Home » Project Reports & Profiles » Aluminium Ingots From Aluminium Scrap

Google Search

Search

Already a Member ?

Aluminium Ingots From Aluminium Scrap

Ingots are very large casting products, greater in size and shape than blooms, billets and slabs. Ingot generally has rectangular/square cross section, but it is not necessary that it should be uniform throughout its length. (Ingot may have variable cross section.) Aluminium Alloy Ingots Like LM-2, LM-4, LM-6 which are commonly used in Gravity and Sand Casting, Pressure Die Casting Alloys like LM-13, LM-14, LM-24, ADC-12, ALSI-132 etc. are also being manufactured as per the Indian and International standards. India's share in world aluminium market is estimated at around 3%. India ranks fifth in bauxite production after Australia (62 mntonnes), Guinea (17.50 mntonne), Brazil (16.20 mntonne) and China (10.75 mntonnes). With a total output of 9.25 mntonnes, the country contributes about 6% of the world's total production of 159 mntonnes, India holds the fifth position in reserves base and is ahead of China with 2300 mntonnes. India ranked seventh in alumina production with a total output of 3 mntonnes, a share of nearly 5% of the global production of 61 mntonnes. The per capita consumption of aluminium in India continues to remain abysmally low at under 1 kg as against nearly 25 to 30 kg in the US and Europe, 15 kg in Japan, 10 kg in Taiwan and 3 kg in China. Aluminium has a wide range of applications, from aircraft building to packaging, a major consumer being the electrical industry. The two sectors, electricity and transportation, account for more than half of the total off take. The key consumer industries in India are power, transportation, consumer durables, packaging and construction. Of this, power is the biggest consumer (about 44% of total) followed by infrastructure (17%) and transportation (about 10% to 12%). In the transportation sector, aluminium is used for paneling, floors and windows. So far, it is not used for structural parts and bodies of automobiles. An Indian car uses only about 54 kg of aluminium against a global average of 100 to 110 kg. This sets the high potential for growth with the increase in the automobile sector. Aluminium ingots constitutes 25 to 30% of the total aluminium consumed in India. The market for aluminium ingots in India has been growing at around 12% per annum during the last few years. Jindal Aluminum and Hidalgo are the largest players in the Extrusion segment with combined market share of 30%. Other than FRP and Extrusion, Castings is one large segment which primarily serves the automotive market and mostly uses Aluminum in the Scrap form Few Indian major players are as under Nealex Alloys Pvt. Ltd. Namo Alloys Pvt. Ltd. Indo Alusys Inds. Ltd. Gravita India Ltd. Bothra Metals & Alloys Ltd. Baheti Metal & Ferro Alloys Ltd Aravali Infrapower Ltd.
Plant capacity: Aluminium Alloy Ingots: 40 MT / day Aluminium Scrap: 0.67 MT / dayPlant & machinery: Rs 196 lakhs
Working capital: -T.C.I: Cost of Project: Rs 702 lakhs
Return: 31.00%Break even: 64.00%
Email Us | Add to Inquiry Add to Inquiry Basket

We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.


About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Selection of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

^ Top