Google Search

Search

Already a Member ?

Best Business Opportunities in Manipur - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Manipur is a state in north Eastern India, with the city of Imphal as its capital. Manipur has been at the crossroads of Asian economic and cultural exchange for more than 2500 years. It has long connected Indian subcontinent to Southeast Asia, enabling migration of people, cultures and religions. Manipur is primarily an agrarian economy, with significant hydroelectric power generation potential.

The natural vegetation occupies an area of about 14,365 km² which is nearly 64% of the total geographical area of the state. The vegetation consists of a large variety of plants ranging from short and tall grasses, reeds and bamboos to trees of various species. Broadly, there are four types of forests - Tropical Semi-evergreen, Dry Temperate Forest, Sub-Tropical Pine and Tropical Moist Deciduous.


DEMOGRAPHIC PROFILE

Manipur has population of 25.7 Lakhs, an increase from figure of 22.94 Lakh. Total population of Manipur as per 2011 census is 2,570,390 of which male and female are 1,290,171 and 1,280,219 respectively.

Total area of Manipur is 22,327 sq. km. Density of Manipur is 115 per sq km which is lower than national average 382 per sq km. In 2001, density of Manipur was 103 per sq km.

Of the total population of Manipur state, around 67.55 percent live in the villages of rural areas. In actual numbers, males and females were 878,469 and 857,767 respectively. Total population of rural areas of Manipur state was 1,736,236. In rural areas of Manipur, literacy rate for males and female stood at 83.39 % and 67.03 %. Average literacy rate in Manipur for rural areas was 76.20 percent. Total literates in rural areas were 1,142,564.

TOURISM

Least touched and least discovered Manipur promises to be the great tourist discovery of the21st century. An oval shaped valley surrounded by blue green hills, rich in art and tradition has inspired description such as the Switzerland of the East with its cascading rapids, tripling rivers, varieties of flowers, exotic blooms and lakes. The people of Manipur include Meitei, Nagas, Kuki-Chin-Mizo and Gorkhas groups and Muslims and other colorful communities which have lived in complete harmony for centuries.

The Ministry of Tourism has five Regional offices located at Kolkata (East), Mumbai (West), Delhi (North), Chennai (South) and Guwahati (North East), which are headed by an officer of the level of Deputy Director General designated as Regional Director.

Domestic tourists intending to visit Manipur by road via Dimapur/Kohima require Inner Line Permits to pass through Nagaland. These are issued by the Liaison officers of the Government of Nagaland at New Delhi, Calcutta, Guwahati, Shillong and the Sub-divisional officer (Civil), Dimapur, deputy Commissioner, Imphal can also issue permits to tourists traveling by road from imphal to Kohima and Dimapur in Nagaland.

INDUSTRY SECTOR

The Information Technology and IT Enabled Services sector in India is looking towards Tier-II and Tier-III cities to meet the growing demands of the industry for sourcing its required skilled manpower. The youth of Manipur have not only excelled in the field of Sports, but have already established a noticeable presence in the ITES industry in India.

Manipur State is striving to score higher on being business-friendly in terms of the available IT infrastructure. These include:

•        Software Technology Parks of India (STPI) unit of Imphal with Earth station and OFC connectivity.

•        Up gradation of IT infrastructure at Imphal to provide modern Business-ready built-up office space for IT/ITES firms.

•        Internet on the move – Various Telcos like BSNL, Tata Indicom, Airtel etc. are providing Wireless Internet across the State.

A high rate of unemployment exists in Manipur, particularly among the educated youth. According to the Live Register of Employment Exchange, the total number of educated job-seekers were recorded as 5, 83.65 thousands.

Manipur is rich in natural resources but due to difficult terrain, inadequate infrastructural facilities and varying climatic conditions, the state could not develop much in the industrial sector of its economy. In the initial stage, Govt. policy in the state was one of revival and revitalization of the traditional handlooms and handicrafts of the local habitats. The contribution of the manufacturing sector to the total gross state domestic product at current prices is found to be 6.17 percent. The trend of industrial development and the present local conditions of the state and in consonance with industrial policy of the Government of India, the Govt. of Manipur in its policy announcement of 1990, has decided to focus attention to the small scale and agro-based industries without discouraging the medium and large-scale industries. It is expected to serve the objective of employment generation and dispersal of industries in rural and urban areas. The state has laid emphasis on creating a strong industrial base and employment opportunities in the state through provision of various growth inducing factors based on locally available resources. It is based on locally available raw materials and minerals. In order to promote rapid industrialization, the State Government has over the years been offering attractive package of incentives and concessions to invigorative industries.

The khadi and Village Industries Commission (KVIC) was established by the Govt. of India in the year 1957. The Khadi and Village Industries is not only providing employment to people in rural and semi-urban areas at low investment per job, but also utilizes local skill resources and provides part-time as well as full time work to rural artisans, women and minorities.

The traditional sector of industries falls within the purview of organizations such as Khadi and Village Industries Commission. The KVIC include artisans in tiny industrial units and defines it as any industry located in a village or town inhabited by population not exceeding 10000 which produces goods and renders services with or without the use of power in which the fixed capital per head does not exceed Rs.15000.

Growth Centres are large villages or small towns which have the potential to become the nuclei for the socio-economic development of the surrounding area. The Growth Centres can be identified by the different orders with respect to the quality and quantity of services and facilities, service area and population. A growth centre of lowest order should have services such as agricultural input centre, primary and middle school, maternity and child care centres and daily market.

Small-Scale Industries (SSI) is an important segment of the economy, contributing substantially in the form of production, employment and exports. It has continued to play a vital role in the fulfillment of socio-economic objectives. The principal factor for defining small-scale Industries has always been based on the size of investment. Small-Scale Industries are those industries whose investment in fixed assets such as plants and machineries does not exceed Rs.100.00 lakhs (Rs.1 Crore). Investment in plant and machinery in respect of industry related Small-Scale Service and Business Enterprises (SSSBE) were increased to Rs.10.00 lakhs from Rs.5.00 lakhs. For speedy growth of small-scale industries, the Government has already brought about simplifications in the SSI registration procedures.

The State Government has introduced this Policy with various components being offered such as, incentives, improved infrastructure facilities, supply of quality power, and credit flow from Bank and Financial institutions, better market linkages and to boost investor confidence.

The Government of Manipur desire Manipur to be a preferred destination for industrial and trade activities and achieving to the aspiration of the people of Manipur, thereby affording to –

•        All round economic development and to improve living standards.

•        To create employment opportunities, skill development and self

•        Employment opportunities.

•        Optimal utilization of both natural and physical resources.

OBJECTIVE OF INDUSTRIAL POLICY

•        Develop adequate infrastructures to ensure planned and accelerated industrial development.

•        Promote maximum capital investment in the State for economic activities resulting in employment opportunities, improving standard of living of people at large and all-round development of the State.

•        Promote modernization and technology up-gradation of existing industrial units.

•        Encourage quality control, standardization and competitiveness of local products.

•        Promote eco-friendly industries.


INDUSTRIAL ACTIVITIES IDENTIFIED AS THRUST AREAS

•             Agro based industry 

•             Bio-Technology industries.

•             Floriculture. 

•             Handloom and Handicraft.

•             Medicinal Plants.

•             Distillation of oils from aromatic plants.

•             Mineral based industries.

•             Information Technology Trade and Commerce under Export Import mechanisms.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 157 of 253 | Total 2523 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 157 252 253   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Lithium Ion Battery (Battery Assembly)

Lithium batteries are now powering a wide range of electrical and electronical devices, including laptop computers, mobile phones, power tools, telecommunication systems and new generations of electric cars and vehicles. Lithium metal batteries and lithium ion batteries. Basically, the difference between them is that lithium metal batteries are those that are not rechargeable, thus, primary, and lithium ion batteries are those that can be recharged. As an example, your laptop or cell phone is likely to have a lithium ion battery, whereas your watch may have a lithium metal battery. During charging, lithium ions (yellow circles) flow from the positive electrode (red) to the negative electrode (blue) through the electrolyte (gray). Electrons also flow from the positive electrode to the negative electrode, but take the longer path around the outer circuit. The electrons and ions combine at the negative electrode and deposit lithium there. The India lithium-ion battery market is expected to grow at a robust CAGR of 29.26% during the forecast period, 2018-2023. The Indian automobile sector is one of the most prominent sectors of the country, accounting for nearly 7.1% of the national GDP. The industry produced a total of 25.31 million vehicles, including commercial, passenger, two, and three vehicles and commercial quadricycle in April-March 2017, as against 24.01 million in April-March 2016. The high cost of lithium-ion batteries was considered earlier as one of the principal difficulties for the implementation of India’s ambitious all-electric vehicle target by 2030. The Indian automobile sector is one of the most prominent sectors of the country, accounting for nearly 7.1% of the national GDP.
Plant capacity: 48 Volt, 20 AH Lithium-Ion Battery Pack: 3498 Nos Per DayPlant & machinery: 5053 Lakh
Working capital: -T.C.I: Cost of Project: 7215 Lakh
Return: 29.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Metal Cutting Wheels (TMT Bar Cutting)

A cut off wheel, also known as a cutoff wheel or cutting disc, is an arbor-mounted tool that may be used with angle grinders or stationary cutoff saws. Cut off wheels have an abrasive-coated material that is used for grinding a range of materials. Wheels typically provide a fast cutting action, long life, and tend to be cost-effective. The two main types of resinoid-bonded abrasive cutting wheels are Type 1, which are flat, and Type 27, which have a raised hub. The abrasive material used in the wheel is one influencer on cut rate and consumable life. The most common size for these cutting wheels is 4-1/2 inches in diameter, however they can range from 2 to 16 inches in diameter with a thickness range from 0.045 in to 0.125 in. Type 1 discs are flat, and type 27 discs have a raised hub. These wheels are strong, but not immune to breaking, if a cutting wheel breaks while in use, fragments could injure the operator or a nearby co-workers. To avoid breaking cutting discs, never exceed the maximum speed (RPM) specified on the disc, and do not overload the disc by cutting with excess force or jamming the wheel into your workpiece. Abrasive Wheels Market by Product (Bonded Wheels and Super Abrasive Wheels) and by Material Type (Aluminum Oxide, Zirconia Alumina, Silicon Carbide, and Ceramic Aluminum Oxide): The global abrasive wheels market was approximately USD 10.9 billion in 2018 and is expected to generate around USD 17.39 billion by 2026, at a CAGR of around 6.01% between 2019 and 2026. The demand within the global market for grinding discs has been rising on account of standardization of industrial procedures in automotive, iron and steel, and constructions industries. A grinding disc, also known as grinding wheel, is used in several abrasive machine operations and in abrasive cutting. Grinding machines are used across a range of industries, and the indispensability of grinding discs in these machines is expected to propel demand within the global market. The proven relevance of these discs across multiple industries has helped in earned the trust of the investors and stakeholders in the market. Few Indian major players are as under: • Anant Cutting Edge Pvt. Ltd. • Sak Abrasive Ltd. • Sterling Abrasives Ltd. • Tyrolit Sak Ltd. • Wendt (India) Ltd.
Plant capacity: Metal Cutting Wheels 8" Size (per packs 5 Pcs.): 5120 Packs per dayPlant & machinery: 143 Lakh
Working capital: -T.C.I: Cost of Project: 323 Lakh
Return: 28.00%Break even: 55.00%
Add to Inquiry Add to Inquiry Basket

Microbrewery

Although the term "microbrewery" was originally used in relation to the size of breweries, it gradually came to reflect an alternative attitude and approach to brewing flexibility, adaptability, experimentation and customer service. The term and trend spread to the US in the 1980s and was eventually used as a designation of breweries that produce fewer than 15,000 U.S. beer barrels (1,800,000 liters; 460,000 U.S. gallons) annually. A microbrewery or craft brewery is a brewery that produces small amounts of beer (or sometimes root beer), typically much smaller than large-scale corporate breweries, and is independently owned. Such breweries are generally characterized by their emphasis on quality, flavour and brewing technique. Beer is globally the third most popular drink after water and tea. Growing at a CAGR of 2.4%, it is projected that the global beer market will reach approximately USD 636 billion by 2020. The Indian beer market is expected to grow and cross 430 billion by the end of 2017, as per the research of All India Brewers’ Association (AIBA). Tapping brewed beer market at cost-effective rates, a variety of innovative startups have aplenty of ideas for diverse flavors, events and apps that could faciliate customers to indulge. The market for microbreweries is still developing. Today, only 4-5 states have established microbreweries that are essentially resto-bars where one can consume fresh-off-the-tap beer that has been brewed in-house. These microbreweries produce between 5,000 and 50,000 litres of beer, a day. Few Indian major players are as under: • Anheuser Busch Inbev India Ltd. • Appollo Distilleries & Breweries Pvt. Ltd. • Arbor Brewing Co. (India) Pvt. Ltd. • Arlem Breweries Ltd. • Arthos Breweries Ltd. • Aurangabad Breweries Ltd. • Castle Breweries Ltd.
Plant capacity: Microbrewery (650 ml Size Bottle): 1538 Nos. per dayPlant & machinery: 171 Lakh
Working capital: -T.C.I: Cost of Project: 397 Lakh
Return: 13.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Craft Beer

"Craft brewing" is a more encompassing term for developments in the industry succeeding the microbrewing movement of the late 20th century. The definition is not entirely consistent but typically applies to relatively small, independently-owned commercial breweries that employ traditional brewing methods and emphasize flavor and quality. Their craft beer, originally made in small batches for consumption at brewpubs, will be initially launched at retail stores in markets such as Goa, Bengaluru, Pune and Gurugram. So far, India has seen just a few craft beer brands such as Bira, White Owl and Simba, sold off shelves despite nearly 170 microbreweries that opened over the past decade. India’s craft beer industry accounts for 2-3% of the country’s beer market which is largely skewed towards the stronger version. The surge of interest in craft beer has been driven by millennials, many particularly interested in this form of beer that is more authentic, premium and has a complex flavour compared to regular lager sold by MNCs. “Brewpubs make good experience centres that help scale a brand. The beer market is rapidly expanding and is expected to reach $9billion in 2018. It is the third largest market in the Indian alcoholic beverages industry. The size of the beer market has virtually doubled every five-and-a-half years. Beer market has been segmented into strong beer and mild beer on the basis of their alcohol content. Beer is globally the third most popular drink after water and tea. Growing at a CAGR of 2.4%, it is projected that the global beer market will reach approximately USD 636 billion by 2020. Few Indian major players are as under: • Anheuser Busch Inbev India Ltd. • Appollo Distilleries & Breweries Pvt. Ltd. • Arlem Breweries Ltd. • Arthos Breweries Ltd. • Associated Breweries & Distilleries Ltd. • Aurangabad Breweries Ltd.
Plant capacity: Craft Beer (Cans & Bottles 650 ml Size): 15384 Nos. per dayPlant & machinery: 1273 Lakh
Working capital: -T.C.I: Cost of Project: 2052 Lakh
Return: 26.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

Chocolate

Chocolate is a key ingredient in many foods such as milk shakes, candy bars, cookies and cereals. It is ranked as one of the most favourite flavours in North America and Europe. Despite its popularity, most people do not know the unique origins of this popular treat. Chocolate is a product that requires complex procedures to produce. The chocolate and confectionery products industry has traditionally been subject to significant fluctuations in demand. Chocolate products tend to be seasonal in nature, with demand increasing sharply during the holidays. Consumers of all age groups prefer chocolate and confectionery products because of their attractive appearance and colour. Chocolate, candy and gum are some of people’s best-loved treats. These sweets have been enjoyed around the world for thousands of years. Early man developed a taste for sweets by digging honey from beehives. The chocolates market in India is estimated at around 45,000 tonnes valued at approximately Rs. 15.0 bn. The counter market is estimated at about Rs. 5 to 7 bn and the rest is made up of chocolate bars. Chocolates make up less than a fourth of the sweet-tooth products including sugar-boiled confectionery, mints and chewing gums. Sugar confectionery is by far the largest segment. As chocolates remain an impulsive buy to the extent of 75%, the Indian chocolate market is estimated today at nearly Rs. 200 bn over (USD 4.40 bn) and is growing at 20%. The global market is estimated at USD 80 bn. So far, mainly an urban-oriented product, the rural segments is unfolding a huge potential having already provided a 35% share of the market. Few Indian major players are as under: • Barista Coffee Co. Ltd. • Cocoa Products & Beverages Ltd. • Dukes Consumer Care Ltd. • Gandour India Food Processing Pvt. Ltd. • Global Consumer Products Pvt. Ltd. • Inbisco India Pvt. Ltd. • Lotte India Corpn. Ltd.
Plant capacity: Chocolate: 4000 Kgs. per day Toffee: 1200 Kgs. per day Candy: 1200 Kgs. per dayPlant & machinery: 273 Lakh
Working capital: -T.C.I: Cost of Project: 600 Lakh
Return: 28.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Synthetic Camphor

Camphor is a waxy, flammable, white or transparent solid with a strong aroma. It is a terpenoid with the chemical formula C10H16O. It is found in the wood of the camphor laurel (Cinnamomumcamphora), a large evergreen tree found in Asia and also of the unrelated kapur tree, a tall timber tree from the same region. This port traded in camphor extracted from laurel trees (Cinnamonum camphora) that were abundant in the region. Even now, the local tribespeople and Indonesians in general refer to aromatic naphthalene balls and moth balls as kapur Barus. Camphor can be produced from alpha-pinene, which is abundant in the oils of coniferous trees and can be distilled from turpentine produced as a side product of chemical pulping. With acetic acid as the solvent and with catalysis by a strong acid, alpha-pinene readily rearranges into camphene, which in turn undergoes Wagner-Meerwein rearrangement into the isobornylcation, which is captured by acetate to give isobornyl acetate. The global market for synthetic camphor is estimated to be valued at US$ 322.3 Mn by the end of 2018 and is expected to reach a market value of US$ 571.6 Mn by the end of 2028, expanding at a CAGR of 5.9% over the forecast period. The global market is anticipated to represent incremental opportunity worth US$ 249.3 Mn between 2018 and 2028. Synthetic camphor is used in production of insecticides such as moth repellants and mosquito repellants. With the rising awareness around the air purifying properties of synthetic camphor, the demand for synthetic camphor powder has seen an upsurge from the downstream producers of synthetic camphor tablets. Synthetic camphor is conventionally prepared from the extracts of the camphor tree. While the one produced using chemical synthesis is known as synthetic camphor. One of the most important raw material employed in the manufacturing of synthetic camphor is turpentine oil. Synthetic camphor involves two grades of products solely differentiated in the terms of its purity. Few Indian major players are as under: • Camphor & Allied Products Ltd. • KanchiKarpooram Ltd. • Mangalam Organics Ltd. • Oriental Aromatics Ltd. • Oriental Aromatics Ltd. • Saptagir Camphor Pvt. Ltd. • Vinayak Ingredients (India) Pvt. Ltd.
Plant capacity: 2,500 MT per AnnumPlant & machinery: 359 Lakh
Working capital: -T.C.I: Cost of Project: 1192 Lakh
Return: 28.00%Break even: 51.00%
Add to Inquiry Add to Inquiry Basket

Manufacturing of ABC (Aerial Bundled Cable) Conductors

Manufacturing of ABC (Aerial Bundled Cable) Conductors. Investment Opportunities in Overhead Power Distribution Sector. Aerial bundled conductors or simply ABC are overhead power lines using several insulated phase conductors bundled tightly together, usually with a bare neutral conductor. Aerial Bundled Cable (ABC) is an innovative concept for Over Head (OH) power distribution. This variation of overhead power lines utilizes the same principles as bundled conductors, except that they are closer together to the point of touching but each conductor is surrounded by an insulating layer (except for the neutral line). Aerial Bundled Conductor cables can be used to replace bare conductor cables in overhead distribution systems. It is ideal for use in urban areas with congested power distribution and narrow lanes and by-lanes. The latest systems are used in the construction of ABC cables and intensive quality testing is done to ensure safety and reliability. Type of Aerial Bundled Conductor:- ? Above 1kv ? 1-15kv ? Above 15kv Advantages:- ? Relative immunity to short circuits caused by external forces (wind, fallen branches), unless they abrade the insulation. ? Can stand in close proximity to trees/buildings and will not generate sparks if touched. ? Little to no tree trimming necessary ? Simpler installation, as crossbars and insulators are not required. ? Ease of erection and stringing, less labor intensive, less construction resources needed. ? More aesthetically appealing. ? At junction poles, insulating bridging wires are needed to connect non-insulated wires at either side. ABC can dispense with one of these splices. ? Less risk of a neutral-only break from tree or vehicle damage, increasing safety with TNC-s systems. ? Significantly improved safety for linespersons, particularly when working on live conductors. ? Electricity theft is made harder, and more obvious to detect. ? Less required maintenance and necessary inspections of lines. ? Improved reliability in comparison with both bare conductor overhead systems and underground systems. Insulated conductors prevent accidental contact and supply can be maintained temporarily in the event of a suspension system collapse. Related Projects: - Wire & Cable Projects Market Outlook In the field of product application, environmental protection has become the common external pressure and development trend faced by cable manufacturers all over the world in recent years. The United States, Japan and Europe are in the leading position and development and manufacture of environmental-friendly cables in the world, and the production technology is relatively mature. By the European Union requires that harmful substances such as lead, mercury, cadmium, hexavalent chromium, polybrominated diphenyl ethers and polybrominated biphenyls be prohibited from being used in new electronic and electrical equipment put on the market. The worldwide Aerial Bundled Cable market size (value, capacity, production and consumption) in key regions like United States, Europe, Asia Pacific (China, Japan) and other regions. Aerial Bundled Cables are overhead power lines using several insulated phase conductors bundled tightly together, usually with a bare neutral conductor. Cables & Conductors are one of the essential components required for the development and strengthening of any country’s T&D network. The cables and conductors market in India has grown at a significant rate in the past few years on the back of investments in the power and infrastructure sectors. The current manufacturing base is well established with a large number of organized players. As of today, due to growing emphasis on developing a robust T&D network in the country to meet the rising demand for reliable power, a number of government initiatives and programmers have been undertaken that have helped create a positive market for cables and conductors in the country. As per various estimates, it is expected that the industry which has been growing at the rate of around 15 percent currently will start growing at the CAGR of over 20 percent over the next five years. Though increasing industrialization and growing population requirement for reliable and efficient power supply have kept demand high for cables and conductors. Going forward, looking the investments infused in the power and infrastructure sectors by the government and various initiatives undertaken, this demand trend is expected to continue for the industry in the future as well. The world's market value of cables has reached around $181.3 billion in 2018 which increased by 4%. It is projected to reach about $210.47 Billion in 2021, at a CAGR of 4.5-5 percent, from 2018 to 2021. Increasing demand for electricity in the emerging and developed countries, backed by increasing investment in infrastructure, is expected to drive the cables market globally. However, slowdown of economy and regulatory policies for interconnection arrangements have been hindering the market growth. Urbanization is one of the major reasons for the overall growth of the cables market. The need for power grid interconnections in densely populated areas is creating a demand for submarine and underground cables. The underground cables reduce space required and offer reliable transmission of electricity. Environmental regulations that observe the impact of electrical cables on the environment, the safety of electrical installations, implications for the health of the materials used for cable manufacturing have led to various innovation and new product development. These regulations have encouraged the introduction of new products such as halogen-free flame retardant compounds and implement new processes with low energy consumption and efficient use of raw materials. Market & Technology:- Overall, the cables and conductors industry has grown significantly in the past few years with investments infused in the power and infrastructure sectors by the government. While the cable segment witnessed a positive growth, the conductor segment experienced sluggish demand last year. Across cable sub-categories, the power cables segment registered a growth of 5.2 percent in 2016-17, while the control cables segment saw a decline of 3.4 percent. However, the first half of 2017-18 saw a reversal of trends wherein the high voltage power cable growth tumbled by 7 percent and the control cable segment grew by 2.9 percent. The cable segment is the shift towards high voltage transmission lines. This demand is essentially driven by the creation of high capacity long distance corridors to deliver electricity to high demand regions and the development of green energy corridors for integrating the increasing share of renewable energy into the grid. Further, underground cabling is gaining increased acceptance among state and central transmission utilities as it provides greater safety (against electrocution) as compared to overhead cables. On the technology front, the industry is witnessing a number of new technology being introduced to enable utilities to augment their capacities without encountering the issues of right-of-way (Row) clearances. Further, due to the risks associated with bare overhead cables, covered cables have been gaining importance in the market. Cross-linked polyethylene (XLPE), high-density polyethylene, aerial bunched cables and spacer cable systems are some of the most commonly used covered cables. In addition, an emerging technology trend of high-temperature low sag (HTLS) conductors is witnessing a greater adoption by the utilities. These conductors not only enhanced the operational efficiency but can also be used for the purpose of reconductoring the existing lines that enable utilities to transmit a higher quantum of power through existing corridors and can significantly scale down losses as well as instances of power outages. Further, to increase the current carrying capacity and scale down the transmission losses, utilities are turning to high-temperature superconductors (HTS) that have 5 to 10 times the current carrying capacity as compared to conventional conductors. Gas-insulated lines (GILs) that can be installed under the ground as well as in tunnels and trenches are today a well-accepted technology trend in the overseas market. Due resistive losses of GILs being lower than overhead lines and other types of underground cables, they offer greater reliability with no risk of fire. This technology can serve as a viable alternative to overhead lines where Row is not available for the transmission of electricity. However, it is still waiting to see a widespread adoption in the domestic market. Applications: ? Power System ? Industrial Use ? Commercial Use ? Residential Use Medium voltage Aerial bundled cables are mainly used for secondary overhead lines on poles or as feeders to residential premises. Cable market by application is categorized into Internet data transfer, video distribution and radio frequency transfer. Data is transferred at high speed over internet using coaxial cables. This data transferred over internet includes applications, videos, audio, documents, etc. Many high speed fiber internet connections are also using coaxial technology. These coaxial cables are also widely used in television cable industry and do have wide application in radio frequency transfer. The absence of interference in coaxial cable is what makes it one of the most reliable choices for transmitting radio signals. Aerial Bundled Conductor cables can be used to replace bare conductor cables in overhead distribution systems. It is ideal for use in urban areas with congested power distribution and narrow lanes and by-lanes. The flexible system is much easier than conventional overhead power lines to re-route when demanded by changes in urban development plans. We can provide you the best aerial bundled cable price, you can contact us. It provides a higher level of safety in difficult terrain including forest areas, coastal areas, and hilly areas. In climates with a high level of moisture accelerated tree growth becomes a significant problem increasing the risk of bush fires. If aerial bundled conductors are touched by tree branches they will not arc over. There are many types of ABC cable, but their application is the same. Key Players: Nexans France, ZMS Cable Group, EMTA Conductor and Cable, Feiniu Cable, Fifan Cable Group, JYTOP Cable, Anamika Conductors, Tonn Cable Sdn Bhd, Huatong Cable, Jiangsu Boan Cable, Jinshui Cable Group, Henan Tong-Da Cable, Luoyang Da Yuan Cable, China Anhui Electric Group Shares, People's Cable Group, Shanghai Bluewin Wire and Cable, Hengfei Cable, WuXi Jiangnan Cable, Zhejiang Kukun Group, Zhengzhou Jinyuan Wire and Cable Group, Huadong Cable Group. Tags #AerialBundledCables #bundledcables #BundledConductors #WireAndCable #projectreport #DetailedProjectReport #businessconsultant #businessfeasibilityreport #BusinessPlan #cableproducts #cableindustry #electricity #electricalindustry
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Manufacturing of Biomass Briquettes from Biowaste.

Manufacturing of Biomass Briquettes from Biowaste. Profitable Investment in Agro Waste Briquette Industry. Turning Waste into Energy Biomass briquettes are a biofuel substitute to coal and charcoal. Briquettes are mostly used in the developing world, where cooking fuels are not as easily available. There has been a move to the use of briquettes in the developed world, where they are used to heat industrial boilers in order to produce electricity from steam. The briquettes are cofired with coal in order to create the heat supplied to the boiler. Biomass feed, especially agro-residues, is available in different forms, such as husks, straw, and stalks of various and numerous crops. Due to this heterogeneous nature, the utility of these materials for energy becomes limited, and energy conversion processes tend to become biomass specific. Biomass briquettes are a proven way of generating energy from bio-waste. Type of Biomass Briquette:- Sawdust Briquettes Agro waste Briquettes Wood Briquettes Different types of waste have been utilized in order to develop biomass briquettes. Biomass briquettes derived from Mustard, Cotton, Guar, Saw Dust and Peanut shell Agro waste could result in feasible on-site fuel production. Biomass briquettes can typically provide between 3-15 per cent of the input energy into the power plant. The objective behind the move, is to reduce air pollution caused due to burning of surplus biomass residue in fields by creating an alternate market for its large-scale utilization in power plants as well as reduce carbon emission from coal fired power plants. Developing economies is the key sources for generating air pollution, as most of its population is reliant on wood and other fossil fuel such as kerosene and charcoal to meet their domestic energy needs. In addition, the growing percentage of carbon monoxide, carbon dioxide, and other harmful gases in the environment is the chief reason for global warming. Growing air pollution and environmental protection has grown concerns across the globe. Thus, growing environmental concerns have pushed the need for biomass briquettes. Biomass briquette production is developed recently. It is a kind of technology to obtain clean coal, as per the use of bio waste to create usable and effective briquettes to replace traditional firewood and charcoal in various domestic activities Uses:- Biomass briquettes are mostly used in the developing world, where cooking fuels are not as easily available. There has been a move to the use of briquettes in the developed world, where they are used to heat industrial boilers in order to produce electricity from steam. The briquettes are cofired with coal in order to create the heat supplied to the boiler. Biomass briquettes, mostly made of green waste and other organic materials, are commonly used for electricity generation, heat, and cooking fuel. These compressed compounds contain various organic materials, including rice husk, bagasse, ground nut shells, agricultural waste. The composition of the briquettes varies by area due to the availability of raw materials. The raw materials are gathered and compressed into briquette in order to burn longer and make transportation of the goods easier. The Benefits of Biomass Briquettes:- Nowadays, everyone is thinking about how to make their homes greener and how to save energy. Everyone is now aware of the problems presented by global warming and we are all thinking of ways to change our lifestyles in order to help stop this phenomenon and keep our world safe. This is why biomass briquettes are important. The main source of energy for most areas of the world is fossil fuel, which usually is makes use of coal in order to power boilers to make steam for energy. Briquettes made from biomass are a great substitute for coal, since they are made of natural materials and do not add to the pollution in the world. Because of the production of briquettes, many companies use biomass briquettes since they found out about its benefits and how it can lower their carbon footprint while being affordable. These briquettes are cheaper than coal in the long run, and can be used for a long time. Coal is one of the most dangerous ways to produce energy nowadays because of its pollution to our environment. This is why it is necessary for us to limit our use of charcoal and find another way to get energy. Biomass is a great way to do this since it is easy to get and use. Usually, the briquettes are made from plants and natural waste from animals. It recycles them and turns them into an energy source, so they are an ideal material. They do not have any of the disadvantages of fossil fuel energy, and it is easily renewable. It does not emit greenhouse gases or any toxic chemicals. The biomass materials are compressed into briquettes so that they can be used by energy producing companies to replace charcoal. These burn just like charcoal but they do not produce any harmful effects to the environment. They can be used to boil water and power turbines to generate electricity. In the modern world, everyone needs electricity. It is a very much sought-after utility, since we rely on technology that runs on electricity to live our lives. Because of this need, people resorted to using fossil fuels to power cities. But briquettes from biomass can change all of this. Biomass also gets rid of the need to have fossil fuels exported and imported around the world, since it can be made domestically from plants and animal waste. This will lower the price of electricity for many countries that do not have oil or coal reserves. It will mean affordable and safe energy for everyone. Briquettes are better than loose biomass since they are compressed. This compression allows them to burn for a lot longer than if it was loose. Also, it does not take too much money to compress these so it will be inexpensive for people to attain. Related Projects: - Waste Management and Recycling, Industrial Waste Management, Agro Waste Market Outlook Biomass briquette is commonly made of green waste and other natural materials. These are generally used to create power, heat, cooking fuel, and work industrial boilers with a specific end goal to make power from steam. The most recognized usage of briquettes is in emerging economies, where energy sources are not as generally accessible. These compacted or strong compounds contain different organic materials, including rice husk, bagasse, ground nutshells, city strong waste, rural waste, or other wastes with high nitrogen content. The demand for fuel in emerging economies and improved renewable energy source appeal drive the biomass briquette market. However, low energy output when compared to others industrial fuels and limited awareness hamper the market growth. Currently, various trends seen in the global market that has risen the demand for biomass briquettes are its advantages over other fuels, low ash content as compared to charcoal and coal, cost-effective, and is sulfur free. Moreover, low environmental effect, uniformity in combustion, higher boiler efficiency due to low moisture content and high density has increased its demand across the globe. The popularity of piston or ram press and screw extrusion machines are the most preferred technologies used for producing high-pressure biomass briquettes. Biomass briquettes have a high potential to substitute coal in most boiler and power applications and have a high combustion rate that has increased its demand on a large scale. At present, in developed countries the Biomass Fuel industry is generally at a more advanced level. The world's large enterprises are mainly concentrated in EU. Meanwhile, foreign companies have more advanced equipment, strong R & D capability, and leading technical level. With the development of Chinese Biomass Fuel industry production technology, their share in the international market is increasing, and competitiveness in the international market gradually increases. The global Biomass Briquette market is valued at 320 million US$ in 2017 and will reach 570 million US$ by the end of 2025, growing at a CAGR of 7.3% during 2018-2025. The global biomass briquettes market is segmented into North America, Latin America, Western Europe, Eastern Europe, the Middle East and Africa, and Asia Pacific. Of these regions, Europe and North America are expected to be key regions for the growth of this market. The utilization of the biomass briquettes production technologies is high to convert their biomass into useful energy sources. Biomass molding fuel is made of agricultural and forestry residues such as rice stalk, straw, cotton stalk, bamboo sawdust, wood flour, ramie stalk, peanut husk, etc. It is produced by pellet machines or briquetting machines, after going through several processing procedures, such as crushing, drying, mixing, molding or compressing, etc. And the final products are pellets and briquettes, which are used as a replacement for coal, gasoline gas and other traditional fossil fuels. Compared to fossil fuels, biomass molding fuel produce low net total greenhouse gas emissions because the materials used are already a part of the carbon cycle. Biomass pellet fuel are biofuels made from compressed organic matter or biomass. Wood pellets are the most common type of pellet fuel and are generally made from compacted sawdust and related industrial wastes from the milling of lumber, manufacture of wood products and furniture, and construction. Other industrial waste sources include empty fruit bunches, palm kernel shells, coconut shells, and tree tops and branches discarded during logging operations. Biomass pellets are usually utilized in home pellet stove, central heating boiler, industrial boiler, or in power plants to replace coal. They can also be used as horse bedding and cat litter. However, biomass briquettes are sticks or blocks with large diameter and different shapes (hexagon, cylinder, cuboid, etc.) made by biomass briquette machines. They are primarily for industrial use for heating. Related Books: - Waste Management, Waste Disposal and Recycling Industry Key Players:- ? Enviva ? Pacific BioEnergy ? German Pellets ? RWE Innogy ? Drax Biomass ? General Biofuels ? Pfeifer Group ? Biomass Secure Power ? Energex ? Westervelt Tags:- #projectreport #DetailedProjectReport #businessconsultant #businessfeasibilityreport #BusinessPlan #BiomassBriquettes #biofuel #waste #recycling #biowaste #agriculturewaste #WasteManagement #ewaste #SolidWaste #WasteWater #IndustrialWaste #foodwaste #bioproducts #NPCS
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

White Petroleum Jelly Manufacturing Business

White Petroleum Jelly Manufacturing Business. Production of White Petroleum Jelly from Crude Oil. Petroleum Jelly is additionally referred to as petroleum jelly or mineral jelly. It’s largely utilized in emulsion type in cosmetics & pharmaceutical for the preparations of various creams, ointments, lotions etc. industrial petroleum jelly is used within the manufacturing of lubricants & Grease. Petroleum jelly of excellent quality utilize in petroleum jelly producing. It’s additionally used as a moisturizer in sensible quality rest room soaps. It additionally finds its use as a opposed oxidization agent for iron merchandise like blade, wire Surgical instruments etc. it's on the market within the market in various forms. It should be white, yellow, and green or is also of some color relying upon ingredients used. White petroleum jelly, which may be utilized in cosmetics and pharmaceuticals. Therefore strict quality control is needed for the manufacturing of this item. Petroleum jelly is created by the waxy petroleum material that formed on oil rigs and distilling it. The lighter and agent oil-based product form up petroleum jelly, additionally known as white petrolatum or just as petrolatum. Basically, the crude material undergoes vacuum distillation. The still residue is then filtered through animal charcoal to yield petroleum jelly. Uses It is a helpful material once incorporated into candle wax formulas. The petroleum jelly softens the general mix, allows the candle to include further fragrance oil, and facilitates adhesion to the sidewall of glass. Petroleum jelly was formerly used as the simplest way to pitch a spitball in baseball. Petroleum jelly utilize to moisten synthetic, as a part of a combination of hydrocarbons together with larger (paraffin wax) and lesser (mineral oil) molecular weights. Medical Treatment: - Chesebrough originally promoted Vaseline primarily as an ointment for scrapes, burns, and cuts, but studies have shown that Vaseline has neither medicinal effect nor any effect on the blistering process, nor is it absorbed by the skin. Vaseline brand First Aid Petroleum Jelly, or carbolated petroleum jelly containing phenol to give the jelly additional antibacterial effect. Acting as a sunscreen, it provides protection against ultraviolet rays. Petroleum jelly's effectiveness in accelerating wound healing stems from its sealing effect on cuts and burns, which inhibits germs from getting into the wound and keeps the injured area supple by preventing the skin's moisture from evaporating. A verified medicinal use is to protect and prevent moisture loss of the skin of a patient in the initial post-operative period following laser skin resurfacing. Petroleum jelly is used extensively by otolaryngologists - head and neck surgeons for nasal moisture, epitasis treatment as well as to combat nasal crusting. Skin and Hair Care: - Most petroleum jelly today is used as an ingredient in skin lotions and cosmetics, providing various types of skin care and protection by minimizing friction or reducing moisture loss, or by functioning as a grooming aid. Moisture Loss: - By reducing moisture loss, petroleum jelly can prevent chapped hands and lips, and soften nail cuticles. Petroleum jelly can be used to keep swimmers warm in water when training or during channel crossings or long ocean swims. It can prevent chilling of the face due to evaporation of skin moisture during cold weather outdoor sports. Hair Grooming: - petroleum jelly, either pure or as AN ingredient, was additionally popular as a hair pomade. Once utilized in a 50/50 mixture with pure beeswax, it makes an efficient moustache wax. It’s used as a key ingredient for conditioners of Afro-textured hair Skin Lubrication:- petroleum jelly is accustomed reduce the friction between skin and clothing throughout varied sport activities, for instance to forestall chafing of the seat region of cyclists, the nipples of long distance runners wearing loose t-shirts, and is usually utilized in the crotch space of wrestlers and footballers. Petroleum jelly is usually used as a private lubricating substance. • Inks • Pharmaceutical Products • Cosmetic • Paints and Coatings • Textile and Leather • Personal Car Application sector:- Petroleum jelly is an ingredient in many cosmetics and lotions. Originally it was marketed as a burn ointment. Petroleum jelly also may be applied to dry or chapped skin to seal in moisture. A variation known as red veterinary petroleum confers some protection against UV (ultraviolet) exposure and has been used as a sunscreen. • Pharmaceuticals/ Cosmetics industry • Jelly filled cable • Leather industry • Rubber industry • Other miscellaneous application including rust prevention etc. Petroleum jelly white / yellow IP uses are as follows: • Skin ointment / Skin cream • Hair Vaseline • Pain balm • Cold cream and cosmetic preparations • Ophthalmic ointment • Vaporub Ointment Market Outlook Various Cosmetics and pharmaceuticals are used by the large number of people in general for wounds, cuts, burns, skin diseases. In today’s business word, more and cosmetics industries are coming up and thereby increasing the demand for the raw materials like petroleum jelly. Hence it can be assumed that the petroleum jelly is having very good market potential in view of development of cosmetic & pharmaceutical industry in India. Based on region, the worldwide petroleum jelly market will be classified into North America, Asia Pacific, Europe, geographic area, and Middle East & Africa. North America is projected to make substantial contributions toward the growth of the general marketplace for petroleum jelly within the near future. Being one in all the most important manufacturers of pharmaceutical and cosmetic product across the world, the U.S. is anticipated to steer the North America petroleum jelly market. As countries like China, Japan, and Asian nation witness high demand for petroleum-jelly-based pharmaceutical and cosmetic product. Increase in the demand for pharmaceutical and cosmetic products is expected to drive the global petroleum jelly market in the near future. Petroleum jelly forms a sealing barrier on dry and damaged skin, which locks the moisture and helps in speeding up natural recovery process of the skin. This generates high demand for petroleum jelly in pharmaceutical and cosmetics industries. Petroleum jelly is an excellent anti-rusting agent and water repellant. It is odorless and inert. These properties of petroleum jelly is expected to drive the market. Since industries such as marine, leather, telecommunications, and manufacturing require petroleum jelly for several applications wherein rusting or water can cause severe damage to equipment and operations. Thus, use of petroleum jelly helps these industries to overcome challenges in an efficient manner. Production Processes:- Petroleum jelly is a useful material when incorporated into candle wax formulas. The petroleum jelly softens the overall blend, allows the candle to incorporate additional fragrance oil, and facilitates adhesion to the sidewall of the glass. Petroleum jelly is used to moisten nondrying modeling clay such as plasticine, as part of a mix of hydrocarbons including those with greater (paraffin wax) and lesser (mineral oil) molecular weights. It can be used as a release agent for plaster molds and castings. It is used in the leather industry as a waterproofing cream. It can be used for tinder, lightly coated on a cotton ball. It has been used as a secondary ingredient in a Molotov cocktail, to make the flames stick to any surface they touch and to make large amounts of smoke. Key Players:- ? Unilever ? Sonneborn LLC ? Sasol ? Raj Petro ? Eastern Petroleum ? Persia Paraffin ? Sovereign Chemicals & Cosmetics ? Unisynth Group ? Shimi Taghtiran Company Tags:- projectreport DetailedProjectReport businessconsultant businessfeasibilityreport BusinessPlan startupidea StartupProject startyourjourney entrepreneur WhitePetroleumJelly CrudeOil PetroleumJelly smallbusiness
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Production of Steel Shots & Grits.

Production of Steel Shots & Grits. Begin Your Business in Industrial Steel Abrasives. Steel abrasives are steel particles that are used as abrasive or peening media. They are usually available in two different shapes (shot and grit) that address different industrial applications. Steel shot and grit are used in surface preparation process for cleaning metal surfaces which are covered with mill scale, dirt, rust, or paint coatings and for physically modifying the metal surface such as creating roughness for better application of paint and coating. Steel grit is an abrasive material that is used to abrade surfaces in a process known as abrasive blasting. Steel grit is jagged in shape, which allows it to abrade materials extremely well. Steel grit comes in many different chemical forms and sizes and is made by crushing steel shot. Steel shot or grit is usually available at different hardness levels, ranging between 40 and 65 on the Rockwell scale (400 to 850 on the Vickers hardness scale). Related Project: - Engineering Goods Projects Industrial Uses:- Steel shot and grit cope with numerous sectors seeing that cleaning, floor coaching or shot peening applications are used by many industries as a part of their construction, protection or repair processes. The foremost commercial sectors employing metallic abrasives are:- ? Automotive industry ? Construction ? Metallurgy ? Petrochemical industry Industrial Applications:- Cleaning: - Steel shot and grit are used in cleansing packages for elimination of loose fabric on steel surfaces. This sort of cleaning is common in automobile industry (motor blocks, cylinder heads, etc.). Surface Preparation: - Surface preparation is a chain of operations including cleansing and bodily change of a floor. Steel shot and grit are used in floor guidance technique for cleansing metallic surfaces that are protected with mill scale, dirt, rust, or paint coatings and for bodily modifying the steel surface such as developing roughness for higher software of paint and coating. The steel shots are normally employed in shot blasting machines. Stone Cutting: - Steel grit is utilized in cutting difficult stones, which includes granite. The grit is utilized in large multi-blade frames which cut the blocks of granite into thin slices. Shot Peening: - Shot peening is the repeated putting of a metal floor by tough shot particles. These multiple impacts produce a deformation on the metal floor but also improve the durability of the metallic part. The media used in this application is spherical in preference to angular. The purpose is that round shots are more resistant to the fracture which happens due to the striking impact. Other Applications:- • Water Jet Cutting • Abrasive Blasting • Water Filtration • Abrasive Powders Market Outlook The steel abrasives market is expected to grow at a good rate in the coming years. Rapid industrialization and expansion of automotive production are the key trends stoking market growth. To decrease environmental issues, leading manufacturers in the automobile sector are manufacturing low-weight products, which emit low carbon dioxide, which are economical and yet provide superior performance. Leading abrasive manufacturers look to capitalize on this trend by offering products that provide high quality auto components with a polished surface finish. The global Steel Grit market size was million US$ in 2019 and is expected to million US$ by the end of 2026, growing at a CAGR of between 2020 and 2026. The Steel Grit market growth is predicted at a rapid rate in the coming years, all the major regions across the globe such as North America, Europe, South America, the Middle East, and Africa and the Asia Pacific. Europe and North America regions are anticipated to show an upward growth in the years to come. While Steel Grit market in Asia Pacific regions is likely to show remarkable growth. Cutting edge technology and innovations are the most important traits of the North America region and that’s the reason most of the time the US dominates the global markets. Steel Grit Market in South, America region is also expected to grow in near future. The demand of steel shots and grits increase with the growth of steel forging and foundry industries. The steel industry is expected to make rapid growing in few years. Its production is likely to be doubled during the next 7-8 years. One of the fundamental properties an abrasive must possess is hardness and that it must be harder than the material to which is polished, ground or removed. The rapid expansion of automotive production is one of the critical trends increasing market growth. Furthermore, investments in R&D activities to produce innovative and less hazardous abrasives are expected to provide opportunities for growth in the future. Key Players:- ? Marco Group International ? Abrasives Inc. ? Vulkan INOX GmbH ? Metaltec Steel Abrasive ? BLASTRAC ? Abrasive Shot ? Airblast Abrasives ? W Abrasives ? Airblast ? 3M India Ltd. ? Grindwell Norton Ltd. • Hi-Tech Recycling (India) Pvt. Ltd. • Orient Steel & Inds. Ltd. • Rotocast Industries Ltd. • Silcal Metallurgic Ltd. • Vinayak Steels Ltd. Tags:- #projectreport #DetailedProjectReport #businessconsultant #businessfeasibilityreport #BusinessPlan #SteelShots #SteelGrits #Abrasiveblasting #steelproducts #ReinforcedSteel #SteelIndustry #iron
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 157 of 253 | Total 2523 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 157 252 253   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top