Google Search
Search
Already a Member ?
General
Lucrative Business and Investment Opportunities
Lucrative Business and Investment Opportunities
(NPCS Newsletter - Issue 102016)
Project Profiles of below projects can be viewed/ downloaded from http://www.niir.org/profiles/
Thermocol Cups, Plates & Glasses
Thermocol has a particular characteristic: it gives the hand a sensation of velvety softness not experienced in contact with traditional types of plastic. Until recently Thermocol has been employed almost exclusively in the packing and thermoacoustic isolation sectors; utilizing new processes and sophisticated equipment has been possible to create containers for foods with a perfect retention of liquids.
The disposable plastic cups, glass, plates and bowls are manufactured by thermoforming technique. They are fast replacing conventional cups, glass, plates and bowls. Ice-cream and other dairy products are packed in disposable cups. Besides Ice-cream industry, hotels, restaurants, canteens etc. have been increasingly using disposable items as against conventional glass-wares or ceramic cups, glass, plates and bowls.
Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchen ware to electric conductors and from railway wagon to Appollo spacecraft. Because of its intrinsic and versatile properties of lightness, strength to weight ratio, corrosion resistance, electrical and thermal conductivity, non toxicity etc., a wide range of uses has opened up for this metal.
Foil is a very thin sheet of rolled aluminium supplied in its pure form ('commercial purity') or in a variety of alloys and tempers which give a wide choice of tensile properties. The thickness of foil ranges from the thinnest currently produced commercially at about 0.0065 mm (or 6.5 µm) to the defined upper limit of 0.2 mm (or 200 µm).
Dairy Farming with Breeding and Dairy Products
Dairy farming has been part of agriculture for thousands of years, but historically, it was usually done on a small scale on mixed farms.But today, India derives nearly 33% of the gross Domestic population from agriculture and has 66% of economically active population, engaged in agriculture. The share of livestock product is estimated at 21% of total agriculture sector. Milk production alone involves more than 70 million producers, each raising one or two cows/buffaloes primarily for milk production.Milk is used as a food. It is used prepare curd, butter, ghee cream and ice cream etc. In addition to milk, the manure from animals provides a good source of organic matter for improving soil fertility and crop yields. The gobar gas from the dung is used as fuel for domestic purposes as also for running engines for drawing water from well. In Hinduism, cow urine has a special significance as a drink. Sprinkling of cow urine is said to have a spiritual cleansing effect as well. Gomutra is not a toxic waste material. 95% of it is water, 2.5% consists of urea, and the remaining 2.5% is a mixture of minerals, salts, hormones and enzymes.
The coconut is the most extensively grown and used nut in the world and the most important palm. The export of coconut and coconut products from India increased by 10.50 per cent to `1450.24 crore in 2015-2016. The increase in quantity exported of desiccated coconut, coconut oil and activated carbon when compared to previous year was 63, 23 and 13 per cent respectively. There are greater prospects for exports of coconut oil, virgin coconut oil and desiccated coconut from India in 2016-17 as the prevailing domestic price is less when compared to the international market.
Virgin coconut oil (VCO) is growing in popularity as functional food oil and the public awareness of it is increasing. It is expected that VCO will experience a dramatic growth in the market.
Precipitated Silica from Rice Husk Ash
Rice milling generates a byproduct known as husk. This surrounds the paddy grain. During milling of paddy about 78 % of weight is received as rice, broken rice and bran.Rest 22 % of the weight of paddy is received as husk. This husk is used as fuel in the rice mills to generate steam for the parboiling process. This husk contains about 75 % organic volatile matter and the balance 25 % of the weight of this husk is converted into ash during the firing process, is known as rice husk ash (RHA). This RHA in turn contains around 85 % - 90 % amorphous silica.
Precipitated silica is used as filler for paper & rubber as a carrier & diluents for agricultural chemicals, as an anti-caking agent, to control viscosity & thickness and as a cleansing agent in toothpastes & in cosmetics.
Jeans are trousers, a type of garment, typically made from denimor dungareecloth. They come in many styles and colors. Jeans are dyed in every color of the rainbow. There are several advantages associated with denim jeans, which emerge when the denim jeans are compared with other types of clothing. It is on the basis of this advantage that people often opt to buy the denim jeans rather than other varieties of clothing (even when some of those others are considerably cheaper).One of those advantages of denim jeans over other types of clothing is in the fact that denim jeans tend to be highly durable.
Red Oxide Zinc Chromate Primer
A primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted.
Zinc chromate and red oxide are two pigments that are commonly used in metal primers. Zinc chromate provides more corrosion resistance than red oxide, although red oxide is excellent for exposure to sunlight and exterior exposure. Concerned about corrosion, zinc chromate will give better corrosion resistance.
The Indian paint industry has been growing at an average 15% per annum over the last decade. Growth has been consistent with the Indian GDP growth rate and in some years the industry has grown at a rate of 1.5 to 2 times higher than that of GDP growth. Construction remains the key growth sector and is driving demand for decorative and protective coatings. The sector accounts for nearly 45% of the total national investment in infrastructure and the trend is expected to continue in the future.
Fiberboard is a type of engineered wood product that is made out of wood fibers. Types of fiberboard (in order of increasing density) include particle board, medium-density fiberboard, and hardboard. Fiberboard, particularly medium-density fiberboard (MDF), is heavily used in the furniture industry.
MDF does not contain knots or rings, making it more uniform than natural woods during cutting and in service.However, MDF is not entirely isotropic, since the fibres are pressed tightly together through the sheet.
MDF may be glued, doweled or laminated. Typical fasteners are T-nuts and pan-head machine screws. Smooth-shank nails do not hold well, and neither do fine-pitch screws, especially in the edge. Special screws are available with a coarse thread pitch, but sheet-metal screws also work well. Like natural wood, MDF may split when woodscrews are installed without pilot holes.
It is difficult to conceive the contemporary architecture without glass.Glass is a non-crystalline amorphous solid that is often transparent and has widespread practical,technological, and decorative usage in, for example, window panes, tableware,and optoelectronics.Common glasses contain about 70% SiO2 Sodium carbonate, or soda ash decomposes, to sodium oxides as the batch of raw material melts. Consequentlyit acts as a flux.
Toughened or tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. A fully tempered glass is 4 to 5 times stronger than an annealed glass of similar thickness.
Market Survey Cum Detailed Techno Economic Feasibility Report on above projects can be had from NPCS
Download Monthly Issues of Entrepreneur India (an Industrial Monthly Journal on Industrial Development Technologies & Project Opportunities)
http://www.niir.org/contact/entrepreneur.phtml
http://www.entrepreneurindia.co/entrepreneur
Our New Releases:
1. The Complete Book on Tomato & Tomato Products Manufacturing (Cultivation & Processing)
2. The Complete Book on Cold Storage, Cold Chain & Warehouse (with Controlled Atmosphere Storage & Rural Godowns)
3. Herbal Cosmetics Handbook (3rd Revised Edition)
4. The Complete Book on Beekeeping and Honey Processing (2nd Revised Edition)
5. The Complete Book on Onion & Garlic Cultivation with Processing (Production of Onion Paste, Flakes, Powder & Garlic Paste, Powder, Flakes, Oil)
6. Best Businesses You Can Start with Low Cost
7. The Complete Book on Waste Treatment Technologies (Industrial, Biomedical, Water, Electronic, Municipal, Household/ Kitchen, Farm Animal, Dairy, Poultry, Meat, Fish & Sea Food Industry Waste)
8. The Complete Technology Book on Processing, Dehydration, Canning, Preservation of Fruits & Vegetables (3rd Revised Edition)
9. Start-Up Projects for Entrepreneurs: 50 Highly Profitable Small & Medium Industries
10. Modern Technology of Textile Dyes & Pigments (2nd Revised Edition)
11. The Complete Technology Book on Textile Spinning, Weaving, Finishing and Printing (2nd Revised Edition)
12. The Complete Technology Book on Asbestos, Cement, Ceramics and Limestone
13.Handbook on Coal, Lignin, Wood and Rosin Processing
14. Handbook on Natural Dyes for Industrial Applications (Extraction of Dyestuff from Flowers, Leaves, Vegetables) 2nd Revised Edition
15. Laghu V Kutir Udyog (Small Scale Industries) 4th Revised Edition (Hindi Language) लघुवकुटीरउद्योग(स्मॉलस्केलइण्डस्ट्रीज़)
16.How to Start Profitable Education Business (11 Detailed Project Profiles) (Engineering, Dental, ITI, Management, Marine Engineering, Medical, Pharmacy, Polytechnic College and Schools)
17.The Complete Book on Cultivation and Manufacture of Tea (2nd Revised Edition)
18. Handbook on Pig Farming and Pork Processing (Feeding Management, Breeding, Housing Management, Sausages, Bacon, Cooked Ham with Packaging)
NIIR PROJECT CONSULTANCY SERVICES
AN ISO 9001 : 2008 CERTIFIED COMPANY
106-E, Kamla Nagar, Delhi – 110 007 (India)
Tel: 91-11-23843955, 23845886, 23845654, +918800733955
Fax: 91-11-23841561
E-mail: [email protected]
Website: www.niir.org
Take a look at NIIR PROJECT CONSULTANCY SERVICES on #StreetView - https://goo.gl/XPqPAj
Locate us on Google mapshttps://goo.gl/maps/BKkUtq9gevT2
Visit URLfor"Free Instant Online Project Identification & Selection" search facility to identify projects based on multiple search parameters related to project costs namely: Plant & Machinery Cost, Total Capital Investment, Cost of the project, Rate of Return% (ROR) and Break Even Point % (BEP). You can sort the projects on the basis of mentioned pointers and identify a suitable project matching your investment requisites.
http://www.entrepreneurindia.co/project-identification
FOLLOW US:
https://www.linkedin.com/company/niir-project-consultancy-services
https://www.facebook.com/NIIR.ORG
https://www.youtube.com/user/NIIRproject
https://plus.google.com/+NIIRPROJECTCONSULTANCYSERVICESNewDelhi/posts
https://plus.google.com/+EntrepreneurIndiaNewDelhi
NIIR PROJECT CONSULTANCY SERVICES
AN ISO 9001 : 2008 CERTIFIED COMPANY
106-E, Kamla Nagar, Delhi – 110 007 (India)
Tel: 91-11-23843955, 23845886, 23845654, +918800733955
Fax: 91-11-23841561
E-mail: [email protected]
Website: www.niir.org
To Unsubscribe or change your email preferences, please go to: http://www.niir.org/newsletter/
