REQUEST A QUOTE
REQUEST A QUOTE

Google Search

Search

Already a Member ?

Register Now!

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

•        Simplify procedures and expedite granting of mining leases.

•        Provide certain relief to make mining activities easier.

•        Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

•        Encourage joint venture projects with SMDC.

•        Clear mining lease applications and project report within 60 days.

•        Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

•        Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

 

 

 

Agro-Based Industries: Project Opportunities in Jharkhand

 

 

PROFILE:

 

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

 

 

 

GOVERNMENT POLICIES:

 

 The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

 

 

 

 Sericulture (Tasar Silk): Project Opportunities in Jharkhand

 

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

 

Steel Industry

 

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

 

 

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory  is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

 

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Rural Industries: Project Opportunities in Jharkhand

 

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

 

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1.       Providing ample employment opportunities through rural industries.

2.       Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3.       Giving priority to participation of women in development of rural industries.

4.       Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5.       Implementing cluster approach.

6.       Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7.       Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

 

 

Tourism: Project Opportunities in Jharkhand

 

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 249 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 249 336 337   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Municipal Waste Treatment

Municipal Solid Waste management is one of the most vital issues in the contemporary urban environments particularly in developing countries. The estimated quantity of Municipal Solid Waste (MSW) generated worldwide is 1.7-1.9 billion metric tons. In many cases, municipal wastes are not well managed in developing countries, as cities and municipalities cannot cope with the accelerated pace of waste production and waste collection rates are often lower than 70 per cent in low-income countries. More than 50 per cent of the collected waste is often disposed of through uncontrolled land filling and about 15 per cent is processed through unsafe and informal recycling. In most urban centers of developing countries, municipal solid waste management (MSWM) is highly unsatisfactory and beyond the capabilities of their economic setup for handling and disposal. Hence, the issue of MSWM is major concern in many urban areas of low-income developing countries, though their waste generation is low in comparison with middle income and industrialized countries. Solid waste generation: Currently the daily solid waste generation in the city of Addis Ababa is estimated to be 0.5 kg per capita per day, the density ranges from 205 to 370 kg m-3 and the daily waste generation has reached to 2,750 m3. Therefore, considering the city’s population of 3.5 million people, it is estimated that approximately one million m3 of solid waste is generated per year. The global waste management market size is expected to reach $530.0 billion by 2025 from $330.6 billion in 2017, growing at a CAGR of 6.0% from 2018 to 2025. Waste management is the process of treating solid wastes, and involves different solutions to recycle items. It includes activities from its inception to final removal, such as collection, transport, treatment, and disposal of waste along with inspection and regulation. Increase in environmental awareness, rapid industrialization, surge in population, and rise in urbanization foster the growth of the global waste management market. In addition, implementation of stringent government norms toward open dumping is expected to fuel the waste management market growth. Furthermore, uncollected waste and dumping are impacting on health directly or directly, which is expected to increase demand for waste management services. However, lack of awareness in developing countries and dearth of investments in solid waste management framework impede the growth for waste management industry analysis. The impact of the driving factors is expected to surpass that of the restraints; hence, the market is projected to grow at a CAGR of 6.0% from 2018 to 2025. The market includes domestic consumables mainly furniture, product packaging, clothing, grass clippings, bottles, newspapers, food scraps, and appliances. These scraps mainly originate from several schools, homes, hospitals, and other commercial establishments. The demand for municipal solid waste management across the residential sector will witness significant gains on account of the ongoing urbanization along with increasing consumer spending toward manufactured goods.
Plant capacity: Organic Compost :300 MT / Day Refuse Derivated Fuel (RDF): 66.7 MT / Day Plastics: 20 MT / Day Inerts: 86.7 MT / Day Recyclables: 73.3 MT / DayPlant & machinery: Rs 2038 lakhs
Working capital: -T.C.I: Cost of Project: Rs 3239 lakhs
Return: 26.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through the circulatory system. These fluids must be sterile to protect patients from injury, and there are a number of different types available for use. Many companies manufacture packaged intravenous fluids, as well as products which can be mixed with sterile water to prepare a solution for intravenous administration. Fluids are given when someone's body fluid volume falls. There are a number of things which can cause a drop in fluid volume. Vomiting and diarrhea are a classic example, which is why people are encouraged to drink fluids when they are sick, to keep their fluid volume stable. Another cause is blood loss, which causes problems both because people lose blood products, and because they experience a loss in fluid volume. Electrolyte levels in the blood can also become unstable as a result of rapid changes in fluid volume, in which case intravenous fluids can be used to restore the balance. The global Intravenous (IV) solutions market was valued at USD 6.9 billion in 2015 and is projected to grow at a CAGR of 7.8% over the forecast period. The emergence of this market is attributed to the fast growing geriatric population and prevalence of malnutrition in the elderly and pediatric population. Intravenous (IV) solutions are fluids which are intended to be administered to a patient directly into the venous circulation. These fluids are sterile fluids which protects patients at the time of serious dehydration. There are various type of IV solutions available for use in the market. Many companies manufactures packaged intravenous fluids or products or compounds which can be mixed with sterile water to prepare a solution for intravenous administration. The market for Intravenous (IV) Solution is expected to reach USD 11,511.2 million by 2022 and is expected to grow at a CAGR of 7.69% during the forecast period 2016-2022. The factors which drive the growth of the market are the rising prevalence of chronic diseases, rising acceptance of vitamin C intravenous treatment therapy to treat colorectal cancer. This is attributed to the factors such as Growing acceptance of vitamin C intravenous for Colorectal Cancer and increasing prevalence of the chronic diseases. Europe is the second largest market which is growing at a CAGR of 8.12% from 2016-2022. Asia-Pacific region is the fastest growing market for IV Solutions, which is expected to grow at a CAGR of 8.34% during the forecast period from 2016 to 2022. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: IV Fluids (500 ml Pack): 22,400 Packs / Day IV Fluids (250 ml Pack): 22,400 Packs / DayPlant & machinery: Rs 2505 lakhs
Working capital: -T.C.I: Cost of Project: Rs 4334 lakhs
Return: 27.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Mining of Mineral Ore with Processing and Beneficiation for Production of Red Iron Oxide

Iron & steel is the driving force behind industrial development in any country. The vitality of the Iron & Steel Industry largely influences a country's economic status. The mining of iron ore, an essential raw material for Iron & Steel Industry, is arguably of prime importance among all mining activities undertaken by any country. With the total resources of over 33.276 billion tonnes of haematite (Fe2O3) and magnetite (Fe3O4), India is amongst the leading producers of iron ore in the world. The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make steel. Steel is used to make automobiles, locomotives, and ships, beams used in buildings, furniture, paper clips, and tools, reinforcing rods for concrete, bicycles, and thousands of other items. It is the most-used metal by both tonnage and purpose. Steel is a processed form of pig iron with impurities such as silicon, phosphorus and sulfur removed and with a reduction in the carbon content. Globally, steel's versatility is unsurpassed. Wrought iron (low carbon) and cast iron (pig iron) also have important markets. One of the most ubiquitous products in Australia is corrugated iron, a structural sheet steel shaped into parallel furrows and ridges. Global iron ore production will modestly grow to 3,119 million tonne by 2028 from 2,850 million in 2019, Fitch Solutions Macro Research said in a report today. This represents an average annual growth of 0.5 per cent during 2019-2028, which is a significant slowdown from an average growth of 2.9 per cent during 2009-2018, it said. The supply growth would be primarily driven by India and Brazil where major miner Vale is set to expand output with its new mine. On the other hand, miners in China, which operate at the higher end of the iron ore cost curve will be forced to cut output due to fall in ore grades. India’s finished steel consumption grew at a CAGR of 5.69 per cent during FY08-FY18 to reach 90.68 MT. India’s crude steel and finished steel production increased to 106.56 MT and 131.57 MT in 2018-19, respectively. In FY20 (till November 2019), crude steel and finished steel production stood at 73.17 MT and 67.52 MT respectively. During 2018-19, 6.36 MT of steel was exported from India. Exports and imports of finished steel stood at 5.75 MT and 5.07 MT, respectively, in FY20P (up to November 2019). As a whole any entrepreneur can venture in this project without risk and earn profit. Government Initiatives Some of the other recent government initiatives in this sector are as follows: • Government introduced Steel Scrap Recycling Policy aimed to reduce • import. • An export duty of 30 per cent has been levied on iron ore^ (lumps and fines) to ensure supply to domestic steel industry. • Government of India’s focus on infrastructure and restarting road projects is aiding the boost in demand for steel. Also, further likely acceleration in rural economy and infrastructure is expected to lead to growth in demand for steel. • The Union Cabinet, Government of India has approved the National Steel Policy (NSP) 2017, as it seeks to create a globally competitive steel industry in India. NSP 2017 envisages 300 million tonnes (MT) steel-making capacity and 160 kgs per capita steel consumption by 2030-31. • The Ministry of Steel is facilitating setting up of an industry driven Steel Research and Technology Mission of India (SRTMI) in association with the public and private sector steel companies to spearhead research and development activities in the iron and steel industry at an initial corpus of Rs 200 crore (US$ 30 million). • The Government of India raised import duty on most steel items twice, each time by 2.5 per cent and imposed measures including anti-dumping and safeguard duties on iron and steel items. Huge scope for growth is offered by India’s comparatively low per capita steel consumption and the expected rise in consumption due to increased infrastructure construction and the thriving automobile and railways sectors. Few Indian major players are as under Mineral Enterprises Ltd. Mandovi Pellets Ltd Idcol Kalinga Iron Works Ltd. Essel Mining & Inds. Ltd. Brahmani River Pellet Ltd. Bonai Industrial Co. Ltd. Arya Iron & Steel Co. Pvt. Ltd Odisha Mining Corpn. Ltd. Obulapuram Mining Co. Pvt. Ltd.
Plant capacity: Iron Ore: 2,400 MT / DayPlant & machinery: Rs 527 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1798 lakhs
Return: 30.00%Break even: 61.00%
Add to Inquiry Add to Inquiry Basket

Spices (Turmeric, Chilli & Masala Powder)

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, bulb) of plants used as a flavoring or seasoning, although many can also be used as a herbal medicine. A closely related term, ‘herb’, is used to distinguish plant parts finding the same uses but derived from leafy or soft flowering parts. The two terms may be used for the same plants in which the fresh leaves are used as herbs, while other dried parts are used as spices, e.g. coriander, dill. There are a large number of various spices, used along with food such as pepper, chill, cardamom, cinnamon, mustard, cloves, ginger, turmeric, coriander etc. These spices give taste to the prepared food and at the same time give attractive colours and smell to the food. So the usage of some or all of these spices during cooking is now became an unavoidable one. The quantity of a particular spice added to the food during cooking is depends upon the taste of the user. For better and proper taste, the addition of these spices should be controlled. For that there is certain composition of spices for each type of dishes. For e.g if we are going to make the north Indian dish paneer butter masala. There is a particular composition of the spices and at the same time the composition of the spices added to sambar a south Indian dish is entirely different, even though the contents are same. India is the largest producer, consumer and exporter of spices and spice products in the world and produces more than 50 spices. India is also a big exporter of Chilli, turmeric, cumin, pepper and many other spices. The country also imports various spices to meet its local requirement of taste as Indian dishes are incomplete without adding varieties of spices to them. Andhra Pradesh is the largest spice producing state in India. Gujarat, Karnataka, Rajasthan, Tamilnadu, Assam, Kerala, Madhya Pradesh, Maharashtra, Orissa, Uttar Pradesh and West Bengal are the other major spices producing states in India. Chilli is the major spice crop occupying about 29 percent of area under cultivation and contributing about 34 percent of total spices production in the country. Turmeric accounts for 14% of production and 6% of area, while garlic accounts for 19% of production and 5% of area. Seed spices contribute 17% of production and occupy 41% of area while pepper contributes 2% of production and occupies 9% of area of the total spices in the country. Total spices export from India stood at 226,225 tonnes valued at US$ 621.78 in April-June 2016, registering a year-on-year growth of 3 per cent. Major importers of Indian spices in FY 2015-16 were US, China, Vietnam, UAE, Indonesia, Malaysia, UK, Sri Lanka, Saudi Arabia, and Germany. Worldwide, food trends are changing with a marked health orientation. Since organic foods are free from chemical contaminants, the demand for these products should steadily increase in the new millennium. Organic cultivation is nothing new to India. Government of India has announced a few schemes under which 100 per cent export-oriented units can be set up any, where in India. The subject of the scheme is to promote to export of manufacture goods. Under this scheme special concession and facilities are provided to entrepreneurs desirous of setting up 100 percent export units. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under Indian Products Pvt. Ltd. Indian Chillies Trdg. Co. Ltd. Gokul Agro Inds. Ltd. General Commodities Pvt. Ltd. Empire Spices & Foods Ltd. Eastern Condiments Pvt. Ltd. Cookme B B D Pvt. Ltd. Bhavani Tea & Produce Co. Ltd. Paras Spices Pvt. Ltd. Periyar Plantations Pvt. Ltd. Shubham Goldiee Masale Pvt. Ltd.
Plant capacity: Turmeric Powder: 2,000 Kgs. / Day Red Chilli Powder: 2,000 Kgs. / Day Sambhar Masala: 2,000 Kgs. / Day Biryani Masala: 2,000 Kgs. / Day Chicken Fry Masala: 2,000 Kgs. / Day Garam Masala : 2,000 Kgs. / DayPlant & machinery: Rs 138 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1138 lakhs
Return: 32.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Dental Materials Alginate, GI Cement, Composite Resin & Polycarboxylate Cement

A dental impression is a negative imprint of hard (teeth) and soft tissues in the mouth from which a positive reproduction (cast or model) can be formed. It is made by placing an appropriate material in a stock or custom dental impression tray which is designed to roughly fit over the dental arches. Impression material is of liquid or semi-solid nature when first mixed and placed in the mouth. It then sets to become an elastic solid (usually takes a few minutes depending upon the material), leaving an imprint of person's dentition and surrounding structures of oral cavity. Dental equipment is tools used to diagnose and treat dental diseases. Dental tools are used by dental professionals to examine, manipulate, restore and remove teeth and surrounding oral structures and to provide dental treatment. The end-users for this market include hospitals, dental clinics, and dental practitioners. Patient demand for better dental care facilities has increased due to increasing dental awareness and growing disposable income of the people around the world. Furthermore, factors like rising geriatric population, changing lifestyles, increasing incidences of dental caries and other periodontal diseases, rising demand for cosmetic dentistry, and increased public and private health care expenditure are persistently driving the dental care market. Asia-Pacific is expected to show lucrative growth over the forecast period owing to increased demand as a consequence of large population base with high unmet medical needs. Adoption of innovative instruments and techniques is expected to further propel the growth of this region. Furthermore, improving healthcare infrastructure as a result of government initiatives is expected to fuel growth of Asia Pacific region. On the basis of products, the market is divided into radiology equipment, lasers, systems & parts, laboratory machines, hygiene maintenance device, and other equipment. Systems & parts held the largest share in the product segment and accounted for USD 2,206.2 million in the overall market in 2013. Wide applications of systems & parts conducting any procedures attributed to the dominance of systems & parts segment. Dental lasers are expected to grow at a CAGR of over 8.2% from 2013 to 2020. Growth in demand for cosmetic dentistry and minimally invasive procedures is expected to boost the growth in this segment over the forecast period. As per the 2012 statistics of the World Health Organization (WHO), around 60–90% of school-going children and around 100% of adults suffer from dental problems. As a result, the WHO has undertaken various strategies to increase the awareness about oral disease prevention and promotion. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: Alginate (500 gms Packs): 80 Packs / Day Glass Ionomer Cement (15 gms Packs with 10 gm Liquid): 1,333.3 Packs / Day Composite Resin Poly Carboxylate Cement (500 gms Pack): 40 Packs / DayPlant & machinery: Rs 56 lakhs
Working capital: -T.C.I: Cost of Project: Rs 212 lakhs
Return: 31.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

PET Polyester Acoustic Panel

Acoustic panels are sound absorbing panels placed on walls or ceilings to control and reduce noise, eliminate slap echo and control comb filtering in a room. The objective is to enhance the properties of sound by improving sound quality with sound absorbing panels. Often used to treat recording studio acoustics, church acoustics, home theater acoustics, restaurant acoustics, and listening rooms, the purpose of acoustic panels is to reduce, but not entirely eliminate, resonance within the room. Acoustic panels differ from Bass Traps in that they deal more with the mid and high frequencies in a room. Sound absorption is different than soundproofing, which is typically used to keep sound from escaping a room. Acoustic panels control echo and reverberation in a room. Most commonly used to resolve speech intelligibility issues in commercial soundproofing treatments. Most panels are constructed with a wooden frame, filled with sound absorption material (mineral wool, fiberglass, cellulose, open cell foam, or combination of and wrapped with fabric. Acoustic Panels are also referred to as Sound Absorption Panels, Soundproof Panels, or Sound Panels. Polyester Acoustic Panels are sound absorbing panels developed with environmental friendliness in mind. The panels are made from 100% polyester, 60% recycled fiber, and are 100% recyclable. Panels offer many environmental advantages and are a good alternative to a traditional fabric wrapped fiberglass panel. The core material is durable enough to withstand the force. The resistant polyester is an excellent choice for use high traffic areas in athletic facilities, offices, schools, multipurpose rooms and just about anywhere. The Polyester Acoustic Panels are delivered as a finished, durable sheet, ready to install. They may be easily cut to size on site for a custom fit or to create designs. Growing demand for sound absorption materials in the entertainment industry including music studios, corporate workplaces, cinema halls, and auditoriums will provide a positive scope for acoustic insulation market penetration during the forecasted timeframe. Increasing focus for improving the building infrastructure to offer peaceful and convenient environment in public places has led to a rise in installation of sound barriers across the highways, construction sites, airport runways, railway stations etc. Further, constructive indicators from the workout centres, gyms, industrial sound absorption, control rooms, cabinets, and shipbuilding segments hold potential opportunities for the product growth globally. Global acoustic insulation market is driven by rapid innovations & technological development in the construction, industrial and transportation sector. Shifting consumer preferences toward construction of green buildings coupled with surging preferences toward usage of environment-friendly sound absorption products will stimulate the market over the forecast timeframe. Developing economies such as China, India, Mexico, and Brazil will substantially impact the product development owing to large customer base coupled with inclining preferences towards noise-free buildings and quiet environment requirements in hospitals and educational institutions. Asia-Pacific and Middle East & African countries are experiencing huge domestic as well as foreign investments for setting up industrial units, hospitals, malls, multiplexes, hospitality industry, and IT sector. Asia-Pacific is an attractive market for foreign companies, due to healthy economic performance of the countries, like India, China, Indonesia, etc., and efforts made by the Middle Eastern countries to develop its tourism and other non-oil sectors, which are driving commercial construction activities in these regions. The Indian Government has also set an investment target of USD 120.5 billion for developing 27 industrial clusters; this is expected to boost commercial construction in the country. Asia Pacific will witness the fastest growth with a CAGR at 5% in the acoustic insulation market by 2025. Rising disposable income coupled with extensive product utilization in the building & construction, industrial, and transportation segments in the region are key factors driving industry growth. Surging government investments in numerous industrial & commercial projects pertaining to fire and sound absorption will stimulate the market share. Rapid surge in infrastructural activities along with the growing noise pollution in several metropolitan cities will proliferate the acoustic insulation market demand in the region. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under Saint-Gobain India Pvt. Ltd. Owens Corning Inds. (India) Pvt. Ltd. Kingspan Jindal Pvt. Ltd. B A S F Polyurethanes India Ltd.
Plant capacity: PET Polyester Acoustic Panel (Size 4' x8'x1"): 666.7 Pcs / DayPlant & machinery: Rs 286 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1048 lakhs
Return: 26.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Adult Diapers and Baby Diapers

A diaper or nappy is a kind of underwear that allows one to defecate or urinate in a discreet manner. When diapers become soiled, they require changing; this process is often performed by a second person such as a parent or caregiver. Diapers are primarily worn by children who are not yet potty trained or experience bedwetting. However, they can also be used by adults with incontinence or in certain circumstances where access to a toilet is unavailable. These can include the elderly, those with a physical or mental disability, and people working in extreme conditions such as astronauts. It is not uncommon for people to wear diapers under dry suits. The Baby Diaper Industry has revolutionized the FMCG industry. The diapers have the ability to contain the urine by converting it into gel. Thus, due to this property, the diapers are gaining huge consumption amongst the baby as well as adult population. Further, it is anticipated that the Baby Diaper market is expected to reach around INR 200 Billion by 2022, growing at a double digit CAGR over the forecasted period 2017-2022. Disposable diapers market would garner substantial market share of about 63% of the estimated global market by 2020. The changing environmental needs would limit the use of disposable diaper in the future, promoting the usage of bio-degradable diapers. The companies operating in this market are focusing on manufacturing cost effective and skin friendly diapers that will cater to the customers with pressing demands for quality and cost effectiveness. The current population growth rate shows that there is a demand for diapers and nappies in households, particularly considering the increase in the workforce prompting mothers to stock diapers, especially disposables, as they are easier and faster to handle. The various types of baby diapers available in the markets include cloth diapers, swim pants, training nappies, and a wide category of disposable diapers such as biodegradable, super-absorbent, and ultra-absorbent diapers. In India, the segment of disposable diapers accounts for more than 75% of the market share. The diaper industry in India has grown with a CAGR of more than 20% over the last five years from 2011-12 to 2016-17. The diaper market largely consists of baby diapers in India with more than 95% volume share whereas adult diapers have just started their foray into the mainstream market. Further, it is anticipated that the Diaper market is expected to reach around INR 200 Billion by 2022, growing at a double digit CAGR over the forecasted period 2017–2022. The adult diapers market in India started at a low development level, it has grown rapidly. The continuous construction of international hospital chains helped many diaper manufacturers to promote their brands across India. Today, 70% of adult diapers are sold through hospitals and their affiliated stores, which are welcomed by Indians. The majority of adult diapers are diapers, pads, and nursing pads. Indian senior centers a Real so starting to promote adult diapers. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under Mediklin Healthcare Ltd. Me N Moms Pvt. Ltd. Kimberly-Clark India Pvt. Ltd. Diapers India Ltd. Auctus Pharma Ltd Amkay Products Pvt. Ltd. Nobel Hygiene Pvt. Ltd. Pigeon India Pvt. Ltd.
Plant capacity: Baby Diapers (4 Pcs.): 18,000 Pkts. / Day Adult Diapers (4 Pcs.): 18,000 Pkts. / DayPlant & machinery: Rs 1632 lakhs
Working capital: -T.C.I: Cost of Project: Rs 2219 lakhs
Return: 27.00%Break even: 48.00%
Add to Inquiry Add to Inquiry Basket

Hot Melt Glue Stick

Thermoplastic adhesives, also known as "hot melt" adhesives, applied hot and simply allowed to harden. These adhesives have become popular for crafts because of their ease of use and the wide range of common materials to which they can adhere. Hot melt adhesive is special kind of adhesives, which can be used at high temperature and adhesion properties remain unchanged on cooling. Hot melt adhesives basically formed by compounding of synthetic polymeric resin. Synthetic polymeric resins are used polyvinyl acetate, Polyethylene acetate, Urea formaldehyde etc. It is generally in the form of solid white powder or in the liquid form. For the manufacturing of hot melt adhesives, there is required of a jacketed metallic reaction kettle, heating system and packaging machine. Hot melt glue sticks consist of a high performance, hot melt adhesive supplied in sticks 300 mm long and approximately 11.5 mm in diameter. They are designed for application by appropriate glue guns and provide bonds with good flexibility and peel strengths, being particularly suitable for use with flexible substrates. The Adhesive Technologies business unit is a leading solution provider for adhesives, sealants and functional coatings for consumers, craftsmen and industrial applications. Henkel offers a multitude of applications to satisfy the needs of different target groups: consumers, craftsmen and industrial businesses. In 2019, the business unit generated sales of 9,461 million euros, 47 percent of total company sales. Hot Melt Adhesives Market size exceeded USD 6.60 billion, globally in 2018 and is estimated to grow at over 6.4% CAGR between 2019 and 2026. Automobile application segment held the highest share in 2018, and is expected to maintain its dominance throughout the forecast period. Hot melt adhesives are formulations based on thermoplastic polymers which can be softened and reshaped on heating above their melting point. These adhesives are applied on a material in liquid state and offer easy to clean application with minimum toxicity. They are served in a wide array of industries such as packaging owing to their high stability & strength, making them a suitable alternative to solvent-borne adhesives. Hot melt adhesives demand is attributed towards rising importance regarding disposable hygiene products and growing government initiatives to promote health & wellness among individuals. With increasing awareness for personal hygiene, consumers are looking for products with enhanced features such as better absorption and improved softness which has augmented the adoption of environment friendly disposable adhesives. The hot melt adhesives market offers an effective solution for carton closing, sealing and play a significant role in overcoming challenges such as energy efficiency and product safety. This has further enhanced its usage in food, beverage & other consumer goods packaging applications. As a whole any entrepreneur can venture in this project without risk and earn profit.
Plant capacity: Clear Transparant Glue Stick Size 200 mmx 7 mm (LxD):2,000 Kgs / Day Yellow Glue Stick Size 250 mmx 11 mm (LxD): 2,000 Kgs / Day Milky Glue Stick Size 100 mmx 7 mm (LxD): 2,000 Kgs / DayPlant & machinery: Rs 73 lakhs
Working capital: -T.C.I: Cost of Project: Rs 687 lakhs
Return: 27.00%Break even: 49.00%
Add to Inquiry Add to Inquiry Basket

Beer & Wine

Beer is the world's oldest beverage, possibly dating back to the 6th millennium BC. It is also the most widely consumed alcoholic beverage and the third most popular drink overall after water and tea. Produced by the brewing and fermentation of starches, mainly derived from cereals — the most common of which being barley. Beer forms part of the culture of many nations, and has acquired various social traditions and associations. Beer is consumed in countries all over the world. Sales of beer are four times that of wine and in most societies, beer is the most popular alcoholic beverage. Today, the brewing industry is a global business, consisting of several dominant multinational companies and many thousands of smaller producers ranging from brewpubs to regional breweries. Among the alcoholic drinks, Beer is quite common and popular in almost every Country of the World. People of different Countries take beer in varying much like a soft drink in European Countries it is just a substitute of water. The alcoholic contents and main source stuff also keep varying according to the tests of the major part of population of the particular country although it is a fashion to ask for beer of every origin in every Country. Wine is fermented grape juice. Wine can be made from grapes, fruits, berries etc. Most wine, though, is made from grapes. And no matter what the wine is made from, there must be fermentation, that is, that sugar be transformed into alcohol. If the amount of alcohol is relatively low, the result is wine. If it is high, the result is "distilled liquor," like gin or vodka. Red wine result when the crushed grape skin pulp and seeds of purple or red varieties are allowed to remain with juice during fermentation periods. Pink/rose wine can be produced by removing the non-juice pumace from the must during fermentation. The Global Beer Market was valued at $593,024 million in 2017, and is projected to reach $685,354 million by 2025, growing at a CAGR of 1.8% from 2019 to 2025. The origin of beer dates to the early Neolithic period, and is one of the oldest and the most consumed alcoholic beverages in the world. The annual growth in the Indian beer market has been around 8% in the recent years, which compares well with the growth in China. But the Chinese market of 20 mn kl is over 25 times more than the Indian market of over 900,000 kilolitres. The Beer market in India will grow at a CAGR of 16.94 percent and 14.57 percent on the basis of revenue and volume. The growing popularity of wine in India is generating lots of interest among big and small wine producers. This is also reinforced by the fact that the cost for opening and setting up of wine plants with capacity of around 100,000 lts comes only to somewhere between Rs. 10-15 mn mark. As a result many entrepreneurs, Indian and foreign, are entering in this sector. The market for super-premium vodka category in India, priced upwards of Rs. 2,500 per qt, is estimated at about 7,000 cases annually, and is growing at about 30%. Wine makes up only a fraction of the overall alcoholic drinks market, but is growing nearly three times as fast as whisky or rum, the traditional favourites. India's top three wine makers have more than two-thirds of the market of more than 5 mn bottles, valued at Rs. 2.4 bn or USD 60 mn. The segment is seeing bigger demand even for pricey sparkling wine. One estimate has put India's total wine market at around 0.9 mn cases. Of this, imported wine constitutes 1,50,000 cases. In a global perspective, this is really miniscule. The wine market in the US is estimated at 250 mn cases and in France around 320 mn cases. On this account itself, this obviously translates into a huge opportunity. Indian red wines, it's more of increasing popularity of white, sparkling, rose and other wines into the Indian market. The Indian consumers have stared exploring other variants of wines from just red wines. The consumption of Wine in India is found to be increasing with rise of awareness of wine as a good drink for health. The wine market of India observed growth with a CAGR of more than 25% in past five years. The global wine market was valued at US$ 296.03 billion in 2016 and is slated to reach US$ 404.64 billion by 2025. The market is expected to exhibit a CAGR of 3.23% during the forecast period (2017-2025). Asia Pacific is projected to witness the fastest growth in the wine market with countries such as China, India being the key contributors in the region. At a global level, China stands to be the largest market for alcohol consumption with the country also being one of the leading importers of wine worldwide. The ongoing recovery of the Chinese economy, growing upper middle class population and the rising disposable income is further expected to boost the consumption of wine in the country. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under United Breweries Ltd. Som Distilleries & Breweries Ltd. Premier Breweries Ltd Parag Breweries Ltd. Mount Everest Breweries Ltd. Lilasons Breweries Ltd. Kalyani Breweries Ltd. Hindustan Breweries & Bottling Ltd. Him Neel Breweries Ltd
Plant capacity: Beer (650 ml size Bottle): 30,077 Bottles / Day Wine (750 ml size Bottle): 445 Bottles / DayPlant & machinery: Rs 2086 lakhs
Working capital: -T.C.I: Cost of Project : Rs 3913 lakhs
Return: 30.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Dairy Farming & Dairy Products (Milk, Butter, Ghee & Paneer)

Dairy farming has been part of agriculture for thousands of years, but historically, it was usually done on a small scale on mixed farms. Specialist scale dairy farming is only viable where either a large amount of milk is required for production of more durable dairy products such as cheese, or there is a substantial market of people with cash to buy milk, but no cows of their own. Centralized dairy farming as we understand it primarily developed around villages and cities, where residents were unable to have cows of their own due to lack of grazing land. Near the town, farmers could make some extra money on the side by having additional animals and selling the milk in town. Dairy farming is a class of agriculture for long-term production of milk, which is processed for eventual sale of a dairy product. Dairying is an important source of subsidiary income to small/marginal farmers and agricultural laborers. India derives nearly 33% of the gross Domestic population from agriculture and has 66% of economically active population, engaged in agriculture. The share of livestock product is estimated at 21% of total agriculture sector. Milk production alone involves more than 70 million producers, each raising one or two cows/buffaloes primarily for milk production. In addition to milk, the manure from animals provides a good source of organic matter for improving soil fertility and crop yields. The gobar gas from the dung is used as fuel for domestic purposes as also for running engines for drawing water from well.In Hinduism; cow urine has a special significance as a drink. Sprinkling of cow urine is said to have a spiritual cleansing effect as well. Gomutra is not a toxic waste material. 95% of it is water, 2.5% consists of urea, and the remaining 2.5% is a mixture of minerals, salts, hormones and enzymes. As of 2018, India is the leading milk producing country in the world, accounting for ~19% of the global market share. The milk processing industry in India is expected to expand at a compound annual growth rate (CAGR) of ~14.8% between FY 2018 and FY 2023, and will reach INR 2,458.7 Bn in FY 2023. Being one of the primary dairy consumables in India, the increase demand for milk in the country is owed to the increasing population. As of FY 2018, ~81.1% of the Indian dairy and milk processing market was part of the unorganized sector, which produces milk in unhygienic environments. This reduces the overall quality and nutrition levels of the milk produced. India has the highest livestock population in the world with 50% of the buffaloes and 20% of the world’s cattle population, most of which are milch cows and milch buffaloes. India’s dairy industry is considered as one of the most successful development programs in the post-Independence period. India is the world’s largest milk producer, accounting for more than 13% of world’s total milk production. As it is the world’s largest consumer of dairy products, but consuming almost 100% of its own milk production. Dairy products are a major source of cheap and nutritious food to millions of people in India and the only acceptable source of animal protein for large vegetarian segment of Indian population, particularly among the landless, small and marginal farmers and women. In India, about three-fourth of the population live in rural areas and about 38% of them are poor. A specific Indian phenomenon is the unorganized sector of milkmen, vendors who collect the milk from local producers and sell the milk in both, urban and rural areas, which handles around 65-70% of the national milk production. However, it opens a new gate for the dairy farmer to directly reach to the consumer or to shorten the distance between the consumer and producer, leading to higher rates for the product milk. While, in the organized dairy industry, the cooperative milk processors have a 60% market share. The cooperative dairies process 90% of the collected milk as liquid milk whereas the private dairies process and sell only 20% of the milk collected as liquid milk and 80% for other dairy products with a focus on value-added products. In the present situation of world market, the milk and dairy market landscape is a dynamic entity within the food industry new opportunities in emerging markets, increasing globalization, changes in consumer demand, nutritional policy and the regulatory environment are among top issues facing the industry. This will lead to increase of India`s share in the world milk production from the current 16 per cent to 21 per cent in 2020. The core of the dairy industry lies with the milk producing farmer, who gets affected by many factors ranging from fuel and agricultural input prices to government`s foreign policy. The global dairy products market is expected to grow at a CAGR of 5.2% from 2019 to reach $645.8 billion by 2025. Dairy is defined as a business enterprise that deals with the processing and harvesting of animal milk for human consumption. Some of the common milch animals include cow, goat, buffalo, camel and sheep. The milk obtained from these animals can be consumed directly and processed into ice cream, cheese, paneer, butter, ghee, condensed milk and yogurt. These products offer various nutrients such as calcium, proteins, zinc, magnesium, and vitamin D and B12. With widespread demand for dairy products and their proactive function in the global food industry, dairy plays a crucial role in the growth of the economies worldwide. Over the years, the dairy industry has witnessed improvements in product safety through specialization, modernization and consolidation. Moreover, advancements in global trade have also influenced the profitability of dairy farms. As a whole any entrepreneur can venture in this project without risk and earn profit. Few Indian major players are as under Amrut Industries Ltd. Creamline Dairy Products Ltd. India Dairy Products Ltd K M G Milk Food Ltd Milk Mantra Dairy Pvt. Ltd. Sri Vyshnavi Dairy Pvt. Ltd. Taj Milk Foods Pvt. Ltd. Tirumala Milk Products Pvt. Ltd. Vaishno Devi Dairy Products Ltd.
Plant capacity: Milk: 5,000 Ltrs / Day Butter: 120 Kgs / Day Ghee: 100 Kgs / Day Paneer: 220 Kgs / Day Cow Urine: 6,500 Ltrs / Day Kande: 2,900 Pkts / DayPlant & machinery: Rs 276 lakhs
Working capital: -T.C.I: Cost of Project: Rs 1768 lakhs
Return: 27.00%Break even: 42.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 249 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 249 336 337   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top