Google Search

Search

Already a Member ?

Best Business Opportunities in Bahrain, Middle East - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 16 of 34 | Total 337 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 33 34   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Start Profitable Manufacturing Business of Disposable Plastic Syringes | Opportunities for Entrepreneurs to Start Own Business in Medical Disposables.

Doctors had to use and reuse the same syringe on multiple patients until the medical industry advanced dramatically. This is due to the fact that syringes were pricey and scarce. As a result, it was critical for all doctors to properly sanitise the syringe after each use and sharpen it on a regular basis. Despite the fact that most doctors followed the recommendations to the letter, many of them failed to properly disinfect and preserve the syringe. As a result, many diseases began to spread. Disposable syringes are a significant advancement because they are inexpensive and can be discarded after one use by doctors. As a result, the risk of infections spreading is reduced. Disposable syringes contain a plastic body and come in a variety of sizes. They may come with needles connected in some circumstances. A cover is placed to the needle to prevent harm and to keep the needle sanitised at the same time. The most obvious benefits of using a disposable syringe are sterilisation and safety. Patients no longer have to rely on the doctors' sterilising measures for their safety thanks to the introduction of disposable syringes, which are disposed away after one use. As a result, there is no risk of cross-contamination. Another advantage of disposable syringes is their low cost. These disposable syringes are far less expensive than standard syringes and do not require any maintenance. Furthermore, the doctors are not required to sharpen them. As a result, they will be able to focus more on the patients rather than the costly medical institutions. The worldwide syringe market is estimated to reach $15.99 billion by 2021, up from $10.56 billion in 2016, with a CAGR of 8.7% over the forecast period. The market for syringes is growing due to a high prevalence of chronic diseases around the world, a growing elderly population, increased acceptance of safety syringes, technical improvements, and increased demand for vaccines. The high cost of safety syringes and the rising prevalence of needle stick injuries, however, are the market's primary hurdles. For companies involved in the development and manufacturing of syringes, emerging Asia-Pacific regions provide significant growth opportunities. The important factors driving the market expansion of syringes in this area include increasing technological advancements, increasing attention of global companies, fast urbanization, supportive regulatory policies for the approval of new injectable, and rapid growth in the ageing population. The sizes and growth rates of the syringes market and its sub segments were calculated using a combination of bottom-up and top-down methodologies. These syringes are affordable and ready to use in a sterilized state, reducing the risk of contamination and infection dissemination to the patient. These ready-to-use products have also aided in preventing the spread of AIDS among individuals. The market for disposable syringes is primarily driven by rising demand for these items for administering medication intravenously or intramuscularly to cure ailments. Key Players: • Albert David Ltd. • Baxter Pharmaceuticals India Pvt. Ltd. • Becton Dickinson India Pvt. Ltd. • Disposable Medi-Aids Ltd. • Hindustan Syringes & Medical Devices Ltd. • Lifelong Meditech Ltd. • Novo Nordisk India Ltd.
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

Start Assembling of Lithium Ion Battery (Battery Assembly)

A lithium-ion battery, often known as a Li-ion battery, is a rechargeable battery in which lithium ions flow via an electrolyte from the negative electrode to the positive electrode during discharge and then back again during charging. A lithium-ion battery's positive electrode is constructed of an intercalated lithium compound, while the negative electrode is commonly graphite. With the exception of LFP cells, lithium-ion batteries have a high energy density, no memory effect, and a low self-discharge rate. Either energy or power density can be emphasised in cells. However, because they contain flammable electrolytes, they can pose a safety risk. Which, if damaged or wrongly charged, can result in explosions and flames. • More Compact Design: Li-ion batteries are smaller and lighter than traditional rechargeable batteries when compared to their capacity, and are thus used in portable consumer electronics devices where weight and form factor are important selling points. • Lower Self-discharge and Longer Shelf Life: While compared to other rechargeable batteries, Li-ion batteries have a lower self-discharge rate of about 1.5 percent per month, allowing for a longer shelf life when not in use due to the slower drain. • Fast Charging: Lithium-ion batteries charge faster than other rechargeable batteries including lead acid, nickel-metal hydride, and nickel-cadmium. • Low Maintenance: Lithium-ion batteries do not need to be maintained in order to function properly. • High Open-Circuit Voltage: Due to their chemistry, Li-ion batteries have a higher open-circuit voltage than other batteries such as lead acid, nickel-metal hydride, and nickel-cadmium. From 2021 to 2030, the global lithium-ion battery market is expected to grow at a CAGR of 12.3%, growing from USD 41.1 billion in 2021 to USD 116.6 billion in 2030. The market's growth can be attributed to increased demand for lithium-ion batteries in electric vehicles (EVs) and grid storage, since they offer high-energy density and lightweight solutions. Due to a growth in the registration of electric vehicles and a decrease in the price of lithium-ion batteries, the market size is predicted to grow throughout the forecast period. Market expansion is predicted to be fueled by an increase in electric vehicle sales as well as a shift in customer preferences. The rising number of solar installations and nuclear power plants, as well as the launch of wind energy projects, are likely to propel market growth over the forecast period. Few Indian Major Players 1. Anand Batteries Ltd. 2. Bharat Electronics Ltd. 3. Carborundum Universal Ltd. 4. Eon Electric Ltd. 5. H B L Power Systems Ltd. 6. Luminous Power Technologies Pvt. Ltd.
Plant capacity: 48 Volt, 60 AH Lithium-Ion Battery Pack 10 Nos per day 48 Volt, 80 AH Lithium-Ion Battery Pack 10 Nos per day 48 Volt, 100 AH Lithium-Ion Battery Pack 10 Nos per day 60 Volt, 20 AH Lithium-Ion Battery Pack 10 Nos per day Plant & machinery: Rs. 165 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 538 Lakhs
Return: 29.00%Break even: 67.00%
Add to Inquiry Add to Inquiry Basket

Profitable Growing Industry of Medical Disposables (Gowns/Drapes)

Doctors and nurses in the operating room use surgical gowns to prevent the transmission of germs and body fluids from the operating staff to the patient, as well as from the patient to the operating staff. Surgical gowns must meet a variety of well-documented performance requirements. Surgical gowns must be disease and infection resistant while also allowing for sufficient mobility. They must allow for adequate mobility while also preventing rubbing, chafing, ripping, and linting. They should fit snugly but not tightly. Because there is generally excess fabric, the gowns must withstand constant pulls on the fabric during normal motions. A surgical drape is a disposable, non-woven covering that is used to cover a patient's region. The surgeon can perform the surgery through a fenestration (an opening) in the drape. Depending on the type of operation, it comes in a variety of sizes. The drapes in each hospital are different. A 15-square-inch drape with a 3-square-inch fenestration could sufficient for an eye operation, but open heart surgery necessitates the largest drape possible, a laparotomy drape that covers the entire body. Surgical drapes keep the operating area clean and free of bacteria. The adhesive tape must attach securely to both the drape material and the patient's skin in order to accomplish this; its performance cannot be affected by the sterilisation procedure or compromised by pre-operative cleaning chemicals. For Surgical Procedures, Gowns and Drapes The market is predicted to grow at a CAGR of 4.42 percent from 2021 to 2028, from USD 2.28 billion in 2020 to USD 3.23 billion in 2028. The Surgical Drapes and Gowns market is being driven by an increase in surgical operations due to sports injuries, accidents, and heart surgeries due to a greater frequency of cardiovascular disorders and other chronic ailments where surgery is indicated as needed. Surgical gowns and drapes are also in high demand due to increased demand for patient and healthcare worker protection, as well as an increase in the prevalence of surgical site infections. Few Indian Major Players 1. PrimewearHygine (India) Product Ltd. 2. RaajMedisafe India Ltd. 3. Surgeine Healthcare (India) Pvt. Ltd. 4. VikramNuvotech India Pvt. Ltd.
Plant capacity: Medical Gowns 1,250 Pcs Per Day Medical Drapes 1,250 Pcs Per DayPlant & machinery: Rs. 286 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 611 Lakhs
Return: 26.00%Break even: 53.00%
Add to Inquiry Add to Inquiry Basket

Automated Vehicle Scrapping and Recycling Unit

Vehicle recycling is the deconstruction of cars for spare parts. When vehicles reach the end of their useful lives, they have value as a source of replacement components, which has given rise to the car dismantling industry. Wrecking yards, auto dismantling yards, automotive spare parts suppliers, and, more recently, auto or vehicle recycling are all phrases that have been used to characterise the industry's business outlets. Vehicle recycling has long been a component of the process, but manufacturers have become increasingly active in recent years. A car crusher is commonly used to reduce the size of a junk car so that it can be transferred to a steel mill. The "Voluntary Car-Fleet Modernization Program," also known as India's vehicle scrapping programme, intends to usher in a new era of what it means to own and use a car in India. Nitin Gadkari, the Minister of Road Transport and Highways, introduced it in Parliament in March. The programme demands that all automobiles above a certain age be taken off the road in order to achieve higher pollution control and safety, which new vehicles provide. A commercial vehicle over 15 years old or a personal vehicle over 20 years old that fails an automatic fitness test, regardless of whether it runs on diesel or gasoline, is earmarked for scrapping. As a result, automobile recycling is essential. It's also crucial to handle them properly to avoid hazardous waste from being released into the environment. Such vehicles must be disposed of by professionals who are familiar with hazardous chemicals such as fuel, coolants, and brake fluids. Environmental Benefits: Steel is one of the most significant materials in the automobile's construction; it's utilised to make the bulk of the components, including the framework. Because iron ores are required for the production of steel, recycling automobiles contributes to the preservation of iron ores. All waste generated as a by-product of steel processing is avoided as well, guaranteeing that air pollution is not increased. Wildlife Preservation: It's also worth mentioning that proper car recycling can help preserve local flora and fauna. Steel mining is bad for the environment because it produces soil erosion and degradation, which means animals can't keep up with their normal habits and may become unwell as a result. Land erosion causes sediment flow into bodies of water, which has an impact on water quality and wildlife proliferation.
Plant capacity: 1000 Vehicles per MonthPlant & machinery: Rs. 497 Lakhs
Working capital: -T.C.I: Cost of Project: Rs. 2090 Lakhs
Return: 29.00%Break even: 40.00%
Add to Inquiry Add to Inquiry Basket

Demanding Business of E-Rickshaw Assembling

E Rickshaws are three-wheeled battery-operated vehicles that are considered an upgrade to traditional rickshaws and are more cost-effective than auto rickshaws and other fuel variants. These rickshaws have zero emissions and are frequently argued to be much better than other rickshaws because they are almost pollution-free. E rickshaws are becoming increasingly popular among rickshaw drivers, and they have opened up new prospects for people because they require little investment to earn a living. They provide significant returns in a short period of time, are simple to operate, and have low maintenance and operating costs. Because of its low maintenance costs, low fuel costs, environmental friendliness, lack of noise pollution, ease of operation, and last but not least, livelihood, e-rickshaws have become one of the most popular modes of transportation on city streets. The earnings for an e-rickshaw driver are pretty substantial without putting in much physical effort or investing much money, and it is thus a vital means of income for many. These e-rickshaws have three wheels and a differential system at the back. The chassis of these vehicles is made of mild steel tubing. E-Rickshaw Benefits • Environmentally friendly — because they are battery-powered, e-rickshaws may be the ideal alternative to petrol or diesel-powered cars. Because these rickshaws do not release smoke, they will not contribute to rising air pollution levels. The batteries that will be utilised to power these rickshaws may be effectively recycled, so resolving the issue of battery disposal. • Economical – E-rickshaws are relatively inexpensive and can be readily afforded by the average person. Passengers will be charged a lower transportation fee. It is cost-effective not only for customers, but also for business owners. The batteries can be readily recharged at home or anywhere else that has a suitable voltage. • No Noise Pollution — E-rickshaws do not generate any sound, thus they do not contribute to noise pollution. Passengers can enjoy a pleasant and relaxing trip. • Income — E-rickshaws provide a source of income for both literate and illiterate persons. E-rickshaw drivers may make a solid living without spending a lot of money. • Safety — when compared to other fuel-powered vehicles, e-rickshaws pose a lower danger. Because they are slower and lighter than an auto rickshaw, they are less likely to cause an accident. In the event of fuel-operated vehicles, there is a risk of explosion. • Low Maintenance - Because the engines are powered by electricity, they do not require any fuel. Because e-rickshaws do not have an engine or a transmission, they require less maintenance. In these rickshaws, the motor is smaller, and the battery is located below it. As a result, maintaining them is much easier. During the forecast period, the worldwide e-Rickshaw market is expected to grow at a CAGR of roughly 9%. The market's growth can be attributable to cheap transportation costs and low power consumption. E-rickshaws are widely acknowledged as a viable alternative to diesel, gasoline, and compressed natural gas auto rickshaws. Increasing public awareness of air pollution and other environmental issues that can be mitigated through the use of e-rickshaws. The controller, motor, batteries, harness, and throttle are the primary electronic components that make up the drive of an e-rickshaw. Any mismatch between these components is unpleasant and can lower performance. During this time, the worldwide e-Rickshaw market is expected to grow at a CAGR of roughly 9%. The market's growth can be attributable to the cheap cost of transportation, which is attributed to more mileage and lower power usage. The e-rickshaw market is expected to be driven by an increase in sales and production of electric cars as an alternative to fuel-based mobility, owing to many government efforts and environmental laws on the electric vehicle industry.
Plant capacity: E-Rickshaw: 200 Nos per dayPlant & machinery: 2.06 Cr.
Working capital: -T.C.I: Cost of Project: Rs. 25.80 Cr.
Return: 30.00%Break even: 68.00%
Add to Inquiry Add to Inquiry Basket

Lithium Ion Battery (Battery Assembly) Most Profitable Industry to Launch Start-ups

It’s not hard to see why lithium ion batteries are so popular. They’re lightweight, long-lasting, and they have excellent discharge characteristics. But assembling these batteries isn’t as simple as it may seem, and this process requires plenty of precautions to ensure a safe assembly. If you’re looking to get started in the battery assembly business, these guides can help you with everything from product design to production controls. Visit this Page for More Information: Start a Business in Lithium-Ion Battery Production There are different kinds of lithium ion batteries, and they vary in many ways from one another. Lithium ion batteries are also made in different shapes and sizes, which also help to differentiate them from one another. Aside from their shape and size, lithium ion batteries differ in voltage and amperage (they can be either 3 volt or 4 volt, 1 amp or 2 amp). Related Business Plan: Start Assembling of Lithium Ion Battery (battery Assembly) Lithium Ion Battery Assembling Process Usually, all electrodes except cathode is assembled first, then powder coating process is followed by assembly of cathode and anode. Cathode sheet and anode sheet will be punched and stacked into pouch which will be folded with separator into cell. During Lithium Ion battery assembling process, first of all positive electrode (anode) is stacked on negative electrode (cathode), then pressed several times until electrode materials are firmly contact with each other. Watch Video: And then electrolyte solution (mixture of polyelectrolytes in organic solvent) is applied to all over electrodes, it's done for two reasons: 1. It prevents oxidation of metal particles at surface of anode; 2. Conductivity improvement through applying electrolyte between electrodes' surface and separator wall make it possible for current flow between them. After that, Heat sealing is used to weld (heat-weld) both ends of cathode cavity on aluminum foil at bottom of Lithium Ion battery pack to seal out atmosphere from inside. Related Feasibility Study Reports: Battery Projects, Automobile Batteries, Lead Acid Battery, Lithium Battery, Lithium-Ion (Li-Ion) Battery, Maintenance Free Rechargeable Battery, Battery Recycling, Battery Plate, Battery Separator Because exposure to air or water may affect capacity of battery when being used later. Positive electrode plate, negative electrode plate, separator and plastic backing plate form a sealed cavity without any contact with outside atmosphere which can maintain sufficient voltage when installed later. After batteries are heat sealed, if needed, electrical test devices can be connected to electric terminals. Then pressurized gas charging starts. Read our Books Here: Books and Database Pressure must reach twice as much as pressure during normal working process while charging time must not exceed 30 hours or cycle life of battery will decrease rapidly. Charging pressure depends on kind of materials used in electrode products but there’s no explicit regulation about it in official standards so that manufacturers tend to use lower than its standard pressure when making Lithium Ion batteries. Read Similar Articles: Battery Projects Benefits: The primary benefit of lithium ion batteries is that they don’t produce gases when they discharge, so they can be safely used in electronic devices. Lithium ions are lighter than other metals and liquids commonly used in batteries and offer a much higher capacity per unit volume. Because they have no liquid inside, they can charge quickly—in just 10 minutes or less! They also last longer than conventional rechargeable battery. Watch other Informative Videos: Battery Industry Market Outlook: A lithium-ion (Li-ion) battery is a rechargeable battery that uses lithium ions as one of its electrochemical components. Due to their expanding use in consumer devices, particularly mobile phones and tablets, the lithium ion battery industry has witnessed a major growth in demand in recent years. These batteries are also utilized in electric vehicles like hybrid cars and battery packs. As the need for energy storage grows, these batteries are being used more frequently in grid storage applications. The global lithium-ion battery market is expected to reach $129.3 billion by 2027, with a compound annual growth rate (CAGR) of 18.0% from 2020 to 2027. Higher energy efficiency requirements in technologically advanced consumer electronics are likely to give key companies with a growing lithium-ion battery market potential. See More Links: Start a Business in Asia Start a Business in Potential Countries for Doing Business Best Industry for Doing Business Business Ideas with Low, Medium & High Investment Looking for Most Demandable Business Ideas for Startups Start a Business in Africa Start a Business in India Start a Business in Middle East Related Videos Related Books Related Projects Related Market Research Reports
Plant capacity: -Plant & machinery: -
Working capital: -T.C.I: -
Return: 1.00%Break even: N/A
Add to Inquiry Add to Inquiry Basket

A Comprehensive Business Plan on Lithium Ion Battery (LiFePO4) Production

A lithium iron phosphate (LFP) battery is a form of lithium-ion battery that, when compared to other types of batteries, can charge and discharge at rapid speeds. It's a rechargeable battery whose cathode material is LiFePO4; hence the name. Lithium ferrophosphate (LFP) batteries are a type of lithium iron phosphate (LFP) battery. The main difference between lithium iron phosphate batteries and other lithium-ion batteries is that LFP can deliver a steady voltage and has a larger charge cycle, ranging from 2000 to 3000 cycles. LFP batteries are safe for the environment and architecturally sound. They have a low discharge rate and a low energy density. They don't get hot easily and stay cold compared to other batteries. The battery's composition protects it from thermal runaway, so it's regarded safe for residential usage. In the event of mismanagement during charge or discharge, lithium phosphate cells are incombustible; they are more stable under overcharge or short circuit situations, and they can sustain high temperatures without degrading. The phosphate-based cathode material will not burn and will not cause thermal runaway if abused. The chemistry of phosphorus also has a longer cycle life. Uses • Buses, electric automobiles, tour buses, hybrid vehicles, and other attractions are examples of large electric vehicles. • Electric cycles, golf carts, compact cars, forklifts, electric vehicle cleaning wheelchairs, and other light electric vehicles • Lawn movers, electric saws, and electric drills are all examples of power tools. • Remote-control toys, such as vehicles, boats, and planes • Solar and wind energy storage systems. • Emergency lights, warning lights, UPS, miner's lamp, etc. • Medical equipment and devices that are small and portable. The lithium ion battery market is estimated to increase at a CAGR of 12.6 percent from 2020 to 2027, reaching USD 3,203.01 million by 2027. The market is expanding due to the growing demand for lithium ion batteries in medical devices. Lithium ions flow from the negative electrode to the positive electrode through the electrolyte during charging and backwards during discharging in a lithium ion battery. These rechargeable batteries are widely utilised in consumer electronics and autos. Cathode, anode, separator, and electrolyte are the four components. Anode aids in the storage and release of lithium ions from the cathode, allowing current to flow through an external circuit. The lithium iron phosphate batteries market is expected to grow at a CAGR of 5.0 percent from an estimated USD 8.3 billion in 2019 to USD 10.6 billion by 2024. The increased focus on electric and hybrid electric vehicles, as well as rising demand for energy storage applications, are responsible for this expansion.
Plant capacity: Lithium Ion (LiFePO4) Battery Back of Power 4.8 KWH (No. of Cells 800) for Three Wheeler: 26 Nos. Per Day Lithium Ion (LiFePO4) Battery Back of Power 18 KWH (No. of Cells 3000) for Four Wheeler: 24 Nos. Per DayPlant & machinery: 3 Cr.
Working capital: -T.C.I: Cost of Project: 10.28 Cr
Return: 32.00%Break even: 57.00%
Add to Inquiry Add to Inquiry Basket

Setting up an E-Waste Recycling Plant

Electronic wastes, often known as "e-waste," "e-scrap," or "Waste Electrical and Electronic Equipment," or "WEEE," are surplus, obsolete, defective, or abandoned electrical or electronic devices. Electronic "waste" is defined as any component that is dumped, disposed of, or discarded rather than repurposed, and includes leftovers from reuse and recycling activities. Because a variety of surplus electronics are regularly delivered (good, recyclable, and non-recyclable), some public policy activists refer to all surplus electronics as "e-waste." WEEE has been identified as one of the fastest growing sources of waste, with an estimated annual growth rate of 16-28%. A complex set of heterogeneous secondary wastes is formed within each area. Despite the fact that treatment requirements are complex, the sources from each sector have several commonalities. Electrical and electronic equipment is made up of a variety of components, some of which include dangerous compounds that, if not handled appropriately, can have a negative influence on human health and the environment. These dangers are frequently caused by inefficient recycling and disposal methods. Carcinogens such as lead, barium, phosphor, and other heavy metals are abundant in Cathode Ray Tubes (CRTs). The global e-waste management market is anticipated to reach $49.4 billion by 2020, growing at a CAGR of 23.5 percent from 2014 to 2020. It is one of the most rapidly rising waste streams in both developing and industrialised countries. Electrical, electronic, and consumer electronic gadgets have shorter life lives, resulting in a considerable amount of E-Waste, which is expanding at a rapid rate every year. The growing need to upgrade to the latest technology is fueling the expansion of the E-Waste industry. The desire to adopt new technologically advanced equipment results in the development of millions of tonnes of E-Waste in various parts of the world. According to a UN project to assess E-Waste generation, the world created around 50 million tonnes of E-Waste in 2012, averaging 15 pounds per person globally. Government agencies in many locations are taking E-Waste management activities to limit the amount of E-Waste generated around the world. Market participants are taking steps to recycle E-Waste in order to reduce pollution and environmental risks associated with it. Key Players 1. E-Parisaraa Pvt. Ltd. 2. Ecocentric Management Pvt. Ltd. 3. Greenscape Eco Mgmt. Pvt. Ltd. 4. Navrachna Recycling Pvt. Ltd. 5. Sims Recycling Solutions India Pvt. Ltd.
Plant capacity: Plastic: 1.60 MT per day | Ferrous Material: 1.00 MT per day | Aluminium: 0.70 MT per day | Glass: 1.00 MT per day | Copper: 0.70 MT per dayPlant & machinery: 86 Lakh
Working capital: -T.C.I: Cost of Project: 314 Lakh
Return: 27.00%Break even: 60.00%
Add to Inquiry Add to Inquiry Basket

Solar Panel (both type of the PV Cells: Polycrystalline and Monocrystalline) 140 MW

A solar panel is made up of several solar modules that are wired together in series and parallel to give a certain voltage and current to charge a battery. Photovoltaic panels make up the solar array of a photovoltaic system, which generates and distributes solar power in commercial and residential settings. The DC output power of each module is rated under conventional test conditions and typically ranges from 100 to 365 watts. A single solar module can only provide a certain quantity of energy; therefore, most setups use numerous modules. A photovoltaic system consists of a panel or array of solar modules, a solar inverter, and, in certain cases, a battery and/or solar tracker, as well as interface cable. A photovoltaic (PV) module is a pre-assembled, plug-and-play assembly of 6-10 solar cells. Solar photovoltaic panels make up the solar array of a photovoltaic system, which generates and distributes solar power in commercial and residential settings. The DC output power of each module is rated under conventional test conditions and typically ranges from 100 to 365 watts. A single solar cell will not be able to deliver the necessary usable output. To boost the output power of a PV system, a number of such PV Solar Cells must be connected. A solar module is typically made up of a sufficient number of solar cells that are connected in series to generate the requisite standard output voltage and power. Large-scale solar applications, such as commercial and residential solar systems, typically use monocrystalline solar panels. They can also be used for smaller-scale applications, and the panel size is determined by the application. The most widely utilised PV panels on the planet are polycrystalline solar panels. They come in a variety of power levels, ranging from 5 W to 250 W or more, and can be used in both home and commercial settings. In the projected period 2021-2028, the global solar power market is estimated to increase at a CAGR of 6.9%, from $184.03 billion in 2021 to $293.18 billion in 2028. With the unrelenting shift toward renewable energy, the worldwide solar panel industry is accelerating. China, the world's largest exporter of solar panels, will benefit from strong global demand, while domestic sales may decrease as tariff subsidies are reduced. Because solar cells are becoming more affordable and suburban building is becoming stronger, the United States is seeing a rise in solar power output. Due to the rapid adoption of solar generation capacity, the EU, Asia-Pacific, Mexico, and Australia are also emerging as the most attractive markets. Distributed solar photovoltaic systems for residential, commercial, and industrial buildings appear to be a growing business segment around the world.
Plant capacity: Mono Crystalline Solar PV Module Capacity:250 Watt 466.8Nos/Day | Mono Crystalline Solar PV Module Capacity:320 Watt 364.6Nos/Day | Poly Crystalline Solar PV Module Capacity: 250 Watt466.8Nos/Day | PolyCrystalline Solar PV Module Capacity:320Watt364.6/dayPlant & machinery: 36.35 Cr
Working capital: -T.C.I: Cost of Project: 63.46 Cr
Return: 30.00%Break even: 44.00%
Add to Inquiry Add to Inquiry Basket

Active Pharma Ingredients Metformin and Ciprofloxacin Production Business

Metformin (also known as Glucophage) is an oral diabetes medication that helps the body use insulin more effectively and lower blood sugar levels. Metformin is a diabetes treatment that can be taken alone or with other diabetes drugs. It has no side effects like hypoglycemia or weight gain, which are common with other diabetic treatments. Metformin does not cure diabetes, but it can help you manage your blood sugar and lower your risk of problems if you take it as prescribed by your doctor. Metformin is the first-line treatment for type 2 diabetes, especially in overweight individuals, and is sold under the brand names Glucophage and others. Polycystic ovarian syndrome (PCOS) is also treated with it (PCOS). It's taken orally and hasn't been linked to weight gain. It's sometimes used off-label to aid people who take antipsychotics or phenelzine avoid gaining weight. Metformin is a biguanide, which is a type of antihyperglycemic medication. It works by lowering glucose production in the liver, improving insulin sensitivity in body tissues, and increasing GDF15 secretion to reduce hunger and calorie intake. Metformin is a drug that is used to treat high blood sugar levels caused by type 2 diabetes, sometimes known as sugar diabetes. In this type of diabetes, the pancreas' insulin is unable to carry sugar into the body's cells, where it can operate normally. Metformin can help lower blood sugar and restore the way you use food to make energy when it's too high, either alone or in combination with a type of oral antidiabetic medicine called a sulfonylurea, or insulin. Metformin is a drug that aids in the regulation of blood sugar levels in persons with type 2 diabetes. It's also used as a second-line treatment for infertility caused by polycystic ovarian syndrome. Infections of the urinary tract (not recommended as a first-line antibiotic) Ciprofloxacin is the active ingredient in Ciprofloxacin, an antibiotic. It prevents germs from copying their DNA, which is how it works. It's primarily used to treat infections of the urinary tract, respiratory tract, prostate gland, skin and soft tissue infections, and anthrax because of its broad spectrum of activity against Gram-positive and Gram-negative bacteria, as well as its ability to penetrate bacterial biofilms and stationary phase cells in both aerobic and anaerobic environments. In 1983, Bayer A.G. developed ciprofloxacin, which was approved by the US Food and Drug Administration (FDA) in 1987. The FDA has licenced ciprofloxacin for 12 human and veterinary uses, however it is routinely used for unapproved reasons (off-label). Antibiotics, herbal and natural supplements, and thyroid therapies are among the medications that interact with ciprofloxacin. • Acute uncomplicated cystitis in women • Chronic bacterial prostatitis in men (not recommended as a first-line antibiotic choice) • Respiratory tract infections are less common (not recommended as a first-line antibiotic choice) • Acute sinusitis (not recommended as a first-line antibiotic choice) • Infections of the skin and the tissues that support it • Infections of the bones and joints • Infectious diarrhoea • Salmonella typhi-caused typhoid fever (enteric fever) Metformin hydrochloride API producers are strengthening their manufacturing capacities to lessen their reliance on China as anti-China sentiment grows in India. Due to interruptions in supplies from China as a result of the COVID-19 pandemic, manufacturers have been ramping up domestic production of active medicinal components (APIs). Despite the fact that India is known as the world's pharmacy because to its vast production capabilities in generic pharmaceuticals and vaccines, China is proving to be a tough rival, accounting for half of worldwide API supply. Indian drug companies are seeking to domestic producers to minimise their reliance on China in the metformin hydrochloride API business, as ties between the two countries have improved since a deadly border clash in June 2020. The Indian ciprofloxacin market is likely to grow rapidly over the forecast period. The ciprofloxacin market in India is being driven by the increased prevalence of renal disorders and eye infections, among other things. Ciprofloxacin is a second-generation fluoroquinolone that is used to treat a range of ear infections, including otitis externa, which is expected to drive market growth through FY2026. In addition, the market is expected to grow in the next years as the demand for broad-spectrum antibiotics that can treat a wide range of gram-positive and gram-negative bacteria grows. Key Players: • Aarti Drugs Ltd. • Abhilasha Pharma Pvt. Ltd. • Auro Laboratories Ltd. • Corvine Chemicals & Pharmaceuticals Ltd. • Godavari Drugs Ltd. • Harman Finochem Ltd.
Plant capacity: Metformin: 2,000 Kgs. Per Day | Ciprofloxacin: 1,000 Kgs. Per DayPlant & machinery: 104 Lakhs
Working capital: N/AT.C.I: Cost of Project: 584 Lakhs
Return: 31.00%Break even: 58.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 16 of 34 | Total 337 projects in this category
« Previous   Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .... 33 34   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top