs (Rs.1 Crore). Investment in plant and machinery in respect of industry related Small-Scale Service and Business Enterprises (SSSBE) were increased to Rs.10.00 lakhs from Rs.5.00 lakhs. For speedy growth of small-scale industries, the Government has already brought about simplifications in the SSI registration procedures.

The State Government has introduced this Policy with various components being offered such as, incentives, improved infrastructure facilities, supply of quality power, and credit flow from Bank and Financial institutions, better market linkages and to boost investor confidence.

The Government of Manipur desire Manipur to be a preferred destination for industrial and trade activities and achieving to the aspiration of the people of Manipur, thereby affording to –

•        All round economic development and to improve living standards.

•        To create employment opportunities, skill development and self

•        Employment opportunities.

•        Optimal utilization of both natural and physical resources.

OBJECTIVE OF INDUSTRIAL POLICY

•        Develop adequate infrastructures to ensure planned and accelerated industrial development.

•        Promote maximum capital investment in the State for economic activities resulting in employment opportunities, improving standard of living of people at large and all-round development of the State.

•        Promote modernization and technology up-gradation of existing industrial units.

•        Encourage quality control, standardization and competitiveness of local products.

•        Promote eco-friendly industries.


INDUSTRIAL ACTIVITIES IDENTIFIED AS THRUST AREAS

•             Agro based industry 

•             Bio-Technology industries.

•             Floriculture. 

•             Handloom and Handicraft.

•             Medicinal Plants.

•             Distillation of oils from aromatic plants.

•             Mineral based industries.

•             Information Technology Trade and Commerce under Export Import mechanisms.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 17 of 253 | Total 2523 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 252 253   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Readymade Garments (Jean Trousers & Shirts)

Readymade garments are a part of our daily life. Clothes are an epitome of a culture. People in different parts of the world have their own styles of dressing which symbolize their culture and status. The Readymade garments industry is increasing day by day due to changes of fashion in day to day life. The textile industry including readymade garments occupies an unique position in the Indian economy. Its predominant presence in the Indian economy is manifested in terms of its significant contribution to the industrial production, employment generation and foreign exchange earnings. The changes in the life style since the onset of the liberalization era, and given the base of the industry for the overseas market, Indian garments industry have taken big strides. The entry of the Indian and global fashion designers has stimulated the market further. With the rising tailoring costs and relatively low prices of standardized products, the Indian consumer is increasingly taking to readymade. In the past, the readymade market was confined mainly to baby dresses and small manila-shirts and dress shirts. Now it has extended to trousers, suits, and lady dresses and, of course, fashion garments for men and women. Readymade garments are basically used for wearing purposes. It is used by all class of people. No need to mention that T-Shirts are used in all seasons. T-Shirts are used generally by both males and females. Few Indian Major Players are as under • Agrocel Industries Ltd. • Aspen Developers Pvt. Ltd. • Bharat Knitting Works Ltd. • Bodycare International Ltd. • Celebrations Apparel Ltd. • Centre of Excellence In Design Ltd. • Oswal Knit India Ltd. • P J L Clothing (India) Ltd. • Punjab Woolcombers Ltd. • Suvidhi Weavers Ltd.
Plant capacity: •Shirts :500 Pcs/Day•Jeans Trouser:500 Pcs/DayPlant & machinery: Rs 50 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 247 Lakhs
Return: 25.66%Break even: 57.61%
Add to Inquiry Add to Inquiry Basket

Disposable Plastic Syringes - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Disposable Syringes made of plastic material have been successfully used in medical and pharmaceutical practice for many years. The constantly increasing use of this type Syringe indicates its importance which is based mainly on the advantages it offers regarding cost and hygienic applications. The manufacture of plastic syringes has been developed to such a degree that the products now satisfy the requirements and standards set by Hospital and physicians. At the same time they offer the best possible technique of application to the physician and the highest possible degree of safety to the patient. Disposable Syringes are being used by doctors to inject medicines through intravenous or intramuscular ways for the treatment of diseases & also by research & development personnel. Disposable syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized condition, ready to use, and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. Moreover, the horror of AIDS worldwide has almost dispensed with the reuse of syringes and the demand of disposable syringes has increased phenomenally. Disposable syringes are mostly injection moulded from polypropylene. Syringes are available in sizes of 1 ml, 2 ml, 5 ml and 10 ml, 50ml in a variety of designs and consist of either two or three components construction. Few Indian Major Players are as under • Albert David Ltd. • H L L Lifecare Ltd. • Hindustan Syringes & Medical Devices Ltd. • Iscon Surgicals Ltd. • Lifelong Meditech Ltd. • Raaj Medisafe India Ltd. • Sangam Health Care Products Ltd. • South India Surgical Co. Ltd. • Transmedica (India) Ltd.
Plant capacity: •Disposable Plastic Syringes (2 ml Size):40000 Pcs/Day•Disposable Plastic Syringes (5 ml Size):40000 Pcs/DayPlant & machinery: Rs 490 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 757 Lakhs
Return: 15.24%Break even: 61.07%
Add to Inquiry Add to Inquiry Basket

Masala Powder - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, bulb) of plants used as a flavoring or seasoning, although many can also be used as a herbal medicine. A closely related term, ‘herb’, is used to distinguish plant parts finding the same uses but derived from leafy or soft flowering parts. The two terms may be used for the same plants in which the fresh leaves are used as herbs, while other dried parts are used as spices, e.g. coriander, dill. Spices are no longer regarded as wonders of medicine, but they still play an important part in the manufacture of many cosmetics and perfumes and are grown commercially for their coloring and preservative properties. Nutmeg and mace are no longer the main crops of the Moluccas, but instead are grown on a large scale on the West Indian island of Grenada. Cloves, however, still come from Madagascar and Zanzibar-names that are still evocative and romantic and hint strongly of spices. Spices can be aromatic or pungent in flavors and peppery or slightly bitter in taste. In order to keep their fragrance and flavor intact, they are generally added in the cooking recipes at the last moments since, prolonged cooking results in evaporation of essential oils. Spices are being used in the preparation of season soups, barbecue sauces, pickling and as a main ingredient in a variety of curry powders.Spices along with some seasonal herbs are being used to enhance the flavor and taste of vegetable, chicken, fish and meat dishes. Few Indian Major Players are as under • A V T Mccormick Ingredients Pvt. Ltd. • A V Thomas Intl. Ltd. • Chordia Food Products Ltd. • Devon Foods Ltd. • Eastern Overseas Ltd. • Empire Spices & Foods Ltd. • Indian Chillies Trdg. Co. Ltd. • Indian Products Ltd. • J C R Drillsol Pvt. Ltd. • Jamnadas Madhavji Intl. Ltd. • Kedar Spices Ltd. • Kohinoor Foods Ltd. • M T R Foods Pvt. Ltd. • Madhur Industries Ltd. • N H C Foods Ltd. • Nedspice Processing India Pvt. Ltd. • Ramdev Food Products Pvt. Ltd. • S T C L Ltd. • Shalimar Chemical Works Pvt. Ltd. • Swani Spice Mills Pvt. Ltd. • Vinayak Ingredients (India) Pvt. Ltd.
Plant capacity: Red Chilli Powder:400 Kgs/Day •Sambhar Masala :400 Kgs/Day •Biryani Masala:400 Kgs/Day •Chicken Fry Masala:400 Kgs/DayPlant & machinery: Rs 54 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 239 Lakhs
Return: 28.29%Break even: 56.07%
Add to Inquiry Add to Inquiry Basket

BLOOD BAGS - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Blood bag is a disposable bio-medical device used for collection, storage, transportation and transfusion of human blood and blood components. The system consists of a single or multiple bag connected with tubings, needle, needle cover, clamp etc. The Blood Bags are made of plastic-material, which are compatible with blood. The introduction of flexible PVC bags for the storage of blood and its components totally replaced the use of glass bottles because of its numerous advantages. Blood bags enable better separation of blood components in a more sterile manner and safer transfusion of components. This has led to increasingly wider use of blood component therapy than whole blood use, thus enabling more effective use of the scarce donor blood that is available. Blood Bags can successfully replace the use of glass bottles for collection storage, transportation and transfusion of blood and blood components since bottles require exhaustive cleaning, rinsing and autoclaving procedures and there are chances of breakage at any stage. Further, use of disposable bags eliminates the possibility of any contamination. Blood bags contain an anticoagulant solution and a red blood cell preservative solution, and are used in blood banks which both collect donor blood and separate blood components. Blood bags are made from imported, medical grade PVC granules & sheets in Class 10000 Clean room environments. Increase in the healthcare facilities will further act as a driver for the growth of medical devices sector in India. The blood bag market is expected to grow further in the coming years owing to continuous developments and rising demand for better blood collection technology. As a whole it is a good project for new entrepreneurs to invest.
Plant capacity: 30000 Nos./DayPlant & machinery: Rs 426 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 1465 Lakhs
Return: 27.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Camphor (Powder & Tablets) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Camphor (Cinnamomum camphora) is a white, crystalline substance with a strong odor and pungent taste, derived from the wood of camphor laurel (Cinnamomum camphora) and other related trees of laurel family. Camphor tree is native to China, India, Mongolia, Japan and Taiwan and a variety of this fragrant evergreen tree is grown in Southern United States? especially in Florida. Camphor is obtained through steam distillation, purification and sublimation of wood, twigs and bark of the tree. ? Camphor (C10H16O), is a naturally occurring bicyclic ketone, which is principally present in the volatile oils of camphor ex Cinnamomum camphora (Linn.) Nees at Ebermaier, fare. Lauraceae and of ocimum from Ocimum kilimandscharicwn Guerke, fare. Labiatae. Camphor used to be made by distilling the bark and wood of the camphor tree. Today, camphor is chemically manufactured from turpentine oil. It is used in products such as Vicks VapoRub. Camphor products can be rubbed on the skin (topical application) or inhaled. Modern uses include camphor as a plasticizer for nitrocellulose, as a moth repellent, as an antimicrobial substance, in embalming, and in fireworks. Solid camphor releases fumes that form a rust-preventative coating, and is therefore stored in tool chests to protect tools against rust. Camphor market is highly fragmented and dominated by regional players mainly owing to low capital investment in the market. The industry is characterized by high degree of competition and major players compete on price differentiation. Therefore, camphor is a price sensitive market with less scope for product differentiation. Few Indian Major Players are as under • Camphor & Allied Products Ltd. • Kanchi Karpooram Ltd. • Mangalam Organics Ltd. • Saptagir Camphor Ltd. • Vinayak Ingredients (India) Pvt. Ltd.
Plant capacity: Camphor Powder: 2.5 MT/Day •Camphor Tablets:2.5 MT/Day Plant & machinery: Rs 206 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 547 Lakhs
Return: 26.95%Break even: 50.15%
Add to Inquiry Add to Inquiry Basket

Bread Plant (Semi–Automatic) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Bread is a staple foodstuff, which is made and eaten in most countries around the world. Bread products have evolved to take many forms, each based on quite different and distinctive characteristics. Over the centuries craft bakers have developed our traditional bread varieties using their accumulated knowledge as to how to make best use of their available raw materials to achieve the desired bread quality. In some countries the nature of bread making has retained its traditional form while in others it has changed dramatically. The proliferation of bread varieties derives from the unique properties of wheat proteins to form gluten and from the bakers' ingenuity in manipulating the gluten structures formed within the dough. The rubbery mass of gluten with its ability to deform, stretch, recover shape and trap gases is very important in the production of bread and all fermented products. Of all the cereals, wheat is almost unique in this respect. Bread is most consumable wheat-based bakery product. It contains high nutritive value. They are easy to digest and compact in size, therefore, its consumption is increasing day by day. Indian bakery industry is spreaded over all small scale; large scale and house hold sectors. Bakery products in India are now in common use and are no more exclusive to a few households or classes of performs. Even then, unlike advanced countries where breads are considered basic essentials of a household budget, in India the element of capacity to pay "continues to play a significant role. The outlay on bread, thus shares the character of "discreationary" expenditure rather than expenditure on basic is applicable. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bonn Nutrients Pvt. Ltd. • Britannia Industries Ltd. • Candico (I) Ltd. • Daily Bread Gourmet Foods (India) Pvt. Ltd. • Elite (India) Ltd. • Heritage Foods Ltd. • Just Desserts Ltd. • Mansingh Hotels & Resorts Ltd. • Modern Food Inds. (India) Ltd. • Nimbus Foods Inds. Ltd. • Saturday Club Ltd.
Plant capacity: Bread (400 gms):10000 Pkts/DayPlant & machinery: Rs 52 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 101 Lakhs
Return: 27.00%Break even: 69.00%
Add to Inquiry Add to Inquiry Basket

PVC Membrane for Waterproofing - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The sheet of polyvinyl chloride is used as waterproof barrier in construction for all types of roofs, terraces, walls also in civil engineering in vertical, tunnels or small hydraulic works and water tanks lining (metallic or concrete), ornamental lakes, ponds, pools, golf courses etc. PVC sheets are manufactured with or without UV protection according to the intended application, if the application requires that the film is exposed to the sun apply UV resistant) if instead the sheet will be covered with another material so that is not exposed to sunlight PVC membrane is a cost-effective alternative to traditional roofing systems and can be produced in a multitude of colors to coordinate with individual building project needs. When produced in bright white, this flexible fabric membrane reduces radiant heat gain, keeping interior temperatures cooler during warmer weather conditions. PVC membrane is commonly coated with a protective acrylic or PVDF top coat with a design life of approximately 15-20 years. India's construction industry is growing ever-stronger, and is becoming an excellent area for build and interiors investment. This guide details the facts about the nation that will be useful for anyone looking to get involved with this vibrant, growing market. Few Indian Major Players are as under • C I C O Technologies Ltd. • Caprihans India Ltd. • I W L India Ltd. • Premier Polyfilm Ltd. • Radhika Polyesters Ltd. • Roofit Industries Ltd. • S T P Ltd.
Plant capacity: PVC Membrane (2 mm Thickness):3,333 SQM/DayPlant & machinery: Rs 238 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 469 Lakhs
Return: 25.76%Break even: 57.50%
Add to Inquiry Add to Inquiry Basket

High Tensile Fasteners - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

Industrial fasteners have a vital contribution for the growth of almost all sectors of industry. It is a wonderful manifestation which joins & secures materials together for any productive uses. A fastener is a connective mechanism that mechanically joins or affixes two or more objects together. A bolt is an externally threaded fastener designed for insertion through holes in assembled parts, and is normally intended to be tightened or released by torquing a nut. A nut is a type of hardware fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together. The two partners are kept together by a combination of the friction of their threads, a slight stretch of the bolt, and compression of the parts. High tensile nuts and bolts find wide application in joining part where continuous rotation and wear and tear of the nuts and bolts occurs. As the nuts and bolts are subjected to variable stress in a dynamic condition, there is every likelihood that these fasteners can be failed at any instant causing situations like catastrophe. For the above purpose, nuts and bolts are manufactured from alloy steels having high tensile strength and resistant to continuous wear and tear. In construction, connectors between structural members bolted connections are used when it is necessary to fasten two elements tightly together, especially to resist shear and bending, as in column and beam connections. Threaded metal bolts are always used in conjunction with nuts. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Aurangabad Electricals Ltd. • Caparo Engineering India Ltd. • Coventry Spring & Engg. Co. Ltd. • Dev Fasteners Ltd. • Forbes & Co. Ltd. • G S Auto International Ltd. • Holtzman Systems Ltd. • I S P L Industries Ltd. • Jaico Steel Fasteners Ltd. • Lakshmi Precision Screws Ltd. • M C S Fasteners (India) Ltd. • Mangal Steel Enterprises Ltd. • Mohindra Fasteners Ltd. • Patheja Forgings & Auto-Parts Mfrs. Ltd. • Patton Electro Ltd. • Pooja Forge Ltd. • Sterling Tools Ltd. • Sundram Fasteners Ltd. • Viraj Profiles Ltd.
Plant capacity: Mild Steel/HT Bolts :25 MT/Day •Mild Steel/HT Nuts :5MT/DayPlant & machinery: Rs 93 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 430 Lakh
Return: 28.41%Break even: 68.00%
Add to Inquiry Add to Inquiry Basket

Aerosol Cans - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

The aluminium aerosol can has been one of the most popular packaging materials for cosmetics, pharmaceutical and household items for decades. In addition to its ability for recycling in 100%, this modern packaging material meets all relevant European Standards. The indisputable advantage of the aluminium aerosol can is that it is light and strong at the same time; it excludes the possibility of corrosion and its packaging provides hermetical protection for the completed products. Besides its unique technical properties, the aluminium aerosol can ensures varied range of lithographical printings as well as special shaping options for achieving best ornamental performance of the completed product. Aerosols offer a wide range of products from mass-market goods such as cosmetic and household products, to specific aerosol types dedicated for industrial or medical purposes. Food Products: A wide range of food packed in aerosols can be found on the market such as: whipped cream, cooking oil, salad dressing, ketchup, mustard, icing, colorants, cheese spreads, chocolate and coffee powders. Safety Aerosols: Horn aerosols are designed to create a very loud noise for different purposes such as fire safety, boat safety, fog warning, evacuations, temporary alarms and other emergencies. Therefore it is a good project to invest. Few Indian Major Players are as under • Glenmark Pharmaceuticals Ltd. • Hindustan Tin Works Ltd. • Kaira Can Co. Ltd. •Punsumi Foils & Components Ltd.
Plant capacity: Aerosol Cans (200 ml Size):72000 Nos./DayPlant & machinery: Rs 182 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 772 Lakhs
Return: 25.00%Break even: 55.46%
Add to Inquiry Add to Inquiry Basket

Cattle Feed - Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Cost of Project

The principal feed resources for animal consumption in the country are crop residues like straws of wheat, rice and other cereals and stovers, which are very poor in feed value. Even these are in short supply. These are supplemented to some extent by relatively better quality fodders like cultivated leguminous and non-leguminous fodder grasses and concentrates. The latter are formulated largely from agro-industrial by-product and forest wastes and small quantities of low-grade cereals with the present stock of feed and fodder resources available in the country, it is impossible to meet the nutrient requirements of even the present day low-producing cattle and buffaloes. Such a situation is bound to aggravate difficulties in the feeding of better producing livestock such as cross bred lows in exploiting their full genetic potentiality for early growth, better reproduction and higher milk production. Foods are the basic need of every one, similarly feed for cattle’s is also very important and necessary as well. Without this, no one can live as well as good nutritive meal increase the productivity as well as the growth of an animal. Thus, the requirement of good cattle feed is always exists and it will further increase with the increase in population of cattle’s. Therefore, it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Agro Tech India Ltd. • Amrit Feeds Ltd. • Anirudh Foods Ltd. • Annam Feeds Ltd. • Baramati Agro Ltd. • Gajanan Extraction Ltd. • Goldmohur Foods & Feeds Ltd. • Graintec India Ltd. • Hanuman Minor Oils Ltd. • Hatsun Agro Products Ltd. • Indian Potash Ltd. • Khandesh Extraction Ltd. • Kumar Food Inds. Ltd. • Kwality Feeds Ltd. • Kwality Ltd. • Lakshmi Energy & Foods Ltd. • Maheshwari Solvent Extraction Ltd. • Piccadily Agro Inds. Ltd. • Puri Oil Mills Ltd. • S K M Animal Feeds & Foods (India) Ltd. • Sakthi Beverages Ltd. • Schreiber Dynamix Dairies Ltd. • Sree Tulasi Solvent Extractions Ltd. • Vegepro Foods & Feeds Ltd. • Vimal Dairy Ltd.
Plant capacity: 100 MT/DayPlant & machinery: Rs 115 Lakhs
Working capital: -T.C.I: Cost of Project:Rs 660 Lakhs
Return: 26.19%Break even: 53.57%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 17 of 253 | Total 2523 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 252 253   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top