Electrical, Electronic Industries and Power Projects

Electric equipment industry contributes over 2% of GDP which is projected to increase to about 12% in 2015 according to a study by Frost & Sullivan. During the period, consumption of electrical equipment is estimated to increase from over USD 28 billion now to USD 363 billion, growing at a CAGR of about 30%. It is also expected that during 2010-2015, the Indian equipment manufacturing will grow at 5.5 times the growth rate of global electronic equipment production.

The electrical equipment and accessories industry, with its highly diversified content, may be broadly segmented into (i) generation equipment, (ii) transmission equipment, and (iii) distribution equipment. The equipments and accessories under these segments include motors, turbines, generators, switchgears, transformers, circuit breakers, induction motors, power capacitors, meters, transmission towers. Besides these, the spectrum covers a whole range of power cables including XLPE and AAC and ACSR conductors and electrical consumer products like fans, electric lamps, exhausts and domestic appliances and accessories. Inverters, gensets, UP also fall under its domain.

The electrical industry has been showing signs of recovery after poor performance in the recent years. The domestic electrical industry, which includes equipment for generation, transmission, distribution and use of power in industrial units, constitutes a major part of the electrical products.

The growth of the industry is directly related to the development of power generation and distribution. India's generation capacity of 2,300 MW in 1950 expanded to over 116,500 MW including non-utilities at the end 2000-01. The total installed capacity of electric power generation further increased to 141,080 MW in 2007-08 (upto January 2008) compared to a capacity of 128,000 MW during the same period in 2006-07. The Eleventh Plan has targeted a capacity addition of 78,570 MW.

The five years (2007-2012) may be the best of times for power equipment makers with the power sector on an expansion spree. With order-book growth expanding over the last three years, there is a good chance that this will continue. Close to 82% of the planned generation capacity for the Tenth Plan was either implemented or was in the process of being implemented. Even assuming a 70% implementation ratio for the Eleventh Plan, close to 55,000 MW will be added. Five ultra mega power projects, totaling 20,000 MW are coming up in 2008. In the transmission sector, for example, Power Grid Corporation is planning a capex of Rs 710 billion by 2010.

Earlier, the shortfalls in achieving the Plan targets of addition to power generation and up-gradation of transmission and distribution had adversely affected the electrical equipment industry. The peak shortage which was over 11% of the requirement in 2003-04 increased to 11.7% in 2004-05 and to over 12% in 2005-06. The shortage further rose to about 14% in 2006-07. In the ten months of 2007-08 the peak shortage had risen to over 15% of the peak demand of 107,010 MW.

Major players in electrical equipment segment are ABB, BHEL, BHEL Power Solutions, Havell's India, Kirloskar Electric, Crompton Greaves and Suzlon Energy.

According to the Power Ministry, the power sector has tied up Rs 2,240 billion worth of investments to build power plants with 70,000 MW capacities in the next three years.

With some fast moves at launching fast track projects to augment supplies, the Indian industry needs to improve its competitiveness. The Indian market is growing and multinationals with newer technologies are now more active.


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the cost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics.

Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

We can modify the project capacity and project cost as per your requirement.
We can also prepare project report on any subject as per your requirement.

Page 1 of 7 | Total 65 projects in this category
«   Page 1 2 3 4 5 6 7   Next »

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Select all | Clear all Sort by

Voltage Stabilizer using IC Timer

Stabilizer are widely used to provide stabilized voltage to various items like Regrigerator, Television, Typewriter, and for various household purposes. The production of consumer electronics has increased during the last few years and so the stabilizer has found increased use. The stabilizer using IC Timer has got advantage of the other stabilizer. So it has very good demand. This high performance stabilizer can be constructed to protect the delicate electronic equipments from damage due to sustained abnormal mains voltages by using an IC LM556, an active component in the circuit. With the demand for his stabilizer being on the increase, a new entrepreneur may invest in this unit as it has very good potential for commercial market.
Plant capacity: 60 Nos./DayPlant & machinery: Rs. 4 Lacs
Working capital: Rs. 9 LacsT.C.I: Rs. 21 Lacs
Return: 64.82%Break even: 40.62%
Add to Inquiry Add to Inquiry Basket

Alternator

The electrical machine which generates alternating currents, is known as A.C. generator or alternator. It consists of two parts essentially, magnet system and an armature. To meet the power requirements of domestic, commercial and industrial activities, it has now become the fashion of the day to install stand by generators. This envisages a good market for all rating alternators in domestic and commercial applications.
Plant capacity: 240 Alternators/AnnumPlant & machinery: Rs. 4 Lakhs
Working capital: Rs. 9 LakhsT.C.I: Rs. 30 Lakhs
Return: 26.70%Break even: 62.33%
Add to Inquiry Add to Inquiry Basket

Dry Cell

A dry cell battery is a device, which converse chemical energy into electrical energy based on size. The growth of pencil-size battery is enormous in few years due to photography industries, the growing popularly of cable TV network have translated into an enhanced demand for TVs with remote control facilities & the demand of quartz wall clock. The demand for dry cell batteries, specially the small or the permit segment is slated to grow at a healthy pace of over 15%.
Plant capacity: 400 Nos/DayPlant & machinery: Rs. 4 Lakhs
Working capital: Rs. 10 LakhsT.C.I: Rs. 21 Lakhs
Return: 45.12%Break even: 50.39%
Add to Inquiry Add to Inquiry Basket

Multilayer Printed Circuit Boards

Printed circuits are components in almost all electronic assemblies. Printed circuit board are metal clad laminates that are used to define wiring scheme for an electronics circuit. It consists of an insulating laminate over which metal has been deposited or clad. As PCB are used to transmit power from one end to another they are used in all electronic equipment, however design, size, weight etc. of PCB change from application to application. Multiplayer PCB are used in computer and defense equipments. PCB is manufactured both in organized and small scale sectors. At present, there are about 50 units in the organized and many more units in the small scale sector to manufacture PCB. Almost 90 per cent of the total production of PCB is being contributed by small scale sector which has kept a pace with the growth of the electronic equipment industry. The demand for multiplayer printed circuit board. You can well venture in this project.
Plant capacity: 60.0 Sq. mts./DayPlant & machinery: Rs. 75 Lakhs
Working capital: Rs. 40.0 LakhsT.C.I: Rs. 144 Lakhs
Return: 50.30%Break even: 43.89%
Add to Inquiry Add to Inquiry Basket

Microwave Oven

Microwave ovens are the latest addition to the range of electronic consumer products. These ovens are used to cook, roast, steam, thaw, stew, bake, reheat meltetc. Cooking in microwave oven can be done in about one-third time taken by conventional method. Out of the total, it is understood that about 60% i.e. 1,38,940 number is used by household sector while 40% i.e. 92627 numbers is used by hotels, restaurant etc. As far as future is concerned, it will depend upon the number of families in upper middle and rich classes in urban area. The demand for microwave oven from non house hold sector will also increase with increase in number of hotels, restaurants and also with increasing use of fast foods and ready to eat food. Keeping both these sector in view, the demand for microwave oven is estimated to increase at the rate of 30 percent per annum in next five years. There is wide gap between demand and supply. Any entrepreneur can come in this field.
Plant capacity: 25 Nos/DayPlant & machinery: Rs. 16.0 Lakhs
Working capital: Rs. 48 LakhsT.C.I: Rs. 85 Lakhs
Return: 70.52%Break even: 37.72%
Add to Inquiry Add to Inquiry Basket

Wind Mill

Non-conventional and renewable sources of energy have come to assume tremendous significance both as alternative or substitute and also as viable supplement to conventional sources of energy. The need for development of non-conventional sources has been strengthened in view of the increasing population, faster pace of economic development and industrialization and gradual depletion of the conventional fossil based energy sources. Along with it the growing concern of the environmental activities has forced governments all over the world to think of ways to tap and generate additional sources of energy to meet the growing demands of the teeming millions. There is good scope of wind mill. A new strategy to attract private investment in commercial projects was adopted.
Plant capacity: 30 Nos./DayPlant & machinery: Rs. 17 Lakhs
Working capital: Rs. 86 LakhsT.C.I: Rs. 137.0 Lakhs
Return: 52.70%Break even: 40.81%
Add to Inquiry Add to Inquiry Basket

Rosin Cored Soft Soldering Wire

Soldering is a process of joining solid components by introduction between them a molten alloy (solder) having a lower melting poing than that of the base metal components being joined. Apart from electrical & electronics, soldering is applied in plumbing, manufacture of rediators, sealing of tin cans etc. Not only tin and lead are used to manufacture of solder, but depending upon the application other constituents are also used. Since the bulkconsumer is the electrical and electronic industries, the development in these industries ensures the growth in demand of the solder. This is a very small scale industry.
Plant capacity: 500 Kg Soldering Wire/DayPlant & machinery: Rs. 38.40 Lacs
Working capital: Rs. 86.65 LacsT.C.I: Rs. 35.70 Lacs
Return: N/ABreak even: N/A
Add to Inquiry Add to Inquiry Basket

Immersion Heater

The immersion heater is very popular electric device used for domestic as well as industrial purposes. In industry it is used for spattering & to concentrate or evaporate the acid solution without ebullition or spattering. Principle of working is to convert electrical energy into heat energy by passing electrical energy through certain materials. There are various acceptance tests for the product.
Plant capacity: 200 Nos./DayPlant & machinery: Rs. 2 Lakhs
Working capital: Rs. 28 LakhsT.C.I: Rs. 36 Lakhs
Return: 75.00%Break even: 39.00%
Add to Inquiry Add to Inquiry Basket

Printed Circuit Board

Printed circuit board (PCB) are metal clad laminates that are used to define wiring scheme for an electronic circuit. It consists of an insulating laminate over which metal has been deposited or clad. As PCB are used to transmit power from one end to another they are used in all electronic equipment. However design, size, weight etc. of PCB change from application to application. PCB is manufactured both in organized and small scale sectors. At present there are about 50 units in the organized and many more units in small scale sector to manufacture PCB. There is very good scope for new entrant. He can install of this project.
Plant capacity: 14.00 Sq.M./DayPlant & machinery: Rs. 7 Lacs
Working capital: Rs. 12 LacsT.C.I: Rs. 36 Lacs
Return: 38.07%Break even: 53.16%
Add to Inquiry Add to Inquiry Basket

Electronic Digital Weighing Machine

Automatic production in industry has brought increasing need for high speed weighing information for election or control should be available at a rate that will not retard the flow of the product on the assembly lines. The digital weighing machine provides a means for obtaining weight rapidly and accurately. Digital electronic weighing machines are specially used in commercial as well as in business fields. In industries such type of machine find application for weight measurement. Due to good accuracy and sensitivity of such products; being used in banks, post office market etc. There are very few organizations in India manufacturing electronic digital weighing machine. There is good scope for new investment.
Plant capacity: 50 Nos./DayPlant & machinery: 6 Lakhs
Working capital: -T.C.I: 147 Lakhs
Return: 55.00%Break even: 32.00%
Add to Inquiry Add to Inquiry Basket

Information
  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

Add multiple items to inquiry
Select the items and then press Add to inquiry button

Page 1 of 7 | Total 65 projects in this category
«   Page 1 2 3 4 5 6 7   Next »

About NIIR PROJECT CONSULTANCY SERVICES

Hide »

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. Its various services are: Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Preparation of Project Profiles and Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects and industry.

NPCS also publishes varies technology books, directory, databases, detailed project reports, market survey reports on various industries and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by Indian and overseas professionals including project engineers, information services bureau, consultants and consultancy firms as one of the input in their research.

^ Top

Products & Services

Others

Contact Us

My Account

Help

Payment Options

  • Credit Cards
  • Debit Cards
  • PayPal
  • Net Banking - (All Major Indian Banks)

We Process

  • Cards

Google Search


Search Project Report & Profiles





Subjects