Home » Project Reports & Profiles » Start Manufacturing Of Aluminium Ingots From Aluminium Scrap

Google Search

Search

Already a Member ?

Start Manufacturing Of Aluminium Ingots From Aluminium Scrap

Aluminum is a light-weight silver-white metallic element that accounts for about 7% of the earth's crust. Steel (7480-8000 Kg/cubic metre) and copper (8930 Kg/cubic metre) weigh about a third as much. Aluminum is malleable, ductile, and easy to cast, with good corrosion resistance and durability. It is mined as bauxite ore and occurs predominantly as alumina when combined with oxygen. India possesses about 10% of the world's bauxite reserves and a bauxite-dependent aluminium industry. Demand is predicted to increase by 8-10% in the domestic market. India is estimated to have a capacity of 1.7 to 2 million tonnes of aluminium installed by 2020. Blooms, billets, and slabs are smaller casting results, whereas ingots are larger and more shaped. The cross section of an ingot is usually rectangular or square, but it is not required to be uniform across its length. (The cross section of the ingot may vary.) India's share of the global aluminium market is expected to be around 3%. After Australia (62 million tonnes), Guinea (17.50 million tonnes), Brazil (16.20 million tonnes), and China, India ranks fifth in bauxite output (10.75 mntonnes). With a total output of 9.25 million tonnes, India contributes around 6% of the world's total production of 159 million tonnes. India ranks sixth in reserves base, ahead of China with 2300 million tonnes. With a total output of 3 mntonnes, India ranked sixth in alumina production, accounting for approximately 5% of global production of 61 mntonnes. Aluminium is used in a wide range of applications, from aeroplane construction to packaging, with the electrical industry being a major consumer. The two sectors that account for more than half of the overall offtake are electricity and transportation. Power, transportation, consumer durables, packaging, and construction are the most important consumer industries in India. Power is the largest consumer (about 44% of total), followed by infrastructure (17%) and transportation (13%). (about 10 percent to 12 percent). Over the next five years, India's aluminium industry is expected to see a significant increase in demand. To add additional value to their downstream product portfolios, major companies are increasing large capacity and investing in new technology. This is being done to capitalise on rising demand in the building and construction sector, as well as transportation (metro and high-speed railway coaches), electrical and electronic consumer durables, and next-generation applications such as solar reflectors. Aluminum is also employed in the defence sector to make naval ships and surveillance drones. Few Indian Major Players 1. Aravali Infrapower Ltd. 2. Baheti Metal & Ferro Alloys Ltd. 3. Bothra Metals & Alloys Ltd. 4. Gravita India Ltd. 5. Indo Alusys Inds. Ltd. 6. Namo Alloys Pvt. Ltd. 7. Nealex Alloys Pvt. Ltd. 8. Perfect Alloys & Steel Ltd.
Plant capacity: Aluminium Alloy Ingots: 14 MT per day | Aluminium Scrap: 0.23 MT per dayPlant & machinery: 7 Cr
Working capital: -T.C.I: Cost of Project:Rs. 33.15 Cr
Return: 1.00%Break even: N/A
Email Us | Add to Inquiry Add to Inquiry Basket

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.


About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top