Google Search

Search

Already a Member ?

Best Business Opportunities in Jharkhand- Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship Projects

Mining & Minerals: Project Opportunities in Jharkhand

PROFILE:

Minerals are valuable natural resources being finite and non-renewable. They constitute the vital raw materials for many basic industries and are a major resource for development. Management of mineral resources has, therefore, to be closely integrated with the overall strategy of development; and exploitation of minerals is to be guided by long-term national goals and perspectives. Ministry of Mines is responsible for survey and exploration of all minerals, other than natural gases, petroleum and atomic minerals, for mining and metallurgy of non-ferrous metals like aluminium, copper, zinc, lead, gold, nickel, etc. and for administration of the Mines and Minerals (Regulation and Development) Act, 1957 in respect of all mines and minerals other than coal, natural gas and petroleum.

The newly carved out resource rich State of Jharkhand is widely acclaimed as the region of the future, having immense potential for industrialisation with its large deposits of minerals which could provide a firm launching pad for various industries.

RESOURCES:

Jharkhand is one of the richest zones of minerals in the world. The 40% of the total minerals of the country are available in this state. The State is the sole producer of cooking coal, uranium and pyrite. It ranks first in the production of coal, mica, kyanite and copper in India. The geographical exploration and exploitation of gold, silver, base metals, decorative stones, precious stones, etc. are the potential areas of the future. Jharkhand is also endowed with other resources such as surface and ground water, land with immense bio-diversity, moderate climate, disciplined and skilled manpower, adequate availability of power, which are the basic essentials for the growth and development of industries.

GOVERNMENT POLICIES:

Jharkhand region is generously endowed with Mineral Wealth and the State Government is committed to create an environment conducive to the growth of Mining and Mineral based Industries in the State. In view of this, the State's Industrial policy covers certain clauses relevant for Mining and Mineral sector, which are enumerated below:

•        Simplify procedures and expedite granting of mining leases.

•        Provide certain relief to make mining activities easier.

•        Encourage use of modern exploration techniques to set up a resource inventory of various minerals in the State.

•        Encourage joint venture projects with SMDC.

•        Clear mining lease applications and project report within 60 days.

•        Encourage foreign investment and technological collaboration by OCBs and NRIs in selected sectors including Mineral development.

•        Encourage Private Sector participation in Mining Activities

Jharkhand State Mineral Development Corporation Ltd. was incorporated on 7th May, 2002 after bifurcation from Bihar State Mineral Development Corporation Ltd. JSMDC is a Government of Jharkhand Undertaking under the Dept. of Mines & Geology, Govt. of Jharkhand. It is premier producer and supplier of minerals and mineral based products in the State of Jharkhand. Core business of the Company is production and marketing of coal, limestone and its powder, kyanite, graphite, granite blocks and manufacturing of granite tiles of smaller dimensions. JSMDC is a consistently making profit company. Annual turnover is more than 100 Crores in the current fiscal year.

 

 

 

Agro-Based Industries: Project Opportunities in Jharkhand

 

 

PROFILE:

 

Agro-based industry would mean any activity involved in cultivation, under controlled conditions of agricultural and horticultural crops, including floriculture and cultivation of vegetables and post-harvest operation on all fruits and vegetables. The development of agro-industries has assumed crucial importance in the economic planning and progress of the country. The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad-based development of the agro-products industry will improve both the social and physical infrastructure of India. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The state of Jharkhand having diversified agro-climatic conditions is much suited for the development horticulture based economy that has ample scope for its growth.

RESOURCES:

The agro-climatic conditions of the State are conducive for commercial cultivation of large varieties of fruits, vegetables,flowers and medicinal and aromatic plants. Plantation and Horticulture is one of the important sub sectors of Agriculture having ample scope for expansion in the state of Jharkhand. The state of Jharkhand has a total geographical area of 79.7 lakh ha out of which cultivable land is 38 lakh ha. The net irrigated area is only 1.57 lakh ha which is only 8% of the net sown area. The total area occupied for plantation and horticulture crop in the state is about 2.57 lakh hectares. Different kinds of fruits are grown in Jharkhand. The crops grown in Jharkhand are Mango, Litchi, Stone fruit (Peach), Citrus (Lime/Lemon), Awla and Papaya in fruits, Chilli, Turmeric and Ginger in spices, Rose, Marigold, Gerbera, Carnation and Gladiolus among flowers, Lemon grass, Palmarosa and Rosa damascena in aromatic plants, Cashew in Plantation crops. Jharkhand endowed with vast impounded fresh water resources in the form of tank/ponds and reservoirs. The major plantation crops cultivated in the State are cashew nut and coconut. The Board has identified the State as high potential State for coconut cultivation as the average productivity of coconut palm is 36 nuts per palm, which is above the national average of 34 nuts. Cashew nuts popularly known as a gold mine of wastelands is very ideal for cultivation in wastelands and hence there is good potential for cashew cultivation especially in East and West Singhbhum districts. Tea plantation in a small measure has been taken up in Ranchi district, which has a favourable climate for growing tea.

 

 

 

GOVERNMENT POLICIES:

 

 The promotion of Agro-based industries is among the priorities of the State Government. The state has assured supply of fruits & vegetables grown by applying scientific techniques, investment in post harvest and good transport infrastructure. The National Horticulture Mission (NHM) in the Jharkhand State was launched in late 2005-06 initially in 10 districts with main focus on production of planting materials, vegetable seed production, establishment of new gardens, creation of water resources etc. Establishment of new gardens include perennial and non perennial fruits, spices, floriculture, aromatic and medicinal plants. This scheme was 100 % sponsored by Central Govt. during 2005-06 and 2006-07 (Xth Five Year Plan). However, during 2007-08 and onwards (XIth Five Year Plan) this scheme has been implemented in 15 districts with the pattern of assistance as 85:15 by Central Govt. and State Govt. respectively. The Jharkhand government has decided to set up a food park to kick off the development of the food processing sector in the state and attract investors. In general very few small scale food processing industries are present in the state.

 

 

 

 Sericulture (Tasar Silk): Project Opportunities in Jharkhand

 

PROFILE:

Sericulture is an agro-based industry. It involves rearing of silkworms for the production of raw silk, which is the yarn obtained out of cocoons spun by certain species of insects. The major activities of sericulture comprises of food-plant cultivation to feed the silkworms which spin silk cocoons and reeling the cocoons for unwinding the silk filament for value added benefits such as processing and weaving. Silk is a fine strand of fiber that is a solidified secretion produced by certain caterpillars to encase themselves in the form of cocoons. India is second largest producer of silk. Sericulture industry is looking out for the developments of young age silk worm rearing or chawki rearing. Care of silk worms start from the stage of procurement of silk worm eggs from the grainage itself. Silk worm eggs are distributed to the farmers for commercial rearing when active development of embryo is in progress. The important aspect of young silkworm rearing management are a suitable separate rearing house or room, well maintained mulberry garden with assured irrigation facilities. Sericulture has emerged as a virtual lifeline and a profitable employment avenue for villagers in Maoist-affected areas in India's eastern Jharkhand. Under the aegis of the Jharkhand state industrial department, farmers are beginning to rear silkworms.

RESOURCES:

Jharkhand, much like Chattisgarh and Uttaranchal, is endowed with adequate forest cover. These forests are home to two species of trees -Arjuna (Terminalia Arjuna) & Asan (Terminalia Tomentosa) which are breeding ground for the moth which produces the cocoon from which Tasar yarn is reeled. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Tussar Food plants are available over an area of 9 lakh hectares. The Singhbhum and Santhalpargana regions are the main silk producing centres in the State. The State is promoting this activity through 28 pilot project centres situated in different areas. Each rearer can rear on an average 200 eggs or Disease Free Laying (DFLs) so the annual demand of commercial seed or egg is of 130 lakh. There are three types of seeds or eggs – Nucleus, Basic seed and Basic seed multiplied to commercial seed.

GOVERNMENT RESOURCES:

Tasar culture is a backbone for Tribal development, and the Government of India, through the Central Silk Board and different State Governments have initiated several developmental and welfare measures for the tribal welfare through it. Jharkhand's forest department is also planning to encourage planting of Arjuna trees in place of the traditional Acacia or Eucalyptus trees. Jharkhand Sericulture Development Institute (JSDI) and Jharkhand Silk Technical Development Institute (JSTDI) are being strengthened to give an impetus to this sector. During the year 2010-11, it is proposed to rear 2.35 lakh tasar nucleus DFLs, 16 lakh of tasar basic DFLs and 96 lakh of commercial DFLs through seed and commercial rearers in the State. It is proposed to be benefited 40,000 -50,000 Tasar farmers through Tasar seed production and its rearing during the year.

 

Steel Industry

 

PROFILE:

Steel Industry is a booming industry in the whole world. India’s economic growth is contingent upon the growth of the Indian steel industry. Consumption of steel is taken to be an indicator of economic development. While steel continues to have a stronghold in traditional sectors such as construction, housing and ground transportation, special steels are increasingly used in engineering industries such as power generation, petrochemicals and fertilisers. Indian Steel Industry is more than a century old. India has now emerged as the eighth largest producer of steel in the world with a production capacity of 35MT. Almost all varieties of steel is now produced in India. India has also emerged as a net exporter of steel which shows that Indian steel is being increasingly accepted in the global market. The growth of the steel industry in India is also dependant, to a large extent, on the level of consumption of steel in the domestic market. Steel consumption is significant in housing and infrastructure. In recent years the surge in housing industry of India has led to increase in the domestic demand for steel.

 

 

RESOURCES:

Jharkhand emerges as hub for steel companies. The state is endowed with deposits of Iron Ores of both, Hematite & Magnetite. The Hematite deposits are mainly located in the West Singhbhum District and have a resource base exceeding 3700 Million Tonnes. These have been explored only in pockets by large industry houses in their lease hold. There is a very good scope of enlarging this resource base by further exploration. The Magnetite Deposits are located in the East Singhbhum, Latehar & Palamu districts. They comprise lenticular ore bodies as well as Schist rocks with 80 to 36% magnetic. The exploration of these bodies is yet to be taken up. The existing steel mills are sourcing their iron ore (Hematite) from West Singhbhum. The Magnetite ore is being used in heavy media coal washeries & paints. Tata Steel's largest plant is located in Jamshedpur, Jharkhand, with its recent acquisitions; the company has become a multinational with operations in various countries. If the interest shown by all the companies, big and small, in Jharkhand's iron ore deposits translates into reality, the state will produce more than half the total steel in India. First Iron & steel factory  is located at Jamshedpur and Largest Steel plant in Asia is Bokaro steel plant.

 

GOVERNMENT POLICIES:

Under the new industrial policy, iron and steel has been made one of the high priority industries. Price and distribution controls have been removed  as well as foreign direct investment up to 100% (under automatic route) has been permitted.  The Trade Policy has also been liberalized and import and export of iron and steel is freely allowed with no quantitative restrictions on import of iron and steel items. Tariffs on various items of iron and steel have drastically come down since 1991-92 levels and the government is committed to bring them down to the international levels.  With the abolishing of price regulation of iron and steel in 92, the steel prices are market determined. The policy devises a multi-pronged strategy to achieve these targets with following focus areas; removal of supply constraints especially availability  of critical inputs like iron ore; improve cost competitiveness by expanding and strengthening the infrastructure in roads, railways, ports and power; increase exports; meet the additional capital requirements by mobilizing financial resources; promote investments by removing  procedural delays. In addition the policy also addresses challenges arising out of environmental concerns, human resource requirements, R&D, volatile steel prices and the secondary sector. 

 

Rural Industries: Project Opportunities in Jharkhand

 

PROFILE:

Rural industry is an important source of employment for workers shifting out of agriculture. The rural industry continues to play a significant role in the expansion ofemployment, improvement in productivity and earnings, and poverty reduction in many non-industrialized countries; this is particularly the case in India. This sector has immense export potential which needs to be exploited to earn foreign exchange. To give thrust, the government aims to provide benefits in the various areas such as handloom, handicrafts, khadi village industries, forest based industries etc.

RESOURCES:

Handloom is labour intensive cottage industry sector providing employment to around 1.5 lakh weavers throughout the State. Various incentives to the handloom weavers are being provided under Deendayal Hastkargha Protsahan Yojana, which aims attaking care of wide gamut of activities, such as basic inputs like looms and accessories, product development, infrastructure support, institutional support, training to weavers, supply of equipment and marketing support, both at micro and macro levels in an integrated and coordinated manner for an overall development of the sector and benefit to handloom weavers. Handicrafts of Jharkhand reflect the cultural heritage, customs and traditions of the State. The State manufactures handicrafts in cane and bamboo works, woodcarving, stoneware, brassware, Lac based handicraft items, paper mache, terracotta, etc. The State Government may set up a model suitable ‘Handicraft Village’ in each of the districts of the State for promoting the traditional arts and crafts of the villages by adopting the "One Tambon One Product" model of Thailand. Various forest produce available in the state are mahua seed, sal seed, shellac, bamboo, kendu leaf, harre, bahera, etc.

 

GOVERNMENT POLICIES:

Focus of the Rural Industrial Policy:-

1.       Providing ample employment opportunities through rural industries.

2.       Establishing rural industries and providing help on priority basis for skill enhancement, modern technology, and marketing especially for beneficiaries of scheduled caste, scheduled tribe, backward, and minority sections.

3.       Giving priority to participation of women in development of rural industries.

4.       Encouraging participation of private sector, non-governmental organizations, cooperative societies, and self help groups for development of rural industries.

5.       Implementing cluster approach.

6.       Value addition to the minor forest produce and medicinal herbs in the tribal areas of the state itself and passing on the benefits to the tribal population of the area.

7.       Connecting rural industries with E-commerce.

With the implementation of the Rural Industrial Policy, active participation of experienced craftsmen and industrialists in the field of handloom, handicraft, leather industry, other cottage industries and silk centers would be ensured for overall development of rural industries in the rural areas.

 

 

Tourism: Project Opportunities in Jharkhand

 

PROFILE:

Tourism is one of the fastest growing industries in the world. The number of tourists worldwide has been registering phenomenal growth and it is expected that this number would shortly touch 1.5 billion. Tourism contributes about 11% of the world work force and 10.2% of the global gross domestic products. The dynamic growth of this industry is evident from the fact that a new job is added to this sector every 2.5 second. Jharkhand is endowed with rich cultural heritage and bestowed liberally with bounties of nature. Various initiatives are being taken by the Government and other organizations to promote tourism here. Jharkhand is blessed with an exotic landscape: the rolling hills, beautiful plateaus, sparkling rivers, etc. that largely contribute towards tourism at Jharkhand. Besides, the national parks, wildlife sanctuaries, holy shrines and museums, etc. largely attracts tourists to come to Jharkhand.

RESOURCES:

Blessed with immense biodiversity, moderate climate, rich cultural and historical heritage, Jharkhand is fast emerging as an ultimate tourist destination in eastern India. Jharkhand Tourism Department is taking utmost initiative to promote tourism in Jharkhand. A good number of hotels run by Jharkhand Tourism and private hoteliers have come up at popular tourist spots, which cater to all segments of travellers. Several Jharkhand Tourism Information Centers have been opened up in various parts of the city. These information centers provide details about Jharkhand travel, hotels, tourist attractions, travel agencies, licensed Jharkhand tourism guides and other important travel tips to holiday makers. Some of the major tourist spots in Jharkhand that play a vital role in the tourism industry of Jharkhand are: Netarhat, Betla National Park, Baidyanath Dham so on. It is noteworthy in this context that Kanke Dam, Ranchi Hill, Tagore Hill, Hatia Dam, Dasham Falls, Jagannath mandir, Jonah Falls, Hoondru waterfalls, etc. are the projects under the Tourism Industry of Jharkhand that heavily contributes towards the economy of the State.

GOVERNMENT POLICIES:

Jharkhand has huge potential in tourism sector. The tourism potential of the state has not been exploited and at the same time tourist spots have not been highlighted at national and international level. Jharkhand government seems to be serious to promote tourism in the state. The State Government would set up a Jharkhand Tourism Development Board to facilitate enter departmental co-operation and coordination to promote Tourism in the State. This Board would be set up under the chairmanship of the Chief Minister of Jharkhand with the Tourism Minister as Vice-chairman and Principal Secretaries/Secretaries of other relevant departments as members. The Board would also have representatives of the Hotel Association, Travel Agents Association, Adventure Sports Operators Association, NGO's and other non-official members having outstanding contribution or expertise in the field of development and promotion of tourism industries. Financial assistance as grants-in-aid, etc would be provided (to this board). The Board would advise the Government to lay down the policy guidelines for the development and promotion of tourism industry in the State, to promote public-private partnership and public sector would undertake all steps to develop and promote tourism in the State.

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 57 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 57 336 337   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Bitumen Emulsion - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

Bitumen is defined as “A viscous liquid, or a solid, consisting essentially of hydrocarbons and their derivatives, which is soluble in trichloro-ethyelene and is substantially nonvolatile and softens gradually when heated. It is black or brown in colour & posseses waterproofing and adhesive properties. It is obtained by refinery processes from petroleum, and is also found as a natural deposit or as a component of naturally occurring asphalt, in which it is associated with mineral matte. Bitumen emulsion is one kind of speciality chemicals, which has large commercial uses as coating materials in the road construction and many other construction fields. It is also used as sealing material for the different type of laminated paper. Bitumen is available in the nature also and it is the byproduct of petroleum distillation plant or coal carbonization plant. Uses Most bituminous binders are used in the construction of roads. These are viscous semisolids at normal temperature. Therefore these require to be brought to a fluid state by heating, by dilution with solvent or by emulsifying before being applied in thin film. Use of emulsions facilities not only flows at atmospheric temperature but also application to damp road surfaces and wet aggregates. Bitumen emulsions are dispersions of very fine bitumen particles in an aqueous medium. They are easy to handle and find a wide application in road construction and maintenance; soil stabilization; grouting; tack coating; surface dressing;crack filling; seal coating; premixing; dust laying and in various other special circumstances where cold application of bitumen is desirable. The bitumen market was valued at USD 71.44 billion in 2013 and is likely to reach USD 93.38 billion by 2020, expanding at a CAGR of 3.9% during the forecast period from 2014 to 2020. In terms of volume, the global demand for bitumen stood at 108,348.9 kilo tons in 2013. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Art Infra Solutions Pvt. Ltd. • B G H Exim Pvt. Ltd. • Bitchem Asphalt Technologies Ltd. • Hemi Petro Products Ltd. • Hindustan Colas Ltd. • Indian Oil Corpn. Ltd. • Kochi Refineries Ltd. • Modern Road Makers Pvt. Ltd. • Ojas Technochem Products Ltd. • Stanpacks (India) Ltd. • Tinna Rubber & Infrastructure Ltd.
Plant capacity: 50 MT/DayPlant & machinery: Rs 143 Lakhs
Working capital: -T.C.I: Cost of Project :Rs 372 Lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Condoms - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics

Control of fertility continues to be an important issue through the world even though the population growth rate has shown a steady decline in many countries, partly owing to the extensive use of condoms (male) or with use of oral contraceptives (female). Rubber condoms (male) are used by the majority of man today for enjoying the sexual intercourse. The function of the condoms it’s to collect the sperm created by the man during sexual intercourse. This condom prevents the sperm in penetrating into the female reproductory organ. The condoms or contraceptives (male) are usually made from natural rubber (latex). The rubber is used because of the unique physical properties which are Elasticity; Flexibility; Impermeable. The use of condoms or contraceptives results in steady decline in population of growth. In rural areas where peoples are illiterate & uneducated about sexual education did not utilized condoms or contraceptive. So the Government of India made a special programme to educate them about sexual education. The Government also made a special family planning programme for the rural areas. They generally advice the population or people of the rural areas to use condoms or other related things to check the greatly increasing population. In rural & urban areas the government sold condoms or contraceptive free of cost from and government dispensary & hospital. At present the country's total demand of condom is being fulfilled by total three manufacturing units. Hindustan Latex Ltd. of Kerala is Central public sector undertaking was set up in 1969 to manufacture Condoms. It is the largest manufacturer of Condoms in the country today and produces thinnest variety of Condoms in the world. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Cupid Ltd. • Famy Care Ltd. • H L L Lifecare Ltd. • J K Ansell Ltd. • London Rubber India Ltd. • Medtech Products Ltd. • Pashupati Seohung Ltd. • T T K Biomed Ltd. • T T K Healthcare Ltd. • T T K Protective Devices Ltd.
Plant capacity: 116,666.7 Pcs /DayPlant & machinery: Rs 139 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 400 Lakhs
Return: 25.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Sweet & Scented Supari in Pouches - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Plant Layout

The betel nut (Supari) tree, which is known as "ARECA" in South India. It is planted in Bengal, Mysore, Sri Lanka etc. Its yield considered being very good in Sri Lanka. The betel (Piper betle) is the leaf of a vine belonging to the Piperaceae family, which includes pepper and kava. It is valued both as a mild stimulant and for its medicinal properties. Betel leaf is mostly consumed in Asia and elsewhere in the world by some Asian emigrants, as betel quid or in paan, with or without tobacco with adverse health effects. Betel is notable for staining the teeth of regular users. It is found in various places and its yield is different due to changed climate. Betel nut chewing has been practiced by natives in various countries since times. So keeping in mind its demand manufacturer utilising supari as a raw material for making various chewing material as Supari, Pan chapp gutaka, Pan Masala, Mayur brand sweet supari, scented supari etc. People chew it for stress reduction, feelings of well-being, and heightened awareness. It contains three major alkaloids: arecoline, pilocarpine, and muscarine. ? USES 1. It is used to refresh the mouth. 2. It freshens up mouth and breathes with its flavour. 3. It is chewed by all age group people. 4. It is served to guests after lunch and dinner to keep mouth fresh. 5. It helps in digestion of food after meals 6. It is served in marriages, parties or any other special occasions. 7. It is a direct substitute of pan, pan masala etc. 8. Widely used in religious and social functions. Cost Estimation Capacity • Sweet & Scented Supari (2 gms Size Pouches) : 83,333.3 Pouches /Day • Sweet & Scented Supari (5 gms Size Pouches): 33,333.3 Pouches / Day • Sweet & Scented Supari (10 gms Size Pouches): 16,666.7 Pouches / Day
Plant capacity: -Plant & machinery: Rs 9 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 192 Lakhs
Return: 27.00%Break even: 45.00%
Add to Inquiry Add to Inquiry Basket

Contact Adhesive - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

An adhesive is any substance applied to the surfaces of materials that binds them together and resists separation. The term "adhesive" may be used interchangeably with glue, cement, mucilage, or paste. Adjectives may be used in conjunction with the word “adhesive” to describe properties based on the substance's physical or chemical form, the type of materials joined, or conditions under which it is applied. The use of adhesives offers many advantages over binding techniques such as sewing, mechanical fastening, thermal bonding, etc. These include the ability to bind different materials together, to distribute stress more efficiently across the joint, the cost effectiveness of an easily mechanized process, an improvement in aesthetic design, and increased design flexibility. Adhesives may be found naturally or produced synthetically. The earliest human use of adhesive-like substances was approximately 200,000 years ago. There is hardly any product in our surroundings that does not contain at least one adhesive – be it the label on a beverage bottle, protective coatings on automobiles or profiles on window frames. Applicators of different adhesives are designed according to the adhesive being used and the size of the area to which the adhesive will be applied. The adhesive is applied to either one or both of the materials being bonded. The pieces are aligned and pressure is added to aid in adhesion and rid the bond of air bubbles. Polychloroprene contact adhesives are used for bonding high-pressure laminates, automotive trim, roofing-membrane attachment, furniture, kitchen cabinets, custom display cabinets, interior and exterior panels, wall partitions, shoe soles, and many other applications where quick, high-strength, permanent bonds are needed. Thus, as an entrepreneur, contact adhesive production offers an exciting opportunity to you.
Plant capacity: Contact Adhesive: 160 Kgs/DayPlant & machinery: Rs 32 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 220 Lakhs
Return: 10.00%Break even: 64.00%
Add to Inquiry Add to Inquiry Basket

Mattress & Quilt - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Layout

A mattress is a large pad for supporting the reclining body, used as or on a bed. Mattresses may consist of a quilted or similarly fastened case, usually of heavy cloth, that contains hair, straw, cotton, foam rubber, etc.; a framework of metal springs; or they may be inflatable. Mattresses are usually placed on top of a bed base which may be solid, as in the case of a platform bed, or elastic, e.g. with an upholstered wood and wire box spring or a slatted foundation. Flexible bed bases can prolong the life of the mattress. Popular in Europe, a divan incorporates both mattress and foundation in a single upholstered, footed unit. Divans have at least one innerspring layer as well as cushioning materials. They may be supplied with a secondary mattress and/or a removable "topper." A quilt is a type of blanket, traditionally composed of three layers of fiber: a woven cloth top, a layer of batting or wadding, and a woven back, combined using the technique of quilting. A quilt is distinguishable from other types of blanket because it is pieced together with several pieces of cloth. “Quilting” refers to the technique of joining at least two fabric layers by stitches or ties. In most cases, two fabric layers surround a middle layer of batting (cotton, polyester, silk, wool or combinations of fibers) which is a lighter, insulating layer. Batting is often referred to as “wadding” in Britain. Some modern quilts are made with an upper fabric layer, quilted to a layer of microfleece, perhaps without a fabric backing. The most decorative fabric surface is called the “top”, and is the design focus. A single piece of fabric (a “whole cloth quilt”) may be used as the top, or the top may be “pieced” from smaller fabric pieces. Sewing together smaller pieces of fabric into a larger patchwork "block" of fabric creates the basic unit. Few Indian Major Players are as under • Dunlop Comforts Pvt. Ltd. • Gandhigram Rubbers Ltd. • India Tyre & Rubber Co. (India) Ltd. • Kontak Comforts Pvt. Ltd. • M B I Intercorp Ltd. • M M Rubber Co. Ltd. • Oriental Veneer Products Ltd. • Southern Latex Ltd.
Plant capacity: Mattress 200 Nos/Day, Quilt:1000 Nos/DayPlant & machinery: Rs 63 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 364 Lakhs
Return: 28.00%Break even: 54.00%
Add to Inquiry Add to Inquiry Basket

Cold Storage - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

India is the largest producer of fruits and second largest producer of vegetables in the world. Fruits & vegetables, being perishable in nature require certain techniques of preservation for retaining the freshness intact and making them an acceptable item even after few days of ripening. It also facilitates the farmer to realize a better price instead of selling the product at a throw away price due to the perishability. This necessity as evolved a new concept of storing these items at below or just above sub-zero temperatures known as cold storage. Introduction of Cold storage / Cold room facility will help them in removing the risk of distress sale and simultaneously will ensure better returns. The annual production of fruits and vegetables in the country accounts for 18 to 20% of our agriculture output. Varied agro climatic conditions and better availability of scientific package of practices, there is a vast scope for increasing the production. Cold Storage is a special kind of room, the temperature of which is kept very low with the help of machines and precision instruments. India is having a unique geographical position and a wide range of soil, thus producing variety of fruits and vegetables like apples, grapes, oranges, potatoes, chillies, ginger, etc. Marine products are also being produced in large quantities due to large coastal areas. As per 2008-09 figures, India produces around 215 Million Tons of Fruits and Vegetables, 3 Billion Tons of Marine Products, 109 Million Tons of Milk, 56 Billion Eggs and 38 Million Tons of Meat per annum. Commercially apples, potatoes, oranges, etc are stored on large scale in the cold storages. Other important costly raw materials like dry fruits, chemicals, essences and processed foods like fruit juice/pulp, concentrate dairy products, frozen meat, fish and eggs are also stored in cold storages to regulate marketing channels of these products. Therefore, it is a good project for entrepreneurs to invest. Uses Cold storage is used to preserve fruits and vegetables. Once they are kept in the cold storage, they do not get spoiled even after many months. Sometimes, in production season of certain vegetable or fruit crops, the demand for those thing decreases, which in turn decreases the consumption in surplus amount of that particular item and it is kept in a cold storage. Few Indian Major Players are as under • Allana Cold Storage Ltd. • Anjaneya Cold Storage Ltd. • Asvini Fisheries Pvt. Ltd. • H M G Industries Ltd. • Hindusthan Ice & Cold Storage Co. Ltd. • Ideal Ice & Cold Storage Co. Ltd. • Indagro Foods Ltd. • Jindal Steel & Alloys Ltd. • Karnavati Cold Storage Ltd. • Karnimata Cold Storage Ltd. • Kisan Cold Storage & Refrigeration Service Ltd. • Mohan Meakin Ltd. • Nav Bharat Refrigeration & Inds. Ltd. • Prabhu Hira Ice & Cold Storage Ltd. • Ram'S Assorted Cold Storage Ltd. • Sri Vatsa Hotels Ltd. • Universal Cold Storage Pvt. Ltd. • Uptown Trading & Investments Ltd.
Plant capacity: 3000 MTPlant & machinery: Rs 266 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 882 Lakhs
Return: 26.00%Break even: 43.00%
Add to Inquiry Add to Inquiry Basket

PVC Wire & Cables - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities, Cost and Revenue

The generation, transmission, and distribution of power involve electrical facilities, apparatus, and components, to carry the electrical energy from its generating site to where it is utilized. An important part of this power system is the cable system that is used exclusively to carry power from the main substations to secondary substations at load centers. Low-voltage cable is used to distribute power from the load centers to utilization equipment in conduits and ducts, even though other methods such as cable trays, direct burial for outdoor applications, and aerial cable are used. Electrical, mechanical, and environmental considerations are the main factors in selecting and applying cable systems for distribution and utilization of electrical power. Cables are the source of carrying power and signal in power plants, refineries, process industries. Cable network can carry fire from one place to another in the event of fire caused due to external sources or due to short circuit. Power cable industry in India is eyeing an estimated Rs 50 bn market to unfold. About 78,000 MW of power generation capacity and 60,000 circuit km of transmission network are projected to be added by 2012 according to the Eleventh Five Year Plan. Capex required for every MW of power generating capacity is about Rs 40 mn. Expenditure required in the Eleventh Five Year Plan for power generation has been estimated at Rs 270 bn. As a whole it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Bindawala Cables & Conductors Ltd. • Gem Cables & Conductors Ltd. • I L A C Ltd. • Industrial Cables (India) Ltd. • Omega Cables Ltd. • Opal Industries Ltd. • Sanco Industries Ltd. • Skytone Electricals (India) Ltd. • Torrent Cables Ltd. • Universal Cables Ltd. • Vimal Flexsol Ltd.
Plant capacity: Single Core Wires (THHN/THWN) 60 KM/Day,Single Core Stranded (CU/PVC)45 KM/Day,Multiple-Core Flexible-Wire (Sheathed)21 KM/DayPlant & machinery: Rs 55 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 189 Lakhs
Return: 31.00%Break even: 71.00%
Add to Inquiry Add to Inquiry Basket

Maize Processing (Glucose, Sorbitol and Oil) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Glucose is a monosaccharide (or simple sugar) also known as grape sugar, blood sugar, or corn sugar, is a very important carbohydrate in biology. The living cell uses it as a source of energy and metabolic intermediate. Glucose is one of the main products of photosynthesis and starts cellular respiration in both prokaryotes (bacteria and archaea) and eukaryotes (animals, plants, fungi, and protists). Sorbitol, also known as glucitol, is a sugar alcohol, which the human body metabolizes slowly. It can be obtained by reduction of glucose, changing the aldehyde group to a hydroxyl group. Most sorbitol is made from corn syrup, but it is also found in apples, pears, peaches, and prunes. It is synthesized by sorbitol-6-phosphate dehydrogenase, and converted to fructose by succinate dehydrogenase and sorbitol dehydrogenase. Succinate dehydrogenase is an enzyme complex that participates in the citric acid cycle. Corn oil (maize oil) is oil extracted from the germ of corn (maize). Its main use is in cooking, where its high smoke point makes refined corn OIL a valuable frying oil. It is also a key ingredient in some margarines. Corn oil is generally less expensive than most other types of vegetable oils. The corn contains corn oil 2.8% by weight. Corn oil is also a feedstock used for biodiesel. Other industrial uses for corn oil include soap, salve, paint, rust proofing for metal surfaces, inks, textiles, nitroglycerin, and insecticides. It is sometimes used as a carrier for drug molecules in pharmaceutical preparations. A large part of the demand for starches arises from the paper, textile, construction and pharmaceutical industries. Their use in foods is growing at a low rate. Thus, due to demand it is a good project for entrepreneurs to invest. Few Indian Major Players are as under • Advanced Bio-Agro Tech Ltd. • Advanced Enzyme Technologies Ltd. • Anil Nutrients Ltd. • Aries Agro Ltd. • Aries Marketing Ltd. • Godrej Agrovet Ltd. • Hanuman Minor Oils Ltd. • Indo Euro Indchem Ltd. • Intercorp Biotech Ltd. • Jupiter Biotech Ltd. • K S E Ltd. • Kapila Krishi Udyog Ltd. • Kerala Feeds Ltd. • Maharashtra Agro-Inds. Devp. Corpn. Ltd. • Metahelix Life Sciences Ltd. • Origin Agrostar Ltd. • Pan Asia Global Ltd. • Pranav Agro Inds. Ltd. • Sonitpur Solvex Ltd. • Sukhjit Starch & Chemicals Ltd. • Superhouse Ltd. • Tara Health Foods Ltd. • Tirupati Starch & Chemicals Ltd. • Zeus Biotech Ltd.
Plant capacity: Glucose 60 MT/Day,Sorbitol40 MT/Day, Maize Oil 12 MT/DayPlant & machinery: Rs 5405 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 7732 Lakhs
Return: 25.00%Break even: 46.00%
Add to Inquiry Add to Inquiry Basket

Medical College with Hospital - Detailed Project Report, Profile, Business Plan, Trends, Market Research, Survey, Feasibility Study, Investment Opportunities, Cost and Revenue, Plant Economics, Working Capital Requirement, Plant Layout, Cost of Project

A medical college is meant to impart education of medical field to students to qualify them as doctors in different specialized disciplines so as to treat patients suffering from various ailments. Doctors with their dedicated spirit serve the nation at large by providing medication and treatment for eradication of diseases, which exchange health and add suffering to humanity. Normally a medical college is associated with a hospital. Hospitals provide the facilities of O.P.D. and admission for seriously ill seriously injured, seriously burnt and pregnant ladies, causalities etc. Presently, every city or town in India has no. of private hospitals furnished with latest medical facilities available and with more qualified surgeons, physicians and specialist doctors. Even sometimes, they are furnished with more modern machines than those available in the nearby Government Hospital. These hospitals can be seen well crowded as they provide very good service at a smile. As they are run by privates very good medical care is provided by them. A private hospital is a place where one may get treatment from ordinary fever to a major surgery operation. As a matter of fact, no limitation has been made for the facilities available in a hospital. However, generally all private hospitals are provided with latest facilities and ultra modern machines. In a hospital, surgeons, physicians, E.N.T., specialists, children specialist, Eye-surgeon, psychologists and sex-specialist are essential.
Plant capacity: Total Students per Annum:150 Students Admitted/Annum 700 Beded HospitalPlant & machinery: Rs 2047 Lakhs
Working capital: -T.C.I: Cost of Project : Rs 31862 Lakhs
Return: 1.00%Break even: 36.00%
Add to Inquiry Add to Inquiry Basket

Milk Powder (SMP, WMP and Dairy Whitener) - Manufacturing Plant, Detailed Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey, Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment Opportunities

Powdered milk is a dairy product produced from cow milk. Cow milk basically contains water, fats, protein sugar and ash. About 86% to 88% of cow milk by weight is water. Milk powder is prepared by skimming the milk whereby a considerable but proportional cream substance is extracted before it is powdered. The processed milk powder, after some vitamins are added is packed in fully galvanized metal cans or plastic bags. Skimmed milk powder is deficient in fat and fat soluble vitamins but the proteins, water-soluble vitamins and minerals are preserved. Skimmed milk powder contains almost the same amount of proteins (26%) and carbohydrates (37%) as in the liquid form. However the water and the fat percentage is decreased to nil. As it is considered to be zero fats, it is a good substitute of whole milk and can be taken by patients with high cholesterol levels and cardiac problems. Skimmed Milk powder is also fortified with vitamins A and D. Vitamin A helps to improve vision whereas Vitamin D helps in the strengthening on bones. Both the vitamins play an important role in maintenance and repair of Skin. The calcium present in it promotes growth and maintenance of teeth and bones at every stage in life. Dairy Whitener is an alternative to making availability of condensed milk more convenient for people. In a vast country like India, any product’s availability is a matter of concern. The Dairy Whitener is prepared to keep intact the richness, smoothness and original taste which when added to tea or coffee adapts well. It is primarily preferred for being fat free with the process of skimming done in confirmation with the highest standards of quality. India is a major consumer of tea and coffee, which offers a very large market for dairy creamers. In addition to domestic consumption, the whiteners/creamers find a high level of institutional acceptance, especially by railways; hotels and restaurants; airlines; hospitals and nursing homes; and corporate offices. Any entrepreneur venture into this field will be successful. Few Indian Major Players are as under • Anik Industries Ltd. • Brooke Bond Lipton India Ltd. • Continental Milkose (India) Ltd. • Haryana Milk Foods Ltd. • Hatsun Agro Products Ltd. • Heritage Foods Ltd. • Herman Milkfoods Ltd. • Industrial Progressive (India) Ltd. • Kamala Sugar Mills Ltd. • Milk Specialities Ltd. • Narayan Agro Foods Ltd. • Olam Exports (India) Ltd. • P G Foods & Brewaries (I) Ltd. • Panchmahal District Co-Op. Milk Producers' Union Ltd. • Param Dairy Ltd. • Parul Foods Specialities Pvt. Ltd. • Premier Industries (India) Ltd. • S M Milkose Ltd. • Sarthak Industries Ltd. • Suman Agritech Ltd. • Swojas Energy Foods Ltd. • Umang Dairies Ltd.
Plant capacity: Skimmed Milk Powder 8.00 MT/Day • Whole Milk Powder 2.67 MT/Day • Dairy Whitener 1.50 MT/DayPlant & machinery: Rs 387 Lakhs
Working capital: -T.C.I: Cost of Project: Rs 973 Lakhs
Return: 27.00%Break even: 56.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 57 of 337 | Total 3361 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 57 336 337   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top